diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
| -rw-r--r-- | drivers/ata/libata-core.c | 316 |
1 files changed, 209 insertions, 107 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 46cd3f4c6aa..677c0c1b03b 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1,7 +1,7 @@ /* * libata-core.c - helper library for ATA * - * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Maintained by: Tejun Heo <tj@kernel.org> * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * @@ -569,10 +569,10 @@ void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis) fis[14] = 0; fis[15] = tf->ctl; - fis[16] = 0; - fis[17] = 0; - fis[18] = 0; - fis[19] = 0; + fis[16] = tf->auxiliary & 0xff; + fis[17] = (tf->auxiliary >> 8) & 0xff; + fis[18] = (tf->auxiliary >> 16) & 0xff; + fis[19] = (tf->auxiliary >> 24) & 0xff; } /** @@ -1524,7 +1524,7 @@ static void ata_qc_complete_internal(struct ata_queued_cmd *qc) * @dev: Device to which the command is sent * @tf: Taskfile registers for the command and the result * @cdb: CDB for packet command - * @dma_dir: Data tranfer direction of the command + * @dma_dir: Data transfer direction of the command * @sgl: sg list for the data buffer of the command * @n_elem: Number of sg entries * @timeout: Timeout in msecs (0 for default) @@ -1602,6 +1602,12 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, qc->tf = *tf; if (cdb) memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); + + /* some SATA bridges need us to indicate data xfer direction */ + if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) && + dma_dir == DMA_FROM_DEVICE) + qc->tf.feature |= ATAPI_DMADIR; + qc->flags |= ATA_QCFLAG_RESULT_TF; qc->dma_dir = dma_dir; if (dma_dir != DMA_NONE) { @@ -1706,7 +1712,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, * @dev: Device to which the command is sent * @tf: Taskfile registers for the command and the result * @cdb: CDB for packet command - * @dma_dir: Data tranfer direction of the command + * @dma_dir: Data transfer direction of the command * @buf: Data buffer of the command * @buflen: Length of data buffer * @timeout: Timeout in msecs (0 for default) @@ -2133,6 +2139,29 @@ static int ata_dev_config_ncq(struct ata_device *dev, else snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth, ddepth, aa_desc); + + if ((ap->flags & ATA_FLAG_FPDMA_AUX) && + ata_id_has_ncq_send_and_recv(dev->id)) { + err_mask = ata_read_log_page(dev, ATA_LOG_NCQ_SEND_RECV, + 0, ap->sector_buf, 1); + if (err_mask) { + ata_dev_dbg(dev, + "failed to get NCQ Send/Recv Log Emask 0x%x\n", + err_mask); + } else { + u8 *cmds = dev->ncq_send_recv_cmds; + + dev->flags |= ATA_DFLAG_NCQ_SEND_RECV; + memcpy(cmds, ap->sector_buf, ATA_LOG_NCQ_SEND_RECV_SIZE); + + if (dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM) { + ata_dev_dbg(dev, "disabling queued TRIM support\n"); + cmds[ATA_LOG_NCQ_SEND_RECV_DSM_OFFSET] &= + ~ATA_LOG_NCQ_SEND_RECV_DSM_TRIM; + } + } + } + return 0; } @@ -2193,6 +2222,16 @@ int ata_dev_configure(struct ata_device *dev) if (rc) return rc; + /* some WD SATA-1 drives have issues with LPM, turn on NOLPM for them */ + if ((dev->horkage & ATA_HORKAGE_WD_BROKEN_LPM) && + (id[ATA_ID_SATA_CAPABILITY] & 0xe) == 0x2) + dev->horkage |= ATA_HORKAGE_NOLPM; + + if (dev->horkage & ATA_HORKAGE_NOLPM) { + ata_dev_warn(dev, "LPM support broken, forcing max_power\n"); + dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER; + } + /* let ACPI work its magic */ rc = ata_acpi_on_devcfg(dev); if (rc) @@ -2329,7 +2368,7 @@ int ata_dev_configure(struct ata_device *dev) * from SATA Settings page of Identify Device Data Log. */ if (ata_id_has_devslp(dev->id)) { - u8 sata_setting[ATA_SECT_SIZE]; + u8 *sata_setting = ap->sector_buf; int i, j; dev->flags |= ATA_DFLAG_DEVSLP; @@ -2395,13 +2434,15 @@ int ata_dev_configure(struct ata_device *dev) cdb_intr_string = ", CDB intr"; } - if (atapi_dmadir || atapi_id_dmadir(dev->id)) { + if (atapi_dmadir || (dev->horkage & ATA_HORKAGE_ATAPI_DMADIR) || atapi_id_dmadir(dev->id)) { dev->flags |= ATA_DFLAG_DMADIR; dma_dir_string = ", DMADIR"; } - if (ata_id_has_da(dev->id)) + if (ata_id_has_da(dev->id)) { dev->flags |= ATA_DFLAG_DA; + zpodd_init(dev); + } /* print device info to dmesg */ if (ata_msg_drv(ap) && print_info) @@ -2437,6 +2478,9 @@ int ata_dev_configure(struct ata_device *dev) dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128, dev->max_sectors); + if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48) + dev->max_sectors = ATA_MAX_SECTORS_LBA48; + if (ap->ops->dev_config) ap->ops->dev_config(dev); @@ -4098,6 +4142,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Weird ATAPI devices */ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA }, + { "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, + { "Slimtype DVD A DS8A9SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, /* Devices we expect to fail diagnostics */ @@ -4127,6 +4173,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, + /* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */ + { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA }, + { "ST1000LM024 HN-M101MBB", "2BA30001", ATA_HORKAGE_BROKEN_FPDMA_AA }, + /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, @@ -4173,6 +4223,29 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, + /* devices that don't properly handle queued TRIM commands */ + { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Crucial_CT???M500SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Micron_M550*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + { "Crucial_CT???M550SSD*", NULL, ATA_HORKAGE_NO_NCQ_TRIM, }, + + /* + * Some WD SATA-I drives spin up and down erratically when the link + * is put into the slumber mode. We don't have full list of the + * affected devices. Disable LPM if the device matches one of the + * known prefixes and is SATA-1. As a side effect LPM partial is + * lost too. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=57211 + */ + { "WDC WD800JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD1200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD1600JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD2000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD2500JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD3000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD3200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + /* End Marker */ { } }; @@ -4714,6 +4787,10 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * ata_qc_new - Request an available ATA command, for queueing * @ap: target port * + * Some ATA host controllers may implement a queue depth which is less + * than ATA_MAX_QUEUE. So we shouldn't allocate a tag which is beyond + * the hardware limitation. + * * LOCKING: * None. */ @@ -4721,21 +4798,27 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) { struct ata_queued_cmd *qc = NULL; - unsigned int i; + unsigned int max_queue = ap->host->n_tags; + unsigned int i, tag; /* no command while frozen */ if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) return NULL; - /* the last tag is reserved for internal command. */ - for (i = 0; i < ATA_MAX_QUEUE - 1; i++) - if (!test_and_set_bit(i, &ap->qc_allocated)) { - qc = __ata_qc_from_tag(ap, i); + for (i = 0, tag = ap->last_tag + 1; i < max_queue; i++, tag++) { + tag = tag < max_queue ? tag : 0; + + /* the last tag is reserved for internal command. */ + if (tag == ATA_TAG_INTERNAL) + continue; + + if (!test_and_set_bit(tag, &ap->qc_allocated)) { + qc = __ata_qc_from_tag(ap, tag); + qc->tag = tag; + ap->last_tag = tag; break; } - - if (qc) - qc->tag = i; + } return qc; } @@ -5281,22 +5364,17 @@ bool ata_link_offline(struct ata_link *link) } #ifdef CONFIG_PM -static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg, - unsigned int action, unsigned int ehi_flags, - int *async) +static void ata_port_request_pm(struct ata_port *ap, pm_message_t mesg, + unsigned int action, unsigned int ehi_flags, + bool async) { struct ata_link *link; unsigned long flags; - int rc = 0; /* Previous resume operation might still be in * progress. Wait for PM_PENDING to clear. */ if (ap->pflags & ATA_PFLAG_PM_PENDING) { - if (async) { - *async = -EAGAIN; - return 0; - } ata_port_wait_eh(ap); WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); } @@ -5305,11 +5383,6 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg, spin_lock_irqsave(ap->lock, flags); ap->pm_mesg = mesg; - if (async) - ap->pm_result = async; - else - ap->pm_result = &rc; - ap->pflags |= ATA_PFLAG_PM_PENDING; ata_for_each_link(link, ap, HOST_FIRST) { link->eh_info.action |= action; @@ -5320,111 +5393,129 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg, spin_unlock_irqrestore(ap->lock, flags); - /* wait and check result */ if (!async) { ata_port_wait_eh(ap); WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING); } - - return rc; } -static int __ata_port_suspend_common(struct ata_port *ap, pm_message_t mesg, int *async) -{ - unsigned int ehi_flags = ATA_EHI_QUIET; - int rc; - - /* - * On some hardware, device fails to respond after spun down - * for suspend. As the device won't be used before being - * resumed, we don't need to touch the device. Ask EH to skip - * the usual stuff and proceed directly to suspend. - * - * http://thread.gmane.org/gmane.linux.ide/46764 - */ - if (mesg.event == PM_EVENT_SUSPEND) - ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY; +/* + * On some hardware, device fails to respond after spun down for suspend. As + * the device won't be used before being resumed, we don't need to touch the + * device. Ask EH to skip the usual stuff and proceed directly to suspend. + * + * http://thread.gmane.org/gmane.linux.ide/46764 + */ +static const unsigned int ata_port_suspend_ehi = ATA_EHI_QUIET + | ATA_EHI_NO_AUTOPSY + | ATA_EHI_NO_RECOVERY; - rc = ata_port_request_pm(ap, mesg, 0, ehi_flags, async); - return rc; +static void ata_port_suspend(struct ata_port *ap, pm_message_t mesg) +{ + ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, false); } -static int ata_port_suspend_common(struct device *dev, pm_message_t mesg) +static void ata_port_suspend_async(struct ata_port *ap, pm_message_t mesg) { - struct ata_port *ap = to_ata_port(dev); - - return __ata_port_suspend_common(ap, mesg, NULL); + ata_port_request_pm(ap, mesg, 0, ata_port_suspend_ehi, true); } -static int ata_port_suspend(struct device *dev) +static int ata_port_pm_suspend(struct device *dev) { + struct ata_port *ap = to_ata_port(dev); + if (pm_runtime_suspended(dev)) return 0; - return ata_port_suspend_common(dev, PMSG_SUSPEND); + ata_port_suspend(ap, PMSG_SUSPEND); + return 0; } -static int ata_port_do_freeze(struct device *dev) +static int ata_port_pm_freeze(struct device *dev) { - if (pm_runtime_suspended(dev)) - pm_runtime_resume(dev); - - return ata_port_suspend_common(dev, PMSG_FREEZE); -} + struct ata_port *ap = to_ata_port(dev); -static int ata_port_poweroff(struct device *dev) -{ if (pm_runtime_suspended(dev)) return 0; - return ata_port_suspend_common(dev, PMSG_HIBERNATE); + ata_port_suspend(ap, PMSG_FREEZE); + return 0; } -static int __ata_port_resume_common(struct ata_port *ap, int *async) +static int ata_port_pm_poweroff(struct device *dev) { - int rc; + ata_port_suspend(to_ata_port(dev), PMSG_HIBERNATE); + return 0; +} - rc = ata_port_request_pm(ap, PMSG_ON, ATA_EH_RESET, - ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, async); - return rc; +static const unsigned int ata_port_resume_ehi = ATA_EHI_NO_AUTOPSY + | ATA_EHI_QUIET; + +static void ata_port_resume(struct ata_port *ap, pm_message_t mesg) +{ + ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, false); } -static int ata_port_resume_common(struct device *dev) +static void ata_port_resume_async(struct ata_port *ap, pm_message_t mesg) { - struct ata_port *ap = to_ata_port(dev); + ata_port_request_pm(ap, mesg, ATA_EH_RESET, ata_port_resume_ehi, true); +} - return __ata_port_resume_common(ap, NULL); +static int ata_port_pm_resume(struct device *dev) +{ + ata_port_resume_async(to_ata_port(dev), PMSG_RESUME); + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + return 0; } -static int ata_port_resume(struct device *dev) +/* + * For ODDs, the upper layer will poll for media change every few seconds, + * which will make it enter and leave suspend state every few seconds. And + * as each suspend will cause a hard/soft reset, the gain of runtime suspend + * is very little and the ODD may malfunction after constantly being reset. + * So the idle callback here will not proceed to suspend if a non-ZPODD capable + * ODD is attached to the port. + */ +static int ata_port_runtime_idle(struct device *dev) { - int rc; + struct ata_port *ap = to_ata_port(dev); + struct ata_link *link; + struct ata_device *adev; - rc = ata_port_resume_common(dev); - if (!rc) { - pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); + ata_for_each_link(link, ap, HOST_FIRST) { + ata_for_each_dev(adev, link, ENABLED) + if (adev->class == ATA_DEV_ATAPI && + !zpodd_dev_enabled(adev)) + return -EBUSY; } - return rc; + return 0; } -static int ata_port_runtime_idle(struct device *dev) +static int ata_port_runtime_suspend(struct device *dev) { - return pm_runtime_suspend(dev); + ata_port_suspend(to_ata_port(dev), PMSG_AUTO_SUSPEND); + return 0; +} + +static int ata_port_runtime_resume(struct device *dev) +{ + ata_port_resume(to_ata_port(dev), PMSG_AUTO_RESUME); + return 0; } static const struct dev_pm_ops ata_port_pm_ops = { - .suspend = ata_port_suspend, - .resume = ata_port_resume, - .freeze = ata_port_do_freeze, - .thaw = ata_port_resume, - .poweroff = ata_port_poweroff, - .restore = ata_port_resume, - - .runtime_suspend = ata_port_suspend, - .runtime_resume = ata_port_resume_common, + .suspend = ata_port_pm_suspend, + .resume = ata_port_pm_resume, + .freeze = ata_port_pm_freeze, + .thaw = ata_port_pm_resume, + .poweroff = ata_port_pm_poweroff, + .restore = ata_port_pm_resume, + + .runtime_suspend = ata_port_runtime_suspend, + .runtime_resume = ata_port_runtime_resume, .runtime_idle = ata_port_runtime_idle, }; @@ -5433,18 +5524,17 @@ static const struct dev_pm_ops ata_port_pm_ops = { * level. sas suspend/resume is async to allow parallel port recovery * since sas has multiple ata_port instances per Scsi_Host. */ -int ata_sas_port_async_suspend(struct ata_port *ap, int *async) +void ata_sas_port_suspend(struct ata_port *ap) { - return __ata_port_suspend_common(ap, PMSG_SUSPEND, async); + ata_port_suspend_async(ap, PMSG_SUSPEND); } -EXPORT_SYMBOL_GPL(ata_sas_port_async_suspend); +EXPORT_SYMBOL_GPL(ata_sas_port_suspend); -int ata_sas_port_async_resume(struct ata_port *ap, int *async) +void ata_sas_port_resume(struct ata_port *ap) { - return __ata_port_resume_common(ap, async); + ata_port_resume_async(ap, PMSG_RESUME); } -EXPORT_SYMBOL_GPL(ata_sas_port_async_resume); - +EXPORT_SYMBOL_GPL(ata_sas_port_resume); /** * ata_host_suspend - suspend host @@ -5608,6 +5698,7 @@ struct ata_port *ata_port_alloc(struct ata_host *host) ap->pflags |= ATA_PFLAG_INITIALIZING | ATA_PFLAG_FROZEN; ap->lock = &host->lock; ap->print_id = -1; + ap->local_port_no = -1; ap->host = host; ap->dev = host->dev; @@ -6002,6 +6093,7 @@ void ata_host_init(struct ata_host *host, struct device *dev, { spin_lock_init(&host->lock); mutex_init(&host->eh_mutex); + host->n_tags = ATA_MAX_QUEUE - 1; host->dev = dev; host->ops = ops; } @@ -6083,6 +6175,8 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) { int i, rc; + host->n_tags = clamp(sht->can_queue, 1, ATA_MAX_QUEUE - 1); + /* host must have been started */ if (!(host->flags & ATA_HOST_STARTED)) { dev_err(host->dev, "BUG: trying to register unstarted host\n"); @@ -6098,9 +6192,10 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) kfree(host->ports[i]); /* give ports names and add SCSI hosts */ - for (i = 0; i < host->n_ports; i++) + for (i = 0; i < host->n_ports; i++) { host->ports[i]->print_id = atomic_inc_return(&ata_print_id); - + host->ports[i]->local_port_no = i + 1; + } /* Create associated sysfs transport objects */ for (i = 0; i < host->n_ports; i++) { @@ -6227,6 +6322,8 @@ int ata_host_activate(struct ata_host *host, int irq, static void ata_port_detach(struct ata_port *ap) { unsigned long flags; + struct ata_link *link; + struct ata_device *dev; if (!ap->ops->error_handler) goto skip_eh; @@ -6246,15 +6343,21 @@ static void ata_port_detach(struct ata_port *ap) cancel_delayed_work_sync(&ap->hotplug_task); skip_eh: + /* clean up zpodd on port removal */ + ata_for_each_link(link, ap, HOST_FIRST) { + ata_for_each_dev(dev, link, ALL) { + if (zpodd_dev_enabled(dev)) + zpodd_exit(dev); + } + } if (ap->pmp_link) { int i; for (i = 0; i < SATA_PMP_MAX_PORTS; i++) ata_tlink_delete(&ap->pmp_link[i]); } - ata_tport_delete(ap); - /* remove the associated SCSI host */ scsi_remove_host(ap->scsi_host); + ata_tport_delete(ap); } /** @@ -6466,6 +6569,8 @@ static int __init ata_parse_force_one(char **cur, { "nosrst", .lflags = ATA_LFLAG_NO_SRST }, { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST }, { "rstonce", .lflags = ATA_LFLAG_RST_ONCE }, + { "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR }, + { "disable", .horkage_on = ATA_HORKAGE_DISABLE }, }; char *start = *cur, *p = *cur; char *id, *val, *endp; @@ -6593,8 +6698,6 @@ static int __init ata_init(void) ata_parse_force_param(); - ata_acpi_register(); - rc = ata_sff_init(); if (rc) { kfree(ata_force_tbl); @@ -6621,7 +6724,6 @@ static void __exit ata_exit(void) ata_release_transport(ata_scsi_transport_template); libata_transport_exit(); ata_sff_exit(); - ata_acpi_unregister(); kfree(ata_force_tbl); } |