diff options
Diffstat (limited to 'arch/x86/xen/setup.c')
| -rw-r--r-- | arch/x86/xen/setup.c | 172 |
1 files changed, 137 insertions, 35 deletions
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index a4790bf22c5..2e555163c2f 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -17,6 +17,7 @@ #include <asm/e820.h> #include <asm/setup.h> #include <asm/acpi.h> +#include <asm/numa.h> #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> @@ -32,6 +33,9 @@ /* These are code, but not functions. Defined in entry.S */ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; +#ifdef CONFIG_X86_64 +extern asmlinkage void nmi(void); +#endif extern void xen_sysenter_target(void); extern void xen_syscall_target(void); extern void xen_syscall32_target(void); @@ -78,9 +82,16 @@ static void __init xen_add_extra_mem(u64 start, u64 size) memblock_reserve(start, size); xen_max_p2m_pfn = PFN_DOWN(start + size); + for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) { + unsigned long mfn = pfn_to_mfn(pfn); + + if (WARN_ONCE(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn)) + continue; + WARN_ONCE(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n", + pfn, mfn); - for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++) __set_phys_to_machine(pfn, INVALID_P2M_ENTRY); + } } static unsigned long __init xen_do_chunk(unsigned long start, @@ -157,25 +168,24 @@ static unsigned long __init xen_populate_chunk( unsigned long dest_pfn; for (i = 0, entry = list; i < map_size; i++, entry++) { - unsigned long credits = credits_left; unsigned long s_pfn; unsigned long e_pfn; unsigned long pfns; long capacity; - if (credits <= 0) + if (credits_left <= 0) break; if (entry->type != E820_RAM) continue; - e_pfn = PFN_UP(entry->addr + entry->size); + e_pfn = PFN_DOWN(entry->addr + entry->size); /* We only care about E820 after the xen_start_info->nr_pages */ if (e_pfn <= max_pfn) continue; - s_pfn = PFN_DOWN(entry->addr); + s_pfn = PFN_UP(entry->addr); /* If the E820 falls within the nr_pages, we want to start * at the nr_pages PFN. * If that would mean going past the E820 entry, skip it @@ -184,23 +194,19 @@ static unsigned long __init xen_populate_chunk( capacity = e_pfn - max_pfn; dest_pfn = max_pfn; } else { - /* last_pfn MUST be within E820_RAM regions */ - if (*last_pfn && e_pfn >= *last_pfn) - s_pfn = *last_pfn; capacity = e_pfn - s_pfn; dest_pfn = s_pfn; } - /* If we had filled this E820_RAM entry, go to the next one. */ - if (capacity <= 0) - continue; - if (credits > capacity) - credits = capacity; + if (credits_left < capacity) + capacity = credits_left; - pfns = xen_do_chunk(dest_pfn, dest_pfn + credits, false); + pfns = xen_do_chunk(dest_pfn, dest_pfn + capacity, false); done += pfns; - credits_left -= pfns; *last_pfn = (dest_pfn + pfns); + if (pfns < capacity) + break; + credits_left -= pfns; } return done; } @@ -212,13 +218,19 @@ static void __init xen_set_identity_and_release_chunk( unsigned long pfn; /* - * If the PFNs are currently mapped, the VA mapping also needs - * to be updated to be 1:1. + * If the PFNs are currently mapped, clear the mappings + * (except for the ISA region which must be 1:1 mapped) to + * release the refcounts (in Xen) on the original frames. */ - for (pfn = start_pfn; pfn <= max_pfn_mapped && pfn < end_pfn; pfn++) + for (pfn = start_pfn; pfn <= max_pfn_mapped && pfn < end_pfn; pfn++) { + pte_t pte = __pte_ma(0); + + if (pfn < PFN_UP(ISA_END_ADDRESS)) + pte = mfn_pte(pfn, PAGE_KERNEL_IO); + (void)HYPERVISOR_update_va_mapping( - (unsigned long)__va(pfn << PAGE_SHIFT), - mfn_pte(pfn, PAGE_KERNEL_IO), 0); + (unsigned long)__va(pfn << PAGE_SHIFT), pte, 0); + } if (start_pfn < nr_pages) *released += xen_release_chunk( @@ -310,6 +322,17 @@ static void xen_align_and_add_e820_region(u64 start, u64 size, int type) e820_add_region(start, end - start, type); } +void xen_ignore_unusable(struct e820entry *list, size_t map_size) +{ + struct e820entry *entry; + unsigned int i; + + for (i = 0, entry = list; i < map_size; i++, entry++) { + if (entry->type == E820_UNUSABLE) + entry->type = E820_RAM; + } +} + /** * machine_specific_memory_setup - Hook for machine specific memory setup. **/ @@ -350,6 +373,17 @@ char * __init xen_memory_setup(void) } BUG_ON(rc); + /* + * Xen won't allow a 1:1 mapping to be created to UNUSABLE + * regions, so if we're using the machine memory map leave the + * region as RAM as it is in the pseudo-physical map. + * + * UNUSABLE regions in domUs are not handled and will need + * a patch in the future. + */ + if (xen_initial_domain()) + xen_ignore_unusable(map, memmap.nr_entries); + /* Make sure the Xen-supplied memory map is well-ordered. */ sanitize_e820_map(map, memmap.nr_entries, &memmap.nr_entries); @@ -417,6 +451,15 @@ char * __init xen_memory_setup(void) } /* + * Set the rest as identity mapped, in case PCI BARs are + * located here. + * + * PFNs above MAX_P2M_PFN are considered identity mapped as + * well. + */ + set_phys_range_identity(map[i-1].addr / PAGE_SIZE, ~0ul); + + /* * In domU, the ISA region is normal, usable memory, but we * reserve ISA memory anyway because too many things poke * about in there. @@ -429,6 +472,24 @@ char * __init xen_memory_setup(void) * - mfn_list * - xen_start_info * See comment above "struct start_info" in <xen/interface/xen.h> + * We tried to make the the memblock_reserve more selective so + * that it would be clear what region is reserved. Sadly we ran + * in the problem wherein on a 64-bit hypervisor with a 32-bit + * initial domain, the pt_base has the cr3 value which is not + * neccessarily where the pagetable starts! As Jan put it: " + * Actually, the adjustment turns out to be correct: The page + * tables for a 32-on-64 dom0 get allocated in the order "first L1", + * "first L2", "first L3", so the offset to the page table base is + * indeed 2. When reading xen/include/public/xen.h's comment + * very strictly, this is not a violation (since there nothing is said + * that the first thing in the page table space is pointed to by + * pt_base; I admit that this seems to be implied though, namely + * do I think that it is implied that the page table space is the + * range [pt_base, pt_base + nt_pt_frames), whereas that + * range here indeed is [pt_base - 2, pt_base - 2 + nt_pt_frames), + * which - without a priori knowledge - the kernel would have + * difficulty to figure out)." - so lets just fall back to the + * easy way and reserve the whole region. */ memblock_reserve(__pa(xen_start_info->mfn_list), xen_start_info->pt_base - xen_start_info->mfn_list); @@ -439,6 +500,35 @@ char * __init xen_memory_setup(void) } /* + * Machine specific memory setup for auto-translated guests. + */ +char * __init xen_auto_xlated_memory_setup(void) +{ + static struct e820entry map[E820MAX] __initdata; + + struct xen_memory_map memmap; + int i; + int rc; + + memmap.nr_entries = E820MAX; + set_xen_guest_handle(memmap.buffer, map); + + rc = HYPERVISOR_memory_op(XENMEM_memory_map, &memmap); + if (rc < 0) + panic("No memory map (%d)\n", rc); + + sanitize_e820_map(map, ARRAY_SIZE(map), &memmap.nr_entries); + + for (i = 0; i < memmap.nr_entries; i++) + e820_add_region(map[i].addr, map[i].size, map[i].type); + + memblock_reserve(__pa(xen_start_info->mfn_list), + xen_start_info->pt_base - xen_start_info->mfn_list); + + return "Xen"; +} + +/* * Set the bit indicating "nosegneg" library variants should be used. * We only need to bother in pure 32-bit mode; compat 32-bit processes * can have un-truncated segments, so wrapping around is allowed. @@ -446,15 +536,22 @@ char * __init xen_memory_setup(void) static void __init fiddle_vdso(void) { #ifdef CONFIG_X86_32 + /* + * This could be called before selected_vdso32 is initialized, so + * just fiddle with both possible images. vdso_image_32_syscall + * can't be selected, since it only exists on 64-bit systems. + */ u32 *mask; - mask = VDSO32_SYMBOL(&vdso32_int80_start, NOTE_MASK); + mask = vdso_image_32_int80.data + + vdso_image_32_int80.sym_VDSO32_NOTE_MASK; *mask |= 1 << VDSO_NOTE_NONEGSEG_BIT; - mask = VDSO32_SYMBOL(&vdso32_sysenter_start, NOTE_MASK); + mask = vdso_image_32_sysenter.data + + vdso_image_32_sysenter.sym_VDSO32_NOTE_MASK; *mask |= 1 << VDSO_NOTE_NONEGSEG_BIT; #endif } -static int __cpuinit register_callback(unsigned type, const void *func) +static int register_callback(unsigned type, const void *func) { struct callback_register callback = { .type = type, @@ -465,7 +562,7 @@ static int __cpuinit register_callback(unsigned type, const void *func) return HYPERVISOR_callback_op(CALLBACKOP_register, &callback); } -void __cpuinit xen_enable_sysenter(void) +void xen_enable_sysenter(void) { int ret; unsigned sysenter_feature; @@ -484,7 +581,7 @@ void __cpuinit xen_enable_sysenter(void) setup_clear_cpu_cap(sysenter_feature); } -void __cpuinit xen_enable_syscall(void) +void xen_enable_syscall(void) { #ifdef CONFIG_X86_64 int ret; @@ -505,16 +602,13 @@ void __cpuinit xen_enable_syscall(void) #endif /* CONFIG_X86_64 */ } -void __init xen_arch_setup(void) +void __init xen_pvmmu_arch_setup(void) { - xen_panic_handler_init(); - HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments); HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables); - if (!xen_feature(XENFEAT_auto_translated_physmap)) - HYPERVISOR_vm_assist(VMASST_CMD_enable, - VMASST_TYPE_pae_extended_cr3); + HYPERVISOR_vm_assist(VMASST_CMD_enable, + VMASST_TYPE_pae_extended_cr3); if (register_callback(CALLBACKTYPE_event, xen_hypervisor_callback) || register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback)) @@ -522,6 +616,14 @@ void __init xen_arch_setup(void) xen_enable_sysenter(); xen_enable_syscall(); +} + +/* This function is not called for HVM domains */ +void __init xen_arch_setup(void) +{ + xen_panic_handler_init(); + if (!xen_feature(XENFEAT_auto_translated_physmap)) + xen_pvmmu_arch_setup(); #ifdef CONFIG_ACPI if (!(xen_start_info->flags & SIF_INITDOMAIN)) { @@ -535,11 +637,11 @@ void __init xen_arch_setup(void) COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE); /* Set up idle, making sure it calls safe_halt() pvop */ -#ifdef CONFIG_X86_32 - boot_cpu_data.hlt_works_ok = 1; -#endif disable_cpuidle(); disable_cpufreq(); - WARN_ON(set_pm_idle_to_default()); + WARN_ON(xen_set_default_idle()); fiddle_vdso(); +#ifdef CONFIG_NUMA + numa_off = 1; +#endif } |
