diff options
Diffstat (limited to 'drivers/ata/pata_cs5520.c')
| -rw-r--r-- | drivers/ata/pata_cs5520.c | 75 |
1 files changed, 12 insertions, 63 deletions
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 0df83cf7423..d65cb9d2fa8 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -29,12 +29,11 @@ * General Public License for more details. * * Documentation: - * Not publically available. + * Not publicly available. */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> -#include <linux/init.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <scsi/scsi_host.h> @@ -90,48 +89,12 @@ static void cs5520_set_timings(struct ata_port *ap, struct ata_device *adev, int } /** - * cs5520_enable_dma - turn on DMA bits - * - * Turn on the DMA bits for this disk. Needed because the BIOS probably - * has not done the work for us. Belongs in the core SATA code. - */ - -static void cs5520_enable_dma(struct ata_port *ap, struct ata_device *adev) -{ - /* Set the DMA enable/disable flag */ - u8 reg = ioread8(ap->ioaddr.bmdma_addr + 0x02); - reg |= 1<<(adev->devno + 5); - iowrite8(reg, ap->ioaddr.bmdma_addr + 0x02); -} - -/** - * cs5520_set_dmamode - program DMA timings - * @ap: ATA port - * @adev: ATA device - * - * Program the DMA mode timings for the controller according to the pio - * clocking table. Note that this device sets the DMA timings to PIO - * mode values. This may seem bizarre but the 5520 architecture talks - * PIO mode to the disk and DMA mode to the controller so the underlying - * transfers are PIO timed. - */ - -static void cs5520_set_dmamode(struct ata_port *ap, struct ata_device *adev) -{ - static const int dma_xlate[3] = { XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 }; - cs5520_set_timings(ap, adev, dma_xlate[adev->dma_mode]); - cs5520_enable_dma(ap, adev); -} - -/** * cs5520_set_piomode - program PIO timings * @ap: ATA port * @adev: ATA device * * Program the PIO mode timings for the controller according to the pio - * clocking table. We know pio_mode will equal dma_mode because of the - * CS5520 architecture. At least once we turned DMA on and wrote a - * mode setter. + * clocking table. */ static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev) @@ -146,13 +109,12 @@ static struct scsi_host_template cs5520_sht = { static struct ata_port_operations cs5520_port_ops = { .inherits = &ata_bmdma_port_ops, - .qc_prep = ata_sff_dumb_qc_prep, + .qc_prep = ata_bmdma_dumb_qc_prep, .cable_detect = ata_cable_40wire, .set_piomode = cs5520_set_piomode, - .set_dmamode = cs5520_set_dmamode, }; -static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +static int cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const unsigned int cmd_port[] = { 0x1F0, 0x170 }; static const unsigned int ctl_port[] = { 0x3F6, 0x376 }; @@ -186,8 +148,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi ppi[1] = π if ((pcicfg & 0x40) == 0) { - dev_printk(KERN_WARNING, &pdev->dev, - "DMA mode disabled. Enabling.\n"); + dev_warn(&pdev->dev, "DMA mode disabled. Enabling.\n"); pci_write_config_byte(pdev, 0x60, pcicfg | 0x40); } @@ -258,7 +219,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi continue; rc = devm_request_irq(&pdev->dev, irq[ap->port_no], - ata_sff_interrupt, 0, DRV_NAME, host); + ata_bmdma_interrupt, 0, DRV_NAME, host); if (rc) return rc; @@ -268,7 +229,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi return ata_host_register(host, &cs5520_sht); } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP /** * cs5520_reinit_one - device resume * @pdev: PCI device @@ -279,7 +240,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi static int cs5520_reinit_one(struct pci_dev *pdev) { - struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ata_host *host = pci_get_drvdata(pdev); u8 pcicfg; int rc; @@ -307,7 +268,7 @@ static int cs5520_reinit_one(struct pci_dev *pdev) static int cs5520_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { - struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ata_host *host = pci_get_drvdata(pdev); int rc = 0; rc = ata_host_suspend(host, mesg); @@ -317,7 +278,7 @@ static int cs5520_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) pci_save_state(pdev); return 0; } -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ /* For now keep DMA off. We can set it for all but A rev CS5510 once the core ATA code can handle it */ @@ -334,28 +295,16 @@ static struct pci_driver cs5520_pci_driver = { .id_table = pata_cs5520, .probe = cs5520_init_one, .remove = ata_pci_remove_one, -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP .suspend = cs5520_pci_device_suspend, .resume = cs5520_reinit_one, #endif }; -static int __init cs5520_init(void) -{ - return pci_register_driver(&cs5520_pci_driver); -} - -static void __exit cs5520_exit(void) -{ - pci_unregister_driver(&cs5520_pci_driver); -} +module_pci_driver(cs5520_pci_driver); MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for Cyrix CS5510/5520"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, pata_cs5520); MODULE_VERSION(DRV_VERSION); - -module_init(cs5520_init); -module_exit(cs5520_exit); - |