diff options
Diffstat (limited to 'arch/x86/kernel')
30 files changed, 484 insertions, 650 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 832cb838cb4..4ba419b668a 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -31,8 +31,8 @@ GCOV_PROFILE_paravirt.o := n obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o -obj-y += time_$(BITS).o ioport.o ldt.o dumpstack.o -obj-y += setup.o i8259.o irqinit.o +obj-y += time.o ioport.o ldt.o dumpstack.o +obj-y += setup.o x86_init.o i8259.o irqinit.o obj-$(CONFIG_X86_VISWS) += visws_quirks.o obj-$(CONFIG_X86_32) += probe_roms_32.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o @@ -105,6 +105,7 @@ obj-$(CONFIG_SCx200) += scx200.o scx200-y += scx200_32.o obj-$(CONFIG_OLPC) += olpc.o +obj-$(CONFIG_X86_MRST) += mrst.o microcode-y := microcode_core.o microcode-$(CONFIG_MICROCODE_INTEL) += microcode_intel.o diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 159740decc4..a34601f5298 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -36,6 +36,7 @@ #include <linux/mm.h> #include <asm/perf_counter.h> +#include <asm/x86_init.h> #include <asm/pgalloc.h> #include <asm/atomic.h> #include <asm/mpspec.h> @@ -1709,7 +1710,7 @@ int __init APIC_init_uniprocessor(void) localise_nmi_watchdog(); #endif - setup_boot_clock(); + x86_init.timers.setup_percpu_clockev(); #ifdef CONFIG_X86_64 check_nmi_watchdog(); #endif diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c index 676cdac385c..77a06413b6b 100644 --- a/arch/x86/kernel/apic/bigsmp_32.c +++ b/arch/x86/kernel/apic/bigsmp_32.c @@ -112,7 +112,7 @@ static physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map) return physids_promote(0xFFL); } -static int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid) +static int bigsmp_check_phys_apicid_present(int phys_apicid) { return 1; } diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 3c8f9e75d03..809e1cf86d6 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -96,6 +96,11 @@ struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; +/* Number of legacy interrupts */ +static int nr_legacy_irqs __read_mostly = NR_IRQS_LEGACY; +/* GSI interrupts */ +static int nr_irqs_gsi = NR_IRQS_LEGACY; + #if defined (CONFIG_MCA) || defined (CONFIG_EISA) int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif @@ -173,6 +178,12 @@ static struct irq_cfg irq_cfgx[NR_IRQS] = { [15] = { .vector = IRQ15_VECTOR, }, }; +void __init io_apic_disable_legacy(void) +{ + nr_legacy_irqs = 0; + nr_irqs_gsi = 0; +} + int __init arch_early_irq_init(void) { struct irq_cfg *cfg; @@ -190,7 +201,7 @@ int __init arch_early_irq_init(void) desc->chip_data = &cfg[i]; zalloc_cpumask_var_node(&cfg[i].domain, GFP_NOWAIT, node); zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_NOWAIT, node); - if (i < NR_IRQS_LEGACY) + if (i < nr_legacy_irqs) cpumask_setall(cfg[i].domain); } @@ -867,7 +878,7 @@ static int __init find_isa_irq_apic(int irq, int type) */ static int EISA_ELCR(unsigned int irq) { - if (irq < NR_IRQS_LEGACY) { + if (irq < nr_legacy_irqs) { unsigned int port = 0x4d0 + (irq >> 3); return (inb(port) >> (irq & 7)) & 1; } @@ -1464,7 +1475,7 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq } ioapic_register_intr(irq, desc, trigger); - if (irq < NR_IRQS_LEGACY) + if (irq < nr_legacy_irqs) disable_8259A_irq(irq); ioapic_write_entry(apic_id, pin, entry); @@ -1831,7 +1842,7 @@ __apicdebuginit(void) print_PIC(void) unsigned int v; unsigned long flags; - if (apic_verbosity == APIC_QUIET) + if (apic_verbosity == APIC_QUIET || !nr_legacy_irqs) return; printk(KERN_DEBUG "\nprinting PIC contents\n"); @@ -1894,6 +1905,10 @@ void __init enable_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); nr_ioapic_registers[apic] = reg_01.bits.entries+1; } + + if (!nr_legacy_irqs) + return; + for(apic = 0; apic < nr_ioapics; apic++) { int pin; /* See if any of the pins is in ExtINT mode */ @@ -1948,6 +1963,9 @@ void disable_IO_APIC(void) */ clear_IO_APIC(); + if (!nr_legacy_irqs) + return; + /* * If the i8259 is routed through an IOAPIC * Put that IOAPIC in virtual wire mode @@ -1994,7 +2012,7 @@ void disable_IO_APIC(void) * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 */ -static void __init setup_ioapic_ids_from_mpc(void) +void __init setup_ioapic_ids_from_mpc(void) { union IO_APIC_reg_00 reg_00; physid_mask_t phys_id_present_map; @@ -2003,9 +2021,8 @@ static void __init setup_ioapic_ids_from_mpc(void) unsigned char old_id; unsigned long flags; - if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids()) + if (acpi_ioapic) return; - /* * Don't check I/O APIC IDs for xAPIC systems. They have * no meaning without the serial APIC bus. @@ -2179,7 +2196,7 @@ static unsigned int startup_ioapic_irq(unsigned int irq) struct irq_cfg *cfg; spin_lock_irqsave(&ioapic_lock, flags); - if (irq < NR_IRQS_LEGACY) { + if (irq < nr_legacy_irqs) { disable_8259A_irq(irq); if (i8259A_irq_pending(irq)) was_pending = 1; @@ -2657,7 +2674,7 @@ static inline void init_IO_APIC_traps(void) * so default to an old-fashioned 8259 * interrupt if we can.. */ - if (irq < NR_IRQS_LEGACY) + if (irq < nr_legacy_irqs) make_8259A_irq(irq); else /* Strange. Oh, well.. */ @@ -2993,7 +3010,7 @@ out: * the I/O APIC in all cases now. No actual device should request * it anyway. --macro */ -#define PIC_IRQS (1 << PIC_CASCADE_IR) +#define PIC_IRQS (1UL << PIC_CASCADE_IR) void __init setup_IO_APIC(void) { @@ -3001,21 +3018,19 @@ void __init setup_IO_APIC(void) /* * calling enable_IO_APIC() is moved to setup_local_APIC for BP */ - - io_apic_irqs = ~PIC_IRQS; + io_apic_irqs = nr_legacy_irqs ? ~PIC_IRQS : ~0UL; apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); /* * Set up IO-APIC IRQ routing. */ -#ifdef CONFIG_X86_32 - if (!acpi_ioapic) - setup_ioapic_ids_from_mpc(); -#endif + x86_init.mpparse.setup_ioapic_ids(); + sync_Arb_IDs(); setup_IO_APIC_irqs(); init_IO_APIC_traps(); - check_timer(); + if (nr_legacy_irqs) + check_timer(); } /* @@ -3116,7 +3131,6 @@ static int __init ioapic_init_sysfs(void) device_initcall(ioapic_init_sysfs); -static int nr_irqs_gsi = NR_IRQS_LEGACY; /* * Dynamic irq allocate and deallocation */ @@ -3856,7 +3870,7 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq, /* * IRQs < 16 are already in the irq_2_pin[] map */ - if (irq >= NR_IRQS_LEGACY) { + if (irq >= nr_legacy_irqs) { cfg = desc->chip_data; if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) { printk(KERN_INFO "can not add pin %d for irq %d\n", diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index ca96e68f0d2..efa00e2b850 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -66,7 +66,6 @@ struct mpc_trans { unsigned short trans_reserved; }; -/* x86_quirks member */ static int mpc_record; static struct mpc_trans *translation_table[MAX_MPC_ENTRY]; @@ -130,10 +129,9 @@ void __cpuinit numaq_tsc_disable(void) } } -static int __init numaq_pre_time_init(void) +static void __init numaq_tsc_init(void) { numaq_tsc_disable(); - return 0; } static inline int generate_logical_apicid(int quad, int phys_apicid) @@ -177,6 +175,19 @@ static void mpc_oem_pci_bus(struct mpc_bus *m) quad_local_to_mp_bus_id[quad][local] = m->busid; } +/* + * Called from mpparse code. + * mode = 0: prescan + * mode = 1: one mpc entry scanned + */ +static void numaq_mpc_record(unsigned int mode) +{ + if (!mode) + mpc_record = 0; + else + mpc_record++; +} + static void __init MP_translation_info(struct mpc_trans *m) { printk(KERN_INFO @@ -206,9 +217,9 @@ static int __init mpf_checksum(unsigned char *mp, int len) /* * Read/parse the MPC oem tables */ -static void __init - smp_read_mpc_oem(struct mpc_oemtable *oemtable, unsigned short oemsize) +static void __init smp_read_mpc_oem(struct mpc_table *mpc) { + struct mpc_oemtable *oemtable = (void *)(long)mpc->oemptr; int count = sizeof(*oemtable); /* the header size */ unsigned char *oemptr = ((unsigned char *)oemtable) + count; @@ -250,29 +261,6 @@ static void __init } } -static int __init numaq_setup_ioapic_ids(void) -{ - /* so can skip it */ - return 1; -} - -static struct x86_quirks numaq_x86_quirks __initdata = { - .arch_pre_time_init = numaq_pre_time_init, - .arch_time_init = NULL, - .arch_pre_intr_init = NULL, - .arch_memory_setup = NULL, - .arch_intr_init = NULL, - .arch_trap_init = NULL, - .mach_get_smp_config = NULL, - .mach_find_smp_config = NULL, - .mpc_record = &mpc_record, - .mpc_apic_id = mpc_apic_id, - .mpc_oem_bus_info = mpc_oem_bus_info, - .mpc_oem_pci_bus = mpc_oem_pci_bus, - .smp_read_mpc_oem = smp_read_mpc_oem, - .setup_ioapic_ids = numaq_setup_ioapic_ids, -}; - static __init void early_check_numaq(void) { /* @@ -286,8 +274,15 @@ static __init void early_check_numaq(void) if (smp_found_config) early_get_smp_config(); - if (found_numaq) - x86_quirks = &numaq_x86_quirks; + if (found_numaq) { + x86_init.mpparse.mpc_record = numaq_mpc_record; + x86_init.mpparse.setup_ioapic_ids = x86_init_noop; + x86_init.mpparse.mpc_apic_id = mpc_apic_id; + x86_init.mpparse.smp_read_mpc_oem = smp_read_mpc_oem; + x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus; + x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info; + x86_init.timers.tsc_pre_init = numaq_tsc_init; + } } int __init get_memcfg_numaq(void) @@ -418,7 +413,7 @@ static inline physid_mask_t numaq_apicid_to_cpu_present(int logical_apicid) /* Where the IO area was mapped on multiquad, always 0 otherwise */ void *xquad_portio; -static inline int numaq_check_phys_apicid_present(int boot_cpu_physical_apicid) +static inline int numaq_check_phys_apicid_present(int phys_apicid) { return 1; } diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c index eafdfbd1ea9..645ecc4ff0b 100644 --- a/arch/x86/kernel/apic/summit_32.c +++ b/arch/x86/kernel/apic/summit_32.c @@ -272,7 +272,7 @@ static physid_mask_t summit_apicid_to_cpu_present(int apicid) return physid_mask_of_physid(0); } -static int summit_check_phys_apicid_present(int boot_cpu_physical_apicid) +static int summit_check_phys_apicid_present(int physical_apicid) { return 1; } diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c index 93ba8eeb100..08be922de33 100644 --- a/arch/x86/kernel/cpu/hypervisor.c +++ b/arch/x86/kernel/cpu/hypervisor.c @@ -34,13 +34,6 @@ detect_hypervisor_vendor(struct cpuinfo_x86 *c) c->x86_hyper_vendor = X86_HYPER_VENDOR_NONE; } -unsigned long get_hypervisor_tsc_freq(void) -{ - if (boot_cpu_data.x86_hyper_vendor == X86_HYPER_VENDOR_VMWARE) - return vmware_get_tsc_khz(); - return 0; -} - static inline void __cpuinit hypervisor_set_feature_bits(struct cpuinfo_x86 *c) { @@ -55,3 +48,10 @@ void __cpuinit init_hypervisor(struct cpuinfo_x86 *c) detect_hypervisor_vendor(c); hypervisor_set_feature_bits(c); } + +void __init init_hypervisor_platform(void) +{ + init_hypervisor(&boot_cpu_data); + if (boot_cpu_data.x86_hyper_vendor == X86_HYPER_VENDOR_VMWARE) + vmware_platform_setup(); +} diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c index bc24f514ec9..0a46b4df5d8 100644 --- a/arch/x86/kernel/cpu/vmware.c +++ b/arch/x86/kernel/cpu/vmware.c @@ -24,6 +24,7 @@ #include <linux/dmi.h> #include <asm/div64.h> #include <asm/vmware.h> +#include <asm/x86_init.h> #define CPUID_VMWARE_INFO_LEAF 0x40000000 #define VMWARE_HYPERVISOR_MAGIC 0x564D5868 @@ -47,21 +48,29 @@ static inline int __vmware_platform(void) return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC; } -static unsigned long __vmware_get_tsc_khz(void) +static unsigned long vmware_get_tsc_khz(void) { uint64_t tsc_hz; uint32_t eax, ebx, ecx, edx; VMWARE_PORT(GETHZ, eax, ebx, ecx, edx); - if (ebx == UINT_MAX) - return 0; tsc_hz = eax | (((uint64_t)ebx) << 32); do_div(tsc_hz, 1000); BUG_ON(tsc_hz >> 32); return tsc_hz; } +void __init vmware_platform_setup(void) +{ + uint32_t eax, ebx, ecx, edx; + + VMWARE_PORT(GETHZ, eax, ebx, ecx, edx); + + if (ebx != UINT_MAX) + x86_platform.calibrate_tsc = vmware_get_tsc_khz; +} + /* * While checking the dmi string infomation, just checking the product * serial key should be enough, as this will always have a VMware @@ -87,12 +96,6 @@ int vmware_platform(void) return 0; } -unsigned long vmware_get_tsc_khz(void) -{ - BUG_ON(!vmware_platform()); - return __vmware_get_tsc_khz(); -} - /* * VMware hypervisor takes care of exporting a reliable TSC to the guest. * Still, due to timing difference when running on virtual cpus, the TSC can diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 147005a1cc3..a3210ce1ecc 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1455,28 +1455,11 @@ char *__init default_machine_specific_memory_setup(void) return who; } -char *__init __attribute__((weak)) machine_specific_memory_setup(void) -{ - if (x86_quirks->arch_memory_setup) { - char *who = x86_quirks->arch_memory_setup(); - - if (who) - return who; - } - return default_machine_specific_memory_setup(); -} - -/* Overridden in paravirt.c if CONFIG_PARAVIRT */ -char * __init __attribute__((weak)) memory_setup(void) -{ - return machine_specific_memory_setup(); -} - void __init setup_memory_map(void) { char *who; - who = memory_setup(); + who = x86_init.resources.memory_setup(); memcpy(&e820_saved, &e820, sizeof(struct e820map)); printk(KERN_INFO "BIOS-provided physical RAM map:\n"); e820_print_map(who); diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index fe26ba3e345..ad5bd988fb7 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -42,6 +42,7 @@ #include <asm/time.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> +#include <asm/x86_init.h> #define EFI_DEBUG 1 #define PFX "EFI: " @@ -453,6 +454,9 @@ void __init efi_init(void) if (add_efi_memmap) do_add_efi_memmap(); + x86_platform.get_wallclock = efi_get_time; + x86_platform.set_wallclock = efi_set_rtc_mmss; + /* Setup for EFI runtime service */ reboot_type = BOOT_EFI; diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 3f8579f8d42..4f8e2507e8f 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -11,8 +11,21 @@ #include <asm/setup.h> #include <asm/sections.h> #include <asm/e820.h> -#include <asm/bios_ebda.h> +#include <asm/page.h> #include <asm/trampoline.h> +#include <asm/apic.h> +#include <asm/io_apic.h> +#include <asm/bios_ebda.h> + +static void __init i386_default_early_setup(void) +{ + /* Initilize 32bit specific setup functions */ + x86_init.resources.probe_roms = probe_roms; + x86_init.resources.reserve_resources = i386_reserve_resources; + x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc; + + reserve_ebda_region(); +} void __init i386_start_kernel(void) { @@ -29,7 +42,16 @@ void __init i386_start_kernel(void) reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); } #endif - reserve_ebda_region(); + + /* Call the subarch specific early setup function */ + switch (boot_params.hdr.hardware_subarch) { + case X86_SUBARCH_MRST: + x86_mrst_early_setup(); + break; + default: + i386_default_early_setup(); + break; + } /* * At this point everything still needed from the boot loader diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 70eaa852c73..0b06cd778fd 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -23,8 +23,8 @@ #include <asm/sections.h> #include <asm/kdebug.h> #include <asm/e820.h> -#include <asm/bios_ebda.h> #include <asm/trampoline.h> +#include <asm/bios_ebda.h> static void __init zap_identity_mappings(void) { diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 7ffec6b3b33..b766e8c7252 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -157,6 +157,7 @@ subarch_entries: .long default_entry /* normal x86/PC */ .long lguest_entry /* lguest hypervisor */ .long xen_entry /* Xen hypervisor */ + .long default_entry /* Moorestown MID */ num_subarch_entries = (. - subarch_entries) / 4 .previous #endif /* CONFIG_PARAVIRT */ diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index ccf8ab54f31..300883112e3 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -116,7 +116,7 @@ int vector_used_by_percpu_irq(unsigned int vector) return 0; } -static void __init init_ISA_irqs(void) +void __init init_ISA_irqs(void) { int i; @@ -140,8 +140,10 @@ static void __init init_ISA_irqs(void) } } -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); +void __init init_IRQ(void) +{ + x86_init.irqs.intr_init(); +} static void __init smp_intr_init(void) { @@ -213,32 +215,12 @@ static void __init apic_intr_init(void) #endif } -/** - * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors - * - * Description: - * Perform any necessary interrupt initialisation prior to setting up - * the "ordinary" interrupt call gates. For legacy reasons, the ISA - * interrupts should be initialised here if the machine emulates a PC - * in any way. - **/ -static void __init x86_quirk_pre_intr_init(void) -{ -#ifdef CONFIG_X86_32 - if (x86_quirks->arch_pre_intr_init) { - if (x86_quirks->arch_pre_intr_init()) - return; - } -#endif - init_ISA_irqs(); -} - void __init native_init_IRQ(void) { int i; /* Execute any quirks before the call gates are initialised: */ - x86_quirk_pre_intr_init(); + x86_init.irqs.pre_vector_init(); apic_intr_init(); @@ -258,12 +240,6 @@ void __init native_init_IRQ(void) #ifdef CONFIG_X86_32 /* - * Call quirks after call gates are initialised (usually add in - * the architecture specific gates): - */ - x86_quirk_intr_init(); - - /* * External FPU? Set up irq13 if so, for * original braindamaged IBM FERR coupling. */ diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index e5efcdcca31..feaeb0d3aa4 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -22,6 +22,8 @@ #include <asm/msr.h> #include <asm/apic.h> #include <linux/percpu.h> + +#include <asm/x86_init.h> #include <asm/reboot.h> #define KVM_SCALE 22 @@ -182,12 +184,13 @@ void __init kvmclock_init(void) if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) { if (kvm_register_clock("boot clock")) return; - pv_time_ops.get_wallclock = kvm_get_wallclock; - pv_time_ops.set_wallclock = kvm_set_wallclock; pv_time_ops.sched_clock = kvm_clock_read; - pv_time_ops.get_tsc_khz = kvm_get_tsc_khz; + x86_platform.calibrate_tsc = kvm_get_tsc_khz; + x86_platform.get_wallclock = kvm_get_wallclock; + x86_platform.set_wallclock = kvm_set_wallclock; #ifdef CONFIG_X86_LOCAL_APIC - pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock; + x86_cpuinit.setup_percpu_clockev = + kvm_setup_secondary_clock; #endif #ifdef CONFIG_SMP smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu; diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index fcd513bf284..5be95ef4ffe 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -45,6 +45,11 @@ static int __init mpf_checksum(unsigned char *mp, int len) return sum & 0xFF; } +int __init default_mpc_apic_id(struct mpc_cpu *m) +{ + return m->apicid; +} + static void __init MP_processor_info(struct mpc_cpu *m) { int apicid; @@ -55,10 +60,7 @@ static void __init MP_processor_info(struct mpc_cpu *m) return; } - if (x86_quirks->mpc_apic_id) - apicid = x86_quirks->mpc_apic_id(m); - else - apicid = m->apicid; + apicid = x86_init.mpparse.mpc_apic_id(m); if (m->cpuflag & CPU_BOOTPROCESSOR) { bootup_cpu = " (Bootup-CPU)"; @@ -70,16 +72,18 @@ static void __init MP_processor_info(struct mpc_cpu *m) } #ifdef CONFIG_X86_IO_APIC -static void __init MP_bus_info(struct mpc_bus *m) +void __init default_mpc_oem_bus_info(struct mpc_bus *m, char *str) { - char str[7]; memcpy(str, m->bustype, 6); str[6] = 0; + apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str); +} - if (x86_quirks->mpc_oem_bus_info) - x86_quirks->mpc_oem_bus_info(m, str); - else - apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str); +static void __init MP_bus_info(struct mpc_bus *m) +{ + char str[7]; + + x86_init.mpparse.mpc_oem_bus_info(m, str); #if MAX_MP_BUSSES < 256 if (m->busid >= MAX_MP_BUSSES) { @@ -96,8 +100,8 @@ static void __init MP_bus_info(struct mpc_bus *m) mp_bus_id_to_type[m->busid] = MP_BUS_ISA; #endif } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) { - if (x86_quirks->mpc_oem_pci_bus) - x86_quirks->mpc_oem_pci_bus(m); + if (x86_init.mpparse.mpc_oem_pci_bus) + x86_init.mpparse.mpc_oem_pci_bus(m); clear_bit(m->busid, mp_bus_not_pci); #if defined(CONFIG_EISA) || defined(CONFIG_MCA) @@ -291,6 +295,8 @@ static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt) 1, mpc, mpc->length, 1); } +void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { } + static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) { char str[16]; @@ -312,16 +318,13 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) if (early) return 1; - if (mpc->oemptr && x86_quirks->smp_read_mpc_oem) { - struct mpc_oemtable *oem_table = (void *)(long)mpc->oemptr; - x86_quirks->smp_read_mpc_oem(oem_table, mpc->oemsize); - } + if (mpc->oemptr) + x86_init.mpparse.smp_read_mpc_oem(mpc); /* * Now process the configuration blocks. */ - if (x86_quirks->mpc_record) - *x86_quirks->mpc_record = 0; + x86_init.mpparse.mpc_record(0); while (count < mpc->length) { switch (*mpt) { @@ -353,8 +356,7 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) count = mpc->length; break; } - if (x86_quirks->mpc_record) - (*x86_quirks->mpc_record)++; + x86_init.mpparse.mpc_record(1); } #ifdef CONFIG_X86_BIGSMP @@ -608,7 +610,7 @@ static int __init check_physptr(struct mpf_intel *mpf, unsigned int early) /* * Scan the memory blocks for an SMP configuration block. */ -static void __init __get_smp_config(unsigned int early) +void __init default_get_smp_config(unsigned int early) { struct mpf_intel *mpf = mpf_found; @@ -625,11 +627,6 @@ static void __init __get_smp_config(unsigned int early) if (acpi_lapic && acpi_ioapic) return; - if (x86_quirks->mach_get_smp_config) { - if (x86_quirks->mach_get_smp_config(early)) - return; - } - printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->specification); #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) @@ -670,16 +667,6 @@ static void __init __get_smp_config(unsigned int early) */ } -void __init early_get_smp_config(void) -{ - __get_smp_config(1); -} - -void __init get_smp_config(void) -{ - __get_smp_config(0); -} - static void __init smp_reserve_bootmem(struct mpf_intel *mpf) { unsigned long size = get_mpc_size(mpf->physptr); @@ -745,14 +732,10 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, return 0; } -static void __init __find_smp_config(unsigned int reserve) +void __init default_find_smp_config(unsigned int reserve) { unsigned int address; - if (x86_quirks->mach_find_smp_config) { - if (x86_quirks->mach_find_smp_config(reserve)) - return; - } /* * FIXME: Linux assumes you have 640K of base ram.. * this continues the error... @@ -787,16 +770,6 @@ static void __init __find_smp_config(unsigned int reserve) smp_scan_config(address, 0x400, reserve); } -void __init early_find_smp_config(void) -{ - __find_smp_config(0); -} - -void __init find_smp_config(void) -{ - __find_smp_config(1); -} - #ifdef CONFIG_X86_IO_APIC static u8 __initdata irq_used[MAX_IRQ_SOURCES]; diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c new file mode 100644 index 00000000000..3b7078abc87 --- /dev/null +++ b/arch/x86/kernel/mrst.c @@ -0,0 +1,24 @@ +/* + * mrst.c: Intel Moorestown platform specific setup code + * + * (C) Copyright 2008 Intel Corporation + * Author: Jacob Pan (jacob.jun.pan@intel.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#include <linux/init.h> + +#include <asm/setup.h> + +/* + * Moorestown specific x86_init function overrides and early setup + * calls. + */ +void __init x86_mrst_early_setup(void) +{ + x86_init.resources.probe_roms = x86_init_noop; + x86_init.resources.reserve_resources = x86_init_noop; +} diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index f5b0b4a01fb..1b1739d1631 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -54,17 +54,12 @@ u64 _paravirt_ident_64(u64 x) return x; } -static void __init default_banner(void) +void __init default_banner(void) { printk(KERN_INFO "Booting paravirtualized kernel on %s\n", pv_info.name); } -char *memory_setup(void) -{ - return pv_init_ops.memory_setup(); -} - /* Simple instruction patching code. */ #define DEF_NATIVE(ops, name, code) \ extern const char start_##ops##_##name[], end_##ops##_##name[]; \ @@ -188,11 +183,6 @@ unsigned paravirt_patch_insns(void *insnbuf, unsigned len, return insn_len; } -void init_IRQ(void) -{ - pv_irq_ops.init_IRQ(); -} - static void native_flush_tlb(void) { __native_flush_tlb(); @@ -218,13 +208,6 @@ extern void native_irq_enable_sysexit(void); extern void native_usergs_sysret32(void); extern void native_usergs_sysret64(void); -static int __init print_banner(void) -{ - pv_init_ops.banner(); - return 0; -} -core_initcall(print_banner); - static struct resource reserve_ioports = { .start = 0, .end = IO_SPACE_LIMIT, @@ -320,21 +303,13 @@ struct pv_info pv_info = { struct pv_init_ops pv_init_ops = { .patch = native_patch, - .banner = default_banner, - .arch_setup = paravirt_nop, - .memory_setup = machine_specific_memory_setup, }; struct pv_time_ops pv_time_ops = { - .time_init = hpet_time_init, - .get_wallclock = native_get_wallclock, - .set_wallclock = native_set_wallclock, .sched_clock = native_sched_clock, - .get_tsc_khz = native_calibrate_tsc, }; struct pv_irq_ops pv_irq_ops = { - .init_IRQ = native_init_IRQ, .save_fl = __PV_IS_CALLEE_SAVE(native_save_fl), .restore_fl = __PV_IS_CALLEE_SAVE(native_restore_fl), .irq_disable = __PV_IS_CALLEE_SAVE(native_irq_disable), @@ -409,8 +384,6 @@ struct pv_cpu_ops pv_cpu_ops = { struct pv_apic_ops pv_apic_ops = { #ifdef CONFIG_X86_LOCAL_APIC - .setup_boot_clock = setup_boot_APIC_clock, - .setup_secondary_clock = setup_secondary_APIC_clock, .startup_ipi_hook = paravirt_nop, #endif }; @@ -424,13 +397,6 @@ struct pv_apic_ops pv_apic_ops = { #endif struct pv_mmu_ops pv_mmu_ops = { -#ifndef CONFIG_X86_64 - .pagetable_setup_start = native_pagetable_setup_start, - .pagetable_setup_done = native_pagetable_setup_done, -#else - .pagetable_setup_start = paravirt_nop, - .pagetable_setup_done = paravirt_nop, -#endif .read_cr2 = native_read_cr2, .write_cr2 = native_write_cr2, diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index bf67dcb4a44..1cfbbfc3ae2 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -8,6 +8,7 @@ #include <linux/pnp.h> #include <asm/vsyscall.h> +#include <asm/x86_init.h> #include <asm/time.h> #ifdef CONFIG_X86_32 @@ -165,13 +166,13 @@ void rtc_cmos_write(unsigned char val, unsigned char addr) } EXPORT_SYMBOL(rtc_cmos_write); -static int set_rtc_mmss(unsigned long nowtime) +int update_persistent_clock(struct timespec now) { unsigned long flags; int retval; spin_lock_irqsave(&rtc_lock, flags); - retval = set_wallclock(nowtime); + retval = x86_platform.set_wallclock(now.tv_sec); spin_unlock_irqrestore(&rtc_lock, flags); return retval; @@ -183,18 +184,13 @@ void read_persistent_clock(struct timespec *ts) unsigned long retval, flags; spin_lock_irqsave(&rtc_lock, flags); - retval = get_wallclock(); + retval = x86_platform.get_wallclock(); spin_unlock_irqrestore(&rtc_lock, flags); ts->tv_sec = retval; ts->tv_nsec = 0; } -int update_persistent_clock(struct timespec now) -{ - return set_rtc_mmss(now.tv_sec); -} - unsigned long long native_read_tsc(void) { return __native_read_tsc(); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 19f15c4076f..a55f6609fe1 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -109,10 +109,6 @@ #include <asm/numa_64.h> #endif -#ifndef ARCH_SETUP -#define ARCH_SETUP -#endif - /* * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries. * The direct mapping extends to max_pfn_mapped, so that we can directly access @@ -134,9 +130,9 @@ int default_cpu_present_to_apicid(int mps_cpu) return __default_cpu_present_to_apicid(mps_cpu); } -int default_check_phys_apicid_present(int boot_cpu_physical_apicid) +int default_check_phys_apicid_present(int phys_apicid) { - return __default_check_phys_apicid_present(boot_cpu_physical_apicid); + return __default_check_phys_apicid_present(phys_apicid); } #endif @@ -172,13 +168,6 @@ static struct resource bss_resource = { #ifdef CONFIG_X86_32 -static struct resource video_ram_resource = { - .name = "Video RAM area", - .start = 0xa0000, - .end = 0xbffff, - .flags = IORESOURCE_BUSY | IORESOURCE_MEM -}; - /* cpu data as detected by the assembly code in head.S */ struct cpuinfo_x86 new_cpu_data __cpuinitdata = {0, 0, 0, 0, -1, 1, 0, 0, -1}; /* common cpu data for all cpus */ @@ -606,7 +595,7 @@ static struct resource standard_io_resources[] = { .flags = IORESOURCE_BUSY | IORESOURCE_IO } }; -static void __init reserve_standard_io_resources(void) +void __init reserve_standard_io_resources(void) { int i; @@ -638,10 +627,6 @@ static int __init setup_elfcorehdr(char *arg) early_param("elfcorehdr", setup_elfcorehdr); #endif -static struct x86_quirks default_x86_quirks __initdata; - -struct x86_quirks *x86_quirks __initdata = &default_x86_quirks; - #ifdef CONFIG_X86_RESERVE_LOW_64K static int __init dmi_low_memory_corruption(const struct dmi_system_id *d) { @@ -773,7 +758,7 @@ void __init setup_arch(char **cmdline_p) } #endif - ARCH_SETUP + x86_init.oem.arch_setup(); setup_memory_map(); parse_setup_data(); @@ -844,11 +829,9 @@ void __init setup_arch(char **cmdline_p) * VMware detection requires dmi to be available, so this * needs to be done after dmi_scan_machine, for the BP. */ - init_hypervisor(&boot_cpu_data); + init_hypervisor_platform(); -#ifdef CONFIG_X86_32 - probe_roms(); -#endif + x86_init.resources.probe_roms(); /* after parse_early_param, so could debug it */ insert_resource(&iomem_resource, &code_resource); @@ -983,10 +966,9 @@ void __init setup_arch(char **cmdline_p) kvmclock_init(); #endif - paravirt_pagetable_setup_start(swapper_pg_dir); + x86_init.paging.pagetable_setup_start(swapper_pg_dir); paging_init(); - paravirt_pagetable_setup_done(swapper_pg_dir); - paravirt_post_allocator_init(); + x86_init.paging.pagetable_setup_done(swapper_pg_dir); tboot_probe(); @@ -1003,13 +985,11 @@ void __init setup_arch(char **cmdline_p) */ acpi_boot_init(); -#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS) /* * get boot-time SMP configuration: */ if (smp_found_config) get_smp_config(); -#endif prefill_possible_map(); @@ -1028,10 +1008,7 @@ void __init setup_arch(char **cmdline_p) e820_reserve_resources(); e820_mark_nosave_regions(max_low_pfn); -#ifdef CONFIG_X86_32 - request_resource(&iomem_resource, &video_ram_resource); -#endif - reserve_standard_io_resources(); + x86_init.resources.reserve_resources(); e820_setup_gap(); @@ -1043,78 +1020,22 @@ void __init setup_arch(char **cmdline_p) conswitchp = &dummy_con; #endif #endif + x86_init.oem.banner(); } #ifdef CONFIG_X86_32 -/** - * x86_quirk_intr_init - post gate setup interrupt initialisation - * - * Description: - * Fill in any interrupts that may have been left out by the general - * init_IRQ() routine. interrupts having to do with the machine rather - * than the devices on the I/O bus (like APIC interrupts in intel MP - * systems) are started here. - **/ -void __init x86_quirk_intr_init(void) -{ - if (x86_quirks->arch_intr_init) { - if (x86_quirks->arch_intr_init()) - return; - } -} - -/** - * x86_quirk_trap_init - initialise system specific traps - * - * Description: - * Called as the final act of trap_init(). Used in VISWS to initialise - * the various board specific APIC traps. - **/ -void __init x86_quirk_trap_init(void) -{ - if (x86_quirks->arch_trap_init) { - if (x86_quirks->arch_trap_init()) - return; - } -} - -static struct irqaction irq0 = { - .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER, - .name = "timer" +static struct resource video_ram_resource = { + .name = "Video RAM area", + .start = 0xa0000, + .end = 0xbffff, + .flags = IORESOURCE_BUSY | IORESOURCE_MEM }; -/** - * x86_quirk_pre_time_init - do any specific initialisations before. - * - **/ -void __init x86_quirk_pre_time_init(void) +void __init i386_reserve_resources(void) { - if (x86_quirks->arch_pre_time_init) - x86_quirks->arch_pre_time_init(); + request_resource(&iomem_resource, &video_ram_resource); + reserve_standard_io_resources(); } -/** - * x86_quirk_time_init - do any specific initialisations for the system timer. - * - * Description: - * Must plug the system timer interrupt source at HZ into the IRQ listed - * in irq_vectors.h:TIMER_IRQ - **/ -void __init x86_quirk_time_init(void) -{ - if (x86_quirks->arch_time_init) { - /* - * A nonzero return code does not mean failure, it means - * that the architecture quirk does not want any - * generic (timer) setup to be performed after this: - */ - if (x86_quirks->arch_time_init()) - return; - } - - irq0.mask = cpumask_of_cpu(0); - setup_irq(0, &irq0); -} #endif /* CONFIG_X86_32 */ diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index a25eeec0008..09c5e077dff 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -324,7 +324,7 @@ notrace static void __cpuinit start_secondary(void *unused) /* enable local interrupts */ local_irq_enable(); - setup_secondary_clock(); + x86_cpuinit.setup_percpu_clockev(); wmb(); cpu_idle(); @@ -1114,7 +1114,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) printk(KERN_INFO "CPU%d: ", 0); print_cpu_info(&cpu_data(0)); - setup_boot_clock(); + x86_init.timers.setup_percpu_clockev(); if (is_uv_system()) uv_system_init(); diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c new file mode 100644 index 00000000000..e293ac56c72 --- /dev/null +++ b/arch/x86/kernel/time.c @@ -0,0 +1,121 @@ +/* + * Copyright (c) 1991,1992,1995 Linus Torvalds + * Copyright (c) 1994 Alan Modra + * Copyright (c) 1995 Markus Kuhn + * Copyright (c) 1996 Ingo Molnar + * Copyright (c) 1998 Andrea Arcangeli + * Copyright (c) 2002,2006 Vojtech Pavlik + * Copyright (c) 2003 Andi Kleen + * + */ + +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/mca.h> + +#include <asm/vsyscall.h> +#include <asm/x86_init.h> +#include <asm/i8259.h> +#include <asm/i8253.h> +#include <asm/timer.h> +#include <asm/hpet.h> +#include <asm/time.h> + +#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC) +int timer_ack; +#endif + +#ifdef CONFIG_X86_64 +volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; +#endif + +unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + + if (!user_mode_vm(regs) && in_lock_functions(pc)) { +#ifdef CONFIG_FRAME_POINTER + return *(unsigned long *)(regs->bp + sizeof(long)); +#else + unsigned long *sp = (unsigned long *)regs->sp; + /* + * Return address is either directly at stack pointer + * or above a saved flags. Eflags has bits 22-31 zero, + * kernel addresses don't. + */ + if (sp[0] >> 22) + return sp[0]; + if (sp[1] >> 22) + return sp[1]; +#endif + } + return pc; +} +EXPORT_SYMBOL(profile_pc); + +/* + * Default timer interrupt handler for PIT/HPET + */ +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + /* Keep nmi watchdog up to date */ + inc_irq_stat(irq0_irqs); + + /* Optimized out for !IO_APIC and x86_64 */ + if (timer_ack) { + /* + * Subtle, when I/O APICs are used we have to ack timer IRQ + * manually to deassert NMI lines for the watchdog if run + * on an 82489DX-based system. + */ + spin_lock(&i8259A_lock); + outb(0x0c, PIC_MASTER_OCW3); + /* Ack the IRQ; AEOI will end it automatically. */ + inb(PIC_MASTER_POLL); + spin_unlock(&i8259A_lock); + } + + global_clock_event->event_handler(global_clock_event); + + /* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */ + if (MCA_bus) + outb_p(inb_p(0x61)| 0x80, 0x61); + + return IRQ_HANDLED; +} + +static struct irqaction irq0 = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL | IRQF_TIMER, + .name = "timer" +}; + +void __init setup_default_timer_irq(void) +{ + irq0.mask = cpumask_of_cpu(0); + setup_irq(0, &irq0); +} + +/* Default timer init function */ +void __init hpet_time_init(void) +{ + if (!hpet_enable()) + setup_pit_timer(); + setup_default_timer_irq(); +} + +static __init void x86_late_time_init(void) +{ + x86_init.timers.timer_init(); + tsc_init(); +} + +/* + * Initialize TSC and delay the periodic timer init to + * late x86_late_time_init() so ioremap works. + */ +void __init time_init(void) +{ + late_time_init = x86_late_time_init; +} diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c deleted file mode 100644 index 5c5d87f0b2e..00000000000 --- a/arch/x86/kernel/time_32.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * Copyright (C) 1991, 1992, 1995 Linus Torvalds - * - * This file contains the PC-specific time handling details: - * reading the RTC at bootup, etc.. - * 1994-07-02 Alan Modra - * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime - * 1995-03-26 Markus Kuhn - * fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887 - * precision CMOS clock update - * 1996-05-03 Ingo Molnar - * fixed time warps in do_[slow|fast]_gettimeoffset() - * 1997-09-10 Updated NTP code according to technical memorandum Jan '96 - * "A Kernel Model for Precision Timekeeping" by Dave Mills - * 1998-09-05 (Various) - * More robust do_fast_gettimeoffset() algorithm implemented - * (works with APM, Cyrix 6x86MX and Centaur C6), - * monotonic gettimeofday() with fast_get_timeoffset(), - * drift-proof precision TSC calibration on boot - * (C. Scott Ananian <cananian@alumni.princeton.edu>, Andrew D. - * Balsa <andrebalsa@altern.org>, Philip Gladstone <philip@raptor.com>; - * ported from 2.0.35 Jumbo-9 by Michael Krause <m.krause@tu-harburg.de>). - * 1998-12-16 Andrea Arcangeli - * Fixed Jumbo-9 code in 2.1.131: do_gettimeofday was missing 1 jiffy - * because was not accounting lost_ticks. - * 1998-12-24 Copyright (C) 1998 Andrea Arcangeli - * Fixed a xtime SMP race (we need the xtime_lock rw spinlock to - * serialize accesses to xtime/lost_ticks). - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/time.h> -#include <linux/mca.h> - -#include <asm/setup.h> -#include <asm/hpet.h> -#include <asm/time.h> -#include <asm/timer.h> - -#include <asm/do_timer.h> - -int timer_ack; - -unsigned long profile_pc(struct pt_regs *regs) -{ - unsigned long pc = instruction_pointer(regs); - -#ifdef CONFIG_SMP - if (!user_mode_vm(regs) && in_lock_functions(pc)) { -#ifdef CONFIG_FRAME_POINTER - return *(unsigned long *)(regs->bp + sizeof(long)); -#else - unsigned long *sp = (unsigned long *)®s->sp; - - /* Return address is either directly at stack pointer - or above a saved flags. Eflags has bits 22-31 zero, - kernel addresses don't. */ - if (sp[0] >> 22) - return sp[0]; - if (sp[1] >> 22) - return sp[1]; -#endif - } -#endif - return pc; -} -EXPORT_SYMBOL(profile_pc); - -/* - * This is the same as the above, except we _also_ save the current - * Time Stamp Counter value at the time of the timer interrupt, so that - * we later on can estimate the time of day more exactly. - */ -irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - /* Keep nmi watchdog up to date */ - inc_irq_stat(irq0_irqs); - -#ifdef CONFIG_X86_IO_APIC - if (timer_ack) { - /* - * Subtle, when I/O APICs are used we have to ack timer IRQ - * manually to deassert NMI lines for the watchdog if run - * on an 82489DX-based system. - */ - spin_lock(&i8259A_lock); - outb(0x0c, PIC_MASTER_OCW3); - /* Ack the IRQ; AEOI will end it automatically. */ - inb(PIC_MASTER_POLL); - spin_unlock(&i8259A_lock); - } -#endif - - do_timer_interrupt_hook(); - -#ifdef CONFIG_MCA - if (MCA_bus) { - /* The PS/2 uses level-triggered interrupts. You can't - turn them off, nor would you want to (any attempt to - enable edge-triggered interrupts usually gets intercepted by a - special hardware circuit). Hence we have to acknowledge - the timer interrupt. Through some incredibly stupid - design idea, the reset for IRQ 0 is done by setting the - high bit of the PPI port B (0x61). Note that some PS/2s, - notably the 55SX, work fine if this is removed. */ - - u8 irq_v = inb_p(0x61); /* read the current state */ - outb_p(irq_v | 0x80, 0x61); /* reset the IRQ */ - } -#endif - - return IRQ_HANDLED; -} - -/* Duplicate of time_init() below, with hpet_enable part added */ -void __init hpet_time_init(void) -{ - if (!hpet_enable()) - setup_pit_timer(); - x86_quirk_time_init(); -} - -/* - * This is called directly from init code; we must delay timer setup in the - * HPET case as we can't make the decision to turn on HPET this early in the - * boot process. - * - * The chosen time_init function will usually be hpet_time_init, above, but - * in the case of virtual hardware, an alternative function may be substituted. - */ -void __init time_init(void) -{ - x86_quirk_pre_time_init(); - tsc_init(); - late_time_init = choose_time_init(); -} diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c deleted file mode 100644 index 5ba343e6184..00000000000 --- a/arch/x86/kernel/time_64.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * "High Precision Event Timer" based timekeeping. - * - * Copyright (c) 1991,1992,1995 Linus Torvalds - * Copyright (c) 1994 Alan Modra - * Copyright (c) 1995 Markus Kuhn - * Copyright (c) 1996 Ingo Molnar - * Copyright (c) 1998 Andrea Arcangeli - * Copyright (c) 2002,2006 Vojtech Pavlik - * Copyright (c) 2003 Andi Kleen - * RTC support code taken from arch/i386/kernel/timers/time_hpet.c - */ - -#include <linux/clockchips.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/time.h> -#include <linux/mca.h> -#include <linux/nmi.h> - -#include <asm/i8253.h> -#include <asm/hpet.h> -#include <asm/vgtod.h> -#include <asm/time.h> -#include <asm/timer.h> - -volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; - -unsigned long profile_pc(struct pt_regs *regs) -{ - unsigned long pc = instruction_pointer(regs); - - /* Assume the lock function has either no stack frame or a copy - of flags from PUSHF - Eflags always has bits 22 and up cleared unlike kernel addresses. */ - if (!user_mode_vm(regs) && in_lock_functions(pc)) { -#ifdef CONFIG_FRAME_POINTER - return *(unsigned long *)(regs->bp + sizeof(long)); -#else - unsigned long *sp = (unsigned long *)regs->sp; - if (sp[0] >> 22) - return sp[0]; - if (sp[1] >> 22) - return sp[1]; -#endif - } - return pc; -} -EXPORT_SYMBOL(profile_pc); - -static irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - inc_irq_stat(irq0_irqs); - - global_clock_event->event_handler(global_clock_event); - -#ifdef CONFIG_MCA - if (MCA_bus) { - u8 irq_v = inb_p(0x61); /* read the current state */ - outb_p(irq_v|0x80, 0x61); /* reset the IRQ */ - } -#endif - - return IRQ_HANDLED; -} - -/* calibrate_cpu is used on systems with fixed rate TSCs to determine - * processor frequency */ -#define TICK_COUNT 100000000 -unsigned long __init calibrate_cpu(void) -{ - int tsc_start, tsc_now; - int i, no_ctr_free; - unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0; - unsigned long flags; - - for (i = 0; i < 4; i++) - if (avail_to_resrv_perfctr_nmi_bit(i)) - break; - no_ctr_free = (i == 4); - if (no_ctr_free) { - WARN(1, KERN_WARNING "Warning: AMD perfctrs busy ... " - "cpu_khz value may be incorrect.\n"); - i = 3; - rdmsrl(MSR_K7_EVNTSEL3, evntsel3); - wrmsrl(MSR_K7_EVNTSEL3, 0); - rdmsrl(MSR_K7_PERFCTR3, pmc3); - } else { - reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i); - reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i); - } - local_irq_save(flags); - /* start measuring cycles, incrementing from 0 */ - wrmsrl(MSR_K7_PERFCTR0 + i, 0); - wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76); - rdtscl(tsc_start); - do { - rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now); - tsc_now = get_cycles(); - } while ((tsc_now - tsc_start) < TICK_COUNT); - - local_irq_restore(flags); - if (no_ctr_free) { - wrmsrl(MSR_K7_EVNTSEL3, 0); - wrmsrl(MSR_K7_PERFCTR3, pmc3); - wrmsrl(MSR_K7_EVNTSEL3, evntsel3); - } else { - release_perfctr_nmi(MSR_K7_PERFCTR0 + i); - release_evntsel_nmi(MSR_K7_EVNTSEL0 + i); - } - - return pmc_now * tsc_khz / (tsc_now - tsc_start); -} - -static struct irqaction irq0 = { - .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_IRQPOLL | IRQF_NOBALANCING | IRQF_TIMER, - .name = "timer" -}; - -void __init hpet_time_init(void) -{ - if (!hpet_enable()) - setup_pit_timer(); - - setup_irq(0, &irq0); -} - -void __init time_init(void) -{ - tsc_init(); - - late_time_init = choose_time_init(); -} diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 83264922a87..7dc0de9d1ed 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -59,6 +59,7 @@ #include <asm/mach_traps.h> #ifdef CONFIG_X86_64 +#include <asm/x86_init.h> #include <asm/pgalloc.h> #include <asm/proto.h> #else @@ -972,7 +973,5 @@ void __init trap_init(void) */ cpu_init(); -#ifdef CONFIG_X86_32 - x86_quirk_trap_init(); -#endif + x86_init.irqs.trap_init(); } diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index fc3672a303d..17409e8d109 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -17,6 +17,8 @@ #include <asm/time.h> #include <asm/delay.h> #include <asm/hypervisor.h> +#include <asm/nmi.h> +#include <asm/x86_init.h> unsigned int __read_mostly cpu_khz; /* TSC clocks / usec, not used here */ EXPORT_SYMBOL(cpu_khz); @@ -400,15 +402,9 @@ unsigned long native_calibrate_tsc(void) { u64 tsc1, tsc2, delta, ref1, ref2; unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX; - unsigned long flags, latch, ms, fast_calibrate, hv_tsc_khz; + unsigned long flags, latch, ms, fast_calibrate; int hpet = is_hpet_enabled(), i, loopmin; - hv_tsc_khz = get_hypervisor_tsc_freq(); - if (hv_tsc_khz) { - printk(KERN_INFO "TSC: Frequency read from the hypervisor\n"); - return hv_tsc_khz; - } - local_irq_save(flags); fast_calibrate = quick_pit_calibrate(); local_irq_restore(flags); @@ -566,7 +562,7 @@ int recalibrate_cpu_khz(void) unsigned long cpu_khz_old = cpu_khz; if (cpu_has_tsc) { - tsc_khz = calibrate_tsc(); + tsc_khz = x86_platform.calibrate_tsc(); cpu_khz = tsc_khz; cpu_data(0).loops_per_jiffy = cpufreq_scale(cpu_data(0).loops_per_jiffy, @@ -860,15 +856,71 @@ static void __init init_tsc_clocksource(void) clocksource_register(&clocksource_tsc); } +#ifdef CONFIG_X86_64 +/* + * calibrate_cpu is used on systems with fixed rate TSCs to determine + * processor frequency + */ +#define TICK_COUNT 100000000 +static unsigned long __init calibrate_cpu(void) +{ + int tsc_start, tsc_now; + int i, no_ctr_free; + unsigned long evntsel3 = 0, pmc3 = 0, pmc_now = 0; + unsigned long flags; + + for (i = 0; i < 4; i++) + if (avail_to_resrv_perfctr_nmi_bit(i)) + break; + no_ctr_free = (i == 4); + if (no_ctr_free) { + WARN(1, KERN_WARNING "Warning: AMD perfctrs busy ... " + "cpu_khz value may be incorrect.\n"); + i = 3; + rdmsrl(MSR_K7_EVNTSEL3, evntsel3); + wrmsrl(MSR_K7_EVNTSEL3, 0); + rdmsrl(MSR_K7_PERFCTR3, pmc3); + } else { + reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i); + reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i); + } + local_irq_save(flags); + /* start measuring cycles, incrementing from 0 */ + wrmsrl(MSR_K7_PERFCTR0 + i, 0); + wrmsrl(MSR_K7_EVNTSEL0 + i, 1 << 22 | 3 << 16 | 0x76); + rdtscl(tsc_start); + do { + rdmsrl(MSR_K7_PERFCTR0 + i, pmc_now); + tsc_now = get_cycles(); + } while ((tsc_now - tsc_start) < TICK_COUNT); + + local_irq_restore(flags); + if (no_ctr_free) { + wrmsrl(MSR_K7_EVNTSEL3, 0); + wrmsrl(MSR_K7_PERFCTR3, pmc3); + wrmsrl(MSR_K7_EVNTSEL3, evntsel3); + } else { + release_perfctr_nmi(MSR_K7_PERFCTR0 + i); + release_evntsel_nmi(MSR_K7_EVNTSEL0 + i); + } + + return pmc_now * tsc_khz / (tsc_now - tsc_start); +} +#else +static inline unsigned long calibrate_cpu(void) { return cpu_khz; } +#endif + void __init tsc_init(void) { u64 lpj; int cpu; + x86_init.timers.tsc_pre_init(); + if (!cpu_has_tsc) return; - tsc_khz = calibrate_tsc(); + tsc_khz = x86_platform.calibrate_tsc(); cpu_khz = tsc_khz; if (!tsc_khz) { @@ -876,11 +928,9 @@ void __init tsc_init(void) return; } -#ifdef CONFIG_X86_64 if (cpu_has(&boot_cpu_data, X86_FEATURE_CONSTANT_TSC) && (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)) cpu_khz = calibrate_cpu(); -#endif printk("Detected %lu.%03lu MHz processor.\n", (unsigned long)cpu_khz / 1000, diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c index 31ffc24eec4..f068553a1b1 100644 --- a/arch/x86/kernel/visws_quirks.c +++ b/arch/x86/kernel/visws_quirks.c @@ -30,6 +30,7 @@ #include <asm/setup.h> #include <asm/apic.h> #include <asm/e820.h> +#include <asm/time.h> #include <asm/io.h> #include <linux/kernel_stat.h> @@ -53,7 +54,7 @@ int is_visws_box(void) return visws_board_type >= 0; } -static int __init visws_time_init(void) +static void __init visws_time_init(void) { printk(KERN_INFO "Starting Cobalt Timer system clock\n"); @@ -66,21 +67,13 @@ static int __init visws_time_init(void) /* Enable (unmask) the timer interrupt */ co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK); - /* - * Zero return means the generic timer setup code will set up - * the standard vector: - */ - return 0; + setup_default_timer_irq(); } -static int __init visws_pre_intr_init(void) +/* Replaces the default init_ISA_irqs in the generic setup */ +static void __init visws_pre_intr_init(void) { init_VISWS_APIC_irqs(); - - /* - * We dont want ISA irqs to be set up by the generic code: - */ - return 1; } /* Quirk for machine specific memory setup. */ @@ -156,12 +149,8 @@ static void visws_machine_power_off(void) outl(PIIX_SPECIAL_STOP, 0xCFC); } -static int __init visws_get_smp_config(unsigned int early) +static void __init visws_get_smp_config(unsigned int early) { - /* - * Prevent MP-table parsing by the generic code: - */ - return 1; } /* @@ -208,7 +197,7 @@ static void __init MP_processor_info(struct mpc_cpu *m) apic_version[m->apicid] = ver; } -static int __init visws_find_smp_config(unsigned int reserve) +static void __init visws_find_smp_config(unsigned int reserve) { struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS); unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS)); @@ -230,21 +219,9 @@ static int __init visws_find_smp_config(unsigned int reserve) MP_processor_info(mp++); mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - return 1; } -static int visws_trap_init(void); - -static struct x86_quirks visws_x86_quirks __initdata = { - .arch_time_init = visws_time_init, - .arch_pre_intr_init = visws_pre_intr_init, - .arch_memory_setup = visws_memory_setup, - .arch_intr_init = NULL, - .arch_trap_init = visws_trap_init, - .mach_get_smp_config = visws_get_smp_config, - .mach_find_smp_config = visws_find_smp_config, -}; +static void visws_trap_init(void); void __init visws_early_detect(void) { @@ -257,11 +234,14 @@ void __init visws_early_detect(void) return; /* - * Install special quirks for timer, interrupt and memory setup: - * Fall back to generic behavior for traps: - * Override generic MP-table parsing: + * Override the default platform setup functions */ - x86_quirks = &visws_x86_quirks; + x86_init.resources.memory_setup = visws_memory_setup; + x86_init.mpparse.get_smp_config = visws_get_smp_config; + x86_init.mpparse.find_smp_config = visws_find_smp_config; + x86_init.irqs.pre_vector_init = visws_pre_intr_init; + x86_init.irqs.trap_init = visws_trap_init; + x86_init.timers.timer_init = visws_time_init; /* * Install reboot quirks: @@ -400,12 +380,10 @@ static __init void cobalt_init(void) co_apic_read(CO_APIC_ID)); } -static int __init visws_trap_init(void) +static void __init visws_trap_init(void) { lithium_init(); cobalt_init(); - - return 1; } /* diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 95a7289e4b0..31e6f6cfe53 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -817,15 +817,15 @@ static inline int __init activate_vmi(void) vmi_timer_ops.set_alarm = vmi_get_function(VMI_CALL_SetAlarm); vmi_timer_ops.cancel_alarm = vmi_get_function(VMI_CALL_CancelAlarm); - pv_time_ops.time_init = vmi_time_init; - pv_time_ops.get_wallclock = vmi_get_wallclock; - pv_time_ops.set_wallclock = vmi_set_wallclock; + x86_init.timers.timer_init = vmi_time_init; #ifdef CONFIG_X86_LOCAL_APIC - pv_apic_ops.setup_boot_clock = vmi_time_bsp_init; - pv_apic_ops.setup_secondary_clock = vmi_time_ap_init; + x86_init.timers.setup_percpu_clockev = vmi_time_bsp_init; + x86_cpuinit.setup_percpu_clockev = vmi_time_ap_init; #endif pv_time_ops.sched_clock = vmi_sched_clock; - pv_time_ops.get_tsc_khz = vmi_tsc_khz; + x86_platform.calibrate_tsc = vmi_tsc_khz; + x86_platform.get_wallclock = vmi_get_wallclock; + x86_platform.set_wallclock = vmi_set_wallclock; /* We have true wallclock functions; disable CMOS clock sync */ no_sync_cmos_clock = 1; diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c index 2b3eb82efee..611b9e2360d 100644 --- a/arch/x86/kernel/vmiclock_32.c +++ b/arch/x86/kernel/vmiclock_32.c @@ -68,7 +68,7 @@ unsigned long long vmi_sched_clock(void) return cycles_2_ns(vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE)); } -/* paravirt_ops.get_tsc_khz = vmi_tsc_khz */ +/* x86_platform.calibrate_tsc = vmi_tsc_khz */ unsigned long vmi_tsc_khz(void) { unsigned long long khz; diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c new file mode 100644 index 00000000000..4449a4a2c2e --- /dev/null +++ b/arch/x86/kernel/x86_init.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2009 Thomas Gleixner <tglx@linutronix.de> + * + * For licencing details see kernel-base/COPYING + */ +#include <linux/init.h> + +#include <asm/bios_ebda.h> +#include <asm/paravirt.h> +#include <asm/mpspec.h> +#include <asm/setup.h> +#include <asm/apic.h> +#include <asm/e820.h> +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/tsc.h> + +void __cpuinit x86_init_noop(void) { } +void __init x86_init_uint_noop(unsigned int unused) { } +void __init x86_init_pgd_noop(pgd_t *unused) { } + +/* + * The platform setup functions are preset with the default functions + * for standard PC hardware. + */ +struct x86_init_ops x86_init __initdata = { + + .resources = { + .probe_roms = x86_init_noop, + .reserve_resources = reserve_standard_io_resources, + .memory_setup = default_machine_specific_memory_setup, + }, + + .mpparse = { + .mpc_record = x86_init_uint_noop, + .setup_ioapic_ids = x86_init_noop, + .mpc_apic_id = default_mpc_apic_id, + .smp_read_mpc_oem = default_smp_read_mpc_oem, + .mpc_oem_bus_info = default_mpc_oem_bus_info, + .find_smp_config = default_find_smp_config, + .get_smp_config = default_get_smp_config, + }, + + .irqs = { + .pre_vector_init = init_ISA_irqs, + .intr_init = native_init_IRQ, + .trap_init = x86_init_noop, + }, + + .oem = { + .arch_setup = x86_init_noop, + .banner = default_banner, + }, + + .paging = { + .pagetable_setup_start = native_pagetable_setup_start, + .pagetable_setup_done = native_pagetable_setup_done, + }, + + .timers = { + .setup_percpu_clockev = setup_boot_APIC_clock, + .tsc_pre_init = x86_init_noop, + .timer_init = hpet_time_init, + }, +}; + +struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = { + .setup_percpu_clockev = setup_secondary_APIC_clock, +}; + +struct x86_platform_ops x86_platform = { + .calibrate_tsc = native_calibrate_tsc, + .get_wallclock = mach_get_cmos_time, + .set_wallclock = mach_set_rtc_mmss, +}; |