1 files changed, 122 insertions, 108 deletions

diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index 50cc3be7772..96d007df65e 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: hwxface - Public ACPICA hardware interfaces
@@ -6,7 +5,7 @@
  *****************************************************************************/
 
 /*
- * Copyright (C) 2000 - 2010, Intel Corp.
+ * Copyright (C) 2000 - 2014, Intel Corp.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -42,6 +41,8 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
+#define EXPORT_ACPI_INTERFACES
+
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
@@ -83,11 +84,17 @@ acpi_status acpi_reset(void)
 		 * For I/O space, write directly to the OSL. This bypasses the port
 		 * validation mechanism, which may block a valid write to the reset
 		 * register.
+		 *
+		 * NOTE:
+		 * The ACPI spec requires the reset register width to be 8, so we
+		 * hardcode it here and ignore the FADT value. This maintains
+		 * compatibility with other ACPI implementations that have allowed
+		 * BIOS code with bad register width values to go unnoticed.
 		 */
 		status =
 		    acpi_os_write_port((acpi_io_address) reset_reg->address,
 				       acpi_gbl_FADT.reset_value,
-				       reset_reg->bit_width);
+				       ACPI_RESET_REGISTER_WIDTH);
 	} else {
 		/* Write the reset value to the reset register */
 
@@ -103,8 +110,8 @@ ACPI_EXPORT_SYMBOL(acpi_reset)
  *
  * FUNCTION:    acpi_read
  *
- * PARAMETERS:  Value               - Where the value is returned
- *              Reg                 - GAS register structure
+ * PARAMETERS:  value               - Where the value is returned
+ *              reg                 - GAS register structure
  *
  * RETURN:      Status
  *
@@ -112,14 +119,15 @@ ACPI_EXPORT_SYMBOL(acpi_reset)
  *
  * LIMITATIONS: <These limitations also apply to acpi_write>
  *      bit_width must be exactly 8, 16, 32, or 64.
- *      space_iD must be system_memory or system_iO.
+ *      space_ID must be system_memory or system_IO.
  *      bit_offset and access_width are currently ignored, as there has
  *          not been a need to implement these.
  *
  ******************************************************************************/
 acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg)
 {
-	u32 value;
+	u32 value_lo;
+	u32 value_hi;
 	u32 width;
 	u64 address;
 	acpi_status status;
@@ -137,59 +145,48 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg)
 		return (status);
 	}
 
-	width = reg->bit_width;
-	if (width == 64) {
-		width = 32;	/* Break into two 32-bit transfers */
-	}
-
-	/* Initialize entire 64-bit return value to zero */
-
-	*return_value = 0;
-	value = 0;
-
 	/*
-	 * Two address spaces supported: Memory or IO. PCI_Config is
+	 * Two address spaces supported: Memory or I/O. PCI_Config is
 	 * not supported here because the GAS structure is insufficient
 	 */
 	if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
 		status = acpi_os_read_memory((acpi_physical_address)
-					     address, &value, width);
+					     address, return_value,
+					     reg->bit_width);
 		if (ACPI_FAILURE(status)) {
 			return (status);
 		}
-		*return_value = value;
+	} else {		/* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
 
-		if (reg->bit_width == 64) {
+		value_lo = 0;
+		value_hi = 0;
 
-			/* Read the top 32 bits */
-
-			status = acpi_os_read_memory((acpi_physical_address)
-						     (address + 4), &value, 32);
-			if (ACPI_FAILURE(status)) {
-				return (status);
-			}
-			*return_value |= ((u64)value << 32);
+		width = reg->bit_width;
+		if (width == 64) {
+			width = 32;	/* Break into two 32-bit transfers */
 		}
-	} else {		/* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
 
 		status = acpi_hw_read_port((acpi_io_address)
-					   address, &value, width);
+					   address, &value_lo, width);
 		if (ACPI_FAILURE(status)) {
 			return (status);
 		}
-		*return_value = value;
 
 		if (reg->bit_width == 64) {
 
 			/* Read the top 32 bits */
 
 			status = acpi_hw_read_port((acpi_io_address)
-						   (address + 4), &value, 32);
+						   (address + 4), &value_hi,
+						   32);
 			if (ACPI_FAILURE(status)) {
 				return (status);
 			}
-			*return_value |= ((u64)value << 32);
 		}
+
+		/* Set the return value only if status is AE_OK */
+
+		*return_value = (value_lo | ((u64)value_hi << 32));
 	}
 
 	ACPI_DEBUG_PRINT((ACPI_DB_IO,
@@ -198,7 +195,7 @@ acpi_status acpi_read(u64 *return_value, struct acpi_generic_address *reg)
 			  ACPI_FORMAT_UINT64(address),
 			  acpi_ut_get_region_name(reg->space_id)));
 
-	return (status);
+	return (AE_OK);
 }
 
 ACPI_EXPORT_SYMBOL(acpi_read)
@@ -207,8 +204,8 @@ ACPI_EXPORT_SYMBOL(acpi_read)
  *
  * FUNCTION:    acpi_write
  *
- * PARAMETERS:  Value               - Value to be written
- *              Reg                 - GAS register structure
+ * PARAMETERS:  value               - Value to be written
+ *              reg                 - GAS register structure
  *
  * RETURN:      Status
  *
@@ -230,32 +227,22 @@ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg)
 		return (status);
 	}
 
-	width = reg->bit_width;
-	if (width == 64) {
-		width = 32;	/* Break into two 32-bit transfers */
-	}
-
 	/*
 	 * Two address spaces supported: Memory or IO. PCI_Config is
 	 * not supported here because the GAS structure is insufficient
 	 */
 	if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
 		status = acpi_os_write_memory((acpi_physical_address)
-					      address, ACPI_LODWORD(value),
-					      width);
+					      address, value, reg->bit_width);
 		if (ACPI_FAILURE(status)) {
 			return (status);
 		}
+	} else {		/* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
 
-		if (reg->bit_width == 64) {
-			status = acpi_os_write_memory((acpi_physical_address)
-						      (address + 4),
-						      ACPI_HIDWORD(value), 32);
-			if (ACPI_FAILURE(status)) {
-				return (status);
-			}
+		width = reg->bit_width;
+		if (width == 64) {
+			width = 32;	/* Break into two 32-bit transfers */
 		}
-	} else {		/* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */
 
 		status = acpi_hw_write_port((acpi_io_address)
 					    address, ACPI_LODWORD(value),
@@ -285,6 +272,7 @@ acpi_status acpi_write(u64 value, struct acpi_generic_address *reg)
 
 ACPI_EXPORT_SYMBOL(acpi_write)
 
+#if (!ACPI_REDUCED_HARDWARE)
 /*******************************************************************************
  *
  * FUNCTION:    acpi_read_bit_register
@@ -354,8 +342,8 @@ ACPI_EXPORT_SYMBOL(acpi_read_bit_register)
  * FUNCTION:    acpi_write_bit_register
  *
  * PARAMETERS:  register_id     - ID of ACPI Bit Register to access
- *              Value           - Value to write to the register, in bit
- *                                position zero. The bit is automaticallly
+ *              value           - Value to write to the register, in bit
+ *                                position zero. The bit is automatically
  *                                shifted to the correct position.
  *
  * RETURN:      Status
@@ -452,7 +440,7 @@ unlock_and_exit:
 }
 
 ACPI_EXPORT_SYMBOL(acpi_write_bit_register)
-
+#endif				/* !ACPI_REDUCED_HARDWARE */
 /*******************************************************************************
  *
  * FUNCTION:    acpi_get_sleep_type_data
@@ -461,17 +449,41 @@ ACPI_EXPORT_SYMBOL(acpi_write_bit_register)
  *              *sleep_type_a        - Where SLP_TYPa is returned
  *              *sleep_type_b        - Where SLP_TYPb is returned
  *
- * RETURN:      Status - ACPI status
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested
+ *              sleep state via the appropriate \_Sx object.
+ *
+ *  The sleep state package returned from the corresponding \_Sx_ object
+ *  must contain at least one integer.
+ *
+ *  March 2005:
+ *  Added support for a package that contains two integers. This
+ *  goes against the ACPI specification which defines this object as a
+ *  package with one encoded DWORD integer. However, existing practice
+ *  by many BIOS vendors is to return a package with 2 or more integer
+ *  elements, at least one per sleep type (A/B).
+ *
+ *  January 2013:
+ *  Therefore, we must be prepared to accept a package with either a
+ *  single integer or multiple integers.
  *
- * DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested sleep
- *              state.
+ *  The single integer DWORD format is as follows:
+ *      BYTE 0 - Value for the PM1A SLP_TYP register
+ *      BYTE 1 - Value for the PM1B SLP_TYP register
+ *      BYTE 2-3 - Reserved
+ *
+ *  The dual integer format is as follows:
+ *      Integer 0 - Value for the PM1A SLP_TYP register
+ *      Integer 1 - Value for the PM1A SLP_TYP register
  *
  ******************************************************************************/
 acpi_status
 acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b)
 {
-	acpi_status status = AE_OK;
+	acpi_status status;
 	struct acpi_evaluate_info *info;
+	union acpi_operand_object **elements;
 
 	ACPI_FUNCTION_TRACE(acpi_get_sleep_type_data);
 
@@ -488,18 +500,14 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b)
 		return_ACPI_STATUS(AE_NO_MEMORY);
 	}
 
-	info->pathname =
+	/*
+	 * Evaluate the \_Sx namespace object containing the register values
+	 * for this state
+	 */
+	info->relative_pathname =
 	    ACPI_CAST_PTR(char, acpi_gbl_sleep_state_names[sleep_state]);
-
-	/* Evaluate the namespace object containing the values for this state */
-
 	status = acpi_ns_evaluate(info);
 	if (ACPI_FAILURE(status)) {
-		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
-				  "%s while evaluating SleepState [%s]\n",
-				  acpi_format_exception(status),
-				  info->pathname));
-
 		goto cleanup;
 	}
 
@@ -507,65 +515,71 @@ acpi_get_sleep_type_data(u8 sleep_state, u8 *sleep_type_a, u8 *sleep_type_b)
 
 	if (!info->return_object) {
 		ACPI_ERROR((AE_INFO, "No Sleep State object returned from [%s]",
-			    info->pathname));
-		status = AE_NOT_EXIST;
+			    info->relative_pathname));
+		status = AE_AML_NO_RETURN_VALUE;
+		goto cleanup;
 	}
 
-	/* It must be of type Package */
+	/* Return object must be of type Package */
 
-	else if (info->return_object->common.type != ACPI_TYPE_PACKAGE) {
+	if (info->return_object->common.type != ACPI_TYPE_PACKAGE) {
 		ACPI_ERROR((AE_INFO,
 			    "Sleep State return object is not a Package"));
 		status = AE_AML_OPERAND_TYPE;
+		goto cleanup1;
 	}
 
 	/*
-	 * The package must have at least two elements. NOTE (March 2005): This
-	 * goes against the current ACPI spec which defines this object as a
-	 * package with one encoded DWORD element. However, existing practice
-	 * by BIOS vendors seems to be to have 2 or more elements, at least
-	 * one per sleep type (A/B).
+	 * Any warnings about the package length or the object types have
+	 * already been issued by the predefined name module -- there is no
+	 * need to repeat them here.
 	 */
-	else if (info->return_object->package.count < 2) {
-		ACPI_ERROR((AE_INFO,
-			    "Sleep State return package does not have at least two elements"));
-		status = AE_AML_NO_OPERAND;
-	}
+	elements = info->return_object->package.elements;
+	switch (info->return_object->package.count) {
+	case 0:
 
-	/* The first two elements must both be of type Integer */
+		status = AE_AML_PACKAGE_LIMIT;
+		break;
 
-	else if (((info->return_object->package.elements[0])->common.type
-		  != ACPI_TYPE_INTEGER) ||
-		 ((info->return_object->package.elements[1])->common.type
-		  != ACPI_TYPE_INTEGER)) {
-		ACPI_ERROR((AE_INFO,
-			    "Sleep State return package elements are not both Integers "
-			    "(%s, %s)",
-			    acpi_ut_get_object_type_name(info->return_object->
-							 package.elements[0]),
-			    acpi_ut_get_object_type_name(info->return_object->
-							 package.elements[1])));
-		status = AE_AML_OPERAND_TYPE;
-	} else {
-		/* Valid _Sx_ package size, type, and value */
+	case 1:
+
+		if (elements[0]->common.type != ACPI_TYPE_INTEGER) {
+			status = AE_AML_OPERAND_TYPE;
+			break;
+		}
+
+		/* A valid _Sx_ package with one integer */
+
+		*sleep_type_a = (u8)elements[0]->integer.value;
+		*sleep_type_b = (u8)(elements[0]->integer.value >> 8);
+		break;
+
+	case 2:
+	default:
 
-		*sleep_type_a = (u8)
-		    (info->return_object->package.elements[0])->integer.value;
-		*sleep_type_b = (u8)
-		    (info->return_object->package.elements[1])->integer.value;
+		if ((elements[0]->common.type != ACPI_TYPE_INTEGER) ||
+		    (elements[1]->common.type != ACPI_TYPE_INTEGER)) {
+			status = AE_AML_OPERAND_TYPE;
+			break;
+		}
+
+		/* A valid _Sx_ package with two integers */
+
+		*sleep_type_a = (u8)elements[0]->integer.value;
+		*sleep_type_b = (u8)elements[1]->integer.value;
+		break;
 	}
 
+cleanup1:
+	acpi_ut_remove_reference(info->return_object);
+
+cleanup:
 	if (ACPI_FAILURE(status)) {
 		ACPI_EXCEPTION((AE_INFO, status,
-				"While evaluating SleepState [%s], bad Sleep object %p type %s",
-				info->pathname, info->return_object,
-				acpi_ut_get_object_type_name(info->
-							     return_object)));
+				"While evaluating Sleep State [%s]",
+				info->relative_pathname));
 	}
 
-	acpi_ut_remove_reference(info->return_object);
-
-      cleanup:
 	ACPI_FREE(info);
 	return_ACPI_STATUS(status);
 }