diff options
Diffstat (limited to 'arch')
47 files changed, 349 insertions, 3221 deletions
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 59594cf1599..ea92fd69529 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -19,6 +19,19 @@ reg = <0x30000000 0x4000000>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + xti: xti { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "xti"; + #clock-cells = <0>; + }; + }; + serial@50000000 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index e6555bdd81b..955e4a4f8c3 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/s3c2443.h> #include "s3c24xx.dtsi" #include "s3c2416-pinctrl.dtsi" @@ -28,26 +29,53 @@ compatible = "samsung,s3c2416-irq"; }; + clocks: clock-controller@0x4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + pinctrl@56000000 { compatible = "samsung,s3c2416-pinctrl"; }; + timer@51000000 { + clocks = <&clocks PCLK_PWM>; + clock-names = "timers"; + }; + serial@50000000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; }; serial@50004000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; }; serial@50008000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; }; serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>, + <&clocks SCLK_UART>; status = "disabled"; }; @@ -55,6 +83,10 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>, + <&clocks MUX_HSMMC0>; status = "disabled"; }; @@ -62,18 +94,28 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>, + <&clocks MUX_HSMMC1>; status = "disabled"; }; watchdog@53000000 { interrupts = <1 9 27 3>; + clocks = <&clocks PCLK_WDT>; + clock-names = "watchdog"; }; rtc@57000000 { compatible = "samsung,s3c2416-rtc"; + clocks = <&clocks PCLK_RTC>; + clock-names = "rtc"; }; i2c@54000000 { compatible = "samsung,s3c2440-i2c"; + clocks = <&clocks PCLK_I2C0>; + clock-names = "i2c"; }; }; diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 40cf50b9940..22d149bcfcc 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -18,6 +18,18 @@ config PLAT_S3C24XX help Base platform code for any Samsung S3C24XX device +config S3C2410_COMMON_CLK + bool + help + Build the s3c2410 clock driver based on the common clock framework. + +config S3C2410_COMMON_DCLK + bool + select REGMAP_MMIO + help + Temporary symbol to build the dclk driver based on the common clock + framework. + menu "SAMSUNG S3C24XX SoCs Support" comment "S3C24XX SoCs" @@ -25,9 +37,10 @@ comment "S3C24XX SoCs" config CPU_S3C2410 bool "SAMSUNG S3C2410" default y + select COMMON_CLK select CPU_ARM920T select CPU_LLSERIAL_S3C2410 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM @@ -38,8 +51,10 @@ config CPU_S3C2410 config CPU_S3C2412 bool "SAMSUNG S3C2412" + select COMMON_CLK select CPU_ARM926T select CPU_LLSERIAL_S3C2440 + select S3C2412_COMMON_CLK select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM help @@ -47,20 +62,21 @@ config CPU_S3C2412 config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" + select COMMON_CLK select CPU_ARM926T select CPU_LLSERIAL_S3C2440 select S3C2416_PM if PM - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2416 SoC from the S3C24XX line config CPU_S3C2440 bool "SAMSUNG S3C2440" + select COMMON_CLK select CPU_ARM920T select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA help @@ -68,9 +84,10 @@ config CPU_S3C2440 config CPU_S3C2442 bool "SAMSUNG S3C2442" + select COMMON_CLK select CPU_ARM920T select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM help @@ -83,27 +100,16 @@ config CPU_S3C244X config CPU_S3C2443 bool "SAMSUNG S3C2443" + select COMMON_CLK select CPU_ARM920T select CPU_LLSERIAL_S3C2440 - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2443 SoC from the S3C24XX line # common code -config S3C2410_CLOCK - bool - help - Clock code for the S3C2410, and similar processors which - is currently includes the S3C2410, S3C2440, S3C2442. - -config S3C24XX_DCLK - bool - help - Clock code for supporting DCLK/CLKOUT on S3C24XX architectures - config S3C24XX_SMDK bool help @@ -258,8 +264,8 @@ config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ - select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -340,7 +346,7 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" select MACH_BAST_IDE - select S3C24XX_DCLK + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -359,6 +365,11 @@ config S3C2412_PM_SLEEP if CPU_S3C2412 +config S3C2412_COMMON_CLK + bool + help + Build the s3c2412 clock driver based on the common clock framework. + config CPU_S3C2412_ONLY bool depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ @@ -519,8 +530,8 @@ comment "S3C2440 Boards" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select HAVE_PATA_PLATFORM + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help @@ -558,9 +569,9 @@ config MACH_NEXCODER_2440 config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND select S3C_DEV_USB_HOST @@ -629,9 +640,9 @@ config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM + select S3C2410_COMMON_DCLK if COMMON_CLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 - select S3C24XX_DCLK select S3C24XX_PWM select S3C_DEV_NAND help @@ -641,11 +652,11 @@ endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 -config S3C2443_COMMON +config S3C2443_COMMON_CLK bool help - Common code for the S3C2443 and similar processors, which includes - the S3C2416 and S3C2450. + Temporary symbol to build the clock driver based on the common clock + framework. config S3C2443_DMA bool diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 7f54e5b954c..2235d0d3b38 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -21,22 +21,22 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o -obj-$(CONFIG_CPU_S3C2443) += s3c2443.o clock-s3c2443.o +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o # PM @@ -44,16 +44,13 @@ obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o # common code -obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_S3C24XX_DMA) += dma.o -obj-$(CONFIG_S3C2410_CLOCK) += clock-s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o -obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o # diff --git a/arch/arm/mach-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c deleted file mode 100644 index 1edd9b2369c..00000000000 --- a/arch/arm/mach-s3c24xx/clock-dclk.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (c) 2004-2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24XX - definitions for DCLK and CLKOUT registers - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* clocks that could be registered by external code */ - -static int s3c24xx_dclk_enable(struct clk *clk, int enable) -{ - unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (enable) - dclkcon |= clk->ctrlbit; - else - dclkcon &= ~clk->ctrlbit; - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} - -static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long dclkcon; - unsigned int uclk; - - if (parent == &clk_upll) - uclk = 1; - else if (parent == &clk_p) - uclk = 0; - else - return -EINVAL; - - clk->parent = parent; - - dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; - } else { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; - } - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} -static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate) -{ - unsigned long div; - - if ((rate == 0) || !clk->parent) - return 0; - - div = clk_get_rate(clk->parent) / rate; - if (div < 2) - div = 2; - else if (div > 16) - div = 16; - - return div; -} - -static unsigned long s3c24xx_round_dclk_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return 0; - - return clk_get_rate(clk->parent) / div; -} - -static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate) -{ - unsigned long mask, data, div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return -EINVAL; - - if (clk == &s3c24xx_dclk0) { - mask = S3C2410_DCLKCON_DCLK0_DIV_MASK | - S3C2410_DCLKCON_DCLK0_CMP_MASK; - data = S3C2410_DCLKCON_DCLK0_DIV(div) | - S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2); - } else if (clk == &s3c24xx_dclk1) { - mask = S3C2410_DCLKCON_DCLK1_DIV_MASK | - S3C2410_DCLKCON_DCLK1_CMP_MASK; - data = S3C2410_DCLKCON_DCLK1_DIV(div) | - S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2); - } else - return -EINVAL; - - clk->rate = clk_get_rate(clk->parent) / div; - __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data), - S3C24XX_DCLKCON); - return clk->rate; -} -static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long mask; - unsigned long source; - - /* calculate the MISCCR setting for the clock */ - - if (parent == &clk_mpll) - source = S3C2410_MISCCR_CLK0_MPLL; - else if (parent == &clk_upll) - source = S3C2410_MISCCR_CLK0_UPLL; - else if (parent == &clk_f) - source = S3C2410_MISCCR_CLK0_FCLK; - else if (parent == &clk_h) - source = S3C2410_MISCCR_CLK0_HCLK; - else if (parent == &clk_p) - source = S3C2410_MISCCR_CLK0_PCLK; - else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) - source = S3C2410_MISCCR_CLK0_DCLK0; - else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) - source = S3C2410_MISCCR_CLK0_DCLK0; - else - return -EINVAL; - - clk->parent = parent; - - if (clk == &s3c24xx_clkout0) - mask = S3C2410_MISCCR_CLK0_MASK; - else { - source <<= 4; - mask = S3C2410_MISCCR_CLK1_MASK; - } - - s3c2410_modify_misccr(mask, source); - return 0; -} - -/* external clock definitions */ - -static struct clk_ops dclk_ops = { - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, -}; - -struct clk s3c24xx_dclk0 = { - .name = "dclk0", - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -struct clk s3c24xx_dclk1 = { - .name = "dclk1", - .ctrlbit = S3C2410_DCLKCON_DCLK1EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -static struct clk_ops clkout_ops = { - .set_parent = s3c24xx_clkout_setparent, -}; - -struct clk s3c24xx_clkout0 = { - .name = "clkout0", - .ops = &clkout_ops, -}; - -struct clk s3c24xx_clkout1 = { - .name = "clkout1", - .ops = &clkout_ops, -}; diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c deleted file mode 100644 index d1afcf9252d..00000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410,S3C2440,S3C2442 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -int s3c2410_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - /* ensure none of the special function bits set */ - clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2410_upll_enable(struct clk *clk, int enable) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long orig = clkslow; - - if (enable) - clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; - else - clkslow |= S3C2410_CLKSLOW_UCLK_OFF; - - __raw_writel(clkslow, S3C2410_CLKSLOW); - - /* if we started the UPLL, then allow to settle */ - - if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) - udelay(200); - - return 0; -} - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SPI, - } -}; - -static struct clk clk_lcd = { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC, -}; - -static struct clk clk_gpio = { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO, -}; - -static struct clk clk_usb_host = { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH, -}; - -static struct clk clk_usb_device = { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD, -}; - -static struct clk clk_timers = { - .name = "timers", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT, -}; - -struct clk s3c24xx_clk_uart0 = { - .name = "uart", - .devname = "s3c2410-uart.0", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0, -}; - -struct clk s3c24xx_clk_uart1 = { - .name = "uart", - .devname = "s3c2410-uart.1", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1, -}; - -struct clk s3c24xx_clk_uart2 = { - .name = "uart", - .devname = "s3c2410-uart.2", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2, -}; - -static struct clk clk_rtc = { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC, -}; - -static struct clk clk_watchdog = { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, -}; - -static struct clk clk_usb_bus_host = { - .name = "usb-bus-host", - .parent = &clk_usb_bus, -}; - -static struct clk clk_usb_bus_gadget = { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, -}; - -static struct clk *init_clocks[] = { - &clk_lcd, - &clk_gpio, - &clk_usb_host, - &clk_usb_device, - &clk_timers, - &s3c24xx_clk_uart0, - &s3c24xx_clk_uart1, - &s3c24xx_clk_uart2, - &clk_rtc, - &clk_watchdog, - &clk_usb_bus_host, - &clk_usb_bus_gadget, -}; - -/* s3c2410_baseclk_add() - * - * Add all the clocks used by the s3c2410 or compatible CPUs - * such as the S3C2440 and S3C2442. - * - * We cannot use a system device as we are needed before any - * of the init-calls that initialise the devices are actually - * done. -*/ - -int __init s3c2410_baseclk_add(void) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - struct clk *xtal; - int ret; - int ptr; - - clk_upll.enable = s3c2410_upll_enable; - - if (s3c24xx_register_clock(&clk_usb_bus) < 0) - printk(KERN_ERR "failed to register usb bus clock\n"); - - /* register clocks from clock array */ - - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) { - struct clk *clkp = init_clocks[ptr]; - - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is acti |