aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/pata_legacy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_legacy.c')
-rw-r--r--drivers/ata/pata_legacy.c205
1 files changed, 94 insertions, 111 deletions
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index e3bc1b43628..bce2a8ca467 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -25,6 +25,13 @@
* http://www.ryston.cz/petr/vlb/pdc20230b.html
* http://www.ryston.cz/petr/vlb/pdc20230c.html
* http://www.ryston.cz/petr/vlb/pdc20630.html
+ * QDI65x0:
+ * http://www.ryston.cz/petr/vlb/qd6500.html
+ * http://www.ryston.cz/petr/vlb/qd6580.html
+ *
+ * QDI65x0 probe code based on drivers/ide/legacy/qd65xx.c
+ * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
+ * Samuel Thibault <samuel.thibault@ens-lyon.org>
*
* Unsupported but docs exist:
* Appian/Adaptec AIC25VL01/Cirrus Logic PD7220
@@ -35,7 +42,10 @@
* the MPIIX where the tuning is PCI side but the IDE is "ISA side".
*
* Specific support is included for the ht6560a/ht6560b/opti82c611a/
- * opti82c465mv/promise 20230c/20630/winbond83759A
+ * opti82c465mv/promise 20230c/20630/qdi65x0/winbond83759A
+ *
+ * Support for the Winbond 83759A when operating in advanced mode.
+ * Multichip mode is not currently supported.
*
* Use the autospeed and pio_mask options with:
* Appian ADI/2 aka CLPD7220 or AIC25VL01.
@@ -48,6 +58,7 @@
*
*/
+#include <linux/async.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -68,15 +79,6 @@ static int all;
module_param(all, int, 0444);
MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
-struct legacy_data {
- unsigned long timing;
- u8 clock[2];
- u8 last;
- int fast;
- struct platform_device *platform_dev;
-
-};
-
enum controller {
BIOS = 0,
SNOOP = 1,
@@ -93,6 +95,14 @@ enum controller {
UNKNOWN = -1
};
+struct legacy_data {
+ unsigned long timing;
+ u8 clock[2];
+ u8 last;
+ int fast;
+ enum controller type;
+ struct platform_device *platform_dev;
+};
struct legacy_probe {
unsigned char *name;
@@ -108,6 +118,7 @@ struct legacy_controller {
struct ata_port_operations *ops;
unsigned int pio_mask;
unsigned int flags;
+ unsigned int pflags;
int (*setup)(struct platform_device *, struct legacy_probe *probe,
struct legacy_data *data);
};
@@ -125,13 +136,25 @@ static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */
static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
-static int qdi; /* Set to probe QDI controllers */
-static int winbond; /* Set to probe Winbond controllers,
- give I/O port if non standard */
static int autospeed; /* Chip present which snoops speed changes */
-static int pio_mask = 0x1F; /* PIO range for autospeed devices */
+static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
+/* Set to probe QDI controllers */
+#ifdef CONFIG_PATA_QDI_MODULE
+static int qdi = 1;
+#else
+static int qdi;
+#endif
+
+#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
+static int winbond = 1; /* Set to probe Winbond controllers,
+ give I/O port if non standard */
+#else
+static int winbond; /* Set to probe Winbond controllers,
+ give I/O port if non standard */
+#endif
+
/**
* legacy_probe_add - Add interface to probe list
* @port: Controller port
@@ -195,7 +218,7 @@ static int legacy_set_mode(struct ata_link *link, struct ata_device **unused)
struct ata_device *dev;
ata_for_each_dev(dev, link, ENABLED) {
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ ata_dev_info(dev, "configured for PIO\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
@@ -284,9 +307,11 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw)
{
int slop = buflen & 3;
+ struct ata_port *ap = dev->link->ap;
+
/* 32bit I/O capable *and* we need to write a whole number of dwords */
- if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) {
- struct ata_port *ap = dev->link->ap;
+ if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)
+ && (ap->pflags & ATA_PFLAG_PIO32)) {
unsigned long flags;
local_irq_save(flags);
@@ -376,8 +401,7 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
active = clamp_val(t.active, 2, 15);
- recover = clamp_val(t.recover, 2, 16);
- recover &= 0x15;
+ recover = clamp_val(t.recover, 2, 16) & 0x0F;
inb(0x3E6);
inb(0x3E6);
@@ -518,7 +542,7 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
u8 sysclk;
/* Get the clock */
- sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */
+ sysclk = (opti_syscfg(0xAC) & 0xC0) >> 6; /* BIOS set */
/* Enter configuration mode */
ioread16(ap->ioaddr.error_addr);
@@ -611,40 +635,20 @@ static struct ata_port_operations opti82c46x_port_ops = {
.qc_issue = opti82c46x_qc_issue,
};
-static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct legacy_data *ld_qdi = ap->host->private_data;
- int active, recovery;
- u8 timing;
-
- /* Get the timing data in cycles */
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
- if (ld_qdi->fast) {
- active = 8 - clamp_val(t.active, 1, 8);
- recovery = 18 - clamp_val(t.recover, 3, 18);
- } else {
- active = 9 - clamp_val(t.active, 2, 9);
- recovery = 15 - clamp_val(t.recover, 0, 15);
- }
- timing = (recovery << 4) | active | 0x08;
-
- ld_qdi->clock[adev->devno] = timing;
-
- outb(timing, ld_qdi->timing);
-}
-
/**
- * qdi6580dp_set_piomode - PIO setup for dual channel
+ * qdi65x0_set_piomode - PIO setup for QDI65x0
* @ap: Port
* @adev: Device
*
+ * In single channel mode the 6580 has one clock per device and we can
+ * avoid the requirement to clock switch. We also have to load the timing
+ * into the right clock according to whether we are master or slave.
+ *
* In dual channel mode the 6580 has one clock per channel and we have
* to software clockswitch in qc_issue.
*/
-static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void qdi65x0_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct ata_timing t;
struct legacy_data *ld_qdi = ap->host->private_data;
@@ -662,48 +666,16 @@ static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
-
ld_qdi->clock[adev->devno] = timing;
- outb(timing, ld_qdi->timing + 2 * ap->port_no);
- /* Clear the FIFO */
- if (adev->class != ATA_DEV_ATA)
- outb(0x5F, ld_qdi->timing + 3);
-}
-
-/**
- * qdi6580_set_piomode - PIO setup for single channel
- * @ap: Port
- * @adev: Device
- *
- * In single channel mode the 6580 has one clock per device and we can
- * avoid the requirement to clock switch. We also have to load the timing
- * into the right clock according to whether we are master or slave.
- */
-
-static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct legacy_data *ld_qdi = ap->host->private_data;
- int active, recovery;
- u8 timing;
-
- /* Get the timing data in cycles */
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+ if (ld_qdi->type == QDI6580)
+ outb(timing, ld_qdi->timing + 2 * adev->devno);
+ else
+ outb(timing, ld_qdi->timing + 2 * ap->port_no);
- if (ld_qdi->fast) {
- active = 8 - clamp_val(t.active, 1, 8);
- recovery = 18 - clamp_val(t.recover, 3, 18);
- } else {
- active = 9 - clamp_val(t.active, 2, 9);
- recovery = 15 - clamp_val(t.recover, 0, 15);
- }
- timing = (recovery << 4) | active | 0x08;
- ld_qdi->clock[adev->devno] = timing;
- outb(timing, ld_qdi->timing + 2 * adev->devno);
/* Clear the FIFO */
- if (adev->class != ATA_DEV_ATA)
- outb(0x5F, ld_qdi->timing + 3);
+ if (ld_qdi->type != QDI6500 && adev->class != ATA_DEV_ATA)
+ outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
}
/**
@@ -736,7 +708,8 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
struct ata_port *ap = adev->link->ap;
int slop = buflen & 3;
- if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) {
+ if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)
+ && (ap->pflags & ATA_PFLAG_PIO32)) {
if (rw == WRITE)
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
else
@@ -768,20 +741,21 @@ static int qdi_port(struct platform_device *dev,
static struct ata_port_operations qdi6500_port_ops = {
.inherits = &legacy_base_port_ops,
- .set_piomode = qdi6500_set_piomode,
+ .set_piomode = qdi65x0_set_piomode,
.qc_issue = qdi_qc_issue,
.sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580_port_ops = {
.inherits = &legacy_base_port_ops,
- .set_piomode = qdi6580_set_piomode,
+ .set_piomode = qdi65x0_set_piomode,
.sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580dp_port_ops = {
.inherits = &legacy_base_port_ops,
- .set_piomode = qdi6580dp_set_piomode,
+ .set_piomode = qdi65x0_set_piomode,
+ .qc_issue = qdi_qc_issue,
.sff_data_xfer = vlb32_data_xfer,
};
@@ -857,28 +831,31 @@ static struct ata_port_operations winbond_port_ops = {
};
static struct legacy_controller controllers[] = {
- {"BIOS", &legacy_port_ops, 0x1F,
- ATA_FLAG_NO_IORDY, NULL },
- {"Snooping", &simple_port_ops, 0x1F,
- 0 , NULL },
- {"PDC20230", &pdc20230_port_ops, 0x7,
- ATA_FLAG_NO_IORDY, NULL },
- {"HT6560A", &ht6560a_port_ops, 0x07,
- ATA_FLAG_NO_IORDY, NULL },
- {"HT6560B", &ht6560b_port_ops, 0x1F,
- ATA_FLAG_NO_IORDY, NULL },
- {"OPTI82C611A", &opti82c611a_port_ops, 0x0F,
- 0 , NULL },
- {"OPTI82C46X", &opti82c46x_port_ops, 0x0F,
- 0 , NULL },
- {"QDI6500", &qdi6500_port_ops, 0x07,
- ATA_FLAG_NO_IORDY, qdi_port },
- {"QDI6580", &qdi6580_port_ops, 0x1F,
- 0 , qdi_port },
- {"QDI6580DP", &qdi6580dp_port_ops, 0x1F,
- 0 , qdi_port },
- {"W83759A", &winbond_port_ops, 0x1F,
- 0 , winbond_port }
+ {"BIOS", &legacy_port_ops, ATA_PIO4,
+ ATA_FLAG_NO_IORDY, 0, NULL },
+ {"Snooping", &simple_port_ops, ATA_PIO4,
+ 0, 0, NULL },
+ {"PDC20230", &pdc20230_port_ops, ATA_PIO2,
+ ATA_FLAG_NO_IORDY,
+ ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL },
+ {"HT6560A", &ht6560a_port_ops, ATA_PIO2,
+ ATA_FLAG_NO_IORDY, 0, NULL },
+ {"HT6560B", &ht6560b_port_ops, ATA_PIO4,
+ ATA_FLAG_NO_IORDY, 0, NULL },
+ {"OPTI82C611A", &opti82c611a_port_ops, ATA_PIO3,
+ 0, 0, NULL },
+ {"OPTI82C46X", &opti82c46x_port_ops, ATA_PIO3,
+ 0, 0, NULL },
+ {"QDI6500", &qdi6500_port_ops, ATA_PIO2,
+ ATA_FLAG_NO_IORDY,
+ ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
+ {"QDI6580", &qdi6580_port_ops, ATA_PIO4,
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
+ {"QDI6580DP", &qdi6580dp_port_ops, ATA_PIO4,
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
+ {"W83759A", &winbond_port_ops, ATA_PIO4,
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,
+ winbond_port }
};
/**
@@ -939,7 +916,6 @@ static __init int probe_chip_type(struct legacy_probe *probe)
local_irq_restore(flags);
return BIOS;
}
- local_irq_restore(flags);
}
if (ht6560a & mask)
@@ -997,6 +973,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1);
if (!io_addr || !ctrl_addr)
goto fail;
+ ld->type = probe->type;
if (controller->setup)
if (controller->setup(pdev, probe, ld) < 0)
goto fail;
@@ -1008,6 +985,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
ap->ops = ops;
ap->pio_mask = pio_modes;
ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
+ ap->pflags |= controller->pflags;
ap->ioaddr.cmd_addr = io_addr;
ap->ioaddr.altstatus_addr = ctrl_addr;
ap->ioaddr.ctl_addr = ctrl_addr;
@@ -1020,6 +998,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
&legacy_sht);
if (ret)
goto fail;
+ async_synchronize_full();
ld->platform_dev = pdev;
/* Nothing found means we drop the port as its probably not there */
@@ -1032,6 +1011,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
return 0;
}
}
+ ata_host_detach(host);
fail:
platform_device_unregister(pdev);
return ret;
@@ -1278,6 +1258,8 @@ MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for legacy ATA");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("pata_qdi");
+MODULE_ALIAS("pata_winbond");
module_param(probe_all, int, 0);
module_param(autospeed, int, 0);
@@ -1286,6 +1268,7 @@ module_param(ht6560b, int, 0);
module_param(opti82c611a, int, 0);
module_param(opti82c46x, int, 0);
module_param(qdi, int, 0);
+module_param(winbond, int, 0);
module_param(pio_mask, int, 0);
module_param(iordy_mask, int, 0);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-06 18:11:32 +0000