diff options
Diffstat (limited to 'crypto/Kconfig')
| -rw-r--r-- | crypto/Kconfig | 723 |
1 files changed, 697 insertions, 26 deletions
diff --git a/crypto/Kconfig b/crypto/Kconfig index 8dde4fcf99c..ce4012a5878 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -23,6 +23,7 @@ comment "Crypto core or helper" config CRYPTO_FIPS bool "FIPS 200 compliance" + depends on CRYPTO_ANSI_CPRNG && !CRYPTO_MANAGER_DISABLE_TESTS help This options enables the fips boot option which is required if you want to system to operate in a FIPS 200 @@ -56,6 +57,7 @@ config CRYPTO_BLKCIPHER2 tristate select CRYPTO_ALGAPI2 select CRYPTO_RNG2 + select CRYPTO_WORKQUEUE config CRYPTO_HASH tristate @@ -75,6 +77,15 @@ config CRYPTO_RNG2 tristate select CRYPTO_ALGAPI2 +config CRYPTO_PCOMP + tristate + select CRYPTO_PCOMP2 + select CRYPTO_ALGAPI + +config CRYPTO_PCOMP2 + tristate + select CRYPTO_ALGAPI2 + config CRYPTO_MANAGER tristate "Cryptographic algorithm manager" select CRYPTO_MANAGER2 @@ -87,10 +98,26 @@ config CRYPTO_MANAGER2 select CRYPTO_AEAD2 select CRYPTO_HASH2 select CRYPTO_BLKCIPHER2 + select CRYPTO_PCOMP2 + +config CRYPTO_USER + tristate "Userspace cryptographic algorithm configuration" + depends on NET + select CRYPTO_MANAGER + help + Userspace configuration for cryptographic instantiations such as + cbc(aes). + +config CRYPTO_MANAGER_DISABLE_TESTS + bool "Disable run-time self tests" + default y + depends on CRYPTO_MANAGER2 + help + Disable run-time self tests that normally take place at + algorithm registration. config CRYPTO_GF128MUL - tristate "GF(2^128) multiplication functions (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "GF(2^128) multiplication functions" help Efficient table driven implementation of multiplications in the field GF(2^128). This is needed by some cypher modes. This @@ -106,11 +133,25 @@ config CRYPTO_NULL help These are 'Null' algorithms, used by IPsec, which do nothing. +config CRYPTO_PCRYPT + tristate "Parallel crypto engine" + depends on SMP + select PADATA + select CRYPTO_MANAGER + select CRYPTO_AEAD + help + This converts an arbitrary crypto algorithm into a parallel + algorithm that executes in kernel threads. + +config CRYPTO_WORKQUEUE + tristate + config CRYPTO_CRYPTD tristate "Software async crypto daemon" select CRYPTO_BLKCIPHER select CRYPTO_HASH select CRYPTO_MANAGER + select CRYPTO_WORKQUEUE help This is a generic software asynchronous crypto daemon that converts an arbitrary synchronous software crypto algorithm @@ -133,6 +174,15 @@ config CRYPTO_TEST help Quick & dirty crypto test module. +config CRYPTO_ABLK_HELPER + tristate + select CRYPTO_CRYPTD + +config CRYPTO_GLUE_HELPER_X86 + tristate + depends on X86 + select CRYPTO_ALGAPI + comment "Authenticated Encryption with Associated Data" config CRYPTO_CCM @@ -146,7 +196,8 @@ config CRYPTO_GCM tristate "GCM/GMAC support" select CRYPTO_CTR select CRYPTO_AEAD - select CRYPTO_GF128MUL + select CRYPTO_GHASH + select CRYPTO_NULL help Support for Galois/Counter Mode (GCM) and Galois Message Authentication Code (GMAC). Required for IPSec. @@ -200,8 +251,7 @@ config CRYPTO_ECB the input block by block. config CRYPTO_LRW - tristate "LRW support (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "LRW support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER select CRYPTO_GF128MUL @@ -221,8 +271,7 @@ config CRYPTO_PCBC This block cipher algorithm is required for RxRPC. config CRYPTO_XTS - tristate "XTS support (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "XTS support" select CRYPTO_BLKCIPHER select CRYPTO_MANAGER select CRYPTO_GF128MUL @@ -233,6 +282,17 @@ config CRYPTO_XTS comment "Hash modes" +config CRYPTO_CMAC + tristate "CMAC support" + select CRYPTO_HASH + select CRYPTO_MANAGER + help + Cipher-based Message Authentication Code (CMAC) specified by + The National Institute of Standards and Technology (NIST). + + https://tools.ietf.org/html/rfc4493 + http://csrc.nist.gov/publications/nistpubs/800-38B/SP_800-38B.pdf + config CRYPTO_HMAC tristate "HMAC support" select CRYPTO_HASH @@ -243,7 +303,6 @@ config CRYPTO_HMAC config CRYPTO_XCBC tristate "XCBC support" - depends on EXPERIMENTAL select CRYPTO_HASH select CRYPTO_MANAGER help @@ -252,11 +311,23 @@ config CRYPTO_XCBC http://csrc.nist.gov/encryption/modes/proposedmodes/ xcbc-mac/xcbc-mac-spec.pdf +config CRYPTO_VMAC + tristate "VMAC support" + select CRYPTO_HASH + select CRYPTO_MANAGER + help + VMAC is a message authentication algorithm designed for + very high speed on 64-bit architectures. + + See also: + <http://fastcrypto.org/vmac> + comment "Digest" config CRYPTO_CRC32C tristate "CRC32c CRC algorithm" select CRYPTO_HASH + select CRC32 help Castagnoli, et al Cyclic Redundancy-Check Algorithm. Used by iSCSI for header and data digests and by others. @@ -274,6 +345,61 @@ config CRYPTO_CRC32C_INTEL gain performance compared with software implementation. Module will be crc32c-intel. +config CRYPTO_CRC32C_SPARC64 + tristate "CRC32c CRC algorithm (SPARC64)" + depends on SPARC64 + select CRYPTO_HASH + select CRC32 + help + CRC32c CRC algorithm implemented using sparc64 crypto instructions, + when available. + +config CRYPTO_CRC32 + tristate "CRC32 CRC algorithm" + select CRYPTO_HASH + select CRC32 + help + CRC-32-IEEE 802.3 cyclic redundancy-check algorithm. + Shash crypto api wrappers to crc32_le function. + +config CRYPTO_CRC32_PCLMUL + tristate "CRC32 PCLMULQDQ hardware acceleration" + depends on X86 + select CRYPTO_HASH + select CRC32 + help + From Intel Westmere and AMD Bulldozer processor with SSE4.2 + and PCLMULQDQ supported, the processor will support + CRC32 PCLMULQDQ implementation using hardware accelerated PCLMULQDQ + instruction. This option will create 'crc32-plcmul' module, + which will enable any routine to use the CRC-32-IEEE 802.3 checksum + and gain better performance as compared with the table implementation. + +config CRYPTO_CRCT10DIF + tristate "CRCT10DIF algorithm" + select CRYPTO_HASH + help + CRC T10 Data Integrity Field computation is being cast as + a crypto transform. This allows for faster crc t10 diff + transforms to be used if they are available. + +config CRYPTO_CRCT10DIF_PCLMUL + tristate "CRCT10DIF PCLMULQDQ hardware acceleration" + depends on X86 && 64BIT && CRC_T10DIF + select CRYPTO_HASH + help + For x86_64 processors with SSE4.2 and PCLMULQDQ supported, + CRC T10 DIF PCLMULQDQ computation can be hardware + accelerated PCLMULQDQ instruction. This option will create + 'crct10dif-plcmul' module, which is faster when computing the + crct10dif checksum as compared with the generic table implementation. + +config CRYPTO_GHASH + tristate "GHASH digest algorithm" + select CRYPTO_GF128MUL + help + GHASH is message digest algorithm for GCM (Galois/Counter Mode). + config CRYPTO_MD4 tristate "MD4 digest algorithm" select CRYPTO_HASH @@ -286,6 +412,15 @@ config CRYPTO_MD5 help MD5 message digest algorithm (RFC1321). +config CRYPTO_MD5_SPARC64 + tristate "MD5 digest algorithm (SPARC64)" + depends on SPARC64 + select CRYPTO_MD5 + select CRYPTO_HASH + help + MD5 message digest algorithm (RFC1321) implemented + using sparc64 crypto instructions, when available. + config CRYPTO_MICHAEL_MIC tristate "Michael MIC keyed digest algorithm" select CRYPTO_HASH @@ -302,11 +437,11 @@ config CRYPTO_RMD128 RIPEMD-128 (ISO/IEC 10118-3:2004). RIPEMD-128 is a 128-bit cryptographic hash function. It should only - to be used as a secure replacement for RIPEMD. For other use cases + be used as a secure replacement for RIPEMD. For other use cases, RIPEMD-160 should be used. Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel. - See <http://home.esat.kuleuven.be/~bosselae/ripemd160.html> + See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html> config CRYPTO_RMD160 tristate "RIPEMD-160 digest algorithm" @@ -323,7 +458,7 @@ config CRYPTO_RMD160 against RIPEMD-160. Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel. - See <http://home.esat.kuleuven.be/~bosselae/ripemd160.html> + See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html> config CRYPTO_RMD256 tristate "RIPEMD-256 digest algorithm" @@ -335,7 +470,7 @@ config CRYPTO_RMD256 (than RIPEMD-128). Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel. - See <http://home.esat.kuleuven.be/~bosselae/ripemd160.html> + See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html> config CRYPTO_RMD320 tristate "RIPEMD-320 digest algorithm" @@ -347,7 +482,7 @@ config CRYPTO_RMD320 (than RIPEMD-160). Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel. - See <http://home.esat.kuleuven.be/~bosselae/ripemd160.html> + See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html> config CRYPTO_SHA1 tristate "SHA1 digest algorithm" @@ -355,6 +490,63 @@ config CRYPTO_SHA1 help SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). +config CRYPTO_SHA1_SSSE3 + tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2)" + depends on X86 && 64BIT + select CRYPTO_SHA1 + select CRYPTO_HASH + help + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented + using Supplemental SSE3 (SSSE3) instructions or Advanced Vector + Extensions (AVX/AVX2), when available. + +config CRYPTO_SHA256_SSSE3 + tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2)" + depends on X86 && 64BIT + select CRYPTO_SHA256 + select CRYPTO_HASH + help + SHA-256 secure hash standard (DFIPS 180-2) implemented + using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector + Extensions version 1 (AVX1), or Advanced Vector Extensions + version 2 (AVX2) instructions, when available. + +config CRYPTO_SHA512_SSSE3 + tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)" + depends on X86 && 64BIT + select CRYPTO_SHA512 + select CRYPTO_HASH + help + SHA-512 secure hash standard (DFIPS 180-2) implemented + using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector + Extensions version 1 (AVX1), or Advanced Vector Extensions + version 2 (AVX2) instructions, when available. + +config CRYPTO_SHA1_SPARC64 + tristate "SHA1 digest algorithm (SPARC64)" + depends on SPARC64 + select CRYPTO_SHA1 + select CRYPTO_HASH + help + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented + using sparc64 crypto instructions, when available. + +config CRYPTO_SHA1_ARM + tristate "SHA1 digest algorithm (ARM-asm)" + depends on ARM + select CRYPTO_SHA1 + select CRYPTO_HASH + help + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented + using optimized ARM assembler. + +config CRYPTO_SHA1_PPC + tristate "SHA1 digest algorithm (powerpc)" + depends on PPC + help + This is the powerpc hardware accelerated implementation of the + SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). + config CRYPTO_SHA256 tristate "SHA224 and SHA256 digest algorithm" select CRYPTO_HASH @@ -367,6 +559,15 @@ config CRYPTO_SHA256 This code also includes SHA-224, a 224 bit hash with 112 bits of security against collision attacks. +config CRYPTO_SHA256_SPARC64 + tristate "SHA224 and SHA256 digest algorithm (SPARC64)" + depends on SPARC64 + select CRYPTO_SHA256 + select CRYPTO_HASH + help + SHA-256 secure hash standard (DFIPS 180-2) implemented + using sparc64 crypto instructions, when available. + config CRYPTO_SHA512 tristate "SHA384 and SHA512 digest algorithms" select CRYPTO_HASH @@ -379,6 +580,15 @@ config CRYPTO_SHA512 This code also includes SHA-384, a 384 bit hash with 192 bits of security against collision attacks. +config CRYPTO_SHA512_SPARC64 + tristate "SHA384 and SHA512 digest algorithm (SPARC64)" + depends on SPARC64 + select CRYPTO_SHA512 + select CRYPTO_HASH + help + SHA-512 secure hash standard (DFIPS 180-2) implemented + using sparc64 crypto instructions, when available. + config CRYPTO_TGR192 tristate "Tiger digest algorithms" select CRYPTO_HASH @@ -402,7 +612,15 @@ config CRYPTO_WP512 Whirlpool will be part of the ISO/IEC 10118-3:2003(E) standard See also: - <http://planeta.terra.com.br/informatica/paulobarreto/WhirlpoolPage.html> + <http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html> + +config CRYPTO_GHASH_CLMUL_NI_INTEL + tristate "GHASH digest algorithm (CLMUL-NI accelerated)" + depends on X86 && 64BIT + select CRYPTO_CRYPTD + help + GHASH is message digest algorithm for GCM (Galois/Counter Mode). + The implementation is accelerated by CLMUL-NI of Intel. comment "Ciphers" @@ -470,6 +688,109 @@ config CRYPTO_AES_X86_64 See <http://csrc.nist.gov/encryption/aes/> for more information. +config CRYPTO_AES_NI_INTEL + tristate "AES cipher algorithms (AES-NI)" + depends on X86 + select CRYPTO_AES_X86_64 if 64BIT + select CRYPTO_AES_586 if !64BIT + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_ALGAPI + select CRYPTO_GLUE_HELPER_X86 if 64BIT + select CRYPTO_LRW + select CRYPTO_XTS + help + Use Intel AES-NI instructions for AES algorithm. + + AES cipher algorithms (FIPS-197). AES uses the Rijndael + algorithm. + + Rijndael appears to be consistently a very good performer in + both hardware and software across a wide range of computing + environments regardless of its use in feedback or non-feedback + modes. Its key setup time is excellent, and its key agility is + good. Rijndael's very low memory requirements make it very well + suited for restricted-space environments, in which it also + demonstrates excellent performance. Rijndael's operations are + among the easiest to defend against power and timing attacks. + + The AES specifies three key sizes: 128, 192 and 256 bits + + See <http://csrc.nist.gov/encryption/aes/> for more information. + + In addition to AES cipher algorithm support, the acceleration + for some popular block cipher mode is supported too, including + ECB, CBC, LRW, PCBC, XTS. The 64 bit version has additional + acceleration for CTR. + +config CRYPTO_AES_SPARC64 + tristate "AES cipher algorithms (SPARC64)" + depends on SPARC64 + select CRYPTO_CRYPTD + select CRYPTO_ALGAPI + help + Use SPARC64 crypto opcodes for AES algorithm. + + AES cipher algorithms (FIPS-197). AES uses the Rijndael + algorithm. + + Rijndael appears to be consistently a very good performer in + both hardware and software across a wide range of computing + environments regardless of its use in feedback or non-feedback + modes. Its key setup time is excellent, and its key agility is + good. Rijndael's very low memory requirements make it very well + suited for restricted-space environments, in which it also + demonstrates excellent performance. Rijndael's operations are + among the easiest to defend against power and timing attacks. + + The AES specifies three key sizes: 128, 192 and 256 bits + + See <http://csrc.nist.gov/encryption/aes/> for more information. + + In addition to AES cipher algorithm support, the acceleration + for some popular block cipher mode is supported too, including + ECB and CBC. + +config CRYPTO_AES_ARM + tristate "AES cipher algorithms (ARM-asm)" + depends on ARM + select CRYPTO_ALGAPI + select CRYPTO_AES + help + Use optimized AES assembler routines for ARM platforms. + + AES cipher algorithms (FIPS-197). AES uses the Rijndael + algorithm. + + Rijndael appears to be consistently a very good performer in + both hardware and software across a wide range of computing + environments regardless of its use in feedback or non-feedback + modes. Its key setup time is excellent, and its key agility is + good. Rijndael's very low memory requirements make it very well + suited for restricted-space environments, in which it also + demonstrates excellent performance. Rijndael's operations are + among the easiest to defend against power and timing attacks. + + The AES specifies three key sizes: 128, 192 and 256 bits + + See <http://csrc.nist.gov/encryption/aes/> for more information. + +config CRYPTO_AES_ARM_BS + tristate "Bit sliced AES using NEON instructions" + depends on ARM && KERNEL_MODE_NEON + select CRYPTO_ALGAPI + select CRYPTO_AES_ARM + select CRYPTO_ABLK_HELPER + help + Use a faster and more secure NEON based implementation of AES in CBC, + CTR and XTS modes + + Bit sliced AES gives around 45% speedup on Cortex-A15 for CTR mode + and for XTS mode encryption, CBC and XTS mode decryption speedup is + around 25%. (CBC encryption speed is not affected by this driver.) + This implementation does not rely on any lookup tables so it is + believed to be invulnerable to cache timing attacks. + config CRYPTO_ANUBIS tristate "Anubis cipher algorithm" select CRYPTO_ALGAPI @@ -481,12 +802,12 @@ config CRYPTO_ANUBIS in the NESSIE competition. See also: - <https://www.cosic.esat.kuleuven.ac.be/nessie/reports/> - <http://planeta.terra.com.br/informatica/paulobarreto/AnubisPage.html> + <https://www.cosic.esat.kuleuven.be/nessie/reports/> + <http://www.larc.usp.br/~pbarreto/AnubisPage.html> config CRYPTO_ARC4 tristate "ARC4 cipher algorithm" - select CRYPTO_ALGAPI + select CRYPTO_BLKCIPHER help ARC4 cipher algorithm. @@ -498,6 +819,7 @@ config CRYPTO_ARC4 config CRYPTO_BLOWFISH tristate "Blowfish cipher algorithm" select CRYPTO_ALGAPI + select CRYPTO_BLOWFISH_COMMON help Blowfish cipher algorithm, by Bruce Schneier. @@ -508,6 +830,30 @@ config CRYPTO_BLOWFISH See also: <http://www.schneier.com/blowfish.html> +config CRYPTO_BLOWFISH_COMMON + tristate + help + Common parts of the Blowfish cipher algorithm shared by the + generic c and the assembler implementations. + + See also: + <http://www.schneier.com/blowfish.html> + +config CRYPTO_BLOWFISH_X86_64 + tristate "Blowfish cipher algorithm (x86_64)" + depends on X86 && 64BIT + select CRYPTO_ALGAPI + select CRYPTO_BLOWFISH_COMMON + help + Blowfish cipher algorithm (x86_64), by Bruce Schneier. + + This is a variable key length cipher which can use keys from 32 + bits to 448 bits in length. It's fast, simple and specifically + designed for use on "large microprocessors". + + See also: + <http://www.schneier.com/blowfish.html> + config CRYPTO_CAMELLIA tristate "Camellia cipher algorithms" depends on CRYPTO @@ -523,26 +869,156 @@ config CRYPTO_CAMELLIA See also: <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html> +config CRYPTO_CAMELLIA_X86_64 + tristate "Camellia cipher algorithm (x86_64)" + depends on X86 && 64BIT + depends on CRYPTO + select CRYPTO_ALGAPI + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_LRW + select CRYPTO_XTS + help + Camellia cipher algorithm module (x86_64). + + Camellia is a symmetric key block cipher developed jointly + at NTT and Mitsubishi Electric Corporation. + + The Camellia specifies three key sizes: 128, 192 and 256 bits. + + See also: + <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html> + +config CRYPTO_CAMELLIA_AESNI_AVX_X86_64 + tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)" + depends on X86 && 64BIT + depends on CRYPTO + select CRYPTO_ALGAPI + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_CAMELLIA_X86_64 + select CRYPTO_LRW + select CRYPTO_XTS + help + Camellia cipher algorithm module (x86_64/AES-NI/AVX). + + Camellia is a symmetric key block cipher developed jointly + at NTT and Mitsubishi Electric Corporation. + + The Camellia specifies three key sizes: 128, 192 and 256 bits. + + See also: + <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html> + +config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 + tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)" + depends on X86 && 64BIT + depends on CRYPTO + select CRYPTO_ALGAPI + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_CAMELLIA_X86_64 + select CRYPTO_CAMELLIA_AESNI_AVX_X86_64 + select CRYPTO_LRW + select CRYPTO_XTS + help + Camellia cipher algorithm module (x86_64/AES-NI/AVX2). + + Camellia is a symmetric key block cipher developed jointly + at NTT and Mitsubishi Electric Corporation. + + The Camellia specifies three key sizes: 128, 192 and 256 bits. + + See also: + <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html> + +config CRYPTO_CAMELLIA_SPARC64 + tristate "Camellia cipher algorithm (SPARC64)" + depends on SPARC64 + depends on CRYPTO + select CRYPTO_ALGAPI + help + Camellia cipher algorithm module (SPARC64). + + Camellia is a symmetric key block cipher developed jointly + at NTT and Mitsubishi Electric Corporation. + + The Camellia specifies three key sizes: 128, 192 and 256 bits. + + See also: + <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html> + +config CRYPTO_CAST_COMMON + tristate + help + Common parts of the CAST cipher algorithms shared by the + generic c and the assembler implementations. + config CRYPTO_CAST5 tristate "CAST5 (CAST-128) cipher algorithm" select CRYPTO_ALGAPI + select CRYPTO_CAST_COMMON + help + The CAST5 encryption algorithm (synonymous with CAST-128) is + described in RFC2144. + +config CRYPTO_CAST5_AVX_X86_64 + tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)" + depends on X86 && 64BIT + select CRYPTO_ALGAPI + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_CAST_COMMON + select CRYPTO_CAST5 help The CAST5 encryption algorithm (synonymous with CAST-128) is described in RFC2144. + This module provides the Cast5 cipher algorithm that processes + sixteen blocks parallel using the AVX instruction set. + config CRYPTO_CAST6 tristate "CAST6 (CAST-256) cipher algorithm" select CRYPTO_ALGAPI + select CRYPTO_CAST_COMMON + help + The CAST6 encryption algorithm (synonymous with CAST-256) is + described in RFC2612. + +config CRYPTO_CAST6_AVX_X86_64 + tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)" + depends on X86 && 64BIT + select CRYPTO_ALGAPI + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_CAST_COMMON + select CRYPTO_CAST6 + select CRYPTO_LRW + select CRYPTO_XTS help The CAST6 encryption algorithm (synonymous with CAST-256) is described in RFC2612. + This module provides the Cast6 cipher algorithm that processes + eight blocks parallel using the AVX instruction set. + config CRYPTO_DES tristate "DES and Triple DES EDE cipher algorithms" select CRYPTO_ALGAPI help DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3). +config CRYPTO_DES_SPARC64 + tristate "DES and Triple DES EDE cipher algorithms (SPARC64)" + depends on SPARC64 + select CRYPTO_ALGAPI + select CRYPTO_DES + help + DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3), + optimized using SPARC64 crypto opcodes. + config CRYPTO_FCRYPT tristate "FCrypt cipher algorithm" select CRYPTO_ALGAPI @@ -561,11 +1037,10 @@ config CRYPTO_KHAZAD on 32-bit processors. Khazad uses an 128 bit key size. See also: - <http://planeta.terra.com.br/informatica/paulobarreto/KhazadPage.html> + <http://www.larc.usp.br/~pbarreto/KhazadPage.html> config CRYPTO_SALSA20 - tristate "Salsa20 stream cipher algorithm (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Salsa20 stream cipher algorithm" select CRYPTO_BLKCIPHER help Salsa20 stream cipher algorithm. @@ -577,9 +1052,8 @@ config CRYPTO_SALSA20 Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html> config CRYPTO_SALSA20_586 - tristate "Salsa20 stream cipher algorithm (i586) (EXPERIMENTAL)" + tristate "Salsa20 stream cipher algorithm (i586)" depends on (X86 || UML_X86) && !64BIT - depends on EXPERIMENTAL select CRYPTO_BLKCIPHER help Salsa20 stream cipher algorithm. @@ -591,9 +1065,8 @@ config CRYPTO_SALSA20_586 Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html> config CRYPTO_SALSA20_X86_64 - tristate "Salsa20 stream cipher algorithm (x86_64) (EXPERIMENTAL)" + tristate "Salsa20 stream cipher algorithm (x86_64)" depends on (X86 || UML_X86) && 64BIT - depends on EXPERIMENTAL select CRYPTO_BLKCIPHER help Salsa20 stream cipher algorithm. @@ -631,6 +1104,95 @@ config CRYPTO_SERPENT See also: <http://www.cl.cam.ac.uk/~rja14/serpent.html> +config CRYPTO_SERPENT_SSE2_X86_64 + tristate "Serpent cipher algorithm (x86_64/SSE2)" + depends on X86 && 64BIT + select CRYPTO_ALGAPI + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_SERPENT + select CRYPTO_LRW + select CRYPTO_XTS + help + Serpent cipher algorithm, by Anderson, Biham & Knudsen. + + Keys are allowed to be from 0 to 256 bits in length, in steps + of 8 bits. + + This module provides Serpent cipher algorithm that processes eigth + blocks parallel using SSE2 instruction set. + + See also: + <http://www.cl.cam.ac.uk/~rja14/serpent.html> + +config CRYPTO_SERPENT_SSE2_586 + tristate "Serpent cipher algorithm (i586/SSE2)" + depends on X86 && !64BIT + select CRYPTO_ALGAPI + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_SERPENT + select CRYPTO_LRW + select CRYPTO_XTS + help + Serpent cipher algorithm, by Anderson, Biham & Knudsen. + + Keys are allowed to be from 0 to 256 bits in length, in steps + of 8 bits. + + This module provides Serpent cipher algorithm that processes four + blocks parallel using SSE2 instruction set. + + See also: + <http://www.cl.cam.ac.uk/~rja14/serpent.html> + +config CRYPTO_SERPENT_AVX_X86_64 + tristate "Serpent cipher algorithm (x86_64/AVX)" + depends on X86 && 64BIT + select CRYPTO_ALGAPI + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_SERPENT + select CRYPTO_LRW + select CRYPTO_XTS + help + Serpent cipher algorithm, by Anderson, Biham & Knudsen. + + Keys are allowed to be from 0 to 256 bits in length, in steps + of 8 bits. + + This module provides the Serpent cipher algorithm that processes + eight blocks parallel using the AVX instruction set. + + See also: + <http://www.cl.cam.ac.uk/~rja14/serpent.html> + +config CRYPTO_SERPENT_AVX2_X86_64 + tristate "Serpent cipher algorithm (x86_64/AVX2)" + depends on X86 && 64BIT + select CRYPTO_ALGAPI + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_SERPENT + select CRYPTO_SERPENT_AVX_X86_64 + select CRYPTO_LRW + select CRYPTO_XTS + help + Serpent cipher algorithm, by Anderson, Biham & Knudsen. + + Keys are allowed to be from 0 to 256 bits in length, in steps + of 8 bits. + + This module provides Serpent cipher algorithm that processes 16 + blocks parallel using AVX2 instruction set. + + See also: + <http://www.cl.cam.ac.uk/~rja14/serpent.html> + config CRYPTO_TEA tristate "TEA, XTEA and XETA cipher algorithms" select CRYPTO_ALGAPI @@ -701,6 +1263,55 @@ config CRYPTO_TWOFISH_X86_64 See also: <http://www.schneier.com/twofish.html> +config CRYPTO_TWOFISH_X86_64_3WAY + tristate "Twofish cipher algorithm (x86_64, 3-way parallel)" + depends on X86 && 64BIT + select CRYPTO_ALGAPI + select CRYPTO_TWOFISH_COMMON + select CRYPTO_TWOFISH_X86_64 + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_LRW + select CRYPTO_XTS + help + Twofish cipher algorithm (x86_64, 3-way parallel). + + Twofish was submitted as an AES (Advanced Encryption Standard) + candidate cipher by researchers at CounterPane Systems. It is a + 16 round block cipher supporting key sizes of 128, 192, and 256 + bits. + + This module provides Twofish cipher algorithm that processes three + blocks parallel, utilizing resources of out-of-order CPUs better. + + See also: + <http://www.schneier.com/twofish.html> + +config CRYPTO_TWOFISH_AVX_X86_64 + tristate "Twofish cipher algorithm (x86_64/AVX)" + depends on X86 && 64BIT + select CRYPTO_ALGAPI + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_TWOFISH_COMMON + select CRYPTO_TWOFISH_X86_64 + select CRYPTO_TWOFISH_X86_64_3WAY + select CRYPTO_LRW + select CRYPTO_XTS + help + Twofish cipher algorithm (x86_64/AVX). + + Twofish was submitted as an AES (Advanced Encryption Standard) + candidate cipher by researchers at CounterPane Systems. It is a + 16 round block cipher supporting key sizes of 128, 192, and 256 + bits. + + This module provides the Twofish cipher algorithm that processes + eight blocks parallel using the AVX Instruction Set. + + See also: + <http://www.schneier.com/twofish.html> + comment "Compression" config CRYPTO_DEFLATE @@ -714,6 +1325,15 @@ config CRYPTO_DEFLATE You will most probably want this if using IPSec. +config CRYPTO_ZLIB + tristate "Zlib compression algorithm" + select CRYPTO_PCOMP + select ZLIB_INFLATE + select ZLIB_DEFLATE + select NLATTR + help + This is the zlib algorithm. + config CRYPTO_LZO tristate "LZO compression algorithm" select CRYPTO_ALGAPI @@ -722,18 +1342,69 @@ config CRYPTO_LZO help This is the LZO algorithm. +config CRYPTO_842 + tristate "842 compression algorithm" + depends on CRYPTO_DEV_NX_COMPRESS + # 842 uses lzo if the hardware becomes unavailable + select LZO_COMPRESS + select LZO_DECOMPRESS + help + This is the 842 algorithm. + +config CRYPTO_LZ4 + tristate "LZ4 compression algorithm" + select CRYPTO_ALGAPI + select LZ4_COMPRESS + select LZ4_DECOMPRESS + help + This is the LZ4 algorithm. + +config CRYPTO_LZ4HC + tristate "LZ4HC compression algorithm" + select CRYPTO_ALGAPI + select LZ4HC_COMPRESS + select LZ4_DECOMPRESS + help + This is the LZ4 high compression mode algorithm. + comment "Random Number Generation" config CRYPTO_ANSI_CPRNG tristate "Pseudo Random Number Generation for Cryptographic modules" + default m select CRYPTO_AES select CRYPTO_RNG - select CRYPTO_FIPS help This option enables the generic pseudo random number generator for cryptographic modules. Uses the Algorithm specified in - ANSI X9.31 A.2.4 + ANSI X9.31 A.2.4. Note that this option must be enabled if + CRYPTO_FIPS is selected + +config CRYPTO_USER_API + tristate + +config CRYPTO_USER_API_HASH + tristate "User-space interface for hash algorithms" + depends on NET + select CRYPTO_HASH + select CRYPTO_USER_API + help + This option enables the user-spaces interface for hash + algorithms. + +config CRYPTO_USER_API_SKCIPHER + tristate "User-space interface for symmetric key cipher algorithms" + depends on NET + select CRYPTO_BLKCIPHER + select CRYPTO_USER_API + help + This option enables the user-spaces interface for symmetric + key cipher algorithms. + +config CRYPTO_HASH_INFO + bool source "drivers/crypto/Kconfig" +source crypto/asymmetric_keys/Kconfig endif # if CRYPTO |