aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/boot/compressed/head_64.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/boot/compressed/head_64.S')
-rw-r--r--arch/x86/boot/compressed/head_64.S191
1 files changed, 143 insertions, 48 deletions
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 2c4b171eec3..2884e0c3e8a 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -27,8 +27,6 @@
#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/segment.h>
-#include <asm/pgtable_types.h>
-#include <asm/page_types.h>
#include <asm/boot.h>
#include <asm/msr.h>
#include <asm/processor-flags.h>
@@ -37,6 +35,12 @@
__HEAD
.code32
ENTRY(startup_32)
+ /*
+ * 32bit entry is 0 and it is ABI so immutable!
+ * If we come here directly from a bootloader,
+ * kernel(text+data+bss+brk) ramdisk, zero_page, command line
+ * all need to be under the 4G limit.
+ */
cld
/*
* Test KEEP_SEGMENTS flag to see if the bootloader is asking
@@ -46,7 +50,7 @@ ENTRY(startup_32)
jnz 1f
cli
- movl $(__KERNEL_DS), %eax
+ movl $(__BOOT_DS), %eax
movl %eax, %ds
movl %eax, %es
movl %eax, %ss
@@ -90,9 +94,11 @@ ENTRY(startup_32)
addl %eax, %ebx
notl %eax
andl %eax, %ebx
-#else
- movl $LOAD_PHYSICAL_ADDR, %ebx
+ cmpl $LOAD_PHYSICAL_ADDR, %ebx
+ jge 1f
#endif
+ movl $LOAD_PHYSICAL_ADDR, %ebx
+1:
/* Target address to relocate to for decompression */
addl $z_extract_offset, %ebx
@@ -107,7 +113,8 @@ ENTRY(startup_32)
lgdt gdt(%ebp)
/* Enable PAE mode */
- movl $(X86_CR4_PAE), %eax
+ movl %cr4, %eax
+ orl $X86_CR4_PAE, %eax
movl %eax, %cr4
/*
@@ -154,6 +161,12 @@ ENTRY(startup_32)
btsl $_EFER_LME, %eax
wrmsr
+ /* After gdt is loaded */
+ xorl %eax, %eax
+ lldt %ax
+ movl $0x20, %eax
+ ltr %ax
+
/*
* Setup for the jump to 64bit mode
*
@@ -166,6 +179,13 @@ ENTRY(startup_32)
*/
pushl $__KERNEL_CS
leal startup_64(%ebp), %eax
+#ifdef CONFIG_EFI_MIXED
+ movl efi32_config(%ebp), %ebx
+ cmp $0, %ebx
+ jz 1f
+ leal handover_entry(%ebp), %eax
+1:
+#endif
pushl %eax
/* Enter paged protected Mode, activating Long Mode */
@@ -176,64 +196,97 @@ ENTRY(startup_32)
lret
ENDPROC(startup_32)
-no_longmode:
- /* This isn't an x86-64 CPU so hang */
-1:
- hlt
- jmp 1b
+#ifdef CONFIG_EFI_MIXED
+ .org 0x190
+ENTRY(efi32_stub_entry)
+ add $0x4, %esp /* Discard return address */
+ popl %ecx
+ popl %edx
+ popl %esi
-#include "../../kernel/verify_cpu.S"
+ leal (BP_scratch+4)(%esi), %esp
+ call 1f
+1: pop %ebp
+ subl $1b, %ebp
+
+ movl %ecx, efi32_config(%ebp)
+ movl %edx, efi32_config+8(%ebp)
+ sgdtl efi32_boot_gdt(%ebp)
+
+ leal efi32_config(%ebp), %eax
+ movl %eax, efi_config(%ebp)
+
+ jmp startup_32
+ENDPROC(efi32_stub_entry)
+#endif
- /*
- * Be careful here startup_64 needs to be at a predictable
- * address so I can export it in an ELF header. Bootloaders
- * should look at the ELF header to find this address, as
- * it may change in the future.
- */
.code64
.org 0x200
ENTRY(startup_64)
/*
+ * 64bit entry is 0x200 and it is ABI so immutable!
* We come here either from startup_32 or directly from a
- * 64bit bootloader. If we come here from a bootloader we depend on
- * an identity mapped page table being provied that maps our
- * entire text+data+bss and hopefully all of memory.
+ * 64bit bootloader.
+ * If we come here from a bootloader, kernel(text+data+bss+brk),
+ * ramdisk, zero_page, command line could be above 4G.
+ * We depend on an identity mapped page table being provided
+ * that maps our entire kernel(text+data+bss+brk), zero page
+ * and command line.
*/
#ifdef CONFIG_EFI_STUB
/*
- * The entry point for the PE/COFF executable is 0x210, so only
- * legacy boot loaders will execute this jmp.
+ * The entry point for the PE/COFF executable is efi_pe_entry, so
+ * only legacy boot loaders will execute this jmp.
*/
jmp preferred_addr
- .org 0x210
- mov %rcx, %rdi
- mov %rdx, %rsi
- pushq %rdi
- pushq %rsi
+ENTRY(efi_pe_entry)
+ movq %rcx, efi64_config(%rip) /* Handle */
+ movq %rdx, efi64_config+8(%rip) /* EFI System table pointer */
+
+ leaq efi64_config(%rip), %rax
+ movq %rax, efi_config(%rip)
+
+ call 1f
+1: popq %rbp
+ subq $1b, %rbp
+
+ /*
+ * Relocate efi_config->call().
+ */
+ addq %rbp, efi64_config+88(%rip)
+
+ movq %rax, %rdi
call make_boot_params
cmpq $0,%rax
- je 1f
- mov %rax, %rdx
- popq %rsi
- popq %rdi
+ je fail
+ mov %rax, %rsi
+ leaq startup_32(%rip), %rax
+ movl %eax, BP_code32_start(%rsi)
+ jmp 2f /* Skip the relocation */
- .org 0x230,0x90
+handover_entry:
+ call 1f
+1: popq %rbp
+ subq $1b, %rbp
+
+ /*
+ * Relocate efi_config->call().
+ */
+ movq efi_config(%rip), %rax
+ addq %rbp, 88(%rax)
+2:
+ movq efi_config(%rip), %rdi
call efi_main
movq %rax,%rsi
cmpq $0,%rax
jne 2f
-1:
+fail:
/* EFI init failed, so hang. */
hlt
- jmp 1b
+ jmp fail
2:
- call 3f
-3:
- popq %rax
- subq $3b, %rax
- subq BP_pref_address(%rsi), %rax
- add BP_code32_start(%esi), %eax
+ movl BP_code32_start(%esi), %eax
leaq preferred_addr(%rax), %rax
jmp *%rax
@@ -247,9 +300,6 @@ preferred_addr:
movl %eax, %ss
movl %eax, %fs
movl %eax, %gs
- lldt %ax
- movl $0x20, %eax
- ltr %ax
/*
* Compute the decompressed kernel start address. It is where
@@ -272,9 +322,11 @@ preferred_addr:
addq %rax, %rbp
notq %rax
andq %rax, %rbp
-#else
- movq $LOAD_PHYSICAL_ADDR, %rbp
+ cmpq $LOAD_PHYSICAL_ADDR, %rbp
+ jge 1f
#endif
+ movq $LOAD_PHYSICAL_ADDR, %rbp
+1:
/* Target address to relocate to for decompression */
leaq z_extract_offset(%rbp), %rbx
@@ -306,6 +358,20 @@ preferred_addr:
leaq relocated(%rbx), %rax
jmp *%rax
+#ifdef CONFIG_EFI_STUB
+ .org 0x390
+ENTRY(efi64_stub_entry)
+ movq %rdi, efi64_config(%rip) /* Handle */
+ movq %rsi, efi64_config+8(%rip) /* EFI System table pointer */
+
+ leaq efi64_config(%rip), %rax
+ movq %rax, efi_config(%rip)
+
+ movq %rdx, %rsi
+ jmp handover_entry
+ENDPROC(efi64_stub_entry)
+#endif
+
.text
relocated:
@@ -341,13 +407,23 @@ relocated:
leaq input_data(%rip), %rdx /* input_data */
movl $z_input_len, %ecx /* input_len */
movq %rbp, %r8 /* output target address */
- call decompress_kernel
+ movq $z_output_len, %r9 /* decompressed length */
+ call decompress_kernel /* returns kernel location in %rax */
popq %rsi
/*
* Jump to the decompressed kernel.
*/
- jmp *%rbp
+ jmp *%rax
+
+ .code32
+no_longmode:
+ /* This isn't an x86-64 CPU so hang */
+1:
+ hlt
+ jmp 1b
+
+#include "../../kernel/verify_cpu.S"
.data
gdt:
@@ -361,6 +437,25 @@ gdt:
.quad 0x0000000000000000 /* TS continued */
gdt_end:
+#ifdef CONFIG_EFI_STUB
+efi_config:
+ .quad 0
+
+#ifdef CONFIG_EFI_MIXED
+ .global efi32_config
+efi32_config:
+ .fill 11,8,0
+ .quad efi64_thunk
+ .byte 0
+#endif
+
+ .global efi64_config
+efi64_config:
+ .fill 11,8,0
+ .quad efi_call
+ .byte 1
+#endif /* CONFIG_EFI_STUB */
+
/*
* Stack and heap for uncompression
*/