diff options
Diffstat (limited to 'arch/x86/kernel/cpu/microcode/amd_early.c')
| -rw-r--r-- | arch/x86/kernel/cpu/microcode/amd_early.c | 395 |
1 files changed, 395 insertions, 0 deletions
diff --git a/arch/x86/kernel/cpu/microcode/amd_early.c b/arch/x86/kernel/cpu/microcode/amd_early.c new file mode 100644 index 00000000000..617a9e28424 --- /dev/null +++ b/arch/x86/kernel/cpu/microcode/amd_early.c @@ -0,0 +1,395 @@ +/* + * Copyright (C) 2013 Advanced Micro Devices, Inc. + * + * Author: Jacob Shin <jacob.shin@amd.com> + * Fixes: Borislav Petkov <bp@suse.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/earlycpio.h> +#include <linux/initrd.h> + +#include <asm/cpu.h> +#include <asm/setup.h> +#include <asm/microcode_amd.h> + +/* + * This points to the current valid container of microcode patches which we will + * save from the initrd before jettisoning its contents. + */ +static u8 *container; +static size_t container_size; + +static u32 ucode_new_rev; +u8 amd_ucode_patch[PATCH_MAX_SIZE]; +static u16 this_equiv_id; + +struct cpio_data ucode_cpio; + +/* + * Microcode patch container file is prepended to the initrd in cpio format. + * See Documentation/x86/early-microcode.txt + */ +static __initdata char ucode_path[] = "kernel/x86/microcode/AuthenticAMD.bin"; + +static struct cpio_data __init find_ucode_in_initrd(void) +{ + long offset = 0; + char *path; + void *start; + size_t size; + +#ifdef CONFIG_X86_32 + struct boot_params *p; + + /* + * On 32-bit, early load occurs before paging is turned on so we need + * to use physical addresses. + */ + p = (struct boot_params *)__pa_nodebug(&boot_params); + path = (char *)__pa_nodebug(ucode_path); + start = (void *)p->hdr.ramdisk_image; + size = p->hdr.ramdisk_size; +#else + path = ucode_path; + start = (void *)(boot_params.hdr.ramdisk_image + PAGE_OFFSET); + size = boot_params.hdr.ramdisk_size; +#endif + + return find_cpio_data(path, start, size, &offset); +} + +static size_t compute_container_size(u8 *data, u32 total_size) +{ + size_t size = 0; + u32 *header = (u32 *)data; + + if (header[0] != UCODE_MAGIC || + header[1] != UCODE_EQUIV_CPU_TABLE_TYPE || /* type */ + header[2] == 0) /* size */ + return size; + + size = header[2] + CONTAINER_HDR_SZ; + total_size -= size; + data += size; + + while (total_size) { + u16 patch_size; + + header = (u32 *)data; + + if (header[0] != UCODE_UCODE_TYPE) + break; + + /* + * Sanity-check patch size. + */ + patch_size = header[1]; + if (patch_size > PATCH_MAX_SIZE) + break; + + size += patch_size + SECTION_HDR_SIZE; + data += patch_size + SECTION_HDR_SIZE; + total_size -= patch_size + SECTION_HDR_SIZE; + } + + return size; +} + +/* + * Early load occurs before we can vmalloc(). So we look for the microcode + * patch container file in initrd, traverse equivalent cpu table, look for a + * matching microcode patch, and update, all in initrd memory in place. + * When vmalloc() is available for use later -- on 64-bit during first AP load, + * and on 32-bit during save_microcode_in_initrd_amd() -- we can call + * load_microcode_amd() to save equivalent cpu table and microcode patches in + * kernel heap memory. + */ +static void apply_ucode_in_initrd(void *ucode, size_t size) +{ + struct equiv_cpu_entry *eq; + size_t *cont_sz; + u32 *header; + u8 *data, **cont; + u16 eq_id = 0; + int offset, left; + u32 rev, eax, ebx, ecx, edx; + u32 *new_rev; + +#ifdef CONFIG_X86_32 + new_rev = (u32 *)__pa_nodebug(&ucode_new_rev); + cont_sz = (size_t *)__pa_nodebug(&container_size); + cont = (u8 **)__pa_nodebug(&container); +#else + new_rev = &ucode_new_rev; + cont_sz = &container_size; + cont = &container; +#endif + + data = ucode; + left = size; + header = (u32 *)data; + + /* find equiv cpu table */ + if (header[0] != UCODE_MAGIC || + header[1] != UCODE_EQUIV_CPU_TABLE_TYPE || /* type */ + header[2] == 0) /* size */ + return; + + eax = 0x00000001; + ecx = 0; + native_cpuid(&eax, &ebx, &ecx, &edx); + + while (left > 0) { + eq = (struct equiv_cpu_entry *)(data + CONTAINER_HDR_SZ); + + *cont = data; + + /* Advance past the container header */ + offset = header[2] + CONTAINER_HDR_SZ; + data += offset; + left -= offset; + + eq_id = find_equiv_id(eq, eax); + if (eq_id) { + this_equiv_id = eq_id; + *cont_sz = compute_container_size(*cont, left + offset); + + /* + * truncate how much we need to iterate over in the + * ucode update loop below + */ + left = *cont_sz - offset; + break; + } + + /* + * support multiple container files appended together. if this + * one does not have a matching equivalent cpu entry, we fast + * forward to the next container file. + */ + while (left > 0) { + header = (u32 *)data; + if (header[0] == UCODE_MAGIC && + header[1] == UCODE_EQUIV_CPU_TABLE_TYPE) + break; + + offset = header[1] + SECTION_HDR_SIZE; + data += offset; + left -= offset; + } + + /* mark where the next microcode container file starts */ + offset = data - (u8 *)ucode; + ucode = data; + } + + if (!eq_id) { + *cont = NULL; + *cont_sz = 0; + return; + } + + /* find ucode and update if needed */ + + native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, eax); + + while (left > 0) { + struct microcode_amd *mc; + + header = (u32 *)data; + if (header[0] != UCODE_UCODE_TYPE || /* type */ + header[1] == 0) /* size */ + break; + + mc = (struct microcode_amd *)(data + SECTION_HDR_SIZE); + + if (eq_id == mc->hdr.processor_rev_id && rev < mc->hdr.patch_id) { + + if (!__apply_microcode_amd(mc)) { + rev = mc->hdr.patch_id; + *new_rev = rev; + + /* save ucode patch */ + memcpy(amd_ucode_patch, mc, + min_t(u32, header[1], PATCH_MAX_SIZE)); + } + } + + offset = header[1] + SECTION_HDR_SIZE; + data += offset; + left -= offset; + } +} + +void __init load_ucode_amd_bsp(void) +{ + struct cpio_data cp; + void **data; + size_t *size; + +#ifdef CONFIG_X86_32 + data = (void **)__pa_nodebug(&ucode_cpio.data); + size = (size_t *)__pa_nodebug(&ucode_cpio.size); +#else + data = &ucode_cpio.data; + size = &ucode_cpio.size; +#endif + + cp = find_ucode_in_initrd(); + if (!cp.data) + return; + + *data = cp.data; + *size = cp.size; + + apply_ucode_in_initrd(cp.data, cp.size); +} + +#ifdef CONFIG_X86_32 +/* + * On 32-bit, since AP's early load occurs before paging is turned on, we + * cannot traverse cpu_equiv_table and pcache in kernel heap memory. So during + * cold boot, AP will apply_ucode_in_initrd() just like the BSP. During + * save_microcode_in_initrd_amd() BSP's patch is copied to amd_ucode_patch, + * which is used upon resume from suspend. + */ +void load_ucode_amd_ap(void) +{ + struct microcode_amd *mc; + size_t *usize; + void **ucode; + + mc = (struct microcode_amd *)__pa(amd_ucode_patch); + if (mc->hdr.patch_id && mc->hdr.processor_rev_id) { + __apply_microcode_amd(mc); + return; + } + + ucode = (void *)__pa_nodebug(&container); + usize = (size_t *)__pa_nodebug(&container_size); + + if (!*ucode || !*usize) + return; + + apply_ucode_in_initrd(*ucode, *usize); +} + +static void __init collect_cpu_sig_on_bsp(void *arg) +{ + unsigned int cpu = smp_processor_id(); + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + + uci->cpu_sig.sig = cpuid_eax(0x00000001); +} + +static void __init get_bsp_sig(void) +{ + unsigned int bsp = boot_cpu_data.cpu_index; + struct ucode_cpu_info *uci = ucode_cpu_info + bsp; + + if (!uci->cpu_sig.sig) + smp_call_function_single(bsp, collect_cpu_sig_on_bsp, NULL, 1); +} +#else +void load_ucode_amd_ap(void) +{ + unsigned int cpu = smp_processor_id(); + struct ucode_cpu_info *uci = ucode_cpu_info + cpu; + struct equiv_cpu_entry *eq; + struct microcode_amd *mc; + u32 rev, eax; + u16 eq_id; + + /* Exit if called on the BSP. */ + if (!cpu) + return; + + if (!container) + return; + + rdmsr(MSR_AMD64_PATCH_LEVEL, rev, eax); + + uci->cpu_sig.rev = rev; + uci->cpu_sig.sig = eax; + + eax = cpuid_eax(0x00000001); + eq = (struct equiv_cpu_entry *)(container + CONTAINER_HDR_SZ); + + eq_id = find_equiv_id(eq, eax); + if (!eq_id) + return; + + if (eq_id == this_equiv_id) { + mc = (struct microcode_amd *)amd_ucode_patch; + + if (mc && rev < mc->hdr.patch_id) { + if (!__apply_microcode_amd(mc)) + ucode_new_rev = mc->hdr.patch_id; + } + + } else { + if (!ucode_cpio.data) + return; + + /* + * AP has a different equivalence ID than BSP, looks like + * mixed-steppings silicon so go through the ucode blob anew. + */ + apply_ucode_in_initrd(ucode_cpio.data, ucode_cpio.size); + } +} +#endif + +int __init save_microcode_in_initrd_amd(void) +{ + unsigned long cont; + enum ucode_state ret; + u32 eax; + + if (!container) + return -EINVAL; + +#ifdef CONFIG_X86_32 + get_bsp_sig(); + cont = (unsigned long)container; +#else + /* + * We need the physical address of the container for both bitness since + * boot_params.hdr.ramdisk_image is a physical address. + */ + cont = __pa(container); +#endif + + /* + * Take into account the fact that the ramdisk might get relocated and + * therefore we need to recompute the container's position in virtual + * memory space. + */ + if (relocated_ramdisk) + container = (u8 *)(__va(relocated_ramdisk) + + (cont - boot_params.hdr.ramdisk_image)); + + if (ucode_new_rev) + pr_info("microcode: updated early to new patch_level=0x%08x\n", + ucode_new_rev); + + eax = cpuid_eax(0x00000001); + eax = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff); + + ret = load_microcode_amd(eax, container, container_size); + if (ret != UCODE_OK) + return -EINVAL; + + /* + * This will be freed any msec now, stash patches for the current + * family and switch to patch cache for cpu hotplug, etc later. + */ + container = NULL; + container_size = 0; + + return 0; +} |