1 files changed, 58 insertions, 147 deletions

diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index f4d009ed50a..bcc4b968c04 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -26,15 +26,13 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <scsi/scsi_host.h>
 #include <linux/ata.h>
 #include <linux/libata.h>
 
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 #include <pcmcia/cisreg.h>
@@ -44,16 +42,6 @@
 #define DRV_NAME "pata_pcmcia"
 #define DRV_VERSION "0.3.5"
 
-/*
- *	Private data structure to glue stuff together
- */
-
-struct ata_pcmcia_info {
-	struct pcmcia_device *pdev;
-	int		ndev;
-	dev_node_t	node;
-};
-
 /**
  *	pcmcia_set_mode	-	PCMCIA specific mode setup
  *	@link: link
@@ -79,7 +67,7 @@ static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_d
 		   the same vendor - check serial */
 		if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO,
 			   ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) {
-			ata_dev_printk(slave, KERN_WARNING, "is a ghost device, ignoring.\n");
+			ata_dev_warn(slave, "is a ghost device, ignoring\n");
 			ata_dev_disable(slave);
 		}
 	}
@@ -131,12 +119,12 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
  *	@qc: command
  *
  *	Drain the FIFO and device of any stuck data following a command
- *	failing to complete. In some cases this is neccessary before a
+ *	failing to complete. In some cases this is necessary before a
  *	reset will recover the device.
  *
  */
- 
-void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc)
+
+static void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc)
 {
 	int count;
 	struct ata_port *ap;
@@ -153,8 +141,7 @@ void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc)
 		ioread8(ap->ioaddr.data_addr);
 
 	if (count)
-		ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n",
-								count);
+		ata_port_warn(ap, "drained %d bytes to clear DRQ\n", count);
 
 }
 
@@ -174,68 +161,31 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
 	.sff_data_xfer	= ata_data_xfer_8bit,
 	.cable_detect	= ata_cable_40wire,
 	.set_mode	= pcmcia_set_mode_8bit,
-	.drain_fifo	= pcmcia_8bit_drain_fifo,
+	.sff_drain_fifo	= pcmcia_8bit_drain_fifo,
 };
 
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
-
-struct pcmcia_config_check {
-	unsigned long ctl_base;
-	int skip_vcc;
-	int is_kme;
-};
 
-static int pcmcia_check_one_config(struct pcmcia_device *pdev,
-				   cistpl_cftable_entry_t *cfg,
-				   cistpl_cftable_entry_t *dflt,
-				   unsigned int vcc,
-				   void *priv_data)
+static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
 {
-	struct pcmcia_config_check *stk = priv_data;
-
-	/* Check for matching Vcc, unless we're desperate */
-	if (!stk->skip_vcc) {
-		if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
-			if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
-				return -ENODEV;
-		}
-	}
+	int *is_kme = priv_data;
 
-	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
-		pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
-	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
-		pdev->io.BasePort1 = io->win[0].base;
-		pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
-		if (!(io->flags & CISTPL_IO_16BIT))
-			pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-		if (io->nwin == 2) {
-			pdev->io.NumPorts1 = 8;
-			pdev->io.BasePort2 = io->win[1].base;
-			pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
-			if (pcmcia_request_io(pdev, &pdev->io) != 0)
-				return -ENODEV;
-			stk->ctl_base = pdev->io.BasePort2;
-		} else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
-			pdev->io.NumPorts1 = io->win[0].len;
-			pdev->io.NumPorts2 = 0;
-			if (pcmcia_request_io(pdev, &pdev->io) != 0)
-				return -ENODEV;
-			stk->ctl_base = pdev->io.BasePort1 + 0x0e;
-		} else
+	if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH)
+	    != IO_DATA_PATH_WIDTH_8) {
+		pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+		pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+	}
+	pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+	pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+
+	if (pdev->resource[1]->end) {
+		pdev->resource[0]->end = 8;
+		pdev->resource[1]->end = (*is_kme) ? 2 : 1;
+	} else {
+		if (pdev->resource[0]->end < 16)
 			return -ENODEV;
-		/* If we've got this far, we're done */
-		return 0;
 	}
-	return -ENODEV;
+
+	return pcmcia_request_io(pdev);
 }
 
 /**
@@ -250,30 +200,15 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 {
 	struct ata_host *host;
 	struct ata_port *ap;
-	struct ata_pcmcia_info *info;
-	struct pcmcia_config_check *stk = NULL;
-	int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
+	int is_kme = 0, ret = -ENOMEM, p;
 	unsigned long io_base, ctl_base;
 	void __iomem *io_addr, *ctl_addr;
 	int n_ports = 1;
 	struct ata_port_operations *ops = &pcmcia_port_ops;
 
-	info = kzalloc(sizeof(*info), GFP_KERNEL);
-	if (info == NULL)
-		return -ENOMEM;
-
-	/* Glue stuff together. FIXME: We may be able to get rid of info with care */
-	info->pdev = pdev;
-	pdev->priv = info;
-
 	/* Set up attributes in order to probe card and get resources */
-	pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
-	pdev->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
-	pdev->io.IOAddrLines = 3;
-	pdev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-	pdev->irq.IRQInfo1 = IRQ_LEVEL_ID;
-	pdev->conf.Attributes = CONF_ENABLE_IRQ;
-	pdev->conf.IntType = INT_MEMORY_AND_IO;
+	pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO |
+		CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
 
 	/* See if we have a manufacturer identifier. Use it to set is_kme for
 	   vendor quirks */
@@ -281,23 +216,23 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 		  ((pdev->card_id == PRODID_KME_KXLC005_A) ||
 		   (pdev->card_id == PRODID_KME_KXLC005_B)));
 
-	/* Allocate resoure probing structures */
-
-	stk = kzalloc(sizeof(*stk), GFP_KERNEL);
-	if (!stk)
-		goto out1;
-	stk->is_kme = is_kme;
-	stk->skip_vcc = io_base = ctl_base = 0;
-
-	if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
-		stk->skip_vcc = 1;
-		if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
+	if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme)) {
+		pdev->config_flags &= ~CONF_AUTO_CHECK_VCC;
+		if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme))
 			goto failed; /* No suitable config found */
 	}
-	io_base = pdev->io.BasePort1;
-	ctl_base = stk->ctl_base;
-	CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
-	CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
+	io_base = pdev->resource[0]->start;
+	if (pdev->resource[1]->end)
+		ctl_base = pdev->resource[1]->start;
+	else
+		ctl_base = pdev->resource[0]->start + 0x0e;
+
+	if (!pdev->irq)
+		goto failed;
+
+	ret = pcmcia_enable_device(pdev);
+	if (ret)
+		goto failed;
 
 	/* iomap */
 	ret = -ENOMEM;
@@ -313,7 +248,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 
 	/* FIXME: Could be more ports at base + 0x10 but we only deal with
 	   one right now */
-	if (pdev->io.NumPorts1 >= 0x20)
+	if (resource_size(pdev->resource[0]) >= 0x20)
 		n_ports = 2;
 
 	if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620)
@@ -342,23 +277,16 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 	}
 
 	/* activate */
-	ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
+	ret = ata_host_activate(host, pdev->irq, ata_sff_interrupt,
 				IRQF_SHARED, &pcmcia_sht);
 	if (ret)
 		goto failed;
 
-	info->ndev = 1;
-	kfree(stk);
+	pdev->priv = host;
 	return 0;
 
-cs_failed:
-	cs_error(pdev, last_fn, last_ret);
 failed:
-	kfree(stk);
-	info->ndev = 0;
 	pcmcia_disable_device(pdev);
-out1:
-	kfree(info);
 	return ret;
 }
 
@@ -372,23 +300,15 @@ out1:
 
 static void pcmcia_remove_one(struct pcmcia_device *pdev)
 {
-	struct ata_pcmcia_info *info = pdev->priv;
-	struct device *dev = &pdev->dev;
-
-	if (info != NULL) {
-		/* If we have attached the device to the ATA layer, detach it */
-		if (info->ndev) {
-			struct ata_host *host = dev_get_drvdata(dev);
-			ata_host_detach(host);
-		}
-		info->ndev = 0;
-		pdev->priv = NULL;
-	}
+	struct ata_host *host = pdev->priv;
+
+	if (host)
+		ata_host_detach(host);
+
 	pcmcia_disable_device(pdev);
-	kfree(info);
 }
 
-static struct pcmcia_device_id pcmcia_devices[] = {
+static const struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_FUNC_ID(4),
 	PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000),	/* Corsair */
 	PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000),	/* Hitachi */
@@ -411,6 +331,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
 	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
+	PCMCIA_DEVICE_PROD_ID12("CNF   ", "CD-ROM", 0x46d7db81, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
 	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
@@ -423,6 +344,8 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
+	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
+	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
 	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
@@ -443,6 +366,8 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
+	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
+	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
 	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 	PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
 	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
@@ -456,28 +381,14 @@ MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices);
 
 static struct pcmcia_driver pcmcia_driver = {
 	.owner		= THIS_MODULE,
-	.drv = {
-		.name		= DRV_NAME,
-	},
+	.name		= DRV_NAME,
 	.id_table	= pcmcia_devices,
 	.probe		= pcmcia_init_one,
 	.remove		= pcmcia_remove_one,
 };
-
-static int __init pcmcia_init(void)
-{
-	return pcmcia_register_driver(&pcmcia_driver);
-}
-
-static void __exit pcmcia_exit(void)
-{
-	pcmcia_unregister_driver(&pcmcia_driver);
-}
+module_pcmcia_driver(pcmcia_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for PCMCIA ATA");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
-
-module_init(pcmcia_init);
-module_exit(pcmcia_exit);