diff options
Diffstat (limited to 'drivers/ata/pata_it8213.c')
| -rw-r--r-- | drivers/ata/pata_it8213.c | 72 |
1 files changed, 28 insertions, 44 deletions
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index c113d7c079c..4f97d1e52f8 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -10,7 +10,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/device.h> @@ -22,7 +21,7 @@ #define DRV_VERSION "0.0.3" /** - * it8213_pre_reset - check for 40/80 pin + * it8213_pre_reset - probe begin * @link: link * @deadline: deadline jiffies for the operation * @@ -76,8 +75,8 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev) { unsigned int pio = adev->pio_mode - XFER_PIO_0; struct pci_dev *dev = to_pci_dev(ap->host->dev); - unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; - u16 idetm_data; + unsigned int master_port = ap->port_no ? 0x42 : 0x40; + u16 master_data; int control = 0; /* @@ -92,38 +91,37 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev) { 2, 1 }, { 2, 3 }, }; - if (pio > 2) - control |= 1; /* TIME1 enable */ + if (pio > 1) + control |= 1; /* TIME */ if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */ - control |= 2; /* IORDY enable */ + control |= 2; /* IE */ /* Bit 2 is set for ATAPI on the IT8213 - reverse of ICH/PIIX */ if (adev->class != ATA_DEV_ATA) - control |= 4; - - pci_read_config_word(dev, idetm_port, &idetm_data); + control |= 4; /* PPE */ - /* Enable PPE, IE and TIME as appropriate */ + pci_read_config_word(dev, master_port, &master_data); + /* Set PPE, IE, and TIME as appropriate */ if (adev->devno == 0) { - idetm_data &= 0xCCF0; - idetm_data |= control; - idetm_data |= (timings[pio][0] << 12) | + master_data &= 0xCCF0; + master_data |= control; + master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8); } else { u8 slave_data; - idetm_data &= 0xCC0F; - idetm_data |= (control << 4); + master_data &= 0xFF0F; + master_data |= (control << 4); /* Slave timing in separate register */ pci_read_config_byte(dev, 0x44, &slave_data); slave_data &= 0xF0; - slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << 4; + slave_data |= (timings[pio][0] << 2) | timings[pio][1]; pci_write_config_byte(dev, 0x44, slave_data); } - idetm_data |= 0x4000; /* Ensure SITRE is enabled */ - pci_write_config_word(dev, idetm_port, idetm_data); + master_data |= 0x4000; /* Ensure SITRE is set */ + pci_write_config_word(dev, master_port, master_data); } /** @@ -164,7 +162,7 @@ static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev) /* Clocks follow the PIIX style */ u_speed = min(2 - (udma & 1), udma); - if (udma == 5) + if (udma > 4) u_clock = 0x1000; /* 100Mhz */ else if (udma > 2) u_clock = 1; /* 66Mhz */ @@ -173,10 +171,10 @@ static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev) udma_enable |= (1 << devid); - /* Load the UDMA mode number */ + /* Load the UDMA cycle time */ pci_read_config_word(dev, 0x4A, &udma_timing); udma_timing &= ~(3 << (4 * devid)); - udma_timing |= (udma & 3) << (4 * devid); + udma_timing |= u_speed << (4 * devid); pci_write_config_word(dev, 0x4A, udma_timing); /* Load the clock selection */ @@ -211,7 +209,7 @@ static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev) master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ master_data |= control << 4; pci_read_config_byte(dev, 0x44, &slave_data); - slave_data &= (0x0F + 0xE1 * ap->port_no); + slave_data &= 0xF0; /* Load the matching timing */ slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); pci_write_config_byte(dev, 0x44, slave_data); @@ -259,22 +257,19 @@ static struct ata_port_operations it8213_ops = { static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { - static int printed_version; static const struct ata_port_info info = { .flags = ATA_FLAG_SLAVE_POSS, - .pio_mask = 0x1f, /* pio0-4 */ - .mwdma_mask = 0x07, /* mwdma0-2 */ - .udma_mask = ATA_UDMA4, /* FIXME: want UDMA 100? */ + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA12_ONLY, + .udma_mask = ATA_UDMA6, .port_ops = &it8213_ops, }; /* Current IT8213 stuff is single port */ const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; - if (!printed_version++) - dev_printk(KERN_DEBUG, &pdev->dev, - "version " DRV_VERSION "\n"); + ata_print_version_once(&pdev->dev, DRV_VERSION); - return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL); + return ata_pci_bmdma_init_one(pdev, ppi, &it8213_sht, NULL, 0); } static const struct pci_device_id it8213_pci_tbl[] = { @@ -288,24 +283,13 @@ static struct pci_driver it8213_pci_driver = { .id_table = it8213_pci_tbl, .probe = it8213_init_one, .remove = ata_pci_remove_one, -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .suspend = ata_pci_device_suspend, .resume = ata_pci_device_resume, #endif }; -static int __init it8213_init(void) -{ - return pci_register_driver(&it8213_pci_driver); -} - -static void __exit it8213_exit(void) -{ - pci_unregister_driver(&it8213_pci_driver); -} - -module_init(it8213_init); -module_exit(it8213_exit); +module_pci_driver(it8213_pci_driver); MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("SCSI low-level driver for the ITE 8213"); |