diff options
Diffstat (limited to 'drivers/ata/Kconfig')
| -rw-r--r-- | drivers/ata/Kconfig | 162 |
1 files changed, 138 insertions, 24 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 75afa75a515..2664da32d9d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -11,13 +11,13 @@ config HAVE_PATA_PLATFORM to update the PATA_PLATFORM entry. menuconfig ATA - tristate "Serial ATA and Parallel ATA drivers" + tristate "Serial ATA and Parallel ATA drivers (libata)" depends on HAS_IOMEM depends on BLOCK - depends on !(M32R || M68K) || BROKEN + depends on !(M32R || M68K || S390) || BROKEN select SCSI ---help--- - If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or + If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or any other ATA device under Linux, say Y and make sure that you know the name of your ATA host adapter (the card inside your computer that "speaks" the ATA protocol, also called ATA controller), @@ -58,6 +58,20 @@ config ATA_ACPI You can disable this at kernel boot time by using the option libata.noacpi=1 +config SATA_ZPODD + bool "SATA Zero Power Optical Disc Drive (ZPODD) support" + depends on ATA_ACPI && PM_RUNTIME + default n + help + This option adds support for SATA Zero Power Optical Disc + Drive (ZPODD). It requires both the ODD and the platform + support, and if enabled, will automatically power on/off the + ODD when certain condition is satisfied. This does not impact + end user's experience of the ODD, only power is saved when + the ODD is not in use (i.e. no disc inside). + + If unsure, say N. + config SATA_PMP bool "SATA Port Multiplier support" default y @@ -83,6 +97,56 @@ config SATA_AHCI_PLATFORM If unsure, say N. +config AHCI_DA850 + tristate "DaVinci DA850 AHCI SATA support" + depends on ARCH_DAVINCI_DA850 + help + This option enables support for the DaVinci DA850 SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_ST + tristate "ST AHCI SATA support" + depends on ARCH_STI + help + This option enables support for ST AHCI SATA controller. + + If unsure, say N. + +config AHCI_IMX + tristate "Freescale i.MX AHCI SATA support" + depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) + help + This option enables support for the Freescale i.MX SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_MVEBU + tristate "Marvell EBU AHCI SATA support" + depends on ARCH_MVEBU + help + This option enables support for the Marvebu EBU SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_SUNXI + tristate "Allwinner sunxi AHCI SATA support" + depends on ARCH_SUNXI + help + This option enables support for the Allwinner sunxi SoC's + onboard AHCI SATA. + + If unsure, say N. + +config AHCI_XGENE + tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" + depends on PHY_XGENE + help + This option enables support for APM X-Gene SoC SATA host controller. + config SATA_FSL tristate "Freescale 3.0Gbps SATA support" depends on FSL_SOC @@ -93,7 +157,7 @@ config SATA_FSL If unsure, say N. config SATA_INIC162X - tristate "Initio 162x SATA support" + tristate "Initio 162x SATA support (Very Experimental)" depends on PCI help This option enables support for Initio 162x Serial ATA. @@ -115,7 +179,7 @@ config SATA_SIL24 If unsure, say N. config ATA_SFF - bool "ATA SFF support" + bool "ATA SFF support (for legacy IDE and PATA)" default y help This option adds support for ATA controllers with SFF @@ -146,7 +210,7 @@ config PDC_ADMA config PATA_OCTEON_CF tristate "OCTEON Boot Bus Compact Flash support" - depends on CPU_CAVIUM_OCTEON + depends on CAVIUM_OCTEON_SOC help This option enables a polled compact flash driver for use with compact flash cards attached to the OCTEON boot bus. @@ -163,7 +227,7 @@ config SATA_QSTOR config SATA_SX4 tristate "Promise SATA SX4 support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for Promise Serial ATA SX4. @@ -214,8 +278,29 @@ config SATA_DWC_VDEBUG help This option enables the taskfile dumping and NCQ debugging. +config SATA_DWC_PMP + tristate "DesignWare Cores SATA with PMP support" + depends on 460EX + help + This option enables support for the on-chip SATA controller of the + AppliedMicro processor 460EX with PMP support. + + If unsure, say N. + +config SATA_HIGHBANK + tristate "Calxeda Highbank SATA support" + depends on ARCH_HIGHBANK || COMPILE_TEST + help + This option enables support for the Calxeda Highbank SoC's + onboard SATA. + + If unsure, say N. + config SATA_MV tristate "Marvell SATA support" + depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \ + ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST + select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, @@ -239,6 +324,14 @@ config SATA_PROMISE If unsure, say N. +config SATA_RCAR + tristate "Renesas R-Car SATA support" + depends on ARCH_SHMOBILE || COMPILE_TEST + help + This option enables support for Renesas R-Car Serial ATA. + + If unsure, say N. + config SATA_SIL tristate "Silicon Image SATA support" depends on PCI @@ -313,6 +406,8 @@ config PATA_AMD config PATA_ARASAN_CF tristate "ARASAN CompactFlash PATA Controller Support" + depends on ARCH_SPEAR13XX || COMPILE_TEST + depends on DMADEVICES select DMA_ENGINE help Say Y here to support the ARASAN CompactFlash PATA controller @@ -363,7 +458,7 @@ config PATA_CMD64X config PATA_CS5520 tristate "CS5510/5520 PATA support" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) help This option enables support for the Cyrix 5510/5520 companion chip used with the MediaGX/Geode processor family. @@ -372,7 +467,7 @@ config PATA_CS5520 config PATA_CS5530 tristate "CS5530 PATA support" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) help This option enables support for the Cyrix/NatSemi/AMD CS5530 companion chip used with the MediaGX/Geode processor family. @@ -381,7 +476,7 @@ config PATA_CS5530 config PATA_CS5535 tristate "CS5535 PATA support (Experimental)" - depends on PCI && X86 && !X86_64 && EXPERIMENTAL + depends on PCI && X86_32 help This option enables support for the NatSemi/AMD CS5535 companion chip used with the Geode processor family. @@ -390,7 +485,7 @@ config PATA_CS5535 config PATA_CS5536 tristate "CS5536 PATA support" - depends on PCI + depends on PCI && (X86_32 || MIPS || COMPILE_TEST) help This option enables support for the AMD CS5536 companion chip used with the Geode LX processor family. @@ -399,7 +494,7 @@ config PATA_CS5536 config PATA_CYPRESS tristate "Cypress CY82C693 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for the Cypress/Contaq CY82C693 chipset found in some Alpha systems @@ -415,6 +510,15 @@ config PATA_EFAR If unsure, say N. +config PATA_EP93XX + tristate "Cirrus Logic EP93xx PATA support" + depends on ARCH_EP93XX + help + This option enables support for the PATA controller in + the Cirrus Logic EP9312 and EP9315 ARM CPU. + + If unsure, say N. + config PATA_HPT366 tristate "HPT 366/368 PATA support" depends on PCI @@ -467,9 +571,18 @@ config PATA_ICSIDE interface card. This is not required for ICS partition support. If you are unsure, say N to this. +config PATA_IMX + tristate "PATA support for Freescale iMX" + depends on ARCH_MXC + help + This option enables support for the PATA host available on Freescale + iMX SoCs. + + If unsure, say N. + config PATA_IT8213 tristate "IT8213 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for the ITE 821 PATA controllers via the new ATA layer. @@ -562,7 +675,7 @@ config PATA_OLDPIIX config PATA_OPTIDMA tristate "OPTI FireStar PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables DMA/PIO support for the later OPTi controllers found on some old motherboards and in some @@ -589,7 +702,7 @@ config PATA_PDC_OLD config PATA_RADISYS tristate "RADISYS 82600 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for the RADISYS 82600 PATA controllers via the new ATA layer @@ -608,7 +721,7 @@ config PATA_RDC config PATA_SC1200 tristate "SC1200 PATA support" - depends on PCI + depends on PCI && (X86_32 || COMPILE_TEST) help This option enables support for the NatSemi/AMD SC1200 SoC companion chip used with the Geode processor family. @@ -660,7 +773,7 @@ config PATA_SIS config PATA_TOSHIBA tristate "Toshiba Piccolo support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help Support for the Toshiba Piccolo controllers. Currently only the primary channel is supported by this driver. @@ -711,7 +824,7 @@ comment "PIO-only SFF controllers" config PATA_AT32 tristate "Atmel AVR32 PATA support (Experimental)" - depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL + depends on AVR32 && PLATFORM_AT32AP help This option enables support for the IDE devices on the Atmel AT32AP platform. @@ -720,7 +833,7 @@ config PATA_AT32 config PATA_AT91 tristate "PATA support for AT91SAM9260" - depends on ARM && ARCH_AT91 + depends on ARM && SOC_AT91SAM9 help This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. @@ -728,7 +841,7 @@ config PATA_AT91 config PATA_CMD640_PCI tristate "CMD640 PCI PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables support for the CMD640 PCI IDE interface chip. Only the primary channel is currently @@ -774,7 +887,7 @@ config PATA_NS87410 config PATA_OPTI tristate "OPTI621/6215 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + depends on PCI help This option enables full PIO support for the early Opti ATA controllers found on some old motherboards. @@ -810,7 +923,7 @@ config PATA_PLATFORM config PATA_OF_PLATFORM tristate "OpenFirmware platform device PATA support" - depends on PATA_PLATFORM && PPC_OF + depends on PATA_PLATFORM && OF help This option enables support for generic directly connected ATA devices commonly found on embedded systems with OpenFirmware @@ -821,6 +934,7 @@ config PATA_OF_PLATFORM config PATA_QDI tristate "QDI VLB PATA support" depends on ISA + select PATA_LEGACY help Support for QDI 6500 and 6580 PATA controllers on VESA local bus. @@ -853,7 +967,7 @@ config PATA_SAMSUNG_CF config PATA_WINBOND_VLB tristate "Winbond W83759A VLB PATA support (Experimental)" - depends on ISA && EXPERIMENTAL + depends on ISA select PATA_LEGACY help Support for the Winbond W83759A controller on Vesa Local Bus @@ -881,7 +995,7 @@ config ATA_GENERIC config PATA_LEGACY tristate "Legacy ISA PATA support (Experimental)" - depends on (ISA || PCI) && EXPERIMENTAL + depends on (ISA || PCI) help This option enables support for ISA/VLB/PCI bus legacy PATA ports and allows them to be accessed via the new ATA layer. |