1 files changed, 38 insertions, 72 deletions

diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
index a1bb59eecc1..1f80a88c75a 100644
--- a/arch/tile/kernel/pci.c
+++ b/arch/tile/kernel/pci.c
@@ -20,7 +20,6 @@
 #include <linux/capability.h>
 #include <linux/sched.h>
 #include <linux/errno.h>
-#include <linux/bootmem.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
@@ -52,6 +51,8 @@
  *
  */
 
+static int pci_probe = 1;
+
 /*
  * This flag tells if the platform is TILEmpower that needs
  * special configuration for the PLX switch chip.
@@ -81,7 +82,7 @@ EXPORT_SYMBOL(pcibios_align_resource);
  * controller_id is the controller number, config type is 0 or 1 for
  * config0 or config1 operations.
  */
-static int __devinit tile_pcie_open(int controller_id, int config_type)
+static int tile_pcie_open(int controller_id, int config_type)
 {
 	char filename[32];
 	int fd;
@@ -97,8 +98,7 @@ static int __devinit tile_pcie_open(int controller_id, int config_type)
 /*
  * Get the IRQ numbers from the HV and set up the handlers for them.
  */
-static int __devinit tile_init_irqs(int controller_id,
-				 struct pci_controller *controller)
+static int tile_init_irqs(int controller_id, struct pci_controller *controller)
 {
 	char filename[32];
 	int fd;
@@ -141,10 +141,15 @@ static int __devinit tile_init_irqs(int controller_id,
  *
  * Returns the number of controllers discovered.
  */
-int __devinit tile_pci_init(void)
+int __init tile_pci_init(void)
 {
 	int i;
 
+	if (!pci_probe) {
+		pr_info("PCI: disabled by boot argument\n");
+		return 0;
+	}
+
 	pr_info("PCI: Searching for controllers...\n");
 
 	/* Re-init number of PCIe controllers to support hot-plug feature. */
@@ -193,7 +198,6 @@ int __devinit tile_pci_init(void)
 			controller->hv_cfg_fd[0] = hv_cfg_fd0;
 			controller->hv_cfg_fd[1] = hv_cfg_fd1;
 			controller->hv_mem_fd = hv_mem_fd;
-			controller->first_busno = 0;
 			controller->last_busno = 0xff;
 			controller->ops = &tile_cfg_ops;
 
@@ -237,7 +241,7 @@ static int tile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 
-static void __devinit fixup_read_and_payload_sizes(void)
+static void fixup_read_and_payload_sizes(void)
 {
 	struct pci_dev *dev = NULL;
 	int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
@@ -245,39 +249,20 @@ static void __devinit fixup_read_and_payload_sizes(void)
 	u16 new_values;
 
 	/* Scan for the smallest maximum payload size. */
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		int pcie_caps_offset;
-		u32 devcap;
-		int max_payload;
-
-		pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
-		if (pcie_caps_offset == 0)
+	for_each_pci_dev(dev) {
+		if (!pci_is_pcie(dev))
 			continue;
 
-		pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP,
-				      &devcap);
-		max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD;
-		if (max_payload < smallest_max_payload)
-			smallest_max_payload = max_payload;
+		if (dev->pcie_mpss < smallest_max_payload)
+			smallest_max_payload = dev->pcie_mpss;
 	}
 
 	/* Now, set the max_payload_size for all devices to that value. */
 	new_values = (max_read_size << 12) | (smallest_max_payload << 5);
-	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
-		int pcie_caps_offset;
-		u16 devctl;
-
-		pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
-		if (pcie_caps_offset == 0)
-			continue;
-
-		pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
-				     &devctl);
-		devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ);
-		devctl |= new_values;
-		pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
-				      devctl);
-	}
+	for_each_pci_dev(dev)
+		pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
+				PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ,
+				new_values);
 }
 
 
@@ -287,7 +272,7 @@ static void __devinit fixup_read_and_payload_sizes(void)
  * The controllers have been set up by the time we get here, by a call to
  * tile_pci_init.
  */
-int __devinit pcibios_init(void)
+int __init pcibios_init(void)
 {
 	int i;
 
@@ -298,7 +283,7 @@ int __devinit pcibios_init(void)
 	 * known to require at least 20ms here, but we use a more
 	 * conservative value.
 	 */
-	mdelay(250);
+	msleep(250);
 
 	/* Scan all of the recorded PCI controllers.  */
 	for (i = 0; i < TILE_NUM_PCIE; i++) {
@@ -310,6 +295,7 @@ int __devinit pcibios_init(void)
 		if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) {
 			struct pci_controller *controller = &controllers[i];
 			struct pci_bus *bus;
+			LIST_HEAD(resources);
 
 			if (tile_init_irqs(i, controller)) {
 				pr_err("PCI: Could not initialize IRQs\n");
@@ -318,18 +304,12 @@ int __devinit pcibios_init(void)
 
 			pr_info("PCI: initializing controller #%d\n", i);
 
-			/*
-			 * This comes from the generic Linux PCI driver.
-			 *
-			 * It reads the PCI tree for this bus into the Linux
-			 * data structures.
-			 *
-			 * This is inlined in linux/pci.h and calls into
-			 * pci_scan_bus_parented() in probe.c.
-			 */
-			bus = pci_scan_bus(0, controller->ops, controller);
+			pci_add_resource(&resources, &ioport_resource);
+			pci_add_resource(&resources, &iomem_resource);
+			bus = pci_scan_root_bus(NULL, 0, controller->ops,
+						controller, &resources);
 			controller->root_bus = bus;
-			controller->last_busno = bus->subordinate;
+			controller->last_busno = bus->busn_res.end;
 		}
 	}
 
@@ -390,7 +370,7 @@ subsys_initcall(pcibios_init);
 /*
  * No bus fixups needed.
  */
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+void pcibios_fixup_bus(struct pci_bus *bus)
 {
 	/* Nothing needs to be done. */
 }
@@ -400,25 +380,17 @@ void pcibios_set_master(struct pci_dev *dev)
 	/* No special bus mastering setup handling. */
 }
 
-/*
- * This can be called from the generic PCI layer, but doesn't need to
- * do anything.
- */
-char __devinit *pcibios_setup(char *str)
+/* Process any "pci=" kernel boot arguments. */
+char *__init pcibios_setup(char *str)
 {
-	/* Nothing needs to be done. */
+	if (!strcmp(str, "off")) {
+		pci_probe = 0;
+		return NULL;
+	}
 	return str;
 }
 
 /*
- * This is called from the generic Linux layer.
- */
-void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
-
-/*
  * Enable memory and/or address decoding, as appropriate, for the
  * device described by the 'dev' struct.
  *
@@ -487,11 +459,8 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
  * specified bus & slot.
  */
 
-static int __devinit tile_cfg_read(struct pci_bus *bus,
-				   unsigned int devfn,
-				   int offset,
-				   int size,
-				   u32 *val)
+static int tile_cfg_read(struct pci_bus *bus, unsigned int devfn, int offset,
+			 int size, u32 *val)
 {
 	struct pci_controller *controller = bus->sysdata;
 	int busnum = bus->number & 0xff;
@@ -533,11 +502,8 @@ static int __devinit tile_cfg_read(struct pci_bus *bus,
  * See tile_cfg_read() for relevant comments.
  * Note that "val" is the value to write, not a pointer to that value.
  */
-static int __devinit tile_cfg_write(struct pci_bus *bus,
-				    unsigned int devfn,
-				    int offset,
-				    int size,
-				    u32 val)
+static int tile_cfg_write(struct pci_bus *bus, unsigned int devfn, int offset,
+			  int size, u32 val)
 {
 	struct pci_controller *controller = bus->sysdata;
 	int busnum = bus->number & 0xff;