diff options
Diffstat (limited to 'crypto/Kconfig')
| -rw-r--r-- | crypto/Kconfig | 168 |
1 files changed, 146 insertions, 22 deletions
diff --git a/crypto/Kconfig b/crypto/Kconfig index 05c0ce52f96..ce4012a5878 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -174,9 +174,8 @@ config CRYPTO_TEST help Quick & dirty crypto test module. -config CRYPTO_ABLK_HELPER_X86 +config CRYPTO_ABLK_HELPER tristate - depends on X86 select CRYPTO_CRYPTD config CRYPTO_GLUE_HELPER_X86 @@ -198,6 +197,7 @@ config CRYPTO_GCM select CRYPTO_CTR select CRYPTO_AEAD select CRYPTO_GHASH + select CRYPTO_NULL help Support for Galois/Counter Mode (GCM) and Galois Message Authentication Code (GMAC). Required for IPSec. @@ -282,6 +282,17 @@ config CRYPTO_XTS comment "Hash modes" +config CRYPTO_CMAC + tristate "CMAC support" + select CRYPTO_HASH + select CRYPTO_MANAGER + help + Cipher-based Message Authentication Code (CMAC) specified by + The National Institute of Standards and Technology (NIST). + + https://tools.ietf.org/html/rfc4493 + http://csrc.nist.gov/publications/nistpubs/800-38B/SP_800-38B.pdf + config CRYPTO_HMAC tristate "HMAC support" select CRYPTO_HASH @@ -322,19 +333,9 @@ config CRYPTO_CRC32C by iSCSI for header and data digests and by others. See Castagnoli93. Module will be crc32c. -config CRYPTO_CRC32C_X86_64 - bool - depends on X86 && 64BIT - select CRYPTO_HASH - help - In Intel processor with SSE4.2 supported, the processor will - support CRC32C calculation using hardware accelerated CRC32 - instruction optimized with PCLMULQDQ instruction when available. - config CRYPTO_CRC32C_INTEL tristate "CRC32c INTEL hardware acceleration" depends on X86 - select CRYPTO_CRC32C_X86_64 if 64BIT select CRYPTO_HASH help In Intel processor with SSE4.2 supported, the processor will @@ -374,6 +375,25 @@ config CRYPTO_CRC32_PCLMUL which will enable any routine to use the CRC-32-IEEE 802.3 checksum and gain better performance as compared with the table implementation. +config CRYPTO_CRCT10DIF + tristate "CRCT10DIF algorithm" + select CRYPTO_HASH + help + CRC T10 Data Integrity Field computation is being cast as + a crypto transform. This allows for faster crc t10 diff + transforms to be used if they are available. + +config CRYPTO_CRCT10DIF_PCLMUL + tristate "CRCT10DIF PCLMULQDQ hardware acceleration" + depends on X86 && 64BIT && CRC_T10DIF + select CRYPTO_HASH + help + For x86_64 processors with SSE4.2 and PCLMULQDQ supported, + CRC T10 DIF PCLMULQDQ computation can be hardware + accelerated PCLMULQDQ instruction. This option will create + 'crct10dif-plcmul' module, which is faster when computing the + crct10dif checksum as compared with the generic table implementation. + config CRYPTO_GHASH tristate "GHASH digest algorithm" select CRYPTO_GF128MUL @@ -471,14 +491,36 @@ config CRYPTO_SHA1 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2). config CRYPTO_SHA1_SSSE3 - tristate "SHA1 digest algorithm (SSSE3/AVX)" + tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2)" depends on X86 && 64BIT select CRYPTO_SHA1 select CRYPTO_HASH help SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented using Supplemental SSE3 (SSSE3) instructions or Advanced Vector - Extensions (AVX), when available. + Extensions (AVX/AVX2), when available. + +config CRYPTO_SHA256_SSSE3 + tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2)" + depends on X86 && 64BIT + select CRYPTO_SHA256 + select CRYPTO_HASH + help + SHA-256 secure hash standard (DFIPS 180-2) implemented + using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector + Extensions version 1 (AVX1), or Advanced Vector Extensions + version 2 (AVX2) instructions, when available. + +config CRYPTO_SHA512_SSSE3 + tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)" + depends on X86 && 64BIT + select CRYPTO_SHA512 + select CRYPTO_HASH + help + SHA-512 secure hash standard (DFIPS 180-2) implemented + using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector + Extensions version 1 (AVX1), or Advanced Vector Extensions + version 2 (AVX2) instructions, when available. config CRYPTO_SHA1_SPARC64 tristate "SHA1 digest algorithm (SPARC64)" @@ -652,8 +694,9 @@ config CRYPTO_AES_NI_INTEL select CRYPTO_AES_X86_64 if 64BIT select CRYPTO_AES_586 if !64BIT select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_ALGAPI + select CRYPTO_GLUE_HELPER_X86 if 64BIT select CRYPTO_LRW select CRYPTO_XTS help @@ -732,6 +775,22 @@ config CRYPTO_AES_ARM See <http://csrc.nist.gov/encryption/aes/> for more information. +config CRYPTO_AES_ARM_BS + tristate "Bit sliced AES using NEON instructions" + depends on ARM && KERNEL_MODE_NEON + select CRYPTO_ALGAPI + select CRYPTO_AES_ARM + select CRYPTO_ABLK_HELPER + help + Use a faster and more secure NEON based implementation of AES in CBC, + CTR and XTS modes + + Bit sliced AES gives around 45% speedup on Cortex-A15 for CTR mode + and for XTS mode encryption, CBC and XTS mode decryption speedup is + around 25%. (CBC encryption speed is not affected by this driver.) + This implementation does not rely on any lookup tables so it is + believed to be invulnerable to cache timing attacks. + config CRYPTO_ANUBIS tristate "Anubis cipher algorithm" select CRYPTO_ALGAPI @@ -835,7 +894,7 @@ config CRYPTO_CAMELLIA_AESNI_AVX_X86_64 depends on CRYPTO select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_CAMELLIA_X86_64 select CRYPTO_LRW @@ -851,6 +910,29 @@ config CRYPTO_CAMELLIA_AESNI_AVX_X86_64 See also: <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html> +config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 + tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)" + depends on X86 && 64BIT + depends on CRYPTO + select CRYPTO_ALGAPI + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_CAMELLIA_X86_64 + select CRYPTO_CAMELLIA_AESNI_AVX_X86_64 + select CRYPTO_LRW + select CRYPTO_XTS + help + Camellia cipher algorithm module (x86_64/AES-NI/AVX2). + + Camellia is a symmetric key block cipher developed jointly + at NTT and Mitsubishi Electric Corporation. + + The Camellia specifies three key sizes: 128, 192 and 256 bits. + + See also: + <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html> + config CRYPTO_CAMELLIA_SPARC64 tristate "Camellia cipher algorithm (SPARC64)" depends on SPARC64 @@ -886,7 +968,7 @@ config CRYPTO_CAST5_AVX_X86_64 depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_CAST_COMMON select CRYPTO_CAST5 help @@ -909,7 +991,7 @@ config CRYPTO_CAST6_AVX_X86_64 depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_CAST_COMMON select CRYPTO_CAST6 @@ -1027,7 +1109,7 @@ config CRYPTO_SERPENT_SSE2_X86_64 depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_SERPENT select CRYPTO_LRW @@ -1049,7 +1131,7 @@ config CRYPTO_SERPENT_SSE2_586 depends on X86 && !64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_SERPENT select CRYPTO_LRW @@ -1071,7 +1153,7 @@ config CRYPTO_SERPENT_AVX_X86_64 depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_SERPENT select CRYPTO_LRW @@ -1088,6 +1170,29 @@ config CRYPTO_SERPENT_AVX_X86_64 See also: <http://www.cl.cam.ac.uk/~rja14/serpent.html> +config CRYPTO_SERPENT_AVX2_X86_64 + tristate "Serpent cipher algorithm (x86_64/AVX2)" + depends on X86 && 64BIT + select CRYPTO_ALGAPI + select CRYPTO_CRYPTD + select CRYPTO_ABLK_HELPER + select CRYPTO_GLUE_HELPER_X86 + select CRYPTO_SERPENT + select CRYPTO_SERPENT_AVX_X86_64 + select CRYPTO_LRW + select CRYPTO_XTS + help + Serpent cipher algorithm, by Anderson, Biham & Knudsen. + + Keys are allowed to be from 0 to 256 bits in length, in steps + of 8 bits. + + This module provides Serpent cipher algorithm that processes 16 + blocks parallel using AVX2 instruction set. + + See also: + <http://www.cl.cam.ac.uk/~rja14/serpent.html> + config CRYPTO_TEA tristate "TEA, XTEA and XETA cipher algorithms" select CRYPTO_ALGAPI @@ -1186,7 +1291,7 @@ config CRYPTO_TWOFISH_AVX_X86_64 depends on X86 && 64BIT select CRYPTO_ALGAPI select CRYPTO_CRYPTD - select CRYPTO_ABLK_HELPER_X86 + select CRYPTO_ABLK_HELPER select CRYPTO_GLUE_HELPER_X86 select CRYPTO_TWOFISH_COMMON select CRYPTO_TWOFISH_X86_64 @@ -1246,6 +1351,22 @@ config CRYPTO_842 help This is the 842 algorithm. +config CRYPTO_LZ4 + tristate "LZ4 compression algorithm" + select CRYPTO_ALGAPI + select LZ4_COMPRESS + select LZ4_DECOMPRESS + help + This is the LZ4 algorithm. + +config CRYPTO_LZ4HC + tristate "LZ4HC compression algorithm" + select CRYPTO_ALGAPI + select LZ4HC_COMPRESS + select LZ4_DECOMPRESS + help + This is the LZ4 high compression mode algorithm. + comment "Random Number Generation" config CRYPTO_ANSI_CPRNG @@ -1280,6 +1401,9 @@ config CRYPTO_USER_API_SKCIPHER This option enables the user-spaces interface for symmetric key cipher algorithms. +config CRYPTO_HASH_INFO + bool + source "drivers/crypto/Kconfig" source crypto/asymmetric_keys/Kconfig |