diff options
Diffstat (limited to 'arch/x86/Kconfig.cpu')
| -rw-r--r-- | arch/x86/Kconfig.cpu | 148 |
1 files changed, 50 insertions, 98 deletions
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 8130334329c..6983314c8b3 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -1,28 +1,27 @@ # Put here option for CPU selection and depending optimization -if !X86_ELAN - choice prompt "Processor family" default M686 if X86_32 default GENERIC_CPU if X86_64 -config M386 - bool "386" - depends on X86_32 && !UML +config M486 + bool "486" + depends on X86_32 ---help--- - This is the processor type of your CPU. This information is used for - optimizing purposes. In order to compile a kernel that can run on - all x86 CPU types (albeit not optimally fast), you can specify - "386" here. + This is the processor type of your CPU. This information is + used for optimizing purposes. In order to compile a kernel + that can run on all supported x86 CPU types (albeit not + optimally fast), you can specify "486" here. + + Note that the 386 is no longer supported, this includes + AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI 486DLC/DLC2, + UMC 486SX-S and the NexGen Nx586. The kernel will not necessarily run on earlier architectures than the one you have chosen, e.g. a Pentium optimized kernel will run on a PPro, but not necessarily on a i486. Here are the settings recommended for greatest speed: - - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI - 486DLC/DLC2, and UMC 486SX-S. Only "386" kernels will run on a 386 - class machine. - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. - "586" for generic Pentium CPUs lacking the TSC @@ -45,16 +44,7 @@ config M386 - "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above). - "VIA C7" for VIA C7. - If you don't know what to do, choose "386". - -config M486 - bool "486" - depends on X86_32 - ---help--- - Select this for a 486 series processor, either Intel or one of the - compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, - DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or - U5S. + If you don't know what to do, choose "486". config M586 bool "586/K5/5x86/6x86/6x86MX" @@ -203,6 +193,14 @@ config MWINCHIP3D stores for this CPU, which can increase performance of some operations. +config MELAN + bool "AMD Elan" + depends on X86_32 + ---help--- + Select this for an AMD Elan processor. + + Do not use this option for K6/Athlon/Opteron processors! + config MGEODEGX1 bool "GeodeGX1" depends on X86_32 @@ -262,6 +260,15 @@ config MCORE2 family in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo) +config MATOM + bool "Intel Atom" + ---help--- + + Select this for the Intel Atom platform. Intel Atom CPUs have an + in-order pipelining architecture and thus can benefit from + accordingly optimized code. Use a recent GCC with specific Atom + support in order to fully benefit from selecting this option. + config GENERIC_CPU bool "Generic-x86-64" depends on X86_64 @@ -283,47 +290,28 @@ config X86_GENERIC This is really intended for distributors who need more generic optimizations. -endif - -config X86_CPU - def_bool y - select GENERIC_FIND_FIRST_BIT - select GENERIC_FIND_NEXT_BIT - # # Define implied options from the CPU selection here -config X86_L1_CACHE_BYTES +config X86_INTERNODE_CACHE_SHIFT int - default "128" if MPSC - default "64" if GENERIC_CPU || MK8 || MCORE2 || X86_32 - -config X86_INTERNODE_CACHE_BYTES - int - default "4096" if X86_VSMP - default X86_L1_CACHE_BYTES if !X86_VSMP - -config X86_CMPXCHG - def_bool X86_64 || (X86_32 && !M386) + default "12" if X86_VSMP + default X86_L1_CACHE_SHIFT config X86_L1_CACHE_SHIFT int default "7" if MPENTIUM4 || MPSC - default "4" if X86_ELAN || M486 || M386 || MGEODEGX1 + default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU + default "4" if MELAN || M486 || MGEODEGX1 default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX - default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 || X86_GENERIC || GENERIC_CPU - -config X86_XADD - def_bool y - depends on X86_32 && !M386 config X86_PPRO_FENCE bool "PentiumPro memory ordering errata workaround" - depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1 + depends on M686 || M586MMX || M586TSC || M586 || M486 || MGEODEGX1 ---help--- Old PentiumPro multiprocessor systems had errata that could cause memory operations to violate the x86 ordering standard in rare cases. Enabling this option will attempt to work around some (but not all) - occurances of this problem, at the cost of much heavier spinlock and + occurrences of this problem, at the cost of much heavier spinlock and memory barrier operations. If unsure, say n here. Even distro kernels should think twice before @@ -331,27 +319,15 @@ config X86_PPRO_FENCE config X86_F00F_BUG def_bool y - depends on M586MMX || M586TSC || M586 || M486 || M386 - -config X86_WP_WORKS_OK - def_bool y - depends on !M386 - -config X86_INVLPG - def_bool y - depends on X86_32 && !M386 - -config X86_BSWAP - def_bool y - depends on X86_32 && !M386 + depends on M586MMX || M586TSC || M586 || M486 -config X86_POPAD_OK +config X86_INVD_BUG def_bool y - depends on X86_32 && !M386 + depends on M486 config X86_ALIGNMENT_16 def_bool y - depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 + depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 config X86_INTEL_USERCOPY def_bool y @@ -359,16 +335,12 @@ config X86_INTEL_USERCOPY config X86_USE_PPRO_CHECKSUM def_bool y - depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2 + depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MVIAC7 || MEFFICEON || MGEODE_LX || MCORE2 || MATOM config X86_USE_3DNOW def_bool y depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML -config X86_OOSTORE - def_bool y - depends on (MWINCHIP3D || MWINCHIPC6) && MTRR - # # P6_NOPs are a relatively minor optimization that require a family >= # 6 processor, except that it is broken on certain VIA chips. @@ -387,31 +359,31 @@ config X86_P6_NOP config X86_TSC def_bool y - depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64 + depends on (MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) || X86_64 config X86_CMPXCHG64 def_bool y - depends on X86_PAE || X86_64 + depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM # this should be set for all -march=.. options where the compiler # generates cmov. config X86_CMOV def_bool y - depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64) + depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM || MGEODE_LX) config X86_MINIMUM_CPU_FAMILY int default "64" if X86_64 default "6" if X86_32 && X86_P6_NOP - default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK) - default "3" + default "5" if X86_32 && X86_CMPXCHG64 + default "4" config X86_DEBUGCTLMSR def_bool y - depends on !(MK6 || MWINCHIPC6 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386) && !UML + depends on !(MK6 || MWINCHIPC6 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486) && !UML menuconfig PROCESSOR_SELECT - bool "Supported processor vendors" if EMBEDDED + bool "Supported processor vendors" if EXPERT ---help--- This lets you choose what x86 vendor support code your kernel will include. @@ -432,7 +404,7 @@ config CPU_SUP_INTEL config CPU_SUP_CYRIX_32 default y bool "Support Cyrix processors" if PROCESSOR_SELECT - depends on !64BIT + depends on M486 || M586 || M586TSC || M586MMX || (EXPERT && !64BIT) ---help--- This enables detection, tunings and quirks for Cyrix processors @@ -486,7 +458,7 @@ config CPU_SUP_TRANSMETA_32 config CPU_SUP_UMC_32 default y bool "Support UMC processors" if PROCESSOR_SELECT - depends on !64BIT + depends on M486 || (EXPERT && !64BIT) ---help--- This enables detection, tunings and quirks for UMC processors @@ -496,23 +468,3 @@ config CPU_SUP_UMC_32 CPU might render the kernel unbootable. If unsure, say N. - -config X86_DS - def_bool X86_PTRACE_BTS - depends on X86_DEBUGCTLMSR - select HAVE_HW_BRANCH_TRACER - -config X86_PTRACE_BTS - bool "Branch Trace Store" - default y - depends on X86_DEBUGCTLMSR - depends on BROKEN - ---help--- - This adds a ptrace interface to the hardware's branch trace store. - - Debuggers may use it to collect an execution trace of the debugged - application in order to answer the question 'how did I get here?'. - Debuggers may trace user mode as well as kernel mode. - - Say Y unless there is no application development on this machine - and you want to save a small amount of code size. |