diff options
Diffstat (limited to 'drivers/acpi/sleep.c')
| -rw-r--r-- | drivers/acpi/sleep.c | 878 |
1 files changed, 433 insertions, 445 deletions
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 79d33d908b5..b3e3cc73ba7 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -16,25 +16,21 @@ #include <linux/device.h> #include <linux/suspend.h> #include <linux/reboot.h> - +#include <linux/acpi.h> +#include <linux/module.h> #include <asm/io.h> - -#include <acpi/acpi_bus.h> -#include <acpi/acpi_drivers.h> +#include <trace/events/power.h> #include "internal.h" #include "sleep.h" -u8 sleep_states[ACPI_S_STATE_COUNT]; +static u8 sleep_states[ACPI_S_STATE_COUNT]; static void acpi_sleep_tts_switch(u32 acpi_state) { - union acpi_object in_arg = { ACPI_TYPE_INTEGER }; - struct acpi_object_list arg_list = { 1, &in_arg }; - acpi_status status = AE_OK; + acpi_status status; - in_arg.integer.value = acpi_state; - status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL); + status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { /* * OS can't evaluate the _TTS object correctly. Some warning @@ -62,39 +58,69 @@ static int acpi_sleep_prepare(u32 acpi_state) #ifdef CONFIG_ACPI_SLEEP /* do we have a wakeup address for S2 and S3? */ if (acpi_state == ACPI_STATE_S3) { - if (!acpi_wakeup_address) { + if (!acpi_wakeup_address) return -EFAULT; - } - acpi_set_firmware_waking_vector( - (acpi_physical_address)acpi_wakeup_address); + acpi_set_firmware_waking_vector(acpi_wakeup_address); } ACPI_FLUSH_CPU_CACHE(); - acpi_enable_wakeup_device_prep(acpi_state); #endif printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n", acpi_state); + acpi_enable_wakeup_devices(acpi_state); acpi_enter_sleep_state_prep(acpi_state); return 0; } +static bool acpi_sleep_state_supported(u8 sleep_state) +{ + acpi_status status; + u8 type_a, type_b; + + status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b); + return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware + || (acpi_gbl_FADT.sleep_control.address + && acpi_gbl_FADT.sleep_status.address)); +} + #ifdef CONFIG_ACPI_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; + +u32 acpi_target_system_state(void) +{ + return acpi_target_sleep_state; +} +EXPORT_SYMBOL_GPL(acpi_target_system_state); + +static bool pwr_btn_event_pending; + +/* + * The ACPI specification wants us to save NVS memory regions during hibernation + * and to restore them during the subsequent resume. Windows does that also for + * suspend to RAM. However, it is known that this mechanism does not work on + * all machines, so we allow the user to disable it with the help of the + * 'acpi_sleep=nonvs' kernel command line option. + */ +static bool nvs_nosave; + +void __init acpi_nvs_nosave(void) +{ + nvs_nosave = true; +} + /* - * According to the ACPI specification the BIOS should make sure that ACPI is - * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, - * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI - * on such systems during resume. Unfortunately that doesn't help in - * particularly pathological cases in which SCI_EN has to be set directly on - * resume, although the specification states very clearly that this flag is - * owned by the hardware. The set_sci_en_on_resume variable will be set in such - * cases. + * The ACPI specification wants us to save NVS memory regions during hibernation + * but says nothing about saving NVS during S3. Not all versions of Windows + * save NVS on S3 suspend either, and it is clear that not all systems need + * NVS to be saved at S3 time. To improve suspend/resume time, allow the + * user to disable saving NVS on S3 if their system does not require it, but + * continue to save/restore NVS for S4 as specified. */ -static bool set_sci_en_on_resume; +static bool nvs_nosave_s3; -void __init acpi_set_sci_en_on_resume(void) +void __init acpi_nvs_nosave_s3(void) { - set_sci_en_on_resume = true; + nvs_nosave_s3 = true; } /* @@ -109,16 +135,217 @@ void __init acpi_old_suspend_ordering(void) old_suspend_ordering = true; } +static int __init init_old_suspend_ordering(const struct dmi_system_id *d) +{ + acpi_old_suspend_ordering(); + return 0; +} + +static int __init init_nvs_nosave(const struct dmi_system_id *d) +{ + acpi_nvs_nosave(); + return 0; +} + +static struct dmi_system_id acpisleep_dmi_table[] __initdata = { + { + .callback = init_old_suspend_ordering, + .ident = "Abit KN9 (nForce4 variant)", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"), + DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"), + }, + }, + { + .callback = init_old_suspend_ordering, + .ident = "HP xw4600 Workstation", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), + }, + }, + { + .callback = init_old_suspend_ordering, + .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "M2N8L"), + }, + }, + { + .callback = init_old_suspend_ordering, + .ident = "Panasonic CF51-2L", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "Matsushita Electric Industrial Co.,Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VGN-FW41E_H", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VGN-FW21E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VGN-FW21M", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VPCEB17FX", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VGN-SR11M", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Everex StepNote Series", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VPCEB1Z1E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VGN-NW130D", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VPCCW29FX", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Averatec AV1020-ED2", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"), + DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"), + }, + }, + { + .callback = init_old_suspend_ordering, + .ident = "Asus A8N-SLI DELUXE", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"), + }, + }, + { + .callback = init_old_suspend_ordering, + .ident = "Asus A8N-SLI Premium", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VGN-SR26GN_P", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VPCEB1S1E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VGN-FW520F", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Asus K54C", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "K54C"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Asus K54HR", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"), + }, + }, + {}, +}; + +static void acpi_sleep_dmi_check(void) +{ + dmi_check_system(acpisleep_dmi_table); +} + /** - * acpi_pm_disable_gpes - Disable the GPEs. + * acpi_pm_freeze - Disable the GPEs and suspend EC transactions. */ -static int acpi_pm_disable_gpes(void) +static int acpi_pm_freeze(void) { acpi_disable_all_gpes(); + acpi_os_wait_events_complete(); + acpi_ec_block_transactions(); return 0; } /** + * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS. + */ +static int acpi_pm_pre_suspend(void) +{ + acpi_pm_freeze(); + return suspend_nvs_save(); +} + +/** * __acpi_pm_prepare - Prepare the platform to enter the target state. * * If necessary, set the firmware waking vector and do arch-specific @@ -127,9 +354,9 @@ static int acpi_pm_disable_gpes(void) static int __acpi_pm_prepare(void) { int error = acpi_sleep_prepare(acpi_target_sleep_state); - if (error) acpi_target_sleep_state = ACPI_STATE_S0; + return error; } @@ -140,12 +367,20 @@ static int __acpi_pm_prepare(void) static int acpi_pm_prepare(void) { int error = __acpi_pm_prepare(); - if (!error) - acpi_disable_all_gpes(); + error = acpi_pm_pre_suspend(); + return error; } +static int find_powerf_dev(struct device *dev, void *data) +{ + struct acpi_device *device = to_acpi_device(dev); + const char *hid = acpi_device_hid(device); + + return !strcmp(hid, ACPI_BUTTON_HID_POWERF); +} + /** * acpi_pm_finish - Instruct the platform to leave a sleep state. * @@ -154,27 +389,61 @@ static int acpi_pm_prepare(void) */ static void acpi_pm_finish(void) { + struct device *pwr_btn_dev; u32 acpi_state = acpi_target_sleep_state; + acpi_ec_unblock_transactions(); + suspend_nvs_free(); + if (acpi_state == ACPI_STATE_S0) return; printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", acpi_state); - acpi_disable_wakeup_device(acpi_state); + acpi_disable_wakeup_devices(acpi_state); acpi_leave_sleep_state(acpi_state); /* reset firmware waking vector */ acpi_set_firmware_waking_vector((acpi_physical_address) 0); acpi_target_sleep_state = ACPI_STATE_S0; + + acpi_resume_power_resources(); + + /* If we were woken with the fixed power button, provide a small + * hint to userspace in the form of a wakeup event on the fixed power + * button device (if it can be found). + * + * We delay the event generation til now, as the PM layer requires + * timekeeping to be running before we generate events. */ + if (!pwr_btn_event_pending) + return; + + pwr_btn_event_pending = false; + pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL, + find_powerf_dev); + if (pwr_btn_dev) { + pm_wakeup_event(pwr_btn_dev, 0); + put_device(pwr_btn_dev); + } +} + +/** + * acpi_pm_start - Start system PM transition. + */ +static void acpi_pm_start(u32 acpi_state) +{ + acpi_target_sleep_state = acpi_state; + acpi_sleep_tts_switch(acpi_target_sleep_state); + acpi_scan_lock_acquire(); } /** - * acpi_pm_end - Finish up suspend sequence. + * acpi_pm_end - Finish up system PM transition. */ static void acpi_pm_end(void) { + acpi_scan_lock_release(); /* * This is necessary in case acpi_pm_finish() is not called during a * failing transition to a sleep state. @@ -184,11 +453,10 @@ static void acpi_pm_end(void) } #else /* !CONFIG_ACPI_SLEEP */ #define acpi_target_sleep_state ACPI_STATE_S0 +static inline void acpi_sleep_dmi_check(void) {} #endif /* CONFIG_ACPI_SLEEP */ #ifdef CONFIG_SUSPEND -extern void do_suspend_lowlevel(void); - static u32 acpi_suspend_states[] = { [PM_SUSPEND_ON] = ACPI_STATE_S0, [PM_SUSPEND_STANDBY] = ACPI_STATE_S1, @@ -203,17 +471,19 @@ static u32 acpi_suspend_states[] = { static int acpi_suspend_begin(suspend_state_t pm_state) { u32 acpi_state = acpi_suspend_states[pm_state]; - int error = 0; - - if (sleep_states[acpi_state]) { - acpi_target_sleep_state = acpi_state; - acpi_sleep_tts_switch(acpi_target_sleep_state); - } else { - printk(KERN_ERR "ACPI does not support this state: %d\n", - pm_state); - error = -ENOSYS; + int error; + + error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc(); + if (error) + return error; + + if (!sleep_states[acpi_state]) { + pr_err("ACPI does not support sleep state S%u\n", acpi_state); + return -ENOSYS; } - return error; + + acpi_pm_start(acpi_state); + return 0; } /** @@ -227,21 +497,12 @@ static int acpi_suspend_begin(suspend_state_t pm_state) static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; - unsigned long flags = 0; u32 acpi_state = acpi_target_sleep_state; + int error; ACPI_FLUSH_CPU_CACHE(); - /* Do arch specific saving of state. */ - if (acpi_state == ACPI_STATE_S3) { - int error = acpi_save_state_mem(); - - if (error) - return error; - } - - local_irq_save(flags); - acpi_enable_wakeup_device(acpi_state); + trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true); switch (acpi_state) { case ACPI_STATE_S1: barrier(); @@ -249,25 +510,42 @@ static int acpi_suspend_enter(suspend_state_t pm_state) break; case ACPI_STATE_S3: - do_suspend_lowlevel(); + if (!acpi_suspend_lowlevel) + return -ENOSYS; + error = acpi_suspend_lowlevel(); + if (error) + return error; + pr_info(PREFIX "Low-level resume complete\n"); break; } + trace_suspend_resume(TPS("acpi_suspend"), acpi_state, false); - /* If ACPI is not enabled by the BIOS, we need to enable it here. */ - if (set_sci_en_on_resume) - acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); - else - acpi_enable(); + /* This violates the spec but is required for bug compatibility. */ + acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); - /* Reprogram control registers and execute _BFS */ + /* Reprogram control registers */ acpi_leave_sleep_state_prep(acpi_state); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the * POWER_BUTTON event should not reach userspace ] + * + * However, we do generate a small hint for userspace in the form of + * a wakeup event. We flag this condition for now and generate the + * event later, as we're currently too early in resume to be able to + * generate wakeup events. */ - if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) - acpi_clear_event(ACPI_EVENT_POWER_BUTTON); + if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) { + acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED; + + acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status); + + if (pwr_btn_status & ACPI_EVENT_FLAG_SET) { + acpi_clear_event(ACPI_EVENT_POWER_BUTTON); + /* Flag for later */ + pwr_btn_event_pending = true; + } + } /* * Disable and clear GPE status before interrupt is enabled. Some GPEs @@ -275,13 +553,10 @@ static int acpi_suspend_enter(suspend_state_t pm_state) * acpi_leave_sleep_state will reenable specific GPEs later */ acpi_disable_all_gpes(); + /* Allow EC transactions to happen. */ + acpi_ec_unblock_transactions_early(); - local_irq_restore(flags); - printk(KERN_DEBUG "Back to C!\n"); - - /* restore processor state */ - if (acpi_state == ACPI_STATE_S3) - acpi_restore_state_mem(); + suspend_nvs_restore(); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } @@ -302,7 +577,7 @@ static int acpi_suspend_state_valid(suspend_state_t pm_state) } } -static struct platform_suspend_ops acpi_suspend_ops = { +static const struct platform_suspend_ops acpi_suspend_ops = { .valid = acpi_suspend_state_valid, .begin = acpi_suspend_begin, .prepare_late = acpi_pm_prepare, @@ -320,9 +595,9 @@ static struct platform_suspend_ops acpi_suspend_ops = { static int acpi_suspend_begin_old(suspend_state_t pm_state) { int error = acpi_suspend_begin(pm_state); - if (!error) error = __acpi_pm_prepare(); + return error; } @@ -330,153 +605,50 @@ static int acpi_suspend_begin_old(suspend_state_t pm_state) * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has * been requested. */ -static struct platform_suspend_ops acpi_suspend_ops_old = { +static const struct platform_suspend_ops acpi_suspend_ops_old = { .valid = acpi_suspend_state_valid, .begin = acpi_suspend_begin_old, - .prepare_late = acpi_pm_disable_gpes, + .prepare_late = acpi_pm_pre_suspend, .enter = acpi_suspend_enter, .wake = acpi_pm_finish, .end = acpi_pm_end, .recover = acpi_pm_finish, }; -static int __init init_old_suspend_ordering(const struct dmi_system_id *d) +static int acpi_freeze_begin(void) { - old_suspend_ordering = true; + acpi_scan_lock_acquire(); return 0; } -static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d) +static void acpi_freeze_end(void) { - set_sci_en_on_resume = true; - return 0; + acpi_scan_lock_release(); } -static struct dmi_system_id __initdata acpisleep_dmi_table[] = { - { - .callback = init_old_suspend_ordering, - .ident = "Abit KN9 (nForce4 variant)", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"), - DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"), - }, - }, - { - .callback = init_old_suspend_ordering, - .ident = "HP xw4600 Workstation", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Apple MacBook 1,1", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Apple MacMini 1,1", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), - }, - }, - { - .callback = init_old_suspend_ordering, - .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "M2N8L"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Toshiba Satellite L300", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L300"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard HP G7000 Notebook PC", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard HP Pavilion dv3 Notebook PC", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv3 Notebook PC"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard Pavilion dv4", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard Pavilion dv7", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard Compaq Presario C700 Notebook PC", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario C700 Notebook PC"), - }, - }, - { - .callback = init_set_sci_en_on_resume, - .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"), - }, - }, - { - .callback = init_old_suspend_ordering, - .ident = "Panasonic CF51-2L", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, - "Matsushita Electric Industrial Co.,Ltd."), - DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"), - }, - }, - {}, +static const struct platform_freeze_ops acpi_freeze_ops = { + .begin = acpi_freeze_begin, + .end = acpi_freeze_end, }; -#endif /* CONFIG_SUSPEND */ - -#ifdef CONFIG_HIBERNATION -/* - * The ACPI specification wants us to save NVS memory regions during hibernation - * and to restore them during the subsequent resume. However, it is not certain - * if this mechanism is going to work on all machines, so we allow the user to - * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line - * option. - */ -static bool s4_no_nvs; -void __init acpi_s4_no_nvs(void) +static void acpi_sleep_suspend_setup(void) { - s4_no_nvs = true; + int i; + + for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) + if (acpi_sleep_state_supported(i)) + sleep_states[i] = 1; + + suspend_set_ops(old_suspend_ordering ? + &acpi_suspend_ops_old : &acpi_suspend_ops); + freeze_set_ops(&acpi_freeze_ops); } +#else /* !CONFIG_SUSPEND */ +static inline void acpi_sleep_suspend_setup(void) {} +#endif /* !CONFIG_SUSPEND */ + +#ifdef CONFIG_HIBERNATION static unsigned long s4_hardware_signature; static struct acpi_table_facs *facs; static bool nosigcheck; @@ -490,21 +662,9 @@ static int acpi_hibernation_begin(void) { int error; - error = s4_no_nvs ? 0 : hibernate_nvs_alloc(); - if (!error) { - acpi_target_sleep_state = ACPI_STATE_S4; - acpi_sleep_tts_switch(acpi_target_sleep_state); - } - - return error; -} - -static int acpi_hibernation_pre_snapshot(void) -{ - int error = acpi_pm_prepare(); - + error = nvs_nosave ? 0 : suspend_nvs_alloc(); if (!error) - hibernate_nvs_save(); + acpi_pm_start(ACPI_STATE_S4); return error; } @@ -512,27 +672,17 @@ static int acpi_hibernation_pre_snapshot(void) static int acpi_hibernation_enter(void) { acpi_status status = AE_OK; - unsigned long flags = 0; ACPI_FLUSH_CPU_CACHE(); - local_irq_save(flags); - acpi_enable_wakeup_device(ACPI_STATE_S4); /* This shouldn't return. If it returns, we have a problem */ status = acpi_enter_sleep_state(ACPI_STATE_S4); - /* Reprogram control registers and execute _BFS */ + /* Reprogram control registers */ acpi_leave_sleep_state_prep(ACPI_STATE_S4); - local_irq_restore(flags); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } -static void acpi_hibernation_finish(void) -{ - hibernate_nvs_free(); - acpi_pm_finish(); -} - static void acpi_hibernation_leave(void) { /* @@ -540,33 +690,33 @@ static void acpi_hibernation_leave(void) * enable it here. */ acpi_enable(); - /* Reprogram control registers and execute _BFS */ + /* Reprogram control registers */ acpi_leave_sleep_state_prep(ACPI_STATE_S4); /* Check the hardware signature */ - if (facs && s4_hardware_signature != facs->hardware_signature) { - printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " - "cannot resume!\n"); - panic("ACPI S4 hardware signature mismatch"); - } + if (facs && s4_hardware_signature != facs->hardware_signature) + pr_crit("ACPI: Hardware changed while hibernated, success doubtful!\n"); /* Restore the NVS memory area */ - hibernate_nvs_restore(); + suspend_nvs_restore(); + /* Allow EC transactions to happen. */ + acpi_ec_unblock_transactions_early(); } -static void acpi_pm_enable_gpes(void) +static void acpi_pm_thaw(void) { + acpi_ec_unblock_transactions(); acpi_enable_all_runtime_gpes(); } -static struct platform_hibernation_ops acpi_hibernation_ops = { +static const struct platform_hibernation_ops acpi_hibernation_ops = { .begin = acpi_hibernation_begin, .end = acpi_pm_end, - .pre_snapshot = acpi_hibernation_pre_snapshot, - .finish = acpi_hibernation_finish, + .pre_snapshot = acpi_pm_prepare, + .finish = acpi_pm_finish, .prepare = acpi_pm_prepare, .enter = acpi_hibernation_enter, .leave = acpi_hibernation_leave, - .pre_restore = acpi_pm_disable_gpes, - .restore_cleanup = acpi_pm_enable_gpes, + .pre_restore = acpi_pm_freeze, + .restore_cleanup = acpi_pm_thaw, }; /** @@ -588,41 +738,51 @@ static int acpi_hibernation_begin_old(void) error = acpi_sleep_prepare(ACPI_STATE_S4); if (!error) { - if (!s4_no_nvs) - error = hibernate_nvs_alloc(); - if (!error) + if (!nvs_nosave) + error = suspend_nvs_alloc(); + if (!error) { acpi_target_sleep_state = ACPI_STATE_S4; + acpi_scan_lock_acquire(); + } } return error; } -static int acpi_hibernation_pre_snapshot_old(void) -{ - int error = acpi_pm_disable_gpes(); - - if (!error) - hibernate_nvs_save(); - - return error; -} - /* * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has * been requested. */ -static struct platform_hibernation_ops acpi_hibernation_ops_old = { +static const struct platform_hibernation_ops acpi_hibernation_ops_old = { .begin = acpi_hibernation_begin_old, .end = acpi_pm_end, - .pre_snapshot = acpi_hibernation_pre_snapshot_old, - .finish = acpi_hibernation_finish, - .prepare = acpi_pm_disable_gpes, + .pre_snapshot = acpi_pm_pre_suspend, + .prepare = acpi_pm_freeze, + .finish = acpi_pm_finish, .enter = acpi_hibernation_enter, .leave = acpi_hibernation_leave, - .pre_restore = acpi_pm_disable_gpes, - .restore_cleanup = acpi_pm_enable_gpes, + .pre_restore = acpi_pm_freeze, + .restore_cleanup = acpi_pm_thaw, .recover = acpi_pm_finish, }; -#endif /* CONFIG_HIBERNATION */ + +static void acpi_sleep_hibernate_setup(void) +{ + if (!acpi_sleep_state_supported(ACPI_STATE_S4)) + return; + + hibernation_set_ops(old_suspend_ordering ? + &acpi_hibernation_ops_old : &acpi_hibernation_ops); + sleep_states[ACPI_STATE_S4] = 1; + if (nosigcheck) + return; + + acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs); + if (facs) + s4_hardware_signature = facs->hardware_signature; +} +#else /* !CONFIG_HIBERNATION */ +static inline void acpi_sleep_hibernate_setup(void) {} +#endif /* !CONFIG_HIBERNATION */ int acpi_suspend(u32 acpi_state) { @@ -639,123 +799,6 @@ int acpi_suspend(u32 acpi_state) return -EINVAL; } -#ifdef CONFIG_PM_SLEEP -/** - * acpi_pm_device_sleep_state - return preferred power state of ACPI device - * in the system sleep state given by %acpi_target_sleep_state - * @dev: device to examine; its driver model wakeup flags control - * whether it should be able to wake up the system - * @d_min_p: used to store the upper limit of allowed states range - * Return value: preferred power state of the device on success, -ENODEV on - * failure (ie. if there's no 'struct acpi_device' for @dev) - * - * Find the lowest power (highest number) ACPI device power state that - * device @dev can be in while the system is in the sleep state represented - * by %acpi_target_sleep_state. If @wake is nonzero, the device should be - * able to wake up the system from this sleep state. If @d_min_p is set, - * the highest power (lowest number) device power state of @dev allowed - * in this system sleep state is stored at the location pointed to by it. - * - * The caller must ensure that @dev is valid before using this function. - * The caller is also responsible for figuring out if the device is - * supposed to be able to wake up the system and passing this information - * via @wake. - */ - -int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) -{ - acpi_handle handle = DEVICE_ACPI_HANDLE(dev); - struct acpi_device *adev; - char acpi_method[] = "_SxD"; - unsigned long long d_min, d_max; - - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { - printk(KERN_DEBUG "ACPI handle has no context!\n"); - return -ENODEV; - } - - acpi_method[2] = '0' + acpi_target_sleep_state; - /* - * If the sleep state is S0, we will return D3, but if the device has - * _S0W, we will use the value from _S0W - */ - d_min = ACPI_STATE_D0; - d_max = ACPI_STATE_D3; - - /* - * If present, _SxD methods return the minimum D-state (highest power - * state) we can use for the corresponding S-states. Otherwise, the - * minimum D-state is D0 (ACPI 3.x). - * - * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer - * provided -- that's our fault recovery, we ignore retval. - */ - if (acpi_target_sleep_state > ACPI_STATE_S0) - acpi_evaluate_integer(handle, acpi_method, NULL, &d_min); - - /* - * If _PRW says we can wake up the system from the target sleep state, - * the D-state returned by _SxD is sufficient for that (we assume a - * wakeup-aware driver if wake is set). Still, if _SxW exists - * (ACPI 3.x), it should return the maximum (lowest power) D-state that - * can wake the system. _S0W may be valid, too. - */ - if (acpi_target_sleep_state == ACPI_STATE_S0 || - (device_may_wakeup(dev) && adev->wakeup.state.enabled && - adev->wakeup.sleep_state <= acpi_target_sleep_state)) { - acpi_status status; - - acpi_method[3] = 'W'; - status = acpi_evaluate_integer(handle, acpi_method, NULL, - &d_max); - if (ACPI_FAILURE(status)) { - d_max = d_min; - } else if (d_max < d_min) { - /* Warn the user of the broken DSDT */ - printk(KERN_WARNING "ACPI: Wrong value from %s\n", - acpi_method); - /* Sanitize it */ - d_min = d_max; - } - } - - if (d_min_p) - *d_min_p = d_min; - return d_max; -} - -/** - * acpi_pm_device_sleep_wake - enable or disable the system wake-up - * capability of given device - * @dev: device to handle - * @enable: 'true' - enable, 'false' - disable the wake-up capability - */ -int acpi_pm_device_sleep_wake(struct device *dev, bool enable) -{ - acpi_handle handle; - struct acpi_device *adev; - int error; - - if (!device_can_wakeup(dev)) - return -EINVAL; - - handle = DEVICE_ACPI_HANDLE(dev); - if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { - dev_dbg(dev, "ACPI handle has no context in %s!\n", __func__); - return -ENODEV; - } - - error = enable ? - acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) : - acpi_disable_wakeup_device_power(adev); - if (!error) - dev_info(dev, "wake-up capability %s by ACPI\n", - enable ? "enabled" : "disabled"); - - return error; -} -#endif - static void acpi_power_off_prepare(void) { /* Prepare to power off the system */ @@ -768,94 +811,39 @@ static void acpi_power_off(void) /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enable_wakeup_device(ACPI_STATE_S5); acpi_enter_sleep_state(ACPI_STATE_S5); } -/* - * ACPI 2.0 created the optional _GTS and _BFS, - * but industry adoption has been neither rapid nor broad. - * - * Linux gets into trouble when it executes poorly validated - * paths through the BIOS, so disable _GTS and _BFS by default, - * but do speak up and offer the option to enable them. - */ -void __init acpi_gts_bfs_check(void) -{ - acpi_handle dummy; - - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy))) - { - printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n"); - printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, " - "please notify linux-acpi@vger.kernel.org\n"); - } - if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy))) - { - printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n"); - printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, " - "please notify linux-acpi@vger.kernel.org\n"); - } -} - int __init acpi_sleep_init(void) { - acpi_status status; - u8 type_a, type_b; -#ifdef CONFIG_SUSPEND - int i = 0; - - dmi_check_system(acpisleep_dmi_table); -#endif + char supported[ACPI_S_STATE_COUNT * 3 + 1]; + char *pos = supported; + int i; - if (acpi_disabled) - return 0; + acpi_sleep_dmi_check(); sleep_states[ACPI_STATE_S0] = 1; - printk(KERN_INFO PREFIX "(supports S0"); - -#ifdef CONFIG_SUSPEND - for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) { - status = acpi_get_sleep_type_data(i, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { - sleep_states[i] = 1; - printk(" S%d", i); - } - } - suspend_set_ops(old_suspend_ordering ? - &acpi_suspend_ops_old : &acpi_suspend_ops); -#endif + acpi_sleep_suspend_setup(); + acpi_sleep_hibernate_setup(); -#ifdef CONFIG_HIBERNATION - status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { - hibernation_set_ops(old_suspend_ordering ? - &acpi_hibernation_ops_old : &acpi_hibernation_ops); - sleep_states[ACPI_STATE_S4] = 1; - printk(" S4"); - if (!nosigcheck) { - acpi_get_table(ACPI_SIG_FACS, 1, - (struct acpi_table_header **)&facs); - if (facs) - s4_hardware_signature = - facs->hardware_signature; - } - } -#endif - status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b); - if (ACPI_SUCCESS(status)) { + if (acpi_sleep_state_supported(ACPI_STATE_S5)) { sleep_states[ACPI_STATE_S5] = 1; - printk(" S5"); pm_power_off_prepare = acpi_power_off_prepare; pm_power_off = acpi_power_off; } - printk(")\n"); + + supported[0] = 0; + for (i = 0; i < ACPI_S_STATE_COUNT; i++) { + if (sleep_states[i]) + pos += sprintf(pos, " S%d", i); + } + pr_info(PREFIX "(supports%s)\n", supported); + /* * Register the tts_notifier to reboot notifier list so that the _TTS * object can also be evaluated when the system enters S5. */ register_reboot_notifier(&tts_notifier); - acpi_gts_bfs_check(); return 0; } |