aboutsummaryrefslogtreecommitdiff
path: root/drivers/ata/pata_atiixp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_atiixp.c')
-rw-r--r--drivers/ata/pata_atiixp.c102
1 files changed, 67 insertions, 35 deletions
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index bec0b8ade66..970f7767e5f 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -1,6 +1,7 @@
/*
* pata_atiixp.c - ATI PATA for new ATA layer
* (C) 2005 Red Hat Inc
+ * (C) 2009-2010 Bartlomiej Zolnierkiewicz
*
* Based on
*
@@ -14,11 +15,11 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
+#include <linux/dmi.h>
#define DRV_NAME "pata_atiixp"
#define DRV_VERSION "0.4.6"
@@ -32,11 +33,26 @@ enum {
ATIIXP_IDE_UDMA_MODE = 0x56
};
+static const struct dmi_system_id attixp_cable_override_dmi_table[] = {
+ {
+ /* Board has onboard PATA<->SATA converters */
+ .ident = "MSI E350DM-E33",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "MSI"),
+ DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"),
+ },
+ },
+ { }
+};
+
static int atiixp_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u8 udma;
+ if (dmi_check_system(attixp_cable_override_dmi_table))
+ return ATA_CBL_PATA40_SHORT;
+
/* Hack from drivers/ide/pci. Really we want to know how to do the
raw detection not play follow the bios mode guess */
pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
@@ -45,6 +61,33 @@ static int atiixp_cable_detect(struct ata_port *ap)
return ATA_CBL_PATA40;
}
+static DEFINE_SPINLOCK(atiixp_lock);
+
+/**
+ * atiixp_prereset - perform reset handling
+ * @link: ATA link
+ * @deadline: deadline jiffies for the operation
+ *
+ * Reset sequence checking enable bits to see which ports are
+ * active.
+ */
+
+static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
+{
+ static const struct pci_bits atiixp_enable_bits[] = {
+ { 0x48, 1, 0x01, 0x00 },
+ { 0x48, 1, 0x08, 0x00 }
+ };
+
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
+ return -ENOENT;
+
+ return ata_sff_prereset(link, deadline);
+}
+
/**
* atiixp_set_pio_timing - set initial PIO mode data
* @ap: ATA interface
@@ -61,20 +104,19 @@ static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev,
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int dn = 2 * ap->port_no + adev->devno;
-
- /* Check this is correct - the order is odd in both drivers */
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
- u16 pio_mode_data, pio_timing_data;
+ u32 pio_timing_data;
+ u16 pio_mode_data;
pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
pio_mode_data &= ~(0x7 << (4 * dn));
pio_mode_data |= pio << (4 * dn);
pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
- pci_read_config_word(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
+ pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
pio_timing_data &= ~(0xFF << timing_shift);
pio_timing_data |= (pio_timings[pio] << timing_shift);
- pci_write_config_word(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
+ pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
}
/**
@@ -88,7 +130,10 @@ static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev,
static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
+ unsigned long flags;
+ spin_lock_irqsave(&atiixp_lock, flags);
atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
+ spin_unlock_irqrestore(&atiixp_lock, flags);
}
/**
@@ -108,6 +153,9 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
int dma = adev->dma_mode;
int dn = 2 * ap->port_no + adev->devno;
int wanted_pio;
+ unsigned long flags;
+
+ spin_lock_irqsave(&atiixp_lock, flags);
if (adev->dma_mode >= XFER_UDMA_0) {
u16 udma_mode_data;
@@ -119,16 +167,17 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
udma_mode_data |= dma << (4 * dn);
pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
} else {
- u16 mwdma_timing_data;
- /* Check this is correct - the order is odd in both drivers */
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
+ u32 mwdma_timing_data;
dma -= XFER_MW_DMA_0;
- pci_read_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, &mwdma_timing_data);
+ pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+ &mwdma_timing_data);
mwdma_timing_data &= ~(0xFF << timing_shift);
mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
- pci_write_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, mwdma_timing_data);
+ pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+ mwdma_timing_data);
}
/*
* We must now look at the PIO mode situation. We may need to
@@ -144,6 +193,7 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
if (adev->pio_mode != wanted_pio)
atiixp_set_pio_timing(ap, adev, wanted_pio);
+ spin_unlock_irqrestore(&atiixp_lock, flags);
}
/**
@@ -207,10 +257,11 @@ static struct scsi_host_template atiixp_sht = {
static struct ata_port_operations atiixp_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .qc_prep = ata_sff_dumb_qc_prep,
+ .qc_prep = ata_bmdma_dumb_qc_prep,
.bmdma_start = atiixp_bmdma_start,
.bmdma_stop = atiixp_bmdma_stop,
+ .prereset = atiixp_prereset,
.cable_detect = atiixp_cable_detect,
.set_piomode = atiixp_set_piomode,
.set_dmamode = atiixp_set_dmamode,
@@ -225,18 +276,10 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA5,
.port_ops = &atiixp_port_ops
};
- static const struct pci_bits atiixp_enable_bits[] = {
- { 0x48, 1, 0x01, 0x00 },
- { 0x48, 1, 0x08, 0x00 }
- };
const struct ata_port_info *ppi[] = { &info, &info };
- int i;
- for (i = 0; i < 2; i++)
- if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
- ppi[i] = &ata_dummy_port_info;
-
- return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL);
+ return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
+ ATA_HOST_PARALLEL_SCAN);
}
static const struct pci_device_id atiixp[] = {
@@ -245,6 +288,7 @@ static const struct pci_device_id atiixp[] = {
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), },
{ },
};
@@ -254,28 +298,16 @@ static struct pci_driver atiixp_pci_driver = {
.id_table = atiixp,
.probe = atiixp_init_one,
.remove = ata_pci_remove_one,
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.resume = ata_pci_device_resume,
.suspend = ata_pci_device_suspend,
#endif
};
-static int __init atiixp_init(void)
-{
- return pci_register_driver(&atiixp_pci_driver);
-}
-
-
-static void __exit atiixp_exit(void)
-{
- pci_unregister_driver(&atiixp_pci_driver);
-}
+module_pci_driver(atiixp_pci_driver);
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, atiixp);
MODULE_VERSION(DRV_VERSION);
-
-module_init(atiixp_init);
-module_exit(atiixp_exit);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-06 00:16:03 +0000