1 files changed, 56 insertions, 96 deletions

diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index 99d2fe01608..cceb352c968 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -52,29 +52,9 @@ static int __init print_ipi_mode(void)
 }
 late_initcall(print_ipi_mode);
 
-void __init default_setup_apic_routing(void)
+static int default_x86_32_early_logical_apicid(int cpu)
 {
-	int version = apic_version[boot_cpu_physical_apicid];
-
-	if (num_possible_cpus() > 8) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (!APIC_XAPIC(version)) {
-				def_to_bigsmp = 0;
-				break;
-			}
-			/* If P4 and above fall through */
-		case X86_VENDOR_AMD:
-			def_to_bigsmp = 1;
-		}
-	}
-
-#ifdef CONFIG_X86_BIGSMP
-	generic_bigsmp_probe();
-#endif
-
-	if (apic->setup_apic_routing)
-		apic->setup_apic_routing();
+	return 1 << cpu;
 }
 
 static void setup_apic_flat_routing(void)
@@ -86,32 +66,18 @@ static void setup_apic_flat_routing(void)
 #endif
 }
 
-static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
-{
-	/*
-	 * Careful. Some cpus do not strictly honor the set of cpus
-	 * specified in the interrupt destination when using lowest
-	 * priority interrupt delivery mode.
-	 *
-	 * In particular there was a hyperthreading cpu observed to
-	 * deliver interrupts to the wrong hyperthread when only one
-	 * hyperthread was specified in the interrupt desitination.
-	 */
-	cpumask_clear(retmask);
-	cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
-}
-
 /* should be called last. */
 static int probe_default(void)
 {
 	return 1;
 }
 
-struct apic apic_default = {
+static struct apic apic_default = {
 
 	.name				= "default",
 	.probe				= probe_default,
 	.acpi_madt_oem_check		= NULL,
+	.apic_id_valid			= default_apic_id_valid,
 	.apic_id_registered		= default_apic_id_registered,
 
 	.irq_delivery_mode		= dest_LowestPrio,
@@ -124,14 +90,12 @@ struct apic apic_default = {
 	.check_apicid_used		= default_check_apicid_used,
 	.check_apicid_present		= default_check_apicid_present,
 
-	.vector_allocation_domain	= default_vector_allocation_domain,
+	.vector_allocation_domain	= flat_vector_allocation_domain,
 	.init_apic_ldr			= default_init_apic_ldr,
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
 	.setup_apic_routing		= setup_apic_flat_routing,
 	.multi_timer_check		= NULL,
-	.apicid_to_node			= default_apicid_to_node,
-	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 	.apicid_to_cpu_present		= physid_set_mask_of_physid,
 	.setup_portio_remap		= NULL,
@@ -144,8 +108,7 @@ struct apic apic_default = {
 	.set_apic_id			= NULL,
 	.apic_id_mask			= 0x0F << 24,
 
-	.cpu_mask_to_apicid		= default_cpu_mask_to_apicid,
-	.cpu_mask_to_apicid_and		= default_cpu_mask_to_apicid_and,
+	.cpu_mask_to_apicid_and		= flat_cpu_mask_to_apicid_and,
 
 	.send_IPI_mask			= default_send_IPI_mask_logical,
 	.send_IPI_mask_allbutself	= default_send_IPI_mask_allbutself_logical,
@@ -156,57 +119,37 @@ struct apic apic_default = {
 	.trampoline_phys_low		= DEFAULT_TRAMPOLINE_PHYS_LOW,
 	.trampoline_phys_high		= DEFAULT_TRAMPOLINE_PHYS_HIGH,
 
-	.wait_for_init_deassert		= default_wait_for_init_deassert,
-
+	.wait_for_init_deassert		= true,
 	.smp_callin_clear_local_apic	= NULL,
 	.inquire_remote_apic		= default_inquire_remote_apic,
 
 	.read				= native_apic_mem_read,
 	.write				= native_apic_mem_write,
+	.eoi_write			= native_apic_mem_write,
 	.icr_read			= native_apic_icr_read,
 	.icr_write			= native_apic_icr_write,
 	.wait_icr_idle			= native_apic_wait_icr_idle,
 	.safe_wait_icr_idle		= native_safe_apic_wait_icr_idle,
+
+	.x86_32_early_logical_apicid	= default_x86_32_early_logical_apicid,
 };
 
-extern struct apic apic_numaq;
-extern struct apic apic_summit;
-extern struct apic apic_bigsmp;
-extern struct apic apic_es7000;
-extern struct apic apic_es7000_cluster;
+apic_driver(apic_default);
 
 struct apic *apic = &apic_default;
 EXPORT_SYMBOL_GPL(apic);
 
-static struct apic *apic_probe[] __initdata = {
-#ifdef CONFIG_X86_NUMAQ
-	&apic_numaq,
-#endif
-#ifdef CONFIG_X86_SUMMIT
-	&apic_summit,
-#endif
-#ifdef CONFIG_X86_BIGSMP
-	&apic_bigsmp,
-#endif
-#ifdef CONFIG_X86_ES7000
-	&apic_es7000,
-	&apic_es7000_cluster,
-#endif
-	&apic_default,	/* must be last */
-	NULL,
-};
-
 static int cmdline_apic __initdata;
 static int __init parse_apic(char *arg)
 {
-	int i;
+	struct apic **drv;
 
 	if (!arg)
 		return -EINVAL;
 
-	for (i = 0; apic_probe[i]; i++) {
-		if (!strcmp(apic_probe[i]->name, arg)) {
-			apic = apic_probe[i];
+	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+		if (!strcmp((*drv)->name, arg)) {
+			apic = *drv;
 			cmdline_apic = 1;
 			return 0;
 		}
@@ -217,38 +160,55 @@ static int __init parse_apic(char *arg)
 }
 early_param("apic", parse_apic);
 
-void __init generic_bigsmp_probe(void)
+void __init default_setup_apic_routing(void)
 {
+	int version = apic_version[boot_cpu_physical_apicid];
+
+	if (num_possible_cpus() > 8) {
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_INTEL:
+			if (!APIC_XAPIC(version)) {
+				def_to_bigsmp = 0;
+				break;
+			}
+			/* If P4 and above fall through */
+		case X86_VENDOR_AMD:
+			def_to_bigsmp = 1;
+		}
+	}
+
 #ifdef CONFIG_X86_BIGSMP
 	/*
-	 * This routine is used to switch to bigsmp mode when
+	 * This is used to switch to bigsmp mode when
 	 * - There is no apic= option specified by the user
 	 * - generic_apic_probe() has chosen apic_default as the sub_arch
 	 * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
 	 */
 
-	if (!cmdline_apic && apic == &apic_default) {
-		if (apic_bigsmp.probe()) {
-			apic = &apic_bigsmp;
-			printk(KERN_INFO "Overriding APIC driver with %s\n",
-			       apic->name);
-		}
-	}
+	if (!cmdline_apic && apic == &apic_default)
+		generic_bigsmp_probe();
 #endif
+
+	if (apic->setup_apic_routing)
+		apic->setup_apic_routing();
+
+	if (x86_platform.apic_post_init)
+		x86_platform.apic_post_init();
 }
 
 void __init generic_apic_probe(void)
 {
 	if (!cmdline_apic) {
-		int i;
-		for (i = 0; apic_probe[i]; i++) {
-			if (apic_probe[i]->probe()) {
-				apic = apic_probe[i];
+		struct apic **drv;
+
+		for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+			if ((*drv)->probe()) {
+				apic = *drv;
 				break;
 			}
 		}
 		/* Not visible without early console */
-		if (!apic_probe[i])
+		if (drv == __apicdrivers_end)
 			panic("Didn't find an APIC driver");
 	}
 	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
@@ -259,16 +219,16 @@ void __init generic_apic_probe(void)
 int __init
 generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 {
-	int i;
+	struct apic **drv;
 
-	for (i = 0; apic_probe[i]; ++i) {
-		if (!apic_probe[i]->mps_oem_check)
+	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+		if (!((*drv)->mps_oem_check))
 			continue;
-		if (!apic_probe[i]->mps_oem_check(mpc, oem, productid))
+		if (!(*drv)->mps_oem_check(mpc, oem, productid))
 			continue;
 
 		if (!cmdline_apic) {
-			apic = apic_probe[i];
+			apic = *drv;
 			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
 			       apic->name);
 		}
@@ -279,16 +239,16 @@ generic_mps_oem_check(struct mpc_table *mpc, char *oem, char *productid)
 
 int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	int i;
+	struct apic **drv;
 
-	for (i = 0; apic_probe[i]; ++i) {
-		if (!apic_probe[i]->acpi_madt_oem_check)
+	for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) {
+		if (!(*drv)->acpi_madt_oem_check)
 			continue;
-		if (!apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id))
+		if (!(*drv)->acpi_madt_oem_check(oem_id, oem_table_id))
 			continue;
 
 		if (!cmdline_apic) {
-			apic = apic_probe[i];
+			apic = *drv;
 			printk(KERN_INFO "Switched to APIC driver `%s'.\n",
 			       apic->name);
 		}