diff options
Diffstat (limited to 'arch/x86/kernel/entry_64.S')
| -rw-r--r-- | arch/x86/kernel/entry_64.S | 1217 |
1 files changed, 678 insertions, 539 deletions
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 1c17d7c751a..c844f0816ab 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -9,6 +9,8 @@ /* * entry.S contains the system-call and fault low-level handling routines. * + * Some of this is documented in Documentation/x86/entry_64.txt + * * NOTE: This code handles signal-recognition, which happens every time * after an interrupt and after each system call. * @@ -18,7 +20,7 @@ * A note on terminology: * - top of stack: Architecture defined interrupt frame from SS to RIP * at the top of the kernel process stack. - * - partial stack frame: partially saved registers upto R11. + * - partial stack frame: partially saved registers up to R11. * - full stack frame: Like partial stack frame, but all register saved. * * Some macro usage: @@ -34,7 +36,7 @@ * - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack * frame that is otherwise undefined after a SYSCALL * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging. - * - errorentry/paranoidentry/zeroentry - Define exception entry points. + * - idtentry - Define exception entry points. */ #include <linux/linkage.h> @@ -51,8 +53,12 @@ #include <asm/page_types.h> #include <asm/irqflags.h> #include <asm/paravirt.h> -#include <asm/ftrace.h> #include <asm/percpu.h> +#include <asm/asm.h> +#include <asm/context_tracking.h> +#include <asm/smap.h> +#include <asm/pgtable_types.h> +#include <linux/err.h> /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ #include <linux/elf-em.h> @@ -61,104 +67,7 @@ #define __AUDIT_ARCH_LE 0x40000000 .code64 -#ifdef CONFIG_FUNCTION_TRACER -#ifdef CONFIG_DYNAMIC_FTRACE -ENTRY(mcount) - retq -END(mcount) - -ENTRY(ftrace_caller) - cmpl $0, function_trace_stop - jne ftrace_stub - - MCOUNT_SAVE_FRAME - - movq 0x38(%rsp), %rdi - movq 8(%rbp), %rsi - subq $MCOUNT_INSN_SIZE, %rdi - -GLOBAL(ftrace_call) - call ftrace_stub - - MCOUNT_RESTORE_FRAME - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -GLOBAL(ftrace_graph_call) - jmp ftrace_stub -#endif - -GLOBAL(ftrace_stub) - retq -END(ftrace_caller) - -#else /* ! CONFIG_DYNAMIC_FTRACE */ -ENTRY(mcount) - cmpl $0, function_trace_stop - jne ftrace_stub - - cmpq $ftrace_stub, ftrace_trace_function - jnz trace - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - cmpq $ftrace_stub, ftrace_graph_return - jnz ftrace_graph_caller - - cmpq $ftrace_graph_entry_stub, ftrace_graph_entry - jnz ftrace_graph_caller -#endif - -GLOBAL(ftrace_stub) - retq - -trace: - MCOUNT_SAVE_FRAME - - movq 0x38(%rsp), %rdi - movq 8(%rbp), %rsi - subq $MCOUNT_INSN_SIZE, %rdi - - call *ftrace_trace_function - - MCOUNT_RESTORE_FRAME - - jmp ftrace_stub -END(mcount) -#endif /* CONFIG_DYNAMIC_FTRACE */ -#endif /* CONFIG_FUNCTION_TRACER */ - -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -ENTRY(ftrace_graph_caller) - cmpl $0, function_trace_stop - jne ftrace_stub - - MCOUNT_SAVE_FRAME - - leaq 8(%rbp), %rdi - movq 0x38(%rsp), %rsi - subq $MCOUNT_INSN_SIZE, %rsi - - call prepare_ftrace_return - - MCOUNT_RESTORE_FRAME - - retq -END(ftrace_graph_caller) - -GLOBAL(return_to_handler) - subq $80, %rsp - - /* Save the return values */ - movq %rax, (%rsp) - movq %rdx, 8(%rsp) - - call ftrace_return_to_handler - - movq %rax, 72(%rsp) - movq 8(%rsp), %rdx - movq (%rsp), %rax - addq $72, %rsp - retq -#endif + .section .entry.text, "ax" #ifndef CONFIG_PREEMPT @@ -183,6 +92,44 @@ ENDPROC(native_usergs_sysret64) .endm /* + * When dynamic function tracer is enabled it will add a breakpoint + * to all locations that it is about to modify, sync CPUs, update + * all the code, sync CPUs, then remove the breakpoints. In this time + * if lockdep is enabled, it might jump back into the debug handler + * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF). + * + * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to + * make sure the stack pointer does not get reset back to the top + * of the debug stack, and instead just reuses the current stack. + */ +#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS) + +.macro TRACE_IRQS_OFF_DEBUG + call debug_stack_set_zero + TRACE_IRQS_OFF + call debug_stack_reset +.endm + +.macro TRACE_IRQS_ON_DEBUG + call debug_stack_set_zero + TRACE_IRQS_ON + call debug_stack_reset +.endm + +.macro TRACE_IRQS_IRETQ_DEBUG offset=ARGOFFSET + bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */ + jnc 1f + TRACE_IRQS_ON_DEBUG +1: +.endm + +#else +# define TRACE_IRQS_OFF_DEBUG TRACE_IRQS_OFF +# define TRACE_IRQS_ON_DEBUG TRACE_IRQS_ON +# define TRACE_IRQS_IRETQ_DEBUG TRACE_IRQS_IRETQ +#endif + +/* * C code is not supposed to know about undefined top of stack. Every time * a C function with an pt_regs argument is called from the SYSCALL based * fast path FIXUP_TOP_OF_STACK is needed. @@ -211,23 +158,17 @@ ENDPROC(native_usergs_sysret64) .macro FAKE_STACK_FRAME child_rip /* push in order ss, rsp, eflags, cs, rip */ xorl %eax, %eax - pushq $__KERNEL_DS /* ss */ - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi $__KERNEL_DS /* ss */ /*CFI_REL_OFFSET ss,0*/ - pushq %rax /* rsp */ - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi %rax /* rsp */ CFI_REL_OFFSET rsp,0 - pushq $X86_EFLAGS_IF /* eflags - interrupts on */ - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi $(X86_EFLAGS_IF|X86_EFLAGS_FIXED) /* eflags - interrupts on */ /*CFI_REL_OFFSET rflags,0*/ - pushq $__KERNEL_CS /* cs */ - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi $__KERNEL_CS /* cs */ /*CFI_REL_OFFSET cs,0*/ - pushq \child_rip /* rip */ - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi \child_rip /* rip */ CFI_REL_OFFSET rip,0 - pushq %rax /* orig rax */ - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi %rax /* orig rax */ .endm .macro UNFAKE_STACK_FRAME @@ -299,23 +240,27 @@ ENDPROC(native_usergs_sysret64) .endm /* save partial stack frame */ -ENTRY(save_args) - XCPT_FRAME + .macro SAVE_ARGS_IRQ cld - movq_cfi rdi, RDI+16-ARGOFFSET - movq_cfi rsi, RSI+16-ARGOFFSET - movq_cfi rdx, RDX+16-ARGOFFSET - movq_cfi rcx, RCX+16-ARGOFFSET - movq_cfi rax, RAX+16-ARGOFFSET - movq_cfi r8, R8+16-ARGOFFSET - movq_cfi r9, R9+16-ARGOFFSET - movq_cfi r10, R10+16-ARGOFFSET - movq_cfi r11, R11+16-ARGOFFSET - - leaq -ARGOFFSET+16(%rsp),%rdi /* arg1 for handler */ - movq_cfi rbp, 8 /* push %rbp */ - leaq 8(%rsp), %rbp /* mov %rsp, %ebp */ - testl $3, CS(%rdi) + /* start from rbp in pt_regs and jump over */ + movq_cfi rdi, (RDI-RBP) + movq_cfi rsi, (RSI-RBP) + movq_cfi rdx, (RDX-RBP) + movq_cfi rcx, (RCX-RBP) + movq_cfi rax, (RAX-RBP) + movq_cfi r8, (R8-RBP) + movq_cfi r9, (R9-RBP) + movq_cfi r10, (R10-RBP) + movq_cfi r11, (R11-RBP) + + /* Save rbp so that we can unwind from get_irq_regs() */ + movq_cfi rbp, 0 + + /* Save previous stack value */ + movq %rsp, %rsi + + leaq -RBP(%rsp),%rdi /* arg1 for handler */ + testl $3, CS-RBP(%rsi) je 1f SWAPGS /* @@ -325,37 +270,20 @@ ENTRY(save_args) * moving irq_enter into assembly, which would be too much work) */ 1: incl PER_CPU_VAR(irq_count) - jne 2f - popq_cfi %rax /* move return address... */ - mov PER_CPU_VAR(irq_stack_ptr),%rsp - EMPTY_FRAME 0 - pushq_cfi %rbp /* backlink for unwinder */ - pushq_cfi %rax /* ... to the new stack */ - /* - * We entered an interrupt context - irqs are off: - */ -2: TRACE_IRQS_OFF - ret - CFI_ENDPROC -END(save_args) - -ENTRY(save_rest) - PARTIAL_FRAME 1 REST_SKIP+8 - movq 5*8+16(%rsp), %r11 /* save return address */ - movq_cfi rbx, RBX+16 - movq_cfi rbp, RBP+16 - movq_cfi r12, R12+16 - movq_cfi r13, R13+16 - movq_cfi r14, R14+16 - movq_cfi r15, R15+16 - movq %r11, 8(%rsp) /* return address */ - FIXUP_TOP_OF_STACK %r11, 16 - ret - CFI_ENDPROC -END(save_rest) + cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp + CFI_DEF_CFA_REGISTER rsi + + /* Store previous stack value */ + pushq %rsi + CFI_ESCAPE 0x0f /* DW_CFA_def_cfa_expression */, 6, \ + 0x77 /* DW_OP_breg7 */, 0, \ + 0x06 /* DW_OP_deref */, \ + 0x08 /* DW_OP_const1u */, SS+8-RBP, \ + 0x22 /* DW_OP_plus */ + /* We entered an interrupt context - irqs are off: */ + TRACE_IRQS_OFF + .endm -/* save complete stack frame */ - .pushsection .kprobes.text, "ax" ENTRY(save_paranoid) XCPT_FRAME 1 RDI+8 cld @@ -384,7 +312,6 @@ ENTRY(save_paranoid) 1: ret CFI_ENDPROC END(save_paranoid) - .popsection /* * A newly forked process directly context switches into this address. @@ -396,10 +323,8 @@ ENTRY(ret_from_fork) LOCK ; btr $TIF_FORK,TI_flags(%r8) - push kernel_eflags(%rip) - CFI_ADJUST_CFA_OFFSET 8 - popf # reset kernel eflags - CFI_ADJUST_CFA_OFFSET -8 + pushq_cfi $0x0002 + popfq_cfi # reset kernel eflags call schedule_tail # rdi: 'prev' task parameter @@ -408,7 +333,7 @@ ENTRY(ret_from_fork) RESTORE_REST testl $3, CS-ARGOFFSET(%rsp) # from kernel_thread? - je int_ret_from_sys_call + jz 1f testl $_TIF_IA32, TI_flags(%rcx) # 32-bit compat task needs IRET jnz int_ret_from_sys_call @@ -416,14 +341,23 @@ ENTRY(ret_from_fork) RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET jmp ret_from_sys_call # go to the SYSRET fastpath +1: + subq $REST_SKIP, %rsp # leave space for volatiles + CFI_ADJUST_CFA_OFFSET REST_SKIP + movq %rbp, %rdi + call *%rbx + movl $0, RAX(%rsp) + RESTORE_REST + jmp int_ret_from_sys_call CFI_ENDPROC END(ret_from_fork) /* - * System call entry. Upto 6 arguments in registers are supported. + * System call entry. Up to 6 arguments in registers are supported. * * SYSCALL does not save anything on the stack and does not change the - * stack pointer. + * stack pointer. However, it does mask the flags register for us, so + * CLD and CLAC are not needed. */ /* @@ -462,7 +396,7 @@ ENTRY(system_call) * after the swapgs, so that it can do the swapgs * for the guest and jump here on syscall. */ -ENTRY(system_call_after_swapgs) +GLOBAL(system_call_after_swapgs) movq %rsp,PER_CPU_VAR(old_rsp) movq PER_CPU_VAR(kernel_stack),%rsp @@ -471,15 +405,19 @@ ENTRY(system_call_after_swapgs) * and short: */ ENABLE_INTERRUPTS(CLBR_NONE) - SAVE_ARGS 8,1 + SAVE_ARGS 8,0 movq %rax,ORIG_RAX-ARGOFFSET(%rsp) movq %rcx,RIP-ARGOFFSET(%rsp) CFI_REL_OFFSET rip,RIP-ARGOFFSET - GET_THREAD_INFO(%rcx) - testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx) + testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jnz tracesys system_call_fastpath: +#if __SYSCALL_MASK == ~0 cmpq $__NR_syscall_max,%rax +#else + andl $__SYSCALL_MASK,%eax + cmpl $__NR_syscall_max,%eax +#endif ja badsys movq %r10,%rcx call *sys_call_table(,%rax,8) # XXX: rip relative @@ -493,10 +431,9 @@ ret_from_sys_call: /* edi: flagmask */ sysret_check: LOCKDEP_SYS_EXIT - GET_THREAD_INFO(%rcx) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - movl TI_flags(%rcx),%edx + movl TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET),%edx andl %edi,%edx jnz sysret_careful CFI_REMEMBER_STATE @@ -506,7 +443,7 @@ sysret_check: TRACE_IRQS_ON movq RIP-ARGOFFSET(%rsp),%rcx CFI_REGISTER rip,rcx - RESTORE_ARGS 0,-ARG_SKIP,1 + RESTORE_ARGS 1,-ARG_SKIP,0 /*CFI_REGISTER rflags,r11*/ movq PER_CPU_VAR(old_rsp), %rsp USERGS_SYSRET64 @@ -519,11 +456,9 @@ sysret_careful: jnc sysret_signal TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) - pushq %rdi - CFI_ADJUST_CFA_OFFSET 8 - call schedule - popq %rdi - CFI_ADJUST_CFA_OFFSET -8 + pushq_cfi %rdi + SCHEDULE_USER + popq_cfi %rdi jmp sysret_check /* Handle a signal */ @@ -534,20 +469,13 @@ sysret_signal: bt $TIF_SYSCALL_AUDIT,%edx jc sysret_audit #endif - /* edx: work flags (arg3) */ - leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1 - xorl %esi,%esi # oldset -> arg2 - SAVE_REST - FIXUP_TOP_OF_STACK %r11 - call do_notify_resume - RESTORE_TOP_OF_STACK %r11 - RESTORE_REST - movl $_TIF_WORK_MASK,%edi - /* Use IRET because user could have changed frame. This - works because ptregscall_common has called FIXUP_TOP_OF_STACK. */ - DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF - jmp int_with_check + /* + * We have a signal, or exit tracing or single-step. + * These all wind up with the iret return path anyway, + * so just join that path right now. + */ + FIXUP_TOP_OF_STACK %r11, -ARGOFFSET + jmp int_check_syscall_exit_work badsys: movq $-ENOSYS,RAX-ARGOFFSET(%rsp) @@ -556,7 +484,7 @@ badsys: #ifdef CONFIG_AUDITSYSCALL /* * Fast path for syscall audit without full syscall trace. - * We just call audit_syscall_entry() directly, and then + * We just call __audit_syscall_entry() directly, and then * jump back to the normal fast path. */ auditsys: @@ -566,22 +494,21 @@ auditsys: movq %rdi,%rdx /* 3rd arg: 1st syscall arg */ movq %rax,%rsi /* 2nd arg: syscall number */ movl $AUDIT_ARCH_X86_64,%edi /* 1st arg: audit arch */ - call audit_syscall_entry + call __audit_syscall_entry LOAD_ARGS 0 /* reload call-clobbered registers */ jmp system_call_fastpath /* - * Return fast path for syscall audit. Call audit_syscall_exit() + * Return fast path for syscall audit. Call __audit_syscall_exit() * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT * masked off. */ sysret_audit: - movq %rax,%rsi /* second arg, syscall return value */ - cmpq $0,%rax /* is it < 0? */ - setl %al /* 1 if so, 0 if not */ + movq RAX-ARGOFFSET(%rsp),%rsi /* second arg, syscall return value */ + cmpq $-MAX_ERRNO,%rsi /* is it < -MAX_ERRNO? */ + setbe %al /* 1 if so, 0 if not */ movzbl %al,%edi /* zero-extend that into %edi */ - inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */ - call audit_syscall_exit + call __audit_syscall_exit movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi jmp sysret_check #endif /* CONFIG_AUDITSYSCALL */ @@ -589,7 +516,7 @@ sysret_audit: /* Do syscall tracing */ tracesys: #ifdef CONFIG_AUDITSYSCALL - testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx) + testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) jz auditsys #endif SAVE_REST @@ -604,7 +531,12 @@ tracesys: */ LOAD_ARGS ARGOFFSET, 1 RESTORE_REST +#if __SYSCALL_MASK == ~0 cmpq $__NR_syscall_max,%rax +#else + andl $__SYSCALL_MASK,%eax + cmpl $__NR_syscall_max,%eax +#endif ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */ movq %r10,%rcx /* fixup for C */ call *sys_call_table(,%rax,8) @@ -618,8 +550,6 @@ tracesys: GLOBAL(int_ret_from_sys_call) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - testl $3,CS-ARGOFFSET(%rsp) - je retint_restore_args movl $_TIF_ALLWORK_MASK,%edi /* edi: mask to check */ GLOBAL(int_with_check) @@ -639,11 +569,9 @@ int_careful: jnc int_very_careful TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) - pushq %rdi - CFI_ADJUST_CFA_OFFSET 8 - call schedule - popq %rdi - CFI_ADJUST_CFA_OFFSET -8 + pushq_cfi %rdi + SCHEDULE_USER + popq_cfi %rdi DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF jmp int_with_check @@ -652,16 +580,15 @@ int_careful: int_very_careful: TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) +int_check_syscall_exit_work: SAVE_REST /* Check for syscall exit trace */ testl $_TIF_WORK_SYSCALL_EXIT,%edx jz int_signal - pushq %rdi - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi %rdi leaq 8(%rsp),%rdi # &ptregs -> arg1 call syscall_trace_leave - popq %rdi - CFI_ADJUST_CFA_OFFSET -8 + popq_cfi %rdi andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi jmp int_restore_rest @@ -680,28 +607,38 @@ int_restore_rest: CFI_ENDPROC END(system_call) -/* - * Certain special system calls that need to save a complete full stack frame. - */ - .macro PTREGSCALL label,func,arg -ENTRY(\label) - PARTIAL_FRAME 1 8 /* offset 8: return address */ - subq $REST_SKIP, %rsp - CFI_ADJUST_CFA_OFFSET REST_SKIP - call save_rest + .macro FORK_LIKE func +ENTRY(stub_\func) + CFI_STARTPROC + popq %r11 /* save return address */ + PARTIAL_FRAME 0 + SAVE_REST + pushq %r11 /* put it back on stack */ + FIXUP_TOP_OF_STACK %r11, 8 DEFAULT_FRAME 0 8 /* offset 8: return address */ - leaq 8(%rsp), \arg /* pt_regs pointer */ + call sys_\func + RESTORE_TOP_OF_STACK %r11, 8 + ret $REST_SKIP /* pop extended registers */ + CFI_ENDPROC +END(stub_\func) + .endm + + .macro FIXED_FRAME label,func +ENTRY(\label) + CFI_STARTPROC + PARTIAL_FRAME 0 8 /* offset 8: return address */ + FIXUP_TOP_OF_STACK %r11, 8-ARGOFFSET call \func - jmp ptregscall_common + RESTORE_TOP_OF_STACK %r11, 8-ARGOFFSET + ret CFI_ENDPROC END(\label) .endm - PTREGSCALL stub_clone, sys_clone, %r8 - PTREGSCALL stub_fork, sys_fork, %rdi - PTREGSCALL stub_vfork, sys_vfork, %rdi - PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx - PTREGSCALL stub_iopl, sys_iopl, %rsi + FORK_LIKE clone + FORK_LIKE fork + FORK_LIKE vfork + FIXED_FRAME stub_iopl, sys_iopl ENTRY(ptregscall_common) DEFAULT_FRAME 1 8 /* offset 8: return address */ @@ -718,14 +655,11 @@ END(ptregscall_common) ENTRY(stub_execve) CFI_STARTPROC - popq %r11 - CFI_ADJUST_CFA_OFFSET -8 - CFI_REGISTER rip, r11 + addq $8, %rsp + PARTIAL_FRAME 0 SAVE_REST FIXUP_TOP_OF_STACK %r11 - movq %rsp, %rcx call sys_execve - RESTORE_TOP_OF_STACK %r11 movq %rax,RAX(%rsp) RESTORE_REST jmp int_ret_from_sys_call @@ -739,9 +673,8 @@ END(stub_execve) ENTRY(stub_rt_sigreturn) CFI_STARTPROC addq $8, %rsp - CFI_ADJUST_CFA_OFFSET -8 + PARTIAL_FRAME 0 SAVE_REST - movq %rsp,%rdi FIXUP_TOP_OF_STACK %r11 call sys_rt_sigreturn movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer @@ -750,6 +683,36 @@ ENTRY(stub_rt_sigreturn) CFI_ENDPROC END(stub_rt_sigreturn) +#ifdef CONFIG_X86_X32_ABI +ENTRY(stub_x32_rt_sigreturn) + CFI_STARTPROC + addq $8, %rsp + PARTIAL_FRAME 0 + SAVE_REST + FIXUP_TOP_OF_STACK %r11 + call sys32_x32_rt_sigreturn + movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer + RESTORE_REST + jmp int_ret_from_sys_call + CFI_ENDPROC +END(stub_x32_rt_sigreturn) + +ENTRY(stub_x32_execve) + CFI_STARTPROC + addq $8, %rsp + PARTIAL_FRAME 0 + SAVE_REST + FIXUP_TOP_OF_STACK %r11 + call compat_sys_execve + RESTORE_TOP_OF_STACK %r11 + movq %rax,RAX(%rsp) + RESTORE_REST + jmp int_ret_from_sys_call + CFI_ENDPROC +END(stub_x32_execve) + +#endif + /* * Build the entry stubs and pointer table with some assembler magic. * We pack 7 stubs into a single 32-byte chunk, which will fit in a @@ -757,7 +720,7 @@ END(stub_rt_sigreturn) */ .section .init.rodata,"a" ENTRY(interrupt) - .text + .section .entry.text .p2align 5 .p2align CONFIG_X86_L1_CACHE_SHIFT ENTRY(irq_entries_start) @@ -770,14 +733,13 @@ vector=FIRST_EXTERNAL_VECTOR .if vector <> FIRST_EXTERNAL_VECTOR CFI_ADJUST_CFA_OFFSET -8 .endif -1: pushq $(~vector+0x80) /* Note: always in signed byte range */ - CFI_ADJUST_CFA_OFFSET 8 +1: pushq_cfi $(~vector+0x80) /* Note: always in signed byte range */ .if ((vector-FIRST_EXTERNAL_VECTOR)%7) <> 6 jmp 2f .endif .previous .quad 1b - .text + .section .entry.text vector=vector+1 .endif .endr @@ -800,10 +762,10 @@ END(interrupt) /* 0(%rsp): ~(interrupt number) */ .macro interrupt func - subq $10*8, %rsp - CFI_ADJUST_CFA_OFFSET 10*8 - call save_args - PARTIAL_FRAME 0 + /* reserve pt_regs for scratch regs and rbp */ + subq $ORIG_RAX-RBP, %rsp + CFI_ADJUST_CFA_OFFSET ORIG_RAX-RBP + SAVE_ARGS_IRQ call \func .endm @@ -814,6 +776,7 @@ END(interrupt) .p2align CONFIG_X86_L1_CACHE_SHIFT common_interrupt: XCPT_FRAME + ASM_CLAC addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */ interrupt do_IRQ /* 0(%rsp): old_rsp-ARGOFFSET */ @@ -821,9 +784,14 @@ ret_from_intr: DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF decl PER_CPU_VAR(irq_count) - leaveq + + /* Restore saved previous stack */ + popq %rsi + CFI_DEF_CFA rsi,SS+8-RBP /* reg/off reset after def_cfa_expr */ + leaq ARGOFFSET-RBP(%rsi), %rsp CFI_DEF_CFA_REGISTER rsp - CFI_ADJUST_CFA_OFFSET -8 + CFI_ADJUST_CFA_OFFSET RBP-ARGOFFSET + exit_intr: GET_THREAD_INFO(%rcx) testl $3,CS-ARGOFFSET(%rsp) @@ -859,22 +827,49 @@ retint_restore_args: /* return to kernel space */ */ TRACE_IRQS_IRETQ restore_args: - RESTORE_ARGS 0,8,0 + RESTORE_ARGS 1,8,1 irq_return: INTERRUPT_RETURN - .section __ex_table, "a" - .quad irq_return, bad_iret - .previous - -#ifdef CONFIG_PARAVIRT ENTRY(native_iret) + /* + * Are we returning to a stack segment from the LDT? Note: in + * 64-bit mode SS:RSP on the exception stack is always valid. + */ +#ifdef CONFIG_X86_ESPFIX64 + testb $4,(SS-RIP)(%rsp) + jnz native_irq_return_ldt +#endif + +native_irq_return_iret: iretq + _ASM_EXTABLE(native_irq_return_iret, bad_iret) - .section __ex_table,"a" - .quad native_iret, bad_iret - .previous +#ifdef CONFIG_X86_ESPFIX64 +native_irq_return_ldt: + pushq_cfi %rax + pushq_cfi %rdi + SWAPGS + movq PER_CPU_VAR(espfix_waddr),%rdi + movq %rax,(0*8)(%rdi) /* RAX */ + movq (2*8)(%rsp),%rax /* RIP */ + movq %rax,(1*8)(%rdi) + movq (3*8)(%rsp),%rax /* CS */ + movq %rax,(2*8)(%rdi) + movq (4*8)(%rsp),%rax /* RFLAGS */ + movq %rax,(3*8)(%rdi) + movq (6*8)(%rsp),%rax /* SS */ + movq %rax,(5*8)(%rdi) + movq (5*8)(%rsp),%rax /* RSP */ + movq %rax,(4*8)(%rdi) + andl $0xffff0000,%eax + popq_cfi %rdi + orq PER_CPU_VAR(espfix_stack),%rax + SWAPGS + movq %rax,%rsp + popq_cfi %rax + jmp native_irq_return_iret #endif .section .fixup,"ax" @@ -903,11 +898,9 @@ retint_careful: jnc retint_signal TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_NONE) - pushq %rdi - CFI_ADJUST_CFA_OFFSET 8 - call schedule - popq %rdi - CFI_ADJUST_CFA_OFFSET -8 + pushq_cfi %rdi + SCHEDULE_USER + popq_cfi %rdi GET_THREAD_INFO(%rcx) DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF @@ -933,70 +926,109 @@ retint_signal: /* Returning to kernel space. Check if we need preemption */ /* rcx: threadinfo. interrupts off. */ ENTRY(retint_kernel) - cmpl $0,TI_preempt_count(%rcx) + cmpl $0,PER_CPU_VAR(__preempt_count) jnz retint_restore_args - bt $TIF_NEED_RESCHED,TI_flags(%rcx) - jnc retint_restore_args bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */ jnc retint_restore_args call preempt_schedule_irq jmp exit_intr #endif - CFI_ENDPROC END(common_interrupt) + /* + * If IRET takes a fault on the espfix stack, then we + * end up promoting it to a doublefault. In that case, + * modify the stack to make it look like we just entered + * the #GP handler from user space, similar to bad_iret. + */ +#ifdef CONFIG_X86_ESPFIX64 + ALIGN +__do_double_fault: + XCPT_FRAME 1 RDI+8 + movq RSP(%rdi),%rax /* Trap on the espfix stack? */ + sarq $PGDIR_SHIFT,%rax + cmpl $ESPFIX_PGD_ENTRY,%eax + jne do_double_fault /* No, just deliver the fault */ + cmpl $__KERNEL_CS,CS(%rdi) + jne do_double_fault + movq RIP(%rdi),%rax + cmpq $native_irq_return_iret,%rax + jne do_double_fault /* This shouldn't happen... */ + movq PER_CPU_VAR(kernel_stack),%rax + subq $(6*8-KERNEL_STACK_OFFSET),%rax /* Reset to original stack */ + movq %rax,RSP(%rdi) + movq $0,(%rax) /* Missing (lost) #GP error code */ + movq $general_protection,RIP(%rdi) + retq + CFI_ENDPROC +END(__do_double_fault) +#else +# define __do_double_fault do_double_fault +#endif + /* * APIC interrupts. */ -.macro apicinterrupt num sym do_sym +.macro apicinterrupt3 num sym do_sym ENTRY(\sym) INTR_FRAME - pushq $~(\num) - CFI_ADJUST_CFA_OFFSET 8 + ASM_CLAC + pushq_cfi $~(\num) +.Lcommon_\sym: interrupt \do_sym jmp ret_from_intr CFI_ENDPROC END(\sym) .endm +#ifdef CONFIG_TRACING +#define trace(sym) trace_##sym +#define smp_trace(sym) smp_trace_##sym + +.macro trace_apicinterrupt num sym +apicinterrupt3 \num trace(\sym) smp_trace(\sym) +.endm +#else +.macro trace_apicinterrupt num sym do_sym +.endm +#endif + +.macro apicinterrupt num sym do_sym +apicinterrupt3 \num \sym \do_sym +trace_apicinterrupt \num \sym +.endm + #ifdef CONFIG_SMP -apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \ +apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR \ irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt +apicinterrupt3 REBOOT_VECTOR \ + reboot_interrupt smp_reboot_interrupt #endif #ifdef CONFIG_X86_UV -apicinterrupt UV_BAU_MESSAGE \ +apicinterrupt3 UV_BAU_MESSAGE \ uv_bau_message_intr1 uv_bau_message_interrupt #endif apicinterrupt LOCAL_TIMER_VECTOR \ apic_timer_interrupt smp_apic_timer_interrupt -apicinterrupt GENERIC_INTERRUPT_VECTOR \ - generic_interrupt smp_generic_interrupt +apicinterrupt X86_PLATFORM_IPI_VECTOR \ + x86_platform_ipi smp_x86_platform_ipi -#ifdef CONFIG_SMP -apicinterrupt INVALIDATE_TLB_VECTOR_START+0 \ - invalidate_interrupt0 smp_invalidate_interrupt -apicinterrupt INVALIDATE_TLB_VECTOR_START+1 \ - invalidate_interrupt1 smp_invalidate_interrupt -apicinterrupt INVALIDATE_TLB_VECTOR_START+2 \ - invalidate_interrupt2 smp_invalidate_interrupt -apicinterrupt INVALIDATE_TLB_VECTOR_START+3 \ - invalidate_interrupt3 smp_invalidate_interrupt -apicinterrupt INVALIDATE_TLB_VECTOR_START+4 \ - invalidate_interrupt4 smp_invalidate_interrupt -apicinterrupt INVALIDATE_TLB_VECTOR_START+5 \ - invalidate_interrupt5 smp_invalidate_interrupt -apicinterrupt INVALIDATE_TLB_VECTOR_START+6 \ - invalidate_interrupt6 smp_invalidate_interrupt -apicinterrupt INVALIDATE_TLB_VECTOR_START+7 \ - invalidate_interrupt7 smp_invalidate_interrupt +#ifdef CONFIG_HAVE_KVM +apicinterrupt3 POSTED_INTR_VECTOR \ + kvm_posted_intr_ipi smp_kvm_posted_intr_ipi #endif +#ifdef CONFIG_X86_MCE_THRESHOLD apicinterrupt THRESHOLD_APIC_VECTOR \ - threshold_interrupt mce_threshold_interrupt + threshold_interrupt smp_threshold_interrupt +#endif + +#ifdef CONFIG_X86_THERMAL_VECTOR apicinterrupt THERMAL_APIC_VECTOR \ thermal_interrupt smp_thermal_interrupt +#endif #ifdef CONFIG_SMP apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \ @@ -1012,135 +1044,127 @@ apicinterrupt ERROR_APIC_VECTOR \ apicinterrupt SPURIOUS_APIC_VECTOR \ spurious_interrupt smp_spurious_interrupt +#ifdef CONFIG_IRQ_WORK +apicinterrupt IRQ_WORK_VECTOR \ + irq_work_interrupt smp_irq_work_interrupt +#endif + /* * Exception entry points. */ -.macro zeroentry sym do_sym -ENTRY(\sym) - INTR_FRAME - PARAVIRT_ADJUST_EXCEPTION_FRAME - pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ - subq $15*8,%rsp - CFI_ADJUST_CFA_OFFSET 15*8 - call error_entry - DEFAULT_FRAME 0 - movq %rsp,%rdi /* pt_regs pointer */ - xorl %esi,%esi /* no error code */ - call \do_sym - jmp error_exit /* %ebx: no swapgs flag */ - CFI_ENDPROC -END(\sym) -.endm +#define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8) -.macro paranoidzeroentry sym do_sym +.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 ENTRY(\sym) - INTR_FRAME - PARAVIRT_ADJUST_EXCEPTION_FRAME - pushq $-1 /* ORIG_RAX: no syscall to restart */ - CFI_ADJUST_CFA_OFFSET 8 - subq $15*8, %rsp - call save_paranoid - TRACE_IRQS_OFF - movq %rsp,%rdi /* pt_regs pointer */ - xorl %esi,%esi /* no error code */ - call \do_sym - jmp paranoid_exit /* %ebx: no swapgs flag */ - CFI_ENDPROC -END(\sym) -.endm + /* Sanity check */ + .if \shift_ist != -1 && \paranoid == 0 + .error "using shift_ist requires paranoid=1" + .endif -.macro paranoidzeroentry_ist sym do_sym ist -ENTRY(\sym) + .if \has_error_code + XCPT_FRAME + .else INTR_FRAME - PARAVIRT_ADJUST_EXCEPTION_FRAME - pushq $-1 /* ORIG_RAX: no syscall to restart */ - CFI_ADJUST_CFA_OFFSET 8 - subq $15*8, %rsp - call save_paranoid - TRACE_IRQS_OFF - movq %rsp,%rdi /* pt_regs pointer */ - xorl %esi,%esi /* no error code */ - PER_CPU(init_tss, %rbp) - subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp) - call \do_sym - addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp) - jmp paranoid_exit /* %ebx: no swapgs flag */ - CFI_ENDPROC -END(\sym) -.endm + .endif -.macro errorentry sym do_sym -ENTRY(\sym) - XCPT_FRAME + ASM_CLAC PARAVIRT_ADJUST_EXCEPTION_FRAME - subq $15*8,%rsp - CFI_ADJUST_CFA_OFFSET 15*8 - call error_entry - DEFAULT_FRAME 0 - movq %rsp,%rdi /* pt_regs pointer */ - movq ORIG_RAX(%rsp),%rsi /* get error code */ - movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */ - call \do_sym - jmp error_exit /* %ebx: no swapgs flag */ - CFI_ENDPROC -END(\sym) -.endm - /* error code is on the stack already */ -.macro paranoiderrorentry sym do_sym -ENTRY(\sym) - XCPT_FRAME - PARAVIRT_ADJUST_EXCEPTION_FRAME - subq $15*8,%rsp - CFI_ADJUST_CFA_OFFSET 15*8 + .ifeq \has_error_code + pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ + .endif + + subq $ORIG_RAX-R15, %rsp + CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 + + .if \paranoid call save_paranoid + .else + call error_entry + .endif + DEFAULT_FRAME 0 + + .if \paranoid + .if \shift_ist != -1 + TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */ + .else TRACE_IRQS_OFF + .endif + .endif + movq %rsp,%rdi /* pt_regs pointer */ + + .if \has_error_code movq ORIG_RAX(%rsp),%rsi /* get error code */ movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */ + .else + xorl %esi,%esi /* no error code */ + .endif + + .if \shift_ist != -1 + subq $EXCEPTION_STKSZ, INIT_TSS_IST(\shift_ist) + .endif + call \do_sym + + .if \shift_ist != -1 + addq $EXCEPTION_STKSZ, INIT_TSS_IST(\shift_ist) + .endif + + .if \paranoid jmp paranoid_exit /* %ebx: no swapgs flag */ + .else + jmp error_exit /* %ebx: no swapgs flag */ + .endif + CFI_ENDPROC END(\sym) .endm -zeroentry divide_error do_divide_error -zeroentry overflow do_overflow -zeroentry bounds do_bounds -zeroentry invalid_op do_invalid_op -zeroentry device_not_available do_device_not_available -paranoiderrorentry double_fault do_double_fault -zeroentry coprocessor_segment_overrun do_coprocessor_segment_overrun -errorentry invalid_TSS do_invalid_TSS -errorentry segment_not_present do_segment_not_present -zeroentry spurious_interrupt_bug do_spurious_interrupt_bug -zeroentry coprocessor_error do_coprocessor_error -errorentry alignment_check do_alignment_check -zeroentry simd_coprocessor_error do_simd_coprocessor_error +#ifdef CONFIG_TRACING +.macro trace_idtentry sym do_sym has_error_code:req +idtentry trace(\sym) trace(\do_sym) has_error_code=\has_error_code +idtentry \sym \do_sym has_error_code=\has_error_code +.endm +#else +.macro trace_idtentry sym do_sym has_error_code:req +idtentry \sym \do_sym has_error_code=\has_error_code +.endm +#endif + +idtentry divide_error do_divide_error has_error_code=0 +idtentry overflow do_overflow has_error_code=0 +idtentry bounds do_bounds has_error_code=0 +idtentry invalid_op do_invalid_op has_error_code=0 +idtentry device_not_available do_device_not_available has_error_code=0 +idtentry double_fault __do_double_fault has_error_code=1 paranoid=1 +idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0 +idtentry invalid_TSS do_invalid_TSS has_error_code=1 +idtentry segment_not_present do_segment_not_present has_error_code=1 +idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0 +idtentry coprocessor_error do_coprocessor_error has_error_code=0 +idtentry alignment_check do_alignment_check has_error_code=1 +idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0 + /* Reload gs selector with exception handling */ /* edi: new selector */ ENTRY(native_load_gs_index) CFI_STARTPROC - pushf - CFI_ADJUST_CFA_OFFSET 8 + pushfq_cfi DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI) SWAPGS gs_change: movl %edi,%gs 2: mfence /* workaround */ SWAPGS - popf - CFI_ADJUST_CFA_OFFSET -8 + popfq_cfi ret CFI_ENDPROC END(native_load_gs_index) - .section __ex_table,"a" - .align 8 - .quad gs_change,bad_gs - .previous + _ASM_EXTABLE(gs_change,bad_gs) .section .fixup,"ax" /* running with kernelgs */ bad_gs: @@ -1150,100 +1174,10 @@ bad_gs: jmp 2b .previous -/* - * Create a kernel thread. - * - * C extern interface: - * extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) - * - * asm input arguments: - * rdi: fn, rsi: arg, rdx: flags - */ -ENTRY(kernel_thread) - CFI_STARTPROC - FAKE_STACK_FRAME $child_rip - SAVE_ALL - - # rdi: flags, rsi: usp, rdx: will be &pt_regs - movq %rdx,%rdi - orq kernel_thread_flags(%rip),%rdi - movq $-1, %rsi - movq %rsp, %rdx - - xorl %r8d,%r8d - xorl %r9d,%r9d - - # clone now - call do_fork - movq %rax,RAX(%rsp) - xorl %edi,%edi - - /* - * It isn't worth to check for reschedule here, - * so internally to the x86_64 port you can rely on kernel_thread() - * not to reschedule the child before returning, this avoids the need - * of hacks for example to fork off the per-CPU idle tasks. - * [Hopefully no generic code relies on the reschedule -AK] - */ - RESTORE_ALL - UNFAKE_STACK_FRAME - ret - CFI_ENDPROC -END(kernel_thread) - -ENTRY(child_rip) - pushq $0 # fake return address - CFI_STARTPROC - /* - * Here we are in the child and the registers are set as they were - * at kernel_thread() invocation in the parent. - */ - movq %rdi, %rax - movq %rsi, %rdi - call *%rax - # exit - mov %eax, %edi - call do_exit - ud2 # padding for call trace - CFI_ENDPROC -END(child_rip) - -/* - * execve(). This function needs to use IRET, not SYSRET, to set up all state properly. - * - * C extern interface: - * extern long execve(char *name, char **argv, char **envp) - * - * asm input arguments: - * rdi: name, rsi: argv, rdx: envp - * - * We want to fallback into: - * extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs *regs) - * - * do_sys_execve asm fallback arguments: - * rdi: name, rsi: argv, rdx: envp, rcx: fake frame on the stack - */ -ENTRY(kernel_execve) - CFI_STARTPROC - FAKE_STACK_FRAME $0 - SAVE_ALL - movq %rsp,%rcx - call sys_execve - movq %rax, RAX(%rsp) - RESTORE_REST - testq %rax,%rax - je int_ret_from_sys_call - RESTORE_ARGS - UNFAKE_STACK_FRAME - ret - CFI_ENDPROC -END(kernel_execve) - /* Call softirq on interrupt stack. Interrupts are off. */ -ENTRY(call_softirq) +ENTRY(do_softirq_own_stack) CFI_STARTPROC - push %rbp - CFI_ADJUST_CFA_OFFSET 8 + pushq_cfi %rbp CFI_REL_OFFSET rbp,0 mov %rsp,%rbp CFI_DEF_CFA_REGISTER rbp @@ -1252,15 +1186,16 @@ ENTRY(call_softirq) push %rbp # backlink for old unwinder call __do_softirq leaveq + CFI_RESTORE rbp CFI_DEF_CFA_REGISTER rsp CFI_ADJUST_CFA_OFFSET -8 decl PER_CPU_VAR(irq_count) ret CFI_ENDPROC -END(call_softirq) +END(do_softirq_own_stack) #ifdef CONFIG_XEN -zeroentry xen_hypervisor_callback xen_do_hypervisor_callback +idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0 /* * A note on the "critical region" in our callback handler. @@ -1295,7 +1230,7 @@ ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) decl PER_CPU_VAR(irq_count) jmp error_exit CFI_ENDPROC -END(do_hypervisor_callback) +END(xen_do_hypervisor_callback) /* * Hypervisor uses this for application faults while it executes. @@ -1350,31 +1285,37 @@ ENTRY(xen_failsafe_callback) CFI_RESTORE r11 addq $0x30,%rsp CFI_ADJUST_CFA_OFFSET -0x30 - pushq_cfi $0 + pushq_cfi $-1 /* orig_ax = -1 => not a system call */ SAVE_ALL jmp error_exit CFI_ENDPROC END(xen_failsafe_callback) +apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ + xen_hvm_callback_vector xen_evtchn_do_upcall + #endif /* CONFIG_XEN */ -/* - * Some functions should be protected against kprobes - */ - .pushsection .kprobes.text, "ax" +#if IS_ENABLED(CONFIG_HYPERV) +apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ + hyperv_callback_vector hyperv_vector_handler +#endif /* CONFIG_HYPERV */ -paranoidzeroentry_ist debug do_debug DEBUG_STACK -paranoidzeroentry_ist int3 do_int3 DEBUG_STACK -paranoiderrorentry stack_segment do_stack_segment +idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK +idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK +idtentry stack_segment do_stack_segment has_error_code=1 paranoid=1 #ifdef CONFIG_XEN -zeroentry xen_debug do_debug -zeroentry xen_int3 do_int3 -errorentry xen_stack_segment do_stack_segment +idtentry xen_debug do_debug has_error_code=0 +idtentry xen_int3 do_int3 has_error_code=0 +idtentry xen_stack_segment do_stack_segment has_error_code=1 +#endif +idtentry general_protection do_general_protection has_error_code=1 +trace_idtentry page_fault do_page_fault has_error_code=1 +#ifdef CONFIG_KVM_GUEST +idtentry async_page_fault do_async_page_fault has_error_code=1 #endif -errorentry general_protection do_general_protection -errorentry page_fault do_page_fault #ifdef CONFIG_X86_MCE -paranoidzeroentry machine_check do_machine_check +idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(%rip) #endif /* @@ -1392,9 +1333,9 @@ paranoidzeroentry machine_check do_machine_check /* ebx: no swapgs flag */ ENTRY(paranoid_exit) - INTR_FRAME + DEFAULT_FRAME DISABLE_INTERRUPTS(CLBR_NONE) - TRACE_IRQS_OFF + TRACE_IRQS_OFF_DEBUG testl %ebx,%ebx /* swapgs needed? */ jnz paranoid_restore testl $3,CS(%rsp) @@ -1405,7 +1346,7 @@ paranoid_swapgs: RESTORE_ALL 8 jmp irq_return paranoid_restore: - TRACE_IRQS_IRETQ 0 + TRACE_IRQS_IRETQ_DEBUG 0 RESTORE_ALL 8 jmp irq_return paranoid_userspace: @@ -1430,7 +1371,7 @@ paranoid_userspace: paranoid_schedule: TRACE_IRQS_ON ENABLE_INTERRUPTS(CLBR_ANY) - call schedule + SCHEDULE_USER DISABLE_INTERRUPTS(CLBR_ANY) TRACE_IRQS_OFF jmp paranoid_userspace @@ -1469,7 +1410,6 @@ error_swapgs: error_sti: TRACE_IRQS_OFF ret - CFI_ENDPROC /* * There are two places in the kernel that can potentially fault with @@ -1480,15 +1420,21 @@ error_sti: */ error_kernelspace: incl %ebx - leaq irq_return(%rip),%rcx - cmpq %rcx,RIP+8(%rsp) - je error_swapgs - movl %ecx,%ecx /* zero extend */ + leaq native_irq_return_iret(%rip),%rcx cmpq %rcx,RIP+8(%rsp) je error_swapgs + movl %ecx,%eax /* zero extend */ + cmpq %rax,RIP+8(%rsp) + je bstep_iret cmpq $gs_change,RIP+8(%rsp) je error_swapgs jmp error_sti + +bstep_iret: + /* Fix truncated RIP */ + movq %rcx,RIP+8(%rsp) + jmp error_swapgs + CFI_ENDPROC END(error_entry) @@ -1511,60 +1457,257 @@ ENTRY(error_exit) CFI_ENDPROC END(error_exit) +/* + * Test if a given stack is an NMI stack or not. + */ + .macro test_in_nmi reg stack nmi_ret normal_ret + cmpq %\reg, \stack + ja \normal_ret + subq $EXCEPTION_STKSZ, %\reg + cmpq %\reg, \stack + jb \normal_ret + jmp \nmi_ret + .endm /* runs on exception stack */ ENTRY(nmi) INTR_FRAME PARAVIRT_ADJUST_EXCEPTION_FRAME - pushq_cfi $-1 - subq $15*8, %rsp - CFI_ADJUST_CFA_OFFSET 15*8 + /* + * We allow breakpoints in NMIs. If a breakpoint occurs, then + * the iretq it performs will take us out of NMI context. + * This means that we can have nested NMIs where the next + * NMI is using the top of the stack of the previous NMI. We + * can't let it execute because the nested NMI will corrupt the + * stack of the previous NMI. NMI handlers are not re-entrant + * anyway. + * + * To handle this case we do the following: + * Check the a special location on the stack that contains + * a variable that is set when NMIs are executing. + * The interrupted task's stack is also checked to see if it + * is an NMI stack. + * If the variable is not set and the stack is not the NMI + * stack then: + * o Set the special variable on the stack + * o Copy the interrupt frame into a "saved" location on the stack + * o Copy the interrupt frame into a "copy" location on the stack + * o Continue processing the NMI + * If the variable is set or the previous stack is the NMI stack: + * o Modify the "copy" location to jump to the repeate_nmi + * o return back to the first NMI + * + * Now on exit of the first NMI, we first clear the stack variable + * The NMI stack will tell any nested NMIs at that point that it is + * nested. Then we pop the stack normally with iret, and if there was + * a nested NMI that updated the copy interrupt stack frame, a + * jump will be made to the repeat_nmi code that will handle the second + * NMI. + */ + + /* Use %rdx as out temp variable throughout */ + pushq_cfi %rdx + CFI_REL_OFFSET rdx, 0 + + /* + * If %cs was not the kernel segment, then the NMI triggered in user + * space, which means it is definitely not nested. + */ + cmpl $__KERNEL_CS, 16(%rsp) + jne first_nmi + + /* + * Check the special variable on the stack to see if NMIs are + * executing. + */ + cmpl $1, -8(%rsp) + je nested_nmi + + /* + * Now test if the previous stack was an NMI stack. + * We need the double check. We check the NMI stack to satisfy the + * race when the first NMI clears the variable before returning. + * We check the variable because the first NMI could be in a + * breakpoint routine using a breakpoint stack. + */ + lea 6*8(%rsp), %rdx + test_in_nmi rdx, 4*8(%rsp), nested_nmi, first_nmi + CFI_REMEMBER_STATE + +nested_nmi: + /* + * Do nothing if we interrupted the fixup in repeat_nmi. + * It's about to repeat the NMI handler, so we are fine + * with ignoring this one. + */ + movq $repeat_nmi, %rdx + cmpq 8(%rsp), %rdx + ja 1f + movq $end_repeat_nmi, %rdx + cmpq 8(%rsp), %rdx + ja nested_nmi_out + +1: + /* Set up the interrupted NMIs stack to jump to repeat_nmi */ + leaq -1*8(%rsp), %rdx + movq %rdx, %rsp + CFI_ADJUST_CFA_OFFSET 1*8 + leaq -10*8(%rsp), %rdx + pushq_cfi $__KERNEL_DS + pushq_cfi %rdx + pushfq_cfi + pushq_cfi $__KERNEL_CS + pushq_cfi $repeat_nmi + + /* Put stack back */ + addq $(6*8), %rsp + CFI_ADJUST_CFA_OFFSET -6*8 + +nested_nmi_out: + popq_cfi %rdx + CFI_RESTORE rdx + + /* No need to check faults here */ + INTERRUPT_RETURN + + CFI_RESTORE_STATE +first_nmi: + /* + * Because nested NMIs will use the pushed location that we + * stored in rdx, we must keep that space available. + * Here's what our stack frame will look like: + * +-------------------------+ + * | original SS | + * | original Return RSP | + * | original RFLAGS | + * | original CS | + * | original RIP | + * +-------------------------+ + * | temp storage for rdx | + * +-------------------------+ + * | NMI executing variable | + * +-------------------------+ + * | copied SS | + * | copied Return RSP | + * | copied RFLAGS | + * | copied CS | + * | copied RIP | + * +-------------------------+ + * | Saved SS | + * | Saved Return RSP | + * | Saved RFLAGS | + * | Saved CS | + * | Saved RIP | + * +-------------------------+ + * | pt_regs | + * +-------------------------+ + * + * The saved stack frame is used to fix up the copied stack frame + * that a nested NMI may change to make the interrupted NMI iret jump + * to the repeat_nmi. The original stack frame and the temp storage + * is also used by nested NMIs and can not be trusted on exit. + */ + /* Do not pop rdx, nested NMIs will corrupt that part of the stack */ + movq (%rsp), %rdx + CFI_RESTORE rdx + + /* Set the NMI executing variable on the stack. */ + pushq_cfi $1 + + /* + * Leave room for the "copied" frame + */ + subq $(5*8), %rsp + CFI_ADJUST_CFA_OFFSET 5*8 + + /* Copy the stack frame to the Saved frame */ + .rept 5 + pushq_cfi 11*8(%rsp) + .endr + CFI_DEF_CFA_OFFSET SS+8-RIP + + /* Everything up to here is safe from nested NMIs */ + + /* + * If there was a nested NMI, the first NMI's iret will return + * here. But NMIs are still enabled and we can take another + * nested NMI. The nested NMI checks the interrupted RIP to see + * if it is between repeat_nmi and end_repeat_nmi, and if so + * it will just return, as we are about to repeat an NMI anyway. + * This makes it safe to copy to the stack frame that a nested + * NMI will update. + */ +repeat_nmi: + /* + * Update the stack variable to say we are still in NMI (the update + * is benign for the non-repeat case, where 1 was pushed just above + * to this very stack slot). + */ + movq $1, 10*8(%rsp) + + /* Make another copy, this one may be modified by nested NMIs */ + addq $(10*8), %rsp + CFI_ADJUST_CFA_OFFSET -10*8 + .rept 5 + pushq_cfi -6*8(%rsp) + .endr + subq $(5*8), %rsp + CFI_DEF_CFA_OFFSET SS+8-RIP +end_repeat_nmi: + + /* + * Everything below this point can be preempted by a nested + * NMI if the first NMI took an exception and reset our iret stack + * so that we repeat another NMI. + */ + pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ + subq $ORIG_RAX-R15, %rsp + CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 + /* + * Use save_paranoid to handle SWAPGS, but no need to use paranoid_exit + * as we should not be calling schedule in NMI context. + * Even with normal interrupts enabled. An NMI should not be + * setting NEED_RESCHED or anything that normal interrupts and + * exceptions might do. + */ call save_paranoid DEFAULT_FRAME 0 + + /* + * Save off the CR2 register. If we take a page fault in the NMI then + * it could corrupt the CR2 value. If the NMI preempts a page fault + * handler before it was able to read the CR2 register, and then the + * NMI itself takes a page fault, the page fault that was preempted + * will read the information from the NMI page fault and not the + * origin fault. Save it off and restore it if it changes. + * Use the r12 callee-saved register. + */ + movq %cr2, %r12 + /* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */ movq %rsp,%rdi movq $-1,%rsi call do_nmi -#ifdef CONFIG_TRACE_IRQFLAGS - /* paranoidexit; without TRACE_IRQS_OFF */ - /* ebx: no swapgs flag */ - DISABLE_INTERRUPTS(CLBR_NONE) + + /* Did the NMI take a page fault? Restore cr2 if it did */ + movq %cr2, %rcx + cmpq %rcx, %r12 + je 1f + movq %r12, %cr2 +1: + testl %ebx,%ebx /* swapgs needed? */ jnz nmi_restore - testl $3,CS(%rsp) - jnz nmi_userspace nmi_swapgs: SWAPGS_UNSAFE_STACK nmi_restore: - RESTORE_ALL 8 + /* Pop the extra iret frame at once */ + RESTORE_ALL 6*8 + + /* Clear the NMI executing stack variable */ + movq $0, 5*8(%rsp) jmp irq_return -nmi_userspace: - GET_THREAD_INFO(%rcx) - movl TI_flags(%rcx),%ebx - andl $_TIF_WORK_MASK,%ebx - jz nmi_swapgs - movq %rsp,%rdi /* &pt_regs */ - call sync_regs - movq %rax,%rsp /* switch stack for scheduling */ - testl $_TIF_NEED_RESCHED,%ebx - jnz nmi_schedule - movl %ebx,%edx /* arg3: thread flags */ - ENABLE_INTERRUPTS(CLBR_NONE) - xorl %esi,%esi /* arg2: oldset */ - movq %rsp,%rdi /* arg1: &pt_regs */ - call do_notify_resume - DISABLE_INTERRUPTS(CLBR_NONE) - jmp nmi_userspace -nmi_schedule: - ENABLE_INTERRUPTS(CLBR_ANY) - call schedule - DISABLE_INTERRUPTS(CLBR_ANY) - jmp nmi_userspace CFI_ENDPROC -#else - jmp paranoid_exit - CFI_ENDPROC -#endif END(nmi) ENTRY(ignore_sysret) @@ -1574,7 +1717,3 @@ ENTRY(ignore_sysret) CFI_ENDPROC END(ignore_sysret) -/* - * End of kprobes section - */ - .popsection |