diff options
Diffstat (limited to 'arch/x86')
35 files changed, 2124 insertions, 490 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 0d7cdbbfc1e..44d4f2130d0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1689,6 +1689,14 @@ config DMAR_FLOPPY_WA workaround will setup a 1:1 mapping for the first 16M to make floppy (an ISA device) work. +config INTR_REMAP + bool "Support for Interrupt Remapping (EXPERIMENTAL)" + depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL + help + Supports Interrupt remapping for IO-APIC and MSI devices. + To use x2apic mode in the CPU's which support x2APIC enhancements or + to support platforms with CPU's having > 8 bit APIC ID, say Y. + source "drivers/pci/pcie/Kconfig" source "drivers/pci/Kconfig" diff --git a/arch/x86/mach-es7000/Makefile b/arch/x86/es7000/Makefile index 3ef8b43b62f..3ef8b43b62f 100644 --- a/arch/x86/mach-es7000/Makefile +++ b/arch/x86/es7000/Makefile diff --git a/arch/x86/mach-es7000/es7000.h b/arch/x86/es7000/es7000.h index c8d5aa132fa..4e62f6fa95b 100644 --- a/arch/x86/mach-es7000/es7000.h +++ b/arch/x86/es7000/es7000.h @@ -1,7 +1,7 @@ /* * Written by: Garry Forsgren, Unisys Corporation * Natalie Protasevich, Unisys Corporation - * This file contains the code to configure and interface + * This file contains the code to configure and interface * with Unisys ES7000 series hardware system manager. * * Copyright (c) 2003 Unisys Corporation. All Rights Reserved. @@ -18,7 +18,7 @@ * with this program; if not, write the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston MA 02111-1307, USA. * - * Contact information: Unisys Corporation, Township Line & Union Meeting + * Contact information: Unisys Corporation, Township Line & Union Meeting * Roads-A, Unisys Way, Blue Bell, Pennsylvania, 19424, or: * * http://www.unisys.com @@ -41,7 +41,7 @@ #define MIP_VALID 0x0100000000000000ULL #define MIP_PORT(VALUE) ((VALUE >> 32) & 0xffff) -#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff) +#define MIP_RD_LO(VALUE) (VALUE & 0xffffffff) struct mip_reg_info { unsigned long long mip_info; @@ -51,11 +51,11 @@ struct mip_reg_info { }; struct part_info { - unsigned char type; + unsigned char type; unsigned char length; unsigned char part_id; unsigned char apic_mode; - unsigned long snum; + unsigned long snum; char ptype[16]; char sname[64]; char pname[64]; @@ -68,11 +68,11 @@ struct psai { }; struct es7000_mem_info { - unsigned char type; + unsigned char type; unsigned char length; unsigned char resv[6]; - unsigned long long start; - unsigned long long size; + unsigned long long start; + unsigned long long size; }; struct es7000_oem_table { @@ -106,7 +106,7 @@ struct mip_reg { }; #define MIP_SW_APIC 0x1020b -#define MIP_FUNC(VALUE) (VALUE & 0xff) +#define MIP_FUNC(VALUE) (VALUE & 0xff) extern int parse_unisys_oem (char *oemptr); extern void setup_unisys(void); diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/es7000/es7000plat.c index 50189af14b8..7789fde13c3 100644 --- a/arch/x86/mach-es7000/es7000plat.c +++ b/arch/x86/es7000/es7000plat.c @@ -72,7 +72,7 @@ es7000_rename_gsi(int ioapic, int gsi) base += nr_ioapic_registers[i]; } - if (!ioapic && (gsi < 16)) + if (!ioapic && (gsi < 16)) gsi += base; return gsi; } diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 3db651fc8ec..a07ec14f331 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -104,6 +104,8 @@ obj-$(CONFIG_OLPC) += olpc.o ifeq ($(CONFIG_X86_64),y) obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o obj-y += bios_uv.o + obj-y += genx2apic_cluster.o + obj-y += genx2apic_phys.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o obj-$(CONFIG_AUDIT) += audit_64.o diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 7d40ef7b36e..c2ac1b4515a 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -252,10 +252,8 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled) return; } -#ifdef CONFIG_X86_32 if (boot_cpu_physical_apicid != -1U) ver = apic_version[boot_cpu_physical_apicid]; -#endif generic_processor_info(id, ver); } @@ -774,11 +772,9 @@ static void __init acpi_register_lapic_address(unsigned long address) set_fixmap_nocache(FIX_APIC_BASE, address); if (boot_cpu_physical_apicid == -1U) { - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); -#ifdef CONFIG_X86_32 + boot_cpu_physical_apicid = read_apic_id(); apic_version[boot_cpu_physical_apicid] = GET_APIC_VERSION(apic_read(APIC_LVR)); -#endif } } @@ -1350,7 +1346,9 @@ static void __init acpi_process_madt(void) acpi_ioapic = 1; smp_found_config = 1; +#ifdef CONFIG_X86_32 setup_apic_routing(); +#endif } } if (error == -EINVAL) { diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index f88bd0d982b..a91c57cb666 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -60,10 +60,8 @@ unsigned long mp_lapic_addr; static int force_enable_local_apic; int disable_apic; -/* Local APIC timer verification ok */ -static int local_apic_timer_verify_ok; /* Disable local APIC timer from the kernel commandline or via dmi quirk */ -static int local_apic_timer_disabled; +static int disable_apic_timer __cpuinitdata; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); @@ -130,7 +128,11 @@ static inline int lapic_get_version(void) */ static inline int lapic_is_integrated(void) { +#ifdef CONFIG_X86_64 + return 1; +#else return APIC_INTEGRATED(lapic_get_version()); +#endif } /* @@ -145,13 +147,18 @@ static int modern_apic(void) return lapic_get_version() >= 0x14; } -void apic_wait_icr_idle(void) +/* + * Paravirt kernels also might be using these below ops. So we still + * use generic apic_read()/apic_write(), which might be pointing to different + * ops in PARAVIRT case. + */ +void xapic_wait_icr_idle(void) { while (apic_read(APIC_ICR) & APIC_ICR_BUSY) cpu_relax(); } -u32 safe_apic_wait_icr_idle(void) +u32 safe_xapic_wait_icr_idle(void) { u32 send_status; int timeout; @@ -167,16 +174,48 @@ u32 safe_apic_wait_icr_idle(void) return send_status; } +void xapic_icr_write(u32 low, u32 id) +{ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id)); + apic_write(APIC_ICR, low); +} + +u64 xapic_icr_read(void) +{ + u32 icr1, icr2; + + icr2 = apic_read(APIC_ICR2); + icr1 = apic_read(APIC_ICR); + + return icr1 | ((u64)icr2 << 32); +} + +static struct apic_ops xapic_ops = { + .read = native_apic_mem_read, + .write = native_apic_mem_write, + .icr_read = xapic_icr_read, + .icr_write = xapic_icr_write, + .wait_icr_idle = xapic_wait_icr_idle, + .safe_wait_icr_idle = safe_xapic_wait_icr_idle, +}; + +struct apic_ops __read_mostly *apic_ops = &xapic_ops; +EXPORT_SYMBOL_GPL(apic_ops); + /** * enable_NMI_through_LVT0 - enable NMI through local vector table 0 */ void __cpuinit enable_NMI_through_LVT0(void) { - unsigned int v = APIC_DM_NMI; + unsigned int v; - /* Level triggered for 82489DX */ + /* unmask and set to NMI */ + v = APIC_DM_NMI; + + /* Level triggered for 82489DX (32bit mode) */ if (!lapic_is_integrated()) v |= APIC_LVT_LEVEL_TRIGGER; + apic_write(APIC_LVT0, v); } @@ -193,9 +232,13 @@ int get_physical_broadcast(void) */ int lapic_get_maxlvt(void) { - unsigned int v = apic_read(APIC_LVR); + unsigned int v; - /* 82489DXs do not report # of LVT entries. */ + v = apic_read(APIC_LVR); + /* + * - we always have APIC integrated on 64bit mode + * - 82489DXs do not report # of LVT entries + */ return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; } @@ -203,8 +246,12 @@ int lapic_get_maxlvt(void) * Local APIC timer */ -/* Clock divisor is set to 16 */ +/* Clock divisor */ +#ifdef CONFG_X86_64 +#define APIC_DIVISOR 1 +#else #define APIC_DIVISOR 16 +#endif /* * This function sets up the local APIC timer, with a timeout of @@ -212,6 +259,9 @@ int lapic_get_maxlvt(void) * this function twice on the boot CPU, once with a bogus timeout * value, second time for real. The other (noncalibrating) CPUs * call this function only once, with the real, calibrated value. + * + * We do reads before writes even if unnecessary, to get around the + * P5 APIC double write bug. */ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { @@ -233,14 +283,44 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) */ tmp_value = apic_read(APIC_TDCR); apic_write(APIC_TDCR, - (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | - APIC_TDR_DIV_16); + (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | + APIC_TDR_DIV_16); if (!oneshot) apic_write(APIC_TMICT, clocks / APIC_DIVISOR); } /* + * Setup extended LVT, AMD specific (K8, family 10h) + * + * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and + * MCE interrupts are supported. Thus MCE offset must be set to 0. + */ + +#define APIC_EILVT_LVTOFF_MCE 0 +#define APIC_EILVT_LVTOFF_IBS 1 + +static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) +{ + unsigned long reg = (lvt_off << 4) + APIC_EILVT0; + unsigned int v = (mask << 16) | (msg_type << 8) | vector; + + apic_write(reg, v); +} + +u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_MCE; +} + +u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) +{ + setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); + return APIC_EILVT_LVTOFF_IBS; +} + +/* * Program the next event, relative to now */ static int lapic_next_event(unsigned long delta, @@ -259,8 +339,8 @@ static void lapic_timer_setup(enum clock_event_mode mode, unsigned long flags; unsigned int v; - /* Lapic used for broadcast ? */ - if (!local_apic_timer_verify_ok) + /* Lapic used as dummy for broadcast ? */ + if (evt->features & CLOCK_EVT_FEAT_DUMMY) return; local_irq_save(flags); @@ -473,7 +553,7 @@ static int __init calibrate_APIC_clock(void) return -1; } - local_apic_timer_verify_ok = 1; + levt->features &= ~CLOCK_EVT_FEAT_DUMMY; /* We trust the pm timer based calibration */ if (!pm_referenced) { @@ -507,11 +587,11 @@ static int __init calibrate_APIC_clock(void) if (deltaj >= LAPIC_CAL_LOOPS-2 && deltaj <= LAPIC_CAL_LOOPS+2) apic_printk(APIC_VERBOSE, "... jiffies result ok\n"); else - local_apic_timer_verify_ok = 0; + levt->features |= CLOCK_EVT_FEAT_DUMMY; } else local_irq_enable(); - if (!local_apic_timer_verify_ok) { + if (levt->features & CLOCK_EVT_FEAT_DUMMY) { printk(KERN_WARNING "APIC timer disabled due to verification failure.\n"); return -1; @@ -533,7 +613,8 @@ void __init setup_boot_APIC_clock(void) * timer as a dummy clock event source on SMP systems, so the * broadcast mechanism is used. On UP systems simply ignore it. */ - if (local_apic_timer_disabled) { + if (disable_apic_timer) { + printk(KERN_INFO "Disabling APIC timer\n"); /* No broadcast on UP ! */ if (num_possible_cpus() > 1) { lapic_clockevent.mult = 1; @@ -602,7 +683,11 @@ static void local_apic_timer_interrupt(void) /* * the NMI deadlock-detector uses this. */ +#ifdef CONFIG_X86_64 + add_pda(apic_timer_irqs, 1); +#else per_cpu(irq_stat, cpu).apic_timer_irqs++; +#endif evt->event_handler(evt); } @@ -642,35 +727,6 @@ int setup_profiling_timer(unsigned int multiplier) } /* - * Setup extended LVT, AMD specific (K8, family 10h) - * - * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and - * MCE interrupts are supported. Thus MCE offset must be set to 0. - */ - -#define APIC_EILVT_LVTOFF_MCE 0 -#define APIC_EILVT_LVTOFF_IBS 1 - -static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask) -{ - unsigned long reg = (lvt_off << 4) + APIC_EILVT0; - unsigned int v = (mask << 16) | (msg_type << 8) | vector; - apic_write(reg, v); -} - -u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_MCE; -} - -u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask) -{ - setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask); - return APIC_EILVT_LVTOFF_IBS; -} - -/* * Local APIC start and shutdown */ @@ -715,7 +771,7 @@ void clear_local_APIC(void) } /* lets not touch this if we didn't frob it */ -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL) if (maxlvt >= 5) { v = apic_read(APIC_LVTTHMR); apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED); @@ -732,10 +788,6 @@ void clear_local_APIC(void) if (maxlvt >= 4) apic_write(APIC_LVTPC, APIC_LVT_MASKED); -#ifdef CONFIG_X86_MCE_P4THERMAL - if (maxlvt >= 5) - apic_write(APIC_LVTTHMR, APIC_LVT_MASKED); -#endif /* Integrated APIC (!82489DX) ? */ if (lapic_is_integrated()) { if (maxlvt > 3) @@ -750,7 +802,7 @@ void clear_local_APIC(void) */ void disable_local_APIC(void) { - unsigned long value; + unsigned int value; clear_local_APIC(); @@ -762,6 +814,7 @@ void disable_local_APIC(void) value &= ~APIC_SPIV_APIC_ENABLED; apic_write(APIC_SPIV, value); +#ifdef CONFIG_X86_32 /* * When LAPIC was disabled by the BIOS and enabled by the kernel, * restore the disabled state. @@ -773,6 +826,7 @@ void disable_local_APIC(void) l &= ~MSR_IA32_APICBASE_ENABLE; wrmsr(MSR_IA32_APICBASE, l, h); } +#endif } /* @@ -789,11 +843,15 @@ void lapic_shutdown(void) return; local_irq_save(flags); - clear_local_APIC(); - if (enabled_via_apicbase) +#ifdef CONFIG_X86_32 + if (!enabled_via_apicbase) + clear_local_APIC(); + else +#endif disable_local_APIC(); + local_irq_restore(flags); } @@ -838,6 +896,12 @@ int __init verify_local_APIC(void) */ reg0 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); + apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); + reg1 = apic_read(APIC_ID); + apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); + apic_write(APIC_ID, reg0); + if (reg1 != (reg0 ^ APIC_ID_MASK)) + return 0; /* * The next two are just to see if we have sane values. @@ -863,14 +927,15 @@ void __init sync_Arb_IDs(void) */ if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD) return; + /* * Wait for idle. */ apic_wait_icr_idle(); apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write(APIC_ICR, - APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT); + apic_write(APIC_ICR, APIC_DEST_ALLINC | + APIC_INT_LEVELTRIG | APIC_DM_INIT); } /* @@ -878,7 +943,7 @@ void __init sync_Arb_IDs(void) */ void __init init_bsp_APIC(void) { - unsigned long value; + unsigned int value; /* * Don't do the setup now if we have a SMP BIOS as the @@ -899,11 +964,13 @@ void __init init_bsp_APIC(void) value &= ~APIC_VECTOR_MASK; value |= APIC_SPIV_APIC_ENABLED; +#ifdef CONFIG_X86_32 /* This bit is reserved on P4/Xeon and should be cleared */ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 == 15)) value &= ~APIC_SPIV_FOCUS_DISABLED; else +#endif value |= APIC_SPIV_FOCUS_DISABLED; value |= SPURIOUS_APIC_VECTOR; apic_write(APIC_SPIV, value); @@ -922,6 +989,16 @@ static void __cpuinit lapic_setup_esr(void) { unsigned long oldvalue, value, maxlvt; if (lapic_is_integrated() && !esr_disable) { + if (esr_disable) { + /* + * Something untraceable is creating bad interrupts on + * secondary quads ... for the moment, just leave the + * ESR disabled - we can't do anything useful with the + * errors anyway - mbligh + */ + printk(KERN_INFO "Leaving ESR disabled.\n"); + return; + } /* !82489DX */ maxlvt = lapic_get_maxlvt(); if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ @@ -942,16 +1019,7 @@ static void __cpuinit lapic_setup_esr(void) "vector: 0x%08lx after: 0x%08lx\n", oldvalue, value); } else { - if (esr_disable) - /* - * Something untraceable is creating bad interrupts on - * secondary quads ... for the moment, just leave the - * ESR disabled - we can't do anything useful with the - * errors anyway - mbligh - */ - printk(KERN_INFO "Leaving ESR disabled.\n"); - else - printk(KERN_INFO "No ESR for 82489DX.\n"); + printk(KERN_INFO "No ESR for 82489DX.\n"); } } @@ -1089,13 +1157,17 @@ void __cpuinit setup_local_APIC(void) void __cpuinit end_local_APIC_setup(void) { - unsigned long value; - lapic_setup_esr(); - /* Disable the local apic timer */ - value = apic_read(APIC_LVTT); - value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); - apic_write(APIC_LVTT, value); + +#ifdef CONFIG_X86_32 + { + unsigned int value; + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write(APIC_LVTT, value); + } +#endif setup_apic_nmi_watchdog(NULL); apic_pm_activate(); @@ -1205,7 +1277,7 @@ void __init init_apic_mappings(void) * default configuration (or the MP table is broken). */ if (boot_cpu_physical_apicid == -1U) - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); } @@ -1242,7 +1314,7 @@ int __init APIC_init_uniprocessor(void) * might be zero if read from MP tables. Get it from LAPIC. */ #ifdef CONFIG_CRASH_DUMP - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); #endif physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); @@ -1321,59 +1393,12 @@ void smp_error_interrupt(struct pt_regs *regs) irq_exit(); } -#ifdef CONFIG_SMP -void __init smp_intr_init(void) -{ - /* - * IRQ0 must be given a fixed assignment and initialized, - * because it's used before the IO-APIC is set up. - */ - set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]); - - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPI for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* IPI for single call function */ - set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, - call_function_single_interrupt); -} -#endif - -/* - * Initialize APIC interrupts - */ -void __init apic_intr_init(void) -{ -#ifdef CONFIG_SMP - smp_intr_init(); -#endif - /* self generated IPI for local APIC timer */ - alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - /* thermal monitor LVT interrupt */ -#ifdef CONFIG_X86_MCE_P4THERMAL - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); -#endif -} - /** * connect_bsp_APIC - attach the APIC to the interrupt system */ void __init connect_bsp_APIC(void) { +#ifdef CONFIG_X86_32 if (pic_mode) { /* * Do not trust the local APIC being empty at bootup. @@ -1388,6 +1413,7 @@ void __init connect_bsp_APIC(void) outb(0x70, 0x22); outb(0x01, 0x23); } +#endif enable_apic_mode(); } @@ -1400,6 +1426,9 @@ void __init connect_bsp_APIC(void) */ void disconnect_bsp_APIC(int virt_wire_setup) { + unsigned int value; + +#ifdef CONFIG_X86_32 if (pic_mode) { /* * Put the board back into PIC mode (has an effect only on @@ -1411,54 +1440,53 @@ void disconnect_bsp_APIC(int virt_wire_setup) "entering PIC mode.\n"); outb(0x70, 0x22); outb(0x00, 0x23); - } else { - /* Go back to Virtual Wire compatibility mode */ - unsigned long value; + return; + } +#endif - /* For the spurious interrupt use vector F, and enable it */ - value = apic_read(APIC_SPIV); - value &= ~APIC_VECTOR_MASK; - value |= APIC_SPIV_APIC_ENABLED; - value |= 0xf; - apic_write(APIC_SPIV, value); + /* Go back to Virtual Wire compatibility mode */ - if (!virt_wire_setup) { - /* - * For LVT0 make it edge triggered, active high, - * external and enabled - */ - value = apic_read(APIC_LVT0); - value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | - APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | - APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); - value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); - apic_write(APIC_LVT0, value); - } else { - /* Disable LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED); - } + /* For the spurious interrupt use vector F, and enable it */ + value = apic_read(APIC_SPIV); + value &= ~APIC_VECTOR_MASK; + value |= APIC_SPIV_APIC_ENABLED; + value |= 0xf; + apic_write(APIC_SPIV, value); + if (!virt_wire_setup) { /* - * For LVT1 make it edge triggered, active high, nmi and - * enabled + * For LVT0 make it edge triggered, active high, + * external and enabled */ - value = apic_read(APIC_LVT1); - value &= ~( - APIC_MODE_MASK | APIC_SEND_PENDING | + value = apic_read(APIC_LVT0); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; - value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); - apic_write(APIC_LVT1, value); + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT); + apic_write(APIC_LVT0, value); + } else { + /* Disable LVT0 */ + apic_write(APIC_LVT0, APIC_LVT_MASKED); } + + /* + * For LVT1 make it edge triggered, active high, + * nmi and enabled + */ + value = apic_read(APIC_LVT1); + value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | + APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | + APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED); + value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING; + value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI); + apic_write(APIC_LVT1, value); } void __cpuinit generic_processor_info(int apicid, int version) { int cpu; cpumask_t tmp_map; - physid_mask_t phys_cpu; /* * Validate version @@ -1471,9 +1499,6 @@ void __cpuinit generic_processor_info(int apicid, int version) } apic_version[apicid] = version; - phys_cpu = apicid_to_cpu_present(apicid); - physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu); - if (num_processors >= NR_CPUS) { printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." " Processor ignored.\n", NR_CPUS); @@ -1484,17 +1509,19 @@ void __cpuinit generic_processor_info(int apicid, int version) cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); - if (apicid == boot_cpu_physical_apicid) + physid_set(apicid, phys_cpu_present_map); + if (apicid == boot_cpu_physical_apicid) { /* * x86_bios_cpu_apicid is required to have processors listed * in same order as logical cpu numbers. Hence the first * entry is BSP, and so on. */ cpu = 0; - + } if (apicid > max_physical_apicid) max_physical_apicid = apicid; +#ifdef CONFIG_X86_32 /* * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y * but we need to work other dependencies like SMP_SUSPEND etc @@ -1514,7 +1541,9 @@ void __cpuinit generic_processor_info(int apicid, int version) def_to_bigsmp = 1; } } -#ifdef CONFIG_SMP +#endif + +#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64) /* are we being called early in kernel startup? */ if (early_per_cpu_ptr(x86_cpu_to_apicid)) { u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); @@ -1527,6 +1556,7 @@ void __cpuinit generic_processor_info(int apicid, int version) per_cpu(x86_bios_cpu_apicid, cpu) = apicid; } #endif + cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); } @@ -1537,6 +1567,11 @@ void __cpuinit generic_processor_info(int apicid, int version) #ifdef CONFIG_PM static struct { + /* + * 'active' is true if the local APIC was enabled by us and + * not the BIOS; this signifies that we are also responsible + * for disabling it before entering apm/acpi suspend + */ int active; /* r/w apic fields */ unsigned int apic_id; @@ -1577,7 +1612,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); apic_pm_state.apic_tmict = apic_read(APIC_TMICT); apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif @@ -1601,16 +1636,23 @@ static int lapic_resume(struct sys_device *dev) local_irq_save(flags); - /* - * Make sure the APICBASE points to the right address - * - * FIXME! This will be wrong if we ever support suspend on - * SMP! We'll need to do this as part of the CPU restore! - */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); +#ifdef CONFIG_X86_64 + if (x2apic) + enable_x2apic(); + else +#endif + { + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); apic_write(APIC_ID, apic_pm_state.apic_id); @@ -1620,7 +1662,7 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_SPIV, apic_pm_state.apic_spiv); apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_P4THERMAL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); #endif @@ -1634,7 +1676,9 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); apic_write(APIC_ESR, 0); apic_read(APIC_ESR); + local_irq_restore(flags); + return 0; } @@ -1690,20 +1734,20 @@ static int __init parse_lapic(char *arg) } early_param("lapic", parse_lapic); -static int __init parse_nolapic(char *arg) +static int __init setup_disableapic(char *arg) { disable_apic = 1; setup_clear_cpu_cap(X86_FEATURE_APIC); return 0; } -early_param("nolapic", parse_nolapic); +early_param("disableapic", setup_disableapic); -static int __init parse_disable_lapic_timer(char *arg) +/* same as disableapic, for compatibility */ +static int __init setup_nolapic(char *arg) { - local_apic_timer_disabled = 1; - return 0; + return setup_disableapic(arg); } -early_param("nolapic_timer", parse_disable_lapic_timer); +early_param("nolapic", setup_nolapic); static int __init parse_lapic_timer_c2_ok(char *arg) { @@ -1712,15 +1756,40 @@ static int __init parse_lapic_timer_c2_ok(char *arg) } early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); +static int __init parse_disable_apic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("noapictimer", parse_disable_apic_timer); + +static int __init parse_nolapic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("nolapic_timer", parse_nolapic_timer); + static int __init apic_set_verbosity(char *arg) { - if (!arg) + if (!arg) { +#ifdef CONFIG_X86_64 + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; +#endif return -EINVAL; + } - if (strcmp(arg, "debug") == 0) + if (strcmp("debug", arg) == 0) apic_verbosity = APIC_DEBUG; - else if (strcmp(arg, "verbose") == 0) + else if (strcmp("verbose", arg) == 0) apic_verbosity = APIC_VERBOSE; + else { + printk(KERN_WARNING "APIC Verbosity level %s not recognised" + " use apic=verbose or apic=debug\n", arg); + return -EINVAL; + } return 0; } diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 446c062e831..53898b65a6a 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -27,6 +27,7 @@ #include <linux/clockchips.h> #include <linux/acpi_pmtmr.h> #include <linux/module.h> +#include <linux/dmar.h> #include <asm/atomic.h> #include <asm/smp.h> @@ -39,13 +40,20 @@ #include <asm/proto.h> #include <asm/timex.h> #include <asm/apic.h> +#include <asm/i8259.h> #include <mach_ipi.h> #include <mach_apic.h> +/* Disable local APIC timer from the kernel commandline or via dmi quirk */ static int disable_apic_timer __cpuinitdata; static int apic_calibrate_pmtmr __initdata; int disable_apic; +int disable_x2apic; +int x2apic; + +/* x2apic enabled before OS handover */ +int x2apic_preenabled; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; @@ -73,6 +81,9 @@ static void lapic_timer_setup(enum clock_event_mode mode, static void lapic_timer_broadcast(cpumask_t mask); static void apic_pm_activate(void); +/* + * The local apic timer can be used for any function which is CPU local. + */ static struct clock_event_device lapic_clockevent = { .name = "lapic", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT @@ -99,11 +110,15 @@ static inline int lapic_get_version(void) } /* - * Check, if the APIC is integrated or a seperate chip + * Check, if the APIC is integrated or a separate chip */ static inline int lapic_is_integrated(void) { +#ifdef CONFIG_X86_64 return 1; +#else + return APIC_INTEGRATED(lapic_get_version()); +#endif } /* @@ -118,13 +133,18 @@ static int modern_apic(void) return lapic_get_version() >= 0x14; } -void apic_wait_icr_idle(void) +/* + * Paravirt kernels also might be using these below ops. So we still + * use generic apic_read()/apic_write(), which might be pointing to different + * ops in PARAVIRT case. + */ +void xapic_wait_icr_idle(void) { while (apic_read(APIC_ICR) & APIC_ICR_BUSY) cpu_relax(); } -u32 safe_apic_wait_icr_idle(void) +u32 safe_xapic_wait_icr_idle(void) { u32 send_status; int timeout; @@ -140,6 +160,68 @@ u32 safe_apic_wait_icr_idle(void) return send_status; } +void xapic_icr_write(u32 low, u32 id) +{ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id)); + apic_write(APIC_ICR, low); +} + +u64 xapic_icr_read(void) +{ + u32 icr1, icr2; + + icr2 = apic_read(APIC_ICR2); + icr1 = apic_read(APIC_ICR); + + return icr1 | ((u64)icr2 << 32); +} + +static struct apic_ops xapic_ops = { + .read = native_apic_mem_read, + .write = native_apic_mem_write, + .icr_read = xapic_icr_read, + .icr_write = xapic_icr_write, + .wait_icr_idle = xapic_wait_icr_idle, + .safe_wait_icr_idle = safe_xapic_wait_icr_idle, +}; + +struct apic_ops __read_mostly *apic_ops = &xapic_ops; +EXPORT_SYMBOL_GPL(apic_ops); + +static void x2apic_wait_icr_idle(void) +{ + /* no need to wait for icr idle in x2apic */ + return; +} + +static u32 safe_x2apic_wait_icr_idle(void) +{ + /* no need to wait for icr idle in x2apic */ + return 0; +} + +void x2apic_icr_write(u32 low, u32 id) +{ + wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low); +} + +u64 x2apic_icr_read(void) +{ + unsigned long val; + + rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val); + return val; +} + +static struct apic_ops x2apic_ops = { + .read = native_apic_msr_read, + .write = native_apic_msr_write, + .icr_read = x2apic_icr_read, + .icr_write = x2apic_icr_write, + .wait_icr_idle = x2apic_wait_icr_idle, + .safe_wait_icr_idle = safe_x2apic_wait_icr_idle, +}; + /** * enable_NMI_through_LVT0 - enable NMI through local vector table 0 */ @@ -149,6 +231,11 @@ void __cpuinit enable_NMI_through_LVT0(void) /* unmask and set to NMI */ v = APIC_DM_NMI; + + /* Level triggered for 82489DX (32bit mode) */ + if (!lapic_is_integrated()) + v |= APIC_LVT_LEVEL_TRIGGER; + apic_write(APIC_LVT0, v); } @@ -157,14 +244,28 @@ void __cpuinit enable_NMI_through_LVT0(void) */ int lapic_get_maxlvt(void) { - unsigned int v, maxlvt; + unsigned int v; v = apic_read(APIC_LVR); - maxlvt = GET_APIC_MAXLVT(v); - return maxlvt; + /* + * - we always have APIC integrated on 64bit mode + * - 82489DXs do not report # of LVT entries + */ + return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; } /* + * Local APIC timer + */ + +/* Clock divisor */ +#ifdef CONFG_X86_64 +#define APIC_DIVISOR 1 +#else +#define APIC_DIVISOR 16 +#endif + +/* * This function sets up the local APIC timer, with a timeout of * 'clocks' APIC bus clock. During calibration we actually call * this function twice on the boot CPU, once with a bogus timeout @@ -174,7 +275,6 @@ int lapic_get_maxlvt(void) * We do reads before writes even if unnecessary, to get around the * P5 APIC double write bug. */ - static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { unsigned int lvtt_value, tmp_value; @@ -182,6 +282,9 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) lvtt_value = LOCAL_TIMER_VECTOR; if (!oneshot) lvtt_value |= APIC_LVT_TIMER_PERIODIC; + if (!lapic_is_integrated()) + lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); + if (!irqen) lvtt_value |= APIC_LVT_MASKED; @@ -191,12 +294,12 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) * Divide PICLK by 16 */ tmp_value = apic_read(APIC_TDCR); - apic_write(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); + apic_write(APIC_TDCR, + (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | + APIC_TDR_DIV_16); if (!oneshot) - apic_write(APIC_TMICT, clocks); + apic_write(APIC_TMICT, clocks / APIC_DIVISOR); } /* @@ -366,7 +469,7 @@ static int __init calibrate_APIC_clock(void) lapic_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &lapic_clockevent); - calibration_result = result / HZ; + calibration_result = (result * APIC_DIVISOR) / HZ; /* * Do a sanity check on the APIC calibration result @@ -388,10 +491,10 @@ static int __init calibrate_APIC_clock(void) void __init setup_boot_APIC_clock(void) { /* - * The local apic timer can be disabled via the kernel commandline. - * Register the lapic timer as a dummy clock event source on SMP - * systems, so the broadcast mechanism is used. On UP systems simply - * ignore it. + * The local apic timer can be disabled via the kernel + * commandline or from the CPU detection code. Register the lapic + * timer as a dummy clock event source on SMP systems, so the + * broadcast mechanism is used. On UP systems simply ignore it. */ if (disable_apic_timer) { printk(KERN_INFO "Disabling APIC timer\n"); @@ -403,7 +506,9 @@ void __init setup_boot_APIC_clock(void) return; } - printk(KERN_INFO "Using local APIC timer interrupts.\n"); + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" + "calibrating APIC timer ...\n"); + if (calibrate_APIC_clock()) { /* No broadcast on UP ! */ if (num_possible_cpus() > 1) @@ -422,6 +527,7 @@ void __init setup_boot_APIC_clock(void) printk(KERN_WARNING "APIC timer registered as dummy," " due to nmi_watchdog=%d!\n", nmi_watchdog); + /* Setup the lapic or request the broadcast */ setup_APIC_timer(); } @@ -460,7 +566,11 @@ static void local_apic_timer_interrupt(void) /* * the NMI deadlock-detector uses this. */ +#ifdef CONFIG_X86_64 add_pda(apic_timer_irqs, 1); +#else + per_cpu(irq_stat, cpu).apic_timer_irqs++; +#endif evt->event_handler(evt); } @@ -491,6 +601,7 @@ void smp_apic_timer_interrupt(struct pt_regs *regs) irq_enter(); local_apic_timer_interrupt(); irq_exit(); + set_irq_regs(old_regs); } @@ -544,6 +655,13 @@ void clear_local_APIC(void) apic_write(APIC_LVTPC, v | APIC_LVT_MASKED); } + /* lets not touch this if we didn't frob it */ +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL) + if (maxlvt >= 5) { + v = apic_read(APIC_LVTTHMR); + apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED); + } +#endif /* * Clean APIC state for other OSs: */ @@ -554,8 +672,14 @@ void clear_local_APIC(void) apic_write(APIC_LVTERR, APIC_LVT_MASKED); if (maxlvt >= 4) apic_write(APIC_LVTPC, APIC_LVT_MASKED); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); + + /* Integrated APIC (!82489DX) ? */ + if (lapic_is_integrated()) { + if (maxlvt > 3) + /* Clear ESR due to Pentium errata 3AP and 11AP */ + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + } } /** @@ -574,8 +698,28 @@ void disable_local_APIC(void) value = apic_read(APIC_SPIV); value &= ~APIC_SPIV_APIC_ENABLED; apic_write(APIC_SPIV, value); + +#ifdef CONFIG_X86_32 + /* + * When LAPIC was disabled by the BIOS and enabled by the kernel, + * restore the disabled state. + */ + if (enabled_via_apicbase) { + unsigned int l, h; + + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_ENABLE; + wrmsr(MSR_IA32_APICBASE, l, h); + } +#endif } +/* + * If Linux enabled the LAPIC against the BIOS default disable it down before + * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and + * not power-off. Additionally clear all LVT entries before disable_local_APIC + * for the case where Linux didn't enable the LAPIC. + */ void lapic_shutdown(void) { unsigned long flags; @@ -585,7 +729,13 @@ void lapic_shutdown(void) local_irq_save(flags); - disable_local_APIC(); +#ifdef CONFIG_X86_32 + if (!enabled_via_apicbase) + clear_local_APIC(); + else +#endif + disable_local_APIC(); + local_irq_restore(flags); } @@ -629,10 +779,10 @@ int __init verify_local_APIC(void) /* * The ID register is read/write in a real APIC. */ - reg0 = read_apic_id(); + reg0 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); - reg1 = read_apic_id(); + reg1 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); apic_write(APIC_ID, reg0); if (reg1 != (reg0 ^ APIC_ID_MASK)) @@ -656,8 +806,11 @@ int __init verify_local_APIC(void) */ void __init sync_Arb_IDs(void) { - /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */ - if (modern_apic()) + /* + * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not + * needed on AMD. + */ + if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD) return; /* @@ -666,8 +819,8 @@ void __init sync_Arb_IDs(void) apic_wait_icr_idle(); apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG - | APIC_DM_INIT); + apic_write(APIC_ICR, APIC_DEST_ALLINC | + APIC_INT_LEVELTRIG | APIC_DM_INIT); } /* @@ -684,8 +837,6 @@ void __init init_bsp_APIC(void) if (smp_found_config || !cpu_has_apic) return; - value = apic_read(APIC_LVR); - /* * Do not trust the local APIC being empty at bootup. */ @@ -697,7 +848,15 @@ void __init init_bsp_APIC(void) value = apic_read(APIC_SPIV); value &= ~APIC_VECTOR_MASK; value |= APIC_SPIV_APIC_ENABLED; - value |= APIC_SPIV_FOCUS_DISABLED; + +#ifdef CONFIG_X86_32 + /* This bit is reserved on P4/Xeon and should be cleared */ + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + (boot_cpu_data.x86 == 15)) + value &= ~APIC_SPIV_FOCUS_DISABLED; + else +#endif + value |= APIC_SPIV_FOCUS_DISABLED; value |= SPURIOUS_APIC_VECTOR; apic_write(APIC_SPIV, value); @@ -706,9 +865,50 @@ void __init init_bsp_APIC(void) */ apic_write(APIC_LVT0, APIC_DM_EXTINT); value = APIC_DM_NMI; + if (!lapic_is_integrated()) /* 82489DX */ + value |= APIC_LVT_LEVEL_TRIGGER; apic_write(APIC_LVT1, value); } +static void __cpuinit lapic_setup_esr(void) +{ + unsigned long oldvalue, value, maxlvt; + if (lapic_is_integrated() && !esr_disable) { + if (esr_disable) { + /* + * Something untraceable is creating bad interrupts on + * secondary quads ... for the moment, just leave the + * ESR disabled - we can't do anything useful with the + * errors anyway - mbligh + */ + printk(KERN_INFO "Leaving ESR disabled.\n"); + return; + } + /* !82489DX */ + maxlvt = lapic_get_maxlvt(); + if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ + apic_write(APIC_ESR, 0); + oldvalue = apic_read(APIC_ESR); + + /* enables sending errors */ + value = ERROR_APIC_VECTOR; + apic_write(APIC_LVTERR, value); + /* + * spec says clear errors after enabling vector. + */ + if (maxlvt > 3) + apic_write(APIC_ESR, 0); + value = apic_read(APIC_ESR); + if (value != oldvalue) + apic_printk(APIC_VERBOSE, "ESR value before enabling " + "vector: 0x%08lx after: 0x%08lx\n", + oldvalue, value); + } else { + printk(KERN_INFO "No ESR for 82489DX.\n"); + } +} + + /** * setup_local_APIC - setup the local APIC */ @@ -814,25 +1014,143 @@ void __cpuinit setup_local_APIC(void) preempt_enable(); } -static void __cpuinit lapic_setup_esr(void) -{ - unsigned maxlvt = lapic_get_maxlvt(); - - apic_write(APIC_LVTERR, ERROR_APIC_VECTOR); - /* - * spec says clear errors after enabling vector. - */ - if (maxlvt > 3) - apic_write(APIC_ESR, 0); -} - void __cpuinit end_local_APIC_setup(void) { lapic_setup_esr(); + +#ifdef CONFIG_X86_32 + { + unsigned int value; + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write(APIC_LVTT, value); + } +#endif + setup_apic_nmi_watchdog(NULL); apic_pm_activate(); } +void check_x2apic(void) +{ + int msr, msr2; + + rdmsr(MSR_IA32_APICBASE, msr, msr2); + + if (msr & X2APIC_ENABLE) { + printk("x2apic enabled by BIOS, switching to x2apic ops\n"); + x2apic_preenabled = x2apic = 1; + apic_ops = &x2apic_ops; + } +} + +void enable_x2apic(void) +{ + int msr, msr2; + + rdmsr(MSR_IA32_APICBASE, msr, msr2); + if (!(msr & X2APIC_ENABLE)) { + printk("Enabling x2apic\n"); + wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0); + } +} + +void enable_IR_x2apic(void) +{ +#ifdef CONFIG_INTR_REMAP + int ret; + unsigned long flags; + + if (!cpu_has_x2apic) + return; + + if (!x2apic_preenabled && disable_x2apic) { + printk(KERN_INFO + "Skipped enabling x2apic and Interrupt-remapping " + "because of nox2apic\n"); + return; + } + + if (x2apic_preenabled && disable_x2apic) + panic("Bios already enabled x2apic, can't enforce nox2apic"); + + if (!x2apic_preenabled && skip_ioapic_setup) { + printk(KERN_INFO + "Skipped enabling x2apic and Interrupt-remapping " + "because of skipping io-apic setup\n"); + return; + } + + ret = dmar_table_init(); + if (ret) { + printk(KERN_INFO + "dmar_table_init() failed with %d:\n", ret); + + if (x2apic_preenabled) + panic("x2apic enabled by bios. But IR enabling failed"); + else + printk(KERN_INFO + "Not enabling x2apic,Intr-remapping\n"); + return; + } + + local_irq_save(flags); + mask_8259A(); + save_mask_IO_APIC_setup(); + + ret = enable_intr_remapping(1); + + if (ret && x2apic_preenabled) { + local_irq_restore(flags); + panic("x2apic enabled by bios. But IR enabling failed"); + } + + if (ret) + goto end; + + if (!x2apic) { + x2apic = 1; + apic_ops = &x2apic_ops; + enable_x2apic(); + } +end: + if (ret) + /* + * IR enabling failed + */ + restore_IO_APIC_setup(); + else + reinit_intr_remapped_IO_APIC(x2apic_preenabled); + + unmask_8259A(); + local_irq_restore(flags); + + if (!ret) { + if (!x2apic_preenabled) + printk(KERN_INFO + "Enabled x2apic and interrupt-remapping\n"); + else + printk(KERN_INFO + "Enabled Interrupt-remapping\n"); + } else + printk(KERN_ERR + "Failed to enable Interrupt-remapping and x2apic\n"); +#else + if (!cpu_has_x2apic) + return; + + if (x2apic_preenabled) + panic("x2apic enabled prior OS handover," + " enable CONFIG_INTR_REMAP"); + + printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping " + " and x2apic\n"); +#endif + + return; +} + /* * Detect and enable local APICs on non-SMP boards. * Original code written by Keir Fraser. @@ -872,7 +1190,7 @@ void __init early_init_lapic_mapping(void) * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); } /** @@ -880,6 +1198,11 @@ void __init early_init_lapic_mapping(void) */ void __init init_apic_mappings(void) { + if (x2apic) { + boot_cpu_physical_apicid = read_apic_id(); + return; + } + /* * If no local APIC can be found then set up a fake all * zeroes page to simulate the local APIC and another @@ -899,13 +1222,15 @@ void __init init_apic_mappings(void) * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); } /* * This initializes the IO-APIC and APIC hardware if this is * a UP kernel. */ +int apic_version[MAX_APICS]; + int __init APIC_init_uniprocessor(void) { if (disable_apic) { @@ -918,6 +1243,9 @@ int __init APIC_init_uniprocessor(void) return -1; } + enable_IR_x2apic(); + setup_apic_routing(); + verify_local_APIC(); connect_bsp_APIC(); @@ -1004,17 +1332,57 @@ asmlinkage void smp_error_interrupt(void) } /** - * * connect_bsp_APIC - attach the APIC to the interrupt system - * */ + * connect_bsp_APIC - attach the APIC to the interrupt system + */ void __init connect_bsp_APIC(void) { +#ifdef CONFIG_X86_32 + if (pic_mode) { + /* + * Do not trust the local APIC being empty at bootup. + */ + clear_local_APIC(); + /* + * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's + * local APIC to INT and NMI lines. + */ + apic_printk(APIC_VERBOSE, "leaving PIC mode, " + "enabling APIC mode.\n"); + outb(0x70, 0x22); + outb(0x01, 0x23); + } +#endif enable_apic_mode(); } +/** + * disconnect_bsp_APIC - detach the APIC from the interrupt system + * @virt_wire_setup: indicates, whether virtual wire mode is selected + * + * Virtual wire mode is necessary to deliver legacy interrupts even when the + * APIC is disabled. + */ void disconnect_bsp_APIC(int virt_wire_setup) { + unsigned int value; + +#ifdef CONFIG_X86_32 + if (pic_mode) { + /* + * Put the board back into PIC mode (has an effect only on + * certain older boards). Note that APIC interrupts, including + * IPIs, won't work beyond this point! The only exception are + * INIT IPIs. + */ + apic_printk(APIC_VERBOSE, "disabling APIC mode, " + "entering PIC mode.\n"); + outb(0x70, 0x22); + outb(0x00, 0x23); + return; + } +#endif + /* Go back to Virtual Wire compatibility mode */ - unsigned long value; /* For the spurious interrupt use vector F, and enable it */ value = apic_read(APIC_SPIV); @@ -1040,7 +1408,10 @@ void disconnect_bsp_APIC(int virt_wire_setup) apic_write(APIC_LVT0, APIC_LVT_MASKED); } - /* For LVT1 make it edge triggered, active high, nmi and enabled */ + /* + * For LVT1 make it edge triggered, active high, + * nmi and enabled + */ value = apic_read(APIC_LVT1); value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | @@ -1055,9 +1426,20 @@ void __cpuinit generic_processor_info(int apicid, int version) int cpu; cpumask_t tmp_map; + /* + * Validate version + */ + if (version == 0x0) { + printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + version); + version = 0x10; + } + apic_version[apicid] = version; + if (num_processors >= NR_CPUS) { printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); + " Processor ignored.\n", NR_CPUS); return; } @@ -1077,6 +1459,29 @@ void __cpuinit generic_processor_info(int apicid, int version) if (apicid > max_physical_apicid) max_physical_apicid = apicid; +#ifdef CONFIG_X86_32 + /* + * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y + * but we need to work other dependencies like SMP_SUSPEND etc + * before this can be done without some confusion. + * if (CPU_HOTPLUG_ENABLED || num_processors > 8) + * - Ashok Raj <ashok.raj@intel.com> + */ + if (max_physical_apicid >= 8) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + if (!APIC_XAPIC(version)) { + def_to_bigsmp = 0; + break; + } + /* If P4 and above fall through */ + case X86_VENDOR_AMD: + def_to_bigsmp = 1; + } + } +#endif + +#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64) /* are we being called early in kernel startup? */ if (early_per_cpu_ptr(x86_cpu_to_apicid)) { u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); @@ -1088,20 +1493,28 @@ void __cpuinit generic_processor_info(int apicid, int version) per_cpu(x86_cpu_to_apicid, cpu) = apicid; per_cpu(x86_bios_cpu_apicid, cpu) = apicid; } +#endif cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); } +int hard_smp_processor_id(void) +{ + return read_apic_id(); +} + /* * Power management */ #ifdef CONFIG_PM static struct { - /* 'active' is true if the local APIC was enabled by us and - not the BIOS; this signifies that we are also responsible - for disabling it before entering apm/acpi suspend */ + /* + * 'active' is true if the local APIC was enabled by us and + * not the BIOS; this signifies that we are also responsible + * for disabling it before entering apm/acpi suspend + */ int active; /* r/w apic fields */ unsigned int apic_id; @@ -1129,7 +1542,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) maxlvt = lapic_get_maxlvt(); - apic_pm_state.apic_id = read_apic_id(); + apic_pm_state.apic_id = apic_read(APIC_ID); apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); apic_pm_state.apic_ldr = apic_read(APIC_LDR); apic_pm_state.apic_dfr = apic_read(APIC_DFR); @@ -1142,10 +1555,11 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); apic_pm_state.apic_tmict = apic_read(APIC_TMICT); apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_INTEL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif + local_irq_save(flags); disable_local_APIC(); local_irq_restore(flags); @@ -1164,10 +1578,25 @@ static int lapic_resume(struct sys_device *dev) maxlvt = lapic_get_maxlvt(); local_irq_save(flags); - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); + +#ifdef CONFIG_X86_64 + if (x2apic) + enable_x2apic(); + else +#endif + { + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } + apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); apic_write(APIC_ID, apic_pm_state.apic_id); apic_write(APIC_DFR, apic_pm_state.apic_dfr); @@ -1176,7 +1605,7 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_SPIV, apic_pm_state.apic_spiv); apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_INTEL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); #endif @@ -1190,10 +1619,17 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); apic_write(APIC_ESR, 0); apic_read(APIC_ESR); + local_irq_restore(flags); + return 0; } +/* + * This device has no shutdown method - fully functioning local APICs + * are needed on every CPU up until machine_halt/restart/poweroff. + */ + static struct sysdev_class lapic_sysclass = { .name = "lapic", .resume = lapic_resume, @@ -1307,31 +1743,19 @@ __cpuinit int apic_is_clustered_box(void) return (clusters > 2); } -/* - * APIC command line parameters - */ -static int __init apic_set_verbosity(char *str) +static __init int setup_nox2apic(char *str) { - if (str == NULL) { - skip_ioapic_setup = 0; - ioapic_force = 1; - return 0; - } - if (strcmp("debug", str) == 0) - apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) - apic_verbosity = APIC_VERBOSE; - else { - printk(KERN_WARNING "APIC Verbosity level %s not recognised" - " use apic=verbose or apic=debug\n", str); - return -EINVAL; - } - + disable_x2apic = 1; + clear_cpu_cap(&boot_cpu_data, X86_FEATURE_X2APIC); return 0; } -early_param("apic", apic_set_verbosity); +early_param("nox2apic", setup_nox2apic); + -static __init int setup_disableapic(char *str) +/* + * APIC command line parameters + */ +static int __init setup_disableapic(char *arg) { disable_apic = 1; setup_clear_cpu_cap(X86_FEATURE_APIC); @@ -1340,9 +1764,9 @@ static __init int setup_disableapic(char *str) early_param("disableapic", setup_disableapic); /* same as disableapic, for compatibility */ -static __init int setup_nolapic(char *str) +static int __init setup_nolapic(char *arg) { - return setup_disableapic(str); + return setup_disableapic(arg); } early_param("nolapic", setup_nolapic); @@ -1353,14 +1777,19 @@ static int __init parse_lapic_timer_c2_ok(char *arg) } early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); -static __init int setup_noapictimer(char *str) +static int __init parse_disable_apic_timer(char *arg) { - if (str[0] != ' ' && str[0] != 0) - return 0; disable_apic_timer = 1; - return 1; + return 0; } -__setup("noapictimer", setup_noapictimer); +early_param("noapictimer", parse_disable_apic_timer); + +static int __init parse_nolapic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("nolapic_timer", parse_nolapic_timer); static __init int setup_apicpmtimer(char *s) { @@ -1370,6 +1799,31 @@ static __init int setup_apicpmtimer(char *s) } __setup("apicpmtimer", setup_apicpmtimer); +static int __init apic_set_verbosity(char *arg) +{ + if (!arg) { +#ifdef CONFIG_X86_64 + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; +#endif + return -EINVAL; + } + + if (strcmp("debug", arg) == 0) + apic_verbosity = APIC_DEBUG; + else if (strcmp("verbose", arg) == 0) + apic_verbosity = APIC_VERBOSE; + else { + printk(KERN_WARNING "APIC Verbosity level %s not recognised" + " use apic=verbose or apic=debug\n", arg); + return -EINVAL; + } + + return 0; +} +early_param("apic", apic_set_verbosity); + static int __init lapic_insert_resource(void) { if (!apic_phys) diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c index 305b465889b..43f1aa51da5 100644 --- a/arch/x86/kernel/cpu/common_64.c +++ b/arch/x86/kernel/cpu/common_64.c @@ -687,6 +687,8 @@ void __cpuinit cpu_init(void) barrier(); check_efer(); + if (cpu != 0 && x2apic) + enable_x2apic(); /* * set up and load the per-CPU TSS diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c index c9017799497..b96b69545fb 100644 --- a/arch/x86/kernel/cpu/feature_names.c +++ b/arch/x86/kernel/cpu/feature_names.c @@ -46,7 +46,7 @@ const char * const x86_cap_flags[NCAPINTS*32] = { /* Intel-defined (#2) */ "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est", "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL, - NULL, NULL, "dca", "sse4_1", "sse4_2", NULL, NULL, "popcnt", + NULL, NULL, "dca", "sse4_1", "sse4_2", "x2apic", NULL, "popcnt", NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, /* VIA/Cyrix/Centaur-defined */ diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c index eaff0bbb144..6c9bfc9e1e9 100644 --- a/arch/x86/kernel/genapic_64.c +++ b/arch/x86/kernel/genapic_64.c @@ -16,87 +16,63 @@ #include <linux/ctype.h> #include <linux/init.h> #include <linux/hardirq.h> +#include <linux/dmar.h> #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> -#ifdef CONFIG_ACPI -#include <acpi/acpi_bus.h> -#endif - -DEFINE_PER_CPU(int, x2apic_extra_bits); +extern struct genapic apic_flat; +extern struct genapic apic_physflat; +extern struct genapic apic_x2xpic_uv_x; +extern struct genapic apic_x2apic_phys; +extern struct genapic apic_x2apic_cluster; struct genapic __read_mostly *genapic = &apic_flat; -static enum uv_system_type uv_system_type; +static struct genapic *apic_probe[] __initdata = { + &apic_x2apic_uv_x, + &apic_x2apic_phys, + &apic_x2apic_cluster, + &apic_physflat, + NULL, +}; /* * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode. */ void __init setup_apic_routing(void) { - if (uv_system_type == UV_NON_UNIQUE_APIC) - genapic = &apic_x2apic_uv_x; - else -#ifdef CONFIG_ACPI - /* - * Quirk: some x86_64 machines can only use physical APIC mode - * regardless of how many processors are present (x86_64 ES7000 - * is an example). - */ - if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && - (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) - genapic = &apic_physflat; - else -#endif - - if (max_physical_apicid < 8) - genapic = &apic_flat; - else - genapic = &apic_physflat; + if (genapic == &apic_x2apic_phys || genapic == &apic_x2apic_cluster) { + if (!intr_remapping_enabled) + genapic = &apic_flat; + } - printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name); + if (genapic == &apic_flat) { + if (max_physical_apicid >= 8) + genapic = &apic_physflat; + printk(KERN_INFO "Setting APIC routing to %s\n", genapic->name); + } } /* Same for both flat and physical. */ -void send_IPI_self(int vector) +void apic_send_IPI_self(int vector) { __send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL); } int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - if (!strcmp(oem_id, "SGI")) { - if (!strcmp(oem_table_id, "UVL")) - uv_system_type = UV_LEGACY_APIC; - else if (!strcmp(oem_table_id, "UVX")) - uv_system_type = UV_X2APIC; - else if (!strcmp(oem_table_id, "UVH")) - uv_system_type = UV_NON_UNIQUE_APIC; + int i; + + for (i = 0; apic_probe[i]; ++i) { + if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) { + genapic = apic_probe[i]; + printk(KERN_INFO "Setting APIC routing to %s.\n", + genapic->name); + return 1; + } } return 0; } - -unsigned int read_apic_id(void) -{ - unsigned int id; - - WARN_ON(preemptible() && num_online_cpus() > 1); - id = apic_read(APIC_ID); - if (uv_system_type >= UV_X2APIC) - id |= __get_cpu_var(x2apic_extra_bits); - return id; -} - -enum uv_system_type get_uv_system_type(void) -{ - return uv_system_type; -} - -int is_uv_system(void) -{ - return uv_system_type != UV_NONE; -} -EXPORT_SYMBOL_GPL(is_uv_system); diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c index 786548a62d3..9eca5ba7a6b 100644 --- a/arch/x86/kernel/genapic_flat_64.c +++ b/arch/x86/kernel/genapic_flat_64.c @@ -15,9 +15,20 @@ #include <linux/kernel.h> #include <linux/ctype.h> #include <linux/init.h> +#include <linux/hardirq.h> #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> +#include <mach_apicdef.h> + +#ifdef CONFIG_ACPI +#include <acpi/acpi_bus.h> +#endif + +static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + return 1; +} static cpumask_t flat_target_cpus(void) { @@ -95,9 +106,33 @@ static void flat_send_IPI_all(int vector) __send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL); } +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + id = (((x)>>24) & 0xFFu); + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + x = ((id & 0xFFu)<<24); + return x; +} + +static unsigned int read_xapic_id(void) +{ + unsigned int id; + + id = get_apic_id(apic_read(APIC_ID)); + return id; +} + static int flat_apic_id_registered(void) { - return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map); + return physid_isset(read_xapic_id(), phys_cpu_present_map); } static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask) @@ -112,6 +147,7 @@ static unsigned int phys_pkg_id(int index_msb) struct genapic apic_flat = { .name = "flat", + .acpi_madt_oem_check = flat_acpi_madt_oem_check, .int_delivery_mode = dest_LowestPrio, .int_dest_mode = (APIC_DEST_LOGICAL != 0), .target_cpus = flat_target_cpus, @@ -121,8 +157,12 @@ struct genapic apic_flat = { .send_IPI_all = flat_send_IPI_all, .send_IPI_allbutself = flat_send_IPI_allbutself, .send_IPI_mask = flat_send_IPI_mask, + .send_IPI_self = apic_send_IPI_self, .cpu_mask_to_apicid = flat_cpu_mask_to_apicid, .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFu<<24), }; /* @@ -130,6 +170,21 @@ struct genapic apic_flat = { * We cannot use logical delivery in this case because the mask * overflows, so use physical mode. */ +static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ +#ifdef CONFIG_ACPI + /* + * Quirk: some x86_64 machines can only use physical APIC mode + * regardless of how many processors are present (x86_64 ES7000 + * is an example). + */ + if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID && + (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) + return 1; +#endif + + return 0; +} static cpumask_t physflat_target_cpus(void) { @@ -176,6 +231,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask) struct genapic apic_physflat = { .name = "physical flat", + .acpi_madt_oem_check = physflat_acpi_madt_oem_check, .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), .target_cpus = physflat_target_cpus, @@ -185,6 +241,10 @@ struct genapic apic_physflat = { .send_IPI_all = physflat_send_IPI_all, .send_IPI_allbutself = physflat_send_IPI_allbutself, .send_IPI_mask = physflat_send_IPI_mask, + .send_IPI_self = apic_send_IPI_self, .cpu_mask_to_apicid = physflat_cpu_mask_to_apicid, .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFu<<24), }; diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c new file mode 100644 index 00000000000..fed9f68efd6 --- /dev/null +++ b/arch/x86/kernel/genx2apic_cluster.c @@ -0,0 +1,164 @@ +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/dmar.h> + +#include <asm/smp.h> +#include <asm/ipi.h> +#include <asm/genapic.h> + +DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid); + +static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (cpu_has_x2apic) + return 1; + + return 0; +} + +/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ + +static cpumask_t x2apic_target_cpus(void) +{ + return cpumask_of_cpu(0); +} + +/* + * for now each logical cpu is in its own vector allocation domain. + */ +static cpumask_t x2apic_vector_allocation_domain(int cpu) +{ + cpumask_t domain = CPU_MASK_NONE; + cpu_set(cpu, domain); + return domain; +} + +static void __x2apic_send_IPI_dest(unsigned int apicid, int vector, + unsigned int dest) +{ + unsigned long cfg; + + cfg = __prepare_ICR(0, vector, dest); + + /* + * send the IPI. + */ + x2apic_icr_write(cfg, apicid); +} + +/* + * for now, we send the IPI's one by one in the cpumask. + * TBD: Based on the cpu mask, we can send the IPI's to the cluster group + * at once. We have 16 cpu's in a cluster. This will minimize IPI register + * writes. + */ +static void x2apic_send_IPI_mask(cpumask_t mask, int vector) +{ + unsigned long flags; + unsigned long query_cpu; + + local_irq_save(flags); + for_each_cpu_mask(query_cpu, mask) { + __x2apic_send_IPI_dest(per_cpu(x86_cpu_to_logical_apicid, query_cpu), + vector, APIC_DEST_LOGICAL); + } + local_irq_restore(flags); +} + +static void x2apic_send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + x2apic_send_IPI_mask(mask, vector); +} + +static void x2apic_send_IPI_all(int vector) +{ + x2apic_send_IPI_mask(cpu_online_map, vector); +} + +static int x2apic_apic_id_registered(void) +{ + return 1; +} + +static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask) +{ + int cpu; + + /* + * We're using fixed IRQ delivery, can only return one phys APIC ID. + * May as well be the first. + */ + cpu = first_cpu(cpumask); + if ((unsigned)cpu < NR_CPUS) + return per_cpu(x86_cpu_to_logical_apicid, cpu); + else + return BAD_APICID; +} + +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + id = x; + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + x = id; + return x; +} + +static unsigned int x2apic_read_id(void) +{ + return apic_read(APIC_ID); +} + +static unsigned int phys_pkg_id(int index_msb) +{ + return x2apic_read_id() >> index_msb; +} + +static void x2apic_send_IPI_self(int vector) +{ + apic_write(APIC_SELF_IPI, vector); +} + +static void init_x2apic_ldr(void) +{ + int cpu = smp_processor_id(); + + per_cpu(x86_cpu_to_logical_apicid, cpu) = apic_read(APIC_LDR); + return; +} + +struct genapic apic_x2apic_cluster = { + .name = "cluster x2apic", + .acpi_madt_oem_check = x2apic_acpi_madt_oem_check, + .int_delivery_mode = dest_LowestPrio, + .int_dest_mode = (APIC_DEST_LOGICAL != 0), + .target_cpus = x2apic_target_cpus, + .vector_allocation_domain = x2apic_vector_allocation_domain, + .apic_id_registered = x2apic_apic_id_registered, + .init_apic_ldr = init_x2apic_ldr, + .send_IPI_all = x2apic_send_IPI_all, + .send_IPI_allbutself = x2apic_send_IPI_allbutself, + .send_IPI_mask = x2apic_send_IPI_mask, + .send_IPI_self = x2apic_send_IPI_self, + .cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid, + .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFFFFFFFu), +}; diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c new file mode 100644 index 00000000000..958d537b4cc --- /dev/null +++ b/arch/x86/kernel/genx2apic_phys.c @@ -0,0 +1,159 @@ +#include <linux/threads.h> +#include <linux/cpumask.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/dmar.h> + +#include <asm/smp.h> +#include <asm/ipi.h> +#include <asm/genapic.h> + +static int x2apic_phys; + +static int set_x2apic_phys_mode(char *arg) +{ + x2apic_phys = 1; + return 0; +} +early_param("x2apic_phys", set_x2apic_phys_mode); + +static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (cpu_has_x2apic && x2apic_phys) + return 1; + + return 0; +} + +/* Start with all IRQs pointing to boot CPU. IRQ balancing will shift them. */ + +static cpumask_t x2apic_target_cpus(void) +{ + return cpumask_of_cpu(0); +} + +static cpumask_t x2apic_vector_allocation_domain(int cpu) +{ + cpumask_t domain = CPU_MASK_NONE; + cpu_set(cpu, domain); + return domain; +} + +static void __x2apic_send_IPI_dest(unsigned int apicid, int vector, + unsigned int dest) +{ + unsigned long cfg; + + cfg = __prepare_ICR(0, vector, dest); + + /* + * send the IPI. + */ + x2apic_icr_write(cfg, apicid); +} + +static void x2apic_send_IPI_mask(cpumask_t mask, int vector) +{ + unsigned long flags; + unsigned long query_cpu; + + local_irq_save(flags); + for_each_cpu_mask(query_cpu, mask) { + __x2apic_send_IPI_dest(per_cpu(x86_cpu_to_apicid, query_cpu), + vector, APIC_DEST_PHYSICAL); + } + local_irq_restore(flags); +} + +static void x2apic_send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + x2apic_send_IPI_mask(mask, vector); +} + +static void x2apic_send_IPI_all(int vector) +{ + x2apic_send_IPI_mask(cpu_online_map, vector); +} + +static int x2apic_apic_id_registered(void) +{ + return 1; +} + +static unsigned int x2apic_cpu_mask_to_apicid(cpumask_t cpumask) +{ + int cpu; + + /* + * We're using fixed IRQ delivery, can only return one phys APIC ID. + * May as well be the first. + */ + cpu = first_cpu(cpumask); + if ((unsigned)cpu < NR_CPUS) + return per_cpu(x86_cpu_to_apicid, cpu); + else + return BAD_APICID; +} + +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + id = x; + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + x = id; + return x; +} + +static unsigned int x2apic_read_id(void) +{ + return apic_read(APIC_ID); +} + +static unsigned int phys_pkg_id(int index_msb) +{ + return x2apic_read_id() >> index_msb; +} + +void x2apic_send_IPI_self(int vector) +{ + apic_write(APIC_SELF_IPI, vector); +} + +void init_x2apic_ldr(void) +{ + return; +} + +struct genapic apic_x2apic_phys = { + .name = "physical x2apic", + .acpi_madt_oem_check = x2apic_acpi_madt_oem_check, + .int_delivery_mode = dest_Fixed, + .int_dest_mode = (APIC_DEST_PHYSICAL != 0), + .target_cpus = x2apic_target_cpus, + .vector_allocation_domain = x2apic_vector_allocation_domain, + .apic_id_registered = x2apic_apic_id_registered, + .init_apic_ldr = init_x2apic_ldr, + .send_IPI_all = x2apic_send_IPI_all, + .send_IPI_allbutself = x2apic_send_IPI_allbutself, + .send_IPI_mask = x2apic_send_IPI_mask, + .send_IPI_self = x2apic_send_IPI_self, + .cpu_mask_to_apicid = x2apic_cpu_mask_to_apicid, + .phys_pkg_id = phys_pkg_id, + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFFFFFFFu), +}; diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c index bfa837cb16b..ae2ffc8a400 100644 --- a/arch/x86/kernel/genx2apic_uv_x.c +++ b/arch/x86/kernel/genx2apic_uv_x.c @@ -12,12 +12,12 @@ #include <linux/threads.h> #include <linux/cpumask.h> #include <linux/string.h> -#include <linux/kernel.h> #include <linux/ctype.h> #include <linux/init.h> #include <linux/sched.h> #include <linux/bootmem.h> #include <linux/module.h> +#include <linux/hardirq.h> #include <asm/smp.h> #include <asm/ipi.h> #include <asm/genapic.h> @@ -26,6 +26,36 @@ #include <asm/uv/uv_hub.h> #include <asm/uv/bios.h> +DEFINE_PER_CPU(int, x2apic_extra_bits); + +static enum uv_system_type uv_system_type; + +static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +{ + if (!strcmp(oem_id, "SGI")) { + if (!strcmp(oem_table_id, "UVL")) + uv_system_type = UV_LEGACY_APIC; + else if (!strcmp(oem_table_id, "UVX")) + uv_system_type = UV_X2APIC; + else if (!strcmp(oem_table_id, "UVH")) { + uv_system_type = UV_NON_UNIQUE_APIC; + return 1; + } + } + return 0; +} + +enum uv_system_type get_uv_system_type(void) +{ + return uv_system_type; +} + +int is_uv_system(void) +{ + return uv_system_type != UV_NONE; +} +EXPORT_SYMBOL_GPL(is_uv_system); + DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info); @@ -123,6 +153,10 @@ static int uv_apic_id_registered(void) return 1; } +static void uv_init_apic_ldr(void) +{ +} + static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask) { int cpu; @@ -138,9 +172,34 @@ static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask) return BAD_APICID; } +static unsigned int get_apic_id(unsigned long x) +{ + unsigned int id; + + WARN_ON(preemptible() && num_online_cpus() > 1); + id = x | __get_cpu_var(x2apic_extra_bits); + + return id; +} + +static unsigned long set_apic_id(unsigned int id) +{ + unsigned long x; + + /* maskout x2apic_extra_bits ? */ + x = id; + return x; +} + +static unsigned int uv_read_apic_id(void) +{ + + return get_apic_id(apic_read(APIC_ID)); +} + static unsigned int phys_pkg_id(int index_msb) { - return GET_APIC_ID(read_apic_id()) >> index_msb; + return uv_read_apic_id() >> index_msb; } #ifdef ZZZ /* Needs x2apic patch */ @@ -152,17 +211,22 @@ static void uv_send_IPI_self(int vector) struct genapic apic_x2apic_uv_x = { .name = "UV large system", + .acpi_madt_oem_check = uv_acpi_madt_oem_check, .int_delivery_mode = dest_Fixed, .int_dest_mode = (APIC_DEST_PHYSICAL != 0), .target_cpus = uv_target_cpus, .vector_allocation_domain = uv_vector_allocation_domain,/* Fixme ZZZ */ .apic_id_registered = uv_apic_id_registered, + .init_apic_ldr = uv_init_apic_ldr, .send_IPI_all = uv_send_IPI_all, .send_IPI_allbutself = uv_send_IPI_allbutself, .send_IPI_mask = uv_send_IPI_mask, /* ZZZ.send_IPI_self = uv_send_IPI_self, */ .cpu_mask_to_apicid = uv_cpu_mask_to_apicid, .phys_pkg_id = phys_pkg_id, /* Fixme ZZZ */ + .get_apic_id = get_apic_id, + .set_apic_id = set_apic_id, + .apic_id_mask = (0xFFFFFFFFu), }; static __cpuinit void set_x2apic_extra_bits(int pnode) @@ -401,3 +465,5 @@ void __cpuinit uv_cpu_init(void) if (get_uv_system_type() == UV_NON_UNIQUE_APIC) set_x2apic_extra_bits(uv_hub_info->pnode); } + + diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index dc92b49d920..4b8a53d841f 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -282,6 +282,30 @@ static int __init i8259A_init_sysfs(void) device_initcall(i8259A_init_sysfs); +void mask_8259A(void) +{ + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void unmask_8259A(void) +{ + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} + void init_8259A(int auto_eoi) { unsigned long flags; diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 09cddb57bec..e710289f673 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -46,10 +46,13 @@ #include <asm/nmi.h> #include <asm/msidef.h> #include <asm/hypertransport.h> +#include <asm/setup.h> #include <mach_apic.h> #include <mach_apicdef.h> +#define __apicdebuginit(type) static type __init + int (*ioapic_renumber_irq)(int ioapic, int irq); atomic_t irq_mis_count; @@ -1341,7 +1344,8 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, ioapic_write_entry(apic, pin, entry); } -void __init print_IO_APIC(void) + +__apicdebuginit(void) print_IO_APIC(void) { int apic, i; union IO_APIC_reg_00 reg_00; @@ -1456,9 +1460,7 @@ void __init print_IO_APIC(void) return; } -#if 0 - -static void print_APIC_bitfield(int base) +__apicdebuginit(void) print_APIC_bitfield(int base) { unsigned int v; int i, j; @@ -1479,9 +1481,10 @@ static void print_APIC_bitfield(int base) } } -void /*__init*/ print_local_APIC(void *dummy) +__apicdebuginit(void) print_local_APIC(void *dummy) { unsigned int v, ver, maxlvt; + u64 icr; if (apic_verbosity == APIC_QUIET) return; @@ -1490,7 +1493,7 @@ void /*__init*/ print_local_APIC(void *dummy) smp_processor_id(), hard_smp_processor_id()); v = apic_read(APIC_ID); printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, - GET_APIC_ID(read_apic_id())); + GET_APIC_ID(v)); v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); ver = GET_APIC_VERSION(v); @@ -1532,10 +1535,9 @@ void /*__init*/ print_local_APIC(void *dummy) printk(KERN_DEBUG "... APIC ESR: %08x\n", v); } - v = apic_read(APIC_ICR); - printk(KERN_DEBUG "... APIC ICR: %08x\n", v); - v = apic_read(APIC_ICR2); - printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); + icr = apic_icr_read(); + printk(KERN_DEBUG "... APIC ICR: %08x\n", icr); + printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32); v = apic_read(APIC_LVTT); printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); @@ -1563,12 +1565,12 @@ void /*__init*/ print_local_APIC(void *dummy) printk("\n"); } -void print_all_local_APICs(void) +__apicdebuginit(void) print_all_local_APICs(void) { on_each_cpu(print_local_APIC, NULL, 1); } -void /*__init*/ print_PIC(void) +__apicdebuginit(void) print_PIC(void) { unsigned int v; unsigned long flags; @@ -1600,7 +1602,17 @@ void /*__init*/ print_PIC(void) printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); } -#endif /* 0 */ +__apicdebuginit(int) print_all_ICs(void) +{ + print_PIC(); + print_all_local_APICs(); + print_IO_APIC(); + + return 0; +} + +fs_initcall(print_all_ICs); + static void __init enable_IO_APIC(void) { @@ -1698,8 +1710,7 @@ void disable_IO_APIC(void) entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; - entry.dest.physical.physical_dest = - GET_APIC_ID(read_apic_id()); + entry.dest.physical.physical_dest = read_apic_id(); /* * Add it to the IO-APIC irq-routing table: @@ -1725,10 +1736,8 @@ static void __init setup_ioapic_ids_from_mpc(void) unsigned char old_id; unsigned long flags; -#ifdef CONFIG_X86_NUMAQ - if (found_numaq) + if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids()) return; -#endif /* * Don't check I/O APIC IDs for xAPIC systems. They have @@ -2329,8 +2338,6 @@ void __init setup_IO_APIC(void) setup_IO_APIC_irqs(); init_IO_APIC_traps(); check_timer(); - if (!acpi_ioapic) - print_IO_APIC(); } /* diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 61a83b70c18..a1bec2969c6 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -37,6 +37,7 @@ #include <acpi/acpi_bus.h> #endif #include <linux/bootmem.h> +#include <linux/dmar.h> #include <asm/idle.h> #include <asm/io.h> @@ -49,10 +50,13 @@ #include <asm/nmi.h> #include <asm/msidef.h> #include <asm/hypertransport.h> +#include <asm/irq_remapping.h> #include <mach_ipi.h> #include <mach_apic.h> +#define __apicdebuginit(type) static type __init + struct irq_cfg { cpumask_t domain; cpumask_t old_domain; @@ -87,8 +91,6 @@ int first_system_vector = 0xfe; char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; -#define __apicdebuginit __init - int sis_apic_bug; /* not actually supported, dummy for compile */ static int no_timer_check; @@ -108,6 +110,9 @@ static DEFINE_SPINLOCK(vector_lock); */ int nr_ioapic_registers[MAX_IO_APICS]; +/* I/O APIC RTE contents at the OS boot up */ +struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS]; + /* I/O APIC entries */ struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; @@ -303,7 +308,12 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) pin = entry->pin; if (pin == -1) break; - io_apic_write(apic, 0x11 + pin*2, dest); + /* + * With interrupt-remapping, destination information comes + * from interrupt-remapping table entry. + */ + if (!irq_remapped(irq)) + io_apic_write(apic, 0x11 + pin*2, dest); reg = io_apic_read(apic, 0x10 + pin*2); reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; @@ -440,6 +450,69 @@ static void clear_IO_APIC (void) clear_IO_APIC_pin(apic, pin); } +/* + * Saves and masks all the unmasked IO-APIC RTE's + */ +int save_mask_IO_APIC_setup(void) +{ + union IO_APIC_reg_01 reg_01; + unsigned long flags; + int apic, pin; + + /* + * The number of IO-APIC IRQ registers (== #pins): + */ + for (apic = 0; apic < nr_ioapics; apic++) { + spin_lock_irqsave(&ioapic_lock, flags); + reg_01.raw = io_apic_read(apic, 1); + spin_unlock_irqrestore(&ioapic_lock, flags); + nr_ioapic_registers[apic] = reg_01.bits.entries+1; + } + + for (apic = 0; apic < nr_ioapics; apic++) { + early_ioapic_entries[apic] = + kzalloc(sizeof(struct IO_APIC_route_entry) * + nr_ioapic_registers[apic], GFP_KERNEL); + if (!early_ioapic_entries[apic]) + return -ENOMEM; + } + + for (apic = 0; apic < nr_ioapics; apic++) + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { + struct IO_APIC_route_entry entry; + + entry = early_ioapic_entries[apic][pin] = + ioapic_read_entry(apic, pin); + if (!entry.mask) { + entry.mask = 1; + ioapic_write_entry(apic, pin, entry); + } + } + return 0; +} + +void restore_IO_APIC_setup(void) +{ + int apic, pin; + + for (apic = 0; apic < nr_ioapics; apic++) + for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) + ioapic_write_entry(apic, pin, + early_ioapic_entries[apic][pin]); +} + +void reinit_intr_remapped_IO_APIC(int intr_remapping) +{ + /* + * for now plain restore of previous settings. + * TBD: In the case of OS enabling interrupt-remapping, + * IO-APIC RTE's need to be setup to point to interrupt-remapping + * table entries. for now, do a plain restore, and wait for + * the setup_IO_APIC_irqs() to do proper initialization. + */ + restore_IO_APIC_setup(); +} + int skip_ioapic_setup; int ioapic_force; @@ -839,18 +912,98 @@ void __setup_vector_irq(int cpu) } static struct irq_chip ioapic_chip; +#ifdef CONFIG_INTR_REMAP +static struct irq_chip ir_ioapic_chip; +#endif static void ioapic_register_intr(int irq, unsigned long trigger) { - if (trigger) { + if (trigger) irq_desc[irq].status |= IRQ_LEVEL; - set_irq_chip_and_handler_name(irq, &ioapic_chip, - handle_fasteoi_irq, "fasteoi"); - } else { + else irq_desc[irq].status &= ~IRQ_LEVEL; + +#ifdef CONFIG_INTR_REMAP + if (irq_remapped(irq)) { + irq_desc[irq].status |= IRQ_MOVE_PCNTXT; + if (trigger) + set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, + handle_fasteoi_irq, + "fasteoi"); + else + set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, + handle_edge_irq, "edge"); + return; + } +#endif + if (trigger) + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_fasteoi_irq, + "fasteoi"); + else set_irq_chip_and_handler_name(irq, &ioapic_chip, handle_edge_irq, "edge"); +} + +static int setup_ioapic_entry(int apic, int irq, + struct IO_APIC_route_entry *entry, + unsigned int destination, int trigger, + int polarity, int vector) +{ + /* + * add it to the IO-APIC irq-routing table: + */ + memset(entry,0,sizeof(*entry)); + +#ifdef CONFIG_INTR_REMAP + if (intr_remapping_enabled) { + struct intel_iommu *iommu = map_ioapic_to_ir(apic); + struct irte irte; + struct IR_IO_APIC_route_entry *ir_entry = + (struct IR_IO_APIC_route_entry *) entry; + int index; + + if (!iommu) + panic("No mapping iommu for ioapic %d\n", apic); + + index = alloc_irte(iommu, irq, 1); + if (index < 0) + panic("Failed to allocate IRTE for ioapic %d\n", apic); + + memset(&irte, 0, sizeof(irte)); + + irte.present = 1; + irte.dst_mode = INT_DEST_MODE; + irte.trigger_mode = trigger; + irte.dlvry_mode = INT_DELIVERY_MODE; + irte.vector = vector; + irte.dest_id = IRTE_DEST(destination); + + modify_irte(irq, &irte); + + ir_entry->index2 = (index >> 15) & 0x1; + ir_entry->zero = 0; + ir_entry->format = 1; + ir_entry->index = (index & 0x7fff); + } else +#endif + { + entry->delivery_mode = INT_DELIVERY_MODE; + entry->dest_mode = INT_DEST_MODE; + entry->dest = destination; } + + entry->mask = 0; /* enable IRQ */ + entry->trigger = trigger; + entry->polarity = polarity; + entry->vector = vector; + + /* Mask level triggered irqs. + * Use IRQ_DELAYED_DISABLE for edge triggered irqs. + */ + if (trigger) + entry->mask = 1; + return 0; } static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, @@ -875,24 +1028,15 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector, irq, trigger, polarity); - /* - * add it to the IO-APIC irq-routing table: - */ - memset(&entry,0,sizeof(entry)); - - entry.delivery_mode = INT_DELIVERY_MODE; - entry.dest_mode = INT_DEST_MODE; - entry.dest = cpu_mask_to_apicid(mask); - entry.mask = 0; /* enable IRQ */ - entry.trigger = trigger; - entry.polarity = polarity; - entry.vector = cfg->vector; - /* Mask level triggered irqs. - * Use IRQ_DELAYED_DISABLE for edge triggered irqs. - */ - if (trigger) - entry.mask = 1; + if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry, + cpu_mask_to_apicid(mask), trigger, polarity, + cfg->vector)) { + printk("Failed to setup ioapic entry for ioapic %d, pin %d\n", + mp_ioapics[apic].mp_apicid, pin); + __clear_irq_vector(irq); + return; + } ioapic_register_intr(irq, trigger); if (irq < 16) @@ -944,6 +1088,9 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, { struct IO_APIC_route_entry entry; + if (intr_remapping_enabled) + return; + memset(&entry, 0, sizeof(entry)); /* @@ -970,7 +1117,8 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, ioapic_write_entry(apic, pin, entry); } -void __apicdebuginit print_IO_APIC(void) + +__apicdebuginit(void) print_IO_APIC(void) { int apic, i; union IO_APIC_reg_00 reg_00; @@ -1064,9 +1212,7 @@ void __apicdebuginit print_IO_APIC(void) return; } -#if 0 - -static __apicdebuginit void print_APIC_bitfield (int base) +__apicdebuginit(void) print_APIC_bitfield(int base) { unsigned int v; int i, j; @@ -1087,9 +1233,10 @@ static __apicdebuginit void print_APIC_bitfield (int base) } } -void __apicdebuginit print_local_APIC(void * dummy) +__apicdebuginit(void) print_local_APIC(void *dummy) { unsigned int v, ver, maxlvt; + unsigned long icr; if (apic_verbosity == APIC_QUIET) return; @@ -1097,7 +1244,7 @@ void __apicdebuginit print_local_APIC(void * dummy) printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", smp_processor_id(), hard_smp_processor_id()); v = apic_read(APIC_ID); - printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(read_apic_id())); + printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id()); v = apic_read(APIC_LVR); printk(KERN_INFO "... APIC VERSION: %08x\n", v); ver = GET_APIC_VERSION(v); @@ -1133,10 +1280,9 @@ void __apicdebuginit print_local_APIC(void * dummy) v = apic_read(APIC_ESR); printk(KERN_DEBUG "... APIC ESR: %08x\n", v); - v = apic_read(APIC_ICR); - printk(KERN_DEBUG "... APIC ICR: %08x\n", v); - v = apic_read(APIC_ICR2); - printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); + icr = apic_icr_read(); + printk(KERN_DEBUG "... APIC ICR: %08x\n", icr); + printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32); v = apic_read(APIC_LVTT); printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); @@ -1164,12 +1310,12 @@ void __apicdebuginit print_local_APIC(void * dummy) printk("\n"); } -void print_all_local_APICs (void) +__apicdebuginit(void) print_all_local_APICs(void) { on_each_cpu(print_local_APIC, NULL, 1); } -void __apicdebuginit print_PIC(void) +__apicdebuginit(void) print_PIC(void) { unsigned int v; unsigned long flags; @@ -1201,7 +1347,17 @@ void __apicdebuginit print_PIC(void) printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); } -#endif /* 0 */ +__apicdebuginit(int) print_all_ICs(void) +{ + print_PIC(); + print_all_local_APICs(); + print_IO_APIC(); + + return 0; +} + +fs_initcall(print_all_ICs); + void __init enable_IO_APIC(void) { @@ -1291,7 +1447,7 @@ void disable_IO_APIC(void) entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; - entry.dest = GET_APIC_ID(read_apic_id()); + entry.dest = read_apic_id(); /* * Add it to the IO-APIC irq-routing table: @@ -1397,6 +1553,147 @@ static int ioapic_retrigger_irq(unsigned int irq) */ #ifdef CONFIG_SMP + +#ifdef CONFIG_INTR_REMAP +static void ir_irq_migration(struct work_struct *work); + +static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration); + +/* + * Migrate the IO-APIC irq in the presence of intr-remapping. + * + * For edge triggered, irq migration is a simple atomic update(of vector + * and cpu destination) of IRTE and flush the hardware cache. + * + * For level triggered, we need to modify the io-apic RTE aswell with the update + * vector information, along with modifying IRTE with vector and destination. + * So irq migration for level triggered is little bit more complex compared to + * edge triggered migration. But the good news is, we use the same algorithm + * for level triggered migration as we have today, only difference being, + * we now initiate the irq migration from process context instead of the + * interrupt context. + * + * In future, when we do a directed EOI (combined with cpu EOI broadcast + * suppression) to the IO-APIC, level triggered irq migration will also be + * as simple as edge triggered migration and we can do the irq migration + * with a simple atomic update to IO-APIC RTE. + */ +static void migrate_ioapic_irq(int irq, cpumask_t mask) +{ + struct irq_cfg *cfg = irq_cfg + irq; + struct irq_desc *desc = irq_desc + irq; + cpumask_t tmp, cleanup_mask; + struct irte irte; + int modify_ioapic_rte = desc->status & IRQ_LEVEL; + unsigned int dest; + unsigned long flags; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + return; + + if (get_irte(irq, &irte)) + return; + + if (assign_irq_vector(irq, mask)) + return; + + cpus_and(tmp, cfg->domain, mask); + dest = cpu_mask_to_apicid(tmp); + + if (modify_ioapic_rte) { + spin_lock_irqsave(&ioapic_lock, flags); + __target_IO_APIC_irq(irq, dest, cfg->vector); + spin_unlock_irqrestore(&ioapic_lock, flags); + } + + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + /* + * Modified the IRTE and flushes the Interrupt entry cache. + */ + modify_irte(irq, &irte); + + if (cfg->move_in_progress) { + cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); + cfg->move_cleanup_count = cpus_weight(cleanup_mask); + send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); + cfg->move_in_progress = 0; + } + + irq_desc[irq].affinity = mask; +} + +static int migrate_irq_remapped_level(int irq) +{ + int ret = -1; + + mask_IO_APIC_irq(irq); + + if (io_apic_level_ack_pending(irq)) { + /* + * Interrupt in progress. Migrating irq now will change the + * vector information in the IO-APIC RTE and that will confuse + * the EOI broadcast performed by cpu. + * So, delay the irq migration to the next instance. + */ + schedule_delayed_work(&ir_migration_work, 1); + goto unmask; + } + + /* everthing is clear. we have right of way */ + migrate_ioapic_irq(irq, irq_desc[irq].pending_mask); + + ret = 0; + irq_desc[irq].status &= ~IRQ_MOVE_PENDING; + cpus_clear(irq_desc[irq].pending_mask); + +unmask: + unmask_IO_APIC_irq(irq); + return ret; +} + +static void ir_irq_migration(struct work_struct *work) +{ + int irq; + + for (irq = 0; irq < NR_IRQS; irq++) { + struct irq_desc *desc = irq_desc + irq; + if (desc->status & IRQ_MOVE_PENDING) { + unsigned long flags; + + spin_lock_irqsave(&desc->lock, flags); + if (!desc->chip->set_affinity || + !(desc->status & IRQ_MOVE_PENDING)) { + desc->status &= ~IRQ_MOVE_PENDING; + spin_unlock_irqrestore(&desc->lock, flags); + continue; + } + + desc->chip->set_affinity(irq, + irq_desc[irq].pending_mask); + spin_unlock_irqrestore(&desc->lock, flags); + } + } +} + +/* + * Migrates the IRQ destination in the process context. + */ +static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) +{ + if (irq_desc[irq].status & IRQ_LEVEL) { + irq_desc[irq].status |= IRQ_MOVE_PENDING; + irq_desc[irq].pending_mask = mask; + migrate_irq_remapped_level(irq); + return; + } + + migrate_ioapic_irq(irq, mask); +} +#endif + asmlinkage void smp_irq_move_cleanup_interrupt(void) { unsigned vector, me; @@ -1453,6 +1750,17 @@ static void irq_complete_move(unsigned int irq) #else static inline void irq_complete_move(unsigned int irq) {} #endif +#ifdef CONFIG_INTR_REMAP +static void ack_x2apic_level(unsigned int irq) +{ + ack_x2APIC_irq(); +} + +static void ack_x2apic_edge(unsigned int irq) +{ + ack_x2APIC_irq(); +} +#endif static void ack_apic_edge(unsigned int irq) { @@ -1527,6 +1835,21 @@ static struct irq_chip ioapic_chip __read_mostly = { .retrigger = ioapic_retrigger_irq, }; +#ifdef CONFIG_INTR_REMAP +static struct irq_chip ir_ioapic_chip __read_mostly = { + .name = "IR-IO-APIC", + .startup = startup_ioapic_irq, + .mask = mask_IO_APIC_irq, + .unmask = unmask_IO_APIC_irq, + .ack = ack_x2apic_edge, + .eoi = ack_x2apic_level, +#ifdef CONFIG_SMP + .set_affinity = set_ir_ioapic_affinity_irq, +#endif + .retrigger = ioapic_retrigger_irq, +}; +#endif + static inline void init_IO_APIC_traps(void) { int irq; @@ -1712,6 +2035,8 @@ static inline void __init check_timer(void) * 8259A. */ if (pin1 == -1) { + if (intr_remapping_enabled) + panic("BIOS bug: timer not connected to IO-APIC"); pin1 = pin2; apic1 = apic2; no_pin1 = 1; @@ -1738,6 +2063,8 @@ static inline void __init check_timer(void) clear_IO_APIC_pin(0, pin1); goto out; } + if (intr_remapping_enabled) + panic("timer doesn't work through Interrupt-remapped IO-APIC"); clear_IO_APIC_pin(apic1, pin1); if (!no_pin1) apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " @@ -1854,8 +2181,6 @@ void __init setup_IO_APIC(void) setup_IO_APIC_irqs(); init_IO_APIC_traps(); check_timer(); - if (!acpi_ioapic) - print_IO_APIC(); } struct sysfs_ioapic_data { @@ -1977,6 +2302,9 @@ void destroy_irq(unsigned int irq) dynamic_irq_cleanup(irq); +#ifdef CONFIG_INTR_REMAP + free_irte(irq); +#endif spin_lock_irqsave(&vector_lock, flags); __clear_irq_vector(irq); spin_unlock_irqrestore(&vector_lock, flags); @@ -1995,11 +2323,42 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms tmp = TARGET_CPUS; err = assign_irq_vector(irq, tmp); - if (!err) { - cpus_and(tmp, cfg->domain, tmp); - dest = cpu_mask_to_apicid(tmp); + if (err) + return err; + + cpus_and(tmp, cfg->domain, tmp); + dest = cpu_mask_to_apicid(tmp); + +#ifdef CONFIG_INTR_REMAP + if (irq_remapped(irq)) { + struct irte irte; + int ir_index; + u16 sub_handle; + + ir_index = map_irq_to_irte_handle(irq, &sub_handle); + BUG_ON(ir_index == -1); + + memset (&irte, 0, sizeof(irte)); + + irte.present = 1; + irte.dst_mode = INT_DEST_MODE; + irte.trigger_mode = 0; /* edge */ + irte.dlvry_mode = INT_DELIVERY_MODE; + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + modify_irte(irq, &irte); msg->address_hi = MSI_ADDR_BASE_HI; + msg->data = sub_handle; + msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT | + MSI_ADDR_IR_SHV | + MSI_ADDR_IR_INDEX1(ir_index) | + MSI_ADDR_IR_INDEX2(ir_index); + } else +#endif + { + msg->address_hi = MSI_ADDR_BASE_HI; msg->address_lo = MSI_ADDR_BASE_LO | ((INT_DEST_MODE == 0) ? @@ -2049,6 +2408,55 @@ static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask) write_msi_msg(irq, &msg); irq_desc[irq].affinity = mask; } + +#ifdef CONFIG_INTR_REMAP +/* + * Migrate the MSI irq to another cpumask. This migration is + * done in the process context using interrupt-remapping hardware. + */ +static void ir_set_msi_irq_affinity(unsigned int irq, cpumask_t mask) +{ + struct irq_cfg *cfg = irq_cfg + irq; + unsigned int dest; + cpumask_t tmp, cleanup_mask; + struct irte irte; + + cpus_and(tmp, mask, cpu_online_map); + if (cpus_empty(tmp)) + return; + + if (get_irte(irq, &irte)) + return; + + if (assign_irq_vector(irq, mask)) + return; + + cpus_and(tmp, cfg->domain, mask); + dest = cpu_mask_to_apicid(tmp); + + irte.vector = cfg->vector; + irte.dest_id = IRTE_DEST(dest); + + /* + * atomically update the IRTE with the new destination and vector. + */ + modify_irte(irq, &irte); + + /* + * After this point, all the interrupts will start arriving + * at the new destination. So, time to cleanup the previous + * vector allocation. + */ + if (cfg->move_in_progress) { + cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); + cfg->move_cleanup_count = cpus_weight(cleanup_mask); + send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); + cfg->move_in_progress = 0; + } + + irq_desc[irq].affinity = mask; +} +#endif #endif /* CONFIG_SMP */ /* @@ -2066,26 +2474,157 @@ static struct irq_chip msi_chip = { .retrigger = ioapic_retrigger_irq, }; -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +#ifdef CONFIG_INTR_REMAP +static struct irq_chip msi_ir_chip = { + .name = "IR-PCI-MSI", + .unmask = unmask_msi_irq, + .mask = mask_msi_irq, + .ack = ack_x2apic_edge, +#ifdef CONFIG_SMP + .set_affinity = ir_set_msi_irq_affinity, +#endif + .retrigger = ioapic_retrigger_irq, +}; + +/* + * Map the PCI dev to the corresponding remapping hardware unit + * and allocate 'nvec' consecutive interrupt-remapping table entries + * in it. + */ +static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec) { + struct intel_iommu *iommu; + int index; + + iommu = map_dev_to_ir(dev); + if (!iommu) { + printk(KERN_ERR + "Unable to map PCI %s to iommu\n", pci_name(dev)); + return -ENOENT; + } + + index = alloc_irte(iommu, irq, nvec); + if (index < 0) { + printk(KERN_ERR + "Unable to allocate %d IRTE for PCI %s\n", nvec, + pci_name(dev)); + return -ENOSPC; + } + return index; +} +#endif + +static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc, int irq) +{ + int ret; struct msi_msg msg; + + ret = msi_compose_msg(dev, irq, &msg); + if (ret < 0) + return ret; + + set_irq_msi(irq, desc); + write_msi_msg(irq, &msg); + +#ifdef CONFIG_INTR_REMAP + if (irq_remapped(irq)) { + struct irq_desc *desc = irq_desc + irq; + /* + * irq migration in process context + */ + desc->status |= IRQ_MOVE_PCNTXT; + set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge"); + } else +#endif + set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); + + return 0; +} + +int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) +{ int irq, ret; + irq = create_irq(); if (irq < 0) return irq; - ret = msi_compose_msg(dev, irq, &msg); +#ifdef CONFIG_INTR_REMAP + if (!intr_remapping_enabled) + goto no_ir; + + ret = msi_alloc_irte(dev, irq, 1); + if (ret < 0) + goto error; +no_ir: +#endif + ret = setup_msi_irq(dev, desc, irq); if (ret < 0) { destroy_irq(irq); return ret; } + return 0; - set_irq_msi(irq, desc); - write_msi_msg(irq, &msg); +#ifdef CONFIG_INTR_REMAP +error: + destroy_irq(irq); + return ret; +#endif +} - set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); +int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + int irq, ret, sub_handle; + struct msi_desc *desc; +#ifdef CONFIG_INTR_REMAP + struct intel_iommu *iommu = 0; + int index = 0; +#endif + + sub_handle = 0; + list_for_each_entry(desc, &dev->msi_list, list) { + irq = create_irq(); + if (irq < 0) + return irq; +#ifdef CONFIG_INTR_REMAP + if (!intr_remapping_enabled) + goto no_ir; + if (!sub_handle) { + /* + * allocate the consecutive block of IRTE's + * for 'nvec' + */ + index = msi_alloc_irte(dev, irq, nvec); + if (index < 0) { + ret = index; + goto error; + } + } else { + iommu = map_dev_to_ir(dev); + if (!iommu) { + ret = -ENOENT; + goto error; + } + /* + * setup the mapping between the irq and the IRTE + * base index, the sub_handle pointing to the + * appropriate interrupt remap table entry. + */ + set_irte_irq(irq, iommu, index, sub_handle); + } +no_ir: +#endif + ret = setup_msi_irq(dev, desc, irq); + if (ret < 0) + goto error; + sub_handle++; + } return 0; + +error: + destroy_irq(irq); + return ret; } void arch_teardown_msi_irq(unsigned int irq) @@ -2333,6 +2872,10 @@ void __init setup_ioapic_dest(void) setup_IO_APIC_irq(ioapic, pin, irq, irq_trigger(irq_entry), irq_polarity(irq_entry)); +#ifdef CONFIG_INTR_REMAP + else if (intr_remapping_enabled) + set_ir_ioapic_affinity_irq(irq, TARGET_CPUS); +#endif else set_ioapic_affinity_irq(irq, TARGET_CPUS); } diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index d66914287ee..9200a1e2752 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -74,6 +74,15 @@ void __init init_ISA_irqs (void) } } +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; + /* Overridden in paravirt.c */ void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); @@ -98,6 +107,46 @@ void __init native_init_IRQ(void) set_intr_gate(vector, interrupt[i]); } +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP) + /* + * IRQ0 must be given a fixed assignment and initialized, + * because it's used before the IO-APIC is set up. + */ + set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]); + + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPI for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); + + /* IPI for generic function call */ + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* IPI for single call function */ + set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt); +#endif + +#ifdef CONFIG_X86_LOCAL_APIC + /* self generated IPI for local APIC timer */ + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); +#endif + +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL) + /* thermal monitor LVT interrupt */ + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +#endif + + if (!acpi_ioapic) + setup_irq(2, &irq2); + /* setup after call gates are initialised (usually add in * the architecture specific gates) */ diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index b3fb430725c..f98f4e1dba0 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -397,7 +397,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) generic_bigsmp_probe(); #endif +#ifdef CONFIG_X86_32 setup_apic_routing(); +#endif if (!num_processors) printk(KERN_ERR "MPTABLE: no processors registered!\n"); return num_processors; diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c index eecc8c18f01..4caff39078e 100644 --- a/arch/x86/kernel/numaq_32.c +++ b/arch/x86/kernel/numaq_32.c @@ -229,6 +229,12 @@ static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, } } +static int __init numaq_setup_ioapic_ids(void) +{ + /* so can skip it */ + return 1; +} + static struct x86_quirks numaq_x86_quirks __initdata = { .arch_pre_time_init = numaq_pre_time_init, .arch_time_init = NULL, @@ -243,6 +249,7 @@ static struct x86_quirks numaq_x86_quirks __initdata = { .mpc_oem_bus_info = mpc_oem_bus_info, .mpc_oem_pci_bus = mpc_oem_pci_bus, .smp_read_mpc_oem = smp_read_mpc_oem, + .setup_ioapic_ids = numaq_setup_ioapic_ids, }; void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem, diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index e2f43768723..6b0bb73998d 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -374,8 +374,6 @@ struct pv_cpu_ops pv_cpu_ops = { struct pv_apic_ops pv_apic_ops = { #ifdef CONFIG_X86_LOCAL_APIC - .apic_write = native_apic_write, - .apic_read = native_apic_read, .setup_boot_clock = setup_boot_APIC_clock, .setup_secondary_clock = setup_secondary_APIC_clock, .startup_ipi_hook = paravirt_nop, diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 141efab5240..46c98efbbf8 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -758,6 +758,8 @@ void __init setup_arch(char **cmdline_p) #else num_physpages = max_pfn; + if (cpu_has_x2apic) + check_x2apic(); /* How many end-of-memory variables you have, grandma! */ /* need this before calling reserve_initrd */ diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 45531e3ba19..2ff0bbcd5bd 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -123,7 +123,6 @@ EXPORT_PER_CPU_SYMBOL(cpu_info); static atomic_t init_deasserted; -static int boot_cpu_logical_apicid; /* representing cpus for which sibling maps can be computed */ static cpumask_t cpu_sibling_setup_map; @@ -165,6 +164,8 @@ static void unmap_cpu_to_node(int cpu) #endif #ifdef CONFIG_X86_32 +static int boot_cpu_logical_apicid; + u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID }; @@ -210,7 +211,7 @@ static void __cpuinit smp_callin(void) /* * (This works even if the APIC is not enabled.) */ - phys_id = GET_APIC_ID(read_apic_id()); + phys_id = read_apic_id(); cpuid = smp_processor_id(); if (cpu_isset(cpuid, cpu_callin_map)) { panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__, @@ -550,8 +551,7 @@ static inline void __inquire_remote_apic(int apicid) printk(KERN_CONT "a previous APIC delivery may have failed\n"); - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); - apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]); + apic_icr_write(APIC_DM_REMRD | regs[i], apicid); timeout = 0; do { @@ -583,11 +583,9 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip) int maxlvt; /* Target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid)); - /* Boot on the stack */ /* Kick the second */ - apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL); + apic_icr_write(APIC_DM_NMI | APIC_DEST_LOGICAL, logical_apicid); pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); @@ -640,13 +638,11 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) /* * Turn INIT on target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* * Send IPI */ - apic_write(APIC_ICR, - APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT); + apic_icr_write(APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT, + phys_apicid); pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); @@ -656,10 +652,8 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) pr_debug("Deasserting INIT.\n"); /* Target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* Send IPI */ - apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); + apic_icr_write(APIC_INT_LEVELTRIG | APIC_DM_INIT, phys_apicid); pr_debug("Waiting for send to finish...\n"); send_status = safe_apic_wait_icr_idle(); @@ -702,11 +696,10 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) */ /* Target chip */ - apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid)); - /* Boot on the stack */ /* Kick the second */ - apic_write(APIC_ICR, APIC_DM_STARTUP | (start_eip >> 12)); + apic_icr_write(APIC_DM_STARTUP | (start_eip >> 12), + phys_apicid); /* * Give the other CPU some time to accept the IPI. @@ -1175,10 +1168,17 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) * Setup boot CPU information */ smp_store_cpu_info(0); /* Final full version of the data */ +#ifdef CONFIG_X86_32 boot_cpu_logical_apicid = logical_smp_processor_id(); +#endif current_thread_info()->cpu = 0; /* needed? */ set_cpu_sibling_map(0); +#ifdef CONFIG_X86_64 + enable_IR_x2apic(); + setup_apic_routing(); +#endif + if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); disable_smp(); @@ -1186,9 +1186,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) } preempt_disable(); - if (GET_APIC_ID(read_apic_id()) != boot_cpu_physical_apicid) { + if (read_apic_id() != boot_cpu_physical_apicid) { panic("Boot APIC ID in local APIC unexpected (%d vs %d)", - GET_APIC_ID(read_apic_id()), boot_cpu_physical_apicid); + read_apic_id(), boot_cpu_physical_apicid); /* Or can we switch back to PIC here? */ } preempt_enable(); diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c index d67ce5f044b..7b987852e87 100644 --- a/arch/x86/kernel/summit_32.c +++ b/arch/x86/kernel/summit_32.c @@ -30,7 +30,7 @@ #include <linux/init.h> #include <asm/io.h> #include <asm/bios_ebda.h> -#include <asm/mach-summit/mach_mpparse.h> +#include <asm/summit/mpparse.h> static struct rio_table_hdr *rio_table_hdr __initdata; static struct scal_detail *scal_devs[MAX_NUMNODES] __initdata; diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 8c9ad02af5a..8b6c393ab9f 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -905,8 +905,8 @@ static inline int __init activate_vmi(void) #endif #ifdef CONFIG_X86_LOCAL_APIC - para_fill(pv_apic_ops.apic_read, APICRead); - para_fill(pv_apic_ops.apic_write, APICWrite); + para_fill(apic_ops->read, APICRead); + para_fill(apic_ops->write, APICWrite); #endif /* diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index d9249a882aa..65f0b8a47be 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -55,6 +55,7 @@ #include <linux/lguest_launcher.h> #include <linux/virtio_console.h> #include <linux/pm.h> +#include <asm/apic.h> #include <asm/lguest.h> #include <asm/paravirt.h> #include <asm/param.h> @@ -783,14 +784,44 @@ static void lguest_wbinvd(void) * code qualifies for Advanced. It will also never interrupt anything. It * does, however, allow us to get through the Linux boot code. */ #ifdef CONFIG_X86_LOCAL_APIC -static void lguest_apic_write(unsigned long reg, u32 v) +static void lguest_apic_write(u32 reg, u32 v) { } -static u32 lguest_apic_read(unsigned long reg) +static u32 lguest_apic_read(u32 reg) { return 0; } + +static u64 lguest_apic_icr_read(void) +{ + return 0; +} + +static void lguest_apic_icr_write(u32 low, u32 id) +{ + /* Warn to see if there's any stray references */ + WARN_ON(1); +} + +static void lguest_apic_wait_icr_idle(void) +{ + return; +} + +static u32 lguest_apic_safe_wait_icr_idle(void) +{ + return 0; +} + +static struct apic_ops lguest_basic_apic_ops = { + .read = lguest_apic_read, + .write = lguest_apic_write, + .icr_read = lguest_apic_icr_read, + .icr_write = lguest_apic_icr_write, + .wait_icr_idle = lguest_apic_wait_icr_idle, + .safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle, +}; #endif /* STOP! Until an interrupt comes in. */ @@ -990,8 +1021,7 @@ __init void lguest_init(void) #ifdef CONFIG_X86_LOCAL_APIC /* apic read/write intercepts */ - pv_apic_ops.apic_write = lguest_apic_write; - pv_apic_ops.apic_read = lguest_apic_read; + apic_ops = &lguest_basic_apic_ops; #endif /* time operations */ diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 3f2cf11f201..37b9ae4d44c 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -38,15 +38,6 @@ void __init pre_intr_init_hook(void) init_ISA_irqs(); } -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; - /** * intr_init_hook - post gate setup interrupt initialisation * @@ -62,12 +53,6 @@ void __init intr_init_hook(void) if (x86_quirks->arch_intr_init()) return; } -#ifdef CONFIG_X86_LOCAL_APIC - apic_intr_init(); -#endif - - if (!acpi_ioapic) - setup_irq(2, &irq2); } /** diff --git a/arch/x86/mach-generic/Makefile b/arch/x86/mach-generic/Makefile index 0dbd7803a1d..4706de7676b 100644 --- a/arch/x86/mach-generic/Makefile +++ b/arch/x86/mach-generic/Makefile @@ -9,4 +9,4 @@ obj-$(CONFIG_X86_NUMAQ) += numaq.o obj-$(CONFIG_X86_SUMMIT) += summit.o obj-$(CONFIG_X86_BIGSMP) += bigsmp.o obj-$(CONFIG_X86_ES7000) += es7000.o -obj-$(CONFIG_X86_ES7000) += ../../x86/mach-es7000/ +obj-$(CONFIG_X86_ES7000) += ../../x86/es7000/ diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c index 59d77171455..df37fc9d6a2 100644 --- a/arch/x86/mach-generic/bigsmp.c +++ b/arch/x86/mach-generic/bigsmp.c @@ -5,18 +5,17 @@ #define APIC_DEFINITION 1 #include <linux/threads.h> #include <linux/cpumask.h> -#include <asm/smp.h> #include <asm/mpspec.h> #include <asm/genapic.h> #include <asm/fixmap.h> #include <asm/apicdef.h> #include <linux/kernel.h> -#include <linux/smp.h> #include <linux/init.h> #include <linux/dmi.h> -#include <asm/mach-bigsmp/mach_apic.h> -#include <asm/mach-bigsmp/mach_apicdef.h> -#include <asm/mach-bigsmp/mach_ipi.h> +#include <asm/bigsmp/apicdef.h> +#include <linux/smp.h> +#include <asm/bigsmp/apic.h> +#include <asm/bigsmp/ipi.h> #include <asm/mach-default/mach_mpparse.h> static int dmi_bigsmp; /* can be set by dmi scanners */ diff --git a/arch/x86/mach-generic/es7000.c b/arch/x86/mach-generic/es7000.c index 4742626f08c..520cca0ee04 100644 --- a/arch/x86/mach-generic/es7000.c +++ b/arch/x86/mach-generic/es7000.c @@ -4,20 +4,19 @@ #define APIC_DEFINITION 1 #include <linux/threads.h> #include <linux/cpumask.h> -#include <asm/smp.h> #include <asm/mpspec.h> #include <asm/genapic.h> #include <asm/fixmap.h> #include <asm/apicdef.h> #include <linux/kernel.h> #include <linux/string.h> -#include <linux/smp.h> #include <linux/init.h> -#include <asm/mach-es7000/mach_apicdef.h> -#include <asm/mach-es7000/mach_apic.h> -#include <asm/mach-es7000/mach_ipi.h> -#include <asm/mach-es7000/mach_mpparse.h> -#include <asm/mach-es7000/mach_wakecpu.h> +#include <asm/es7000/apicdef.h> +#include <linux/smp.h> +#include <asm/es7000/apic.h> +#include <asm/es7000/ipi.h> +#include <asm/es7000/mpparse.h> +#include <asm/es7000/wakecpu.h> static int probe_es7000(void) { diff --git a/arch/x86/mach-generic/numaq.c b/arch/x86/mach-generic/numaq.c index 8091e68764c..8cf58394975 100644 --- a/arch/x86/mach-generic/numaq.c +++ b/arch/x86/mach-generic/numaq.c @@ -4,7 +4,6 @@ #define APIC_DEFINITION 1 #include <linux/threads.h> #include <linux/cpumask.h> -#include <linux/smp.h> #include <asm/mpspec.h> #include <asm/genapic.h> #include <asm/fixmap.h> @@ -12,11 +11,12 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <asm/mach-numaq/mach_apic.h> -#include <asm/mach-numaq/mach_apicdef.h> -#include <asm/mach-numaq/mach_ipi.h> -#include <asm/mach-numaq/mach_mpparse.h> -#include <asm/mach-numaq/mach_wakecpu.h> +#include <asm/numaq/apicdef.h> +#include <linux/smp.h> +#include <asm/numaq/apic.h> +#include <asm/numaq/ipi.h> +#include <asm/numaq/mpparse.h> +#include <asm/numaq/wakecpu.h> #include <asm/numaq.h> static int mps_oem_check(struct mp_config_table *mpc, char *oem, diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c index a97ea0f35b1..6ad6b67a723 100644 --- a/arch/x86/mach-generic/summit.c +++ b/arch/x86/mach-generic/summit.c @@ -4,19 +4,18 @@ #define APIC_DEFINITION 1 #include <linux/threads.h> #include <linux/cpumask.h> -#include <asm/smp.h> #include <asm/mpspec.h> #include <asm/genapic.h> #include <asm/fixmap.h> #include <asm/apicdef.h> #include <linux/kernel.h> #include <linux/string.h> -#include <linux/smp.h> #include <linux/init.h> -#include <asm/mach-summit/mach_apic.h> -#include <asm/mach-summit/mach_apicdef.h> -#include <asm/mach-summit/mach_ipi.h> -#include <asm/mach-summit/mach_mpparse.h> +#include <asm/summit/apicdef.h> +#include <linux/smp.h> +#include <asm/summit/apic.h> +#include <asm/summit/ipi.h> +#include <asm/summit/mpparse.h> static int probe_summit(void) { diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 19af06927fb..1d88d2b3977 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -250,10 +250,5 @@ int __init pci_acpi_init(void) acpi_pci_irq_enable(dev); } -#ifdef CONFIG_X86_IO_APIC - if (acpi_ioapic) - print_IO_APIC(); -#endif - return 0; } diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 7dcd321a050..a27d562a974 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -36,6 +36,7 @@ #include <xen/hvc-console.h> #include <asm/paravirt.h> +#include <asm/apic.h> #include <asm/page.h> #include <asm/xen/hypercall.h> #include <asm/xen/hypervisor.h> @@ -580,16 +581,47 @@ static void xen_io_delay(void) } #ifdef CONFIG_X86_LOCAL_APIC -static u32 xen_apic_read(unsigned long reg) +static u32 xen_apic_read(u32 reg) { return 0; } -static void xen_apic_write(unsigned long reg, u32 val) +static void xen_apic_write(u32 reg, u32 val) { /* Warn to see if there's any stray references */ WARN_ON(1); } + +static u64 xen_apic_icr_read(void) +{ + return 0; +} + +static void xen_apic_icr_write(u32 low, u32 id) +{ + /* Warn to see if there's any stray references */ + WARN_ON(1); +} + +static void xen_apic_wait_icr_idle(void) +{ + return; +} + +static u32 xen_safe_apic_wait_icr_idle(void) +{ + return 0; +} + +static struct apic_ops xen_basic_apic_ops = { + .read = xen_apic_read, + .write = xen_apic_write, + .icr_read = xen_apic_icr_read, + .icr_write = xen_apic_icr_write, + .wait_icr_idle = xen_apic_wait_icr_idle, + .safe_wait_icr_idle = xen_safe_apic_wait_icr_idle, +}; + #endif static void xen_flush_tlb(void) @@ -1273,8 +1305,6 @@ static const struct pv_irq_ops xen_irq_ops __initdata = { static const struct pv_apic_ops xen_apic_ops __initdata = { #ifdef CONFIG_X86_LOCAL_APIC - .apic_write = xen_apic_write, - .apic_read = xen_apic_read, .setup_boot_clock = paravirt_nop, .setup_secondary_clock = paravirt_nop, .startup_ipi_hook = paravirt_nop, @@ -1677,6 +1707,13 @@ asmlinkage void __init xen_start_kernel(void) pv_apic_ops = xen_apic_ops; pv_mmu_ops = xen_mmu_ops; +#ifdef CONFIG_X86_LOCAL_APIC + /* + * set up the basic apic ops. + */ + apic_ops = &xen_basic_apic_ops; +#endif + if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) { pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start; pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit; |