diff options
Diffstat (limited to 'arch/unicore32/include/asm/pgtable.h')
| -rw-r--r-- | arch/unicore32/include/asm/pgtable.h | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/arch/unicore32/include/asm/pgtable.h b/arch/unicore32/include/asm/pgtable.h new file mode 100644 index 00000000000..ed6f7d000fb --- /dev/null +++ b/arch/unicore32/include/asm/pgtable.h @@ -0,0 +1,310 @@ +/* + * linux/arch/unicore32/include/asm/pgtable.h + * + * Code specific to PKUnity SoC and UniCore ISA + * + * Copyright (C) 2001-2010 GUAN Xue-tao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __UNICORE_PGTABLE_H__ +#define __UNICORE_PGTABLE_H__ + +#include <asm-generic/pgtable-nopmd.h> +#include <asm/cpu-single.h> + +#include <asm/memory.h> +#include <asm/pgtable-hwdef.h> + +/* + * Just any arbitrary offset to the start of the vmalloc VM area: the + * current 8MB value just means that there will be a 8MB "hole" after the + * physical memory until the kernel virtual memory starts. That means that + * any out-of-bounds memory accesses will hopefully be caught. + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) + * + * Note that platforms may override VMALLOC_START, but they must provide + * VMALLOC_END. VMALLOC_END defines the (exclusive) limit of this space, + * which may not overlap IO space. + */ +#ifndef VMALLOC_START +#define VMALLOC_OFFSET SZ_8M +#define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) \ + & ~(VMALLOC_OFFSET-1)) +#define VMALLOC_END (0xff000000UL) +#endif + +#define PTRS_PER_PTE 1024 +#define PTRS_PER_PGD 1024 + +/* + * PGDIR_SHIFT determines what a third-level page table entry can map + */ +#define PGDIR_SHIFT 22 + +#ifndef __ASSEMBLY__ +extern void __pte_error(const char *file, int line, unsigned long val); +extern void __pgd_error(const char *file, int line, unsigned long val); + +#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte)) +#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd)) +#endif /* !__ASSEMBLY__ */ + +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * This is the lowest virtual address we can permit any user space + * mapping to be mapped at. This is particularly important for + * non-high vector CPUs. + */ +#define FIRST_USER_ADDRESS PAGE_SIZE + +#define FIRST_USER_PGD_NR 1 +#define USER_PTRS_PER_PGD ((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR) + +/* + * section address mask and size definitions. + */ +#define SECTION_SHIFT 22 +#define SECTION_SIZE (1UL << SECTION_SHIFT) +#define SECTION_MASK (~(SECTION_SIZE-1)) + +#ifndef __ASSEMBLY__ + +/* + * The pgprot_* and protection_map entries will be fixed up in runtime + * to include the cachable bits based on memory policy, as well as any + * architecture dependent bits. + */ +#define _PTE_DEFAULT (PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE) + +extern pgprot_t pgprot_user; +extern pgprot_t pgprot_kernel; + +#define PAGE_NONE pgprot_user +#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user | PTE_READ \ + | PTE_WRITE)) +#define PAGE_SHARED_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \ + | PTE_WRITE \ + | PTE_EXEC)) +#define PAGE_COPY __pgprot(pgprot_val(pgprot_user | PTE_READ) +#define PAGE_COPY_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \ + | PTE_EXEC)) +#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user | PTE_READ)) +#define PAGE_READONLY_EXEC __pgprot(pgprot_val(pgprot_user | PTE_READ \ + | PTE_EXEC)) +#define PAGE_KERNEL pgprot_kernel +#define PAGE_KERNEL_EXEC __pgprot(pgprot_val(pgprot_kernel | PTE_EXEC)) + +#define __PAGE_NONE __pgprot(_PTE_DEFAULT) +#define __PAGE_SHARED __pgprot(_PTE_DEFAULT | PTE_READ \ + | PTE_WRITE) +#define __PAGE_SHARED_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \ + | PTE_WRITE \ + | PTE_EXEC) +#define __PAGE_COPY __pgprot(_PTE_DEFAULT | PTE_READ) +#define __PAGE_COPY_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \ + | PTE_EXEC) +#define __PAGE_READONLY __pgprot(_PTE_DEFAULT | PTE_READ) +#define __PAGE_READONLY_EXEC __pgprot(_PTE_DEFAULT | PTE_READ \ + | PTE_EXEC) + +#endif /* __ASSEMBLY__ */ + +/* + * The table below defines the page protection levels that we insert into our + * Linux page table version. These get translated into the best that the + * architecture can perform. Note that on UniCore hardware: + * 1) We cannot do execute protection + * 2) If we could do execute protection, then read is implied + * 3) write implies read permissions + */ +#define __P000 __PAGE_NONE +#define __P001 __PAGE_READONLY +#define __P010 __PAGE_COPY +#define __P011 __PAGE_COPY +#define __P100 __PAGE_READONLY_EXEC +#define __P101 __PAGE_READONLY_EXEC +#define __P110 __PAGE_COPY_EXEC +#define __P111 __PAGE_COPY_EXEC + +#define __S000 __PAGE_NONE +#define __S001 __PAGE_READONLY +#define __S010 __PAGE_SHARED +#define __S011 __PAGE_SHARED +#define __S100 __PAGE_READONLY_EXEC +#define __S101 __PAGE_READONLY_EXEC +#define __S110 __PAGE_SHARED_EXEC +#define __S111 __PAGE_SHARED_EXEC + +#ifndef __ASSEMBLY__ +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern struct page *empty_zero_page; +#define ZERO_PAGE(vaddr) (empty_zero_page) + +#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define pfn_pte(pfn, prot) (__pte(((pfn) << PAGE_SHIFT) \ + | pgprot_val(prot))) + +#define pte_none(pte) (!pte_val(pte)) +#define pte_clear(mm, addr, ptep) set_pte(ptep, __pte(0)) +#define pte_page(pte) (pfn_to_page(pte_pfn(pte))) +#define pte_offset_kernel(dir, addr) (pmd_page_vaddr(*(dir)) \ + + __pte_index(addr)) + +#define pte_offset_map(dir, addr) (pmd_page_vaddr(*(dir)) \ + + __pte_index(addr)) +#define pte_unmap(pte) do { } while (0) + +#define set_pte(ptep, pte) cpu_set_pte(ptep, pte) + +#define set_pte_at(mm, addr, ptep, pteval) \ + do { \ + set_pte(ptep, pteval); \ + } while (0) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +#define pte_present(pte) (pte_val(pte) & PTE_PRESENT) +#define pte_write(pte) (pte_val(pte) & PTE_WRITE) +#define pte_dirty(pte) (pte_val(pte) & PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & PTE_YOUNG) +#define pte_exec(pte) (pte_val(pte) & PTE_EXEC) +#define pte_special(pte) (0) + +#define PTE_BIT_FUNC(fn, op) \ +static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } + +PTE_BIT_FUNC(wrprotect, &= ~PTE_WRITE); +PTE_BIT_FUNC(mkwrite, |= PTE_WRITE); +PTE_BIT_FUNC(mkclean, &= ~PTE_DIRTY); +PTE_BIT_FUNC(mkdirty, |= PTE_DIRTY); +PTE_BIT_FUNC(mkold, &= ~PTE_YOUNG); +PTE_BIT_FUNC(mkyoung, |= PTE_YOUNG); + +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +/* + * Mark the prot value as uncacheable. + */ +#define pgprot_noncached(prot) \ + __pgprot(pgprot_val(prot) & ~PTE_CACHEABLE) +#define pgprot_writecombine(prot) \ + __pgprot(pgprot_val(prot) & ~PTE_CACHEABLE) +#define pgprot_dmacoherent(prot) \ + __pgprot(pgprot_val(prot) & ~PTE_CACHEABLE) + +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_present(pmd) (pmd_val(pmd) & PMD_PRESENT) +#define pmd_bad(pmd) (((pmd_val(pmd) & \ + (PMD_PRESENT | PMD_TYPE_MASK)) \ + != (PMD_PRESENT | PMD_TYPE_TABLE))) + +#define set_pmd(pmdpd, pmdval) \ + do { \ + *(pmdpd) = pmdval; \ + } while (0) + +#define pmd_clear(pmdp) \ + do { \ + set_pmd(pmdp, __pmd(0));\ + clean_pmd_entry(pmdp); \ + } while (0) + +#define pmd_page_vaddr(pmd) ((pte_t *)__va(pmd_val(pmd) & PAGE_MASK)) +#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) + +/* to find an entry in a page-table-directory */ +#define pgd_index(addr) ((addr) >> PGDIR_SHIFT) + +#define pgd_offset(mm, addr) ((mm)->pgd+pgd_index(addr)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(addr) pgd_offset(&init_mm, addr) + +/* Find an entry in the third-level page table.. */ +#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + const unsigned long mask = PTE_EXEC | PTE_WRITE | PTE_READ; + pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); + return pte; +} + +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; + +/* + * Encode and decode a swap entry. Swap entries are stored in the Linux + * page tables as follows: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <--------------- offset --------------> <--- type --> 0 0 0 0 0 + * + * This gives us up to 127 swap files and 32GB per swap file. Note that + * the offset field is always non-zero. + */ +#define __SWP_TYPE_SHIFT 5 +#define __SWP_TYPE_BITS 7 +#define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) +#define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) + +#define __swp_type(x) (((x).val >> __SWP_TYPE_SHIFT) \ + & __SWP_TYPE_MASK) +#define __swp_offset(x) ((x).val >> __SWP_OFFSET_SHIFT) +#define __swp_entry(type, offset) ((swp_entry_t) { \ + ((type) << __SWP_TYPE_SHIFT) | \ + ((offset) << __SWP_OFFSET_SHIFT) }) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) + +/* + * It is an error for the kernel to have more swap files than we can + * encode in the PTEs. This ensures that we know when MAX_SWAPFILES + * is increased beyond what we presently support. + */ +#define MAX_SWAPFILES_CHECK() \ + BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) + +/* + * Encode and decode a file entry. File entries are stored in the Linux + * page tables as follows: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <----------------------- offset ----------------------> 1 0 0 0 + */ +#define pte_file(pte) (pte_val(pte) & PTE_FILE) +#define pte_to_pgoff(x) (pte_val(x) >> 4) +#define pgoff_to_pte(x) __pte(((x) << 4) | PTE_FILE) + +#define PTE_FILE_MAX_BITS 28 + +/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ +/* FIXME: this is not correct */ +#define kern_addr_valid(addr) (1) + +#include <asm-generic/pgtable.h> + +#define pgtable_cache_init() do { } while (0) + +#endif /* !__ASSEMBLY__ */ + +#endif /* __UNICORE_PGTABLE_H__ */ |