diff options
Diffstat (limited to 'drivers/ata/Kconfig')
| -rw-r--r-- | drivers/ata/Kconfig | 708 |
1 files changed, 488 insertions, 220 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 0bcf2646467..2664da32d9d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -2,14 +2,22 @@ # SATA/PATA driver configuration # +config HAVE_PATA_PLATFORM + bool + help + This is an internal configuration node for any machine that + uses pata-platform driver to enable the relevant driver in the + configuration structure without having to submit endless patches + to update the PATA_PLATFORM entry. + menuconfig ATA - tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" + tristate "Serial ATA and Parallel ATA drivers (libata)" depends on HAS_IOMEM depends on BLOCK - depends on !(M32R || M68K) || BROKEN + depends on !(M32R || M68K || S390) || BROKEN select SCSI ---help--- - If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or + If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or any other ATA device under Linux, say Y and make sure that you know the name of your ATA host adapter (the card inside your computer that "speaks" the ATA protocol, also called ATA controller), @@ -26,10 +34,20 @@ config ATA_NONSTANDARD bool default n +config ATA_VERBOSE_ERROR + bool "Verbose ATA error reporting" + default y + help + This option adds parsing of ATA command descriptions and error bits + in libata kernel output, making it easier to interpret. + This option will enlarge the kernel by approx. 6KB. Disable it only + if kernel size is more important than ease of debugging. + + If unsure, say Y. + config ATA_ACPI bool "ATA ACPI Support" depends on ACPI && PCI - select ACPI_DOCK default y help This option adds support for ATA-related ACPI objects. @@ -40,6 +58,20 @@ config ATA_ACPI You can disable this at kernel boot time by using the option libata.noacpi=1 +config SATA_ZPODD + bool "SATA Zero Power Optical Disc Drive (ZPODD) support" + depends on ATA_ACPI && PM_RUNTIME + default n + help + This option adds support for SATA Zero Power Optical Disc + Drive (ZPODD). It requires both the ODD and the platform + support, and if enabled, will automatically power on/off the + ODD when certain condition is satisfied. This does not impact + end user's experience of the ODD, only power is saved when + the ODD is not in use (i.e. no disc inside). + + If unsure, say N. + config SATA_PMP bool "SATA Port Multiplier support" default y @@ -47,6 +79,8 @@ config SATA_PMP This option adds support for SATA Port Multipliers (the SATA version of an ethernet hub, or SAS expander). +comment "Controllers with non-SFF native interface" + config SATA_AHCI tristate "AHCI SATA support" depends on PCI @@ -55,14 +89,64 @@ config SATA_AHCI If unsure, say N. -config SATA_SIL24 - tristate "Silicon Image 3124/3132 SATA support" - depends on PCI +config SATA_AHCI_PLATFORM + tristate "Platform AHCI SATA support" help - This option enables support for Silicon Image 3124/3132 Serial ATA. + This option enables support for Platform AHCI Serial ATA + controllers. + + If unsure, say N. + +config AHCI_DA850 + tristate "DaVinci DA850 AHCI SATA support" + depends on ARCH_DAVINCI_DA850 + help + This option enables support for the DaVinci DA850 SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_ST + tristate "ST AHCI SATA support" + depends on ARCH_STI + help + This option enables support for ST AHCI SATA controller. If unsure, say N. +config AHCI_IMX + tristate "Freescale i.MX AHCI SATA support" + depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) + help + This option enables support for the Freescale i.MX SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_MVEBU + tristate "Marvell EBU AHCI SATA support" + depends on ARCH_MVEBU + help + This option enables support for the Marvebu EBU SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_SUNXI + tristate "Allwinner sunxi AHCI SATA support" + depends on ARCH_SUNXI + help + This option enables support for the Allwinner sunxi SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_XGENE + tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" + depends on PHY_XGENE + help + This option enables support for APM X-Gene SoC SATA host controller. + config SATA_FSL tristate "Freescale 3.0Gbps SATA support" depends on FSL_SOC @@ -72,8 +156,30 @@ config SATA_FSL If unsure, say N. +config SATA_INIC162X + tristate "Initio 162x SATA support (Very Experimental)" + depends on PCI + help + This option enables support for Initio 162x Serial ATA. + +config SATA_ACARD_AHCI + tristate "ACard AHCI variant (ATP 8620)" + depends on PCI + help + This option enables support for Acard. + + If unsure, say N. + +config SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on PCI + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + config ATA_SFF - bool "ATA SFF support" + bool "ATA SFF support (for legacy IDE and PATA)" default y help This option adds support for ATA controllers with SFF @@ -86,21 +192,61 @@ config ATA_SFF For users with exclusively modern controllers like AHCI, Silicon Image 3124, or Marvell 6440, you may choose to - disable this uneeded SFF support. + disable this unneeded SFF support. If unsure, say Y. if ATA_SFF -config SATA_SVW - tristate "ServerWorks Frodo / Apple K2 SATA support" +comment "SFF controllers with custom DMA interface" + +config PDC_ADMA + tristate "Pacific Digital ADMA support" depends on PCI help - This option enables support for Broadcom/Serverworks/Apple K2 - SATA support. + This option enables support for Pacific Digital ADMA controllers + + If unsure, say N. + +config PATA_OCTEON_CF + tristate "OCTEON Boot Bus Compact Flash support" + depends on CAVIUM_OCTEON_SOC + help + This option enables a polled compact flash driver for use with + compact flash cards attached to the OCTEON boot bus. + + If unsure, say N. + +config SATA_QSTOR + tristate "Pacific Digital SATA QStor support" + depends on PCI + help + This option enables support for Pacific Digital Serial ATA QStor. + + If unsure, say N. + +config SATA_SX4 + tristate "Promise SATA SX4 support (Experimental)" + depends on PCI + help + This option enables support for Promise Serial ATA SX4. If unsure, say N. +config ATA_BMDMA + bool "ATA BMDMA support" + default y + help + This option adds support for SFF ATA controllers with BMDMA + capability. BMDMA stands for bus-master DMA and is the + de facto DMA interface for SFF controllers. + + If unsure, say Y. + +if ATA_BMDMA + +comment "SATA SFF controllers with BMDMA" + config ATA_PIIX tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" depends on PCI @@ -111,36 +257,62 @@ config ATA_PIIX If unsure, say N. -config SATA_MV - tristate "Marvell SATA support" +config SATA_DWC + tristate "DesignWare Cores SATA support" + depends on 460EX help - This option enables support for the Marvell Serial ATA family. - Currently supports 88SX[56]0[48][01] PCI(-X) chips, - as well as the newer [67]042 PCI-X/PCIe and SOC devices. + This option enables support for the on-chip SATA controller of the + AppliedMicro processor 460EX. If unsure, say N. -config SATA_NV - tristate "NVIDIA SATA support" - depends on PCI +config SATA_DWC_DEBUG + bool "Debugging driver version" + depends on SATA_DWC help - This option enables support for NVIDIA Serial ATA. + This option enables debugging output in the driver. + +config SATA_DWC_VDEBUG + bool "Verbose debug output" + depends on SATA_DWC_DEBUG + help + This option enables the taskfile dumping and NCQ debugging. + +config SATA_DWC_PMP + tristate "DesignWare Cores SATA with PMP support" + depends on 460EX + help + This option enables support for the on-chip SATA controller of the + AppliedMicro processor 460EX with PMP support. If unsure, say N. -config PDC_ADMA - tristate "Pacific Digital ADMA support" - depends on PCI +config SATA_HIGHBANK + tristate "Calxeda Highbank SATA support" + depends on ARCH_HIGHBANK || COMPILE_TEST help - This option enables support for Pacific Digital ADMA controllers + This option enables support for the Calxeda Highbank SoC's + onboard SATA. If unsure, say N. -config SATA_QSTOR - tristate "Pacific Digital SATA QStor support" +config SATA_MV + tristate "Marvell SATA support" + depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \ + ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST + select GENERIC_PHY + help + This option enables support for the Marvell Serial ATA family. + Currently supports 88SX[56]0[48][01] PCI(-X) chips, + as well as the newer [67]042 PCI-X/PCIe and SOC devices. + + If unsure, say N. + +config SATA_NV + tristate "NVIDIA SATA support" depends on PCI help - This option enables support for Pacific Digital Serial ATA QStor. + This option enables support for NVIDIA Serial ATA. If unsure, say N. @@ -152,11 +324,11 @@ config SATA_PROMISE If unsure, say N. -config SATA_SX4 - tristate "Promise SATA SX4 support (Experimental)" - depends on PCI && EXPERIMENTAL +config SATA_RCAR + tristate "Renesas R-Car SATA support" + depends on ARCH_SHMOBILE || COMPILE_TEST help - This option enables support for Promise Serial ATA SX4. + This option enables support for Renesas R-Car Serial ATA. If unsure, say N. @@ -179,6 +351,15 @@ config SATA_SIS enable the PATA_SIS driver in the config. If unsure, say N. +config SATA_SVW + tristate "ServerWorks Frodo / Apple K2 SATA support" + depends on PCI + help + This option enables support for Broadcom/Serverworks/Apple K2 + SATA support. + + If unsure, say N. + config SATA_ULI tristate "ULi Electronics SATA support" depends on PCI @@ -203,20 +384,7 @@ config SATA_VITESSE If unsure, say N. -config SATA_INIC162X - tristate "Initio 162x SATA support" - depends on PCI - help - This option enables support for Initio 162x Serial ATA. - -config PATA_ACPI - tristate "ACPI firmware driver for PATA" - depends on ATA_ACPI - help - This option enables an ACPI method driver which drives - motherboard PATA controller interfaces through the ACPI - firmware in the BIOS. This driver can sometimes handle - otherwise unsupported hardware. +comment "PATA SFF controllers with BMDMA" config PATA_ALI tristate "ALi PATA support" @@ -236,6 +404,14 @@ config PATA_AMD If unsure, say N. +config PATA_ARASAN_CF + tristate "ARASAN CompactFlash PATA Controller Support" + depends on ARCH_SPEAR13XX || COMPILE_TEST + depends on DMADEVICES + select DMA_ENGINE + help + Say Y here to support the ARASAN CompactFlash PATA controller + config PATA_ARTOP tristate "ARTOP 6210/6260 PATA support" depends on PCI @@ -244,15 +420,6 @@ config PATA_ARTOP If unsure, say N. -config PATA_AT32 - tristate "Atmel AVR32 PATA support (Experimental)" - depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL - help - This option enables support for the IDE devices on the - Atmel AT32AP platform. - - If unsure, say N. - config PATA_ATIIXP tristate "ATI PATA support" depends on PCI @@ -262,13 +429,21 @@ config PATA_ATIIXP If unsure, say N. -config PATA_CMD640_PCI - tristate "CMD640 PCI PATA support (Experimental)" - depends on PCI && EXPERIMENTAL +config PATA_ATP867X + tristate "ARTOP/Acard ATP867X PATA support" + depends on PCI help - This option enables support for the CMD640 PCI IDE - interface chip. Only the primary channel is currently - supported. + This option enables support for ARTOP/Acard ATP867X PATA + controllers. + + If unsure, say N. + +config PATA_BF54X + tristate "Blackfin 54x ATAPI support" + depends on BF542 || BF548 || BF549 + help + This option enables support for the built-in ATAPI controller on + Blackfin 54x family chips. If unsure, say N. @@ -283,7 +458,7 @@ config PATA_CMD64X config PATA_CS5520 tristate "CS5510/5520 PATA support" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) help This option enables support for the Cyrix 5510/5520 companion chip used with the MediaGX/Geode processor family. @@ -292,7 +467,7 @@ config PATA_CS5520 config PATA_CS5530 tristate "CS5530 PATA support" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) help This option enables support for the Cyrix/NatSemi/AMD CS5530 companion chip used with the MediaGX/Geode processor family. @@ -301,7 +476,7 @@ config PATA_CS5530 config PATA_CS5535 tristate "CS5535 PATA support (Experimental)" - depends on PCI && X86 && !X86_64 && EXPERIMENTAL + depends on PCI && X86_32 help This option enables support for the NatSemi/AMD CS5535 companion chip used with the Geode processor family. @@ -310,7 +485,7 @@ config PATA_CS5535 config PATA_CS5536 tristate "CS5536 PATA support" - depends on PCI && X86 && !X86_64 + depends on PCI && (X86_32 || MIPS || COMPILE_TEST) help This option enables support for the AMD CS5536 companion chip used with the Geode LX processor family. @@ -319,7 +494,7 @@ config PATA_CS5536 config PATA_CYPRESS tristate "Cypress CY82C693 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for the Cypress/Contaq CY82C693 chipset found in some Alpha systems @@ -335,12 +510,12 @@ config PATA_EFAR If unsure, say N. -config ATA_GENERIC - tristate "Generic ATA support" - depends on PCI +config PATA_EP93XX + tristate "Cirrus Logic EP93xx PATA support" + depends on ARCH_EP93XX help - This option enables support for generic BIOS configured - ATA controllers via the new ATA layer + This option enables support for the PATA controller in + the Cirrus Logic EP9312 and EP9315 ARM CPU. If unsure, say N. @@ -354,8 +529,8 @@ config PATA_HPT366 If unsure, say N. config PATA_HPT37X - tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "HPT 370/370A/371/372/374/302 PATA support" + depends on PCI help This option enables support for the majority of the later HPT PATA controllers via the new ATA layer. @@ -363,11 +538,11 @@ config PATA_HPT37X If unsure, say N. config PATA_HPT3X2N - tristate "HPT 372N/302N PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "HPT 371N/372N/302N PATA support" + depends on PCI help This option enables support for the N variant HPT PATA - controllers via the new ATA layer + controllers via the new ATA layer. If unsure, say N. @@ -381,67 +556,66 @@ config PATA_HPT3X3 If unsure, say N. config PATA_HPT3X3_DMA - bool "HPT 343/363 DMA support (Experimental)" + bool "HPT 343/363 DMA support" depends on PATA_HPT3X3 help This option enables DMA support for the HPT343/363 controllers. Enable with care as there are still some problems with DMA on this chipset. -config PATA_ISAPNP - tristate "ISA Plug and Play PATA support" - depends on ISAPNP +config PATA_ICSIDE + tristate "Acorn ICS PATA support" + depends on ARM && ARCH_ACORN help - This option enables support for ISA plug & play ATA - controllers such as those found on old soundcards. - - If unsure, say N. + On Acorn systems, say Y here if you wish to use the ICS PATA + interface card. This is not required for ICS partition support. + If you are unsure, say N to this. -config PATA_IT821X - tristate "IT8211/2 PATA support" - depends on PCI +config PATA_IMX + tristate "PATA support for Freescale iMX" + depends on ARCH_MXC help - This option enables support for the ITE 8211 and 8212 - PATA controllers via the new ATA layer, including RAID - mode. + This option enables support for the PATA host available on Freescale + iMX SoCs. If unsure, say N. config PATA_IT8213 tristate "IT8213 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for the ITE 821 PATA controllers via the new ATA layer. If unsure, say N. -config PATA_JMICRON - tristate "JMicron PATA support" +config PATA_IT821X + tristate "IT8211/2 PATA support" depends on PCI help - Enable support for the JMicron IDE controller, via the new - ATA layer. + This option enables support for the ITE 8211 and 8212 + PATA controllers via the new ATA layer, including RAID + mode. If unsure, say N. -config PATA_LEGACY - tristate "Legacy ISA PATA support (Experimental)" - depends on ISA && EXPERIMENTAL +config PATA_JMICRON + tristate "JMicron PATA support" + depends on PCI help - This option enables support for ISA/VLB bus legacy PATA - ports and allows them to be accessed via the new ATA layer. + Enable support for the JMicron IDE controller, via the new + ATA layer. If unsure, say N. -config PATA_TRIFLEX - tristate "Compaq Triflex PATA support" - depends on PCI +config PATA_MACIO + tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" + depends on PPC_PMAC help - Enable support for the Compaq 'Triflex' IDE controller as found - on many Compaq Pentium-Pro systems, via the new ATA layer. - - If unsure, say N. + Most IDE capable PowerMacs have IDE busses driven by a variant + of this controller which is part of the Apple chipset used on + most PowerMac models. Some models have multiple busses using + different chipsets, though generally, MacIO is one of them. config PATA_MARVELL tristate "Marvell PATA support via legacy mode" @@ -464,22 +638,6 @@ config PATA_MPC52xx If unsure, say N. -config PATA_MPIIX - tristate "Intel PATA MPIIX support" - depends on PCI - help - This option enables support for MPIIX PATA support. - - If unsure, say N. - -config PATA_OLDPIIX - tristate "Intel PATA old PIIX support" - depends on PCI - help - This option enables support for early PIIX PATA support. - - If unsure, say N. - config PATA_NETCELL tristate "NETCELL Revolution RAID support" depends on PCI @@ -490,23 +648,14 @@ config PATA_NETCELL If unsure, say N. config PATA_NINJA32 - tristate "Ninja32/Delkin Cardbus ATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Ninja32/Delkin Cardbus ATA support" + depends on PCI help This option enables support for the Ninja32, Delkin and possibly other brands of Cardbus ATA adapter If unsure, say N. -config PATA_NS87410 - tristate "Nat Semi NS87410 PATA support" - depends on PCI - help - This option enables support for the National Semiconductor - NS87410 PCI-IDE controller. - - If unsure, say N. - config PATA_NS87415 tristate "Nat Semi NS87415 PATA support" depends on PCI @@ -516,18 +665,17 @@ config PATA_NS87415 If unsure, say N. -config PATA_OPTI - tristate "OPTI621/6215 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL +config PATA_OLDPIIX + tristate "Intel PATA old PIIX support" + depends on PCI help - This option enables full PIO support for the early Opti ATA - controllers found on some old motherboards. + This option enables support for early PIIX PATA support. If unsure, say N. config PATA_OPTIDMA tristate "OPTI FireStar PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables DMA/PIO support for the later OPTi controllers found on some old motherboards and in some @@ -535,12 +683,11 @@ config PATA_OPTIDMA If unsure, say N. -config PATA_PCMCIA - tristate "PCMCIA PATA support" - depends on PCMCIA +config PATA_PDC2027X + tristate "Promise PATA 2027x support" + depends on PCI help - This option enables support for PCMCIA ATA interfaces, including - compact flash card adapters via the new ATA layer. + This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. If unsure, say N. @@ -553,62 +700,58 @@ config PATA_PDC_OLD If unsure, say N. -config PATA_QDI - tristate "QDI VLB PATA support" - depends on ISA - help - Support for QDI 6500 and 6580 PATA controllers on VESA local bus. - config PATA_RADISYS tristate "RADISYS 82600 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for the RADISYS 82600 PATA controllers via the new ATA layer If unsure, say N. -config PATA_RB532 - tristate "RouterBoard 532 PATA CompactFlash support" - depends on MIKROTIK_RB532 - help - This option enables support for the RouterBoard 532 - PATA CompactFlash controller. - - If unsure, say N. - -config PATA_RZ1000 - tristate "PC Tech RZ1000 PATA support" +config PATA_RDC + tristate "RDC PATA support" depends on PCI help - This option enables basic support for the PC Tech RZ1000/1 - PATA controllers via the new ATA layer + This option enables basic support for the later RDC PATA controllers + controllers via the new ATA layer. For the RDC 1010, you need to + enable the IT821X driver instead. If unsure, say N. config PATA_SC1200 tristate "SC1200 PATA support" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) help This option enables support for the NatSemi/AMD SC1200 SoC companion chip used with the Geode processor family. If unsure, say N. -config PATA_SERVERWORKS - tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" +config PATA_SCC + tristate "Toshiba's Cell Reference Set IDE support" + depends on PCI && PPC_CELLEB + help + This option enables support for the built-in IDE controller on + Toshiba Cell Reference Board. + + If unsure, say N. + +config PATA_SCH + tristate "Intel SCH PATA support" depends on PCI help - This option enables support for the Serverworks OSB4/CSB5/CSB6 and - HT1000 PATA controllers, via the new ATA layer. + This option enables support for Intel SCH PATA on the Intel + SCH (US15W, US15L, UL11L) series host controllers. If unsure, say N. -config PATA_PDC2027X - tristate "Promise PATA 2027x support" +config PATA_SERVERWORKS + tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" depends on PCI help - This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. + This option enables support for the Serverworks OSB4/CSB5/CSB6 and + HT1000 PATA controllers, via the new ATA layer. If unsure, say N. @@ -628,6 +771,24 @@ config PATA_SIS If unsure, say N. +config PATA_TOSHIBA + tristate "Toshiba Piccolo support (Experimental)" + depends on PCI + help + Support for the Toshiba Piccolo controllers. Currently only the + primary channel is supported by this driver. + + If unsure, say N. + +config PATA_TRIFLEX + tristate "Compaq Triflex PATA support" + depends on PCI + help + Enable support for the Compaq 'Triflex' IDE controller as found + on many Compaq Pentium-Pro systems, via the new ATA layer. + + If unsure, say N. + config PATA_VIA tristate "VIA PATA support" depends on PCI @@ -637,6 +798,17 @@ config PATA_VIA If unsure, say N. +config PATA_PXA + tristate "PXA DMA-capable PATA support" + depends on ARCH_PXA + help + This option enables support for harddrive attached to PXA CPU's bus. + + NOTE: This driver utilizes PXA DMA controller, in case your hardware + is not capable of doing MWDMA, use pata_platform instead. + + If unsure, say N. + config PATA_WINBOND tristate "Winbond SL82C105 PATA support" depends on PCI @@ -646,24 +818,103 @@ config PATA_WINBOND If unsure, say N. -config PATA_WINBOND_VLB - tristate "Winbond W83759A VLB PATA support (Experimental)" - depends on ISA && EXPERIMENTAL +endif # ATA_BMDMA + +comment "PIO-only SFF controllers" + +config PATA_AT32 + tristate "Atmel AVR32 PATA support (Experimental)" + depends on AVR32 && PLATFORM_AT32AP help - Support for the Winbond W83759A controller on Vesa Local Bus - systems. + This option enables support for the IDE devices on the + Atmel AT32AP platform. -config HAVE_PATA_PLATFORM - bool + If unsure, say N. + +config PATA_AT91 + tristate "PATA support for AT91SAM9260" + depends on ARM && SOC_AT91SAM9 help - This is an internal configuration node for any machine that - uses pata-platform driver to enable the relevant driver in the - configuration structure without having to submit endless patches - to update the PATA_PLATFORM entry. + This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. + + If unsure, say N. + +config PATA_CMD640_PCI + tristate "CMD640 PCI PATA support (Experimental)" + depends on PCI + help + This option enables support for the CMD640 PCI IDE + interface chip. Only the primary channel is currently + supported. + + If unsure, say N. + +config PATA_ISAPNP + tristate "ISA Plug and Play PATA support" + depends on ISAPNP + help + This option enables support for ISA plug & play ATA + controllers such as those found on old soundcards. + + If unsure, say N. + +config PATA_IXP4XX_CF + tristate "IXP4XX Compact Flash support" + depends on ARCH_IXP4XX + help + This option enables support for a Compact Flash connected on + the ixp4xx expansion bus. This driver had been written for + Loft/Avila boards in mind but can work with others. + + If unsure, say N. + +config PATA_MPIIX + tristate "Intel PATA MPIIX support" + depends on PCI + help + This option enables support for MPIIX PATA support. + + If unsure, say N. + +config PATA_NS87410 + tristate "Nat Semi NS87410 PATA support" + depends on PCI + help + This option enables support for the National Semiconductor + NS87410 PCI-IDE controller. + + If unsure, say N. + +config PATA_OPTI + tristate "OPTI621/6215 PATA support (Very Experimental)" + depends on PCI + help + This option enables full PIO support for the early Opti ATA + controllers found on some old motherboards. + + If unsure, say N. + +config PATA_PALMLD + tristate "Palm LifeDrive PATA support" + depends on MACH_PALMLD + help + This option enables support for Palm LifeDrive's internal ATA + port via the new ATA layer. + + If unsure, say N. + +config PATA_PCMCIA + tristate "PCMCIA PATA support" + depends on PCMCIA + help + This option enables support for PCMCIA ATA interfaces, including + compact flash card adapters via the new ATA layer. + + If unsure, say N. config PATA_PLATFORM tristate "Generic platform device PATA support" - depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM + depends on EXPERT || PPC || HAVE_PATA_PLATFORM help This option enables support for generic directly connected ATA devices commonly found on embedded systems. @@ -672,7 +923,7 @@ config PATA_PLATFORM config PATA_OF_PLATFORM tristate "OpenFirmware platform device PATA support" - depends on PATA_PLATFORM && PPC_OF + depends on PATA_PLATFORM && OF help This option enables support for generic directly connected ATA devices commonly found on embedded systems with OpenFirmware @@ -680,57 +931,74 @@ config PATA_OF_PLATFORM If unsure, say N. -config PATA_ICSIDE - tristate "Acorn ICS PATA support" - depends on ARM && ARCH_ACORN +config PATA_QDI + tristate "QDI VLB PATA support" + depends on ISA + select PATA_LEGACY help - On Acorn systems, say Y here if you wish to use the ICS PATA - interface card. This is not required for ICS partition support. - If you are unsure, say N to this. + Support for QDI 6500 and 6580 PATA controllers on VESA local bus. -config PATA_IXP4XX_CF - tristate "IXP4XX Compact Flash support" - depends on ARCH_IXP4XX +config PATA_RB532 + tristate "RouterBoard 532 PATA CompactFlash support" + depends on MIKROTIK_RB532 help - This option enables support for a Compact Flash connected on - the ixp4xx expansion bus. This driver had been written for - Loft/Avila boards in mind but can work with others. + This option enables support for the RouterBoard 532 + PATA CompactFlash controller. If unsure, say N. -config PATA_OCTEON_CF - tristate "OCTEON Boot Bus Compact Flash support" - depends on CPU_CAVIUM_OCTEON +config PATA_RZ1000 + tristate "PC Tech RZ1000 PATA support" + depends on PCI help - This option enables a polled compact flash driver for use with - compact flash cards attached to the OCTEON boot bus. + This option enables basic support for the PC Tech RZ1000/1 + PATA controllers via the new ATA layer If unsure, say N. -config PATA_SCC - tristate "Toshiba's Cell Reference Set IDE support" - depends on PCI && PPC_CELLEB +config PATA_SAMSUNG_CF + tristate "Samsung SoC PATA support" + depends on SAMSUNG_DEV_IDE help - This option enables support for the built-in IDE controller on - Toshiba Cell Reference Board. + This option enables basic support for Samsung's S3C/S5P board + PATA controllers via the new ATA layer If unsure, say N. -config PATA_SCH - tristate "Intel SCH PATA support" - depends on PCI +config PATA_WINBOND_VLB + tristate "Winbond W83759A VLB PATA support (Experimental)" + depends on ISA + select PATA_LEGACY help - This option enables support for Intel SCH PATA on the Intel - SCH (US15W, US15L, UL11L) series host controllers. + Support for the Winbond W83759A controller on Vesa Local Bus + systems. + +comment "Generic fallback / legacy drivers" + +config PATA_ACPI + tristate "ACPI firmware driver for PATA" + depends on ATA_ACPI && ATA_BMDMA + help + This option enables an ACPI method driver which drives + motherboard PATA controller interfaces through the ACPI + firmware in the BIOS. This driver can sometimes handle + otherwise unsupported hardware. + +config ATA_GENERIC + tristate "Generic ATA support" + depends on PCI && ATA_BMDMA + help + This option enables support for generic BIOS configured + ATA controllers via the new ATA layer If unsure, say N. -config PATA_BF54X - tristate "Blackfin 54x ATAPI support" - depends on BF542 || BF548 || BF549 +config PATA_LEGACY + tristate "Legacy ISA PATA support (Experimental)" + depends on (ISA || PCI) help - This option enables support for the built-in ATAPI controller on - Blackfin 54x family chips. + This option enables support for ISA/VLB/PCI bus legacy PATA + ports and allows them to be accessed via the new ATA layer. If unsure, say N. |