aboutsummaryrefslogtreecommitdiff
path: root/arch/x86_64/pci/mmconfig.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86_64/pci/mmconfig.c')
-rw-r--r--arch/x86_64/pci/mmconfig.c243
1 files changed, 0 insertions, 243 deletions
diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c
deleted file mode 100644
index 7732f4254d2..00000000000
--- a/arch/x86_64/pci/mmconfig.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * mmconfig.c - Low-level direct PCI config space access via MMCONFIG
- *
- * This is an 64bit optimized version that always keeps the full mmconfig
- * space mapped. This allows lockless config space operation.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <linux/bitmap.h>
-#include <asm/e820.h>
-
-#include "pci.h"
-
-/* aperture is up to 256MB but BIOS may reserve less */
-#define MMCONFIG_APER_MIN (2 * 1024*1024)
-#define MMCONFIG_APER_MAX (256 * 1024*1024)
-
-/* Verify the first 16 busses. We assume that systems with more busses
- get MCFG right. */
-#define MAX_CHECK_BUS 16
-
-static DECLARE_BITMAP(fallback_slots, 32*MAX_CHECK_BUS);
-
-/* Static virtual mapping of the MMCONFIG aperture */
-struct mmcfg_virt {
- struct acpi_table_mcfg_config *cfg;
- char __iomem *virt;
-};
-static struct mmcfg_virt *pci_mmcfg_virt;
-
-static char __iomem *get_virt(unsigned int seg, unsigned bus)
-{
- int cfg_num = -1;
- struct acpi_table_mcfg_config *cfg;
-
- while (1) {
- ++cfg_num;
- if (cfg_num >= pci_mmcfg_config_num)
- break;
- cfg = pci_mmcfg_virt[cfg_num].cfg;
- if (cfg->pci_segment_group_number != seg)
- continue;
- if ((cfg->start_bus_number <= bus) &&
- (cfg->end_bus_number >= bus))
- return pci_mmcfg_virt[cfg_num].virt;
- }
-
- /* Handle more broken MCFG tables on Asus etc.
- They only contain a single entry for bus 0-0. Assume
- this applies to all busses. */
- cfg = &pci_mmcfg_config[0];
- if (pci_mmcfg_config_num == 1 &&
- cfg->pci_segment_group_number == 0 &&
- (cfg->start_bus_number | cfg->end_bus_number) == 0)
- return pci_mmcfg_virt[0].virt;
-
- /* Fall back to type 0 */
- return NULL;
-}
-
-static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
-{
- char __iomem *addr;
- if (seg == 0 && bus < MAX_CHECK_BUS &&
- test_bit(32*bus + PCI_SLOT(devfn), fallback_slots))
- return NULL;
- addr = get_virt(seg, bus);
- if (!addr)
- return NULL;
- return addr + ((bus << 20) | (devfn << 12));
-}
-
-static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 *value)
-{
- char __iomem *addr;
-
- /* Why do we have this when nobody checks it. How about a BUG()!? -AK */
- if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) {
- *value = -1;
- return -EINVAL;
- }
-
- addr = pci_dev_base(seg, bus, devfn);
- if (!addr)
- return pci_conf1_read(seg,bus,devfn,reg,len,value);
-
- switch (len) {
- case 1:
- *value = readb(addr + reg);
- break;
- case 2:
- *value = readw(addr + reg);
- break;
- case 4:
- *value = readl(addr + reg);
- break;
- }
-
- return 0;
-}
-
-static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 value)
-{
- char __iomem *addr;
-
- /* Why do we have this when nobody checks it. How about a BUG()!? -AK */
- if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
- return -EINVAL;
-
- addr = pci_dev_base(seg, bus, devfn);
- if (!addr)
- return pci_conf1_write(seg,bus,devfn,reg,len,value);
-
- switch (len) {
- case 1:
- writeb(value, addr + reg);
- break;
- case 2:
- writew(value, addr + reg);
- break;
- case 4:
- writel(value, addr + reg);
- break;
- }
-
- return 0;
-}
-
-static struct pci_raw_ops pci_mmcfg = {
- .read = pci_mmcfg_read,
- .write = pci_mmcfg_write,
-};
-
-/* K8 systems have some devices (typically in the builtin northbridge)
- that are only accessible using type1
- Normally this can be expressed in the MCFG by not listing them
- and assigning suitable _SEGs, but this isn't implemented in some BIOS.
- Instead try to discover all devices on bus 0 that are unreachable using MM
- and fallback for them. */
-static __init void unreachable_devices(void)
-{
- int i, k;
- /* Use the max bus number from ACPI here? */
- for (k = 0; k < MAX_CHECK_BUS; k++) {
- for (i = 0; i < 32; i++) {
- u32 val1;
- char __iomem *addr;
-
- pci_conf1_read(0, k, PCI_DEVFN(i,0), 0, 4, &val1);
- if (val1 == 0xffffffff)
- continue;
- addr = pci_dev_base(0, k, PCI_DEVFN(i, 0));
- if (addr == NULL|| readl(addr) != val1) {
- set_bit(i + 32*k, fallback_slots);
- printk(KERN_NOTICE "PCI: No mmconfig possible"
- " on device %02x:%02x\n", k, i);
- }
- }
- }
-}
-
-static __init void pci_mmcfg_insert_resources(void)
-{
-#define PCI_MMCFG_RESOURCE_NAME_LEN 19
- int i;
- struct resource *res;
- char *names;
- unsigned num_buses;
-
- res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res),
- pci_mmcfg_config_num, GFP_KERNEL);
-
- if (!res) {
- printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n");
- return;
- }
-
- names = (void *)&res[pci_mmcfg_config_num];
- for (i = 0; i < pci_mmcfg_config_num; i++, res++) {
- num_buses = pci_mmcfg_config[i].end_bus_number -
- pci_mmcfg_config[i].start_bus_number + 1;
- res->name = names;
- snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
- pci_mmcfg_config[i].pci_segment_group_number);
- res->start = pci_mmcfg_config[i].base_address;
- res->end = res->start + (num_buses << 20) - 1;
- res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
- insert_resource(&iomem_resource, res);
- names += PCI_MMCFG_RESOURCE_NAME_LEN;
- }
-}
-
-void __init pci_mmcfg_init(int type)
-{
- int i;
-
- if ((pci_probe & PCI_PROBE_MMCONF) == 0)
- return;
-
- acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
- if ((pci_mmcfg_config_num == 0) ||
- (pci_mmcfg_config == NULL) ||
- (pci_mmcfg_config[0].base_address == 0))
- return;
-
- /* Only do this check when type 1 works. If it doesn't work
- assume we run on a Mac and always use MCFG */
- if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
- pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
- E820_RESERVED)) {
- printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
- pci_mmcfg_config[0].base_address);
- printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
- return;
- }
-
- pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL);
- if (pci_mmcfg_virt == NULL) {
- printk("PCI: Can not allocate memory for mmconfig structures\n");
- return;
- }
- for (i = 0; i < pci_mmcfg_config_num; ++i) {
- pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
- pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address,
- MMCONFIG_APER_MAX);
- if (!pci_mmcfg_virt[i].virt) {
- printk("PCI: Cannot map mmconfig aperture for segment %d\n",
- pci_mmcfg_config[i].pci_segment_group_number);
- return;
- }
- printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address);
- }
-
- unreachable_devices();
- pci_mmcfg_insert_resources();
-
- raw_pci_ops = &pci_mmcfg;
- pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
-}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-19 06:59:19 +0000