diff options
Diffstat (limited to 'drivers/acpi/resources/rsio.c')
| -rw-r--r-- | drivers/acpi/resources/rsio.c | 476 |
1 files changed, 0 insertions, 476 deletions
diff --git a/drivers/acpi/resources/rsio.c b/drivers/acpi/resources/rsio.c deleted file mode 100644 index d53bbe89e85..00000000000 --- a/drivers/acpi/resources/rsio.c +++ /dev/null @@ -1,476 +0,0 @@ -/******************************************************************************* - * - * Module Name: rsio - IO and DMA resource descriptors - * - ******************************************************************************/ - -/* - * Copyright (C) 2000 - 2005, R. Byron Moore - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#include <acpi/acpi.h> -#include <acpi/acresrc.h> - -#define _COMPONENT ACPI_RESOURCES -ACPI_MODULE_NAME("rsio") - -/******************************************************************************* - * - * FUNCTION: acpi_rs_io_resource - * - * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte - * stream - * bytes_consumed - Pointer to where the number of bytes - * consumed the byte_stream_buffer is - * returned - * output_buffer - Pointer to the return data buffer - * structure_size - Pointer to where the number of bytes - * in the return data struct is returned - * - * RETURN: Status - * - * DESCRIPTION: Take the resource byte stream and fill out the appropriate - * structure pointed to by the output_buffer. Return the - * number of bytes consumed from the byte stream. - * - ******************************************************************************/ -acpi_status -acpi_rs_io_resource(u8 * byte_stream_buffer, - acpi_size * bytes_consumed, - u8 ** output_buffer, acpi_size * structure_size) -{ - u8 *buffer = byte_stream_buffer; - struct acpi_resource *output_struct = (void *)*output_buffer; - u16 temp16 = 0; - u8 temp8 = 0; - acpi_size struct_size = ACPI_SIZEOF_RESOURCE(struct acpi_resource_io); - - ACPI_FUNCTION_TRACE("rs_io_resource"); - - /* The number of bytes consumed are Constant */ - - *bytes_consumed = 8; - - output_struct->id = ACPI_RSTYPE_IO; - - /* Check Decode */ - - buffer += 1; - temp8 = *buffer; - - output_struct->data.io.io_decode = temp8 & 0x01; - - /* Check min_base Address */ - - buffer += 1; - ACPI_MOVE_16_TO_16(&temp16, buffer); - - output_struct->data.io.min_base_address = temp16; - - /* Check max_base Address */ - - buffer += 2; - ACPI_MOVE_16_TO_16(&temp16, buffer); - - output_struct->data.io.max_base_address = temp16; - - /* Check Base alignment */ - - buffer += 2; - temp8 = *buffer; - - output_struct->data.io.alignment = temp8; - - /* Check range_length */ - - buffer += 1; - temp8 = *buffer; - - output_struct->data.io.range_length = temp8; - - /* Set the Length parameter */ - - output_struct->length = (u32) struct_size; - - /* Return the final size of the structure */ - - *structure_size = struct_size; - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_rs_fixed_io_resource - * - * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte - * stream - * bytes_consumed - Pointer to where the number of bytes - * consumed the byte_stream_buffer is - * returned - * output_buffer - Pointer to the return data buffer - * structure_size - Pointer to where the number of bytes - * in the return data struct is returned - * - * RETURN: Status - * - * DESCRIPTION: Take the resource byte stream and fill out the appropriate - * structure pointed to by the output_buffer. Return the - * number of bytes consumed from the byte stream. - * - ******************************************************************************/ - -acpi_status -acpi_rs_fixed_io_resource(u8 * byte_stream_buffer, - acpi_size * bytes_consumed, - u8 ** output_buffer, acpi_size * structure_size) -{ - u8 *buffer = byte_stream_buffer; - struct acpi_resource *output_struct = (void *)*output_buffer; - u16 temp16 = 0; - u8 temp8 = 0; - acpi_size struct_size = - ACPI_SIZEOF_RESOURCE(struct acpi_resource_fixed_io); - - ACPI_FUNCTION_TRACE("rs_fixed_io_resource"); - - /* The number of bytes consumed are Constant */ - - *bytes_consumed = 4; - - output_struct->id = ACPI_RSTYPE_FIXED_IO; - - /* Check Range Base Address */ - - buffer += 1; - ACPI_MOVE_16_TO_16(&temp16, buffer); - - output_struct->data.fixed_io.base_address = temp16; - - /* Check range_length */ - - buffer += 2; - temp8 = *buffer; - - output_struct->data.fixed_io.range_length = temp8; - - /* Set the Length parameter */ - - output_struct->length = (u32) struct_size; - - /* Return the final size of the structure */ - - *structure_size = struct_size; - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_rs_io_stream - * - * PARAMETERS: linked_list - Pointer to the resource linked list - * output_buffer - Pointer to the user's return buffer - * bytes_consumed - Pointer to where the number of bytes - * used in the output_buffer is returned - * - * RETURN: Status - * - * DESCRIPTION: Take the linked list resource structure and fills in the - * the appropriate bytes in a byte stream - * - ******************************************************************************/ - -acpi_status -acpi_rs_io_stream(struct acpi_resource *linked_list, - u8 ** output_buffer, acpi_size * bytes_consumed) -{ - u8 *buffer = *output_buffer; - u16 temp16 = 0; - u8 temp8 = 0; - - ACPI_FUNCTION_TRACE("rs_io_stream"); - - /* The descriptor field is static */ - - *buffer = 0x47; - buffer += 1; - - /* Io Information Byte */ - - temp8 = (u8) (linked_list->data.io.io_decode & 0x01); - - *buffer = temp8; - buffer += 1; - - /* Set the Range minimum base address */ - - temp16 = (u16) linked_list->data.io.min_base_address; - - ACPI_MOVE_16_TO_16(buffer, &temp16); - buffer += 2; - - /* Set the Range maximum base address */ - - temp16 = (u16) linked_list->data.io.max_base_address; - - ACPI_MOVE_16_TO_16(buffer, &temp16); - buffer += 2; - - /* Set the base alignment */ - - temp8 = (u8) linked_list->data.io.alignment; - - *buffer = temp8; - buffer += 1; - - /* Set the range length */ - - temp8 = (u8) linked_list->data.io.range_length; - - *buffer = temp8; - buffer += 1; - - /* Return the number of bytes consumed in this operation */ - - *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer); - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_rs_fixed_io_stream - * - * PARAMETERS: linked_list - Pointer to the resource linked list - * output_buffer - Pointer to the user's return buffer - * bytes_consumed - Pointer to where the number of bytes - * used in the output_buffer is returned - * - * RETURN: Status - * - * DESCRIPTION: Take the linked list resource structure and fills in the - * the appropriate bytes in a byte stream - * - ******************************************************************************/ - -acpi_status -acpi_rs_fixed_io_stream(struct acpi_resource *linked_list, - u8 ** output_buffer, acpi_size * bytes_consumed) -{ - u8 *buffer = *output_buffer; - u16 temp16 = 0; - u8 temp8 = 0; - - ACPI_FUNCTION_TRACE("rs_fixed_io_stream"); - - /* The descriptor field is static */ - - *buffer = 0x4B; - - buffer += 1; - - /* Set the Range base address */ - - temp16 = (u16) linked_list->data.fixed_io.base_address; - - ACPI_MOVE_16_TO_16(buffer, &temp16); - buffer += 2; - - /* Set the range length */ - - temp8 = (u8) linked_list->data.fixed_io.range_length; - - *buffer = temp8; - buffer += 1; - - /* Return the number of bytes consumed in this operation */ - - *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer); - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_rs_dma_resource - * - * PARAMETERS: byte_stream_buffer - Pointer to the resource input byte - * stream - * bytes_consumed - Pointer to where the number of bytes - * consumed the byte_stream_buffer is - * returned - * output_buffer - Pointer to the return data buffer - * structure_size - Pointer to where the number of bytes - * in the return data struct is returned - * - * RETURN: Status - * - * DESCRIPTION: Take the resource byte stream and fill out the appropriate - * structure pointed to by the output_buffer. Return the - * number of bytes consumed from the byte stream. - * - ******************************************************************************/ - -acpi_status -acpi_rs_dma_resource(u8 * byte_stream_buffer, - acpi_size * bytes_consumed, - u8 ** output_buffer, acpi_size * structure_size) -{ - u8 *buffer = byte_stream_buffer; - struct acpi_resource *output_struct = (void *)*output_buffer; - u8 temp8 = 0; - u8 index; - u8 i; - acpi_size struct_size = ACPI_SIZEOF_RESOURCE(struct acpi_resource_dma); - - ACPI_FUNCTION_TRACE("rs_dma_resource"); - - /* The number of bytes consumed are Constant */ - - *bytes_consumed = 3; - output_struct->id = ACPI_RSTYPE_DMA; - - /* Point to the 8-bits of Byte 1 */ - - buffer += 1; - temp8 = *buffer; - - /* Decode the DMA channel bits */ - - for (i = 0, index = 0; index < 8; index++) { - if ((temp8 >> index) & 0x01) { - output_struct->data.dma.channels[i] = index; - i++; - } - } - - /* Zero DMA channels is valid */ - - output_struct->data.dma.number_of_channels = i; - if (i > 0) { - /* Calculate the structure size based upon the number of interrupts */ - - struct_size += ((acpi_size) i - 1) * 4; - } - - /* Point to Byte 2 */ - - buffer += 1; - temp8 = *buffer; - - /* Check for transfer preference (Bits[1:0]) */ - - output_struct->data.dma.transfer = temp8 & 0x03; - - if (0x03 == output_struct->data.dma.transfer) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Invalid DMA.Transfer preference (3)\n")); - return_ACPI_STATUS(AE_BAD_DATA); - } - - /* Get bus master preference (Bit[2]) */ - - output_struct->data.dma.bus_master = (temp8 >> 2) & 0x01; - - /* Get channel speed support (Bits[6:5]) */ - - output_struct->data.dma.type = (temp8 >> 5) & 0x03; - - /* Set the Length parameter */ - - output_struct->length = (u32) struct_size; - - /* Return the final size of the structure */ - - *structure_size = struct_size; - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_rs_dma_stream - * - * PARAMETERS: linked_list - Pointer to the resource linked list - * output_buffer - Pointer to the user's return buffer - * bytes_consumed - Pointer to where the number of bytes - * used in the output_buffer is returned - * - * RETURN: Status - * - * DESCRIPTION: Take the linked list resource structure and fills in the - * the appropriate bytes in a byte stream - * - ******************************************************************************/ - -acpi_status -acpi_rs_dma_stream(struct acpi_resource *linked_list, - u8 ** output_buffer, acpi_size * bytes_consumed) -{ - u8 *buffer = *output_buffer; - u16 temp16 = 0; - u8 temp8 = 0; - u8 index; - - ACPI_FUNCTION_TRACE("rs_dma_stream"); - - /* The descriptor field is static */ - - *buffer = 0x2A; - buffer += 1; - temp8 = 0; - - /* Loop through all of the Channels and set the mask bits */ - - for (index = 0; - index < linked_list->data.dma.number_of_channels; index++) { - temp16 = (u16) linked_list->data.dma.channels[index]; - temp8 |= 0x1 << temp16; - } - - *buffer = temp8; - buffer += 1; - - /* Set the DMA Info */ - - temp8 = (u8) ((linked_list->data.dma.type & 0x03) << 5); - temp8 |= ((linked_list->data.dma.bus_master & 0x01) << 2); - temp8 |= (linked_list->data.dma.transfer & 0x03); - - *buffer = temp8; - buffer += 1; - - /* Return the number of bytes consumed in this operation */ - - *bytes_consumed = ACPI_PTR_DIFF(buffer, *output_buffer); - return_ACPI_STATUS(AE_OK); -} |