aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/pata_pdc2027x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_pdc2027x.c')
-rw-r--r--drivers/ata/pata_pdc2027x.c305
1 files changed, 116 insertions, 189 deletions
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index bb64a986e8f..4d06a5cda98 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -25,7 +25,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
@@ -39,7 +38,7 @@
#undef PDC_DEBUG
#ifdef PDC_DEBUG
-#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
#else
#define PDPRINTK(fmt, args...)
#endif
@@ -63,13 +62,16 @@ enum {
};
static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void pdc2027x_error_handler(struct ata_port *ap);
+#ifdef CONFIG_PM_SLEEP
+static int pdc2027x_reinit_one(struct pci_dev *pdev);
+#endif
+static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask);
static int pdc2027x_cable_detect(struct ata_port *ap);
-static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed);
+static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed);
/*
* ATA Timing Tables based on 133MHz controller clock.
@@ -126,110 +128,46 @@ static struct pci_driver pdc2027x_pci_driver = {
.id_table = pdc2027x_pci_tbl,
.probe = pdc2027x_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ata_pci_device_suspend,
+ .resume = pdc2027x_reinit_one,
+#endif
};
static struct scsi_host_template pdc2027x_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .ioctl = ata_scsi_ioctl,
- .queuecommand = ata_scsi_queuecmd,
- .can_queue = ATA_DEF_QUEUE,
- .this_id = ATA_SHT_THIS_ID,
- .sg_tablesize = LIBATA_MAX_PRD,
- .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
- .emulated = ATA_SHT_EMULATED,
- .use_clustering = ATA_SHT_USE_CLUSTERING,
- .proc_name = DRV_NAME,
- .dma_boundary = ATA_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
- .slave_destroy = ata_scsi_slave_destroy,
- .bios_param = ata_std_bios_param,
+ ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations pdc2027x_pata100_ops = {
- .port_disable = ata_port_disable,
- .mode_filter = ata_pci_default_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
+ .inherits = &ata_bmdma_port_ops,
.check_atapi_dma = pdc2027x_check_atapi_dma,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = pdc2027x_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = pdc2027x_cable_detect,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
-
- .port_start = ata_port_start,
+ .prereset = pdc2027x_prereset,
};
static struct ata_port_operations pdc2027x_pata133_ops = {
- .port_disable = ata_port_disable,
+ .inherits = &pdc2027x_pata100_ops,
+ .mode_filter = pdc2027x_mode_filter,
.set_piomode = pdc2027x_set_piomode,
.set_dmamode = pdc2027x_set_dmamode,
.set_mode = pdc2027x_set_mode,
- .mode_filter = pdc2027x_mode_filter,
-
- .tf_load = ata_tf_load,
- .tf_read = ata_tf_read,
- .check_status = ata_check_status,
- .exec_command = ata_exec_command,
- .dev_select = ata_std_dev_select,
-
- .check_atapi_dma = pdc2027x_check_atapi_dma,
- .bmdma_setup = ata_bmdma_setup,
- .bmdma_start = ata_bmdma_start,
- .bmdma_stop = ata_bmdma_stop,
- .bmdma_status = ata_bmdma_status,
- .qc_prep = ata_qc_prep,
- .qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_data_xfer,
-
- .freeze = ata_bmdma_freeze,
- .thaw = ata_bmdma_thaw,
- .error_handler = pdc2027x_error_handler,
- .post_internal_cmd = ata_bmdma_post_internal_cmd,
- .cable_detect = pdc2027x_cable_detect,
-
- .irq_clear = ata_bmdma_irq_clear,
- .irq_on = ata_irq_on,
- .irq_ack = ata_irq_ack,
-
- .port_start = ata_port_start,
};
static struct ata_port_info pdc2027x_port_info[] = {
/* PDC_UDMA_100 */
{
- .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
- ATA_FLAG_MMIO,
- .pio_mask = 0x1f, /* pio0-4 */
- .mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = ATA_UDMA5, /* udma0-5 */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA5,
.port_ops = &pdc2027x_pata100_ops,
},
/* PDC_UDMA_133 */
{
- .flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
- ATA_FLAG_MMIO,
- .pio_mask = 0x1f, /* pio0-4 */
- .mwdma_mask = 0x07, /* mwdma0-2 */
- .udma_mask = ATA_UDMA6, /* udma0-6 */
+ .flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
.port_ops = &pdc2027x_pata133_ops,
},
};
@@ -277,7 +215,7 @@ static int pdc2027x_cable_detect(struct ata_port *ap)
u32 cgcr;
/* check cable detect results */
- cgcr = readl(port_mmio(ap, PDC_GLOBAL_CTL));
+ cgcr = ioread32(port_mmio(ap, PDC_GLOBAL_CTL));
if (cgcr & (1 << 26))
goto cbl40;
@@ -295,12 +233,12 @@ cbl40:
*/
static inline int pdc2027x_port_enabled(struct ata_port *ap)
{
- return readb(port_mmio(ap, PDC_ATA_CTL)) & 0x02;
+ return ioread8(port_mmio(ap, PDC_ATA_CTL)) & 0x02;
}
/**
* pdc2027x_prereset - prereset for PATA host controller
- * @ap: Target port
+ * @link: Target link
* @deadline: deadline jiffies for the operation
*
* Probeinit including cable detection.
@@ -309,27 +247,12 @@ static inline int pdc2027x_port_enabled(struct ata_port *ap)
* None (inherited from caller).
*/
-static int pdc2027x_prereset(struct ata_port *ap, unsigned long deadline)
+static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline)
{
/* Check whether port enabled */
- if (!pdc2027x_port_enabled(ap))
+ if (!pdc2027x_port_enabled(link->ap))
return -ENOENT;
- return ata_std_prereset(ap, deadline);
-}
-
-/**
- * pdc2027x_error_handler - Perform reset on PATA port and classify
- * @ap: Port to reset
- *
- * Reset PATA phy and classify attached devices.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void pdc2027x_error_handler(struct ata_port *ap)
-{
- ata_bmdma_drive_eh(ap, pdc2027x_prereset, ata_std_softreset, NULL, ata_std_postreset);
+ return ata_sff_prereset(link, deadline);
}
/**
@@ -346,23 +269,22 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
struct ata_device *pair = ata_dev_pair(adev);
if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
- return ata_pci_default_filter(adev, mask);
+ return mask;
/* Check for slave of a Maxtor at UDMA6 */
ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
ATA_ID_PROD_LEN + 1);
/* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
- if(strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
+ if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
- return ata_pci_default_filter(adev, mask);
+ return mask;
}
/**
* pdc2027x_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port to configure
* @adev: um
- * @pio: PIO mode, 0 - 4
*
* Set PIO mode for device.
*
@@ -387,16 +309,16 @@ static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev)
/* Set the PIO timing registers using value table for 133MHz */
PDPRINTK("Set pio regs... \n");
- ctcr0 = readl(dev_mmio(ap, adev, PDC_CTCR0));
+ ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
ctcr0 &= 0xffff0000;
ctcr0 |= pdc2027x_pio_timing_tbl[pio].value0 |
(pdc2027x_pio_timing_tbl[pio].value1 << 8);
- writel(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
+ iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
- ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1));
+ ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
ctcr1 &= 0x00ffffff;
ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24);
- writel(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
+ iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
PDPRINTK("Set pio regs done\n");
@@ -407,7 +329,6 @@ static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev)
* pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings
* @ap: Port to configure
* @adev: um
- * @udma: udma mode, XFER_UDMA_0 to XFER_UDMA_6
*
* Set UDMA mode for device.
*
@@ -430,18 +351,18 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
* If tHOLD is '1', the hardware will add half clock for data hold time.
* This code segment seems to be no effect. tHOLD will be overwritten below.
*/
- ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1));
- writel(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1));
+ ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
+ iowrite32(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1));
}
PDPRINTK("Set udma regs... \n");
- ctcr1 = readl(dev_mmio(ap, adev, PDC_CTCR1));
+ ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
ctcr1 &= 0xff000000;
ctcr1 |= pdc2027x_udma_timing_tbl[udma_mode].value0 |
(pdc2027x_udma_timing_tbl[udma_mode].value1 << 8) |
(pdc2027x_udma_timing_tbl[udma_mode].value2 << 16);
- writel(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
+ iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
PDPRINTK("Set udma regs done\n");
@@ -453,13 +374,13 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
unsigned int mdma_mode = dma_mode & 0x07;
PDPRINTK("Set mdma regs... \n");
- ctcr0 = readl(dev_mmio(ap, adev, PDC_CTCR0));
+ ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
ctcr0 &= 0x0000ffff;
ctcr0 |= (pdc2027x_mdma_timing_tbl[mdma_mode].value0 << 16) |
(pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24);
- writel(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
+ iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
PDPRINTK("Set mdma regs done\n");
PDPRINTK("Set to mdma mode[%u] \n", mdma_mode);
@@ -470,40 +391,37 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
/**
* pdc2027x_set_mode - Set the timing registers back to correct values.
- * @ap: Port to configure
+ * @link: link to configure
* @r_failed: Returned device for failure
*
* The pdc2027x hardware will look at "SET FEATURES" and change the timing registers
* automatically. The values set by the hardware might be incorrect, under 133Mhz PLL.
* This function overwrites the possibly incorrect values set by the hardware to be correct.
*/
-static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed)
+static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed)
{
- int i;
-
- i = ata_do_set_mode(ap, r_failed);
- if (i < 0)
- return i;
+ struct ata_port *ap = link->ap;
+ struct ata_device *dev;
+ int rc;
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
- struct ata_device *dev = &ap->device[i];
+ rc = ata_do_set_mode(link, r_failed);
+ if (rc < 0)
+ return rc;
- if (ata_dev_enabled(dev)) {
+ ata_for_each_dev(dev, link, ENABLED) {
+ pdc2027x_set_piomode(ap, dev);
- pdc2027x_set_piomode(ap, dev);
+ /*
+ * Enable prefetch if the device support PIO only.
+ */
+ if (dev->xfer_shift == ATA_SHIFT_PIO) {
+ u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1));
+ ctcr1 |= (1 << 25);
+ iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
- /*
- * Enable prefetch if the device support PIO only.
- */
- if (dev->xfer_shift == ATA_SHIFT_PIO) {
- u32 ctcr1 = readl(dev_mmio(ap, dev, PDC_CTCR1));
- ctcr1 |= (1 << 25);
- writel(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
-
- PDPRINTK("Turn on prefetch\n");
- } else {
- pdc2027x_set_dmamode(ap, dev);
- }
+ PDPRINTK("Turn on prefetch\n");
+ } else {
+ pdc2027x_set_dmamode(ap, dev);
}
}
return 0;
@@ -563,14 +481,12 @@ static long pdc_read_counter(struct ata_host *host)
u32 bccrl, bccrh, bccrlv, bccrhv;
retry:
- bccrl = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
- bccrh = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
- rmb();
+ bccrl = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
+ bccrh = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
/* Read the counter values again for verification */
- bccrlv = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
- bccrhv = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
- rmb();
+ bccrlv = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
+ bccrhv = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
counter = (bccrh << 15) | bccrl;
@@ -619,7 +535,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
/* Show the current clock value of PLL control register
* (maybe already configured by the firmware)
*/
- pll_ctl = readw(mmio_base + PDC_PLL_CTL);
+ pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
PDPRINTK("pll_ctl[%X]\n", pll_ctl);
#endif
@@ -659,8 +575,8 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl);
- writew(pll_ctl, mmio_base + PDC_PLL_CTL);
- readw(mmio_base + PDC_PLL_CTL); /* flush */
+ iowrite16(pll_ctl, mmio_base + PDC_PLL_CTL);
+ ioread16(mmio_base + PDC_PLL_CTL); /* flush */
/* Wait the PLL circuit to be stable */
mdelay(30);
@@ -670,7 +586,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
* Show the current clock value of PLL control register
* (maybe configured by the firmware)
*/
- pll_ctl = readw(mmio_base + PDC_PLL_CTL);
+ pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
PDPRINTK("pll_ctl[%X]\n", pll_ctl);
#endif
@@ -693,10 +609,10 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
long pll_clock, usec_elapsed;
/* Start the test mode */
- scr = readl(mmio_base + PDC_SYS_CTL);
+ scr = ioread32(mmio_base + PDC_SYS_CTL);
PDPRINTK("scr[%X]\n", scr);
- writel(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL);
- readl(mmio_base + PDC_SYS_CTL); /* flush */
+ iowrite32(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL);
+ ioread32(mmio_base + PDC_SYS_CTL); /* flush */
/* Read current counter value */
start_count = pdc_read_counter(host);
@@ -710,10 +626,10 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
do_gettimeofday(&end_time);
/* Stop the test mode */
- scr = readl(mmio_base + PDC_SYS_CTL);
+ scr = ioread32(mmio_base + PDC_SYS_CTL);
PDPRINTK("scr[%X]\n", scr);
- writel(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL);
- readl(mmio_base + PDC_SYS_CTL); /* flush */
+ iowrite32(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL);
+ ioread32(mmio_base + PDC_SYS_CTL); /* flush */
/* calculate the input clock in Hz */
usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 +
@@ -745,10 +661,7 @@ static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
*/
pll_clock = pdc_detect_pll_input_clock(host);
- if (pll_clock < 0) /* counter overflow? Try again. */
- pll_clock = pdc_detect_pll_input_clock(host);
-
- dev_printk(KERN_INFO, host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
+ dev_info(host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
/* Adjust PLL control register */
pdc_adjust_pll(host, pll_clock, board_idx);
@@ -788,18 +701,19 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
* @pdev: instance of pci_dev found
* @ent: matching entry in the id_tbl[]
*/
-static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+static int pdc2027x_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
- static int printed_version;
+ static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 };
+ static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 };
unsigned int board_idx = (unsigned int) ent->driver_data;
const struct ata_port_info *ppi[] =
{ &pdc2027x_port_info[board_idx], NULL };
struct ata_host *host;
void __iomem *mmio_base;
- int rc;
+ int i, rc;
- if (!printed_version++)
- dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ ata_print_version_once(&pdev->dev, DRV_VERSION);
/* alloc host */
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
@@ -826,10 +740,15 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
mmio_base = host->iomap[PDC_MMIO_BAR];
- pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0);
- host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000;
- pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0);
- host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008;
+ for (i = 0; i < 2; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]);
+ ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i];
+
+ ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
+ ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd");
+ }
//pci_enable_intx(pdev);
@@ -838,25 +757,33 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
return -EIO;
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
- &pdc2027x_sht);
+ return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
+ IRQF_SHARED, &pdc2027x_sht);
}
-/**
- * pdc2027x_init - Called after this module is loaded into the kernel.
- */
-static int __init pdc2027x_init(void)
+#ifdef CONFIG_PM_SLEEP
+static int pdc2027x_reinit_one(struct pci_dev *pdev)
{
- return pci_register_driver(&pdc2027x_pci_driver);
-}
+ struct ata_host *host = pci_get_drvdata(pdev);
+ unsigned int board_idx;
+ int rc;
-/**
- * pdc2027x_exit - Called before this module unloaded from the kernel
- */
-static void __exit pdc2027x_exit(void)
-{
- pci_unregister_driver(&pdc2027x_pci_driver);
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 ||
+ pdev->device == PCI_DEVICE_ID_PROMISE_20270)
+ board_idx = PDC_UDMA_100;
+ else
+ board_idx = PDC_UDMA_133;
+
+ if (pdc_hardware_init(host, board_idx))
+ return -EIO;
+
+ ata_host_resume(host);
+ return 0;
}
+#endif
-module_init(pdc2027x_init);
-module_exit(pdc2027x_exit);
+module_pci_driver(pdc2027x_pci_driver);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-20 19:03:41 +0000