1 files changed, 80 insertions, 120 deletions

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index ce664f33ea8..86281ffb96d 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -44,20 +44,15 @@
 #include <asm/mpspec.h>
 #include <asm/smp.h>
 
+#include "sleep.h" /* To include x86_acpi_suspend_lowlevel */
 static int __initdata acpi_force = 0;
-u32 acpi_rsdt_forced;
 int acpi_disabled;
 EXPORT_SYMBOL(acpi_disabled);
 
 #ifdef	CONFIG_X86_64
 # include <asm/proto.h>
-# include <asm/numa_64.h>
 #endif				/* X86 */
 
-#define BAD_MADT_ENTRY(entry, end) (					    \
-		(!entry) || (unsigned long)entry + sizeof(*entry) > end ||  \
-		((struct acpi_subtable_header *)entry)->length < sizeof(*entry))
-
 #define PREFIX			"ACPI: "
 
 int acpi_noirq;				/* skip ACPI IRQ initialization */
@@ -67,6 +62,7 @@ EXPORT_SYMBOL(acpi_pci_disabled);
 int acpi_lapic;
 int acpi_ioapic;
 int acpi_strict;
+int acpi_disable_cmcff;
 
 u8 acpi_sci_flags __initdata;
 int acpi_sci_override_gsi __initdata;
@@ -141,16 +137,8 @@ static u32 irq_to_gsi(int irq)
 }
 
 /*
- * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
- * to map the target physical address. The problem is that set_fixmap()
- * provides a single page, and it is possible that the page is not
- * sufficient.
- * By using this area, we can map up to MAX_IO_APICS pages temporarily,
- * i.e. until the next __va_range() call.
- *
- * Important Safety Note:  The fixed I/O APIC page numbers are *subtracted*
- * from the fixed base.  That's why we start at FIX_IO_APIC_BASE_END and
- * count idx down while incrementing the phys address.
+ * This is just a simple wrapper around early_ioremap(),
+ * with sanity checks for phys == 0 and size == 0.
  */
 char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 {
@@ -160,6 +148,7 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size)
 
 	return early_ioremap(phys, size);
 }
+
 void __init __acpi_unmap_table(char *map, unsigned long size)
 {
 	if (!map || !size)
@@ -195,24 +184,31 @@ static int __init acpi_parse_madt(struct acpi_table_header *table)
 	return 0;
 }
 
-static void __cpuinit acpi_register_lapic(int id, u8 enabled)
+/**
+ * acpi_register_lapic - register a local apic and generates a logic cpu number
+ * @id: local apic id to register
+ * @enabled: this cpu is enabled or not
+ *
+ * Returns the logic cpu number which maps to the local apic
+ */
+static int acpi_register_lapic(int id, u8 enabled)
 {
 	unsigned int ver = 0;
 
-	if (id >= (MAX_LOCAL_APIC-1)) {
+	if (id >= MAX_LOCAL_APIC) {
 		printk(KERN_INFO PREFIX "skipped apicid that is too big\n");
-		return;
+		return -EINVAL;
 	}
 
 	if (!enabled) {
 		++disabled_cpus;
-		return;
+		return -EINVAL;
 	}
 
 	if (boot_cpu_physical_apicid != -1U)
 		ver = apic_version[boot_cpu_physical_apicid];
 
-	generic_processor_info(id, ver);
+	return generic_processor_info(id, ver);
 }
 
 static int __init
@@ -239,7 +235,7 @@ acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
 	 * to not preallocating memory for all NR_CPUS
 	 * when we use CPU hotplug.
 	 */
-	if (!cpu_has_x2apic && (apic_id >= 0xff) && enabled)
+	if (!apic->apic_id_valid(apic_id) && enabled)
 		printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
 	else
 		acpi_register_lapic(apic_id, enabled);
@@ -422,12 +418,14 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
 		return 0;
 	}
 
-	if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
+	if (intsrc->source_irq == 0) {
 		if (acpi_skip_timer_override) {
-			printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+			printk(PREFIX "BIOS IRQ0 override ignored.\n");
 			return 0;
 		}
-		if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+
+		if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
+			&& (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
 			intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
 			printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
 		}
@@ -558,6 +556,12 @@ static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi,
 int (*__acpi_register_gsi)(struct device *dev, u32 gsi,
 			   int trigger, int polarity) = acpi_register_gsi_pic;
 
+#ifdef CONFIG_ACPI_SLEEP
+int (*acpi_suspend_lowlevel)(void) = x86_acpi_suspend_lowlevel;
+#else
+int (*acpi_suspend_lowlevel)(void);
+#endif
+
 /*
  * success: return IRQ number (>=0)
  * failure: return < 0
@@ -572,6 +576,12 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 
 	return irq;
 }
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
+
+void acpi_unregister_gsi(u32 gsi)
+{
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
 
 void __init acpi_set_irq_model_pic(void)
 {
@@ -599,95 +609,43 @@ static void acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 	int nid;
 
 	nid = acpi_get_node(handle);
-	if (nid == -1 || !node_online(nid))
-		return;
-	set_apicid_to_node(physid, nid);
-	numa_set_node(cpu, nid);
+	if (nid != -1) {
+		set_apicid_to_node(physid, nid);
+		numa_set_node(cpu, nid);
+	}
 #endif
 }
 
-static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
+static int _acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
 {
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-	union acpi_object *obj;
-	struct acpi_madt_local_apic *lapic;
-	cpumask_var_t tmp_map, new_map;
-	u8 physid;
 	int cpu;
-	int retval = -ENOMEM;
-
-	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
-		return -EINVAL;
-
-	if (!buffer.length || !buffer.pointer)
-		return -EINVAL;
-
-	obj = buffer.pointer;
-	if (obj->type != ACPI_TYPE_BUFFER ||
-	    obj->buffer.length < sizeof(*lapic)) {
-		kfree(buffer.pointer);
-		return -EINVAL;
-	}
-
-	lapic = (struct acpi_madt_local_apic *)obj->buffer.pointer;
-
-	if (lapic->header.type != ACPI_MADT_TYPE_LOCAL_APIC ||
-	    !(lapic->lapic_flags & ACPI_MADT_ENABLED)) {
-		kfree(buffer.pointer);
-		return -EINVAL;
-	}
-
-	physid = lapic->id;
 
-	kfree(buffer.pointer);
-	buffer.length = ACPI_ALLOCATE_BUFFER;
-	buffer.pointer = NULL;
-
-	if (!alloc_cpumask_var(&tmp_map, GFP_KERNEL))
-		goto out;
-
-	if (!alloc_cpumask_var(&new_map, GFP_KERNEL))
-		goto free_tmp_map;
-
-	cpumask_copy(tmp_map, cpu_present_mask);
-	acpi_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
-
-	/*
-	 * If mp_register_lapic successfully generates a new logical cpu
-	 * number, then the following will get us exactly what was mapped
-	 */
-	cpumask_andnot(new_map, cpu_present_mask, tmp_map);
-	if (cpumask_empty(new_map)) {
-		printk ("Unable to map lapic to logical cpu number\n");
-		retval = -EINVAL;
-		goto free_new_map;
+	cpu = acpi_register_lapic(physid, ACPI_MADT_ENABLED);
+	if (cpu < 0) {
+		pr_info(PREFIX "Unable to map lapic to logical cpu number\n");
+		return cpu;
 	}
 
 	acpi_processor_set_pdc(handle);
-
-	cpu = cpumask_first(new_map);
 	acpi_map_cpu2node(handle, cpu, physid);
 
 	*pcpu = cpu;
-	retval = 0;
-
-free_new_map:
-	free_cpumask_var(new_map);
-free_tmp_map:
-	free_cpumask_var(tmp_map);
-out:
-	return retval;
+	return 0;
 }
 
 /* wrapper to silence section mismatch warning */
-int __ref acpi_map_lsapic(acpi_handle handle, int *pcpu)
+int __ref acpi_map_lsapic(acpi_handle handle, int physid, int *pcpu)
 {
-	return _acpi_map_lsapic(handle, pcpu);
+	return _acpi_map_lsapic(handle, physid, pcpu);
 }
 EXPORT_SYMBOL(acpi_map_lsapic);
 
 int acpi_unmap_lsapic(int cpu)
 {
+#ifdef CONFIG_ACPI_NUMA
+	set_apicid_to_node(per_cpu(x86_cpu_to_apicid, cpu), NUMA_NO_NODE);
+#endif
+
 	per_cpu(x86_cpu_to_apicid, cpu) = -1;
 	set_cpu_present(cpu, false);
 	num_processors--;
@@ -732,7 +690,7 @@ static int __init acpi_parse_sbf(struct acpi_table_header *table)
 #ifdef CONFIG_HPET_TIMER
 #include <asm/hpet.h>
 
-static struct __initdata resource *hpet_res;
+static struct resource *hpet_res __initdata;
 
 static int __init acpi_parse_hpet(struct acpi_table_header *table)
 {
@@ -945,10 +903,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
 #ifdef	CONFIG_X86_IO_APIC
 #define MP_ISA_BUS		0
 
-#ifdef CONFIG_X86_ES7000
-extern int es7000_plat;
-#endif
-
 void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 {
 	int ioapic;
@@ -989,7 +943,7 @@ void __init mp_config_acpi_legacy_irqs(void)
 	int i;
 	struct mpc_intsrc mp_irq;
 
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+#ifdef CONFIG_EISA
 	/*
 	 * Fabricate the legacy ISA bus (bus #31).
 	 */
@@ -998,14 +952,6 @@ void __init mp_config_acpi_legacy_irqs(void)
 	set_bit(MP_ISA_BUS, mp_bus_not_pci);
 	pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
 
-#ifdef CONFIG_X86_ES7000
-	/*
-	 * Older generations of ES7000 have no legacy identity mappings
-	 */
-	if (es7000_plat == 1)
-		return;
-#endif
-
 	/*
 	 * Use the default configuration for the IRQs 0-15.  Unless
 	 * overridden by (MADT) interrupt source override entries.
@@ -1071,9 +1017,7 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
 
 	if (!acpi_ioapic)
 		return 0;
-	if (!dev)
-		return 0;
-	if (dev->bus != &pci_bus_type)
+	if (!dev || !dev_is_pci(dev))
 		return 0;
 
 	pdev = to_pci_dev(dev);
@@ -1101,6 +1045,7 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 	int ioapic;
 	int ioapic_pin;
 	struct io_apic_irq_attr irq_attr;
+	int ret;
 
 	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
 		return gsi;
@@ -1130,7 +1075,9 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 	set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
 			     trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
 			     polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-	io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr);
+	ret = io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr);
+	if (ret < 0)
+		gsi = INT_MIN;
 
 	return gsi;
 }
@@ -1333,17 +1280,12 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d)
 }
 
 /*
- * Force ignoring BIOS IRQ0 pin2 override
+ * Force ignoring BIOS IRQ0 override
  */
 static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
 {
-	/*
-	 * The ati_ixp4x0_rev() early PCI quirk should have set
-	 * the acpi_skip_timer_override flag already:
-	 */
 	if (!acpi_skip_timer_override) {
-		WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
-		pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+		pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
 			d->ident);
 		acpi_skip_timer_override = 1;
 	}
@@ -1437,7 +1379,7 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
 	 * is enabled.  This input is incorrectly designated the
 	 * ISA IRQ 0 via an interrupt source override even though
 	 * it is wired to the output of the master 8259A and INTIN0
-	 * is not connected at all.  Force ignoring BIOS IRQ0 pin2
+	 * is not connected at all.  Force ignoring BIOS IRQ0
 	 * override in that cases.
 	 */
 	{
@@ -1472,6 +1414,14 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
 		     },
 	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "FUJITSU SIEMENS",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+		     },
+	 },
 	{}
 };
 
@@ -1595,7 +1545,7 @@ static int __init parse_acpi(char *arg)
 	}
 	/* acpi=rsdt use RSDT instead of XSDT */
 	else if (strcmp(arg, "rsdt") == 0) {
-		acpi_rsdt_forced = 1;
+		acpi_gbl_do_not_use_xsdt = TRUE;
 	}
 	/* "acpi=noirq" disables ACPI interrupt routing */
 	else if (strcmp(arg, "noirq") == 0) {
@@ -1604,6 +1554,10 @@ static int __init parse_acpi(char *arg)
 	/* "acpi=copy_dsdt" copys DSDT */
 	else if (strcmp(arg, "copy_dsdt") == 0) {
 		acpi_gbl_copy_dsdt_locally = 1;
+	}
+	/* "acpi=nocmcff" disables FF mode for corrected errors */
+	else if (strcmp(arg, "nocmcff") == 0) {
+		acpi_disable_cmcff = 1;
 	} else {
 		/* Core will printk when we return error. */
 		return -EINVAL;
@@ -1694,3 +1648,9 @@ int __acpi_release_global_lock(unsigned int *lock)
 	} while (unlikely (val != old));
 	return old & 0x1;
 }
+
+void __init arch_reserve_mem_area(acpi_physical_address addr, size_t size)
+{
+	e820_add_region(addr, size, E820_ACPI);
+	update_e820();
+}