diff options
Diffstat (limited to 'arch/x86/include/asm/olpc.h')
| -rw-r--r-- | arch/x86/include/asm/olpc.h | 68 |
1 files changed, 34 insertions, 34 deletions
diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h index 3a57385d9fa..72f9adf6eca 100644 --- a/arch/x86/include/asm/olpc.h +++ b/arch/x86/include/asm/olpc.h @@ -13,7 +13,7 @@ struct olpc_platform_t { #define OLPC_F_PRESENT 0x01 #define OLPC_F_DCON 0x02 -#define OLPC_F_VSA 0x04 +#define OLPC_F_EC_WIDE_SCI 0x04 #ifdef CONFIG_OLPC @@ -21,7 +21,7 @@ extern struct olpc_platform_t olpc_platform_info; /* * OLPC board IDs contain the major build number within the mask 0x0ff0, - * and the minor build number withing 0x000f. Pre-builds have a minor + * and the minor build number within 0x000f. Pre-builds have a minor * number less than 8, and normal builds start at 8. For example, 0x0B10 * is a PreB1, and 0x0C18 is a C1. */ @@ -51,18 +51,6 @@ static inline int olpc_has_dcon(void) } /* - * The VSA is software from AMD that typical Geode bioses will include. - * It is used to emulate the PCI bus, VGA, etc. OLPC's Open Firmware does - * not include the VSA; instead, PCI is emulated by the kernel. - * - * The VSA is described further in arch/x86/pci/olpc.c. - */ -static inline int olpc_has_vsa(void) -{ - return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0; -} - -/* * The "Mass Production" version of OLPC's XO is identified as being model * C2. During the prototype phase, the following models (in chronological * order) were created: A1, B1, B2, B3, B4, C1. The A1 through B2 models @@ -75,6 +63,13 @@ static inline int olpc_board_at_least(uint32_t rev) return olpc_platform_info.boardrev >= rev; } +extern void olpc_ec_wakeup_set(u16 value); +extern void olpc_ec_wakeup_clear(u16 value); +extern bool olpc_ec_wakeup_available(void); + +extern int olpc_ec_mask_write(u16 bits); +extern int olpc_ec_sci_query(u16 *sci_value); + #else static inline int machine_is_olpc(void) @@ -87,24 +82,23 @@ static inline int olpc_has_dcon(void) return 0; } -static inline int olpc_has_vsa(void) +static inline void olpc_ec_wakeup_set(u16 value) { } +static inline void olpc_ec_wakeup_clear(u16 value) { } + +static inline bool olpc_ec_wakeup_available(void) { - return 0; + return false; } #endif -/* EC related functions */ - -extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, - unsigned char *outbuf, size_t outlen); - -extern int olpc_ec_mask_set(uint8_t bits); -extern int olpc_ec_mask_unset(uint8_t bits); - -/* EC commands */ +#ifdef CONFIG_OLPC_XO1_PM +extern void do_olpc_suspend_lowlevel(void); +extern void olpc_xo1_pm_wakeup_set(u16 value); +extern void olpc_xo1_pm_wakeup_clear(u16 value); +#endif -#define EC_FIRMWARE_REV 0x08 +extern int pci_olpc_init(void); /* SCI source values */ @@ -113,20 +107,26 @@ extern int olpc_ec_mask_unset(uint8_t bits); #define EC_SCI_SRC_BATTERY 0x02 #define EC_SCI_SRC_BATSOC 0x04 #define EC_SCI_SRC_BATERR 0x08 -#define EC_SCI_SRC_EBOOK 0x10 -#define EC_SCI_SRC_WLAN 0x20 +#define EC_SCI_SRC_EBOOK 0x10 /* XO-1 only */ +#define EC_SCI_SRC_WLAN 0x20 /* XO-1 only */ #define EC_SCI_SRC_ACPWR 0x40 -#define EC_SCI_SRC_ALL 0x7F +#define EC_SCI_SRC_BATCRIT 0x80 +#define EC_SCI_SRC_GPWAKE 0x100 /* XO-1.5 only */ +#define EC_SCI_SRC_ALL 0x1FF /* GPIO assignments */ #define OLPC_GPIO_MIC_AC 1 -#define OLPC_GPIO_DCON_IRQ geode_gpio(7) +#define OLPC_GPIO_DCON_STAT0 5 +#define OLPC_GPIO_DCON_STAT1 6 +#define OLPC_GPIO_DCON_IRQ 7 #define OLPC_GPIO_THRM_ALRM geode_gpio(10) -#define OLPC_GPIO_SMB_CLK geode_gpio(14) -#define OLPC_GPIO_SMB_DATA geode_gpio(15) +#define OLPC_GPIO_DCON_LOAD 11 +#define OLPC_GPIO_DCON_BLANK 12 +#define OLPC_GPIO_SMB_CLK 14 +#define OLPC_GPIO_SMB_DATA 15 #define OLPC_GPIO_WORKAUX geode_gpio(24) -#define OLPC_GPIO_LID geode_gpio(26) -#define OLPC_GPIO_ECSCI geode_gpio(27) +#define OLPC_GPIO_LID 26 +#define OLPC_GPIO_ECSCI 27 #endif /* _ASM_X86_OLPC_H */ |