diff options
Diffstat (limited to 'drivers/acpi/acpica/hwregs.c')
| -rw-r--r-- | drivers/acpi/acpica/hwregs.c | 256 |
1 files changed, 223 insertions, 33 deletions
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c index 23d5505cb1f..e0fd9b4978c 100644 --- a/drivers/acpi/acpica/hwregs.c +++ b/drivers/acpi/acpica/hwregs.c @@ -1,4 +1,3 @@ - /******************************************************************************* * * Module Name: hwregs - Read/write access functions for the various ACPI @@ -7,7 +6,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2008, Intel Corp. + * Copyright (C) 2000 - 2014, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -45,12 +44,12 @@ #include <acpi/acpi.h> #include "accommon.h" -#include "acnamesp.h" #include "acevents.h" #define _COMPONENT ACPI_HARDWARE ACPI_MODULE_NAME("hwregs") +#if (!ACPI_REDUCED_HARDWARE) /* Local Prototypes */ static acpi_status acpi_hw_read_multiple(u32 *value, @@ -62,6 +61,191 @@ acpi_hw_write_multiple(u32 value, struct acpi_generic_address *register_a, struct acpi_generic_address *register_b); +#endif /* !ACPI_REDUCED_HARDWARE */ + +/****************************************************************************** + * + * FUNCTION: acpi_hw_validate_register + * + * PARAMETERS: reg - GAS register structure + * max_bit_width - Max bit_width supported (32 or 64) + * address - Pointer to where the gas->address + * is returned + * + * RETURN: Status + * + * DESCRIPTION: Validate the contents of a GAS register. Checks the GAS + * pointer, Address, space_id, bit_width, and bit_offset. + * + ******************************************************************************/ + +acpi_status +acpi_hw_validate_register(struct acpi_generic_address *reg, + u8 max_bit_width, u64 *address) +{ + + /* Must have a valid pointer to a GAS structure */ + + if (!reg) { + return (AE_BAD_PARAMETER); + } + + /* + * Copy the target address. This handles possible alignment issues. + * Address must not be null. A null address also indicates an optional + * ACPI register that is not supported, so no error message. + */ + ACPI_MOVE_64_TO_64(address, ®->address); + if (!(*address)) { + return (AE_BAD_ADDRESS); + } + + /* Validate the space_ID */ + + if ((reg->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && + (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { + ACPI_ERROR((AE_INFO, + "Unsupported address space: 0x%X", reg->space_id)); + return (AE_SUPPORT); + } + + /* Validate the bit_width */ + + if ((reg->bit_width != 8) && + (reg->bit_width != 16) && + (reg->bit_width != 32) && (reg->bit_width != max_bit_width)) { + ACPI_ERROR((AE_INFO, + "Unsupported register bit width: 0x%X", + reg->bit_width)); + return (AE_SUPPORT); + } + + /* Validate the bit_offset. Just a warning for now. */ + + if (reg->bit_offset != 0) { + ACPI_WARNING((AE_INFO, + "Unsupported register bit offset: 0x%X", + reg->bit_offset)); + } + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_hw_read + * + * PARAMETERS: value - Where the value is returned + * reg - GAS register structure + * + * RETURN: Status + * + * DESCRIPTION: Read from either memory or IO space. This is a 32-bit max + * version of acpi_read, used internally since the overhead of + * 64-bit values is not needed. + * + * LIMITATIONS: <These limitations also apply to acpi_hw_write> + * bit_width must be exactly 8, 16, or 32. + * space_ID must be system_memory or system_IO. + * bit_offset and access_width are currently ignored, as there has + * not been a need to implement these. + * + ******************************************************************************/ + +acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg) +{ + u64 address; + u64 value64; + acpi_status status; + + ACPI_FUNCTION_NAME(hw_read); + + /* Validate contents of the GAS register */ + + status = acpi_hw_validate_register(reg, 32, &address); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Initialize entire 32-bit return value to zero */ + + *value = 0; + + /* + * Two address spaces supported: Memory or IO. PCI_Config is + * not supported here because the GAS structure is insufficient + */ + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { + status = acpi_os_read_memory((acpi_physical_address) + address, &value64, reg->bit_width); + + *value = (u32)value64; + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ + + status = acpi_hw_read_port((acpi_io_address) + address, value, reg->bit_width); + } + + ACPI_DEBUG_PRINT((ACPI_DB_IO, + "Read: %8.8X width %2d from %8.8X%8.8X (%s)\n", + *value, reg->bit_width, ACPI_FORMAT_UINT64(address), + acpi_ut_get_region_name(reg->space_id))); + + return (status); +} + +/****************************************************************************** + * + * FUNCTION: acpi_hw_write + * + * PARAMETERS: value - Value to be written + * reg - GAS register structure + * + * RETURN: Status + * + * DESCRIPTION: Write to either memory or IO space. This is a 32-bit max + * version of acpi_write, used internally since the overhead of + * 64-bit values is not needed. + * + ******************************************************************************/ + +acpi_status acpi_hw_write(u32 value, struct acpi_generic_address *reg) +{ + u64 address; + acpi_status status; + + ACPI_FUNCTION_NAME(hw_write); + + /* Validate contents of the GAS register */ + + status = acpi_hw_validate_register(reg, 32, &address); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* + * Two address spaces supported: Memory or IO. PCI_Config is + * not supported here because the GAS structure is insufficient + */ + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { + status = acpi_os_write_memory((acpi_physical_address) + address, (u64)value, + reg->bit_width); + } else { /* ACPI_ADR_SPACE_SYSTEM_IO, validated earlier */ + + status = acpi_hw_write_port((acpi_io_address) + address, value, reg->bit_width); + } + + ACPI_DEBUG_PRINT((ACPI_DB_IO, + "Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n", + value, reg->bit_width, ACPI_FORMAT_UINT64(address), + acpi_ut_get_region_name(reg->space_id))); + + return (status); +} + +#if (!ACPI_REDUCED_HARDWARE) /******************************************************************************* * * FUNCTION: acpi_hw_clear_acpi_status @@ -91,22 +275,23 @@ acpi_status acpi_hw_clear_acpi_status(void) status = acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS, ACPI_BITMASK_ALL_FIXED_STATUS); - if (ACPI_FAILURE(status)) { - goto unlock_and_exit; - } + + acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags); + + if (ACPI_FAILURE(status)) + goto exit; /* Clear the GPE Bits in all GPE registers in all GPE blocks */ status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL); - unlock_and_exit: - acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags); +exit: return_ACPI_STATUS(status); } /******************************************************************************* * - * FUNCTION: acpi_hw_get_register_bit_mask + * FUNCTION: acpi_hw_get_bit_register_info * * PARAMETERS: register_id - Index of ACPI Register to access * @@ -121,7 +306,7 @@ struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id) ACPI_FUNCTION_ENTRY(); if (register_id > ACPI_BITREG_MAX) { - ACPI_ERROR((AE_INFO, "Invalid BitRegister ID: %X", + ACPI_ERROR((AE_INFO, "Invalid BitRegister ID: 0x%X", register_id)); return (NULL); } @@ -152,15 +337,16 @@ acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control) ACPI_FUNCTION_TRACE(hw_write_pm1_control); - status = acpi_write(pm1a_control, &acpi_gbl_FADT.xpm1a_control_block); + status = + acpi_hw_write(pm1a_control, &acpi_gbl_FADT.xpm1a_control_block); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } if (acpi_gbl_FADT.xpm1b_control_block.address) { status = - acpi_write(pm1b_control, - &acpi_gbl_FADT.xpm1b_control_block); + acpi_hw_write(pm1b_control, + &acpi_gbl_FADT.xpm1b_control_block); } return_ACPI_STATUS(status); } @@ -177,8 +363,7 @@ acpi_status acpi_hw_write_pm1_control(u32 pm1a_control, u32 pm1b_control) * DESCRIPTION: Read from the specified ACPI register * ******************************************************************************/ -acpi_status -acpi_hw_register_read(u32 register_id, u32 * return_value) +acpi_status acpi_hw_register_read(u32 register_id, u32 *return_value) { u32 value = 0; acpi_status status; @@ -218,12 +403,13 @@ acpi_hw_register_read(u32 register_id, u32 * return_value) case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ - status = acpi_read(&value, &acpi_gbl_FADT.xpm2_control_block); + status = + acpi_hw_read(&value, &acpi_gbl_FADT.xpm2_control_block); break; case ACPI_REGISTER_PM_TIMER: /* 32-bit access */ - status = acpi_read(&value, &acpi_gbl_FADT.xpm_timer_block); + status = acpi_hw_read(&value, &acpi_gbl_FADT.xpm_timer_block); break; case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */ @@ -233,7 +419,8 @@ acpi_hw_register_read(u32 register_id, u32 * return_value) break; default: - ACPI_ERROR((AE_INFO, "Unknown Register ID: %X", register_id)); + + ACPI_ERROR((AE_INFO, "Unknown Register ID: 0x%X", register_id)); status = AE_BAD_PARAMETER; break; } @@ -250,7 +437,7 @@ acpi_hw_register_read(u32 register_id, u32 * return_value) * FUNCTION: acpi_hw_register_write * * PARAMETERS: register_id - ACPI Register ID - * Value - The value to write + * value - The value to write * * RETURN: Status * @@ -297,7 +484,7 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) &acpi_gbl_xpm1b_status); break; - case ACPI_REGISTER_PM1_ENABLE: /* PM1 A/B: 16-bit access */ + case ACPI_REGISTER_PM1_ENABLE: /* PM1 A/B: 16-bit access each */ status = acpi_hw_write_multiple(value, &acpi_gbl_xpm1a_enable, @@ -305,7 +492,6 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) break; case ACPI_REGISTER_PM1_CONTROL: /* PM1 A/B: 16-bit access each */ - /* * Perform a read first to preserve certain bits (per ACPI spec) * Note: This includes SCI_EN, we never want to change this bit @@ -334,13 +520,13 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) break; case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */ - /* * For control registers, all reserved bits must be preserved, * as per the ACPI spec. */ status = - acpi_read(&read_value, &acpi_gbl_FADT.xpm2_control_block); + acpi_hw_read(&read_value, + &acpi_gbl_FADT.xpm2_control_block); if (ACPI_FAILURE(status)) { goto exit; } @@ -350,12 +536,13 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) ACPI_INSERT_BITS(value, ACPI_PM2_CONTROL_PRESERVED_BITS, read_value); - status = acpi_write(value, &acpi_gbl_FADT.xpm2_control_block); + status = + acpi_hw_write(value, &acpi_gbl_FADT.xpm2_control_block); break; case ACPI_REGISTER_PM_TIMER: /* 32-bit access */ - status = acpi_write(value, &acpi_gbl_FADT.xpm_timer_block); + status = acpi_hw_write(value, &acpi_gbl_FADT.xpm_timer_block); break; case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */ @@ -367,12 +554,13 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) break; default: - ACPI_ERROR((AE_INFO, "Unknown Register ID: %X", register_id)); + + ACPI_ERROR((AE_INFO, "Unknown Register ID: 0x%X", register_id)); status = AE_BAD_PARAMETER; break; } - exit: +exit: return_ACPI_STATUS(status); } @@ -380,7 +568,7 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value) * * FUNCTION: acpi_hw_read_multiple * - * PARAMETERS: Value - Where the register value is returned + * PARAMETERS: value - Where the register value is returned * register_a - First ACPI register (required) * register_b - Second ACPI register (optional) * @@ -401,7 +589,7 @@ acpi_hw_read_multiple(u32 *value, /* The first register is always required */ - status = acpi_read(&value_a, register_a); + status = acpi_hw_read(&value_a, register_a); if (ACPI_FAILURE(status)) { return (status); } @@ -409,7 +597,7 @@ acpi_hw_read_multiple(u32 *value, /* Second register is optional */ if (register_b->address) { - status = acpi_read(&value_b, register_b); + status = acpi_hw_read(&value_b, register_b); if (ACPI_FAILURE(status)) { return (status); } @@ -433,7 +621,7 @@ acpi_hw_read_multiple(u32 *value, * * FUNCTION: acpi_hw_write_multiple * - * PARAMETERS: Value - The value to write + * PARAMETERS: value - The value to write * register_a - First ACPI register (required) * register_b - Second ACPI register (optional) * @@ -452,7 +640,7 @@ acpi_hw_write_multiple(u32 value, /* The first register is always required */ - status = acpi_write(value, register_a); + status = acpi_hw_write(value, register_a); if (ACPI_FAILURE(status)) { return (status); } @@ -470,8 +658,10 @@ acpi_hw_write_multiple(u32 value, * and writes have no side effects" */ if (register_b->address) { - status = acpi_write(value, register_b); + status = acpi_hw_write(value, register_b); } return (status); } + +#endif /* !ACPI_REDUCED_HARDWARE */ |