diff options
Diffstat (limited to 'arch/x86/kernel/acpi')
22 files changed, 372 insertions, 1161 deletions
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile index fd5ca97a2ad..163b2258147 100644 --- a/arch/x86/kernel/acpi/Makefile +++ b/arch/x86/kernel/acpi/Makefile @@ -1,14 +1,7 @@ -subdir- := realmode - obj-$(CONFIG_ACPI) += boot.o -obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_rm.o wakeup_$(BITS).o +obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_$(BITS).o ifneq ($(CONFIG_ACPI_PROCESSOR),) -obj-y += cstate.o processor.o +obj-y += cstate.o endif -$(obj)/wakeup_rm.o: $(obj)/realmode/wakeup.bin - -$(obj)/realmode/wakeup.bin: FORCE - $(Q)$(MAKE) $(build)=$(obj)/realmode - diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 631086159c5..86281ffb96d 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -31,10 +31,12 @@ #include <linux/module.h> #include <linux/dmi.h> #include <linux/irq.h> +#include <linux/slab.h> #include <linux/bootmem.h> #include <linux/ioport.h> #include <linux/pci.h> +#include <asm/pci_x86.h> #include <asm/pgtable.h> #include <asm/io_apic.h> #include <asm/apic.h> @@ -42,38 +44,31 @@ #include <asm/mpspec.h> #include <asm/smp.h> +#include "sleep.h" /* To include x86_acpi_suspend_lowlevel */ static int __initdata acpi_force = 0; -u32 acpi_rsdt_forced; -#ifdef CONFIG_ACPI -int acpi_disabled = 0; -#else -int acpi_disabled = 1; -#endif +int acpi_disabled; EXPORT_SYMBOL(acpi_disabled); #ifdef CONFIG_X86_64 # include <asm/proto.h> #endif /* X86 */ -#define BAD_MADT_ENTRY(entry, end) ( \ - (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ - ((struct acpi_subtable_header *)entry)->length < sizeof(*entry)) - #define PREFIX "ACPI: " int acpi_noirq; /* skip ACPI IRQ initialization */ int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */ EXPORT_SYMBOL(acpi_pci_disabled); -int acpi_ht __initdata = 1; /* enable HT */ int acpi_lapic; int acpi_ioapic; int acpi_strict; +int acpi_disable_cmcff; u8 acpi_sci_flags __initdata; int acpi_sci_override_gsi __initdata; int acpi_skip_timer_override __initdata; int acpi_use_timer_override __initdata; +int acpi_fix_pin2_polarity __initdata; #ifdef CONFIG_X86_LOCAL_APIC static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; @@ -95,98 +90,72 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC; /* - * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END, - * to map the target physical address. The problem is that set_fixmap() - * provides a single page, and it is possible that the page is not - * sufficient. - * By using this area, we can map up to MAX_IO_APICS pages temporarily, - * i.e. until the next __va_range() call. - * - * Important Safety Note: The fixed I/O APIC page numbers are *subtracted* - * from the fixed base. That's why we start at FIX_IO_APIC_BASE_END and - * count idx down while incrementing the phys address. + * ISA irqs by default are the first 16 gsis but can be + * any gsi as specified by an interrupt source override. */ -char *__init __acpi_map_table(unsigned long phys, unsigned long size) -{ - - if (!phys || !size) - return NULL; +static u32 isa_irq_to_gsi[NR_IRQS_LEGACY] __read_mostly = { + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 +}; - return early_ioremap(phys, size); -} -void __init __acpi_unmap_table(char *map, unsigned long size) +static unsigned int gsi_to_irq(unsigned int gsi) { - if (!map || !size) - return; - - early_iounmap(map, size); -} - -#ifdef CONFIG_PCI_MMCONFIG + unsigned int irq = gsi + NR_IRQS_LEGACY; + unsigned int i; -static int acpi_mcfg_64bit_base_addr __initdata = FALSE; - -/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -struct acpi_mcfg_allocation *pci_mmcfg_config; -int pci_mmcfg_config_num; + for (i = 0; i < NR_IRQS_LEGACY; i++) { + if (isa_irq_to_gsi[i] == gsi) { + return i; + } + } -static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) -{ - if (!strcmp(mcfg->header.oem_id, "SGI")) - acpi_mcfg_64bit_base_addr = TRUE; + /* Provide an identity mapping of gsi == irq + * except on truly weird platforms that have + * non isa irqs in the first 16 gsis. + */ + if (gsi >= NR_IRQS_LEGACY) + irq = gsi; + else + irq = gsi_top + gsi; - return 0; + return irq; } -int __init acpi_parse_mcfg(struct acpi_table_header *header) +static u32 irq_to_gsi(int irq) { - struct acpi_table_mcfg *mcfg; - unsigned long i; - int config_size; + unsigned int gsi; - if (!header) - return -EINVAL; + if (irq < NR_IRQS_LEGACY) + gsi = isa_irq_to_gsi[irq]; + else if (irq < gsi_top) + gsi = irq; + else if (irq < (gsi_top + NR_IRQS_LEGACY)) + gsi = irq - gsi_top; + else + gsi = 0xffffffff; - mcfg = (struct acpi_table_mcfg *)header; - - /* how many config structures do we have */ - pci_mmcfg_config_num = 0; - i = header->length - sizeof(struct acpi_table_mcfg); - while (i >= sizeof(struct acpi_mcfg_allocation)) { - ++pci_mmcfg_config_num; - i -= sizeof(struct acpi_mcfg_allocation); - }; - if (pci_mmcfg_config_num == 0) { - printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); - return -ENODEV; - } + return gsi; +} - config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); - pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); - if (!pci_mmcfg_config) { - printk(KERN_WARNING PREFIX - "No memory for MCFG config tables\n"); - return -ENOMEM; - } +/* + * This is just a simple wrapper around early_ioremap(), + * with sanity checks for phys == 0 and size == 0. + */ +char *__init __acpi_map_table(unsigned long phys, unsigned long size) +{ - memcpy(pci_mmcfg_config, &mcfg[1], config_size); + if (!phys || !size) + return NULL; - acpi_mcfg_oem_check(mcfg); + return early_ioremap(phys, size); +} - for (i = 0; i < pci_mmcfg_config_num; ++i) { - if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && - !acpi_mcfg_64bit_base_addr) { - printk(KERN_ERR PREFIX - "MMCONFIG not in low 4GB of memory\n"); - kfree(pci_mmcfg_config); - pci_mmcfg_config_num = 0; - return -ENODEV; - } - } +void __init __acpi_unmap_table(char *map, unsigned long size) +{ + if (!map || !size) + return; - return 0; + early_iounmap(map, size); } -#endif /* CONFIG_PCI_MMCONFIG */ #ifdef CONFIG_X86_LOCAL_APIC static int __init acpi_parse_madt(struct acpi_table_header *table) @@ -215,25 +184,39 @@ static int __init acpi_parse_madt(struct acpi_table_header *table) return 0; } -static void __cpuinit acpi_register_lapic(int id, u8 enabled) +/** + * acpi_register_lapic - register a local apic and generates a logic cpu number + * @id: local apic id to register + * @enabled: this cpu is enabled or not + * + * Returns the logic cpu number which maps to the local apic + */ +static int acpi_register_lapic(int id, u8 enabled) { unsigned int ver = 0; + if (id >= MAX_LOCAL_APIC) { + printk(KERN_INFO PREFIX "skipped apicid that is too big\n"); + return -EINVAL; + } + if (!enabled) { ++disabled_cpus; - return; + return -EINVAL; } if (boot_cpu_physical_apicid != -1U) ver = apic_version[boot_cpu_physical_apicid]; - generic_processor_info(id, ver); + return generic_processor_info(id, ver); } static int __init acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end) { struct acpi_madt_local_x2apic *processor = NULL; + int apic_id; + u8 enabled; processor = (struct acpi_madt_local_x2apic *)header; @@ -242,6 +225,8 @@ acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end) acpi_table_print_madt_entry(header); + apic_id = processor->local_apic_id; + enabled = processor->lapic_flags & ACPI_MADT_ENABLED; #ifdef CONFIG_X86_X2APIC /* * We need to register disabled CPU as well to permit @@ -250,8 +235,10 @@ acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end) * to not preallocating memory for all NR_CPUS * when we use CPU hotplug. */ - acpi_register_lapic(processor->local_apic_id, /* APIC ID */ - processor->lapic_flags & ACPI_MADT_ENABLED); + if (!apic->apic_id_valid(apic_id) && enabled) + printk(KERN_WARNING PREFIX "x2apic entry ignored\n"); + else + acpi_register_lapic(apic_id, enabled); #else printk(KERN_WARNING PREFIX "x2apic entry ignored\n"); #endif @@ -380,7 +367,7 @@ acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end) /* * Parse Interrupt Source Override for the ACPI SCI */ -static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) +static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger, u32 gsi) { if (trigger == 0) /* compatible SCI trigger is level */ trigger = 3; @@ -400,7 +387,7 @@ static void __init acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) * If GSI is < 16, this will update its flags, * else it will create a new mp_irqs[] entry. */ - mp_override_legacy_irq(gsi, polarity, trigger, gsi); + mp_override_legacy_irq(bus_irq, polarity, trigger, gsi); /* * stash over-ride to indicate we've been here @@ -424,16 +411,24 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header, acpi_table_print_madt_entry(header); if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) { - acpi_sci_ioapic_setup(intsrc->global_irq, + acpi_sci_ioapic_setup(intsrc->source_irq, intsrc->inti_flags & ACPI_MADT_POLARITY_MASK, - (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2); + (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2, + intsrc->global_irq); return 0; } - if (acpi_skip_timer_override && - intsrc->source_irq == 0 && intsrc->global_irq == 2) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); - return 0; + if (intsrc->source_irq == 0) { + if (acpi_skip_timer_override) { + printk(PREFIX "BIOS IRQ0 override ignored.\n"); + return 0; + } + + if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity + && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { + intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK; + printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n"); + } } mp_override_legacy_irq(intsrc->source_irq, @@ -515,122 +510,142 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { - *irq = gsi; + *irq = gsi_to_irq(gsi); + +#ifdef CONFIG_X86_IO_APIC + if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) + setup_IO_APIC_irq_extra(gsi); +#endif + return 0; } +EXPORT_SYMBOL_GPL(acpi_gsi_to_irq); -/* - * success: return IRQ number (>=0) - * failure: return < 0 - */ -int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) +int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi) { - unsigned int irq; - unsigned int plat_gsi = gsi; + if (isa_irq >= 16) + return -1; + *gsi = irq_to_gsi(isa_irq); + return 0; +} +static int acpi_register_gsi_pic(struct device *dev, u32 gsi, + int trigger, int polarity) +{ #ifdef CONFIG_PCI /* * Make sure all (legacy) PCI IRQs are set as level-triggered. */ - if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) { - if (trigger == ACPI_LEVEL_SENSITIVE) - eisa_set_level_irq(gsi); - } + if (trigger == ACPI_LEVEL_SENSITIVE) + eisa_set_level_irq(gsi); #endif + return gsi; +} + +static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi, + int trigger, int polarity) +{ #ifdef CONFIG_X86_IO_APIC - if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) { - plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity); - } + gsi = mp_register_gsi(dev, gsi, trigger, polarity); #endif - acpi_gsi_to_irq(plat_gsi, &irq); - return irq; + + return gsi; } +int (*__acpi_register_gsi)(struct device *dev, u32 gsi, + int trigger, int polarity) = acpi_register_gsi_pic; + +#ifdef CONFIG_ACPI_SLEEP +int (*acpi_suspend_lowlevel)(void) = x86_acpi_suspend_lowlevel; +#else +int (*acpi_suspend_lowlevel)(void); +#endif + /* - * ACPI based hotplug support for CPU + * success: return IRQ number (>=0) + * failure: return < 0 */ -#ifdef CONFIG_ACPI_HOTPLUG_CPU - -static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu) +int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) { - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; - union acpi_object *obj; - struct acpi_madt_local_apic *lapic; - cpumask_var_t tmp_map, new_map; - u8 physid; - int cpu; - int retval = -ENOMEM; - - if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) - return -EINVAL; + unsigned int irq; + unsigned int plat_gsi = gsi; - if (!buffer.length || !buffer.pointer) - return -EINVAL; + plat_gsi = (*__acpi_register_gsi)(dev, gsi, trigger, polarity); + irq = gsi_to_irq(plat_gsi); - obj = buffer.pointer; - if (obj->type != ACPI_TYPE_BUFFER || - obj->buffer.length < sizeof(*lapic)) { - kfree(buffer.pointer); - return -EINVAL; - } + return irq; +} +EXPORT_SYMBOL_GPL(acpi_register_gsi); - lapic = (struct acpi_madt_local_apic *)obj->buffer.pointer; +void acpi_unregister_gsi(u32 gsi) +{ +} +EXPORT_SYMBOL_GPL(acpi_unregister_gsi); - if (lapic->header.type != ACPI_MADT_TYPE_LOCAL_APIC || - !(lapic->lapic_flags & ACPI_MADT_ENABLED)) { - kfree(buffer.pointer); - return -EINVAL; - } +void __init acpi_set_irq_model_pic(void) +{ + acpi_irq_model = ACPI_IRQ_MODEL_PIC; + __acpi_register_gsi = acpi_register_gsi_pic; + acpi_ioapic = 0; +} - physid = lapic->id; +void __init acpi_set_irq_model_ioapic(void) +{ + acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC; + __acpi_register_gsi = acpi_register_gsi_ioapic; + acpi_ioapic = 1; +} - kfree(buffer.pointer); - buffer.length = ACPI_ALLOCATE_BUFFER; - buffer.pointer = NULL; +/* + * ACPI based hotplug support for CPU + */ +#ifdef CONFIG_ACPI_HOTPLUG_CPU +#include <acpi/processor.h> - if (!alloc_cpumask_var(&tmp_map, GFP_KERNEL)) - goto out; +static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid) +{ +#ifdef CONFIG_ACPI_NUMA + int nid; - if (!alloc_cpumask_var(&new_map, GFP_KERNEL)) - goto free_tmp_map; + nid = acpi_get_node(handle); + if (nid != -1) { + set_apicid_to_node(physid, nid); + numa_set_node(cpu, nid); + } +#endif +} - cpumask_copy(tmp_map, cpu_present_mask); - acpi_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED); +static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) +{ + int cpu; - /* - * If mp_register_lapic successfully generates a new logical cpu - * number, then the following will get us exactly what was mapped - */ - cpumask_andnot(new_map, cpu_present_mask, tmp_map); - if (cpumask_empty(new_map)) { - printk ("Unable to map lapic to logical cpu number\n"); - retval = -EINVAL; - goto free_new_map; + cpu = acpi_register_lapic(physid, ACPI_MADT_ENABLED); + if (cpu < 0) { + pr_info(PREFIX "Unable to map lapic to logical cpu number\n"); + return cpu; } - cpu = cpumask_first(new_map); + acpi_processor_set_pdc(handle); + acpi_map_cpu2node(handle, cpu, physid); *pcpu = cpu; - retval = 0; - -free_new_map: - free_cpumask_var(new_map); -free_tmp_map: - free_cpumask_var(tmp_map); -out: - return retval; + return 0; } /* wrapper to silence section mismatch warning */ -int __ref acpi_map_lsapic(acpi_handle handle, int *pcpu) +int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu) { - return _acpi_map_lsapic(handle, pcpu); + return _acpi_map_lsapic(handle, physid, pcpu); } EXPORT_SYMBOL(acpi_map_lsapic); int acpi_unmap_lsapic(int cpu) { +#ifdef CONFIG_ACPI_NUMA + set_apicid_to_node(per_cpu(x86_cpu_to_apicid, cpu), NUMA_NO_NODE); +#endif + per_cpu(x86_cpu_to_apicid, cpu) = -1; set_cpu_present(cpu, false); num_processors--; @@ -675,7 +690,7 @@ static int __init acpi_parse_sbf(struct acpi_table_header *table) #ifdef CONFIG_HPET_TIMER #include <asm/hpet.h> -static struct __initdata resource *hpet_res; +static struct resource *hpet_res __initdata; static int __init acpi_parse_hpet(struct acpi_table_header *table) { @@ -694,6 +709,7 @@ static int __init acpi_parse_hpet(struct acpi_table_header *table) } hpet_address = hpet_tbl->address.address; + hpet_blockid = hpet_tbl->sequence; /* * Some broken BIOSes advertise HPET at 0x0. We really do not @@ -801,18 +817,6 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table) * returns 0 on success, < 0 on error */ -static void __init acpi_register_lapic_address(unsigned long address) -{ - mp_lapic_addr = address; - - set_fixmap_nocache(FIX_APIC_BASE, address); - if (boot_cpu_physical_apicid == -1U) { - boot_cpu_physical_apicid = read_apic_id(); - apic_version[boot_cpu_physical_apicid] = - GET_APIC_VERSION(apic_read(APIC_LVR)); - } -} - static int __init early_acpi_parse_madt_lapic_addr_ovr(void) { int count; @@ -834,7 +838,7 @@ static int __init early_acpi_parse_madt_lapic_addr_ovr(void) return count; } - acpi_register_lapic_address(acpi_lapic_addr); + register_lapic_address(acpi_lapic_addr); return count; } @@ -861,16 +865,16 @@ static int __init acpi_parse_madt_lapic_entries(void) return count; } - acpi_register_lapic_address(acpi_lapic_addr); + register_lapic_address(acpi_lapic_addr); count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, - acpi_parse_sapic, MAX_APICS); + acpi_parse_sapic, MAX_LOCAL_APIC); if (!count) { x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC, - acpi_parse_x2apic, MAX_APICS); + acpi_parse_x2apic, MAX_LOCAL_APIC); count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, - acpi_parse_lapic, MAX_APICS); + acpi_parse_lapic, MAX_LOCAL_APIC); } if (!count && !x2count) { printk(KERN_ERR PREFIX "No LAPIC entries present\n"); @@ -899,159 +903,6 @@ static int __init acpi_parse_madt_lapic_entries(void) #ifdef CONFIG_X86_IO_APIC #define MP_ISA_BUS 0 -#ifdef CONFIG_X86_ES7000 -extern int es7000_plat; -#endif - -static struct { - int gsi_base; - int gsi_end; -} mp_ioapic_routing[MAX_IO_APICS]; - -int mp_find_ioapic(int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; -} - -int mp_find_ioapic_pin(int ioapic, int gsi) -{ - if (WARN_ON(ioapic == -1)) - return -1; - if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end)) - return -1; - - return gsi - mp_ioapic_routing[ioapic].gsi_base; -} - -static u8 __init uniq_ioapic_id(u8 id) -{ -#ifdef CONFIG_X86_32 - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return io_apic_get_unique_id(nr_ioapics, id); - else - return id; -#else - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -#endif -} - -static int bad_ioapic(unsigned long address) -{ - if (nr_ioapics >= MAX_IO_APICS) { - printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " - "(found %d)\n", MAX_IO_APICS, nr_ioapics); - panic("Recompile kernel with bigger MAX_IO_APICS!\n"); - } - if (!address) { - printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" - " found in table, skipping!\n"); - return 1; - } - return 0; -} - -void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) -{ - int idx = 0; - - if (bad_ioapic(address)) - return; - - idx = nr_ioapics; - - mp_ioapics[idx].type = MP_IOAPIC; - mp_ioapics[idx].flags = MPC_APIC_USABLE; - mp_ioapics[idx].apicaddr = address; - - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].apicid = uniq_ioapic_id(id); - mp_ioapics[idx].apicver = io_apic_get_version(idx); - - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].apicid, - mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr, - mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} - -int __init acpi_probe_gsi(void) -{ - int idx; - int gsi; - int max_gsi = 0; - - if (acpi_disabled) - return 0; - - if (!acpi_ioapic) - return 0; - - max_gsi = 0; - for (idx = 0; idx < nr_ioapics; idx++) { - gsi = mp_ioapic_routing[idx].gsi_end; - - if (gsi > max_gsi) - max_gsi = gsi; - } - - return max_gsi + 1; -} - -static void assign_to_mp_irq(struct mpc_intsrc *m, - struct mpc_intsrc *mp_irq) -{ - memcpy(mp_irq, m, sizeof(struct mpc_intsrc)); -} - -static int mp_irq_cmp(struct mpc_intsrc *mp_irq, - struct mpc_intsrc *m) -{ - return memcmp(mp_irq, m, sizeof(struct mpc_intsrc)); -} - -static void save_mp_irq(struct mpc_intsrc *m) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) { - if (!mp_irq_cmp(&mp_irqs[i], m)) - return; - } - - assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]); - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); -} - void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) { int ioapic; @@ -1079,20 +930,20 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) mp_irq.irqflag = (trigger << 2) | polarity; mp_irq.srcbus = MP_ISA_BUS; mp_irq.srcbusirq = bus_irq; /* IRQ */ - mp_irq.dstapic = mp_ioapics[ioapic].apicid; /* APIC ID */ + mp_irq.dstapic = mpc_ioapic_id(ioapic); /* APIC ID */ mp_irq.dstirq = pin; /* INTIN# */ - save_mp_irq(&mp_irq); + mp_save_irq(&mp_irq); + + isa_irq_to_gsi[bus_irq] = gsi; } void __init mp_config_acpi_legacy_irqs(void) { int i; - int ioapic; - unsigned int dstapic; struct mpc_intsrc mp_irq; -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) +#ifdef CONFIG_EISA /* * Fabricate the legacy ISA bus (bus #31). */ @@ -1101,28 +952,28 @@ void __init mp_config_acpi_legacy_irqs(void) set_bit(MP_ISA_BUS, mp_bus_not_pci); pr_debug("Bus #%d is ISA\n", MP_ISA_BUS); -#ifdef CONFIG_X86_ES7000 - /* - * Older generations of ES7000 have no legacy identity mappings - */ - if (es7000_plat == 1) - return; -#endif - - /* - * Locate the IOAPIC that manages the ISA IRQs (0-15). - */ - ioapic = mp_find_ioapic(0); - if (ioapic < 0) - return; - dstapic = mp_ioapics[ioapic].apicid; - /* * Use the default configuration for the IRQs 0-15. Unless * overridden by (MADT) interrupt source override entries. */ for (i = 0; i < 16; i++) { + int ioapic, pin; + unsigned int dstapic; int idx; + u32 gsi; + + /* Locate the gsi that irq i maps to. */ + if (acpi_isa_irq_to_gsi(i, &gsi)) + continue; + + /* + * Locate the IOAPIC that manages the ISA IRQ. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + continue; + pin = mp_find_ioapic_pin(ioapic, gsi); + dstapic = mpc_ioapic_id(ioapic); for (idx = 0; idx < mp_irq_entries; idx++) { struct mpc_intsrc *irq = mp_irqs + idx; @@ -1132,7 +983,7 @@ void __init mp_config_acpi_legacy_irqs(void) break; /* Do we already have a mapping for this IOAPIC pin */ - if (irq->dstapic == dstapic && irq->dstirq == i) + if (irq->dstapic == dstapic && irq->dstirq == pin) break; } @@ -1147,9 +998,9 @@ void __init mp_config_acpi_legacy_irqs(void) mp_irq.dstapic = dstapic; mp_irq.irqtype = mp_INT; mp_irq.srcbusirq = i; /* Identity mapped */ - mp_irq.dstirq = i; + mp_irq.dstirq = pin; - save_mp_irq(&mp_irq); + mp_save_irq(&mp_irq); } } @@ -1166,9 +1017,7 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger, if (!acpi_ioapic) return 0; - if (!dev) - return 0; - if (dev->bus != &pci_bus_type) + if (!dev || !dev_is_pci(dev)) return 0; pdev = to_pci_dev(dev); @@ -1183,10 +1032,10 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger, mp_irq.srcbus = number; mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); ioapic = mp_find_ioapic(gsi); - mp_irq.dstapic = mp_ioapics[ioapic].apicid; + mp_irq.dstapic = mpc_ioapic_id(ioapic); mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); - save_mp_irq(&mp_irq); + mp_save_irq(&mp_irq); #endif return 0; } @@ -1196,6 +1045,7 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) int ioapic; int ioapic_pin; struct io_apic_irq_attr irq_attr; + int ret; if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; @@ -1212,14 +1062,9 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) ioapic_pin = mp_find_ioapic_pin(ioapic, gsi); -#ifdef CONFIG_X86_32 - if (ioapic_renumber_irq) - gsi = ioapic_renumber_irq(ioapic, gsi); -#endif - if (ioapic_pin > MP_MAX_IOAPIC_PIN) { printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapics[ioapic].apicid, + "%d-%d\n", mpc_ioapic_id(ioapic), ioapic_pin); return gsi; } @@ -1230,7 +1075,9 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin, trigger == ACPI_EDGE_SENSITIVE ? 0 : 1, polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - io_apic_set_pci_routing(dev, gsi, &irq_attr); + ret = io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr); + if (ret < 0) + gsi = INT_MIN; return gsi; } @@ -1249,9 +1096,8 @@ static int __init acpi_parse_madt_ioapic_entries(void) * If MPS is present, it will handle them, * otherwise the system will stay in PIC mode */ - if (acpi_disabled || acpi_noirq) { + if (acpi_disabled || acpi_noirq) return -ENODEV; - } if (!cpu_has_apic) return -ENODEV; @@ -1291,9 +1137,10 @@ static int __init acpi_parse_madt_ioapic_entries(void) * pretend we got one so we can set the SCI flags. */ if (!acpi_sci_override_gsi) - acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0); + acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0, + acpi_gbl_FADT.sci_interrupt); - /* Fill in identity legacy mapings where no override */ + /* Fill in identity legacy mappings where no override */ mp_config_acpi_legacy_irqs(); count = @@ -1355,20 +1202,14 @@ static void __init acpi_process_madt(void) if (!error) { acpi_lapic = 1; -#ifdef CONFIG_X86_BIGSMP - generic_bigsmp_probe(); -#endif /* * Parse MADT IO-APIC entries */ error = acpi_parse_madt_ioapic_entries(); if (!error) { - acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC; - acpi_ioapic = 1; + acpi_set_irq_model_ioapic(); smp_found_config = 1; - if (apic->setup_apic_routing) - apic->setup_apic_routing(); } } if (error == -EINVAL) { @@ -1439,34 +1280,12 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d) } /* - * Limit ACPI to CPU enumeration for HT - */ -static int __init force_acpi_ht(const struct dmi_system_id *d) -{ - if (!acpi_force) { - printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", - d->ident); - disable_acpi(); - acpi_ht = 1; - } else { - printk(KERN_NOTICE - "Warning: acpi=force overrules DMI blacklist: acpi=ht\n"); - } - return 0; -} - -/* - * Force ignoring BIOS IRQ0 pin2 override + * Force ignoring BIOS IRQ0 override */ static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d) { - /* - * The ati_ixp4x0_rev() early PCI quirk should have set - * the acpi_skip_timer_override flag already: - */ if (!acpi_skip_timer_override) { - WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n"); - pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", + pr_notice("%s detected: Ignoring BIOS IRQ0 override\n", d->ident); acpi_skip_timer_override = 1; } @@ -1491,98 +1310,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { }, /* - * Boxes that need acpi=ht - */ - { - .callback = force_acpi_ht, - .ident = "FSC Primergy T850", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "HP VISUALIZE NT Workstation", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "Compaq Workstation W8000", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), - DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "ASUS P4B266", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4B266"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "ASUS P2B-DS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "ASUS CUR-DLS", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "ABIT i440BX-W83977", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"), - DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM Bladecenter", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM eServer xSeries 360", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 330", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"), - }, - }, - { - .callback = force_acpi_ht, - .ident = "IBM eserver xSeries 440", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), - DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"), - }, - }, - - /* * Boxes that need ACPI PCI IRQ routing disabled */ { @@ -1652,7 +1379,7 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { * is enabled. This input is incorrectly designated the * ISA IRQ 0 via an interrupt source override even though * it is wired to the output of the master 8259A and INTIN0 - * is not connected at all. Force ignoring BIOS IRQ0 pin2 + * is not connected at all. Force ignoring BIOS IRQ0 * override in that cases. */ { @@ -1687,6 +1414,14 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"), }, }, + { + .callback = dmi_ignore_irq0_timer_override, + .ident = "FUJITSU SIEMENS", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"), + }, + }, {} }; @@ -1707,32 +1442,24 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { * if acpi_blacklisted() acpi_disabled = 1; * acpi_irq_model=... * ... - * - * return value: (currently ignored) - * 0: success - * !0: failure */ -int __init acpi_boot_table_init(void) +void __init acpi_boot_table_init(void) { - int error; - dmi_check_system(acpi_dmi_table); /* * If acpi_disabled, bail out - * One exception: acpi=ht continues far enough to enumerate LAPICs */ - if (acpi_disabled && !acpi_ht) - return 1; + if (acpi_disabled) + return; /* * Initialize the ACPI boot-time table parser. */ - error = acpi_table_init(); - if (error) { + if (acpi_table_init()) { disable_acpi(); - return error; + return; } acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf); @@ -1740,27 +1467,23 @@ int __init acpi_boot_table_init(void) /* * blacklist may disable ACPI entirely */ - error = acpi_blacklisted(); - if (error) { + if (acpi_blacklisted()) { if (acpi_force) { printk(KERN_WARNING PREFIX "acpi=force override\n"); } else { printk(KERN_WARNING PREFIX "Disabling ACPI support\n"); disable_acpi(); - return error; + return; } } - - return 0; } int __init early_acpi_boot_init(void) { /* * If acpi_disabled, bail out - * One exception: acpi=ht continues far enough to enumerate LAPICs */ - if (acpi_disabled && !acpi_ht) + if (acpi_disabled) return 1; /* @@ -1778,9 +1501,8 @@ int __init acpi_boot_init(void) /* * If acpi_disabled, bail out - * One exception: acpi=ht continues far enough to enumerate LAPICs */ - if (acpi_disabled && !acpi_ht) + if (acpi_disabled) return 1; acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf); @@ -1797,6 +1519,9 @@ int __init acpi_boot_init(void) acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet); + if (!acpi_noirq) + x86_init.pci.init = pci_acpi_init; + return 0; } @@ -1812,26 +1537,27 @@ static int __init parse_acpi(char *arg) /* acpi=force to over-ride black-list */ else if (strcmp(arg, "force") == 0) { acpi_force = 1; - acpi_ht = 1; acpi_disabled = 0; } /* acpi=strict disables out-of-spec workarounds */ else if (strcmp(arg, "strict") == 0) { acpi_strict = 1; } - /* Limit ACPI just to boot-time to enable HT */ - else if (strcmp(arg, "ht") == 0) { - if (!acpi_force) - disable_acpi(); - acpi_ht = 1; - } /* acpi=rsdt use RSDT instead of XSDT */ else if (strcmp(arg, "rsdt") == 0) { - acpi_rsdt_forced = 1; + acpi_gbl_do_not_use_xsdt = TRUE; } /* "acpi=noirq" disables ACPI interrupt routing */ else if (strcmp(arg, "noirq") == 0) { acpi_noirq_set(); + } + /* "acpi=copy_dsdt" copys DSDT */ + else if (strcmp(arg, "copy_dsdt") == 0) { + acpi_gbl_copy_dsdt_locally = 1; + } + /* "acpi=nocmcff" disables FF mode for corrected errors */ + else if (strcmp(arg, "nocmcff") == 0) { + acpi_disable_cmcff = 1; } else { /* Core will printk when we return error. */ return -EINVAL; @@ -1922,3 +1648,9 @@ int __acpi_release_global_lock(unsigned int *lock) } while (unlikely (val != old)); return old & 0x1; } + +void __init arch_reserve_mem_area(acpi_physical_address addr, size_t size) +{ + e820_add_region(addr, size, E820_ACPI); + update_e820(); +} diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c index bbbe4bbb6f3..4b28159e042 100644 --- a/arch/x86/kernel/acpi/cstate.c +++ b/arch/x86/kernel/acpi/cstate.c @@ -13,6 +13,8 @@ #include <acpi/processor.h> #include <asm/acpi.h> +#include <asm/mwait.h> +#include <asm/special_insns.h> /* * Initialize bm_flags based on the CPU cache properties @@ -34,12 +36,22 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, flags->bm_check = 1; else if (c->x86_vendor == X86_VENDOR_INTEL) { /* - * Today all CPUs that support C3 share cache. - * TBD: This needs to look at cache shared map, once - * multi-core detection patch makes to the base. + * Today all MP CPUs that support C3 share cache. + * And caches should not be flushed by software while + * entering C3 type state. */ flags->bm_check = 1; } + + /* + * On all recent Intel platforms, ARB_DISABLE is a nop. + * So, set bm_control to zero to indicate that ARB_DISABLE + * is not required while entering C3 type state on + * P4, Core and beyond CPUs + */ + if (c->x86_vendor == X86_VENDOR_INTEL && + (c->x86 > 0xf || (c->x86 == 6 && c->x86_model >= 0x0f))) + flags->bm_control = 0; } EXPORT_SYMBOL(acpi_processor_power_init_bm_check); @@ -51,20 +63,10 @@ struct cstate_entry { unsigned int ecx; } states[ACPI_PROCESSOR_MAX_POWER]; }; -static struct cstate_entry *cpu_cstate_entry; /* per CPU ptr */ +static struct cstate_entry __percpu *cpu_cstate_entry; /* per CPU ptr */ static short mwait_supported[ACPI_PROCESSOR_MAX_POWER]; -#define MWAIT_SUBSTATE_MASK (0xf) -#define MWAIT_CSTATE_MASK (0xf) -#define MWAIT_SUBSTATE_SIZE (4) - -#define CPUID_MWAIT_LEAF (5) -#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1) -#define CPUID5_ECX_INTERRUPT_BREAK (0x2) - -#define MWAIT_ECX_INTERRUPT_BREAK (0x1) - #define NATIVE_CSTATE_BEYOND_HALT (2) static long acpi_processor_ffh_cstate_probe_cpu(void *_cx) @@ -85,7 +87,9 @@ static long acpi_processor_ffh_cstate_probe_cpu(void *_cx) num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK; retval = 0; - if (num_cstate_subtype < (cx->address & MWAIT_SUBSTATE_MASK)) { + /* If the HW does not support any sub-states in this C-state */ + if (num_cstate_subtype == 0) { + pr_warn(FW_BUG "ACPI MWAIT C-state 0x%x not supported by HW (0x%x)\n", cx->address, edx_part); retval = -1; goto out; } @@ -135,6 +139,15 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu, percpu_entry->states[cx->index].eax = cx->address; percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK; } + + /* + * For _CST FFH on Intel, if GAS.access_size bit 1 is cleared, + * then we should skip checking BM_STS for this C-state. + * ref: "Intel Processor Vendor-Specific ACPI Interface Specification" + */ + if ((c->x86_vendor == X86_VENDOR_INTEL) && !(reg->access_size & 0x2)) + cx->bm_sts_skip = 1; + return retval; } EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe); diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c deleted file mode 100644 index 7c074eec39f..00000000000 --- a/arch/x86/kernel/acpi/processor.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * Copyright (C) 2005 Intel Corporation - * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> - * - Added _PDC for platforms with Intel CPUs - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/acpi.h> - -#include <acpi/processor.h> -#include <asm/acpi.h> - -static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c) -{ - struct acpi_object_list *obj_list; - union acpi_object *obj; - u32 *buf; - - /* allocate and initialize pdc. It will be used later. */ - obj_list = kmalloc(sizeof(struct acpi_object_list), GFP_KERNEL); - if (!obj_list) { - printk(KERN_ERR "Memory allocation error\n"); - return; - } - - obj = kmalloc(sizeof(union acpi_object), GFP_KERNEL); - if (!obj) { - printk(KERN_ERR "Memory allocation error\n"); - kfree(obj_list); - return; - } - - buf = kmalloc(12, GFP_KERNEL); - if (!buf) { - printk(KERN_ERR "Memory allocation error\n"); - kfree(obj); - kfree(obj_list); - return; - } - - buf[0] = ACPI_PDC_REVISION_ID; - buf[1] = 1; - buf[2] = ACPI_PDC_C_CAPABILITY_SMP; - - /* - * The default of PDC_SMP_T_SWCOORD bit is set for intel x86 cpu so - * that OSPM is capable of native ACPI throttling software - * coordination using BIOS supplied _TSD info. - */ - buf[2] |= ACPI_PDC_SMP_T_SWCOORD; - if (cpu_has(c, X86_FEATURE_EST)) - buf[2] |= ACPI_PDC_EST_CAPABILITY_SWSMP; - - if (cpu_has(c, X86_FEATURE_ACPI)) - buf[2] |= ACPI_PDC_T_FFH; - - /* - * If mwait/monitor is unsupported, C2/C3_FFH will be disabled - */ - if (!cpu_has(c, X86_FEATURE_MWAIT)) - buf[2] &= ~(ACPI_PDC_C_C2C3_FFH); - - obj->type = ACPI_TYPE_BUFFER; - obj->buffer.length = 12; - obj->buffer.pointer = (u8 *) buf; - obj_list->count = 1; - obj_list->pointer = obj; - pr->pdc = obj_list; - - return; -} - -/* Initialize _PDC data based on the CPU vendor */ -void arch_acpi_processor_init_pdc(struct acpi_processor *pr) -{ - struct cpuinfo_x86 *c = &cpu_data(pr->id); - - pr->pdc = NULL; - if (c->x86_vendor == X86_VENDOR_INTEL) - init_intel_pdc(pr, c); - - return; -} - -EXPORT_SYMBOL(arch_acpi_processor_init_pdc); diff --git a/arch/x86/kernel/acpi/realmode/.gitignore b/arch/x86/kernel/acpi/realmode/.gitignore deleted file mode 100644 index 58f1f48a58f..00000000000 --- a/arch/x86/kernel/acpi/realmode/.gitignore +++ /dev/null @@ -1,3 +0,0 @@ -wakeup.bin -wakeup.elf -wakeup.lds diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile deleted file mode 100644 index 167bc16ce0e..00000000000 --- a/arch/x86/kernel/acpi/realmode/Makefile +++ /dev/null @@ -1,58 +0,0 @@ -# -# arch/x86/kernel/acpi/realmode/Makefile -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# - -always := wakeup.bin -targets := wakeup.elf wakeup.lds - -wakeup-y += wakeup.o wakemain.o video-mode.o copy.o bioscall.o regs.o - -# The link order of the video-*.o modules can matter. In particular, -# video-vga.o *must* be listed first, followed by video-vesa.o. -# Hardware-specific drivers should follow in the order they should be -# probed, and video-bios.o should typically be last. -wakeup-y += video-vga.o -wakeup-y += video-vesa.o -wakeup-y += video-bios.o - -targets += $(wakeup-y) - -bootsrc := $(src)/../../../boot - -# --------------------------------------------------------------------------- - -# How to compile the 16-bit code. Note we always compile for -march=i386, -# that way we can complain to the user if the CPU is insufficient. -# Compile with _SETUP since this is similar to the boot-time setup code. -KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \ - -I$(srctree)/$(bootsrc) \ - $(cflags-y) \ - -Wall -Wstrict-prototypes \ - -march=i386 -mregparm=3 \ - -include $(srctree)/$(bootsrc)/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ - $(call cc-option, -ffreestanding) \ - $(call cc-option, -fno-toplevel-reorder,\ - $(call cc-option, -fno-unit-at-a-time)) \ - $(call cc-option, -fno-stack-protector) \ - $(call cc-option, -mpreferred-stack-boundary=2) -KBUILD_CFLAGS += $(call cc-option, -m32) -KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ - -WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y)) - -LDFLAGS_wakeup.elf := -T - -CPPFLAGS_wakeup.lds += -P -C - -$(obj)/wakeup.elf: $(obj)/wakeup.lds $(WAKEUP_OBJS) FORCE - $(call if_changed,ld) - -OBJCOPYFLAGS_wakeup.bin := -O binary - -$(obj)/wakeup.bin: $(obj)/wakeup.elf FORCE - $(call if_changed,objcopy) diff --git a/arch/x86/kernel/acpi/realmode/bioscall.S b/arch/x86/kernel/acpi/realmode/bioscall.S deleted file mode 100644 index f51eb0bb56c..00000000000 --- a/arch/x86/kernel/acpi/realmode/bioscall.S +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/bioscall.S" diff --git a/arch/x86/kernel/acpi/realmode/copy.S b/arch/x86/kernel/acpi/realmode/copy.S deleted file mode 100644 index dc59ebee69d..00000000000 --- a/arch/x86/kernel/acpi/realmode/copy.S +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/copy.S" diff --git a/arch/x86/kernel/acpi/realmode/regs.c b/arch/x86/kernel/acpi/realmode/regs.c deleted file mode 100644 index 6206033ba20..00000000000 --- a/arch/x86/kernel/acpi/realmode/regs.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/regs.c" diff --git a/arch/x86/kernel/acpi/realmode/video-bios.c b/arch/x86/kernel/acpi/realmode/video-bios.c deleted file mode 100644 index 7deabc144a2..00000000000 --- a/arch/x86/kernel/acpi/realmode/video-bios.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-bios.c" diff --git a/arch/x86/kernel/acpi/realmode/video-mode.c b/arch/x86/kernel/acpi/realmode/video-mode.c deleted file mode 100644 index 328ad209f11..00000000000 --- a/arch/x86/kernel/acpi/realmode/video-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-mode.c" diff --git a/arch/x86/kernel/acpi/realmode/video-vesa.c b/arch/x86/kernel/acpi/realmode/video-vesa.c deleted file mode 100644 index 9dbb9672226..00000000000 --- a/arch/x86/kernel/acpi/realmode/video-vesa.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-vesa.c" diff --git a/arch/x86/kernel/acpi/realmode/video-vga.c b/arch/x86/kernel/acpi/realmode/video-vga.c deleted file mode 100644 index bcc81255f37..00000000000 --- a/arch/x86/kernel/acpi/realmode/video-vga.c +++ /dev/null @@ -1 +0,0 @@ -#include "../../../boot/video-vga.c" diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c deleted file mode 100644 index 883962d9eef..00000000000 --- a/arch/x86/kernel/acpi/realmode/wakemain.c +++ /dev/null @@ -1,81 +0,0 @@ -#include "wakeup.h" -#include "boot.h" - -static void udelay(int loops) -{ - while (loops--) - io_delay(); /* Approximately 1 us */ -} - -static void beep(unsigned int hz) -{ - u8 enable; - - if (!hz) { - enable = 0x00; /* Turn off speaker */ - } else { - u16 div = 1193181/hz; - - outb(0xb6, 0x43); /* Ctr 2, squarewave, load, binary */ - io_delay(); - outb(div, 0x42); /* LSB of counter */ - io_delay(); - outb(div >> 8, 0x42); /* MSB of counter */ - io_delay(); - - enable = 0x03; /* Turn on speaker */ - } - inb(0x61); /* Dummy read of System Control Port B */ - io_delay(); - outb(enable, 0x61); /* Enable timer 2 output to speaker */ - io_delay(); -} - -#define DOT_HZ 880 -#define DASH_HZ 587 -#define US_PER_DOT 125000 - -/* Okay, this is totally silly, but it's kind of fun. */ -static void send_morse(const char *pattern) -{ - char s; - - while ((s = *pattern++)) { - switch (s) { - case '.': - beep(DOT_HZ); - udelay(US_PER_DOT); - beep(0); - udelay(US_PER_DOT); - break; - case '-': - beep(DASH_HZ); - udelay(US_PER_DOT * 3); - beep(0); - udelay(US_PER_DOT); - break; - default: /* Assume it's a space */ - udelay(US_PER_DOT * 3); - break; - } - } -} - -void main(void) -{ - /* Kill machine if structures are wrong */ - if (wakeup_header.real_magic != 0x12345678) - while (1); - - if (wakeup_header.realmode_flags & 4) - send_morse("...-"); - - if (wakeup_header.realmode_flags & 1) - asm volatile("lcallw $0xc000,$3"); - - if (wakeup_header.realmode_flags & 2) { - /* Need to call BIOS */ - probe_cards(0); - set_mode(wakeup_header.video_mode); - } -} diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S deleted file mode 100644 index 580b4e29601..00000000000 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ /dev/null @@ -1,149 +0,0 @@ -/* - * ACPI wakeup real mode startup stub - */ -#include <asm/segment.h> -#include <asm/msr-index.h> -#include <asm/page_types.h> -#include <asm/pgtable_types.h> -#include <asm/processor-flags.h> - - .code16 - .section ".header", "a" - -/* This should match the structure in wakeup.h */ - .globl wakeup_header -wakeup_header: -video_mode: .short 0 /* Video mode number */ -pmode_return: .byte 0x66, 0xea /* ljmpl */ - .long 0 /* offset goes here */ - .short __KERNEL_CS -pmode_cr0: .long 0 /* Saved %cr0 */ -pmode_cr3: .long 0 /* Saved %cr3 */ -pmode_cr4: .long 0 /* Saved %cr4 */ -pmode_efer: .quad 0 /* Saved EFER */ -pmode_gdt: .quad 0 -realmode_flags: .long 0 -real_magic: .long 0 -trampoline_segment: .word 0 -_pad1: .byte 0 -wakeup_jmp: .byte 0xea /* ljmpw */ -wakeup_jmp_off: .word 3f -wakeup_jmp_seg: .word 0 -wakeup_gdt: .quad 0, 0, 0 -signature: .long 0x51ee1111 - - .text - .globl _start - .code16 -wakeup_code: -_start: - cli - cld - - /* Apparently some dimwit BIOS programmers don't know how to - program a PM to RM transition, and we might end up here with - junk in the data segment descriptor registers. The only way - to repair that is to go into PM and fix it ourselves... */ - movw $16, %cx - lgdtl %cs:wakeup_gdt - movl %cr0, %eax - orb $X86_CR0_PE, %al - movl %eax, %cr0 - jmp 1f -1: ljmpw $8, $2f -2: - movw %cx, %ds - movw %cx, %es - movw %cx, %ss - movw %cx, %fs - movw %cx, %gs - - andb $~X86_CR0_PE, %al - movl %eax, %cr0 - jmp wakeup_jmp -3: - /* Set up segments */ - movw %cs, %ax - movw %ax, %ds - movw %ax, %es - movw %ax, %ss - lidtl wakeup_idt - - movl $wakeup_stack_end, %esp - - /* Clear the EFLAGS */ - pushl $0 - popfl - - /* Check header signature... */ - movl signature, %eax - cmpl $0x51ee1111, %eax - jne bogus_real_magic - - /* Check we really have everything... */ - movl end_signature, %eax - cmpl $0x65a22c82, %eax - jne bogus_real_magic - - /* Call the C code */ - calll main - - /* Do any other stuff... */ - -#ifndef CONFIG_64BIT - /* This could also be done in C code... */ - movl pmode_cr3, %eax - movl %eax, %cr3 - - movl pmode_cr4, %ecx - jecxz 1f - movl %ecx, %cr4 -1: - movl pmode_efer, %eax - movl pmode_efer + 4, %edx - movl %eax, %ecx - orl %edx, %ecx - jz 1f - movl $0xc0000080, %ecx - wrmsr -1: - - lgdtl pmode_gdt - - /* This really couldn't... */ - movl pmode_cr0, %eax - movl %eax, %cr0 - jmp pmode_return -#else - pushw $0 - pushw trampoline_segment - pushw $0 - lret -#endif - -bogus_real_magic: -1: - hlt - jmp 1b - - .data - .balign 8 - - /* This is the standard real-mode IDT */ -wakeup_idt: - .word 0xffff /* limit */ - .long 0 /* address */ - .word 0 - - .globl HEAP, heap_end -HEAP: - .long wakeup_heap -heap_end: - .long wakeup_stack - - .bss -wakeup_heap: - .space 2048 -wakeup_stack: - .space 2048 -wakeup_stack_end: diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h deleted file mode 100644 index 69d38d0b2b6..00000000000 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Definitions for the wakeup data structure at the head of the - * wakeup code. - */ - -#ifndef ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H -#define ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H - -#ifndef __ASSEMBLY__ -#include <linux/types.h> - -/* This must match data at wakeup.S */ -struct wakeup_header { - u16 video_mode; /* Video mode number */ - u16 _jmp1; /* ljmpl opcode, 32-bit only */ - u32 pmode_entry; /* Protected mode resume point, 32-bit only */ - u16 _jmp2; /* CS value, 32-bit only */ - u32 pmode_cr0; /* Protected mode cr0 */ - u32 pmode_cr3; /* Protected mode cr3 */ - u32 pmode_cr4; /* Protected mode cr4 */ - u32 pmode_efer_low; /* Protected mode EFER */ - u32 pmode_efer_high; - u64 pmode_gdt; - u32 realmode_flags; - u32 real_magic; - u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ - u8 _pad1; - u8 wakeup_jmp; - u16 wakeup_jmp_off; - u16 wakeup_jmp_seg; - u64 wakeup_gdt[3]; - u32 signature; /* To check we have correct structure */ -} __attribute__((__packed__)); - -extern struct wakeup_header wakeup_header; -#endif - -#define HEADER_OFFSET 0x3f00 -#define WAKEUP_SIZE 0x4000 - -#endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */ diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S deleted file mode 100644 index 7da00b799cd..00000000000 --- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S +++ /dev/null @@ -1,61 +0,0 @@ -/* - * wakeup.ld - * - * Linker script for the real-mode wakeup code - */ -#undef i386 -#include "wakeup.h" - -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) -ENTRY(_start) - -SECTIONS -{ - . = 0; - .text : { - *(.text*) - } - - . = ALIGN(16); - .rodata : { - *(.rodata*) - } - - .videocards : { - video_cards = .; - *(.videocards) - video_cards_end = .; - } - - . = ALIGN(16); - .data : { - *(.data*) - } - - .signature : { - end_signature = .; - LONG(0x65a22c82) - } - - . = ALIGN(16); - .bss : { - __bss_start = .; - *(.bss) - __bss_end = .; - } - - . = HEADER_OFFSET; - .header : { - *(.header) - } - - . = ALIGN(16); - _end = .; - - /DISCARD/ : { - *(.note*) - } - - . = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!"); -} diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 7c243a2c511..31368207837 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -2,149 +2,115 @@ * sleep.c - x86-specific ACPI sleep support. * * Copyright (C) 2001-2003 Patrick Mochel - * Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz> + * Copyright (C) 2001-2003 Pavel Machek <pavel@ucw.cz> */ #include <linux/acpi.h> #include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/dmi.h> #include <linux/cpumask.h> #include <asm/segment.h> #include <asm/desc.h> +#include <asm/pgtable.h> +#include <asm/cacheflush.h> +#include <asm/realmode.h> -#include "realmode/wakeup.h" +#include "../../realmode/rm/wakeup.h" #include "sleep.h" -unsigned long acpi_wakeup_address; unsigned long acpi_realmode_flags; -/* address in low memory of the wakeup routine. */ -static unsigned long acpi_realmode; - #if defined(CONFIG_SMP) && defined(CONFIG_64BIT) static char temp_stack[4096]; #endif /** - * acpi_save_state_mem - save kernel state + * x86_acpi_enter_sleep_state - enter sleep state + * @state: Sleep state to enter. + * + * Wrapper around acpi_enter_sleep_state() to be called by assmebly. + */ +acpi_status asmlinkage __visible x86_acpi_enter_sleep_state(u8 state) +{ + return acpi_enter_sleep_state(state); +} + +/** + * x86_acpi_suspend_lowlevel - save kernel state * * Create an identity mapped page table and copy the wakeup routine to * low memory. - * - * Note that this is too late to change acpi_wakeup_address. */ -int acpi_save_state_mem(void) +int x86_acpi_suspend_lowlevel(void) { - struct wakeup_header *header; - - if (!acpi_realmode) { - printk(KERN_ERR "Could not allocate memory during boot, " - "S3 disabled\n"); - return -ENOMEM; - } - memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE); + struct wakeup_header *header = + (struct wakeup_header *) __va(real_mode_header->wakeup_header); - header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET); - if (header->signature != 0x51ee1111) { + if (header->signature != WAKEUP_HEADER_SIGNATURE) { printk(KERN_ERR "wakeup header does not match\n"); return -EINVAL; } header->video_mode = saved_video_mode; - header->wakeup_jmp_seg = acpi_wakeup_address >> 4; - - /* - * Set up the wakeup GDT. We set these up as Big Real Mode, - * that is, with limits set to 4 GB. At least the Lenovo - * Thinkpad X61 is known to need this for the video BIOS - * initialization quirk to work; this is likely to also - * be the case for other laptops or integrated video devices. - */ - - /* GDT[0]: GDT self-pointer */ - header->wakeup_gdt[0] = - (u64)(sizeof(header->wakeup_gdt) - 1) + - ((u64)(acpi_wakeup_address + - ((char *)&header->wakeup_gdt - (char *)acpi_realmode)) - << 16); - /* GDT[1]: big real mode-like code segment */ - header->wakeup_gdt[1] = - GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff); - /* GDT[2]: big real mode-like data segment */ - header->wakeup_gdt[2] = - GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff); + header->pmode_behavior = 0; #ifndef CONFIG_64BIT - store_gdt((struct desc_ptr *)&header->pmode_gdt); + native_store_gdt((struct desc_ptr *)&header->pmode_gdt); - header->pmode_efer_low = nx_enabled; - if (header->pmode_efer_low & 1) { - /* This is strange, why not save efer, always? */ - rdmsr(MSR_EFER, header->pmode_efer_low, - header->pmode_efer_high); - } + /* + * We have to check that we can write back the value, and not + * just read it. At least on 90 nm Pentium M (Family 6, Model + * 13), reading an invalid MSR is not guaranteed to trap, see + * Erratum X4 in "Intel Pentium M Processor on 90 nm Process + * with 2-MB L2 Cache and Intel® Processor A100 and A110 on 90 + * nm process with 512-KB L2 Cache Specification Update". + */ + if (!rdmsr_safe(MSR_EFER, + &header->pmode_efer_low, + &header->pmode_efer_high) && + !wrmsr_safe(MSR_EFER, + header->pmode_efer_low, + header->pmode_efer_high)) + header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_EFER); #endif /* !CONFIG_64BIT */ header->pmode_cr0 = read_cr0(); - header->pmode_cr4 = read_cr4_safe(); + if (__this_cpu_read(cpu_info.cpuid_level) >= 0) { + header->pmode_cr4 = read_cr4(); + header->pmode_behavior |= (1 << WAKEUP_BEHAVIOR_RESTORE_CR4); + } + if (!rdmsr_safe(MSR_IA32_MISC_ENABLE, + &header->pmode_misc_en_low, + &header->pmode_misc_en_high) && + !wrmsr_safe(MSR_IA32_MISC_ENABLE, + header->pmode_misc_en_low, + header->pmode_misc_en_high)) + header->pmode_behavior |= + (1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE); header->realmode_flags = acpi_realmode_flags; header->real_magic = 0x12345678; #ifndef CONFIG_64BIT header->pmode_entry = (u32)&wakeup_pmode_return; - header->pmode_cr3 = (u32)(swsusp_pg_dir - __PAGE_OFFSET); + header->pmode_cr3 = (u32)__pa_symbol(initial_page_table); saved_magic = 0x12345678; #else /* CONFIG_64BIT */ - header->trampoline_segment = setup_trampoline() >> 4; #ifdef CONFIG_SMP - stack_start.sp = temp_stack + sizeof(temp_stack); + stack_start = (unsigned long)temp_stack + sizeof(temp_stack); early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(smp_processor_id()); initial_gs = per_cpu_offset(smp_processor_id()); #endif initial_code = (unsigned long)wakeup_long64; - saved_magic = 0x123456789abcdef0; + saved_magic = 0x123456789abcdef0L; #endif /* CONFIG_64BIT */ + do_suspend_lowlevel(); return 0; } -/* - * acpi_restore_state - undo effects of acpi_save_state_mem - */ -void acpi_restore_state_mem(void) -{ -} - - -/** - * acpi_reserve_bootmem - do _very_ early ACPI initialisation - * - * We allocate a page from the first 1MB of memory for the wakeup - * routine for when we come back from a sleep state. The - * runtime allocator allows specification of <16MB pages, but not - * <1MB pages. - */ -void __init acpi_reserve_bootmem(void) -{ - if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) { - printk(KERN_ERR - "ACPI: Wakeup code way too big, S3 disabled.\n"); - return; - } - - acpi_realmode = (unsigned long)alloc_bootmem_low(WAKEUP_SIZE); - - if (!acpi_realmode) { - printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n"); - return; - } - - acpi_wakeup_address = virt_to_phys((void *)acpi_realmode); -} - - static int __init acpi_sleep_setup(char *str) { while ((str != NULL) && (*str != '\0')) { @@ -157,9 +123,11 @@ static int __init acpi_sleep_setup(char *str) #ifdef CONFIG_HIBERNATION if (strncmp(str, "s4_nohwsig", 10) == 0) acpi_no_s4_hw_signature(); - if (strncmp(str, "s4_nonvs", 8) == 0) - acpi_s4_no_nvs(); #endif + if (strncmp(str, "nonvs", 5) == 0) + acpi_nvs_nosave(); + if (strncmp(str, "nonvs_s3", 8) == 0) + acpi_nvs_nosave_s3(); if (strncmp(str, "old_ordering", 12) == 0) acpi_old_suspend_ordering(); str = strchr(str, ','); diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index adbcbaa6f1d..65c7b606b60 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -2,15 +2,20 @@ * Variables and functions used by the code in sleep.c */ -#include <asm/trampoline.h> - -extern char wakeup_code_start, wakeup_code_end; +#include <asm/realmode.h> extern unsigned long saved_video_mode; extern long saved_magic; extern int wakeup_pmode_return; -extern char swsusp_pg_dir[PAGE_SIZE]; + +extern u8 wake_sleep_flags; extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); + +extern void do_suspend_lowlevel(void); + +extern int x86_acpi_suspend_lowlevel(void); + +acpi_status asmlinkage x86_acpi_enter_sleep_state(u8 state); diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index 8ded418b059..665c6b7d2ea 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -1,4 +1,4 @@ - .section .text.page_aligned + .text #include <linux/linkage.h> #include <asm/segment.h> #include <asm/page_types.h> @@ -18,7 +18,6 @@ wakeup_pmode_return: movw %ax, %gs # reload the gdt, as we need the full 32 bit address - lgdt saved_gdt lidt saved_idt lldt saved_ldt ljmp $(__KERNEL_CS), $1f @@ -44,7 +43,6 @@ bogus_magic: save_registers: - sgdt saved_gdt sidt saved_idt sldt saved_ldt str saved_tss @@ -75,7 +73,7 @@ ENTRY(do_suspend_lowlevel) call save_processor_state call save_registers pushl $3 - call acpi_enter_sleep_state + call x86_acpi_enter_sleep_state addl $4, %esp # In case of S3 failure, we'll emerge here. Jump @@ -93,7 +91,6 @@ ENTRY(saved_magic) .long 0 ENTRY(saved_eip) .long 0 # saved registers -saved_gdt: .long 0,0 saved_idt: .long 0,0 saved_ldt: .long 0 saved_tss: .long 0 diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 8ea5164cbd0..ae693b51ed8 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -73,7 +73,7 @@ ENTRY(do_suspend_lowlevel) addq $8, %rsp movl $3, %edi xorl %eax, %eax - call acpi_enter_sleep_state + call x86_acpi_enter_sleep_state /* in case something went wrong, restore the machine status and go on */ jmp resume_point diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S deleted file mode 100644 index 6ff3b573057..00000000000 --- a/arch/x86/kernel/acpi/wakeup_rm.S +++ /dev/null @@ -1,10 +0,0 @@ -/* - * Wrapper script for the realmode binary as a transport object - * before copying to low memory. - */ - .section ".rodata","a" - .globl wakeup_code_start, wakeup_code_end -wakeup_code_start: - .incbin "arch/x86/kernel/acpi/realmode/wakeup.bin" -wakeup_code_end: - .size wakeup_code_start, .-wakeup_code_start |