diff options
Diffstat (limited to 'arch/sparc/kernel/pcic.c')
| -rw-r--r-- | arch/sparc/kernel/pcic.c | 189 |
1 files changed, 38 insertions, 151 deletions
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index fcc148effaa..6cc78c213c0 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -36,6 +36,7 @@ #include <asm/uaccess.h> #include <asm/irq_regs.h> +#include "kernel.h" #include "irq.h" /* @@ -162,8 +163,8 @@ static int pcic0_up; static struct linux_pcic pcic0; void __iomem *pcic_regs; -volatile int pcic_speculative; -volatile int pcic_trapped; +static volatile int pcic_speculative; +static volatile int pcic_trapped; /* forward */ unsigned int pcic_build_device_irq(struct platform_device *op, @@ -329,7 +330,7 @@ int __init pcic_probe(void) pcic->pcic_res_cfg_addr.name = "pcic_cfg_addr"; if ((pcic->pcic_config_space_addr = - ioremap(regs[2].phys_addr, regs[2].reg_size * 2)) == 0) { + ioremap(regs[2].phys_addr, regs[2].reg_size * 2)) == NULL) { prom_printf("PCIC: Error, cannot map " "PCI Configuration Space Address.\n"); prom_halt(); @@ -341,7 +342,7 @@ int __init pcic_probe(void) */ pcic->pcic_res_cfg_data.name = "pcic_cfg_data"; if ((pcic->pcic_config_space_data = - ioremap(regs[3].phys_addr, regs[3].reg_size * 2)) == 0) { + ioremap(regs[3].phys_addr, regs[3].reg_size * 2)) == NULL) { prom_printf("PCIC: Error, cannot map " "PCI Configuration Space Data.\n"); prom_halt(); @@ -353,7 +354,6 @@ int __init pcic_probe(void) strcpy(pbm->prom_name, namebuf); { - extern volatile int t_nmi[4]; extern int pcic_nmi_trap_patch[4]; t_nmi[0] = pcic_nmi_trap_patch[0]; @@ -439,8 +439,7 @@ int pcic_present(void) return pcic0_up; } -static int __devinit pdev_to_pnode(struct linux_pbm_info *pbm, - struct pci_dev *pdev) +static int pdev_to_pnode(struct linux_pbm_info *pbm, struct pci_dev *pdev) { struct linux_prom_pci_registers regs[PROMREG_MAX]; int err; @@ -537,7 +536,7 @@ pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node) prom_getstring(node, "name", namebuf, sizeof(namebuf)); } - if ((p = pcic->pcic_imap) == 0) { + if ((p = pcic->pcic_imap) == NULL) { dev->irq = 0; return; } @@ -595,7 +594,7 @@ pcic_fill_irq(struct linux_pcic *pcic, struct pci_dev *dev, int node) /* * Normally called from {do_}pci_scan_bus... */ -void __devinit pcibios_fixup_bus(struct pci_bus *bus) +void pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev; int i, has_io, has_mem; @@ -671,30 +670,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) } } -/* - * pcic_pin_to_irq() is exported to bus probing code - */ -unsigned int -pcic_pin_to_irq(unsigned int pin, const char *name) -{ - struct linux_pcic *pcic = &pcic0; - unsigned int irq; - unsigned int ivec; - - if (pin < 4) { - ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_LO); - irq = ivec >> (pin << 2) & 0xF; - } else if (pin < 8) { - ivec = readw(pcic->pcic_regs+PCI_INT_SELECT_HI); - irq = ivec >> ((pin-4) << 2) & 0xF; - } else { /* Corrupted map */ - printk("PCIC: BAD PIN %d FOR %s\n", pin, name); - for (;;) {} /* XXX Cannot panic properly in case of PROLL */ - } -/* P3 */ /* printk("PCIC: dev %s pin %d ivec 0x%x irq %x\n", name, pin, ivec, irq); */ - return irq; -} - /* Makes compiler happy */ static volatile int pcic_timer_dummy; @@ -703,31 +678,28 @@ static void pcic_clear_clock_irq(void) pcic_timer_dummy = readl(pcic0.pcic_regs+PCI_SYS_LIMIT); } -static irqreturn_t pcic_timer_handler (int irq, void *h) +/* CPU frequency is 100 MHz, timer increments every 4 CPU clocks */ +#define USECS_PER_JIFFY (1000000 / HZ) +#define TICK_TIMER_LIMIT ((100 * 1000000 / 4) / HZ) + +static unsigned int pcic_cycles_offset(void) { - pcic_clear_clock_irq(); - xtime_update(1); -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif - return IRQ_HANDLED; -} + u32 value, count; -#define USECS_PER_JIFFY 10000 /* We have 100HZ "standard" timer for sparc */ -#define TICK_TIMER_LIMIT ((100*1000000/4)/100) + value = readl(pcic0.pcic_regs + PCI_SYS_COUNTER); + count = value & ~PCI_SYS_COUNTER_OVERFLOW; -u32 pci_gettimeoffset(void) -{ + if (value & PCI_SYS_COUNTER_OVERFLOW) + count += TICK_TIMER_LIMIT; /* - * We divide all by 100 + * We divide all by HZ * to have microsecond resolution and to avoid overflow */ - unsigned long count = - readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW; - count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100); - return count * 1000; -} + count = ((count / HZ) * USECS_PER_JIFFY) / (TICK_TIMER_LIMIT / HZ); + /* Coordinate with the sparc_config.clock_rate setting */ + return count * 2; +} void __init pci_time_init(void) { @@ -736,9 +708,16 @@ void __init pci_time_init(void) int timer_irq, irq; int err; - do_arch_gettimeoffset = pci_gettimeoffset; - - btfixup(); +#ifndef CONFIG_SMP + /* + * The clock_rate is in SBUS dimension. + * We take into account this in pcic_cycles_offset() + */ + sparc_config.clock_rate = SBUS_CLOCK_RATE / HZ; + sparc_config.features |= FEAT_L10_CLOCKEVENT; +#endif + sparc_config.features |= FEAT_L10_CLOCKSOURCE; + sparc_config.get_cycles_offset = pcic_cycles_offset; writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT); /* PROM should set appropriate irq */ @@ -747,7 +726,7 @@ void __init pci_time_init(void) writel (PCI_COUNTER_IRQ_SET(timer_irq, 0), pcic->pcic_regs+PCI_COUNTER_IRQ); irq = pcic_build_device_irq(NULL, timer_irq); - err = request_irq(irq, pcic_timer_handler, + err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL); if (err) { prom_printf("time_init: unable to attach IRQ%d\n", timer_irq); @@ -763,14 +742,6 @@ static void watchdog_reset() { } #endif -/* - * Other archs parse arguments here. - */ -char * __devinit pcibios_setup(char *str) -{ - return str; -} - resource_size_t pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { @@ -788,7 +759,7 @@ int pcibios_enable_device(struct pci_dev *pdev, int mask) void pcic_nmi(unsigned int pend, struct pt_regs *regs) { - pend = flip_dword(pend); + pend = swab32(pend); if (!pcic_speculative || (pend & PCI_SYS_INT_PENDING_PIO) == 0) { /* @@ -875,93 +846,9 @@ static void pcic_load_profile_irq(int cpu, unsigned int limit) void __init sun4m_pci_init_IRQ(void) { - sparc_irq_config.build_device_irq = pcic_build_device_irq; - - BTFIXUPSET_CALL(clear_clock_irq, pcic_clear_clock_irq, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(load_profile_irq, pcic_load_profile_irq, BTFIXUPCALL_NORM); -} - -int pcibios_assign_resource(struct pci_dev *pdev, int resource) -{ - return -ENXIO; -} - -/* - * This probably belongs here rather than ioport.c because - * we do not want this crud linked into SBus kernels. - * Also, think for a moment about likes of floppy.c that - * include architecture specific parts. They may want to redefine ins/outs. - * - * We do not use horrible macros here because we want to - * advance pointer by sizeof(size). - */ -void outsb(unsigned long addr, const void *src, unsigned long count) -{ - while (count) { - count -= 1; - outb(*(const char *)src, addr); - src += 1; - /* addr += 1; */ - } -} -EXPORT_SYMBOL(outsb); - -void outsw(unsigned long addr, const void *src, unsigned long count) -{ - while (count) { - count -= 2; - outw(*(const short *)src, addr); - src += 2; - /* addr += 2; */ - } -} -EXPORT_SYMBOL(outsw); - -void outsl(unsigned long addr, const void *src, unsigned long count) -{ - while (count) { - count -= 4; - outl(*(const long *)src, addr); - src += 4; - /* addr += 4; */ - } -} -EXPORT_SYMBOL(outsl); - -void insb(unsigned long addr, void *dst, unsigned long count) -{ - while (count) { - count -= 1; - *(unsigned char *)dst = inb(addr); - dst += 1; - /* addr += 1; */ - } -} -EXPORT_SYMBOL(insb); - -void insw(unsigned long addr, void *dst, unsigned long count) -{ - while (count) { - count -= 2; - *(unsigned short *)dst = inw(addr); - dst += 2; - /* addr += 2; */ - } -} -EXPORT_SYMBOL(insw); - -void insl(unsigned long addr, void *dst, unsigned long count) -{ - while (count) { - count -= 4; - /* - * XXX I am sure we are in for an unaligned trap here. - */ - *(unsigned long *)dst = inl(addr); - dst += 4; - /* addr += 4; */ - } + sparc_config.build_device_irq = pcic_build_device_irq; + sparc_config.clear_clock_irq = pcic_clear_clock_irq; + sparc_config.load_profile_irq = pcic_load_profile_irq; } -EXPORT_SYMBOL(insl); subsys_initcall(pcic_init); |
