diff options
Diffstat (limited to 'arch/x86/pci/common.c')
| -rw-r--r-- | arch/x86/pci/common.c | 150 |
1 files changed, 32 insertions, 118 deletions
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index ccd0ab3ab89..059a76c2973 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -6,6 +6,7 @@ #include <linux/sched.h> #include <linux/pci.h> +#include <linux/pci-acpi.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/dmi.h> @@ -34,7 +35,6 @@ int noioapicreroute = 1; #endif int pcibios_last_bus = -1; unsigned long pirq_table_addr; -struct pci_bus *pci_root_bus; const struct pci_raw_ops *__read_mostly raw_pci_ops; const struct pci_raw_ops *__read_mostly raw_pci_ext_ops; @@ -171,6 +171,16 @@ void pcibios_fixup_bus(struct pci_bus *b) pcibios_fixup_device_resources(dev); } +void pcibios_add_bus(struct pci_bus *bus) +{ + acpi_pci_add_bus(bus); +} + +void pcibios_remove_bus(struct pci_bus *bus) +{ + acpi_pci_remove_bus(bus); +} + /* * Only use DMI information to set this if nothing was passed * on the kernel command line (which was parsed earlier). @@ -446,19 +456,25 @@ void __init dmi_check_pciprobe(void) dmi_check_system(pciprobe_dmi_table); } -struct pci_bus *pcibios_scan_root(int busnum) +void pcibios_scan_root(int busnum) { - struct pci_bus *bus = NULL; + struct pci_bus *bus; + struct pci_sysdata *sd; + LIST_HEAD(resources); - while ((bus = pci_find_next_bus(bus)) != NULL) { - if (bus->number == busnum) { - /* Already scanned */ - return bus; - } + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { + printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum); + return; + } + sd->node = x86_pci_root_bus_node(busnum); + x86_pci_root_bus_resources(busnum, &resources); + printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); + bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources); + if (!bus) { + pci_free_resource_list(&resources); + kfree(sd); } - - return pci_scan_bus_on_node(busnum, &pci_root_ops, - get_mp_bus_to_node(busnum)); } void __init pcibios_set_cache_line_size(void) @@ -551,7 +567,6 @@ char * __init pcibios_setup(char *str) pci_probe |= PCI_PROBE_NOEARLY; return NULL; } -#ifndef CONFIG_X86_VISWS else if (!strcmp(str, "usepirqmask")) { pci_probe |= PCI_USE_PIRQ_MASK; return NULL; @@ -561,9 +576,7 @@ char * __init pcibios_setup(char *str) } else if (!strncmp(str, "lastbus=", 8)) { pcibios_last_bus = simple_strtol(str+8, NULL, 0); return NULL; - } -#endif - else if (!strcmp(str, "rom")) { + } else if (!strcmp(str, "rom")) { pci_probe |= PCI_ASSIGN_ROMS; return NULL; } else if (!strcmp(str, "norom")) { @@ -618,7 +631,9 @@ int pcibios_add_device(struct pci_dev *dev) pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = phys_to_virt(pa_data); + data = ioremap(pa_data, sizeof(*rom)); + if (!data) + return -ENOMEM; if (data->type == SETUP_PCI) { rom = (struct pci_setup_rom *)data; @@ -635,6 +650,7 @@ int pcibios_add_device(struct pci_dev *dev) } } pa_data = data->next; + iounmap(data); } return 0; } @@ -664,105 +680,3 @@ int pci_ext_cfg_avail(void) else return 0; } - -struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node) -{ - LIST_HEAD(resources); - struct pci_bus *bus = NULL; - struct pci_sysdata *sd; - - /* - * Allocate per-root-bus (not per bus) arch-specific data. - * TODO: leak; this memory is never freed. - * It's arguable whether it's worth the trouble to care. - */ - sd = kzalloc(sizeof(*sd), GFP_KERNEL); - if (!sd) { - printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno); - return NULL; - } - sd->node = node; - x86_pci_root_bus_resources(busno, &resources); - printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busno); - bus = pci_scan_root_bus(NULL, busno, ops, sd, &resources); - if (!bus) { - pci_free_resource_list(&resources); - kfree(sd); - } - - return bus; -} - -struct pci_bus *pci_scan_bus_with_sysdata(int busno) -{ - return pci_scan_bus_on_node(busno, &pci_root_ops, -1); -} - -/* - * NUMA info for PCI busses - * - * Early arch code is responsible for filling in reasonable values here. - * A node id of "-1" means "use current node". In other words, if a bus - * has a -1 node id, it's not tightly coupled to any particular chunk - * of memory (as is the case on some Nehalem systems). - */ -#ifdef CONFIG_NUMA - -#define BUS_NR 256 - -#ifdef CONFIG_X86_64 - -static int mp_bus_to_node[BUS_NR] = { - [0 ... BUS_NR - 1] = -1 -}; - -void set_mp_bus_to_node(int busnum, int node) -{ - if (busnum >= 0 && busnum < BUS_NR) - mp_bus_to_node[busnum] = node; -} - -int get_mp_bus_to_node(int busnum) -{ - int node = -1; - - if (busnum < 0 || busnum > (BUS_NR - 1)) - return node; - - node = mp_bus_to_node[busnum]; - - /* - * let numa_node_id to decide it later in dma_alloc_pages - * if there is no ram on that node - */ - if (node != -1 && !node_online(node)) - node = -1; - - return node; -} - -#else /* CONFIG_X86_32 */ - -static int mp_bus_to_node[BUS_NR] = { - [0 ... BUS_NR - 1] = -1 -}; - -void set_mp_bus_to_node(int busnum, int node) -{ - if (busnum >= 0 && busnum < BUS_NR) - mp_bus_to_node[busnum] = (unsigned char) node; -} - -int get_mp_bus_to_node(int busnum) -{ - int node; - - if (busnum < 0 || busnum > (BUS_NR - 1)) - return 0; - node = mp_bus_to_node[busnum]; - return node; -} - -#endif /* CONFIG_X86_32 */ - -#endif /* CONFIG_NUMA */ |