aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/pci
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/pci')
-rw-r--r--arch/x86/pci/Makefile9
-rw-r--r--arch/x86/pci/acpi.c441
-rw-r--r--arch/x86/pci/amd_bus.c217
-rw-r--r--arch/x86/pci/broadcom_bus.c76
-rw-r--r--arch/x86/pci/bus_numa.c119
-rw-r--r--arch/x86/pci/bus_numa.h21
-rw-r--r--arch/x86/pci/ce4100.c26
-rw-r--r--arch/x86/pci/common.c241
-rw-r--r--arch/x86/pci/direct.c29
-rw-r--r--arch/x86/pci/fixup.c119
-rw-r--r--arch/x86/pci/i386.c320
-rw-r--r--arch/x86/pci/intel_mid_pci.c (renamed from arch/x86/pci/mrst.c)87
-rw-r--r--arch/x86/pci/irq.c23
-rw-r--r--arch/x86/pci/legacy.c14
-rw-r--r--arch/x86/pci/mmconfig-shared.c382
-rw-r--r--arch/x86/pci/mmconfig_32.c31
-rw-r--r--arch/x86/pci/mmconfig_64.c52
-rw-r--r--arch/x86/pci/numachip.c129
-rw-r--r--arch/x86/pci/numaq_32.c165
-rw-r--r--arch/x86/pci/olpc.c6
-rw-r--r--arch/x86/pci/pcbios.c10
-rw-r--r--arch/x86/pci/sta2x11-fixup.c364
-rw-r--r--arch/x86/pci/visws.c92
-rw-r--r--arch/x86/pci/xen.c586
24 files changed, 2277 insertions, 1282 deletions
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index 6b8759f7634..5c6fc3577a4 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -11,15 +11,16 @@ obj-$(CONFIG_X86_INTEL_CE) += ce4100.o
obj-$(CONFIG_ACPI) += acpi.o
obj-y += legacy.o irq.o
-obj-$(CONFIG_X86_VISWS) += visws.o
+obj-$(CONFIG_STA2X11) += sta2x11-fixup.o
-obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
+obj-$(CONFIG_X86_NUMACHIP) += numachip.o
-obj-$(CONFIG_X86_MRST) += mrst.o
+obj-$(CONFIG_X86_INTEL_MID) += intel_mid_pci.o
obj-y += common.o early.o
-obj-y += amd_bus.o bus_numa.o
+obj-y += bus_numa.o
+obj-$(CONFIG_AMD_NB) += amd_bus.o
obj-$(CONFIG_PCI_CNB20LE_QUIRK) += broadcom_bus.o
ifeq ($(CONFIG_PCI_DEBUG),y)
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 0972315c386..5075371ab59 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -9,14 +9,21 @@
struct pci_root_info {
struct acpi_device *bridge;
- char *name;
+ char name[16];
unsigned int res_num;
struct resource *res;
- struct pci_bus *bus;
- int busnum;
+ resource_size_t *res_offset;
+ struct pci_sysdata sd;
+#ifdef CONFIG_PCI_MMCONFIG
+ bool mcfg_added;
+ u16 segment;
+ u8 start_bus;
+ u8 end_bus;
+#endif
};
static bool pci_use_crs = true;
+static bool pci_ignore_seg = false;
static int __init set_use_crs(const struct dmi_system_id *id)
{
@@ -24,7 +31,20 @@ static int __init set_use_crs(const struct dmi_system_id *id)
return 0;
}
-static const struct dmi_system_id pci_use_crs_table[] __initconst = {
+static int __init set_nouse_crs(const struct dmi_system_id *id)
+{
+ pci_use_crs = false;
+ return 0;
+}
+
+static int __init set_ignore_seg(const struct dmi_system_id *id)
+{
+ printk(KERN_INFO "PCI: %s detected: ignoring ACPI _SEG\n", id->ident);
+ pci_ignore_seg = true;
+ return 0;
+}
+
+static const struct dmi_system_id pci_crs_quirks[] __initconst = {
/* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
{
.callback = set_use_crs,
@@ -43,6 +63,60 @@ static const struct dmi_system_id pci_use_crs_table[] __initconst = {
DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
},
},
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */
+ /* 2006 AMD HT/VIA system with two host bridges */
+ {
+ .callback = set_use_crs,
+ .ident = "ASUS M2V-MX SE",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"),
+ DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."),
+ },
+ },
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */
+ {
+ .callback = set_use_crs,
+ .ident = "MSI MS-7253",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+ DMI_MATCH(DMI_BOARD_NAME, "MS-7253"),
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"),
+ },
+ },
+
+ /* Now for the blacklist.. */
+
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
+ {
+ .callback = set_nouse_crs,
+ .ident = "Dell Studio 1557",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"),
+ DMI_MATCH(DMI_BIOS_VERSION, "A09"),
+ },
+ },
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */
+ {
+ .callback = set_nouse_crs,
+ .ident = "Thinkpad SL510",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_BOARD_NAME, "2847DFG"),
+ DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"),
+ },
+ },
+
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=15362 */
+ {
+ .callback = set_ignore_seg,
+ .ident = "HP xw9300",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
+ },
+ },
{}
};
@@ -53,7 +127,7 @@ void __init pci_acpi_crs_quirks(void)
if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008)
pci_use_crs = false;
- dmi_check_system(pci_use_crs_table);
+ dmi_check_system(pci_crs_quirks);
/*
* If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
@@ -70,9 +144,82 @@ void __init pci_acpi_crs_quirks(void)
pci_use_crs ? "nocrs" : "use_crs");
}
-static acpi_status
-resource_to_addr(struct acpi_resource *resource,
- struct acpi_resource_address64 *addr)
+#ifdef CONFIG_PCI_MMCONFIG
+static int check_segment(u16 seg, struct device *dev, char *estr)
+{
+ if (seg) {
+ dev_err(dev,
+ "%s can't access PCI configuration "
+ "space under this host bridge.\n",
+ estr);
+ return -EIO;
+ }
+
+ /*
+ * Failure in adding MMCFG information is not fatal,
+ * just can't access extended configuration space of
+ * devices under this host bridge.
+ */
+ dev_warn(dev,
+ "%s can't access extended PCI configuration "
+ "space under this bridge.\n",
+ estr);
+
+ return 0;
+}
+
+static int setup_mcfg_map(struct pci_root_info *info, u16 seg, u8 start,
+ u8 end, phys_addr_t addr)
+{
+ int result;
+ struct device *dev = &info->bridge->dev;
+
+ info->start_bus = start;
+ info->end_bus = end;
+ info->mcfg_added = false;
+
+ /* return success if MMCFG is not in use */
+ if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg)
+ return 0;
+
+ if (!(pci_probe & PCI_PROBE_MMCONF))
+ return check_segment(seg, dev, "MMCONFIG is disabled,");
+
+ result = pci_mmconfig_insert(dev, seg, start, end, addr);
+ if (result == 0) {
+ /* enable MMCFG if it hasn't been enabled yet */
+ if (raw_pci_ext_ops == NULL)
+ raw_pci_ext_ops = &pci_mmcfg;
+ info->mcfg_added = true;
+ } else if (result != -EEXIST)
+ return check_segment(seg, dev,
+ "fail to add MMCONFIG information,");
+
+ return 0;
+}
+
+static void teardown_mcfg_map(struct pci_root_info *info)
+{
+ if (info->mcfg_added) {
+ pci_mmconfig_delete(info->segment, info->start_bus,
+ info->end_bus);
+ info->mcfg_added = false;
+ }
+}
+#else
+static int setup_mcfg_map(struct pci_root_info *info,
+ u16 seg, u8 start, u8 end,
+ phys_addr_t addr)
+{
+ return 0;
+}
+static void teardown_mcfg_map(struct pci_root_info *info)
+{
+}
+#endif
+
+static acpi_status resource_to_addr(struct acpi_resource *resource,
+ struct acpi_resource_address64 *addr)
{
acpi_status status;
struct acpi_resource_memory24 *memory24;
@@ -117,8 +264,7 @@ resource_to_addr(struct acpi_resource *resource,
return AE_ERROR;
}
-static acpi_status
-count_resource(struct acpi_resource *acpi_res, void *data)
+static acpi_status count_resource(struct acpi_resource *acpi_res, void *data)
{
struct pci_root_info *info = data;
struct acpi_resource_address64 addr;
@@ -130,15 +276,14 @@ count_resource(struct acpi_resource *acpi_res, void *data)
return AE_OK;
}
-static acpi_status
-setup_resource(struct acpi_resource *acpi_res, void *data)
+static acpi_status setup_resource(struct acpi_resource *acpi_res, void *data)
{
struct pci_root_info *info = data;
struct resource *res;
struct acpi_resource_address64 addr;
acpi_status status;
unsigned long flags;
- u64 start, end;
+ u64 start, orig_end, end;
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
@@ -154,41 +299,38 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
return AE_OK;
start = addr.minimum + addr.translation_offset;
- end = addr.maximum + addr.translation_offset;
+ orig_end = end = addr.maximum + addr.translation_offset;
+
+ /* Exclude non-addressable range or non-addressable portion of range */
+ end = min(end, (u64)iomem_resource.end);
+ if (end <= start) {
+ dev_info(&info->bridge->dev,
+ "host bridge window [%#llx-%#llx] "
+ "(ignored, not CPU addressable)\n", start, orig_end);
+ return AE_OK;
+ } else if (orig_end != end) {
+ dev_info(&info->bridge->dev,
+ "host bridge window [%#llx-%#llx] "
+ "([%#llx-%#llx] ignored, not CPU addressable)\n",
+ start, orig_end, end + 1, orig_end);
+ }
res = &info->res[info->res_num];
res->name = info->name;
res->flags = flags;
res->start = start;
res->end = end;
- res->child = NULL;
+ info->res_offset[info->res_num] = addr.translation_offset;
+ info->res_num++;
- if (!pci_use_crs) {
+ if (!pci_use_crs)
dev_printk(KERN_DEBUG, &info->bridge->dev,
"host bridge window %pR (ignored)\n", res);
- return AE_OK;
- }
-
- info->res_num++;
- if (addr.translation_offset)
- dev_info(&info->bridge->dev, "host bridge window %pR "
- "(PCI address [%#llx-%#llx])\n",
- res, res->start - addr.translation_offset,
- res->end - addr.translation_offset);
- else
- dev_info(&info->bridge->dev, "host bridge window %pR\n", res);
return AE_OK;
}
-static bool resource_contains(struct resource *res, resource_size_t point)
-{
- if (res->start <= point && point <= res->end)
- return true;
- return false;
-}
-
-static void coalesce_windows(struct pci_root_info *info, int type)
+static void coalesce_windows(struct pci_root_info *info, unsigned long type)
{
int i, j;
struct resource *res1, *res2;
@@ -208,29 +350,24 @@ static void coalesce_windows(struct pci_root_info *info, int type)
* our resources no longer match the ACPI _CRS, but
* the kernel resource tree doesn't allow overlaps.
*/
- if (resource_contains(res1, res2->start) ||
- resource_contains(res1, res2->end) ||
- resource_contains(res2, res1->start) ||
- resource_contains(res2, res1->end)) {
- res1->start = min(res1->start, res2->start);
- res1->end = max(res1->end, res2->end);
+ if (resource_overlaps(res1, res2)) {
+ res2->start = min(res1->start, res2->start);
+ res2->end = max(res1->end, res2->end);
dev_info(&info->bridge->dev,
"host bridge window expanded to %pR; %pR ignored\n",
- res1, res2);
- res2->flags = 0;
+ res2, res1);
+ res1->flags = 0;
}
}
}
}
-static void add_resources(struct pci_root_info *info)
+static void add_resources(struct pci_root_info *info,
+ struct list_head *resources)
{
int i;
struct resource *res, *root, *conflict;
- if (!pci_use_crs)
- return;
-
coalesce_windows(info, IORESOURCE_MEM);
coalesce_windows(info, IORESOURCE_IO);
@@ -246,66 +383,103 @@ static void add_resources(struct pci_root_info *info)
conflict = insert_resource_conflict(root, res);
if (conflict)
- dev_err(&info->bridge->dev,
- "address space collision: host bridge window %pR "
- "conflicts with %s %pR\n",
- res, conflict->name, conflict);
+ dev_info(&info->bridge->dev,
+ "ignoring host bridge window %pR (conflicts with %s %pR)\n",
+ res, conflict->name, conflict);
else
- pci_bus_add_resource(info->bus, res, 0);
+ pci_add_resource_offset(resources, res,
+ info->res_offset[i]);
}
}
-static void
-get_current_resources(struct acpi_device *device, int busnum,
- int domain, struct pci_bus *bus)
+static void free_pci_root_info_res(struct pci_root_info *info)
+{
+ kfree(info->res);
+ info->res = NULL;
+ kfree(info->res_offset);
+ info->res_offset = NULL;
+ info->res_num = 0;
+}
+
+static void __release_pci_root_info(struct pci_root_info *info)
+{
+ int i;
+ struct resource *res;
+
+ for (i = 0; i < info->res_num; i++) {
+ res = &info->res[i];
+
+ if (!res->parent)
+ continue;
+
+ if (!(res->flags & (IORESOURCE_MEM | IORESOURCE_IO)))
+ continue;
+
+ release_resource(res);
+ }
+
+ free_pci_root_info_res(info);
+
+ teardown_mcfg_map(info);
+
+ kfree(info);
+}
+
+static void release_pci_root_info(struct pci_host_bridge *bridge)
+{
+ struct pci_root_info *info = bridge->release_data;
+
+ __release_pci_root_info(info);
+}
+
+static void probe_pci_root_info(struct pci_root_info *info,
+ struct acpi_device *device,
+ int busnum, int domain)
{
- struct pci_root_info info;
size_t size;
- if (pci_use_crs)
- pci_bus_remove_resources(bus);
+ sprintf(info->name, "PCI Bus %04x:%02x", domain, busnum);
+ info->bridge = device;
- info.bridge = device;
- info.bus = bus;
- info.res_num = 0;
+ info->res_num = 0;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource,
- &info);
- if (!info.res_num)
+ info);
+ if (!info->res_num)
return;
- size = sizeof(*info.res) * info.res_num;
- info.res = kmalloc(size, GFP_KERNEL);
- if (!info.res)
- goto res_alloc_fail;
+ size = sizeof(*info->res) * info->res_num;
+ info->res = kzalloc(size, GFP_KERNEL);
+ if (!info->res) {
+ info->res_num = 0;
+ return;
+ }
- info.name = kasprintf(GFP_KERNEL, "PCI Bus %04x:%02x", domain, busnum);
- if (!info.name)
- goto name_alloc_fail;
+ size = sizeof(*info->res_offset) * info->res_num;
+ info->res_num = 0;
+ info->res_offset = kzalloc(size, GFP_KERNEL);
+ if (!info->res_offset) {
+ kfree(info->res);
+ info->res = NULL;
+ return;
+ }
- info.res_num = 0;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
- &info);
-
- add_resources(&info);
- return;
-
-name_alloc_fail:
- kfree(info.res);
-res_alloc_fail:
- return;
+ info);
}
-struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root)
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
{
struct acpi_device *device = root->device;
+ struct pci_root_info *info;
int domain = root->segment;
int busnum = root->secondary.start;
+ LIST_HEAD(resources);
struct pci_bus *bus;
struct pci_sysdata *sd;
int node;
-#ifdef CONFIG_ACPI_NUMA
- int pxm;
-#endif
+
+ if (pci_ignore_seg)
+ domain = 0;
if (domain && !pci_domains_supported) {
printk(KERN_WARNING "pci_bus %04x:%02x: "
@@ -314,69 +488,92 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root)
return NULL;
}
- node = -1;
-#ifdef CONFIG_ACPI_NUMA
- pxm = acpi_get_pxm(device->handle);
- if (pxm >= 0)
- node = pxm_to_node(pxm);
- if (node != -1)
- set_mp_bus_to_node(busnum, node);
- else
-#endif
- node = get_mp_bus_to_node(busnum);
+ node = acpi_get_node(device->handle);
+ if (node == NUMA_NO_NODE) {
+ node = x86_pci_root_bus_node(busnum);
+ if (node != 0 && node != NUMA_NO_NODE)
+ dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n",
+ node);
+ }
- if (node != -1 && !node_online(node))
- node = -1;
+ if (node != NUMA_NO_NODE && !node_online(node))
+ node = NUMA_NO_NODE;
- /* Allocate per-root-bus (not per bus) arch-specific data.
- * TODO: leak; this memory is never freed.
- * It's arguable whether it's worth the trouble to care.
- */
- sd = kzalloc(sizeof(*sd), GFP_KERNEL);
- if (!sd) {
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
printk(KERN_WARNING "pci_bus %04x:%02x: "
"ignored (out of memory)\n", domain, busnum);
return NULL;
}
+ sd = &info->sd;
sd->domain = domain;
sd->node = node;
- /*
- * Maybe the desired pci bus has been already scanned. In such case
- * it is unnecessary to scan the pci bus with the given domain,busnum.
- */
+ sd->companion = device;
+
bus = pci_find_bus(domain, busnum);
if (bus) {
/*
- * If the desired bus exits, the content of bus->sysdata will
- * be replaced by sd.
+ * If the desired bus has been scanned already, replace
+ * its bus->sysdata.
*/
memcpy(bus->sysdata, sd, sizeof(*sd));
- kfree(sd);
+ kfree(info);
} else {
- bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
+ probe_pci_root_info(info, device, busnum, domain);
+
+ /* insert busn res at first */
+ pci_add_resource(&resources, &root->secondary);
+ /*
+ * _CRS with no apertures is normal, so only fall back to
+ * defaults or native bridge info if we're ignoring _CRS.
+ */
+ if (pci_use_crs)
+ add_resources(info, &resources);
+ else {
+ free_pci_root_info_res(info);
+ x86_pci_root_bus_resources(busnum, &resources);
+ }
+
+ if (!setup_mcfg_map(info, domain, (u8)root->secondary.start,
+ (u8)root->secondary.end, root->mcfg_addr))
+ bus = pci_create_root_bus(NULL, busnum, &pci_root_ops,
+ sd, &resources);
+
if (bus) {
- get_current_resources(device, busnum, domain, bus);
- bus->subordinate = pci_scan_child_bus(bus);
+ pci_scan_child_bus(bus);
+ pci_set_host_bridge_release(
+ to_pci_host_bridge(bus->bridge),
+ release_pci_root_info, info);
+ } else {
+ pci_free_resource_list(&resources);
+ __release_pci_root_info(info);
}
}
- if (!bus)
- kfree(sd);
+ /* After the PCI-E bus has been walked and all devices discovered,
+ * configure any settings of the fabric that might be necessary.
+ */
+ if (bus) {
+ struct pci_bus *child;
+ list_for_each_entry(child, &bus->children, node)
+ pcie_bus_configure_settings(child);
+ }
- if (bus && node != -1) {
-#ifdef CONFIG_ACPI_NUMA
- if (pxm >= 0)
- dev_printk(KERN_DEBUG, &bus->dev,
- "on NUMA node %d (pxm %d)\n", node, pxm);
-#else
+ if (bus && node != NUMA_NO_NODE)
dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
-#endif
- }
return bus;
}
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+ struct pci_sysdata *sd = bridge->bus->sysdata;
+
+ ACPI_COMPANION_SET(&bridge->dev, sd->companion);
+ return 0;
+}
+
int __init pci_acpi_init(void)
{
struct pci_dev *dev = NULL;
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index e27dffbbb1a..c20d2cc7ef6 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -11,65 +11,54 @@
#include "bus_numa.h"
-/*
- * This discovers the pcibus <-> node mapping on AMD K8.
- * also get peer root bus resource for io,mmio
- */
+#define AMD_NB_F0_NODE_ID 0x60
+#define AMD_NB_F0_UNIT_ID 0x64
+#define AMD_NB_F1_CONFIG_MAP_REG 0xe0
+
+#define RANGE_NUM 16
+#define AMD_NB_F1_CONFIG_MAP_RANGES 4
-struct pci_hostbridge_probe {
+struct amd_hostbridge {
u32 bus;
u32 slot;
- u32 vendor;
u32 device;
};
-static struct pci_hostbridge_probe pci_probes[] __initdata = {
- { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 },
- { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
- { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 },
- { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 },
+/*
+ * IMPORTANT NOTE:
+ * hb_probes[] and early_root_info_init() is in maintenance mode.
+ * It only supports K8, Fam10h, Fam11h, and Fam15h_00h-0fh .
+ * Future processor will rely on information in ACPI.
+ */
+static struct amd_hostbridge hb_probes[] __initdata = {
+ { 0, 0x18, 0x1100 }, /* K8 */
+ { 0, 0x18, 0x1200 }, /* Family10h */
+ { 0xff, 0, 0x1200 }, /* Family10h */
+ { 0, 0x18, 0x1300 }, /* Family11h */
+ { 0, 0x18, 0x1600 }, /* Family15h */
};
-static u64 __initdata fam10h_mmconf_start;
-static u64 __initdata fam10h_mmconf_end;
-static void __init get_pci_mmcfg_amd_fam10h_range(void)
+static struct pci_root_info __init *find_pci_root_info(int node, int link)
{
- u32 address;
- u64 base, msr;
- unsigned segn_busn_bits;
-
- /* assume all cpus from fam10h have mmconf */
- if (boot_cpu_data.x86 < 0x10)
- return;
-
- address = MSR_FAM10H_MMIO_CONF_BASE;
- rdmsrl(address, msr);
-
- /* mmconfig is not enable */
- if (!(msr & FAM10H_MMIO_CONF_ENABLE))
- return;
-
- base = msr & (FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT);
+ struct pci_root_info *info;
- segn_busn_bits = (msr >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) &
- FAM10H_MMIO_CONF_BUSRANGE_MASK;
+ /* find the position */
+ list_for_each_entry(info, &pci_root_infos, list)
+ if (info->node == node && info->link == link)
+ return info;
- fam10h_mmconf_start = base;
- fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1;
+ return NULL;
}
-#define RANGE_NUM 16
-
/**
- * early_fill_mp_bus_to_node()
+ * early_root_info_init()
* called before pcibios_scan_root and pci_scan_bus
- * fills the mp_bus_to_cpumask array based according to the LDT Bus Number
- * Registers found in the K8 northbridge
+ * fills the mp_bus_to_cpumask array based according
+ * to the LDT Bus Number Registers found in the northbridge.
*/
-static int __init early_fill_mp_bus_info(void)
+static int __init early_root_info_init(void)
{
int i;
- int j;
unsigned bus;
unsigned slot;
int node;
@@ -78,31 +67,35 @@ static int __init early_fill_mp_bus_info(void)
int def_link;
struct pci_root_info *info;
u32 reg;
- struct resource *res;
u64 start;
u64 end;
struct range range[RANGE_NUM];
u64 val;
u32 address;
bool found;
+ struct resource fam10h_mmconf_res, *fam10h_mmconf;
+ u64 fam10h_mmconf_start;
+ u64 fam10h_mmconf_end;
if (!early_pci_allowed())
return -1;
found = false;
- for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
+ for (i = 0; i < ARRAY_SIZE(hb_probes); i++) {
u32 id;
u16 device;
u16 vendor;
- bus = pci_probes[i].bus;
- slot = pci_probes[i].slot;
+ bus = hb_probes[i].bus;
+ slot = hb_probes[i].slot;
id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
-
vendor = id & 0xffff;
device = (id>>16) & 0xffff;
- if (pci_probes[i].vendor == vendor &&
- pci_probes[i].device == device) {
+
+ if (vendor != PCI_VENDOR_ID_AMD)
+ continue;
+
+ if (hb_probes[i].device == device) {
found = true;
break;
}
@@ -111,11 +104,16 @@ static int __init early_fill_mp_bus_info(void)
if (!found)
return 0;
- pci_root_num = 0;
- for (i = 0; i < 4; i++) {
+ /*
+ * We should learn topology and routing information from _PXM and
+ * _CRS methods in the ACPI namespace. We extract node numbers
+ * here to work around BIOSes that don't supply _PXM.
+ */
+ for (i = 0; i < AMD_NB_F1_CONFIG_MAP_RANGES; i++) {
int min_bus;
int max_bus;
- reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2));
+ reg = read_pci_config(bus, slot, 1,
+ AMD_NB_F1_CONFIG_MAP_REG + (i << 2));
/* Check if that register is enabled for bus range */
if ((reg & 7) != 3)
@@ -124,25 +122,26 @@ static int __init early_fill_mp_bus_info(void)
min_bus = (reg >> 16) & 0xff;
max_bus = (reg >> 24) & 0xff;
node = (reg >> 4) & 0x07;
-#ifdef CONFIG_NUMA
- for (j = min_bus; j <= max_bus; j++)
- set_mp_bus_to_node(j, node);
-#endif
link = (reg >> 8) & 0x03;
- info = &pci_root_info[pci_root_num];
- info->bus_min = min_bus;
- info->bus_max = max_bus;
- info->node = node;
- info->link = link;
- sprintf(info->name, "PCI Bus #%02x", min_bus);
- pci_root_num++;
+ info = alloc_pci_root_info(min_bus, max_bus, node, link);
}
+ /*
+ * The following code extracts routing information for use on old
+ * systems where Linux doesn't automatically use host bridge _CRS
+ * methods (or when the user specifies "pci=nocrs").
+ *
+ * We only do this through Fam11h, because _CRS should be enough on
+ * newer systems.
+ */
+ if (boot_cpu_data.x86 > 0x11)
+ return 0;
+
/* get the default node and link for left over res */
- reg = read_pci_config(bus, slot, 0, 0x60);
+ reg = read_pci_config(bus, slot, 0, AMD_NB_F0_NODE_ID);
def_node = (reg >> 8) & 0x07;
- reg = read_pci_config(bus, slot, 0, 0x64);
+ reg = read_pci_config(bus, slot, 0, AMD_NB_F0_UNIT_ID);
def_link = (reg >> 8) & 0x03;
memset(range, 0, sizeof(range));
@@ -159,16 +158,10 @@ static int __init early_fill_mp_bus_info(void)
link = (reg >> 4) & 0x03;
end = (reg & 0xfff000) | 0xfff;
- /* find the position */
- for (j = 0; j < pci_root_num; j++) {
- info = &pci_root_info[j];
- if (info->node == node && info->link == link)
- break;
- }
- if (j == pci_root_num)
+ info = find_pci_root_info(node, link);
+ if (!info)
continue; /* not found */
- info = &pci_root_info[j];
printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n",
node, link, start, end);
@@ -180,13 +173,8 @@ static int __init early_fill_mp_bus_info(void)
}
/* add left over io port range to def node/link, [0, 0xffff] */
/* find the position */
- for (j = 0; j < pci_root_num; j++) {
- info = &pci_root_info[j];
- if (info->node == def_node && info->link == def_link)
- break;
- }
- if (j < pci_root_num) {
- info = &pci_root_info[j];
+ info = find_pci_root_info(def_node, def_link);
+ if (info) {
for (i = 0; i < RANGE_NUM; i++) {
if (!range[i].end)
continue;
@@ -211,12 +199,17 @@ static int __init early_fill_mp_bus_info(void)
subtract_range(range, RANGE_NUM, 0, end);
/* get mmconfig */
- get_pci_mmcfg_amd_fam10h_range();
+ fam10h_mmconf = amd_get_mmconfig_range(&fam10h_mmconf_res);
/* need to take out mmconf range */
- if (fam10h_mmconf_end) {
- printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end);
+ if (fam10h_mmconf) {
+ printk(KERN_DEBUG "Fam 10h mmconf %pR\n", fam10h_mmconf);
+ fam10h_mmconf_start = fam10h_mmconf->start;
+ fam10h_mmconf_end = fam10h_mmconf->end;
subtract_range(range, RANGE_NUM, fam10h_mmconf_start,
fam10h_mmconf_end + 1);
+ } else {
+ fam10h_mmconf_start = 0;
+ fam10h_mmconf_end = 0;
}
/* mmio resource */
@@ -234,16 +227,10 @@ static int __init early_fill_mp_bus_info(void)
end <<= 8;
end |= 0xffff;
- /* find the position */
- for (j = 0; j < pci_root_num; j++) {
- info = &pci_root_info[j];
- if (info->node == node && info->link == link)
- break;
- }
- if (j == pci_root_num)
- continue; /* not found */
+ info = find_pci_root_info(node, link);
- info = &pci_root_info[j];
+ if (!info)
+ continue;
printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]",
node, link, start, end);
@@ -311,14 +298,8 @@ static int __init early_fill_mp_bus_info(void)
* add left over mmio range to def node/link ?
* that is tricky, just record range in from start_min to 4G
*/
- for (j = 0; j < pci_root_num; j++) {
- info = &pci_root_info[j];
- if (info->node == def_node && info->link == def_link)
- break;
- }
- if (j < pci_root_num) {
- info = &pci_root_info[j];
-
+ info = find_pci_root_info(def_node, def_link);
+ if (info) {
for (i = 0; i < RANGE_NUM; i++) {
if (!range[i].end)
continue;
@@ -329,20 +310,16 @@ static int __init early_fill_mp_bus_info(void)
}
}
- for (i = 0; i < pci_root_num; i++) {
- int res_num;
+ list_for_each_entry(info, &pci_root_infos, list) {
int busnum;
-
- info = &pci_root_info[i];
- res_num = info->res_num;
- busnum = info->bus_min;
- printk(KERN_DEBUG "bus: [%02x, %02x] on node %x link %x\n",
- info->bus_min, info->bus_max, info->node, info->link);
- for (j = 0; j < res_num; j++) {
- res = &info->res[j];
- printk(KERN_DEBUG "bus: %02x index %x %pR\n",
- busnum, j, res);
- }
+ struct pci_root_res *root_res;
+
+ busnum = info->busn.start;
+ printk(KERN_DEBUG "bus: %pR on node %x link %x\n",
+ &info->busn, info->node, info->link);
+ list_for_each_entry(root_res, &info->resources, list)
+ printk(KERN_DEBUG "bus: %02x %pR\n",
+ busnum, &root_res->res);
}
return 0;
@@ -360,8 +337,8 @@ static void enable_pci_io_ecs(void *unused)
}
}
-static int __cpuinit amd_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
+static int amd_cpu_notify(struct notifier_block *self, unsigned long action,
+ void *hcpu)
{
int cpu = (long)hcpu;
switch (action) {
@@ -375,7 +352,7 @@ static int __cpuinit amd_cpu_notify(struct notifier_block *self,
return NOTIFY_OK;
}
-static struct notifier_block __cpuinitdata amd_cpu_notifier = {
+static struct notifier_block amd_cpu_notifier = {
.notifier_call = amd_cpu_notify,
};
@@ -403,7 +380,6 @@ static void __init pci_enable_pci_io_ecs(void)
++n;
}
}
- pr_info("Extended Config Space enabled on %u nodes\n", n);
#endif
}
@@ -412,17 +388,20 @@ static int __init pci_io_ecs_init(void)
int cpu;
/* assume all cpus from fam10h have IO ECS */
- if (boot_cpu_data.x86 < 0x10)
+ if (boot_cpu_data.x86 < 0x10)
return 0;
/* Try the PCI method first. */
if (early_pci_allowed())
pci_enable_pci_io_ecs();
- register_cpu_notifier(&amd_cpu_notifier);
+ cpu_notifier_register_begin();
for_each_online_cpu(cpu)
amd_cpu_notify(&amd_cpu_notifier, (unsigned long)CPU_ONLINE,
(void *)(long)cpu);
+ __register_cpu_notifier(&amd_cpu_notifier);
+ cpu_notifier_register_done();
+
pci_probe |= PCI_HAS_IO_ECS;
return 0;
@@ -433,7 +412,7 @@ static int __init amd_postcore_init(void)
if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
return 0;
- early_fill_mp_bus_info();
+ early_root_info_init();
pci_io_ecs_init();
return 0;
diff --git a/arch/x86/pci/broadcom_bus.c b/arch/x86/pci/broadcom_bus.c
index ab8269b0da2..bb461cfd01a 100644
--- a/arch/x86/pci/broadcom_bus.c
+++ b/arch/x86/pci/broadcom_bus.c
@@ -15,34 +15,22 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/pci_x86.h>
+#include <asm/pci-direct.h>
#include "bus_numa.h"
-static void __devinit cnb20le_res(struct pci_dev *dev)
+static void __init cnb20le_res(u8 bus, u8 slot, u8 func)
{
struct pci_root_info *info;
+ struct pci_root_res *root_res;
struct resource res;
u16 word1, word2;
u8 fbus, lbus;
- int i;
-
-#ifdef CONFIG_ACPI
- /*
- * We should get host bridge information from ACPI unless the BIOS
- * doesn't support it.
- */
- if (acpi_os_get_root_pointer())
- return;
-#endif
-
- info = &pci_root_info[pci_root_num];
- pci_root_num++;
/* read the PCI bus numbers */
- pci_read_config_byte(dev, 0x44, &fbus);
- pci_read_config_byte(dev, 0x45, &lbus);
- info->bus_min = fbus;
- info->bus_max = lbus;
+ fbus = read_pci_config_byte(bus, slot, func, 0x44);
+ lbus = read_pci_config_byte(bus, slot, func, 0x45);
+ info = alloc_pci_root_info(fbus, lbus, 0, 0);
/*
* Add the legacy IDE ports on bus 0
@@ -59,8 +47,8 @@ static void __devinit cnb20le_res(struct pci_dev *dev)
}
/* read the non-prefetchable memory window */
- pci_read_config_word(dev, 0xc0, &word1);
- pci_read_config_word(dev, 0xc2, &word2);
+ word1 = read_pci_config_16(bus, slot, func, 0xc0);
+ word2 = read_pci_config_16(bus, slot, func, 0xc2);
if (word1 != word2) {
res.start = (word1 << 16) | 0x0000;
res.end = (word2 << 16) | 0xffff;
@@ -69,18 +57,18 @@ static void __devinit cnb20le_res(struct pci_dev *dev)
}
/* read the prefetchable memory window */
- pci_read_config_word(dev, 0xc4, &word1);
- pci_read_config_word(dev, 0xc6, &word2);
+ word1 = read_pci_config_16(bus, slot, func, 0xc4);
+ word2 = read_pci_config_16(bus, slot, func, 0xc6);
if (word1 != word2) {
- res.start = (word1 << 16) | 0x0000;
- res.end = (word2 << 16) | 0xffff;
+ res.start = ((resource_size_t) word1 << 16) | 0x0000;
+ res.end = ((resource_size_t) word2 << 16) | 0xffff;
res.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
update_res(info, res.start, res.end, res.flags, 0);
}
/* read the IO port window */
- pci_read_config_word(dev, 0xd0, &word1);
- pci_read_config_word(dev, 0xd2, &word2);
+ word1 = read_pci_config_16(bus, slot, func, 0xd0);
+ word2 = read_pci_config_16(bus, slot, func, 0xd2);
if (word1 != word2) {
res.start = word1;
res.end = word2;
@@ -92,13 +80,37 @@ static void __devinit cnb20le_res(struct pci_dev *dev)
res.start = fbus;
res.end = lbus;
res.flags = IORESOURCE_BUS;
- dev_info(&dev->dev, "CNB20LE PCI Host Bridge (domain %04x %pR)\n",
- pci_domain_nr(dev->bus), &res);
+ printk(KERN_INFO "CNB20LE PCI Host Bridge (domain 0000 %pR)\n", &res);
- for (i = 0; i < info->res_num; i++)
- dev_info(&dev->dev, "host bridge window %pR\n", &info->res[i]);
+ list_for_each_entry(root_res, &info->resources, list)
+ printk(KERN_INFO "host bridge window %pR\n", &root_res->res);
}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
- cnb20le_res);
+static int __init broadcom_postcore_init(void)
+{
+ u8 bus = 0, slot = 0;
+ u32 id;
+ u16 vendor, device;
+
+#ifdef CONFIG_ACPI
+ /*
+ * We should get host bridge information from ACPI unless the BIOS
+ * doesn't support it.
+ */
+ if (acpi_os_get_root_pointer())
+ return 0;
+#endif
+
+ id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
+ vendor = id & 0xffff;
+ device = (id >> 16) & 0xffff;
+
+ if (vendor == PCI_VENDOR_ID_SERVERWORKS &&
+ device == PCI_DEVICE_ID_SERVERWORKS_LE) {
+ cnb20le_res(bus, slot, 0);
+ cnb20le_res(bus, slot, 1);
+ }
+ return 0;
+}
+postcore_initcall(broadcom_postcore_init);
diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c
index 64a12288389..f3a2cfc1412 100644
--- a/arch/x86/pci/bus_numa.c
+++ b/arch/x86/pci/bus_numa.c
@@ -4,55 +4,107 @@
#include "bus_numa.h"
-int pci_root_num;
-struct pci_root_info pci_root_info[PCI_ROOT_NR];
+LIST_HEAD(pci_root_infos);
-void x86_pci_root_bus_res_quirks(struct pci_bus *b)
+static struct pci_root_info *x86_find_pci_root_info(int bus)
{
- int i;
- int j;
struct pci_root_info *info;
- /* don't go for it if _CRS is used already */
- if (b->resource[0] != &ioport_resource ||
- b->resource[1] != &iomem_resource)
- return;
+ list_for_each_entry(info, &pci_root_infos, list)
+ if (info->busn.start == bus)
+ return info;
- if (!pci_root_num)
- return;
+ return NULL;
+}
- for (i = 0; i < pci_root_num; i++) {
- if (pci_root_info[i].bus_min == b->number)
- break;
- }
+int x86_pci_root_bus_node(int bus)
+{
+ struct pci_root_info *info = x86_find_pci_root_info(bus);
- if (i == pci_root_num)
- return;
+ if (!info)
+ return NUMA_NO_NODE;
+
+ return info->node;
+}
+
+void x86_pci_root_bus_resources(int bus, struct list_head *resources)
+{
+ struct pci_root_info *info = x86_find_pci_root_info(bus);
+ struct pci_root_res *root_res;
+ struct pci_host_bridge_window *window;
+ bool found = false;
+
+ if (!info)
+ goto default_resources;
+
+ printk(KERN_DEBUG "PCI: root bus %02x: hardware-probed resources\n",
+ bus);
- printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n",
- b->number);
+ /* already added by acpi ? */
+ list_for_each_entry(window, resources, list)
+ if (window->res->flags & IORESOURCE_BUS) {
+ found = true;
+ break;
+ }
+
+ if (!found)
+ pci_add_resource(resources, &info->busn);
- pci_bus_remove_resources(b);
- info = &pci_root_info[i];
- for (j = 0; j < info->res_num; j++) {
+ list_for_each_entry(root_res, &info->resources, list) {
struct resource *res;
struct resource *root;
- res = &info->res[j];
- pci_bus_add_resource(b, res, 0);
+ res = &root_res->res;
+ pci_add_resource(resources, res);
if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
else
root = &iomem_resource;
insert_resource(root, res);
}
+ return;
+
+default_resources:
+ /*
+ * We don't have any host bridge aperture information from the
+ * "native host bridge drivers," e.g., amd_bus or broadcom_bus,
+ * so fall back to the defaults historically used by pci_create_bus().
+ */
+ printk(KERN_DEBUG "PCI: root bus %02x: using default resources\n", bus);
+ pci_add_resource(resources, &ioport_resource);
+ pci_add_resource(resources, &iomem_resource);
}
-void __devinit update_res(struct pci_root_info *info, resource_size_t start,
- resource_size_t end, unsigned long flags, int merge)
+struct pci_root_info __init *alloc_pci_root_info(int bus_min, int bus_max,
+ int node, int link)
+{
+ struct pci_root_info *info;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+
+ if (!info)
+ return info;
+
+ sprintf(info->name, "PCI Bus #%02x", bus_min);
+
+ INIT_LIST_HEAD(&info->resources);
+ info->busn.name = info->name;
+ info->busn.start = bus_min;
+ info->busn.end = bus_max;
+ info->busn.flags = IORESOURCE_BUS;
+ info->node = node;
+ info->link = link;
+
+ list_add_tail(&info->list, &pci_root_infos);
+
+ return info;
+}
+
+void update_res(struct pci_root_info *info, resource_size_t start,
+ resource_size_t end, unsigned long flags, int merge)
{
- int i;
struct resource *res;
+ struct pci_root_res *root_res;
if (start > end)
return;
@@ -64,11 +116,11 @@ void __devinit update_res(struct pci_root_info *info, resource_size_t start,
goto addit;
/* try to merge it with old one */
- for (i = 0; i < info->res_num; i++) {
+ list_for_each_entry(root_res, &info->resources, list) {
resource_size_t final_start, final_end;
resource_size_t common_start, common_end;
- res = &info->res[i];
+ res = &root_res->res;
if (res->flags != flags)
continue;
@@ -88,14 +140,15 @@ void __devinit update_res(struct pci_root_info *info, resource_size_t start,
addit:
/* need to add that */
- if (info->res_num >= RES_NUM)
+ root_res = kzalloc(sizeof(*root_res), GFP_KERNEL);
+ if (!root_res)
return;
- res = &info->res[info->res_num];
+ res = &root_res->res;
res->name = info->name;
res->flags = flags;
res->start = start;
res->end = end;
- res->child = NULL;
- info->res_num++;
+
+ list_add_tail(&root_res->list, &info->resources);
}
diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h
index 804a4b40c31..ff8f65b0457 100644
--- a/arch/x86/pci/bus_numa.h
+++ b/arch/x86/pci/bus_numa.h
@@ -4,22 +4,23 @@
* sub bus (transparent) will use entres from 3 to store extra from
* root, so need to make sure we have enough slot there.
*/
-#define RES_NUM 16
+struct pci_root_res {
+ struct list_head list;
+ struct resource res;
+};
+
struct pci_root_info {
+ struct list_head list;
char name[12];
- unsigned int res_num;
- struct resource res[RES_NUM];
- int bus_min;
- int bus_max;
+ struct list_head resources;
+ struct resource busn;
int node;
int link;
};
-/* 4 at this time, it may become to 32 */
-#define PCI_ROOT_NR 4
-extern int pci_root_num;
-extern struct pci_root_info pci_root_info[PCI_ROOT_NR];
-
+extern struct list_head pci_root_infos;
+struct pci_root_info *alloc_pci_root_info(int bus_min, int bus_max,
+ int node, int link);
extern void update_res(struct pci_root_info *info, resource_size_t start,
resource_size_t end, unsigned long flags, int merge);
#endif
diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c
index 85b68ef5e80..b914e20b5a0 100644
--- a/arch/x86/pci/ce4100.c
+++ b/arch/x86/pci/ce4100.c
@@ -34,6 +34,7 @@
#include <linux/pci.h>
#include <linux/init.h>
+#include <asm/ce4100.h>
#include <asm/pci_x86.h>
struct sim_reg {
@@ -114,6 +115,16 @@ static void sata_revid_read(struct sim_dev_reg *reg, u32 *value)
reg_read(reg, value);
}
+static void reg_noirq_read(struct sim_dev_reg *reg, u32 *value)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&pci_config_lock, flags);
+ /* force interrupt pin value to 0 */
+ *value = reg->sim_reg.value & 0xfff00ff;
+ raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
+
static struct sim_dev_reg bus1_fixups[] = {
DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write)
DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write)
@@ -143,6 +154,7 @@ static struct sim_dev_reg bus1_fixups[] = {
DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write)
DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write)
DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(11, 7, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write)
DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write)
@@ -160,8 +172,10 @@ static struct sim_dev_reg bus1_fixups[] = {
DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write)
DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write)
+ DEFINE_REG(16, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write)
+ DEFINE_REG(18, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
};
static void __init init_sim_regs(void)
@@ -254,8 +268,9 @@ int bridge_read(unsigned int devfn, int reg, int len, u32 *value)
static int ce4100_conf_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value)
{
- int i, retval = 1;
+ int i;
+ WARN_ON(seg);
if (bus == 1) {
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
if (bus1_fixups[i].dev_func == devfn &&
@@ -281,6 +296,7 @@ static int ce4100_conf_write(unsigned int seg, unsigned int bus,
{
int i;
+ WARN_ON(seg);
if (bus == 1) {
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
if (bus1_fixups[i].dev_func == devfn &&
@@ -301,15 +317,15 @@ static int ce4100_conf_write(unsigned int seg, unsigned int bus,
return pci_direct_conf1.write(seg, bus, devfn, reg, len, value);
}
-struct pci_raw_ops ce4100_pci_conf = {
+static const struct pci_raw_ops ce4100_pci_conf = {
.read = ce4100_conf_read,
.write = ce4100_conf_write,
};
-static int __init ce4100_pci_init(void)
+int __init ce4100_pci_init(void)
{
init_sim_regs();
raw_pci_ops = &ce4100_pci_conf;
- return 0;
+ /* Indicate caller that it should invoke pci_legacy_init() */
+ return 1;
}
-subsys_initcall(ce4100_pci_init);
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 5fe75026ecc..059a76c2973 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -6,16 +6,19 @@
#include <linux/sched.h>
#include <linux/pci.h>
+#include <linux/pci-acpi.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dmi.h>
#include <linux/slab.h>
+#include <asm-generic/pci-bridge.h>
#include <asm/acpi.h>
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/pci_x86.h>
+#include <asm/setup.h>
unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
PCI_PROBE_MMCONF;
@@ -32,9 +35,8 @@ int noioapicreroute = 1;
#endif
int pcibios_last_bus = -1;
unsigned long pirq_table_addr;
-struct pci_bus *pci_root_bus;
-struct pci_raw_ops *raw_pci_ops;
-struct pci_raw_ops *raw_pci_ext_ops;
+const struct pci_raw_ops *__read_mostly raw_pci_ops;
+const struct pci_raw_ops *__read_mostly raw_pci_ext_ops;
int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 *val)
@@ -79,14 +81,14 @@ struct pci_ops pci_root_ops = {
*/
DEFINE_RAW_SPINLOCK(pci_config_lock);
-static int __devinit can_skip_ioresource_align(const struct dmi_system_id *d)
+static int can_skip_ioresource_align(const struct dmi_system_id *d)
{
pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
return 0;
}
-static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __devinitconst = {
+static const struct dmi_system_id can_skip_pciprobe_dmi_table[] = {
/*
* Systems where PCI IO resource ISA alignment can be skipped
* when the ISA enable bit in the bridge control is not set
@@ -123,7 +125,7 @@ void __init dmi_check_skip_isa_align(void)
dmi_check_system(can_skip_pciprobe_dmi_table);
}
-static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+static void pcibios_fixup_device_resources(struct pci_dev *dev)
{
struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
struct resource *bar_r;
@@ -160,24 +162,31 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
* are examined.
*/
-void __devinit pcibios_fixup_bus(struct pci_bus *b)
+void pcibios_fixup_bus(struct pci_bus *b)
{
struct pci_dev *dev;
- /* root bus? */
- if (!b->parent)
- x86_pci_root_bus_res_quirks(b);
pci_read_bridge_bases(b);
list_for_each_entry(dev, &b->devices, bus_list)
pcibios_fixup_device_resources(dev);
}
+void pcibios_add_bus(struct pci_bus *bus)
+{
+ acpi_pci_add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+ acpi_pci_remove_bus(bus);
+}
+
/*
* Only use DMI information to set this if nothing was passed
* on the kernel command line (which was parsed earlier).
*/
-static int __devinit set_bf_sort(const struct dmi_system_id *d)
+static int set_bf_sort(const struct dmi_system_id *d)
{
if (pci_bf_sort == pci_bf_sort_default) {
pci_bf_sort = pci_dmi_bf;
@@ -186,7 +195,7 @@ static int __devinit set_bf_sort(const struct dmi_system_id *d)
return 0;
}
-static void __devinit read_dmi_type_b1(const struct dmi_header *dm,
+static void read_dmi_type_b1(const struct dmi_header *dm,
void *private_data)
{
u8 *d = (u8 *)dm + 4;
@@ -208,7 +217,7 @@ static void __devinit read_dmi_type_b1(const struct dmi_header *dm,
}
}
-static int __devinit find_sort_method(const struct dmi_system_id *d)
+static int find_sort_method(const struct dmi_system_id *d)
{
dmi_walk(read_dmi_type_b1, NULL);
@@ -223,7 +232,7 @@ static int __devinit find_sort_method(const struct dmi_system_id *d)
* Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
*/
#ifdef __i386__
-static int __devinit assign_all_busses(const struct dmi_system_id *d)
+static int assign_all_busses(const struct dmi_system_id *d)
{
pci_probe |= PCI_ASSIGN_ALL_BUSSES;
printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
@@ -232,7 +241,15 @@ static int __devinit assign_all_busses(const struct dmi_system_id *d)
}
#endif
-static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
+static int set_scan_all(const struct dmi_system_id *d)
+{
+ printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n",
+ d->ident);
+ pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
+ return 0;
+}
+
+static const struct dmi_system_id pciprobe_dmi_table[] = {
#ifdef __i386__
/*
* Laptops which need pci=assign-busses to see Cardbus cards
@@ -247,13 +264,6 @@ static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
},
#endif /* __i386__ */
{
- .callback = find_sort_method,
- .ident = "Dell System",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
- },
- },
- {
.callback = set_bf_sort,
.ident = "Dell PowerEdge 1950",
.matches = {
@@ -294,6 +304,13 @@ static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
},
},
{
+ .callback = find_sort_method,
+ .ident = "Dell System",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+ },
+ },
+ {
.callback = set_bf_sort,
.ident = "HP ProLiant BL20p G3",
.matches = {
@@ -423,6 +440,14 @@ static const struct dmi_system_id __devinitconst pciprobe_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
},
},
+ {
+ .callback = set_scan_all,
+ .ident = "Stratus/NEC ftServer",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Stratus"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"),
+ },
+ },
{}
};
@@ -431,37 +456,27 @@ void __init dmi_check_pciprobe(void)
dmi_check_system(pciprobe_dmi_table);
}
-struct pci_bus * __devinit pcibios_scan_root(int busnum)
+void pcibios_scan_root(int busnum)
{
- struct pci_bus *bus = NULL;
+ struct pci_bus *bus;
struct pci_sysdata *sd;
+ LIST_HEAD(resources);
- while ((bus = pci_find_next_bus(bus)) != NULL) {
- if (bus->number == busnum) {
- /* Already scanned */
- return bus;
- }
- }
-
- /* Allocate per-root-bus (not per bus) arch-specific data.
- * TODO: leak; this memory is never freed.
- * It's arguable whether it's worth the trouble to care.
- */
sd = kzalloc(sizeof(*sd), GFP_KERNEL);
if (!sd) {
- printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum);
- return NULL;
+ printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum);
+ return;
}
-
- sd->node = get_mp_bus_to_node(busnum);
-
+ sd->node = x86_pci_root_bus_node(busnum);
+ x86_pci_root_bus_resources(busnum, &resources);
printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
- bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
- if (!bus)
+ bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources);
+ if (!bus) {
+ pci_free_resource_list(&resources);
kfree(sd);
-
- return bus;
+ }
}
+
void __init pcibios_set_cache_line_size(void)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
@@ -497,7 +512,7 @@ int __init pcibios_init(void)
return 0;
}
-char * __devinit pcibios_setup(char *str)
+char * __init pcibios_setup(char *str)
{
if (!strcmp(str, "off")) {
pci_probe = 0;
@@ -552,7 +567,6 @@ char * __devinit pcibios_setup(char *str)
pci_probe |= PCI_PROBE_NOEARLY;
return NULL;
}
-#ifndef CONFIG_X86_VISWS
else if (!strcmp(str, "usepirqmask")) {
pci_probe |= PCI_USE_PIRQ_MASK;
return NULL;
@@ -562,9 +576,7 @@ char * __devinit pcibios_setup(char *str)
} else if (!strncmp(str, "lastbus=", 8)) {
pcibios_last_bus = simple_strtol(str+8, NULL, 0);
return NULL;
- }
-#endif
- else if (!strcmp(str, "rom")) {
+ } else if (!strcmp(str, "rom")) {
pci_probe |= PCI_ASSIGN_ROMS;
return NULL;
} else if (!strcmp(str, "norom")) {
@@ -611,6 +623,38 @@ unsigned int pcibios_assign_all_busses(void)
return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
}
+int pcibios_add_device(struct pci_dev *dev)
+{
+ struct setup_data *data;
+ struct pci_setup_rom *rom;
+ u64 pa_data;
+
+ pa_data = boot_params.hdr.setup_data;
+ while (pa_data) {
+ data = ioremap(pa_data, sizeof(*rom));
+ if (!data)
+ return -ENOMEM;
+
+ if (data->type == SETUP_PCI) {
+ rom = (struct pci_setup_rom *)data;
+
+ if ((pci_domain_nr(dev->bus) == rom->segment) &&
+ (dev->bus->number == rom->bus) &&
+ (PCI_SLOT(dev->devfn) == rom->device) &&
+ (PCI_FUNC(dev->devfn) == rom->function) &&
+ (dev->vendor == rom->vendor) &&
+ (dev->device == rom->devid)) {
+ dev->rom = pa_data +
+ offsetof(struct pci_setup_rom, romdata);
+ dev->romlen = rom->pcilen;
+ }
+ }
+ pa_data = data->next;
+ iounmap(data);
+ }
+ return 0;
+}
+
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
int err;
@@ -629,107 +673,10 @@ void pcibios_disable_device (struct pci_dev *dev)
pcibios_disable_irq(dev);
}
-int pci_ext_cfg_avail(struct pci_dev *dev)
+int pci_ext_cfg_avail(void)
{
if (raw_pci_ext_ops)
return 1;
else
return 0;
}
-
-struct pci_bus * __devinit pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node)
-{
- struct pci_bus *bus = NULL;
- struct pci_sysdata *sd;
-
- /*
- * Allocate per-root-bus (not per bus) arch-specific data.
- * TODO: leak; this memory is never freed.
- * It's arguable whether it's worth the trouble to care.
- */
- sd = kzalloc(sizeof(*sd), GFP_KERNEL);
- if (!sd) {
- printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno);
- return NULL;
- }
- sd->node = node;
- bus = pci_scan_bus(busno, ops, sd);
- if (!bus)
- kfree(sd);
-
- return bus;
-}
-
-struct pci_bus * __devinit pci_scan_bus_with_sysdata(int busno)
-{
- return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
-}
-
-/*
- * NUMA info for PCI busses
- *
- * Early arch code is responsible for filling in reasonable values here.
- * A node id of "-1" means "use current node". In other words, if a bus
- * has a -1 node id, it's not tightly coupled to any particular chunk
- * of memory (as is the case on some Nehalem systems).
- */
-#ifdef CONFIG_NUMA
-
-#define BUS_NR 256
-
-#ifdef CONFIG_X86_64
-
-static int mp_bus_to_node[BUS_NR] = {
- [0 ... BUS_NR - 1] = -1
-};
-
-void set_mp_bus_to_node(int busnum, int node)
-{
- if (busnum >= 0 && busnum < BUS_NR)
- mp_bus_to_node[busnum] = node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
- int node = -1;
-
- if (busnum < 0 || busnum > (BUS_NR - 1))
- return node;
-
- node = mp_bus_to_node[busnum];
-
- /*
- * let numa_node_id to decide it later in dma_alloc_pages
- * if there is no ram on that node
- */
- if (node != -1 && !node_online(node))
- node = -1;
-
- return node;
-}
-
-#else /* CONFIG_X86_32 */
-
-static int mp_bus_to_node[BUS_NR] = {
- [0 ... BUS_NR - 1] = -1
-};
-
-void set_mp_bus_to_node(int busnum, int node)
-{
- if (busnum >= 0 && busnum < BUS_NR)
- mp_bus_to_node[busnum] = (unsigned char) node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
- int node;
-
- if (busnum < 0 || busnum > (BUS_NR - 1))
- return 0;
- node = mp_bus_to_node[busnum];
- return node;
-}
-
-#endif /* CONFIG_X86_32 */
-
-#endif /* CONFIG_NUMA */
diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index bd33620b007..15460590b8c 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -22,7 +22,7 @@ static int pci_conf1_read(unsigned int seg, unsigned int bus,
{
unsigned long flags;
- if ((bus > 255) || (devfn > 255) || (reg > 4095)) {
+ if (seg || (bus > 255) || (devfn > 255) || (reg > 4095)) {
*value = -1;
return -EINVAL;
}
@@ -53,7 +53,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus,
{
unsigned long flags;
- if ((bus > 255) || (devfn > 255) || (reg > 4095))
+ if (seg || (bus > 255) || (devfn > 255) || (reg > 4095))
return -EINVAL;
raw_spin_lock_irqsave(&pci_config_lock, flags);
@@ -79,7 +79,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus,
#undef PCI_CONF1_ADDRESS
-struct pci_raw_ops pci_direct_conf1 = {
+const struct pci_raw_ops pci_direct_conf1 = {
.read = pci_conf1_read,
.write = pci_conf1_write,
};
@@ -97,6 +97,7 @@ static int pci_conf2_read(unsigned int seg, unsigned int bus,
unsigned long flags;
int dev, fn;
+ WARN_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255)) {
*value = -1;
return -EINVAL;
@@ -138,6 +139,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus,
unsigned long flags;
int dev, fn;
+ WARN_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
@@ -173,7 +175,7 @@ static int pci_conf2_write(unsigned int seg, unsigned int bus,
#undef PCI_CONF2_ADDRESS
-struct pci_raw_ops pci_direct_conf2 = {
+static const struct pci_raw_ops pci_direct_conf2 = {
.read = pci_conf2_read,
.write = pci_conf2_write,
};
@@ -189,7 +191,7 @@ struct pci_raw_ops pci_direct_conf2 = {
* This should be close to trivial, but it isn't, because there are buggy
* chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
*/
-static int __init pci_sanity_check(struct pci_raw_ops *o)
+static int __init pci_sanity_check(const struct pci_raw_ops *o)
{
u32 x = 0;
int year, devfn;
@@ -280,12 +282,9 @@ void __init pci_direct_init(int type)
int __init pci_direct_probe(void)
{
- struct resource *region, *region2;
-
if ((pci_probe & PCI_PROBE_CONF1) == 0)
goto type2;
- region = request_region(0xCF8, 8, "PCI conf1");
- if (!region)
+ if (!request_region(0xCF8, 8, "PCI conf1"))
goto type2;
if (pci_check_type1()) {
@@ -293,16 +292,14 @@ int __init pci_direct_probe(void)
port_cf9_safe = true;
return 1;
}
- release_resource(region);
+ release_region(0xCF8, 8);
type2:
if ((pci_probe & PCI_PROBE_CONF2) == 0)
return 0;
- region = request_region(0xCF8, 4, "PCI conf2");
- if (!region)
+ if (!request_region(0xCF8, 4, "PCI conf2"))
return 0;
- region2 = request_region(0xC000, 0x1000, "PCI conf2");
- if (!region2)
+ if (!request_region(0xC000, 0x1000, "PCI conf2"))
goto fail2;
if (pci_check_type2()) {
@@ -311,8 +308,8 @@ int __init pci_direct_probe(void)
return 2;
}
- release_resource(region2);
+ release_region(0xC000, 0x1000);
fail2:
- release_resource(region);
+ release_region(0xCF8, 4);
return 0;
}
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index 6dd89555fbf..b5e60268d93 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -5,10 +5,11 @@
#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/pci.h>
-#include <linux/init.h>
+#include <linux/vgaarb.h>
+#include <asm/hpet.h>
#include <asm/pci_x86.h>
-static void __devinit pci_fixup_i450nx(struct pci_dev *d)
+static void pci_fixup_i450nx(struct pci_dev *d)
{
/*
* i450NX -- Find and scan all secondary buses on all PXB's.
@@ -25,15 +26,15 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
suba, subb);
if (busno)
- pci_scan_bus_with_sysdata(busno); /* Bus A */
+ pcibios_scan_root(busno); /* Bus A */
if (suba < subb)
- pci_scan_bus_with_sysdata(suba+1); /* Bus B */
+ pcibios_scan_root(suba+1); /* Bus B */
}
pcibios_last_bus = -1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
-static void __devinit pci_fixup_i450gx(struct pci_dev *d)
+static void pci_fixup_i450gx(struct pci_dev *d)
{
/*
* i450GX and i450KX -- Find and scan all secondary buses.
@@ -42,12 +43,12 @@ static void __devinit pci_fixup_i450gx(struct pci_dev *d)
u8 busno;
pci_read_config_byte(d, 0x4a, &busno);
dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno);
- pci_scan_bus_with_sysdata(busno);
+ pcibios_scan_root(busno);
pcibios_last_bus = -1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx);
-static void __devinit pci_fixup_umc_ide(struct pci_dev *d)
+static void pci_fixup_umc_ide(struct pci_dev *d)
{
/*
* UM8886BF IDE controller sets region type bits incorrectly,
@@ -61,7 +62,7 @@ static void __devinit pci_fixup_umc_ide(struct pci_dev *d)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
-static void __devinit pci_fixup_ncr53c810(struct pci_dev *d)
+static void pci_fixup_ncr53c810(struct pci_dev *d)
{
/*
* NCR 53C810 returns class code 0 (at least on some systems).
@@ -74,7 +75,7 @@ static void __devinit pci_fixup_ncr53c810(struct pci_dev *d)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810);
-static void __devinit pci_fixup_latency(struct pci_dev *d)
+static void pci_fixup_latency(struct pci_dev *d)
{
/*
* SiS 5597 and 5598 chipsets require latency timer set to
@@ -86,7 +87,7 @@ static void __devinit pci_fixup_latency(struct pci_dev *d)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
-static void __devinit pci_fixup_piix4_acpi(struct pci_dev *d)
+static void pci_fixup_piix4_acpi(struct pci_dev *d)
{
/*
* PIIX4 ACPI device: hardwired IRQ9
@@ -162,13 +163,13 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_
* system to PCI bus no matter what are their window settings, so they are
* "transparent" (or subtractive decoding) from programmers point of view.
*/
-static void __devinit pci_fixup_transparent_bridge(struct pci_dev *dev)
+static void pci_fixup_transparent_bridge(struct pci_dev *dev)
{
- if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
- (dev->device & 0xff00) == 0x2400)
+ if ((dev->device & 0xff00) == 0x2400)
dev->transparent = 1;
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixup_transparent_bridge);
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_PCI, 8, pci_fixup_transparent_bridge);
/*
* Fixup for C1 Halt Disconnect problem on nForce2 systems.
@@ -230,7 +231,7 @@ static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int wh
offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)];
if ((offset) && (where == offset))
- value = value & 0xfffffffc;
+ value = value & ~PCI_EXP_LNKCTL_ASPMC;
return raw_pci_write(pci_domain_nr(bus), bus->number,
devfn, where, size, value);
@@ -251,7 +252,7 @@ static struct pci_ops quirk_pcie_aspm_ops = {
*/
static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
{
- int cap_base, i;
+ int i;
struct pci_bus *pbus;
struct pci_dev *dev;
@@ -277,7 +278,7 @@ static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
for (i = GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i)
quirk_aspm_offset[i] = 0;
- pbus->ops = pbus->parent->ops;
+ pci_bus_set_ops(pbus, pbus->parent->ops);
} else {
/*
* If devices are attached to the root port at power-up or
@@ -285,13 +286,15 @@ static void pcie_rootport_aspm_quirk(struct pci_dev *pdev)
* each root port to save the register offsets and replace the
* bus ops.
*/
- list_for_each_entry(dev, &pbus->devices, bus_list) {
+ list_for_each_entry(dev, &pbus->devices, bus_list)
/* There are 0 to 8 devices attached to this bus */
- cap_base = pci_find_capability(dev, PCI_CAP_ID_EXP);
- quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)] = cap_base + 0x10;
- }
- pbus->ops = &quirk_pcie_aspm_ops;
+ quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)] =
+ dev->pcie_cap + PCI_EXP_LNKCTL;
+
+ pci_bus_set_ops(pbus, &quirk_pcie_aspm_ops);
+ dev_info(&pbus->dev, "writes to ASPM control bits will be ignored\n");
}
+
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk);
@@ -311,20 +314,18 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_r
* IORESOURCE_ROM_SHADOW is used to associate the boot video
* card with this copy. On laptops this copy has to be used since
* the main ROM may be compressed or combined with another image.
- * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW
- * is marked here since the boot video device will be the only enabled
- * video device at this point.
+ * See pci_map_rom() for use of this flag. Before marking the device
+ * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set
+ * by either arch cde or vga-arbitration, if so only apply the fixup to this
+ * already determined primary video card.
*/
-static void __devinit pci_fixup_video(struct pci_dev *pdev)
+static void pci_fixup_video(struct pci_dev *pdev)
{
struct pci_dev *bridge;
struct pci_bus *bus;
u16 config;
- if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
- return;
-
/* Is VGA routed to us? */
bus = pdev->bus;
while (bus) {
@@ -337,9 +338,7 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev)
* type BRIDGE, or CARDBUS. Host to PCI controllers use
* PCI header type NORMAL.
*/
- if (bridge
- && ((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- || (bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) {
+ if (bridge && (pci_is_bridge(bridge))) {
pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
&config);
if (!(config & PCI_BRIDGE_CTL_VGA))
@@ -347,16 +346,20 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev)
}
bus = bus->parent;
}
- pci_read_config_word(pdev, PCI_COMMAND, &config);
- if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
- pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
+ if (!vga_default_device() || pdev == vga_default_device()) {
+ pci_read_config_word(pdev, PCI_COMMAND, &config);
+ if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
+ pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
+ dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
+ vga_set_default_device(pdev);
+ }
}
}
-DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video);
-static const struct dmi_system_id __devinitconst msi_k8t_dmi_table[] = {
+static const struct dmi_system_id msi_k8t_dmi_table[] = {
{
.ident = "MSI-K8T-Neo2Fir",
.matches = {
@@ -377,7 +380,7 @@ static const struct dmi_system_id __devinitconst msi_k8t_dmi_table[] = {
* The soundcard is only enabled, if the mainborad is identified
* via DMI-tables and the soundcard is detected to be off.
*/
-static void __devinit pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev)
+static void pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev)
{
unsigned char val;
if (!dmi_check_system(msi_k8t_dmi_table))
@@ -413,7 +416,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237,
*/
static u16 toshiba_line_size;
-static const struct dmi_system_id __devinitconst toshiba_ohci1394_dmi_table[] = {
+static const struct dmi_system_id toshiba_ohci1394_dmi_table[] = {
{
.ident = "Toshiba PS5 based laptop",
.matches = {
@@ -438,7 +441,7 @@ static const struct dmi_system_id __devinitconst toshiba_ohci1394_dmi_table[] =
{ }
};
-static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev)
+static void pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev)
{
if (!dmi_check_system(toshiba_ohci1394_dmi_table))
return; /* only applies to certain Toshibas (so far) */
@@ -449,7 +452,7 @@ static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032,
pci_pre_fixup_toshiba_ohci1394);
-static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev)
+static void pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev)
{
if (!dmi_check_system(toshiba_ohci1394_dmi_table))
return; /* only applies to certain Toshibas (so far) */
@@ -487,7 +490,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
* Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller:
* prevent update of the BAR0, which doesn't look like a normal BAR.
*/
-static void __devinit pci_siemens_interrupt_controller(struct pci_dev *dev)
+static void pci_siemens_interrupt_controller(struct pci_dev *dev)
{
dev->resource[0].flags |= IORESOURCE_PCI_FIXED;
}
@@ -521,3 +524,33 @@ static void sb600_disable_hpet_bar(struct pci_dev *dev)
}
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar);
+
+#ifdef CONFIG_HPET_TIMER
+static void sb600_hpet_quirk(struct pci_dev *dev)
+{
+ struct resource *r = &dev->resource[1];
+
+ if (r->flags & IORESOURCE_MEM && r->start == hpet_address) {
+ r->flags |= IORESOURCE_PCI_FIXED;
+ dev_info(&dev->dev, "reg 0x14 contains HPET; making it immovable\n");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x4385, sb600_hpet_quirk);
+#endif
+
+/*
+ * Twinhead H12Y needs us to block out a region otherwise we map devices
+ * there and any access kills the box.
+ *
+ * See: https://bugzilla.kernel.org/show_bug.cgi?id=10231
+ *
+ * Match off the LPC and svid/sdid (older kernels lose the bridge subvendor)
+ */
+static void twinhead_reserve_killing_zone(struct pci_dev *dev)
+{
+ if (dev->subsystem_vendor == 0x14FF && dev->subsystem_device == 0xA003) {
+ pr_info("Reserving memory on Twinhead H12Y\n");
+ request_mem_region(0xFFB00000, 0x100000, "twinhead");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index b1805b78842..a19ed92e74e 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -26,6 +26,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ioport.h>
@@ -38,6 +39,95 @@
#include <asm/io_apic.h>
+/*
+ * This list of dynamic mappings is for temporarily maintaining
+ * original BIOS BAR addresses for possible reinstatement.
+ */
+struct pcibios_fwaddrmap {
+ struct list_head list;
+ struct pci_dev *dev;
+ resource_size_t fw_addr[DEVICE_COUNT_RESOURCE];
+};
+
+static LIST_HEAD(pcibios_fwaddrmappings);
+static DEFINE_SPINLOCK(pcibios_fwaddrmap_lock);
+static bool pcibios_fw_addr_done;
+
+/* Must be called with 'pcibios_fwaddrmap_lock' lock held. */
+static struct pcibios_fwaddrmap *pcibios_fwaddrmap_lookup(struct pci_dev *dev)
+{
+ struct pcibios_fwaddrmap *map;
+
+ WARN_ON_SMP(!spin_is_locked(&pcibios_fwaddrmap_lock));
+
+ list_for_each_entry(map, &pcibios_fwaddrmappings, list)
+ if (map->dev == dev)
+ return map;
+
+ return NULL;
+}
+
+static void
+pcibios_save_fw_addr(struct pci_dev *dev, int idx, resource_size_t fw_addr)
+{
+ unsigned long flags;
+ struct pcibios_fwaddrmap *map;
+
+ if (pcibios_fw_addr_done)
+ return;
+
+ spin_lock_irqsave(&pcibios_fwaddrmap_lock, flags);
+ map = pcibios_fwaddrmap_lookup(dev);
+ if (!map) {
+ spin_unlock_irqrestore(&pcibios_fwaddrmap_lock, flags);
+ map = kzalloc(sizeof(*map), GFP_KERNEL);
+ if (!map)
+ return;
+
+ map->dev = pci_dev_get(dev);
+ map->fw_addr[idx] = fw_addr;
+ INIT_LIST_HEAD(&map->list);
+
+ spin_lock_irqsave(&pcibios_fwaddrmap_lock, flags);
+ list_add_tail(&map->list, &pcibios_fwaddrmappings);
+ } else
+ map->fw_addr[idx] = fw_addr;
+ spin_unlock_irqrestore(&pcibios_fwaddrmap_lock, flags);
+}
+
+resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx)
+{
+ unsigned long flags;
+ struct pcibios_fwaddrmap *map;
+ resource_size_t fw_addr = 0;
+
+ if (pcibios_fw_addr_done)
+ return 0;
+
+ spin_lock_irqsave(&pcibios_fwaddrmap_lock, flags);
+ map = pcibios_fwaddrmap_lookup(dev);
+ if (map)
+ fw_addr = map->fw_addr[idx];
+ spin_unlock_irqrestore(&pcibios_fwaddrmap_lock, flags);
+
+ return fw_addr;
+}
+
+static void __init pcibios_fw_addr_list_del(void)
+{
+ unsigned long flags;
+ struct pcibios_fwaddrmap *entry, *next;
+
+ spin_lock_irqsave(&pcibios_fwaddrmap_lock, flags);
+ list_for_each_entry_safe(entry, next, &pcibios_fwaddrmappings, list) {
+ list_del(&entry->list);
+ pci_dev_put(entry->dev);
+ kfree(entry);
+ }
+ spin_unlock_irqrestore(&pcibios_fwaddrmap_lock, flags);
+ pcibios_fw_addr_done = true;
+}
+
static int
skip_isa_ioresource_align(struct pci_dev *dev) {
@@ -111,46 +201,48 @@ EXPORT_SYMBOL(pcibios_align_resource);
* as well.
*/
-static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
+static void pcibios_allocate_bridge_resources(struct pci_dev *dev)
{
- struct pci_bus *bus;
- struct pci_dev *dev;
int idx;
struct resource *r;
- /* Depth-First Search on bus tree */
- list_for_each_entry(bus, bus_list, node) {
- if ((dev = bus->self)) {
- for (idx = PCI_BRIDGE_RESOURCES;
- idx < PCI_NUM_RESOURCES; idx++) {
- r = &dev->resource[idx];
- if (!r->flags)
- continue;
- if (!r->start ||
- pci_claim_resource(dev, idx) < 0) {
- /*
- * Something is wrong with the region.
- * Invalidate the resource to prevent
- * child resource allocations in this
- * range.
- */
- r->start = r->end = 0;
- r->flags = 0;
- }
- }
+ for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
+ r = &dev->resource[idx];
+ if (!r->flags)
+ continue;
+ if (r->parent) /* Already allocated */
+ continue;
+ if (!r->start || pci_claim_resource(dev, idx) < 0) {
+ /*
+ * Something is wrong with the region.
+ * Invalidate the resource to prevent
+ * child resource allocations in this
+ * range.
+ */
+ r->start = r->end = 0;
+ r->flags = 0;
}
- pcibios_allocate_bus_resources(&bus->children);
}
}
+static void pcibios_allocate_bus_resources(struct pci_bus *bus)
+{
+ struct pci_bus *child;
+
+ /* Depth-First Search on bus tree */
+ if (bus->self)
+ pcibios_allocate_bridge_resources(bus->self);
+ list_for_each_entry(child, &bus->children, node)
+ pcibios_allocate_bus_resources(child);
+}
+
struct pci_check_idx_range {
int start;
int end;
};
-static void __init pcibios_allocate_resources(int pass)
+static void pcibios_allocate_dev_resources(struct pci_dev *dev, int pass)
{
- struct pci_dev *dev = NULL;
int idx, disabled, i;
u16 command;
struct resource *r;
@@ -162,14 +254,13 @@ static void __init pcibios_allocate_resources(int pass)
#endif
};
- for_each_pci_dev(dev) {
- pci_read_config_word(dev, PCI_COMMAND, &command);
- for (i = 0; i < ARRAY_SIZE(idx_range); i++)
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ for (i = 0; i < ARRAY_SIZE(idx_range); i++)
for (idx = idx_range[i].start; idx <= idx_range[i].end; idx++) {
r = &dev->resource[idx];
- if (r->parent) /* Already allocated */
+ if (r->parent) /* Already allocated */
continue;
- if (!r->start) /* Address not assigned at all */
+ if (!r->start) /* Address not assigned at all */
continue;
if (r->flags & IORESOURCE_IO)
disabled = !(command & PCI_COMMAND_IO);
@@ -180,71 +271,94 @@ static void __init pcibios_allocate_resources(int pass)
"BAR %d: reserving %pr (d=%d, p=%d)\n",
idx, r, disabled, pass);
if (pci_claim_resource(dev, idx) < 0) {
- /* We'll assign a new address later */
- dev->fw_addr[idx] = r->start;
- r->end -= r->start;
- r->start = 0;
+ if (r->flags & IORESOURCE_PCI_FIXED) {
+ dev_info(&dev->dev, "BAR %d %pR is immovable\n",
+ idx, r);
+ } else {
+ /* We'll assign a new address later */
+ pcibios_save_fw_addr(dev,
+ idx, r->start);
+ r->end -= r->start;
+ r->start = 0;
+ }
}
}
}
- if (!pass) {
- r = &dev->resource[PCI_ROM_RESOURCE];
- if (r->flags & IORESOURCE_ROM_ENABLE) {
- /* Turn the ROM off, leave the resource region,
- * but keep it unregistered. */
- u32 reg;
- dev_dbg(&dev->dev, "disabling ROM %pR\n", r);
- r->flags &= ~IORESOURCE_ROM_ENABLE;
- pci_read_config_dword(dev,
- dev->rom_base_reg, &reg);
- pci_write_config_dword(dev, dev->rom_base_reg,
+ if (!pass) {
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (r->flags & IORESOURCE_ROM_ENABLE) {
+ /* Turn the ROM off, leave the resource region,
+ * but keep it unregistered. */
+ u32 reg;
+ dev_dbg(&dev->dev, "disabling ROM %pR\n", r);
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+ pci_write_config_dword(dev, dev->rom_base_reg,
reg & ~PCI_ROM_ADDRESS_ENABLE);
- }
}
}
}
-static int __init pcibios_assign_resources(void)
+static void pcibios_allocate_resources(struct pci_bus *bus, int pass)
+{
+ struct pci_dev *dev;
+ struct pci_bus *child;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ pcibios_allocate_dev_resources(dev, pass);
+
+ child = dev->subordinate;
+ if (child)
+ pcibios_allocate_resources(child, pass);
+ }
+}
+
+static void pcibios_allocate_dev_rom_resource(struct pci_dev *dev)
{
- struct pci_dev *dev = NULL;
struct resource *r;
- if (!(pci_probe & PCI_ASSIGN_ROMS)) {
- /*
- * Try to use BIOS settings for ROMs, otherwise let
- * pci_assign_unassigned_resources() allocate the new
- * addresses.
- */
- for_each_pci_dev(dev) {
- r = &dev->resource[PCI_ROM_RESOURCE];
- if (!r->flags || !r->start)
- continue;
- if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
- r->end -= r->start;
- r->start = 0;
- }
- }
+ /*
+ * Try to use BIOS settings for ROMs, otherwise let
+ * pci_assign_unassigned_resources() allocate the new
+ * addresses.
+ */
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (!r->flags || !r->start)
+ return;
+ if (r->parent) /* Already allocated */
+ return;
+
+ if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
+ r->end -= r->start;
+ r->start = 0;
}
+}
+static void pcibios_allocate_rom_resources(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+ struct pci_bus *child;
- pci_assign_unassigned_resources();
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ pcibios_allocate_dev_rom_resource(dev);
- return 0;
+ child = dev->subordinate;
+ if (child)
+ pcibios_allocate_rom_resources(child);
+ }
}
-void __init pcibios_resource_survey(void)
+static int __init pcibios_assign_resources(void)
{
- DBG("PCI: Allocating resources\n");
- pcibios_allocate_bus_resources(&pci_root_buses);
- pcibios_allocate_resources(0);
- pcibios_allocate_resources(1);
+ struct pci_bus *bus;
- e820_reserve_resources_late();
- /*
- * Insert the IO APIC resources after PCI initialization has
- * occured to handle IO APICS that are mapped in on a BAR in
- * PCI space, but before trying to assign unassigned pci res.
- */
- ioapic_insert_resources();
+ if (!(pci_probe & PCI_ASSIGN_ROMS))
+ list_for_each_entry(bus, &pci_root_buses, node)
+ pcibios_allocate_rom_resources(bus);
+
+ pci_assign_unassigned_resources();
+ pcibios_fw_addr_list_del();
+
+ return 0;
}
/**
@@ -253,24 +367,40 @@ void __init pcibios_resource_survey(void)
*/
fs_initcall(pcibios_assign_resources);
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as certain crappy BIOSes forget to set it properly.
- */
-unsigned int pcibios_max_latency = 255;
+void pcibios_resource_survey_bus(struct pci_bus *bus)
+{
+ dev_printk(KERN_DEBUG, &bus->dev, "Allocating resources\n");
-void pcibios_set_master(struct pci_dev *dev)
+ pcibios_allocate_bus_resources(bus);
+
+ pcibios_allocate_resources(bus, 0);
+ pcibios_allocate_resources(bus, 1);
+
+ if (!(pci_probe & PCI_ASSIGN_ROMS))
+ pcibios_allocate_rom_resources(bus);
+}
+
+void __init pcibios_resource_survey(void)
{
- u8 lat;
- pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
- if (lat < 16)
- lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
- else if (lat > pcibios_max_latency)
- lat = pcibios_max_latency;
- else
- return;
- dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+ struct pci_bus *bus;
+
+ DBG("PCI: Allocating resources\n");
+
+ list_for_each_entry(bus, &pci_root_buses, node)
+ pcibios_allocate_bus_resources(bus);
+
+ list_for_each_entry(bus, &pci_root_buses, node)
+ pcibios_allocate_resources(bus, 0);
+ list_for_each_entry(bus, &pci_root_buses, node)
+ pcibios_allocate_resources(bus, 1);
+
+ e820_reserve_resources_late();
+ /*
+ * Insert the IO APIC resources after PCI initialization has
+ * occurred to handle IO APICS that are mapped in on a BAR in
+ * PCI space, but before trying to assign unassigned pci res.
+ */
+ ioapic_insert_resources();
}
static const struct vm_operations_struct pci_mmap_ops = {
@@ -304,7 +434,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
/*
* ioremap() and ioremap_nocache() defaults to UC MINUS for now.
* To avoid attribute conflicts, request UC MINUS here
- * aswell.
+ * as well.
*/
prot |= _PAGE_CACHE_UC_MINUS;
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/intel_mid_pci.c
index cb29191cee5..84b9d672843 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -1,5 +1,5 @@
/*
- * Moorestown PCI support
+ * Intel MID PCI support
* Copyright (c) 2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
@@ -23,14 +23,15 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/smp.h>
-#include <asm/acpi.h>
#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/smp.h>
#include <asm/pci_x86.h>
#include <asm/hw_irq.h>
#include <asm/io_apic.h>
+#include <asm/intel-mid.h>
#define PCIE_CAP_OFFSET 0x100
@@ -43,6 +44,8 @@
#define PCI_FIXED_BAR_4_SIZE 0x14
#define PCI_FIXED_BAR_5_SIZE 0x1c
+static int pci_soc_mode;
+
/**
* fixed_bar_cap - return the offset of the fixed BAR cap if found
* @bus: PCI bus
@@ -139,7 +142,8 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
*/
static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
{
- /* This is a workaround for A0 LNC bug where PCI status register does
+ /*
+ * This is a workaround for A0 LNC bug where PCI status register does
* not have new CAP bit set. can not be written by SW either.
*
* PCI header type in real LNC indicates a single function device, this
@@ -147,10 +151,12 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
* shim. Therefore, use the header type in shim instead.
*/
if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE)
- return 0;
- if (bus == 0 && (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(0, 0)))
- return 1;
- return 0; /* langwell on others */
+ return false;
+ if (bus == 0 && (devfn == PCI_DEVFN(2, 0)
+ || devfn == PCI_DEVFN(0, 0)
+ || devfn == PCI_DEVFN(3, 0)))
+ return true;
+ return false; /* Langwell on others */
}
static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
@@ -168,7 +174,8 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
{
int offset;
- /* On MRST, there is no PCI ROM BAR, this will cause a subsequent read
+ /*
+ * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
* to ROM BAR return 0 then being ignored.
*/
if (where == PCI_ROM_ADDRESS)
@@ -199,55 +206,95 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
where, size, value);
}
-static int mrst_pci_irq_enable(struct pci_dev *dev)
+static int intel_mid_pci_irq_enable(struct pci_dev *dev)
{
u8 pin;
struct io_apic_irq_attr irq_attr;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- /* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
+ /*
+ * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
* IOAPIC RTE entries, so we just enable RTE for the device.
*/
irq_attr.ioapic = mp_find_ioapic(dev->irq);
irq_attr.ioapic_pin = dev->irq;
irq_attr.trigger = 1; /* level */
- irq_attr.polarity = 1; /* active low */
+ if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
+ irq_attr.polarity = 0; /* active high */
+ else
+ irq_attr.polarity = 1; /* active low */
io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
return 0;
}
-struct pci_ops pci_mrst_ops = {
+struct pci_ops intel_mid_pci_ops = {
.read = pci_read,
.write = pci_write,
};
/**
- * pci_mrst_init - installs pci_mrst_ops
+ * intel_mid_pci_init - installs intel_mid_pci_ops
*
* Moorestown has an interesting PCI implementation (see above).
* Called when the early platform detection installs it.
*/
-int __init pci_mrst_init(void)
+int __init intel_mid_pci_init(void)
{
- printk(KERN_INFO "Moorestown platform detected, using MRST PCI ops\n");
+ pr_info("Intel MID platform detected, using MID PCI ops\n");
pci_mmcfg_late_init();
- pcibios_enable_irq = mrst_pci_irq_enable;
- pci_root_ops = pci_mrst_ops;
+ pcibios_enable_irq = intel_mid_pci_irq_enable;
+ pci_root_ops = intel_mid_pci_ops;
+ pci_soc_mode = 1;
/* Continue with standard init */
return 1;
}
/*
+ * Langwell devices are not true PCI devices; they are not subject to 10 ms
+ * d3 to d0 delay required by PCI spec.
+ */
+static void pci_d3delay_fixup(struct pci_dev *dev)
+{
+ /*
+ * PCI fixups are effectively decided compile time. If we have a dual
+ * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
+ */
+ if (!pci_soc_mode)
+ return;
+ /*
+ * True PCI devices in Lincroft should allow type 1 access, the rest
+ * are Langwell fake PCI devices.
+ */
+ if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
+ return;
+ dev->d3_delay = 0;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
+
+static void mrst_power_off_unused_dev(struct pci_dev *dev)
+{
+ pci_set_power_state(dev, PCI_D3hot);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0812, mrst_power_off_unused_dev);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev);
+
+/*
* Langwell devices reside at fixed offsets, don't try to move them.
*/
-static void __devinit pci_fixed_bar_fixup(struct pci_dev *dev)
+static void pci_fixed_bar_fixup(struct pci_dev *dev)
{
unsigned long offset;
u32 size;
int i;
+ if (!pci_soc_mode)
+ return;
+
/* Must have extended configuration space */
if (dev->cfg_size < PCIE_CAP_OFFSET + 4)
return;
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 87e6c832311..84112f55dd7 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -136,13 +136,9 @@ static void __init pirq_peer_trick(void)
busmap[e->bus] = 1;
}
for (i = 1; i < 256; i++) {
- int node;
if (!busmap[i] || pci_find_bus(0, i))
continue;
- node = get_mp_bus_to_node(i);
- if (pci_scan_bus_on_node(i, &pci_root_ops, node))
- printk(KERN_INFO "PCI: Discovered primary peer "
- "bus %02x [IRQ]\n", i);
+ pcibios_scan_root(i);
}
pcibios_last_bus = -1;
}
@@ -597,21 +593,20 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
return 1;
}
- if ((device >= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN) &&
- (device <= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX)) {
+ if ((device >= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN &&
+ device <= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX)
+ || (device >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN &&
+ device <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX)
+ || (device >= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN &&
+ device <= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX)
+ || (device >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN &&
+ device <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) {
r->name = "PIIX/ICH";
r->get = pirq_piix_get;
r->set = pirq_piix_set;
return 1;
}
- if ((device >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN) &&
- (device <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX)) {
- r->name = "PIIX/ICH";
- r->get = pirq_piix_get;
- r->set = pirq_piix_set;
- return 1;
- }
return 0;
}
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index c89266be604..5b662c0faf8 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -2,6 +2,7 @@
* legacy.c - traditional, old school PCI bus probing
*/
#include <linux/init.h>
+#include <linux/export.h>
#include <linux/pci.h>
#include <asm/pci_x86.h>
@@ -9,7 +10,7 @@
* Discover remaining PCI buses in case there are peer host bridges.
* We use the number of last PCI bus provided by the PCI BIOS.
*/
-static void __devinit pcibios_fixup_peer_bridges(void)
+static void pcibios_fixup_peer_bridges(void)
{
int n;
@@ -29,29 +30,24 @@ int __init pci_legacy_init(void)
}
printk("PCI: Probing PCI hardware\n");
- pci_root_bus = pcibios_scan_root(0);
- if (pci_root_bus)
- pci_bus_add_devices(pci_root_bus);
-
+ pcibios_scan_root(0);
return 0;
}
-void __devinit pcibios_scan_specific_bus(int busn)
+void pcibios_scan_specific_bus(int busn)
{
int devfn;
- long node;
u32 l;
if (pci_find_bus(0, busn))
return;
- node = get_mp_bus_to_node(busn);
for (devfn = 0; devfn < 256; devfn += 8) {
if (!raw_pci_read(0, busn, devfn, PCI_VENDOR_ID, 2, &l) &&
l != 0x0000 && l != 0xffff) {
DBG("Found device at %02x:%02x [%04x]\n", busn, devfn, l);
printk(KERN_INFO "PCI: Discovered peer bus %02x\n", busn);
- pci_scan_bus_on_node(busn, &pci_root_ops, node);
+ pcibios_scan_root(busn);
return;
}
}
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index e282886616a..248642f4bab 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -12,11 +12,12 @@
#include <linux/pci.h>
#include <linux/init.h>
-#include <linux/acpi.h>
#include <linux/sfi_acpi.h>
#include <linux/bitmap.h>
#include <linux/dmi.h>
#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/rculist.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
#include <asm/acpi.h>
@@ -24,7 +25,9 @@
#define PREFIX "PCI: "
/* Indicate if the mmcfg resources have been placed into the resource table. */
-static int __initdata pci_mmcfg_resources_inserted;
+static bool pci_mmcfg_running_state;
+static bool pci_mmcfg_arch_init_failed;
+static DEFINE_MUTEX(pci_mmcfg_lock);
LIST_HEAD(pci_mmcfg_list);
@@ -45,24 +48,24 @@ static __init void free_all_mmcfg(void)
pci_mmconfig_remove(cfg);
}
-static __init void list_add_sorted(struct pci_mmcfg_region *new)
+static void list_add_sorted(struct pci_mmcfg_region *new)
{
struct pci_mmcfg_region *cfg;
/* keep list sorted by segment and starting bus number */
- list_for_each_entry(cfg, &pci_mmcfg_list, list) {
+ list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list) {
if (cfg->segment > new->segment ||
(cfg->segment == new->segment &&
cfg->start_bus >= new->start_bus)) {
- list_add_tail(&new->list, &cfg->list);
+ list_add_tail_rcu(&new->list, &cfg->list);
return;
}
}
- list_add_tail(&new->list, &pci_mmcfg_list);
+ list_add_tail_rcu(&new->list, &pci_mmcfg_list);
}
-static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start,
- int end, u64 addr)
+static struct pci_mmcfg_region *pci_mmconfig_alloc(int segment, int start,
+ int end, u64 addr)
{
struct pci_mmcfg_region *new;
struct resource *res;
@@ -79,8 +82,6 @@ static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start,
new->start_bus = start;
new->end_bus = end;
- list_add_sorted(new);
-
res = &new->res;
res->start = addr + PCI_MMCFG_BUS_OFFSET(start);
res->end = addr + PCI_MMCFG_BUS_OFFSET(end + 1) - 1;
@@ -89,9 +90,25 @@ static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start,
"PCI MMCONFIG %04x [bus %02x-%02x]", segment, start, end);
res->name = new->name;
- printk(KERN_INFO PREFIX "MMCONFIG for domain %04x [bus %02x-%02x] at "
- "%pR (base %#lx)\n", segment, start, end, &new->res,
- (unsigned long) addr);
+ return new;
+}
+
+static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start,
+ int end, u64 addr)
+{
+ struct pci_mmcfg_region *new;
+
+ new = pci_mmconfig_alloc(segment, start, end, addr);
+ if (new) {
+ mutex_lock(&pci_mmcfg_lock);
+ list_add_sorted(new);
+ mutex_unlock(&pci_mmcfg_lock);
+
+ pr_info(PREFIX
+ "MMCONFIG for domain %04x [bus %02x-%02x] at %pR "
+ "(base %#lx)\n",
+ segment, start, end, &new->res, (unsigned long)addr);
+ }
return new;
}
@@ -100,7 +117,7 @@ struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus)
{
struct pci_mmcfg_region *cfg;
- list_for_each_entry(cfg, &pci_mmcfg_list, list)
+ list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list)
if (cfg->segment == segment &&
cfg->start_bus <= bus && bus <= cfg->end_bus)
return cfg;
@@ -343,8 +360,7 @@ static int __init pci_mmcfg_check_hostbridge(void)
name = pci_mmcfg_probes[i].probe();
if (name)
- printk(KERN_INFO PREFIX "%s with MMCONFIG support\n",
- name);
+ pr_info(PREFIX "%s with MMCONFIG support\n", name);
}
/* some end_bus_number is crazy, fix it */
@@ -353,19 +369,7 @@ static int __init pci_mmcfg_check_hostbridge(void)
return !list_empty(&pci_mmcfg_list);
}
-static void __init pci_mmcfg_insert_resources(void)
-{
- struct pci_mmcfg_region *cfg;
-
- list_for_each_entry(cfg, &pci_mmcfg_list, list)
- insert_resource(&iomem_resource, &cfg->res);
-
- /* Mark that the resources have been inserted. */
- pci_mmcfg_resources_inserted = 1;
-}
-
-static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
- void *data)
+static acpi_status check_mcfg_resource(struct acpi_resource *res, void *data)
{
struct resource *mcfg_res = data;
struct acpi_resource_address64 address;
@@ -401,8 +405,8 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res,
return AE_OK;
}
-static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
- void *context, void **rv)
+static acpi_status find_mboard_resource(acpi_handle handle, u32 lvl,
+ void *context, void **rv)
{
struct resource *mcfg_res = context;
@@ -415,7 +419,7 @@ static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
return AE_OK;
}
-static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
+static int is_acpi_reserved(u64 start, u64 end, unsigned not_used)
{
struct resource mcfg_res;
@@ -434,13 +438,15 @@ static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
-static int __init is_mmconf_reserved(check_reserved_t is_reserved,
- struct pci_mmcfg_region *cfg, int with_e820)
+static int __ref is_mmconf_reserved(check_reserved_t is_reserved,
+ struct pci_mmcfg_region *cfg,
+ struct device *dev, int with_e820)
{
u64 addr = cfg->res.start;
u64 size = resource_size(&cfg->res);
u64 old_size = size;
- int valid = 0, num_buses;
+ int num_buses;
+ char *method = with_e820 ? "E820" : "ACPI motherboard resources";
while (!is_reserved(addr, addr + size, E820_RESERVED)) {
size >>= 1;
@@ -448,30 +454,76 @@ static int __init is_mmconf_reserved(check_reserved_t is_reserved,
break;
}
- if (size >= (16UL<<20) || size == old_size) {
- printk(KERN_INFO PREFIX "MMCONFIG at %pR reserved in %s\n",
- &cfg->res,
- with_e820 ? "E820" : "ACPI motherboard resources");
- valid = 1;
-
- if (old_size != size) {
- /* update end_bus */
- cfg->end_bus = cfg->start_bus + ((size>>20) - 1);
- num_buses = cfg->end_bus - cfg->start_bus + 1;
- cfg->res.end = cfg->res.start +
- PCI_MMCFG_BUS_OFFSET(num_buses) - 1;
- snprintf(cfg->name, PCI_MMCFG_RESOURCE_NAME_LEN,
- "PCI MMCONFIG %04x [bus %02x-%02x]",
- cfg->segment, cfg->start_bus, cfg->end_bus);
- printk(KERN_INFO PREFIX
- "MMCONFIG for %04x [bus%02x-%02x] "
- "at %pR (base %#lx) (size reduced!)\n",
- cfg->segment, cfg->start_bus, cfg->end_bus,
- &cfg->res, (unsigned long) cfg->address);
- }
+ if (size < (16UL<<20) && size != old_size)
+ return 0;
+
+ if (dev)
+ dev_info(dev, "MMCONFIG at %pR reserved in %s\n",
+ &cfg->res, method);
+ else
+ pr_info(PREFIX "MMCONFIG at %pR reserved in %s\n",
+ &cfg->res, method);
+
+ if (old_size != size) {
+ /* update end_bus */
+ cfg->end_bus = cfg->start_bus + ((size>>20) - 1);
+ num_buses = cfg->end_bus - cfg->start_bus + 1;
+ cfg->res.end = cfg->res.start +
+ PCI_MMCFG_BUS_OFFSET(num_buses) - 1;
+ snprintf(cfg->name, PCI_MMCFG_RESOURCE_NAME_LEN,
+ "PCI MMCONFIG %04x [bus %02x-%02x]",
+ cfg->segment, cfg->start_bus, cfg->end_bus);
+
+ if (dev)
+ dev_info(dev,
+ "MMCONFIG "
+ "at %pR (base %#lx) (size reduced!)\n",
+ &cfg->res, (unsigned long) cfg->address);
+ else
+ pr_info(PREFIX
+ "MMCONFIG for %04x [bus%02x-%02x] "
+ "at %pR (base %#lx) (size reduced!)\n",
+ cfg->segment, cfg->start_bus, cfg->end_bus,
+ &cfg->res, (unsigned long) cfg->address);
}
- return valid;
+ return 1;
+}
+
+static int __ref pci_mmcfg_check_reserved(struct device *dev,
+ struct pci_mmcfg_region *cfg, int early)
+{
+ if (!early && !acpi_disabled) {
+ if (is_mmconf_reserved(is_acpi_reserved, cfg, dev, 0))
+ return 1;
+
+ if (dev)
+ dev_info(dev, FW_INFO
+ "MMCONFIG at %pR not reserved in "
+ "ACPI motherboard resources\n",
+ &cfg->res);
+ else
+ pr_info(FW_INFO PREFIX
+ "MMCONFIG at %pR not reserved in "
+ "ACPI motherboard resources\n",
+ &cfg->res);
+ }
+
+ /*
+ * e820_all_mapped() is marked as __init.
+ * All entries from ACPI MCFG table have been checked at boot time.
+ * For MCFG information constructed from hotpluggable host bridge's
+ * _CBA method, just assume it's reserved.
+ */
+ if (pci_mmcfg_running_state)
+ return 1;
+
+ /* Don't try to do this check unless configuration
+ type 1 is available. how about type 2 ?*/
+ if (raw_pci_ops)
+ return is_mmconf_reserved(e820_all_mapped, cfg, dev, 1);
+
+ return 0;
}
static void __init pci_mmcfg_reject_broken(int early)
@@ -479,38 +531,14 @@ static void __init pci_mmcfg_reject_broken(int early)
struct pci_mmcfg_region *cfg;
list_for_each_entry(cfg, &pci_mmcfg_list, list) {
- int valid = 0;
-
- if (!early && !acpi_disabled) {
- valid = is_mmconf_reserved(is_acpi_reserved, cfg, 0);
-
- if (valid)
- continue;
- else
- printk(KERN_ERR FW_BUG PREFIX
- "MMCONFIG at %pR not reserved in "
- "ACPI motherboard resources\n",
- &cfg->res);
+ if (pci_mmcfg_check_reserved(NULL, cfg, early) == 0) {
+ pr_info(PREFIX "not using MMCONFIG\n");
+ free_all_mmcfg();
+ return;
}
-
- /* Don't try to do this check unless configuration
- type 1 is available. how about type 2 ?*/
- if (raw_pci_ops)
- valid = is_mmconf_reserved(e820_all_mapped, cfg, 1);
-
- if (!valid)
- goto reject;
}
-
- return;
-
-reject:
- printk(KERN_INFO PREFIX "not using MMCONFIG\n");
- free_all_mmcfg();
}
-static int __initdata known_bridge;
-
static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg,
struct acpi_mcfg_allocation *cfg)
{
@@ -519,7 +547,7 @@ static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg,
if (cfg->address < 0xFFFFFFFF)
return 0;
- if (!strcmp(mcfg->header.oem_id, "SGI"))
+ if (!strncmp(mcfg->header.oem_id, "SGI", 3))
return 0;
if (mcfg->header.revision >= 1) {
@@ -528,7 +556,7 @@ static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg,
return 0;
}
- printk(KERN_ERR PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx "
+ pr_err(PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx "
"is above 4GB, ignored\n", cfg->pci_segment,
cfg->start_bus_number, cfg->end_bus_number, cfg->address);
return -EINVAL;
@@ -553,9 +581,9 @@ static int __init pci_parse_mcfg(struct acpi_table_header *header)
while (i >= sizeof(struct acpi_mcfg_allocation)) {
entries++;
i -= sizeof(struct acpi_mcfg_allocation);
- };
+ }
if (entries == 0) {
- printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
+ pr_err(PREFIX "MMCONFIG has no entries\n");
return -ENODEV;
}
@@ -569,8 +597,7 @@ static int __init pci_parse_mcfg(struct acpi_table_header *header)
if (pci_mmconfig_add(cfg->pci_segment, cfg->start_bus_number,
cfg->end_bus_number, cfg->address) == NULL) {
- printk(KERN_WARNING PREFIX
- "no memory for MCFG entries\n");
+ pr_warn(PREFIX "no memory for MCFG entries\n");
free_all_mmcfg();
return -ENOMEM;
}
@@ -581,61 +608,65 @@ static int __init pci_parse_mcfg(struct acpi_table_header *header)
static void __init __pci_mmcfg_init(int early)
{
- /* MMCONFIG disabled */
- if ((pci_probe & PCI_PROBE_MMCONF) == 0)
- return;
-
- /* MMCONFIG already enabled */
- if (!early && !(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF))
+ pci_mmcfg_reject_broken(early);
+ if (list_empty(&pci_mmcfg_list))
return;
- /* for late to exit */
- if (known_bridge)
- return;
+ if (pcibios_last_bus < 0) {
+ const struct pci_mmcfg_region *cfg;
- if (early) {
- if (pci_mmcfg_check_hostbridge())
- known_bridge = 1;
+ list_for_each_entry(cfg, &pci_mmcfg_list, list) {
+ if (cfg->segment)
+ break;
+ pcibios_last_bus = cfg->end_bus;
+ }
}
- if (!known_bridge)
- acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
-
- pci_mmcfg_reject_broken(early);
-
- if (list_empty(&pci_mmcfg_list))
- return;
-
if (pci_mmcfg_arch_init())
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
else {
- /*
- * Signal not to attempt to insert mmcfg resources because
- * the architecture mmcfg setup could not initialize.
- */
- pci_mmcfg_resources_inserted = 1;
+ free_all_mmcfg();
+ pci_mmcfg_arch_init_failed = true;
}
}
+static int __initdata known_bridge;
+
void __init pci_mmcfg_early_init(void)
{
- __pci_mmcfg_init(1);
+ if (pci_probe & PCI_PROBE_MMCONF) {
+ if (pci_mmcfg_check_hostbridge())
+ known_bridge = 1;
+ else
+ acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
+ __pci_mmcfg_init(1);
+ }
}
void __init pci_mmcfg_late_init(void)
{
- __pci_mmcfg_init(0);
+ /* MMCONFIG disabled */
+ if ((pci_probe & PCI_PROBE_MMCONF) == 0)
+ return;
+
+ if (known_bridge)
+ return;
+
+ /* MMCONFIG hasn't been enabled yet, try again */
+ if (pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF) {
+ acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
+ __pci_mmcfg_init(0);
+ }
}
static int __init pci_mmcfg_late_insert_resources(void)
{
- /*
- * If resources are already inserted or we are not using MMCONFIG,
- * don't insert the resources.
- */
- if ((pci_mmcfg_resources_inserted == 1) ||
- (pci_probe & PCI_PROBE_MMCONF) == 0 ||
- list_empty(&pci_mmcfg_list))
+ struct pci_mmcfg_region *cfg;
+
+ pci_mmcfg_running_state = true;
+
+ /* If we are not using MMCONFIG, don't insert the resources. */
+ if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return 1;
/*
@@ -643,7 +674,9 @@ static int __init pci_mmcfg_late_insert_resources(void)
* marked so it won't cause request errors when __request_region is
* called.
*/
- pci_mmcfg_insert_resources();
+ list_for_each_entry(cfg, &pci_mmcfg_list, list)
+ if (!cfg->res.parent)
+ insert_resource(&iomem_resource, &cfg->res);
return 0;
}
@@ -654,3 +687,100 @@ static int __init pci_mmcfg_late_insert_resources(void)
* with other system resources.
*/
late_initcall(pci_mmcfg_late_insert_resources);
+
+/* Add MMCFG information for host bridges */
+int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
+ phys_addr_t addr)
+{
+ int rc;
+ struct resource *tmp = NULL;
+ struct pci_mmcfg_region *cfg;
+
+ if (!(pci_probe & PCI_PROBE_MMCONF) || pci_mmcfg_arch_init_failed)
+ return -ENODEV;
+
+ if (start > end)
+ return -EINVAL;
+
+ mutex_lock(&pci_mmcfg_lock);
+ cfg = pci_mmconfig_lookup(seg, start);
+ if (cfg) {
+ if (cfg->end_bus < end)
+ dev_info(dev, FW_INFO
+ "MMCONFIG for "
+ "domain %04x [bus %02x-%02x] "
+ "only partially covers this bridge\n",
+ cfg->segment, cfg->start_bus, cfg->end_bus);
+ mutex_unlock(&pci_mmcfg_lock);
+ return -EEXIST;
+ }
+
+ if (!addr) {
+ mutex_unlock(&pci_mmcfg_lock);
+ return -EINVAL;
+ }
+
+ rc = -EBUSY;
+ cfg = pci_mmconfig_alloc(seg, start, end, addr);
+ if (cfg == NULL) {
+ dev_warn(dev, "fail to add MMCONFIG (out of memory)\n");
+ rc = -ENOMEM;
+ } else if (!pci_mmcfg_check_reserved(dev, cfg, 0)) {
+ dev_warn(dev, FW_BUG "MMCONFIG %pR isn't reserved\n",
+ &cfg->res);
+ } else {
+ /* Insert resource if it's not in boot stage */
+ if (pci_mmcfg_running_state)
+ tmp = insert_resource_conflict(&iomem_resource,
+ &cfg->res);
+
+ if (tmp) {
+ dev_warn(dev,
+ "MMCONFIG %pR conflicts with "
+ "%s %pR\n",
+ &cfg->res, tmp->name, tmp);
+ } else if (pci_mmcfg_arch_map(cfg)) {
+ dev_warn(dev, "fail to map MMCONFIG %pR.\n",
+ &cfg->res);
+ } else {
+ list_add_sorted(cfg);
+ dev_info(dev, "MMCONFIG at %pR (base %#lx)\n",
+ &cfg->res, (unsigned long)addr);
+ cfg = NULL;
+ rc = 0;
+ }
+ }
+
+ if (cfg) {
+ if (cfg->res.parent)
+ release_resource(&cfg->res);
+ kfree(cfg);
+ }
+
+ mutex_unlock(&pci_mmcfg_lock);
+
+ return rc;
+}
+
+/* Delete MMCFG information for host bridges */
+int pci_mmconfig_delete(u16 seg, u8 start, u8 end)
+{
+ struct pci_mmcfg_region *cfg;
+
+ mutex_lock(&pci_mmcfg_lock);
+ list_for_each_entry_rcu(cfg, &pci_mmcfg_list, list)
+ if (cfg->segment == seg && cfg->start_bus == start &&
+ cfg->end_bus == end) {
+ list_del_rcu(&cfg->list);
+ synchronize_rcu();
+ pci_mmcfg_arch_unmap(cfg);
+ if (cfg->res.parent)
+ release_resource(&cfg->res);
+ mutex_unlock(&pci_mmcfg_lock);
+ kfree(cfg);
+ return 0;
+ }
+ mutex_unlock(&pci_mmcfg_lock);
+
+ return -ENOENT;
+}
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c
index a3d9c54792a..43984bc1665 100644
--- a/arch/x86/pci/mmconfig_32.c
+++ b/arch/x86/pci/mmconfig_32.c
@@ -11,9 +11,9 @@
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/rcupdate.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
-#include <acpi/acpi.h>
/* Assume systems with more busses have correct MCFG */
#define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
@@ -60,9 +60,12 @@ err: *value = -1;
return -EINVAL;
}
+ rcu_read_lock();
base = get_base_addr(seg, bus, devfn);
- if (!base)
+ if (!base) {
+ rcu_read_unlock();
goto err;
+ }
raw_spin_lock_irqsave(&pci_config_lock, flags);
@@ -80,6 +83,7 @@ err: *value = -1;
break;
}
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+ rcu_read_unlock();
return 0;
}
@@ -93,9 +97,12 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
if ((bus > 255) || (devfn > 255) || (reg > 4095))
return -EINVAL;
+ rcu_read_lock();
base = get_base_addr(seg, bus, devfn);
- if (!base)
+ if (!base) {
+ rcu_read_unlock();
return -EINVAL;
+ }
raw_spin_lock_irqsave(&pci_config_lock, flags);
@@ -113,11 +120,12 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
break;
}
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+ rcu_read_unlock();
return 0;
}
-static struct pci_raw_ops pci_mmcfg = {
+const struct pci_raw_ops pci_mmcfg = {
.read = pci_mmcfg_read,
.write = pci_mmcfg_write,
};
@@ -132,3 +140,18 @@ int __init pci_mmcfg_arch_init(void)
void __init pci_mmcfg_arch_free(void)
{
}
+
+int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg)
+{
+ return 0;
+}
+
+void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg)
+{
+ unsigned long flags;
+
+ /* Invalidate the cached mmcfg map entry. */
+ raw_spin_lock_irqsave(&pci_config_lock, flags);
+ mmcfg_last_accessed_device = 0;
+ raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c
index e783841bd1d..bea52496aea 100644
--- a/arch/x86/pci/mmconfig_64.c
+++ b/arch/x86/pci/mmconfig_64.c
@@ -9,6 +9,7 @@
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/bitmap.h>
+#include <linux/rcupdate.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
@@ -34,9 +35,12 @@ err: *value = -1;
return -EINVAL;
}
+ rcu_read_lock();
addr = pci_dev_base(seg, bus, devfn);
- if (!addr)
+ if (!addr) {
+ rcu_read_unlock();
goto err;
+ }
switch (len) {
case 1:
@@ -49,6 +53,7 @@ err: *value = -1;
*value = mmio_config_readl(addr + reg);
break;
}
+ rcu_read_unlock();
return 0;
}
@@ -62,9 +67,12 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
return -EINVAL;
+ rcu_read_lock();
addr = pci_dev_base(seg, bus, devfn);
- if (!addr)
+ if (!addr) {
+ rcu_read_unlock();
return -EINVAL;
+ }
switch (len) {
case 1:
@@ -77,16 +85,17 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
mmio_config_writel(addr + reg, value);
break;
}
+ rcu_read_unlock();
return 0;
}
-static struct pci_raw_ops pci_mmcfg = {
+const struct pci_raw_ops pci_mmcfg = {
.read = pci_mmcfg_read,
.write = pci_mmcfg_write,
};
-static void __iomem * __init mcfg_ioremap(struct pci_mmcfg_region *cfg)
+static void __iomem *mcfg_ioremap(struct pci_mmcfg_region *cfg)
{
void __iomem *addr;
u64 start, size;
@@ -105,16 +114,14 @@ int __init pci_mmcfg_arch_init(void)
{
struct pci_mmcfg_region *cfg;
- list_for_each_entry(cfg, &pci_mmcfg_list, list) {
- cfg->virt = mcfg_ioremap(cfg);
- if (!cfg->virt) {
- printk(KERN_ERR PREFIX "can't map MMCONFIG at %pR\n",
- &cfg->res);
+ list_for_each_entry(cfg, &pci_mmcfg_list, list)
+ if (pci_mmcfg_arch_map(cfg)) {
pci_mmcfg_arch_free();
return 0;
}
- }
+
raw_pci_ext_ops = &pci_mmcfg;
+
return 1;
}
@@ -122,10 +129,25 @@ void __init pci_mmcfg_arch_free(void)
{
struct pci_mmcfg_region *cfg;
- list_for_each_entry(cfg, &pci_mmcfg_list, list) {
- if (cfg->virt) {
- iounmap(cfg->virt + PCI_MMCFG_BUS_OFFSET(cfg->start_bus));
- cfg->virt = NULL;
- }
+ list_for_each_entry(cfg, &pci_mmcfg_list, list)
+ pci_mmcfg_arch_unmap(cfg);
+}
+
+int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg)
+{
+ cfg->virt = mcfg_ioremap(cfg);
+ if (!cfg->virt) {
+ pr_err(PREFIX "can't map MMCONFIG at %pR\n", &cfg->res);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg)
+{
+ if (cfg && cfg->virt) {
+ iounmap(cfg->virt + PCI_MMCFG_BUS_OFFSET(cfg->start_bus));
+ cfg->virt = NULL;
}
}
diff --git a/arch/x86/pci/numachip.c b/arch/x86/pci/numachip.c
new file mode 100644
index 00000000000..7307d9d12d1
--- /dev/null
+++ b/arch/x86/pci/numachip.c
@@ -0,0 +1,129 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Numascale NumaConnect-specific PCI code
+ *
+ * Copyright (C) 2012 Numascale AS. All rights reserved.
+ *
+ * Send feedback to <support@numascale.com>
+ *
+ * PCI accessor functions derived from mmconfig_64.c
+ *
+ */
+
+#include <linux/pci.h>
+#include <asm/pci_x86.h>
+
+static u8 limit __read_mostly;
+
+static inline char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn)
+{
+ struct pci_mmcfg_region *cfg = pci_mmconfig_lookup(seg, bus);
+
+ if (cfg && cfg->virt)
+ return cfg->virt + (PCI_MMCFG_BUS_OFFSET(bus) | (devfn << 12));
+ return NULL;
+}
+
+static int pci_mmcfg_read_numachip(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 *value)
+{
+ char __iomem *addr;
+
+ /* Why do we have this when nobody checks it. How about a BUG()!? -AK */
+ if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) {
+err: *value = -1;
+ return -EINVAL;
+ }
+
+ /* Ensure AMD Northbridges don't decode reads to other devices */
+ if (unlikely(bus == 0 && devfn >= limit)) {
+ *value = -1;
+ return 0;
+ }
+
+ rcu_read_lock();
+ addr = pci_dev_base(seg, bus, devfn);
+ if (!addr) {
+ rcu_read_unlock();
+ goto err;
+ }
+
+ switch (len) {
+ case 1:
+ *value = mmio_config_readb(addr + reg);
+ break;
+ case 2:
+ *value = mmio_config_readw(addr + reg);
+ break;
+ case 4:
+ *value = mmio_config_readl(addr + reg);
+ break;
+ }
+ rcu_read_unlock();
+
+ return 0;
+}
+
+static int pci_mmcfg_write_numachip(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 value)
+{
+ char __iomem *addr;
+
+ /* Why do we have this when nobody checks it. How about a BUG()!? -AK */
+ if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
+ return -EINVAL;
+
+ /* Ensure AMD Northbridges don't decode writes to other devices */
+ if (unlikely(bus == 0 && devfn >= limit))
+ return 0;
+
+ rcu_read_lock();
+ addr = pci_dev_base(seg, bus, devfn);
+ if (!addr) {
+ rcu_read_unlock();
+ return -EINVAL;
+ }
+
+ switch (len) {
+ case 1:
+ mmio_config_writeb(addr + reg, value);
+ break;
+ case 2:
+ mmio_config_writew(addr + reg, value);
+ break;
+ case 4:
+ mmio_config_writel(addr + reg, value);
+ break;
+ }
+ rcu_read_unlock();
+
+ return 0;
+}
+
+const struct pci_raw_ops pci_mmcfg_numachip = {
+ .read = pci_mmcfg_read_numachip,
+ .write = pci_mmcfg_write_numachip,
+};
+
+int __init pci_numachip_init(void)
+{
+ int ret = 0;
+ u32 val;
+
+ /* For remote I/O, restrict bus 0 access to the actual number of AMD
+ Northbridges, which starts at device number 0x18 */
+ ret = raw_pci_read(0, 0, PCI_DEVFN(0x18, 0), 0x60, sizeof(val), &val);
+ if (ret)
+ goto out;
+
+ /* HyperTransport fabric size in bits 6:4 */
+ limit = PCI_DEVFN(0x18 + ((val >> 4) & 7) + 1, 0);
+
+ /* Use NumaChip PCI accessors for non-extended and extended access */
+ raw_pci_ops = raw_pci_ext_ops = &pci_mmcfg_numachip;
+out:
+ return ret;
+}
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
deleted file mode 100644
index 5c9e2458df4..00000000000
--- a/arch/x86/pci/numaq_32.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * numaq_32.c - Low-level PCI access for NUMA-Q machines
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/nodemask.h>
-#include <asm/apic.h>
-#include <asm/mpspec.h>
-#include <asm/pci_x86.h>
-#include <asm/numaq.h>
-
-#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-
-#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-
-#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-
-#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
- (0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
-
-static void write_cf8(unsigned bus, unsigned devfn, unsigned reg)
-{
- unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg);
- if (xquad_portio)
- writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus)));
- else
- outl(val, 0xCF8);
-}
-
-static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 *value)
-{
- unsigned long flags;
- void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
- if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
- return -EINVAL;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
-
- write_cf8(bus, devfn, reg);
-
- switch (len) {
- case 1:
- if (xquad_portio)
- *value = readb(adr + (reg & 3));
- else
- *value = inb(0xCFC + (reg & 3));
- break;
- case 2:
- if (xquad_portio)
- *value = readw(adr + (reg & 2));
- else
- *value = inw(0xCFC + (reg & 2));
- break;
- case 4:
- if (xquad_portio)
- *value = readl(adr);
- else
- *value = inl(0xCFC);
- break;
- }
-
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
- return 0;
-}
-
-static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
- unsigned int devfn, int reg, int len, u32 value)
-{
- unsigned long flags;
- void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
- if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
- return -EINVAL;
-
- raw_spin_lock_irqsave(&pci_config_lock, flags);
-
- write_cf8(bus, devfn, reg);
-
- switch (len) {
- case 1:
- if (xquad_portio)
- writeb(value, adr + (reg & 3));
- else
- outb((u8)value, 0xCFC + (reg & 3));
- break;
- case 2:
- if (xquad_portio)
- writew(value, adr + (reg & 2));
- else
- outw((u16)value, 0xCFC + (reg & 2));
- break;
- case 4:
- if (xquad_portio)
- writel(value, adr + reg);
- else
- outl((u32)value, 0xCFC);
- break;
- }
-
- raw_spin_unlock_irqrestore(&pci_config_lock, flags);
-
- return 0;
-}
-
-#undef PCI_CONF1_MQ_ADDRESS
-
-static struct pci_raw_ops pci_direct_conf1_mq = {
- .read = pci_conf1_mq_read,
- .write = pci_conf1_mq_write
-};
-
-
-static void __devinit pci_fixup_i450nx(struct pci_dev *d)
-{
- /*
- * i450NX -- Find and scan all secondary buses on all PXB's.
- */
- int pxb, reg;
- u8 busno, suba, subb;
- int quad = BUS2QUAD(d->bus->number);
-
- dev_info(&d->dev, "searching for i450NX host bridges\n");
- reg = 0xd0;
- for(pxb=0; pxb<2; pxb++) {
- pci_read_config_byte(d, reg++, &busno);
- pci_read_config_byte(d, reg++, &suba);
- pci_read_config_byte(d, reg++, &subb);
- dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
- pxb, busno, suba, subb);
- if (busno) {
- /* Bus A */
- pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
- }
- if (suba < subb) {
- /* Bus B */
- pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
- }
- }
- pcibios_last_bus = -1;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
-
-int __init pci_numaq_init(void)
-{
- int quad;
-
- raw_pci_ops = &pci_direct_conf1_mq;
-
- pci_root_bus = pcibios_scan_root(0);
- if (pci_root_bus)
- pci_bus_add_devices(pci_root_bus);
- if (num_online_nodes() > 1)
- for_each_online_node(quad) {
- if (quad == 0)
- continue;
- printk("Scanning PCI bus %d for quad %d\n",
- QUADLOCAL2BUS(quad,0), quad);
- pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
- }
- return 0;
-}
diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
index 13700ec8e2e..7043a4f0e98 100644
--- a/arch/x86/pci/olpc.c
+++ b/arch/x86/pci/olpc.c
@@ -206,6 +206,8 @@ static int pci_olpc_read(unsigned int seg, unsigned int bus,
{
uint32_t *addr;
+ WARN_ON(seg);
+
/* Use the hardware mechanism for non-simulated devices */
if (!is_simulated(bus, devfn))
return pci_direct_conf1.read(seg, bus, devfn, reg, len, value);
@@ -264,6 +266,8 @@ static int pci_olpc_read(unsigned int seg, unsigned int bus,
static int pci_olpc_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, uint32_t value)
{
+ WARN_ON(seg);
+
/* Use the hardware mechanism for non-simulated devices */
if (!is_simulated(bus, devfn))
return pci_direct_conf1.write(seg, bus, devfn, reg, len, value);
@@ -297,7 +301,7 @@ static int pci_olpc_write(unsigned int seg, unsigned int bus,
return 0;
}
-static struct pci_raw_ops pci_olpc_conf = {
+static const struct pci_raw_ops pci_olpc_conf = {
.read = pci_olpc_read,
.write = pci_olpc_write,
};
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index a5f7d0d63de..c77b24a8b2d 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -44,7 +44,7 @@ static inline void set_bios_x(void)
pcibios_enabled = 1;
set_memory_x(PAGE_OFFSET + BIOS_BEGIN, (BIOS_END - BIOS_BEGIN) >> PAGE_SHIFT);
if (__supported_pte_mask & _PAGE_NX)
- printk(KERN_INFO "PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.\n");
+ printk(KERN_INFO "PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n");
}
/*
@@ -124,7 +124,7 @@ static struct {
static int pci_bios_present;
-static int __devinit check_pcibios(void)
+static int check_pcibios(void)
{
u32 signature, eax, ebx, ecx;
u8 status, major_ver, minor_ver, hw_mech;
@@ -181,6 +181,7 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
unsigned long flags;
unsigned long bx = (bus << 8) | devfn;
+ WARN_ON(seg);
if (!value || (bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
@@ -247,6 +248,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
unsigned long flags;
unsigned long bx = (bus << 8) | devfn;
+ WARN_ON(seg);
if ((bus > 255) || (devfn > 255) || (reg > 255))
return -EINVAL;
@@ -301,7 +303,7 @@ static int pci_bios_write(unsigned int seg, unsigned int bus,
* Function table for BIOS32 access
*/
-static struct pci_raw_ops pci_bios_access = {
+static const struct pci_raw_ops pci_bios_access = {
.read = pci_bios_read,
.write = pci_bios_write
};
@@ -310,7 +312,7 @@ static struct pci_raw_ops pci_bios_access = {
* Try to find PCI BIOS.
*/
-static struct pci_raw_ops * __devinit pci_find_bios(void)
+static const struct pci_raw_ops *pci_find_bios(void)
{
union bios32 *check;
unsigned char sum;
diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c
new file mode 100644
index 00000000000..5ceda85b868
--- /dev/null
+++ b/arch/x86/pci/sta2x11-fixup.c
@@ -0,0 +1,364 @@
+/*
+ * arch/x86/pci/sta2x11-fixup.c
+ * glue code for lib/swiotlb.c and DMA translation between STA2x11
+ * AMBA memory mapping and the X86 memory mapping
+ *
+ * ST Microelectronics ConneXt (STA2X11/STA2X10)
+ *
+ * Copyright (c) 2010-2011 Wind River Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/export.h>
+#include <linux/list.h>
+
+#define STA2X11_SWIOTLB_SIZE (4*1024*1024)
+extern int swiotlb_late_init_with_default_size(size_t default_size);
+
+/*
+ * We build a list of bus numbers that are under the ConneXt. The
+ * main bridge hosts 4 busses, which are the 4 endpoints, in order.
+ */
+#define STA2X11_NR_EP 4 /* 0..3 included */
+#define STA2X11_NR_FUNCS 8 /* 0..7 included */
+#define STA2X11_AMBA_SIZE (512 << 20)
+
+struct sta2x11_ahb_regs { /* saved during suspend */
+ u32 base, pexlbase, pexhbase, crw;
+};
+
+struct sta2x11_mapping {
+ u32 amba_base;
+ int is_suspended;
+ struct sta2x11_ahb_regs regs[STA2X11_NR_FUNCS];
+};
+
+struct sta2x11_instance {
+ struct list_head list;
+ int bus0;
+ struct sta2x11_mapping map[STA2X11_NR_EP];
+};
+
+static LIST_HEAD(sta2x11_instance_list);
+
+/* At probe time, record new instances of this bridge (likely one only) */
+static void sta2x11_new_instance(struct pci_dev *pdev)
+{
+ struct sta2x11_instance *instance;
+
+ instance = kzalloc(sizeof(*instance), GFP_ATOMIC);
+ if (!instance)
+ return;
+ /* This has a subordinate bridge, with 4 more-subordinate ones */
+ instance->bus0 = pdev->subordinate->number + 1;
+
+ if (list_empty(&sta2x11_instance_list)) {
+ int size = STA2X11_SWIOTLB_SIZE;
+ /* First instance: register your own swiotlb area */
+ dev_info(&pdev->dev, "Using SWIOTLB (size %i)\n", size);
+ if (swiotlb_late_init_with_default_size(size))
+ dev_emerg(&pdev->dev, "init swiotlb failed\n");
+ }
+ list_add(&instance->list, &sta2x11_instance_list);
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, 0xcc17, sta2x11_new_instance);
+
+/*
+ * Utility functions used in this file from below
+ */
+static struct sta2x11_instance *sta2x11_pdev_to_instance(struct pci_dev *pdev)
+{
+ struct sta2x11_instance *instance;
+ int ep;
+
+ list_for_each_entry(instance, &sta2x11_instance_list, list) {
+ ep = pdev->bus->number - instance->bus0;
+ if (ep >= 0 && ep < STA2X11_NR_EP)
+ return instance;
+ }
+ return NULL;
+}
+
+static int sta2x11_pdev_to_ep(struct pci_dev *pdev)
+{
+ struct sta2x11_instance *instance;
+
+ instance = sta2x11_pdev_to_instance(pdev);
+ if (!instance)
+ return -1;
+
+ return pdev->bus->number - instance->bus0;
+}
+
+static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev)
+{
+ struct sta2x11_instance *instance;
+ int ep;
+
+ instance = sta2x11_pdev_to_instance(pdev);
+ if (!instance)
+ return NULL;
+ ep = sta2x11_pdev_to_ep(pdev);
+ return instance->map + ep;
+}
+
+/* This is exported, as some devices need to access the MFD registers */
+struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev)
+{
+ return sta2x11_pdev_to_instance(pdev);
+}
+EXPORT_SYMBOL(sta2x11_get_instance);
+
+
+/**
+ * p2a - Translate physical address to STA2x11 AMBA address,
+ * used for DMA transfers to STA2x11
+ * @p: Physical address
+ * @pdev: PCI device (must be hosted within the connext)
+ */
+static dma_addr_t p2a(dma_addr_t p, struct pci_dev *pdev)
+{
+ struct sta2x11_mapping *map;
+ dma_addr_t a;
+
+ map = sta2x11_pdev_to_mapping(pdev);
+ a = p + map->amba_base;
+ return a;
+}
+
+/**
+ * a2p - Translate STA2x11 AMBA address to physical address
+ * used for DMA transfers from STA2x11
+ * @a: STA2x11 AMBA address
+ * @pdev: PCI device (must be hosted within the connext)
+ */
+static dma_addr_t a2p(dma_addr_t a, struct pci_dev *pdev)
+{
+ struct sta2x11_mapping *map;
+ dma_addr_t p;
+
+ map = sta2x11_pdev_to_mapping(pdev);
+ p = a - map->amba_base;
+ return p;
+}
+
+/**
+ * sta2x11_swiotlb_alloc_coherent - Allocate swiotlb bounce buffers
+ * returns virtual address. This is the only "special" function here.
+ * @dev: PCI device
+ * @size: Size of the buffer
+ * @dma_handle: DMA address
+ * @flags: memory flags
+ */
+static void *sta2x11_swiotlb_alloc_coherent(struct device *dev,
+ size_t size,
+ dma_addr_t *dma_handle,
+ gfp_t flags,
+ struct dma_attrs *attrs)
+{
+ void *vaddr;
+
+ vaddr = x86_swiotlb_alloc_coherent(dev, size, dma_handle, flags, attrs);
+ *dma_handle = p2a(*dma_handle, to_pci_dev(dev));
+ return vaddr;
+}
+
+/* We have our own dma_ops: the same as swiotlb but from alloc (above) */
+static struct dma_map_ops sta2x11_dma_ops = {
+ .alloc = sta2x11_swiotlb_alloc_coherent,
+ .free = x86_swiotlb_free_coherent,
+ .map_page = swiotlb_map_page,
+ .unmap_page = swiotlb_unmap_page,
+ .map_sg = swiotlb_map_sg_attrs,
+ .unmap_sg = swiotlb_unmap_sg_attrs,
+ .sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+ .sync_single_for_device = swiotlb_sync_single_for_device,
+ .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+ .sync_sg_for_device = swiotlb_sync_sg_for_device,
+ .mapping_error = swiotlb_dma_mapping_error,
+ .dma_supported = NULL, /* FIXME: we should use this instead! */
+};
+
+/* At setup time, we use our own ops if the device is a ConneXt one */
+static void sta2x11_setup_pdev(struct pci_dev *pdev)
+{
+ struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev);
+
+ if (!instance) /* either a sta2x11 bridge or another ST device */
+ return;
+ pci_set_consistent_dma_mask(pdev, STA2X11_AMBA_SIZE - 1);
+ pci_set_dma_mask(pdev, STA2X11_AMBA_SIZE - 1);
+ pdev->dev.archdata.dma_ops = &sta2x11_dma_ops;
+
+ /* We must enable all devices as master, for audio DMA to work */
+ pci_set_master(pdev);
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_setup_pdev);
+
+/*
+ * The following three functions are exported (used in swiotlb: FIXME)
+ */
+/**
+ * dma_capable - Check if device can manage DMA transfers (FIXME: kill it)
+ * @dev: device for a PCI device
+ * @addr: DMA address
+ * @size: DMA size
+ */
+bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+ struct sta2x11_mapping *map;
+
+ if (dev->archdata.dma_ops != &sta2x11_dma_ops) {
+ if (!dev->dma_mask)
+ return false;
+ return addr + size - 1 <= *dev->dma_mask;
+ }
+
+ map = sta2x11_pdev_to_mapping(to_pci_dev(dev));
+
+ if (!map || (addr < map->amba_base))
+ return false;
+ if (addr + size >= map->amba_base + STA2X11_AMBA_SIZE) {
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * phys_to_dma - Return the DMA AMBA address used for this STA2x11 device
+ * @dev: device for a PCI device
+ * @paddr: Physical address
+ */
+dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ if (dev->archdata.dma_ops != &sta2x11_dma_ops)
+ return paddr;
+ return p2a(paddr, to_pci_dev(dev));
+}
+
+/**
+ * dma_to_phys - Return the physical address used for this STA2x11 DMA address
+ * @dev: device for a PCI device
+ * @daddr: STA2x11 AMBA DMA address
+ */
+phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+ if (dev->archdata.dma_ops != &sta2x11_dma_ops)
+ return daddr;
+ return a2p(daddr, to_pci_dev(dev));
+}
+
+
+/*
+ * At boot we must set up the mappings for the pcie-to-amba bridge.
+ * It involves device access, and the same happens at suspend/resume time
+ */
+
+#define AHB_MAPB 0xCA4
+#define AHB_CRW(i) (AHB_MAPB + 0 + (i) * 0x10)
+#define AHB_CRW_SZMASK 0xfffffc00UL
+#define AHB_CRW_ENABLE (1 << 0)
+#define AHB_CRW_WTYPE_MEM (2 << 1)
+#define AHB_CRW_ROE (1UL << 3) /* Relax Order Ena */
+#define AHB_CRW_NSE (1UL << 4) /* No Snoop Enable */
+#define AHB_BASE(i) (AHB_MAPB + 4 + (i) * 0x10)
+#define AHB_PEXLBASE(i) (AHB_MAPB + 8 + (i) * 0x10)
+#define AHB_PEXHBASE(i) (AHB_MAPB + 12 + (i) * 0x10)
+
+/* At probe time, enable mapping for each endpoint, using the pdev */
+static void sta2x11_map_ep(struct pci_dev *pdev)
+{
+ struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);
+ int i;
+
+ if (!map)
+ return;
+ pci_read_config_dword(pdev, AHB_BASE(0), &map->amba_base);
+
+ /* Configure AHB mapping */
+ pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0);
+ pci_write_config_dword(pdev, AHB_PEXHBASE(0), 0);
+ pci_write_config_dword(pdev, AHB_CRW(0), STA2X11_AMBA_SIZE |
+ AHB_CRW_WTYPE_MEM | AHB_CRW_ENABLE);
+
+ /* Disable all the other windows */
+ for (i = 1; i < STA2X11_NR_FUNCS; i++)
+ pci_write_config_dword(pdev, AHB_CRW(i), 0);
+
+ dev_info(&pdev->dev,
+ "sta2x11: Map EP %i: AMBA address %#8x-%#8x\n",
+ sta2x11_pdev_to_ep(pdev), map->amba_base,
+ map->amba_base + STA2X11_AMBA_SIZE - 1);
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_map_ep);
+
+#ifdef CONFIG_PM /* Some register values must be saved and restored */
+
+static void suspend_mapping(struct pci_dev *pdev)
+{
+ struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);
+ int i;
+
+ if (!map)
+ return;
+
+ if (map->is_suspended)
+ return;
+ map->is_suspended = 1;
+
+ /* Save all window configs */
+ for (i = 0; i < STA2X11_NR_FUNCS; i++) {
+ struct sta2x11_ahb_regs *regs = map->regs + i;
+
+ pci_read_config_dword(pdev, AHB_BASE(i), &regs->base);
+ pci_read_config_dword(pdev, AHB_PEXLBASE(i), &regs->pexlbase);
+ pci_read_config_dword(pdev, AHB_PEXHBASE(i), &regs->pexhbase);
+ pci_read_config_dword(pdev, AHB_CRW(i), &regs->crw);
+ }
+}
+DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, suspend_mapping);
+
+static void resume_mapping(struct pci_dev *pdev)
+{
+ struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);
+ int i;
+
+ if (!map)
+ return;
+
+
+ if (!map->is_suspended)
+ goto out;
+ map->is_suspended = 0;
+
+ /* Restore all window configs */
+ for (i = 0; i < STA2X11_NR_FUNCS; i++) {
+ struct sta2x11_ahb_regs *regs = map->regs + i;
+
+ pci_write_config_dword(pdev, AHB_BASE(i), regs->base);
+ pci_write_config_dword(pdev, AHB_PEXLBASE(i), regs->pexlbase);
+ pci_write_config_dword(pdev, AHB_PEXHBASE(i), regs->pexhbase);
+ pci_write_config_dword(pdev, AHB_CRW(i), regs->crw);
+ }
+out:
+ pci_set_master(pdev); /* Like at boot, enable master on all devices */
+}
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, resume_mapping);
+
+#endif /* CONFIG_PM */
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
deleted file mode 100644
index 03008f72eb0..00000000000
--- a/arch/x86/pci/visws.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Low-Level PCI Support for SGI Visual Workstation
- *
- * (c) 1999--2000 Martin Mares <mj@ucw.cz>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/setup.h>
-#include <asm/pci_x86.h>
-#include <asm/visws/cobalt.h>
-#include <asm/visws/lithium.h>
-
-static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
-static void pci_visws_disable_irq(struct pci_dev *dev) { }
-
-/* int (*pcibios_enable_irq)(struct pci_dev *dev) = &pci_visws_enable_irq; */
-/* void (*pcibios_disable_irq)(struct pci_dev *dev) = &pci_visws_disable_irq; */
-
-/* void __init pcibios_penalize_isa_irq(int irq, int active) {} */
-
-
-unsigned int pci_bus0, pci_bus1;
-
-static int __init visws_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq, bus = dev->bus->number;
-
- pin--;
-
- /* Nothing useful at PIIX4 pin 1 */
- if (bus == pci_bus0 && slot == 4 && pin == 0)
- return -1;
-
- /* PIIX4 USB is on Bus 0, Slot 4, Line 3 */
- if (bus == pci_bus0 && slot == 4 && pin == 3) {
- irq = CO_IRQ(CO_APIC_PIIX4_USB);
- goto out;
- }
-
- /* First pin spread down 1 APIC entry per slot */
- if (pin == 0) {
- irq = CO_IRQ((bus == pci_bus0 ? CO_APIC_PCIB_BASE0 :
- CO_APIC_PCIA_BASE0) + slot);
- goto out;
- }
-
- /* lines 1,2,3 from any slot is shared in this twirly pattern */
- if (bus == pci_bus1) {
- /* lines 1-3 from devices 0 1 rotate over 2 apic entries */
- irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((slot + (pin - 1)) % 2));
- } else { /* bus == pci_bus0 */
- /* lines 1-3 from devices 0-3 rotate over 3 apic entries */
- if (slot == 0)
- slot = 3; /* same pattern */
- irq = CO_IRQ(CO_APIC_PCIA_BASE123 + ((3 - slot) + (pin - 1) % 3));
- }
-out:
- printk(KERN_DEBUG "PCI: Bus %d Slot %d Line %d -> IRQ %d\n", bus, slot, pin, irq);
- return irq;
-}
-
-void __init pcibios_update_irq(struct pci_dev *dev, int irq)
-{
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
-int __init pci_visws_init(void)
-{
- pcibios_enable_irq = &pci_visws_enable_irq;
- pcibios_disable_irq = &pci_visws_disable_irq;
-
- /* The VISWS supports configuration access type 1 only */
- pci_probe = (pci_probe | PCI_PROBE_CONF1) &
- ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
-
- pci_bus0 = li_pcib_read16(LI_PCI_BUSNUM) & 0xff;
- pci_bus1 = li_pcia_read16(LI_PCI_BUSNUM) & 0xff;
-
- printk(KERN_INFO "PCI: Lithium bridge A bus: %u, "
- "bridge B (PIIX4) bus: %u\n", pci_bus1, pci_bus0);
-
- raw_pci_ops = &pci_direct_conf1;
- pci_scan_bus_with_sysdata(pci_bus0);
- pci_scan_bus_with_sysdata(pci_bus1);
- pci_fixup_irqs(pci_common_swizzle, visws_map_irq);
- pcibios_resource_survey();
- /* Request bus scan */
- return 1;
-}
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 25cd4a07d09..905956f1646 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -1,8 +1,13 @@
/*
- * Xen PCI Frontend Stub - puts some "dummy" functions in to the Linux
- * x86 PCI core to support the Xen PCI Frontend
+ * Xen PCI - handle PCI (INTx) and MSI infrastructure calls for PV, HVM and
+ * initial domain support. We also handle the DSDT _PRT callbacks for GSI's
+ * used in HVM and initial domain mode (PV does not parse ACPI, so it has no
+ * concept of GSIs). Under PV we hook under the pnbbios API for IRQs and
+ * 0xcf8 PCI configuration read/write.
*
* Author: Ryan Wilson <hap9@epoch.ncsc.mil>
+ * Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+ * Stefano Stabellini <stefano.stabellini@eu.citrix.com>
*/
#include <linux/module.h>
#include <linux/init.h>
@@ -19,21 +24,57 @@
#include <xen/events.h>
#include <asm/xen/pci.h>
+static int xen_pcifront_enable_irq(struct pci_dev *dev)
+{
+ int rc;
+ int share = 1;
+ int pirq;
+ u8 gsi;
+
+ rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
+ if (rc < 0) {
+ dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n",
+ rc);
+ return rc;
+ }
+ /* In PV DomU the Xen PCI backend puts the PIRQ in the interrupt line.*/
+ pirq = gsi;
+
+ if (gsi < NR_IRQS_LEGACY)
+ share = 0;
+
+ rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront");
+ if (rc < 0) {
+ dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n",
+ gsi, pirq, rc);
+ return rc;
+ }
+
+ dev->irq = rc;
+ dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq);
+ return 0;
+}
+
#ifdef CONFIG_ACPI
-static int xen_hvm_register_pirq(u32 gsi, int triggering)
+static int xen_register_pirq(u32 gsi, int gsi_override, int triggering,
+ bool set_pirq)
{
- int rc, irq;
+ int rc, pirq = -1, irq = -1;
struct physdev_map_pirq map_irq;
int shareable = 0;
char *name;
- if (!xen_hvm_domain())
- return -1;
+ irq = xen_irq_from_gsi(gsi);
+ if (irq > 0)
+ return irq;
+
+ if (set_pirq)
+ pirq = gsi;
map_irq.domid = DOMID_SELF;
map_irq.type = MAP_PIRQ_TYPE_GSI;
map_irq.index = gsi;
- map_irq.pirq = -1;
+ map_irq.pirq = pirq;
rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
if (rc) {
@@ -49,19 +90,64 @@ static int xen_hvm_register_pirq(u32 gsi, int triggering)
name = "ioapic-level";
}
- irq = xen_map_pirq_gsi(map_irq.pirq, gsi, shareable, name);
+ if (gsi_override >= 0)
+ gsi = gsi_override;
- printk(KERN_DEBUG "xen: --> irq=%d, pirq=%d\n", irq, map_irq.pirq);
+ irq = xen_bind_pirq_gsi_to_irq(gsi, map_irq.pirq, shareable, name);
+ if (irq < 0)
+ goto out;
+ printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", map_irq.pirq, irq, gsi);
+out:
return irq;
}
static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
+ int trigger, int polarity)
+{
+ if (!xen_hvm_domain())
+ return -1;
+
+ return xen_register_pirq(gsi, -1 /* no GSI override */, trigger,
+ false /* no mapping of GSI to PIRQ */);
+}
+
+#ifdef CONFIG_XEN_DOM0
+static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity)
+{
+ int rc, irq;
+ struct physdev_setup_gsi setup_gsi;
+
+ if (!xen_pv_domain())
+ return -1;
+
+ printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
+ gsi, triggering, polarity);
+
+ irq = xen_register_pirq(gsi, gsi_override, triggering, true);
+
+ setup_gsi.gsi = gsi;
+ setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
+ setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
+ if (rc == -EEXIST)
+ printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
+ else if (rc) {
+ printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
+ gsi, rc);
+ }
+
+ return irq;
+}
+
+static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
int trigger, int polarity)
{
- return xen_hvm_register_pirq(gsi, trigger);
+ return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity);
}
#endif
+#endif
#if defined(CONFIG_PCI_MSI)
#include <linux/msi.h>
@@ -70,6 +156,49 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
struct xen_pci_frontend_ops *xen_pci_frontend;
EXPORT_SYMBOL_GPL(xen_pci_frontend);
+static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+{
+ int irq, ret, i;
+ struct msi_desc *msidesc;
+ int *v;
+
+ if (type == PCI_CAP_ID_MSI && nvec > 1)
+ return 1;
+
+ v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL);
+ if (!v)
+ return -ENOMEM;
+
+ if (type == PCI_CAP_ID_MSIX)
+ ret = xen_pci_frontend_enable_msix(dev, v, nvec);
+ else
+ ret = xen_pci_frontend_enable_msi(dev, v);
+ if (ret)
+ goto error;
+ i = 0;
+ list_for_each_entry(msidesc, &dev->msi_list, list) {
+ irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i],
+ (type == PCI_CAP_ID_MSI) ? nvec : 1,
+ (type == PCI_CAP_ID_MSIX) ?
+ "pcifront-msi-x" :
+ "pcifront-msi",
+ DOMID_SELF);
+ if (irq < 0) {
+ ret = irq;
+ goto free;
+ }
+ i++;
+ }
+ kfree(v);
+ return 0;
+
+error:
+ dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
+free:
+ kfree(v);
+ return ret;
+}
+
#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \
MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))
@@ -91,99 +220,161 @@ static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq,
static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
- int irq, pirq, ret = 0;
+ int irq, pirq;
struct msi_desc *msidesc;
struct msi_msg msg;
+ if (type == PCI_CAP_ID_MSI && nvec > 1)
+ return 1;
+
list_for_each_entry(msidesc, &dev->msi_list, list) {
__read_msi_msg(msidesc, &msg);
pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) |
((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff);
- if (xen_irq_from_pirq(pirq) >= 0 && msg.data == XEN_PIRQ_MSI_DATA) {
- xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ?
- "msi-x" : "msi", &irq, &pirq, XEN_ALLOC_IRQ);
- if (irq < 0)
+ if (msg.data != XEN_PIRQ_MSI_DATA ||
+ xen_irq_from_pirq(pirq) < 0) {
+ pirq = xen_allocate_pirq_msi(dev, msidesc);
+ if (pirq < 0) {
+ irq = -ENODEV;
goto error;
- ret = set_irq_msi(irq, msidesc);
- if (ret < 0)
- goto error_while;
- printk(KERN_DEBUG "xen: msi already setup: msi --> irq=%d"
- " pirq=%d\n", irq, pirq);
- return 0;
+ }
+ xen_msi_compose_msg(dev, pirq, &msg);
+ __write_msi_msg(msidesc, &msg);
+ dev_dbg(&dev->dev, "xen: msi bound to pirq=%d\n", pirq);
+ } else {
+ dev_dbg(&dev->dev,
+ "xen: msi already bound to pirq=%d\n", pirq);
}
- xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ?
- "msi-x" : "msi", &irq, &pirq, (XEN_ALLOC_IRQ | XEN_ALLOC_PIRQ));
- if (irq < 0 || pirq < 0)
+ irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq,
+ (type == PCI_CAP_ID_MSI) ? nvec : 1,
+ (type == PCI_CAP_ID_MSIX) ?
+ "msi-x" : "msi",
+ DOMID_SELF);
+ if (irq < 0)
goto error;
- printk(KERN_DEBUG "xen: msi --> irq=%d, pirq=%d\n", irq, pirq);
- xen_msi_compose_msg(dev, pirq, &msg);
- ret = set_irq_msi(irq, msidesc);
- if (ret < 0)
- goto error_while;
- write_msi_msg(irq, &msg);
+ dev_dbg(&dev->dev,
+ "xen: msi --> pirq=%d --> irq=%d\n", pirq, irq);
}
return 0;
-error_while:
- unbind_from_irqhandler(irq, NULL);
error:
- if (ret == -ENODEV)
- dev_err(&dev->dev, "Xen PCI frontend has not registered" \
- " MSI/MSI-X support!\n");
-
- return ret;
+ dev_err(&dev->dev,
+ "Xen PCI frontend has not registered MSI/MSI-X support!\n");
+ return irq;
}
-/*
- * For MSI interrupts we have to use drivers/xen/event.s functions to
- * allocate an irq_desc and setup the right */
-
+#ifdef CONFIG_XEN_DOM0
+static bool __read_mostly pci_seg_supported = true;
-static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
- int irq, ret, i;
+ int ret = 0;
struct msi_desc *msidesc;
- int *v;
- v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL);
- if (!v)
- return -ENOMEM;
-
- if (type == PCI_CAP_ID_MSIX)
- ret = xen_pci_frontend_enable_msix(dev, &v, nvec);
- else
- ret = xen_pci_frontend_enable_msi(dev, &v);
- if (ret)
- goto error;
- i = 0;
list_for_each_entry(msidesc, &dev->msi_list, list) {
- irq = xen_allocate_pirq(v[i], 0, /* not sharable */
- (type == PCI_CAP_ID_MSIX) ?
- "pcifront-msi-x" : "pcifront-msi");
- if (irq < 0) {
- ret = -1;
- goto free;
+ struct physdev_map_pirq map_irq;
+ domid_t domid;
+
+ domid = ret = xen_find_device_domain_owner(dev);
+ /* N.B. Casting int's -ENODEV to uint16_t results in 0xFFED,
+ * hence check ret value for < 0. */
+ if (ret < 0)
+ domid = DOMID_SELF;
+
+ memset(&map_irq, 0, sizeof(map_irq));
+ map_irq.domid = domid;
+ map_irq.type = MAP_PIRQ_TYPE_MSI_SEG;
+ map_irq.index = -1;
+ map_irq.pirq = -1;
+ map_irq.bus = dev->bus->number |
+ (pci_domain_nr(dev->bus) << 16);
+ map_irq.devfn = dev->devfn;
+
+ if (type == PCI_CAP_ID_MSI && nvec > 1) {
+ map_irq.type = MAP_PIRQ_TYPE_MULTI_MSI;
+ map_irq.entry_nr = nvec;
+ } else if (type == PCI_CAP_ID_MSIX) {
+ int pos;
+ u32 table_offset, bir;
+
+ pos = dev->msix_cap;
+ pci_read_config_dword(dev, pos + PCI_MSIX_TABLE,
+ &table_offset);
+ bir = (u8)(table_offset & PCI_MSIX_TABLE_BIR);
+
+ map_irq.table_base = pci_resource_start(dev, bir);
+ map_irq.entry_nr = msidesc->msi_attrib.entry_nr;
}
- ret = set_irq_msi(irq, msidesc);
- if (ret)
- goto error_while;
- i++;
- }
- kfree(v);
- return 0;
+ ret = -EINVAL;
+ if (pci_seg_supported)
+ ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
+ &map_irq);
+ if (type == PCI_CAP_ID_MSI && nvec > 1 && ret) {
+ /*
+ * If MAP_PIRQ_TYPE_MULTI_MSI is not available
+ * there's nothing else we can do in this case.
+ * Just set ret > 0 so driver can retry with
+ * single MSI.
+ */
+ ret = 1;
+ goto out;
+ }
+ if (ret == -EINVAL && !pci_domain_nr(dev->bus)) {
+ map_irq.type = MAP_PIRQ_TYPE_MSI;
+ map_irq.index = -1;
+ map_irq.pirq = -1;
+ map_irq.bus = dev->bus->number;
+ ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
+ &map_irq);
+ if (ret != -EINVAL)
+ pci_seg_supported = false;
+ }
+ if (ret) {
+ dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n",
+ ret, domid);
+ goto out;
+ }
-error_while:
- unbind_from_irqhandler(irq, NULL);
-error:
- if (ret == -ENODEV)
- dev_err(&dev->dev, "Xen PCI frontend has not registered" \
- " MSI/MSI-X support!\n");
-free:
- kfree(v);
+ ret = xen_bind_pirq_msi_to_irq(dev, msidesc, map_irq.pirq,
+ (type == PCI_CAP_ID_MSI) ? nvec : 1,
+ (type == PCI_CAP_ID_MSIX) ? "msi-x" : "msi",
+ domid);
+ if (ret < 0)
+ goto out;
+ }
+ ret = 0;
+out:
return ret;
}
+static void xen_initdom_restore_msi_irqs(struct pci_dev *dev)
+{
+ int ret = 0;
+
+ if (pci_seg_supported) {
+ struct physdev_pci_device restore_ext;
+
+ restore_ext.seg = pci_domain_nr(dev->bus);
+ restore_ext.bus = dev->bus->number;
+ restore_ext.devfn = dev->devfn;
+ ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi_ext,
+ &restore_ext);
+ if (ret == -ENOSYS)
+ pci_seg_supported = false;
+ WARN(ret && ret != -ENOSYS, "restore_msi_ext -> %d\n", ret);
+ }
+ if (!pci_seg_supported) {
+ struct physdev_restore_msi restore;
+
+ restore.bus = dev->bus->number;
+ restore.devfn = dev->devfn;
+ ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi, &restore);
+ WARN(ret && ret != -ENOSYS, "restore_msi -> %d\n", ret);
+ }
+}
+#endif
+
static void xen_teardown_msi_irqs(struct pci_dev *dev)
{
struct msi_desc *msidesc;
@@ -193,56 +384,24 @@ static void xen_teardown_msi_irqs(struct pci_dev *dev)
xen_pci_frontend_disable_msix(dev);
else
xen_pci_frontend_disable_msi(dev);
+
+ /* Free the IRQ's and the msidesc using the generic code. */
+ default_teardown_msi_irqs(dev);
}
static void xen_teardown_msi_irq(unsigned int irq)
{
xen_destroy_irq(irq);
}
-
-static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
+static u32 xen_nop_msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag)
{
- int irq, ret;
- struct msi_desc *msidesc;
-
- list_for_each_entry(msidesc, &dev->msi_list, list) {
- irq = xen_create_msi_irq(dev, msidesc, type);
- if (irq < 0)
- return -1;
-
- ret = set_irq_msi(irq, msidesc);
- if (ret)
- goto error;
- }
return 0;
-
-error:
- xen_destroy_irq(irq);
- return ret;
}
-#endif
-
-static int xen_pcifront_enable_irq(struct pci_dev *dev)
+static u32 xen_nop_msix_mask_irq(struct msi_desc *desc, u32 flag)
{
- int rc;
- int share = 1;
-
- dev_info(&dev->dev, "Xen PCI enabling IRQ: %d\n", dev->irq);
-
- if (dev->irq < 0)
- return -EINVAL;
-
- if (dev->irq < NR_IRQS_LEGACY)
- share = 0;
-
- rc = xen_allocate_pirq(dev->irq, share, "pcifront");
- if (rc < 0) {
- dev_warn(&dev->dev, "Xen PCI IRQ: %d, failed to register:%d\n",
- dev->irq, rc);
- return rc;
- }
return 0;
}
+#endif
int __init pci_xen_init(void)
{
@@ -265,13 +424,15 @@ int __init pci_xen_init(void)
x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
+ x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
+ x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
#endif
return 0;
}
int __init pci_xen_hvm_init(void)
{
- if (!xen_feature(XENFEAT_hvm_pirqs))
+ if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
return 0;
#ifdef CONFIG_ACPI
@@ -290,79 +451,13 @@ int __init pci_xen_hvm_init(void)
}
#ifdef CONFIG_XEN_DOM0
-static int xen_register_pirq(u32 gsi, int triggering)
-{
- int rc, irq;
- struct physdev_map_pirq map_irq;
- int shareable = 0;
- char *name;
-
- if (!xen_pv_domain())
- return -1;
-
- if (triggering == ACPI_EDGE_SENSITIVE) {
- shareable = 0;
- name = "ioapic-edge";
- } else {
- shareable = 1;
- name = "ioapic-level";
- }
-
- irq = xen_allocate_pirq(gsi, shareable, name);
-
- printk(KERN_DEBUG "xen: --> irq=%d\n", irq);
-
- if (irq < 0)
- goto out;
-
- map_irq.domid = DOMID_SELF;
- map_irq.type = MAP_PIRQ_TYPE_GSI;
- map_irq.index = gsi;
- map_irq.pirq = irq;
-
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
- if (rc) {
- printk(KERN_WARNING "xen map irq failed %d\n", rc);
- return -1;
- }
-
-out:
- return irq;
-}
-
-static int xen_register_gsi(u32 gsi, int triggering, int polarity)
-{
- int rc, irq;
- struct physdev_setup_gsi setup_gsi;
-
- if (!xen_pv_domain())
- return -1;
-
- printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
- gsi, triggering, polarity);
-
- irq = xen_register_pirq(gsi, triggering);
-
- setup_gsi.gsi = gsi;
- setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
- setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
- if (rc == -EEXIST)
- printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
- else if (rc) {
- printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
- gsi, rc);
- }
-
- return irq;
-}
-
static __init void xen_setup_acpi_sci(void)
{
int rc;
int trigger, polarity;
int gsi = acpi_sci_override_gsi;
+ int irq = -1;
+ int gsi_override = -1;
if (!gsi)
return;
@@ -375,55 +470,134 @@ static __init void xen_setup_acpi_sci(void)
}
trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
-
+
printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d "
"polarity=%d\n", gsi, trigger, polarity);
- gsi = xen_register_gsi(gsi, trigger, polarity);
+ /* Before we bind the GSI to a Linux IRQ, check whether
+ * we need to override it with bus_irq (IRQ) value. Usually for
+ * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so:
+ * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
+ * but there are oddballs where the IRQ != GSI:
+ * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
+ * which ends up being: gsi_to_irq[9] == 20
+ * (which is what acpi_gsi_to_irq ends up calling when starting the
+ * the ACPI interpreter and keels over since IRQ 9 has not been
+ * setup as we had setup IRQ 20 for it).
+ */
+ if (acpi_gsi_to_irq(gsi, &irq) == 0) {
+ /* Use the provided value if it's valid. */
+ if (irq >= 0)
+ gsi_override = irq;
+ }
+
+ gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity);
printk(KERN_INFO "xen: acpi sci %d\n", gsi);
return;
}
-static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
- int trigger, int polarity)
+int __init pci_xen_initial_domain(void)
{
- return xen_register_gsi(gsi, trigger, polarity);
-}
+ int irq;
-static int __init pci_xen_initial_domain(void)
-{
#ifdef CONFIG_PCI_MSI
x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
+ x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
+ x86_msi.msi_mask_irq = xen_nop_msi_mask_irq;
+ x86_msi.msix_mask_irq = xen_nop_msix_mask_irq;
#endif
xen_setup_acpi_sci();
__acpi_register_gsi = acpi_register_gsi_xen;
+ /* Pre-allocate legacy irqs */
+ for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
+ int trigger, polarity;
+ if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
+ continue;
+
+ xen_register_pirq(irq, -1 /* no GSI override */,
+ trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE,
+ true /* Map GSI to PIRQ */);
+ }
+ if (0 == nr_ioapics) {
+ for (irq = 0; irq < NR_IRQS_LEGACY; irq++)
+ xen_bind_pirq_gsi_to_irq(irq, irq, 0, "xt-pic");
+ }
return 0;
}
-void __init xen_setup_pirqs(void)
-{
- int irq;
+struct xen_device_domain_owner {
+ domid_t domain;
+ struct pci_dev *dev;
+ struct list_head list;
+};
- pci_xen_initial_domain();
+static DEFINE_SPINLOCK(dev_domain_list_spinlock);
+static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list);
- if (0 == nr_ioapics) {
- for (irq = 0; irq < NR_IRQS_LEGACY; irq++)
- xen_allocate_pirq(irq, 0, "xt-pic");
- return;
+static struct xen_device_domain_owner *find_device(struct pci_dev *dev)
+{
+ struct xen_device_domain_owner *owner;
+
+ list_for_each_entry(owner, &dev_domain_list, list) {
+ if (owner->dev == dev)
+ return owner;
}
+ return NULL;
+}
- /* Pre-allocate legacy irqs */
- for (irq = 0; irq < NR_IRQS_LEGACY; irq++) {
- int trigger, polarity;
+int xen_find_device_domain_owner(struct pci_dev *dev)
+{
+ struct xen_device_domain_owner *owner;
+ int domain = -ENODEV;
+
+ spin_lock(&dev_domain_list_spinlock);
+ owner = find_device(dev);
+ if (owner)
+ domain = owner->domain;
+ spin_unlock(&dev_domain_list_spinlock);
+ return domain;
+}
+EXPORT_SYMBOL_GPL(xen_find_device_domain_owner);
- if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
- continue;
+int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain)
+{
+ struct xen_device_domain_owner *owner;
+
+ owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL);
+ if (!owner)
+ return -ENODEV;
- xen_register_pirq(irq,
- trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE);
+ spin_lock(&dev_domain_list_spinlock);
+ if (find_device(dev)) {
+ spin_unlock(&dev_domain_list_spinlock);
+ kfree(owner);
+ return -EEXIST;
}
+ owner->domain = domain;
+ owner->dev = dev;
+ list_add_tail(&owner->list, &dev_domain_list);
+ spin_unlock(&dev_domain_list_spinlock);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xen_register_device_domain_owner);
+
+int xen_unregister_device_domain_owner(struct pci_dev *dev)
+{
+ struct xen_device_domain_owner *owner;
+
+ spin_lock(&dev_domain_list_spinlock);
+ owner = find_device(dev);
+ if (!owner) {
+ spin_unlock(&dev_domain_list_spinlock);
+ return -ENODEV;
+ }
+ list_del(&owner->list);
+ spin_unlock(&dev_domain_list_spinlock);
+ kfree(owner);
+ return 0;
}
+EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner);
#endif
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-11-09 21:00:16 +0000