diff options
Diffstat (limited to 'arch/x86/platform/ce4100/ce4100.c')
| -rw-r--r-- | arch/x86/platform/ce4100/ce4100.c | 51 |
1 files changed, 47 insertions, 4 deletions
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c index d2c0d51a717..8244f5ec2f4 100644 --- a/arch/x86/platform/ce4100/ce4100.c +++ b/arch/x86/platform/ce4100/ce4100.c @@ -12,24 +12,38 @@ #include <linux/kernel.h> #include <linux/irq.h> #include <linux/module.h> +#include <linux/reboot.h> #include <linux/serial_reg.h> #include <linux/serial_8250.h> +#include <linux/reboot.h> +#include <asm/ce4100.h> +#include <asm/prom.h> #include <asm/setup.h> +#include <asm/i8259.h> #include <asm/io.h> +#include <asm/io_apic.h> +#include <asm/emergency-restart.h> static int ce4100_i8042_detect(void) { return 0; } -static void __init sdv_find_smp_config(void) +/* + * The CE4100 platform has an internal 8051 Microcontroller which is + * responsible for signaling to the external Power Management Unit the + * intention to reset, reboot or power off the system. This 8051 device has + * its command register mapped at I/O port 0xcf9 and the value 0x4 is used + * to power off the system. + */ +static void ce4100_power_off(void) { + outb(0x4, 0xcf9); } #ifdef CONFIG_SERIAL_8250 - static unsigned int mem_serial_in(struct uart_port *p, int offset) { offset = offset << p->regshift; @@ -93,8 +107,11 @@ static void ce4100_serial_fixup(int port, struct uart_port *up, up->membase = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); up->membase += up->mapbase & ~PAGE_MASK; + up->mapbase += port * 0x100; + up->membase += port * 0x100; up->iotype = UPIO_MEM32; up->regshift = 2; + up->irq = 4; } #endif up->iobase = 0; @@ -110,7 +127,7 @@ static __init void sdv_serial_fixup(void) } #else -static inline void sdv_serial_fixup(void); +static inline void sdv_serial_fixup(void) {}; #endif static void __init sdv_arch_setup(void) @@ -118,6 +135,15 @@ static void __init sdv_arch_setup(void) sdv_serial_fixup(); } +#ifdef CONFIG_X86_IO_APIC +static void sdv_pci_init(void) +{ + x86_of_pci_init(); + /* We can't set this earlier, because we need to calibrate the timer */ + legacy_pic = &null_legacy_pic; +} +#endif + /* * CE4100 specific x86_init function overrides and early setup * calls. @@ -128,5 +154,22 @@ void __init x86_ce4100_early_setup(void) x86_platform.i8042_detect = ce4100_i8042_detect; x86_init.resources.probe_roms = x86_init_noop; x86_init.mpparse.get_smp_config = x86_init_uint_noop; - x86_init.mpparse.find_smp_config = sdv_find_smp_config; + x86_init.mpparse.find_smp_config = x86_init_noop; + x86_init.pci.init = ce4100_pci_init; + + /* + * By default, the reboot method is ACPI which is supported by the + * CE4100 bootloader CEFDK using FADT.ResetReg Address and ResetValue + * the bootloader will however issue a system power off instead of + * reboot. By using BOOT_KBD we ensure proper system reboot as + * expected. + */ + reboot_type = BOOT_KBD; + +#ifdef CONFIG_X86_IO_APIC + x86_init.pci.init_irq = sdv_pci_init; + x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc_nocheck; +#endif + + pm_power_off = ce4100_power_off; } |