aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/cpu/cyrix.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/cpu/cyrix.c')
-rw-r--r--arch/x86/kernel/cpu/cyrix.c90
1 files changed, 48 insertions, 42 deletions
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 898a5a2002e..aaf152e7963 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -1,12 +1,11 @@
-#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <asm/dma.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/processor-cyrix.h>
#include <asm/processor-flags.h>
-#include <asm/timer.h>
+#include <linux/timer.h>
#include <asm/pci-direct.h>
#include <asm/tsc.h>
@@ -15,7 +14,7 @@
/*
* Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
*/
-static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
{
unsigned char ccr2, ccr3;
@@ -44,7 +43,7 @@ static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
}
}
-static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
{
unsigned long flags;
@@ -59,25 +58,25 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
* Actually since bugs.h doesn't even reference this perhaps someone should
* fix the documentation ???
*/
-static unsigned char Cx86_dir0_msb __cpuinitdata = 0;
+static unsigned char Cx86_dir0_msb = 0;
-static char Cx86_model[][9] __cpuinitdata = {
+static const char Cx86_model[][9] = {
"Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
"M II ", "Unknown"
};
-static char Cx486_name[][5] __cpuinitdata = {
+static const char Cx486_name[][5] = {
"SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
"SRx2", "DRx2"
};
-static char Cx486S_name[][4] __cpuinitdata = {
+static const char Cx486S_name[][4] = {
"S", "S2", "Se", "S2e"
};
-static char Cx486D_name[][4] __cpuinitdata = {
+static const char Cx486D_name[][4] = {
"DX", "DX2", "?", "?", "?", "DX4"
};
-static char Cx86_cb[] __cpuinitdata = "?.5x Core/Bus Clock";
-static char cyrix_model_mult1[] __cpuinitdata = "12??43";
-static char cyrix_model_mult2[] __cpuinitdata = "12233445";
+static char Cx86_cb[] = "?.5x Core/Bus Clock";
+static const char cyrix_model_mult1[] = "12??43";
+static const char cyrix_model_mult2[] = "12233445";
/*
* Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
@@ -87,7 +86,7 @@ static char cyrix_model_mult2[] __cpuinitdata = "12233445";
* FIXME: our newer udelay uses the tsc. We don't need to frob with SLOP
*/
-static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c)
+static void check_cx686_slop(struct cpuinfo_x86 *c)
{
unsigned long flags;
@@ -112,7 +111,7 @@ static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c)
}
-static void __cpuinit set_cx86_reorder(void)
+static void set_cx86_reorder(void)
{
u8 ccr3;
@@ -121,43 +120,43 @@ static void __cpuinit set_cx86_reorder(void)
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* Load/Store Serialize to mem access disable (=reorder it) */
- setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
+ setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80);
/* set load/store serialize from 1GB to 4GB */
ccr3 |= 0xe0;
setCx86(CX86_CCR3, ccr3);
}
-static void __cpuinit set_cx86_memwb(void)
+static void set_cx86_memwb(void)
{
printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
/* CCR2 bit 2: unlock NW bit */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04);
/* set 'Not Write-through' */
write_cr0(read_cr0() | X86_CR0_NW);
/* CCR2 bit 2: lock NW bit and set WT1 */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14);
}
/*
* Configure later MediaGX and/or Geode processor.
*/
-static void __cpuinit geode_configure(void)
+static void geode_configure(void)
{
unsigned long flags;
u8 ccr3;
local_irq_save(flags);
/* Suspend on halt power saving and enable #SUSP pin */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* FPU fast, DTE cache, Mem bypass */
- setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
+ setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38);
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
set_cx86_memwb();
@@ -166,7 +165,7 @@ static void __cpuinit geode_configure(void)
local_irq_restore(flags);
}
-static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
+static void early_init_cyrix(struct cpuinfo_x86 *c)
{
unsigned char dir0, dir0_msn, dir1 = 0;
@@ -185,7 +184,7 @@ static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
}
}
-static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
+static void init_cyrix(struct cpuinfo_x86 *c)
{
unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
char *buf = c->x86_model_id;
@@ -249,7 +248,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
/* Emulate MTRRs using Cyrix's ARRs. */
set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
/* 6x86's contain this bug */
- c->coma_bug = 1;
+ set_cpu_bug(c, X86_BUG_COMA);
break;
case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
@@ -282,7 +281,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
* The 5510/5520 companion chips have a funky PIT.
*/
if (vendor == PCI_VENDOR_ID_CYRIX &&
- (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520))
+ (device == PCI_DEVICE_ID_CYRIX_5510 ||
+ device == PCI_DEVICE_ID_CYRIX_5520))
mark_tsc_unstable("cyrix 5510/5520 detected");
}
#endif
@@ -291,7 +291,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
/* GXm supports extended cpuid levels 'ala' AMD */
if (c->cpuid_level == 2) {
/* Enable cxMMX extensions (GX1 Datasheet 54) */
- setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
+ setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1);
/*
* GXm : 0x30 ... 0x5f GXm datasheet 51
@@ -299,9 +299,9 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
* ? : 0x7x
* GX1 : 0x8x GX1 datasheet 56
*/
- if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f))
+ if ((0x30 <= dir1 && dir1 <= 0x6f) ||
+ (0x80 <= dir1 && dir1 <= 0x8f))
geode_configure();
- get_model_name(c); /* get CPU marketing name */
return;
} else { /* MediaGX */
Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
@@ -314,9 +314,10 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
if (dir1 > 7) {
dir0_msn++; /* M II */
/* Enable MMX extensions (App note 108) */
- setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+ setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1);
} else {
- c->coma_bug = 1; /* 6x86MX, it has the bug. */
+ /* A 6x86MX - it has the bug. */
+ set_cpu_bug(c, X86_BUG_COMA);
}
tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
@@ -331,7 +332,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
switch (dir0_lsn) {
case 0xd: /* either a 486SLC or DLC w/o DEVID */
dir0_msn = 0;
- p = Cx486_name[(c->hard_math) ? 1 : 0];
+ p = Cx486_name[(cpu_has_fpu ? 1 : 0)];
break;
case 0xe: /* a 486S A step */
@@ -354,7 +355,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
/*
* Handle National Semiconductor branded processors
*/
-static void __cpuinit init_nsc(struct cpuinfo_x86 *c)
+static void init_nsc(struct cpuinfo_x86 *c)
{
/*
* There may be GX1 processors in the wild that are branded
@@ -372,7 +373,7 @@ static void __cpuinit init_nsc(struct cpuinfo_x86 *c)
/* Handle the GX (Formally known as the GX2) */
if (c->x86 == 5 && c->x86_model == 5)
- display_cacheinfo(c);
+ cpu_detect_cache_sizes(c);
else
init_cyrix(c);
}
@@ -403,7 +404,7 @@ static inline int test_cyrix_52div(void)
return (unsigned char) (test >> 8) == 0x02;
}
-static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
+static void cyrix_identify(struct cpuinfo_x86 *c)
{
/* Detect Cyrix with disabled CPUID */
if (c->x86 == 4 && test_cyrix_52div()) {
@@ -428,28 +429,33 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
local_irq_save(flags);
ccr3 = getCx86(CX86_CCR3);
- setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
- setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80); /* enable cpuid */
- setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+ /* enable MAPEN */
+ setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
+ /* enable cpuid */
+ setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
+ /* disable MAPEN */
+ setCx86(CX86_CCR3, ccr3);
local_irq_restore(flags);
}
}
}
-static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
+static const struct cpu_dev cyrix_cpu_dev = {
.c_vendor = "Cyrix",
.c_ident = { "CyrixInstead" },
.c_early_init = early_init_cyrix,
.c_init = init_cyrix,
.c_identify = cyrix_identify,
+ .c_x86_vendor = X86_VENDOR_CYRIX,
};
-cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev);
+cpu_dev_register(cyrix_cpu_dev);
-static struct cpu_dev nsc_cpu_dev __cpuinitdata = {
+static const struct cpu_dev nsc_cpu_dev = {
.c_vendor = "NSC",
.c_ident = { "Geode by NSC" },
.c_init = init_nsc,
+ .c_x86_vendor = X86_VENDOR_NSC,
};
-cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev);
+cpu_dev_register(nsc_cpu_dev);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-05 20:51:01 +0000