diff options
Diffstat (limited to 'drivers/acpi/hardware/hwsleep.c')
| -rw-r--r-- | drivers/acpi/hardware/hwsleep.c | 590 |
1 files changed, 0 insertions, 590 deletions
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c deleted file mode 100644 index 34519069050..00000000000 --- a/drivers/acpi/hardware/hwsleep.c +++ /dev/null @@ -1,590 +0,0 @@ - -/****************************************************************************** - * - * Name: hwsleep.c - ACPI Hardware Sleep/Wake Interface - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2005, R. Byron Moore - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -#include <linux/module.h> -#include <acpi/acpi.h> - -#define _COMPONENT ACPI_HARDWARE -ACPI_MODULE_NAME("hwsleep") - -/******************************************************************************* - * - * FUNCTION: acpi_set_firmware_waking_vector - * - * PARAMETERS: physical_address - Physical address of ACPI real mode - * entry point. - * - * RETURN: Status - * - * DESCRIPTION: Access function for the firmware_waking_vector field in FACS - * - ******************************************************************************/ -acpi_status -acpi_set_firmware_waking_vector(acpi_physical_address physical_address) -{ - - ACPI_FUNCTION_TRACE("acpi_set_firmware_waking_vector"); - - /* Set the vector */ - - if (acpi_gbl_common_fACS.vector_width == 32) { - *(ACPI_CAST_PTR - (u32, acpi_gbl_common_fACS.firmware_waking_vector)) - = (u32) physical_address; - } else { - *acpi_gbl_common_fACS.firmware_waking_vector = physical_address; - } - - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_get_firmware_waking_vector - * - * PARAMETERS: *physical_address - Where the contents of - * the firmware_waking_vector field of - * the FACS will be returned. - * - * RETURN: Status, vector - * - * DESCRIPTION: Access function for the firmware_waking_vector field in FACS - * - ******************************************************************************/ - -#ifdef ACPI_FUTURE_USAGE -acpi_status -acpi_get_firmware_waking_vector(acpi_physical_address * physical_address) -{ - - ACPI_FUNCTION_TRACE("acpi_get_firmware_waking_vector"); - - if (!physical_address) { - return_ACPI_STATUS(AE_BAD_PARAMETER); - } - - /* Get the vector */ - - if (acpi_gbl_common_fACS.vector_width == 32) { - *physical_address = (acpi_physical_address) - * - (ACPI_CAST_PTR - (u32, acpi_gbl_common_fACS.firmware_waking_vector)); - } else { - *physical_address = - *acpi_gbl_common_fACS.firmware_waking_vector; - } - - return_ACPI_STATUS(AE_OK); -} -#endif - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state_prep - * - * PARAMETERS: sleep_state - Which sleep state to enter - * - * RETURN: Status - * - * DESCRIPTION: Prepare to enter a system sleep state (see ACPI 2.0 spec p 231) - * This function must execute with interrupts enabled. - * We break sleeping into 2 stages so that OSPM can handle - * various OS-specific tasks between the two steps. - * - ******************************************************************************/ - -acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) -{ - acpi_status status; - struct acpi_object_list arg_list; - union acpi_object arg; - - ACPI_FUNCTION_TRACE("acpi_enter_sleep_state_prep"); - - /* - * _PSW methods could be run here to enable wake-on keyboard, LAN, etc. - */ - status = acpi_get_sleep_type_data(sleep_state, - &acpi_gbl_sleep_type_a, - &acpi_gbl_sleep_type_b); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Setup parameter object */ - - arg_list.count = 1; - arg_list.pointer = &arg; - - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; - - /* Run the _PTS and _GTS methods */ - - status = acpi_evaluate_object(NULL, METHOD_NAME__PTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); - } - - status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); - } - - /* Setup the argument to _SST */ - - switch (sleep_state) { - case ACPI_STATE_S0: - arg.integer.value = ACPI_SST_WORKING; - break; - - case ACPI_STATE_S1: - case ACPI_STATE_S2: - case ACPI_STATE_S3: - arg.integer.value = ACPI_SST_SLEEPING; - break; - - case ACPI_STATE_S4: - arg.integer.value = ACPI_SST_SLEEP_CONTEXT; - break; - - default: - arg.integer.value = ACPI_SST_INDICATOR_OFF; /* Default is off */ - break; - } - - /* Set the system indicators to show the desired sleep state. */ - - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_REPORT_ERROR(("Method _SST failed, %s\n", - acpi_format_exception(status))); - } - - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state - * - * PARAMETERS: sleep_state - Which sleep state to enter - * - * RETURN: Status - * - * DESCRIPTION: Enter a system sleep state (see ACPI 2.0 spec p 231) - * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED - * - ******************************************************************************/ - -acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) -{ - u32 PM1Acontrol; - u32 PM1Bcontrol; - struct acpi_bit_register_info *sleep_type_reg_info; - struct acpi_bit_register_info *sleep_enable_reg_info; - u32 in_value; - acpi_status status; - - ACPI_FUNCTION_TRACE("acpi_enter_sleep_state"); - - if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) || - (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) { - ACPI_REPORT_ERROR(("Sleep values out of range: A=%X B=%X\n", - acpi_gbl_sleep_type_a, - acpi_gbl_sleep_type_b)); - return_ACPI_STATUS(AE_AML_OPERAND_VALUE); - } - - sleep_type_reg_info = - acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A); - sleep_enable_reg_info = - acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE); - - /* Clear wake status */ - - status = - acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1, ACPI_MTX_DO_NOT_LOCK); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Clear all fixed and general purpose status bits */ - - status = acpi_hw_clear_acpi_status(ACPI_MTX_DO_NOT_LOCK); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * 1) Disable/Clear all GPEs - * 2) Enable all wakeup GPEs - */ - status = acpi_hw_disable_all_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - acpi_gbl_system_awake_and_running = FALSE; - - status = acpi_hw_enable_all_wakeup_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Get current value of PM1A control */ - - status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1_CONTROL, &PM1Acontrol); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - ACPI_DEBUG_PRINT((ACPI_DB_INIT, - "Entering sleep state [S%d]\n", sleep_state)); - - /* Clear SLP_EN and SLP_TYP fields */ - - PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask | - sleep_enable_reg_info->access_bit_mask); - PM1Bcontrol = PM1Acontrol; - - /* Insert SLP_TYP bits */ - - PM1Acontrol |= - (acpi_gbl_sleep_type_a << sleep_type_reg_info->bit_position); - PM1Bcontrol |= - (acpi_gbl_sleep_type_b << sleep_type_reg_info->bit_position); - - /* - * We split the writes of SLP_TYP and SLP_EN to workaround - * poorly implemented hardware. - */ - - /* Write #1: fill in SLP_TYP data */ - - status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1A_CONTROL, - PM1Acontrol); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1B_CONTROL, - PM1Bcontrol); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Insert SLP_ENABLE bit */ - - PM1Acontrol |= sleep_enable_reg_info->access_bit_mask; - PM1Bcontrol |= sleep_enable_reg_info->access_bit_mask; - - /* Write #2: SLP_TYP + SLP_EN */ - - ACPI_FLUSH_CPU_CACHE(); - - status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1A_CONTROL, - PM1Acontrol); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1B_CONTROL, - PM1Bcontrol); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - if (sleep_state > ACPI_STATE_S3) { - /* - * We wanted to sleep > S3, but it didn't happen (by virtue of the - * fact that we are still executing!) - * - * Wait ten seconds, then try again. This is to get S4/S5 to work on - * all machines. - * - * We wait so long to allow chipsets that poll this reg very slowly to - * still read the right value. Ideally, this block would go - * away entirely. - */ - acpi_os_stall(10000000); - - status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1_CONTROL, - sleep_enable_reg_info-> - access_bit_mask); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } - - /* Wait until we enter sleep state */ - - do { - status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value, - ACPI_MTX_DO_NOT_LOCK); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Spin until we wake */ - - } while (!in_value); - - return_ACPI_STATUS(AE_OK); -} - -EXPORT_SYMBOL(acpi_enter_sleep_state); - -/******************************************************************************* - * - * FUNCTION: acpi_enter_sleep_state_s4bios - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Perform a S4 bios request. - * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED - * - ******************************************************************************/ - -acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void) -{ - u32 in_value; - acpi_status status; - - ACPI_FUNCTION_TRACE("acpi_enter_sleep_state_s4bios"); - - status = - acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1, ACPI_MTX_DO_NOT_LOCK); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - status = acpi_hw_clear_acpi_status(ACPI_MTX_DO_NOT_LOCK); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * 1) Disable/Clear all GPEs - * 2) Enable all wakeup GPEs - */ - status = acpi_hw_disable_all_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - acpi_gbl_system_awake_and_running = FALSE; - - status = acpi_hw_enable_all_wakeup_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - ACPI_FLUSH_CPU_CACHE(); - - status = acpi_os_write_port(acpi_gbl_FADT->smi_cmd, - (u32) acpi_gbl_FADT->S4bios_req, 8); - - do { - acpi_os_stall(1000); - status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value, - ACPI_MTX_DO_NOT_LOCK); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - } while (!in_value); - - return_ACPI_STATUS(AE_OK); -} - -EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios); - -/******************************************************************************* - * - * FUNCTION: acpi_leave_sleep_state - * - * PARAMETERS: sleep_state - Which sleep state we just exited - * - * RETURN: Status - * - * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep - * Called with interrupts ENABLED. - * - ******************************************************************************/ - -acpi_status acpi_leave_sleep_state(u8 sleep_state) -{ - struct acpi_object_list arg_list; - union acpi_object arg; - acpi_status status; - struct acpi_bit_register_info *sleep_type_reg_info; - struct acpi_bit_register_info *sleep_enable_reg_info; - u32 PM1Acontrol; - u32 PM1Bcontrol; - - ACPI_FUNCTION_TRACE("acpi_leave_sleep_state"); - - /* - * Set SLP_TYPE and SLP_EN to state S0. - * This is unclear from the ACPI Spec, but it is required - * by some machines. - */ - status = acpi_get_sleep_type_data(ACPI_STATE_S0, - &acpi_gbl_sleep_type_a, - &acpi_gbl_sleep_type_b); - if (ACPI_SUCCESS(status)) { - sleep_type_reg_info = - acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_TYPE_A); - sleep_enable_reg_info = - acpi_hw_get_bit_register_info(ACPI_BITREG_SLEEP_ENABLE); - - /* Get current value of PM1A control */ - - status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1_CONTROL, - &PM1Acontrol); - if (ACPI_SUCCESS(status)) { - /* Clear SLP_EN and SLP_TYP fields */ - - PM1Acontrol &= ~(sleep_type_reg_info->access_bit_mask | - sleep_enable_reg_info-> - access_bit_mask); - PM1Bcontrol = PM1Acontrol; - - /* Insert SLP_TYP bits */ - - PM1Acontrol |= - (acpi_gbl_sleep_type_a << sleep_type_reg_info-> - bit_position); - PM1Bcontrol |= - (acpi_gbl_sleep_type_b << sleep_type_reg_info-> - bit_position); - - /* Just ignore any errors */ - - (void)acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1A_CONTROL, - PM1Acontrol); - (void)acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1B_CONTROL, - PM1Bcontrol); - } - } - - /* Ensure enter_sleep_state_prep -> enter_sleep_state ordering */ - - acpi_gbl_sleep_type_a = ACPI_SLEEP_TYPE_INVALID; - - /* Setup parameter object */ - - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - - /* Ignore any errors from these methods */ - - arg.integer.value = ACPI_SST_WAKING; - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_REPORT_ERROR(("Method _SST failed, %s\n", - acpi_format_exception(status))); - } - - arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_REPORT_ERROR(("Method _BFS failed, %s\n", - acpi_format_exception(status))); - } - - status = acpi_evaluate_object(NULL, METHOD_NAME__WAK, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_REPORT_ERROR(("Method _WAK failed, %s\n", - acpi_format_exception(status))); - } - /* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */ - - /* - * Restore the GPEs: - * 1) Disable/Clear all GPEs - * 2) Enable all runtime GPEs - */ - status = acpi_hw_disable_all_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - acpi_gbl_system_awake_and_running = TRUE; - - status = acpi_hw_enable_all_runtime_gpes(); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Enable power button */ - - (void) - acpi_set_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON].enable_register_id, 1, - ACPI_MTX_DO_NOT_LOCK); - - (void) - acpi_set_register(acpi_gbl_fixed_event_info - [ACPI_EVENT_POWER_BUTTON].status_register_id, 1, - ACPI_MTX_DO_NOT_LOCK); - - arg.integer.value = ACPI_SST_WORKING; - status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_REPORT_ERROR(("Method _SST failed, %s\n", - acpi_format_exception(status))); - } - - return_ACPI_STATUS(status); -} |