diff options
Diffstat (limited to 'arch/x86/include/asm/io.h')
| -rw-r--r-- | arch/x86/include/asm/io.h | 213 |
1 files changed, 176 insertions, 37 deletions
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index 73739322b6d..b8237d8a1e0 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -1,11 +1,45 @@ #ifndef _ASM_X86_IO_H #define _ASM_X86_IO_H +/* + * This file contains the definitions for the x86 IO instructions + * inb/inw/inl/outb/outw/outl and the "string versions" of the same + * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" + * versions of the single-IO instructions (inb_p/inw_p/..). + * + * This file is not meant to be obfuscating: it's just complicated + * to (a) handle it all in a way that makes gcc able to optimize it + * as well as possible and (b) trying to avoid writing the same thing + * over and over again with slight variations and possibly making a + * mistake somewhere. + */ + +/* + * Thanks to James van Artsdalen for a better timing-fix than + * the two short jumps: using outb's to a nonexistent port seems + * to guarantee better timings even on fast machines. + * + * On the other hand, I'd like to be sure of a non-existent port: + * I feel a bit unsafe about using 0x80 (should be safe, though) + * + * Linus + */ + + /* + * Bit simplified and optimized by Jan Hubicka + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. + * + * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, + * isa_read[wl] and isa_write[wl] fixed + * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> + */ + #define ARCH_HAS_IOREMAP_WC +#include <linux/string.h> #include <linux/compiler.h> -#include <asm-generic/int-ll64.h> #include <asm/page.h> +#include <asm/early_ioremap.h> #define build_mmio_read(name, size, type, reg, barrier) \ static inline type name(const volatile void __iomem *addr) \ @@ -51,27 +85,6 @@ build_mmio_write(__writel, "l", unsigned int, "r", ) build_mmio_read(readq, "q", unsigned long, "=r", :"memory") build_mmio_write(writeq, "q", unsigned long, "r", :"memory") -#else - -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} - -static inline void writeq(__u64 val, volatile void __iomem *addr) -{ - writel(val, addr); - writel(val >> 32, addr+4); -} - -#endif - #define readq_relaxed(a) readq(a) #define __raw_readq(a) readq(a) @@ -81,6 +94,8 @@ static inline void writeq(__u64 val, volatile void __iomem *addr) #define readq readq #define writeq writeq +#endif + /** * virt_to_phys - map virtual addresses to physical * @address: address to remap @@ -172,12 +187,128 @@ static inline void __iomem *ioremap(resource_size_t offset, unsigned long size) extern void iounmap(volatile void __iomem *addr); +extern void set_iounmap_nonlazy(void); + +#ifdef __KERNEL__ + +#include <asm-generic/iomap.h> + +#include <linux/vmalloc.h> + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +static inline void +memset_io(volatile void __iomem *addr, unsigned char val, size_t count) +{ + memset((void __force *)addr, val, count); +} + +static inline void +memcpy_fromio(void *dst, const volatile void __iomem *src, size_t count) +{ + memcpy(dst, (const void __force *)src, count); +} + +static inline void +memcpy_toio(volatile void __iomem *dst, const void *src, size_t count) +{ + memcpy((void __force *)dst, src, count); +} + +/* + * ISA space is 'always mapped' on a typical x86 system, no need to + * explicitly ioremap() it. The fact that the ISA IO space is mapped + * to PAGE_OFFSET is pure coincidence - it does not mean ISA values + * are physical addresses. The following constant pointer can be + * used as the IO-area pointer (it can be iounmapped as well, so the + * analogy with PCI is quite large): + */ +#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET)) + +/* + * Cache management + * + * This needed for two cases + * 1. Out of order aware processors + * 2. Accidentally out of order processors (PPro errata #51) + */ + +static inline void flush_write_buffers(void) +{ +#if defined(CONFIG_X86_PPRO_FENCE) + asm volatile("lock; addl $0,0(%%esp)": : :"memory"); +#endif +} + +#endif /* __KERNEL__ */ -#ifdef CONFIG_X86_32 -# include "io_32.h" +extern void native_io_delay(void); + +extern int io_delay_type; +extern void io_delay_init(void); + +#if defined(CONFIG_PARAVIRT) +#include <asm/paravirt.h> #else -# include "io_64.h" + +static inline void slow_down_io(void) +{ + native_io_delay(); +#ifdef REALLY_SLOW_IO + native_io_delay(); + native_io_delay(); + native_io_delay(); #endif +} + +#endif + +#define BUILDIO(bwl, bw, type) \ +static inline void out##bwl(unsigned type value, int port) \ +{ \ + asm volatile("out" #bwl " %" #bw "0, %w1" \ + : : "a"(value), "Nd"(port)); \ +} \ + \ +static inline unsigned type in##bwl(int port) \ +{ \ + unsigned type value; \ + asm volatile("in" #bwl " %w1, %" #bw "0" \ + : "=a"(value) : "Nd"(port)); \ + return value; \ +} \ + \ +static inline void out##bwl##_p(unsigned type value, int port) \ +{ \ + out##bwl(value, port); \ + slow_down_io(); \ +} \ + \ +static inline unsigned type in##bwl##_p(int port) \ +{ \ + unsigned type value = in##bwl(port); \ + slow_down_io(); \ + return value; \ +} \ + \ +static inline void outs##bwl(int port, const void *addr, unsigned long count) \ +{ \ + asm volatile("rep; outs" #bwl \ + : "+S"(addr), "+c"(count) : "d"(port)); \ +} \ + \ +static inline void ins##bwl(int port, void *addr, unsigned long count) \ +{ \ + asm volatile("rep; ins" #bwl \ + : "+D"(addr), "+c"(count) : "d"(port)); \ +} + +BUILDIO(b, b, char) +BUILDIO(w, w, short) +BUILDIO(l, , int) extern void *xlate_dev_mem_ptr(unsigned long phys); extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr); @@ -186,19 +317,27 @@ extern int ioremap_change_attr(unsigned long vaddr, unsigned long size, unsigned long prot_val); extern void __iomem *ioremap_wc(resource_size_t offset, unsigned long size); -/* - * early_ioremap() and early_iounmap() are for temporary early boot-time - * mappings, before the real ioremap() is functional. - * A boot-time mapping is currently limited to at most 16 pages. - */ -extern void early_ioremap_init(void); -extern void early_ioremap_reset(void); -extern void __iomem *early_ioremap(resource_size_t phys_addr, - unsigned long size); -extern void __iomem *early_memremap(resource_size_t phys_addr, - unsigned long size); -extern void early_iounmap(void __iomem *addr, unsigned long size); +extern bool is_early_ioremap_ptep(pte_t *ptep); + +#ifdef CONFIG_XEN +#include <xen/xen.h> +struct bio_vec; + +extern bool xen_biovec_phys_mergeable(const struct bio_vec *vec1, + const struct bio_vec *vec2); + +#define BIOVEC_PHYS_MERGEABLE(vec1, vec2) \ + (__BIOVEC_PHYS_MERGEABLE(vec1, vec2) && \ + (!xen_domain() || xen_biovec_phys_mergeable(vec1, vec2))) +#endif /* CONFIG_XEN */ #define IO_SPACE_LIMIT 0xffff +#ifdef CONFIG_MTRR +extern int __must_check arch_phys_wc_add(unsigned long base, + unsigned long size); +extern void arch_phys_wc_del(int handle); +#define arch_phys_wc_add arch_phys_wc_add +#endif + #endif /* _ASM_X86_IO_H */ |