diff options
Diffstat (limited to 'drivers/ata/pata_isapnp.c')
| -rw-r--r-- | drivers/ata/pata_isapnp.c | 75 |
1 files changed, 28 insertions, 47 deletions
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index d042efdfbac..b33d1f99b3a 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -1,7 +1,7 @@ /* * pata-isapnp.c - ISA PnP PATA controller driver. - * Copyright 2005/2006 Red Hat Inc <alan@redhat.com>, all rights reserved. + * Copyright 2005/2006 Red Hat Inc, all rights reserved. * * Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru> */ @@ -17,50 +17,22 @@ #include <linux/libata.h> #define DRV_NAME "pata_isapnp" -#define DRV_VERSION "0.2.0" +#define DRV_VERSION "0.2.5" static struct scsi_host_template isapnp_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, + ATA_PIO_SHT(DRV_NAME), }; static struct ata_port_operations isapnp_port_ops = { - .port_disable = ata_port_disable, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, + .inherits = &ata_sff_port_ops, .cable_detect = ata_cable_40wire, +}; - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - - .port_start = ata_port_start, +static struct ata_port_operations isapnp_noalt_port_ops = { + .inherits = &ata_sff_port_ops, + .cable_detect = ata_cable_40wire, + /* No altstatus so we don't want to use the lost interrupt poll */ + .lost_interrupt = ATA_OP_NULL, }; /** @@ -77,14 +49,16 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev struct ata_host *host; struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; - int rc; + int irq = 0; + irq_handler_t handler = NULL; if (pnp_port_valid(idev, 0) == 0) return -ENODEV; - /* FIXME: Should selected polled PIO here not fail */ - if (pnp_irq_valid(idev, 0) == 0) - return -ENODEV; + if (pnp_irq_valid(idev, 0)) { + irq = pnp_irq(idev, 0); + handler = ata_sff_interrupt; + } /* allocate host */ host = ata_host_alloc(&idev->dev, 1); @@ -98,23 +72,28 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev ap = host->ports[0]; - ap->ops = &isapnp_port_ops; - ap->pio_mask = 1; + ap->ops = &isapnp_noalt_port_ops; + ap->pio_mask = ATA_PIO0; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; - if (pnp_port_valid(idev, 1) == 0) { + if (pnp_port_valid(idev, 1)) { ctl_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 1), 1); ap->ioaddr.altstatus_addr = ctl_addr; ap->ioaddr.ctl_addr = ctl_addr; + ap->ops = &isapnp_port_ops; } - ata_std_ports(&ap->ioaddr); + ata_sff_std_ports(&ap->ioaddr); + + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pnp_port_start(idev, 0), + (unsigned long long)pnp_port_start(idev, 1)); /* activate */ - return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0, + return ata_host_activate(host, irq, handler, 0, &isapnp_sht); } @@ -140,6 +119,8 @@ static struct pnp_device_id isapnp_devices[] = { {.id = ""} }; +MODULE_DEVICE_TABLE(pnp, isapnp_devices); + static struct pnp_driver isapnp_driver = { .name = DRV_NAME, .id_table = isapnp_devices, |