diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
| -rw-r--r-- | drivers/ata/libata-core.c | 32 |
1 files changed, 27 insertions, 5 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ac3d1204ea3..dc362fa01ca 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1850,8 +1850,11 @@ int ata_bus_probe(struct ata_port *ap) for (i = 0; i < ATA_MAX_DEVICES; i++) ap->device[i].pio_mode = XFER_PIO_0; - /* read IDENTIFY page and configure devices */ - for (i = 0; i < ATA_MAX_DEVICES; i++) { + /* read IDENTIFY page and configure devices. We have to do the identify + specific sequence bass-ackwards so that PDIAG- is released by + the slave device */ + + for (i = ATA_MAX_DEVICES - 1; i >= 0; i--) { dev = &ap->device[i]; if (tries[i]) @@ -1864,6 +1867,15 @@ int ata_bus_probe(struct ata_port *ap) dev->id); if (rc) goto fail; + } + + /* After the identify sequence we can now set up the devices. We do + this in the normal order so that the user doesn't get confused */ + + for(i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + if (!ata_dev_enabled(dev)) + continue; ap->eh_context.i.flags |= ATA_EHI_PRINTINFO; rc = ata_dev_configure(dev); @@ -2556,12 +2568,11 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) * host channels are not permitted to do so. */ if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX)) - ap->host->simplex_claimed = 1; + ap->host->simplex_claimed = ap; /* step5: chip specific finalisation */ if (ap->ops->post_set_mode) ap->ops->post_set_mode(ap); - out: if (rc) *r_failed_dev = dev; @@ -3444,7 +3455,7 @@ static void ata_dev_xfermask(struct ata_device *dev) "device is on DMA blacklist, disabling DMA\n"); } - if ((host->flags & ATA_HOST_SIMPLEX) && host->simplex_claimed) { + if ((host->flags & ATA_HOST_SIMPLEX) && host->simplex_claimed != ap) { xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by " "other device, disabling DMA\n"); @@ -5343,6 +5354,7 @@ int ata_flush_cache(struct ata_device *dev) return 0; } +#ifdef CONFIG_PM static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg, unsigned int action, unsigned int ehi_flags, int wait) @@ -5458,6 +5470,7 @@ void ata_host_resume(struct ata_host *host) ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0); host->dev->power.power_state = PMSG_ON; } +#endif /** * ata_port_start - Set port up for dma. @@ -6093,6 +6106,7 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) return (tmp == bits->val) ? 1 : 0; } +#ifdef CONFIG_PM void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg) { pci_save_state(pdev); @@ -6144,6 +6158,8 @@ int ata_pci_device_resume(struct pci_dev *pdev) ata_host_resume(host); return rc; } +#endif /* CONFIG_PM */ + #endif /* CONFIG_PCI */ @@ -6352,8 +6368,10 @@ EXPORT_SYMBOL_GPL(sata_scr_write); EXPORT_SYMBOL_GPL(sata_scr_write_flush); EXPORT_SYMBOL_GPL(ata_port_online); EXPORT_SYMBOL_GPL(ata_port_offline); +#ifdef CONFIG_PM EXPORT_SYMBOL_GPL(ata_host_suspend); EXPORT_SYMBOL_GPL(ata_host_resume); +#endif /* CONFIG_PM */ EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_id_to_dma_mode); @@ -6369,16 +6387,20 @@ EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); +#ifdef CONFIG_PM EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend); EXPORT_SYMBOL_GPL(ata_pci_device_do_resume); EXPORT_SYMBOL_GPL(ata_pci_device_suspend); EXPORT_SYMBOL_GPL(ata_pci_device_resume); +#endif /* CONFIG_PM */ EXPORT_SYMBOL_GPL(ata_pci_default_filter); EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); #endif /* CONFIG_PCI */ +#ifdef CONFIG_PM EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); EXPORT_SYMBOL_GPL(ata_scsi_device_resume); +#endif /* CONFIG_PM */ EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_port_schedule_eh); |