diff options
Diffstat (limited to 'arch/tile/kernel/intvec_32.S')
| -rw-r--r-- | arch/tile/kernel/intvec_32.S | 151 |
1 files changed, 62 insertions, 89 deletions
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S index f212bf7cea8..cdbda45a4e4 100644 --- a/arch/tile/kernel/intvec_32.S +++ b/arch/tile/kernel/intvec_32.S @@ -28,20 +28,10 @@ #include <arch/interrupts.h> #include <arch/spr_def.h> -#ifdef CONFIG_PREEMPT -# error "No support for kernel preemption currently" -#endif - #define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg) #define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR) -#if !CHIP_HAS_WH64() - /* By making this an empty macro, we can use wh64 in the code. */ - .macro wh64 reg - .endm -#endif - .macro push_reg reg, ptr=sp, delta=-4 { sw \ptr, \reg @@ -189,7 +179,7 @@ intvec_\vecname: * point sp at the top aligned address on the actual stack page. */ mfspr r0, SPR_SYSTEM_SAVE_K_0 - mm r0, r0, zero, LOG2_THREAD_SIZE, 31 + mm r0, r0, zero, LOG2_NR_CPU_IDS, 31 0: /* @@ -207,6 +197,9 @@ intvec_\vecname: * cache line 1: r14...r29 * cache line 0: 2 x frame, r0..r13 */ +#if STACK_TOP_DELTA != 64 +#error STACK_TOP_DELTA must be 64 for assumptions here and in task_pt_regs() +#endif andi r0, r0, -64 /* @@ -320,24 +313,20 @@ intvec_\vecname: movei r3, 0 } .else - .ifc \c_routine, op_handle_perf_interrupt + .ifc \c_routine, handle_perf_interrupt { mfspr r2, PERF_COUNT_STS movei r3, -1 /* not used, but set for consistency */ } .else -#if CHIP_HAS_AUX_PERF_COUNTERS() - .ifc \c_routine, op_handle_aux_perf_interrupt + .ifc \c_routine, handle_perf_interrupt { mfspr r2, AUX_PERF_COUNT_STS movei r3, -1 /* not used, but set for consistency */ } .else -#endif movei r3, 0 -#if CHIP_HAS_AUX_PERF_COUNTERS() .endif -#endif .endif .endif .endif @@ -354,7 +343,7 @@ intvec_\vecname: #ifdef __COLLECT_LINKER_FEEDBACK__ .pushsection .text.intvec_feedback,"ax" .org (\vecnum << 5) - FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt1, 1 << 8) + FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt, 1 << 8) jrp lr .popsection #endif @@ -468,7 +457,7 @@ intvec_\vecname: } { auli r21, r21, ha16(__per_cpu_offset) - mm r20, r20, zero, 0, LOG2_THREAD_SIZE-1 + mm r20, r20, zero, 0, LOG2_NR_CPU_IDS-1 } s2a r20, r20, r21 lw tp, r20 @@ -562,7 +551,6 @@ intvec_\vecname: .endif mtspr INTERRUPT_CRITICAL_SECTION, zero -#if CHIP_HAS_WH64() /* * Prepare the first 256 stack bytes to be rapidly accessible * without having to fetch the background data. We don't really @@ -583,7 +571,6 @@ intvec_\vecname: addi r52, r52, -64 } wh64 r52 -#endif #ifdef CONFIG_TRACE_IRQFLAGS .ifnc \function,handle_nmi @@ -762,7 +749,7 @@ intvec_\vecname: .macro dc_dispatch vecnum, vecname .org (\vecnum << 8) intvec_\vecname: - j hv_downcall_dispatch + j _hv_downcall_dispatch ENDPROC(intvec_\vecname) .endm @@ -812,17 +799,37 @@ STD_ENTRY(interrupt_return) } lw r29, r29 andi r29, r29, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ + bzt r29, .Lresume_userspace + +#ifdef CONFIG_PREEMPT + /* Returning to kernel space. Check if we need preemption. */ + GET_THREAD_INFO(r29) + addli r28, r29, THREAD_INFO_FLAGS_OFFSET { - bzt r29, .Lresume_userspace - PTREGS_PTR(r29, PTREGS_OFFSET_PC) + lw r28, r28 + addli r29, r29, THREAD_INFO_PREEMPT_COUNT_OFFSET + } + { + andi r28, r28, _TIF_NEED_RESCHED + lw r29, r29 } + bzt r28, 1f + bnz r29, 1f + /* Disable interrupts explicitly for preemption. */ + IRQ_DISABLE(r20,r21) + TRACE_IRQS_OFF + jal preempt_schedule_irq + FEEDBACK_REENTER(interrupt_return) +1: +#endif /* If we're resuming to _cpu_idle_nap, bump PC forward by 8. */ { - lw r28, r29 + PTREGS_PTR(r29, PTREGS_OFFSET_PC) moveli r27, lo16(_cpu_idle_nap) } { + lw r28, r29 auli r27, r27, ha16(_cpu_idle_nap) } { @@ -939,6 +946,13 @@ STD_ENTRY(interrupt_return) bzt r30, .Lrestore_regs 3: + /* We are relying on INT_PERF_COUNT at 33, and AUX_PERF_COUNT at 48 */ + { + moveli r0, lo16(1 << (INT_PERF_COUNT - 32)) + bz r31, .Lrestore_regs + } + auli r0, r0, ha16(1 << (INT_AUX_PERF_COUNT - 32)) + mtspr SPR_INTERRUPT_MASK_RESET_K_1, r0 /* * We now commit to returning from this interrupt, since we will be @@ -1164,6 +1178,10 @@ handle_nmi: PTREGS_PTR(r0, PTREGS_OFFSET_BASE) } FEEDBACK_REENTER(handle_nmi) + { + movei r30, 1 + seq r31, r0, zero + } j interrupt_return STD_ENDPROC(handle_nmi) @@ -1201,7 +1219,10 @@ handle_syscall: lw r30, r31 andi r30, r30, _TIF_SYSCALL_TRACE bzt r30, .Lrestore_syscall_regs - jal do_syscall_trace + { + PTREGS_PTR(r0, PTREGS_OFFSET_BASE) + jal do_syscall_trace_enter + } FEEDBACK_REENTER(handle_syscall) /* @@ -1252,7 +1273,10 @@ handle_syscall: lw r30, r31 andi r30, r30, _TIF_SYSCALL_TRACE bzt r30, 1f - jal do_syscall_trace + { + PTREGS_PTR(r0, PTREGS_OFFSET_BASE) + jal do_syscall_trace_exit + } FEEDBACK_REENTER(handle_syscall) 1: { movei r30, 0 /* not an NMI */ @@ -1414,7 +1438,6 @@ handle_ill: { lw r0, r0 /* indirect thru thread_info to get task_info*/ addi r1, sp, C_ABI_SAVE_AREA_SIZE /* put ptregs pointer into r1 */ - move r2, zero /* load error code into r2 */ } jal send_sigtrap /* issue a SIGTRAP */ @@ -1512,12 +1535,10 @@ STD_ENTRY(_sys_clone) __HEAD .align 64 /* Align much later jump on the start of a cache line. */ -#if !ATOMIC_LOCKS_FOUND_VIA_TABLE() nop #if PAGE_SIZE >= 0x10000 nop #endif -#endif ENTRY(sys_cmpxchg) /* @@ -1551,45 +1572,6 @@ ENTRY(sys_cmpxchg) # error Code here assumes PAGE_OFFSET can be loaded with just hi16() #endif -#if ATOMIC_LOCKS_FOUND_VIA_TABLE() - { - /* Check for unaligned input. */ - bnz sp, .Lcmpxchg_badaddr - mm r25, r0, zero, 3, PAGE_SHIFT-1 - } - { - crc32_32 r25, zero, r25 - moveli r21, lo16(atomic_lock_ptr) - } - { - auli r21, r21, ha16(atomic_lock_ptr) - auli r23, zero, hi16(PAGE_OFFSET) /* hugepage-aligned */ - } - { - shri r20, r25, 32 - ATOMIC_HASH_L1_SHIFT - slt_u r23, r0, r23 - lw r26, r0 /* see comment in the "#else" for the "lw r26". */ - } - { - s2a r21, r20, r21 - bbns r23, .Lcmpxchg_badaddr - } - { - lw r21, r21 - seqi r23, TREG_SYSCALL_NR_NAME, __NR_FAST_cmpxchg64 - andi r25, r25, ATOMIC_HASH_L2_SIZE - 1 - } - { - /* Branch away at this point if we're doing a 64-bit cmpxchg. */ - bbs r23, .Lcmpxchg64 - andi r23, r0, 7 /* Precompute alignment for cmpxchg64. */ - } - { - s2a ATOMIC_LOCK_REG_NAME, r25, r21 - j .Lcmpxchg32_tns /* see comment in the #else for the jump. */ - } - -#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ { /* Check for unaligned input. */ bnz sp, .Lcmpxchg_badaddr @@ -1603,7 +1585,7 @@ ENTRY(sys_cmpxchg) * Because of C pointer arithmetic, we want to compute this: * * ((char*)atomic_locks + - * (((r0 >> 3) & (1 << (ATOMIC_HASH_SIZE - 1))) << 2)) + * (((r0 >> 3) & ((1 << ATOMIC_HASH_SHIFT) - 1)) << 2)) * * Instead of two shifts we just ">> 1", and use 'mm' * to ignore the low and high bits we don't want. @@ -1614,12 +1596,9 @@ ENTRY(sys_cmpxchg) /* * Ensure that the TLB is loaded before we take out the lock. - * On tilepro, this will start fetching the value all the way - * into our L1 as well (and if it gets modified before we - * grab the lock, it will be invalidated from our cache - * before we reload it). On tile64, we'll start fetching it - * into our L1 if we're the home, and if we're not, we'll - * still at least start fetching it into the home's L2. + * This will start fetching the value all the way into our L1 + * as well (and if it gets modified before we grab the lock, + * it will be invalidated from our cache before we reload it). */ lw r26, r0 } @@ -1662,8 +1641,6 @@ ENTRY(sys_cmpxchg) j .Lcmpxchg32_tns } -#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ - /* Symbol for do_page_fault_ics() to use to compare against the PC. */ .global __sys_cmpxchg_grab_lock __sys_cmpxchg_grab_lock: @@ -1801,9 +1778,6 @@ __sys_cmpxchg_grab_lock: .align 64 .Lcmpxchg64: { -#if ATOMIC_LOCKS_FOUND_VIA_TABLE() - s2a ATOMIC_LOCK_REG_NAME, r25, r21 -#endif bzt r23, .Lcmpxchg64_tns } j .Lcmpxchg_badaddr @@ -1869,11 +1843,12 @@ int_unalign: push_extra_callee_saves r0 j do_trap -/* Include .intrpt1 array of interrupt vectors */ - .section ".intrpt1", "ax" +/* Include .intrpt array of interrupt vectors */ + .section ".intrpt", "ax" -#define op_handle_perf_interrupt bad_intr -#define op_handle_aux_perf_interrupt bad_intr +#ifndef CONFIG_USE_PMC +#define handle_perf_interrupt bad_intr +#endif #ifndef CONFIG_HARDWALL #define do_hardwall_trap bad_intr @@ -1914,7 +1889,7 @@ int_unalign: int_hand INT_IDN_AVAIL, IDN_AVAIL, bad_intr int_hand INT_UDN_AVAIL, UDN_AVAIL, bad_intr int_hand INT_PERF_COUNT, PERF_COUNT, \ - op_handle_perf_interrupt, handle_nmi + handle_perf_interrupt, handle_nmi int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr #if CONFIG_KERNEL_PL == 2 dc_dispatch INT_INTCTRL_2, INTCTRL_2 @@ -1938,10 +1913,8 @@ int_unalign: do_page_fault int_hand INT_SN_CPL, SN_CPL, bad_intr int_hand INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap -#if CHIP_HAS_AUX_PERF_COUNTERS() int_hand INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \ - op_handle_aux_perf_interrupt, handle_nmi -#endif + handle_perf_interrupt, handle_nmi /* Synthetic interrupt delivered only by the simulator */ int_hand INT_BREAKPOINT, BREAKPOINT, do_breakpoint |