aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/pata_hpt37x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_hpt37x.c')
-rw-r--r--drivers/ata/pata_hpt37x.c127
1 files changed, 56 insertions, 71 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index efdd18bc866..3ba843f5cdc 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -14,17 +14,18 @@
* Look into engine reset on timeout errors. Should not be required.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.18"
+#define DRV_VERSION "0.6.23"
struct hpt_clock {
u8 xfer_speed;
@@ -229,7 +230,7 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
while (list[i] != NULL) {
if (!strcmp(list[i], model_num)) {
- printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n",
+ pr_warn("%s is not supported for %s\n",
modestr, list[i]);
return 1;
}
@@ -642,7 +643,6 @@ static struct ata_port_operations hpt372_port_ops = {
static struct ata_port_operations hpt374_fn1_port_ops = {
.inherits = &hpt372_port_ops,
.cable_detect = hpt374_fn1_cable_detect,
- .prereset = hpt37x_pre_reset,
};
/**
@@ -803,7 +803,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA6,
.port_ops = &hpt302_port_ops
};
- /* HPT374 - UDMA100, function 1 uses different prereset method */
+ /* HPT374 - UDMA100, function 1 uses different cable_detect method */
static const struct ata_port_info info_hpt374_fn0 = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
@@ -838,7 +838,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (rc)
return rc;
- if (dev->device == PCI_DEVICE_ID_TTI_HPT366) {
+ switch (dev->device) {
+ case PCI_DEVICE_ID_TTI_HPT366:
/* May be a later chip in disguise. Check */
/* Older chips are in the HPT366 driver. Ignore them */
if (rev < 3)
@@ -863,54 +864,49 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
chip_table = &hpt372;
break;
default:
- printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, "
- "please report (%d).\n", rev);
+ pr_err("Unknown HPT366 subtype, please report (%d)\n",
+ rev);
return -ENODEV;
}
- } else {
- switch (dev->device) {
- case PCI_DEVICE_ID_TTI_HPT372:
- /* 372N if rev >= 2 */
- if (rev >= 2)
- return -ENODEV;
- ppi[0] = &info_hpt372;
- chip_table = &hpt372a;
- break;
- case PCI_DEVICE_ID_TTI_HPT302:
- /* 302N if rev > 1 */
- if (rev > 1)
- return -ENODEV;
- ppi[0] = &info_hpt302;
- /* Check this */
- chip_table = &hpt302;
- break;
- case PCI_DEVICE_ID_TTI_HPT371:
- if (rev > 1)
- return -ENODEV;
- ppi[0] = &info_hpt302;
- chip_table = &hpt371;
- /*
- * Single channel device, master is not present
- * but the BIOS (or us for non x86) must mark it
- * absent
- */
- pci_read_config_byte(dev, 0x50, &mcr1);
- mcr1 &= ~0x04;
- pci_write_config_byte(dev, 0x50, mcr1);
- break;
- case PCI_DEVICE_ID_TTI_HPT374:
- chip_table = &hpt374;
- if (!(PCI_FUNC(dev->devfn) & 1))
- *ppi = &info_hpt374_fn0;
- else
- *ppi = &info_hpt374_fn1;
- break;
- default:
- printk(KERN_ERR
- "pata_hpt37x: PCI table is bogus, please report (%d).\n",
- dev->device);
- return -ENODEV;
- }
+ break;
+ case PCI_DEVICE_ID_TTI_HPT372:
+ /* 372N if rev >= 2 */
+ if (rev >= 2)
+ return -ENODEV;
+ ppi[0] = &info_hpt372;
+ chip_table = &hpt372a;
+ break;
+ case PCI_DEVICE_ID_TTI_HPT302:
+ /* 302N if rev > 1 */
+ if (rev > 1)
+ return -ENODEV;
+ ppi[0] = &info_hpt302;
+ /* Check this */
+ chip_table = &hpt302;
+ break;
+ case PCI_DEVICE_ID_TTI_HPT371:
+ if (rev > 1)
+ return -ENODEV;
+ ppi[0] = &info_hpt302;
+ chip_table = &hpt371;
+ /*
+ * Single channel device, master is not present but the BIOS
+ * (or us for non x86) must mark it absent
+ */
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ mcr1 &= ~0x04;
+ pci_write_config_byte(dev, 0x50, mcr1);
+ break;
+ case PCI_DEVICE_ID_TTI_HPT374:
+ chip_table = &hpt374;
+ if (!(PCI_FUNC(dev->devfn) & 1))
+ *ppi = &info_hpt374_fn0;
+ else
+ *ppi = &info_hpt374_fn1;
+ break;
+ default:
+ pr_err("PCI table is bogus, please report (%d)\n", dev->device);
+ return -ENODEV;
}
/* Ok so this is a chip we support */
@@ -957,8 +953,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
u8 sr;
u32 total = 0;
- printk(KERN_WARNING
- "pata_hpt37x: BIOS has not set timing clocks.\n");
+ pr_warn("BIOS has not set timing clocks\n");
/* This is the process the HPT371 BIOS is reported to use */
for (i = 0; i < 128; i++) {
@@ -1014,7 +1009,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
(f_high << 16) | f_low | 0x100);
}
if (adjust == 8) {
- printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n");
+ pr_err("DPLL did not stabilize!\n");
return -ENODEV;
}
if (dpll == 3)
@@ -1022,8 +1017,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
else
private_data = (void *)hpt37x_timings_50;
- printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n",
- MHz[clock_slot], MHz[dpll]);
+ pr_info("bus clock %dMHz, using %dMHz DPLL\n",
+ MHz[clock_slot], MHz[dpll]);
} else {
private_data = (void *)chip_table->clocks[clock_slot];
/*
@@ -1036,8 +1031,9 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
ppi[0] = &info_hpt370_33;
if (clock_slot < 2 && ppi[0] == &info_hpt370a)
ppi[0] = &info_hpt370a_33;
- printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
- chip_table->name, MHz[clock_slot]);
+
+ pr_info("%s using %dMHz bus clock\n",
+ chip_table->name, MHz[clock_slot]);
}
/* Now kick off ATA set up */
@@ -1061,21 +1057,10 @@ static struct pci_driver hpt37x_pci_driver = {
.remove = ata_pci_remove_one
};
-static int __init hpt37x_init(void)
-{
- return pci_register_driver(&hpt37x_pci_driver);
-}
-
-static void __exit hpt37x_exit(void)
-{
- pci_unregister_driver(&hpt37x_pci_driver);
-}
+module_pci_driver(hpt37x_pci_driver);
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for the Highpoint HPT37x/30x");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, hpt37x);
MODULE_VERSION(DRV_VERSION);
-
-module_init(hpt37x_init);
-module_exit(hpt37x_exit);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-22 13:17:05 +0000