diff options
Diffstat (limited to 'arch/x86/kernel/reboot.c')
| -rw-r--r-- | arch/x86/kernel/reboot.c | 552 |
1 files changed, 246 insertions, 306 deletions
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 5de92f1abd7..52b1157c53e 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -1,3 +1,5 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/module.h> #include <linux/reboot.h> #include <linux/init.h> @@ -20,14 +22,12 @@ #include <asm/virtext.h> #include <asm/cpu.h> #include <asm/nmi.h> +#include <asm/smp.h> -#ifdef CONFIG_X86_32 -# include <linux/ctype.h> -# include <linux/mc146818rtc.h> -# include <asm/realmode.h> -#else -# include <asm/x86_init.h> -#endif +#include <linux/ctype.h> +#include <linux/mc146818rtc.h> +#include <asm/realmode.h> +#include <asm/x86_init.h> /* * Power off function, if any @@ -36,22 +36,6 @@ void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); static const struct desc_ptr no_idt = {}; -static int reboot_mode; -enum reboot_type reboot_type = BOOT_ACPI; -int reboot_force; - -/* - * This variable is used privately to keep track of whether or not - * reboot_type is still set to its default value (i.e., reboot= hasn't - * been set on the command line). This is needed so that we can - * suppress DMI scanning for reboot quirks. Without it, it's - * impossible to override a faulty reboot quirk without recompiling. - */ -static int reboot_default = 1; - -#if defined(CONFIG_X86_32) && defined(CONFIG_SMP) -static int reboot_cpu = -1; -#endif /* * This is set if we need to go through the 'emergency' path. @@ -64,82 +48,6 @@ static int reboot_emergency; bool port_cf9_safe = false; /* - * reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci] - * warm Don't set the cold reboot flag - * cold Set the cold reboot flag - * bios Reboot by jumping through the BIOS (only for X86_32) - * smp Reboot by executing reset on BSP or other CPU (only for X86_32) - * triple Force a triple fault (init) - * kbd Use the keyboard controller. cold reset (default) - * acpi Use the RESET_REG in the FADT - * efi Use efi reset_system runtime service - * pci Use the so-called "PCI reset register", CF9 - * force Avoid anything that could hang. - */ -static int __init reboot_setup(char *str) -{ - for (;;) { - /* - * Having anything passed on the command line via - * reboot= will cause us to disable DMI checking - * below. - */ - reboot_default = 0; - - switch (*str) { - case 'w': - reboot_mode = 0x1234; - break; - - case 'c': - reboot_mode = 0; - break; - -#ifdef CONFIG_X86_32 -#ifdef CONFIG_SMP - case 's': - if (isdigit(*(str+1))) { - reboot_cpu = (int) (*(str+1) - '0'); - if (isdigit(*(str+2))) - reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0'); - } - /* - * We will leave sorting out the final value - * when we are ready to reboot, since we might not - * have detected BSP APIC ID or smp_num_cpu - */ - break; -#endif /* CONFIG_SMP */ - - case 'b': -#endif - case 'a': - case 'k': - case 't': - case 'e': - case 'p': - reboot_type = *str; - break; - - case 'f': - reboot_force = 1; - break; - } - - str = strchr(str, ','); - if (str) - str++; - else - break; - } - return 1; -} - -__setup("reboot=", reboot_setup); - - -#ifdef CONFIG_X86_32 -/* * Reboot options and system auto-detection code provided by * Dell Inc. so their systems "just work". :-) */ @@ -152,16 +60,14 @@ static int __init set_bios_reboot(const struct dmi_system_id *d) { if (reboot_type != BOOT_BIOS) { reboot_type = BOOT_BIOS; - printk(KERN_INFO "%s series board detected. Selecting BIOS-method for reboots.\n", d->ident); + pr_info("%s series board detected. Selecting %s-method for reboots.\n", + d->ident, "BIOS"); } return 0; } -void machine_real_restart(unsigned int type) +void __noreturn machine_real_restart(unsigned int type) { - void (*restart_lowmem)(unsigned int) = (void (*)(unsigned int)) - real_mode_header->machine_real_restart_asm; - local_irq_disable(); /* @@ -181,34 +87,37 @@ void machine_real_restart(unsigned int type) /* * Switch back to the initial page table. */ +#ifdef CONFIG_X86_32 load_cr3(initial_page_table); - - /* - * Write 0x1234 to absolute memory location 0x472. The BIOS reads - * this on booting to tell it to "Bypass memory test (also warm - * boot)". This seems like a fairly standard thing that gets set by - * REBOOT.COM programs, and the previous reset routine did this - * too. */ - *((unsigned short *)0x472) = reboot_mode; +#else + write_cr3(real_mode_header->trampoline_pgd); +#endif /* Jump to the identity-mapped low memory code */ - restart_lowmem(type); +#ifdef CONFIG_X86_32 + asm volatile("jmpl *%0" : : + "rm" (real_mode_header->machine_real_restart_asm), + "a" (type)); +#else + asm volatile("ljmpl *%0" : : + "m" (real_mode_header->machine_real_restart_asm), + "D" (type)); +#endif + unreachable(); } #ifdef CONFIG_APM_MODULE EXPORT_SYMBOL(machine_real_restart); #endif -#endif /* CONFIG_X86_32 */ - /* * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot */ static int __init set_pci_reboot(const struct dmi_system_id *d) { - if (reboot_type != BOOT_CF9) { - reboot_type = BOOT_CF9; - printk(KERN_INFO "%s series board detected. " - "Selecting PCI-method for reboots.\n", d->ident); + if (reboot_type != BOOT_CF9_FORCE) { + reboot_type = BOOT_CF9_FORCE; + pr_info("%s series board detected. Selecting %s-method for reboots.\n", + d->ident, "PCI"); } return 0; } @@ -217,248 +126,276 @@ static int __init set_kbd_reboot(const struct dmi_system_id *d) { if (reboot_type != BOOT_KBD) { reboot_type = BOOT_KBD; - printk(KERN_INFO "%s series board detected. Selecting KBD-method for reboot.\n", d->ident); + pr_info("%s series board detected. Selecting %s-method for reboot.\n", + d->ident, "KBD"); } return 0; } /* - * This is a single dmi_table handling all reboot quirks. Note that - * REBOOT_BIOS is only available for 32bit + * This is a single dmi_table handling all reboot quirks. */ static struct dmi_system_id __initdata reboot_dmi_table[] = { -#ifdef CONFIG_X86_32 - { /* Handle problems with rebooting on Dell E520's */ - .callback = set_bios_reboot, - .ident = "Dell E520", + + /* Acer */ + { /* Handle reboot issue on Acer Aspire one */ + .callback = set_kbd_reboot, + .ident = "Acer Aspire One A110", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM061"), + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"), }, }, - { /* Handle problems with rebooting on Dell 1300's */ - .callback = set_bios_reboot, - .ident = "Dell PowerEdge 1300", + + /* Apple */ + { /* Handle problems with rebooting on Apple MacBook5 */ + .callback = set_pci_reboot, + .ident = "Apple MacBook5", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1300/"), + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"), }, }, - { /* Handle problems with rebooting on Dell 300's */ - .callback = set_bios_reboot, - .ident = "Dell PowerEdge 300", + { /* Handle problems with rebooting on Apple MacBookPro5 */ + .callback = set_pci_reboot, + .ident = "Apple MacBookPro5", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"), + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"), }, }, - { /* Handle problems with rebooting on Dell Optiplex 745's SFF */ - .callback = set_bios_reboot, - .ident = "Dell OptiPlex 745", + { /* Handle problems with rebooting on Apple Macmini3,1 */ + .callback = set_pci_reboot, + .ident = "Apple Macmini3,1", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"), }, }, - { /* Handle problems with rebooting on Dell Optiplex 745's DFF */ - .callback = set_bios_reboot, - .ident = "Dell OptiPlex 745", + { /* Handle problems with rebooting on the iMac9,1. */ + .callback = set_pci_reboot, + .ident = "Apple iMac9,1", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), - DMI_MATCH(DMI_BOARD_NAME, "0MM599"), + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"), }, }, - { /* Handle problems with rebooting on Dell Optiplex 745 with 0KW626 */ + + /* ASUS */ + { /* Handle problems with rebooting on ASUS P4S800 */ .callback = set_bios_reboot, - .ident = "Dell OptiPlex 745", + .ident = "ASUS P4S800", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), - DMI_MATCH(DMI_BOARD_NAME, "0KW626"), + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P4S800"), }, }, - { /* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */ + + /* Certec */ + { /* Handle problems with rebooting on Certec BPC600 */ + .callback = set_pci_reboot, + .ident = "Certec BPC600", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Certec"), + DMI_MATCH(DMI_PRODUCT_NAME, "BPC600"), + }, + }, + + /* Dell */ + { /* Handle problems with rebooting on Dell DXP061 */ .callback = set_bios_reboot, - .ident = "Dell OptiPlex 330", + .ident = "Dell DXP061", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 330"), - DMI_MATCH(DMI_BOARD_NAME, "0KP561"), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"), }, }, - { /* Handle problems with rebooting on Dell Optiplex 360 with 0T656F */ + { /* Handle problems with rebooting on Dell E520's */ .callback = set_bios_reboot, - .ident = "Dell OptiPlex 360", + .ident = "Dell E520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 360"), - DMI_MATCH(DMI_BOARD_NAME, "0T656F"), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM061"), }, }, - { /* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G */ - .callback = set_bios_reboot, - .ident = "Dell OptiPlex 760", + { /* Handle problems with rebooting on the Latitude E5410. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E5410", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"), - DMI_MATCH(DMI_BOARD_NAME, "0G919G"), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5410"), }, }, - { /* Handle problems with rebooting on Dell 2400's */ - .callback = set_bios_reboot, - .ident = "Dell PowerEdge 2400", + { /* Handle problems with rebooting on the Latitude E5420. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E5420", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5420"), }, }, - { /* Handle problems with rebooting on Dell T5400's */ - .callback = set_bios_reboot, - .ident = "Dell Precision T5400", + { /* Handle problems with rebooting on the Latitude E6320. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6320", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"), }, }, - { /* Handle problems with rebooting on Dell T7400's */ - .callback = set_bios_reboot, - .ident = "Dell Precision T7400", + { /* Handle problems with rebooting on the Latitude E6420. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6420", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T7400"), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"), }, }, - { /* Handle problems with rebooting on HP laptops */ + { /* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */ .callback = set_bios_reboot, - .ident = "HP Compaq Laptop", + .ident = "Dell OptiPlex 330", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 330"), + DMI_MATCH(DMI_BOARD_NAME, "0KP561"), }, }, - { /* Handle problems with rebooting on Dell XPS710 */ + { /* Handle problems with rebooting on Dell Optiplex 360 with 0T656F */ .callback = set_bios_reboot, - .ident = "Dell XPS710", + .ident = "Dell OptiPlex 360", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 360"), + DMI_MATCH(DMI_BOARD_NAME, "0T656F"), }, }, - { /* Handle problems with rebooting on Dell DXP061 */ + { /* Handle problems with rebooting on Dell Optiplex 745's SFF */ .callback = set_bios_reboot, - .ident = "Dell DXP061", + .ident = "Dell OptiPlex 745", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), }, }, - { /* Handle problems with rebooting on Sony VGN-Z540N */ + { /* Handle problems with rebooting on Dell Optiplex 745's DFF */ .callback = set_bios_reboot, - .ident = "Sony VGN-Z540N", + .ident = "Dell OptiPlex 745", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), + DMI_MATCH(DMI_BOARD_NAME, "0MM599"), }, }, - { /* Handle problems with rebooting on CompuLab SBC-FITPC2 */ + { /* Handle problems with rebooting on Dell Optiplex 745 with 0KW626 */ .callback = set_bios_reboot, - .ident = "CompuLab SBC-FITPC2", + .ident = "Dell OptiPlex 745", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"), - DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"), + DMI_MATCH(DMI_BOARD_NAME, "0KW626"), }, }, - { /* Handle problems with rebooting on ASUS P4S800 */ + { /* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G */ .callback = set_bios_reboot, - .ident = "ASUS P4S800", + .ident = "Dell OptiPlex 760", .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4S800"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 760"), + DMI_MATCH(DMI_BOARD_NAME, "0G919G"), }, }, -#endif /* CONFIG_X86_32 */ - - { /* Handle reboot issue on Acer Aspire one */ - .callback = set_kbd_reboot, - .ident = "Acer Aspire One A110", + { /* Handle problems with rebooting on the OptiPlex 990. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 990", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), }, }, - { /* Handle problems with rebooting on Apple MacBook5 */ - .callback = set_pci_reboot, - .ident = "Apple MacBook5", + { /* Handle problems with rebooting on Dell 300's */ + .callback = set_bios_reboot, + .ident = "Dell PowerEdge 300", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"), }, }, - { /* Handle problems with rebooting on Apple MacBookPro5 */ - .callback = set_pci_reboot, - .ident = "Apple MacBookPro5", + { /* Handle problems with rebooting on Dell 1300's */ + .callback = set_bios_reboot, + .ident = "Dell PowerEdge 1300", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1300/"), }, }, - { /* Handle problems with rebooting on Apple Macmini3,1 */ - .callback = set_pci_reboot, - .ident = "Apple Macmini3,1", + { /* Handle problems with rebooting on Dell 2400's */ + .callback = set_bios_reboot, + .ident = "Dell PowerEdge 2400", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"), }, }, - { /* Handle problems with rebooting on the iMac9,1. */ + { /* Handle problems with rebooting on the Dell PowerEdge C6100. */ .callback = set_pci_reboot, - .ident = "Apple iMac9,1", + .ident = "Dell PowerEdge C6100", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"), + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "C6100"), }, }, - { /* Handle problems with rebooting on the Latitude E6320. */ + { /* Handle problems with rebooting on the Precision M6600. */ .callback = set_pci_reboot, - .ident = "Dell Latitude E6320", + .ident = "Dell Precision M6600", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"), }, }, - { /* Handle problems with rebooting on the Latitude E5420. */ - .callback = set_pci_reboot, - .ident = "Dell Latitude E5420", + { /* Handle problems with rebooting on Dell T5400's */ + .callback = set_bios_reboot, + .ident = "Dell Precision T5400", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"), }, }, - { /* Handle problems with rebooting on the Latitude E6420. */ - .callback = set_pci_reboot, - .ident = "Dell Latitude E6420", + { /* Handle problems with rebooting on Dell T7400's */ + .callback = set_bios_reboot, + .ident = "Dell Precision T7400", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T7400"), }, }, - { /* Handle problems with rebooting on the OptiPlex 990. */ - .callback = set_pci_reboot, - .ident = "Dell OptiPlex 990", + { /* Handle problems with rebooting on Dell XPS710 */ + .callback = set_bios_reboot, + .ident = "Dell XPS710", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), + DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"), }, }, - { /* Handle problems with rebooting on the Precision M6600. */ - .callback = set_pci_reboot, - .ident = "Dell OptiPlex 990", + + /* Hewlett-Packard */ + { /* Handle problems with rebooting on HP laptops */ + .callback = set_bios_reboot, + .ident = "HP Compaq Laptop", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"), + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"), + }, + }, + + /* Sony */ + { /* Handle problems with rebooting on Sony VGN-Z540N */ + .callback = set_bios_reboot, + .ident = "Sony VGN-Z540N", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), }, }, + { } }; @@ -531,23 +468,30 @@ void __attribute__((weak)) mach_reboot_fixups(void) } /* - * Windows compatible x86 hardware expects the following on reboot: + * To the best of our knowledge Windows compatible x86 hardware expects + * the following on reboot: * * 1) If the FADT has the ACPI reboot register flag set, try it * 2) If still alive, write to the keyboard controller * 3) If still alive, write to the ACPI reboot register again * 4) If still alive, write to the keyboard controller again + * 5) If still alive, call the EFI runtime service to reboot + * 6) If no EFI runtime service, call the BIOS to do a reboot * - * If the machine is still alive at this stage, it gives up. We default to - * following the same pattern, except that if we're still alive after (4) we'll - * try to force a triple fault and then cycle between hitting the keyboard - * controller and doing that + * We default to following the same pattern. We also have + * two other reboot methods: 'triple fault' and 'PCI', which + * can be triggered via the reboot= kernel boot option or + * via quirks. + * + * This means that this function can never return, it can misbehave + * by not rebooting properly and hanging. */ static void native_machine_emergency_restart(void) { int i; int attempt = 0; int orig_reboot_type = reboot_type; + unsigned short mode; if (reboot_emergency) emergency_vmx_disable_all(); @@ -555,11 +499,17 @@ static void native_machine_emergency_restart(void) tboot_shutdown(TB_SHUTDOWN_REBOOT); /* Tell the BIOS if we want cold or warm reboot */ - *((unsigned short *)__va(0x472)) = reboot_mode; + mode = reboot_mode == REBOOT_WARM ? 0x1234 : 0; + *((unsigned short *)__va(0x472)) = mode; for (;;) { /* Could also try the reset bit in the Hammer NB */ switch (reboot_type) { + case BOOT_ACPI: + acpi_reboot(); + reboot_type = BOOT_KBD; + break; + case BOOT_KBD: mach_reboot_fixups(); /* For board specific fixups */ @@ -573,51 +523,48 @@ static void native_machine_emergency_restart(void) attempt = 1; reboot_type = BOOT_ACPI; } else { - reboot_type = BOOT_TRIPLE; + reboot_type = BOOT_EFI; } break; - case BOOT_TRIPLE: - load_idt(&no_idt); - __asm__ __volatile__("int3"); - - reboot_type = BOOT_KBD; + case BOOT_EFI: + if (efi_enabled(EFI_RUNTIME_SERVICES)) + efi.reset_system(reboot_mode == REBOOT_WARM ? + EFI_RESET_WARM : + EFI_RESET_COLD, + EFI_SUCCESS, 0, NULL); + reboot_type = BOOT_BIOS; break; -#ifdef CONFIG_X86_32 case BOOT_BIOS: machine_real_restart(MRR_BIOS); - reboot_type = BOOT_KBD; - break; -#endif - - case BOOT_ACPI: - acpi_reboot(); - reboot_type = BOOT_KBD; - break; - - case BOOT_EFI: - if (efi_enabled) - efi.reset_system(reboot_mode ? - EFI_RESET_WARM : - EFI_RESET_COLD, - EFI_SUCCESS, 0, NULL); - reboot_type = BOOT_KBD; + /* We're probably dead after this, but... */ + reboot_type = BOOT_CF9_SAFE; break; - case BOOT_CF9: + case BOOT_CF9_FORCE: port_cf9_safe = true; /* Fall through */ - case BOOT_CF9_COND: + case BOOT_CF9_SAFE: if (port_cf9_safe) { - u8 cf9 = inb(0xcf9) & ~6; + u8 reboot_code = reboot_mode == REBOOT_WARM ? 0x06 : 0x0E; + u8 cf9 = inb(0xcf9) & ~reboot_code; outb(cf9|2, 0xcf9); /* Request hard reset */ udelay(50); - outb(cf9|6, 0xcf9); /* Actually do the reset */ + /* Actually do the reset */ + outb(cf9|reboot_code, 0xcf9); udelay(50); } + reboot_type = BOOT_TRIPLE; + break; + + case BOOT_TRIPLE: + load_idt(&no_idt); + __asm__ __volatile__("int3"); + + /* We're probably dead after this, but... */ reboot_type = BOOT_KBD; break; } @@ -627,29 +574,26 @@ static void native_machine_emergency_restart(void) void native_machine_shutdown(void) { /* Stop the cpus and apics */ -#ifdef CONFIG_SMP - - /* The boot cpu is always logical cpu 0 */ - int reboot_cpu_id = 0; - -#ifdef CONFIG_X86_32 - /* See if there has been given a command line override */ - if ((reboot_cpu != -1) && (reboot_cpu < nr_cpu_ids) && - cpu_online(reboot_cpu)) - reboot_cpu_id = reboot_cpu; +#ifdef CONFIG_X86_IO_APIC + /* + * Disabling IO APIC before local APIC is a workaround for + * erratum AVR31 in "Intel Atom Processor C2000 Product Family + * Specification Update". In this situation, interrupts that target + * a Logical Processor whose Local APIC is either in the process of + * being hardware disabled or software disabled are neither delivered + * nor discarded. When this erratum occurs, the processor may hang. + * + * Even without the erratum, it still makes sense to quiet IO APIC + * before disabling Local APIC. + */ + disable_IO_APIC(); #endif - /* Make certain the cpu I'm about to reboot on is online */ - if (!cpu_online(reboot_cpu_id)) - reboot_cpu_id = smp_processor_id(); - - /* Make certain I only run on the appropriate processor */ - set_cpus_allowed_ptr(current, cpumask_of(reboot_cpu_id)); - +#ifdef CONFIG_SMP /* - * O.K Now that I'm on the appropriate processor, stop all of the - * others. Also disable the local irq to not receive the per-cpu - * timer interrupt which may trigger scheduler's load balance. + * Stop all of the others. Also disable the local irq to + * not receive the per-cpu timer interrupt which may trigger + * scheduler's load balance. */ local_irq_disable(); stop_other_cpus(); @@ -657,10 +601,6 @@ void native_machine_shutdown(void) lapic_shutdown(); -#ifdef CONFIG_X86_IO_APIC - disable_IO_APIC(); -#endif - #ifdef CONFIG_HPET_TIMER hpet_disable(); #endif @@ -678,7 +618,7 @@ static void __machine_emergency_restart(int emergency) static void native_machine_restart(char *__unused) { - printk("machine restart\n"); + pr_notice("machine restart\n"); if (!reboot_force) machine_shutdown(); |