diff options
Diffstat (limited to 'arch/sparc/include/asm/timer_32.h')
| -rw-r--r-- | arch/sparc/include/asm/timer_32.h | 111 |
1 files changed, 24 insertions, 87 deletions
diff --git a/arch/sparc/include/asm/timer_32.h b/arch/sparc/include/asm/timer_32.h index 361e53898dd..f8e708a0aa5 100644 --- a/arch/sparc/include/asm/timer_32.h +++ b/arch/sparc/include/asm/timer_32.h @@ -8,100 +8,37 @@ #ifndef _SPARC_TIMER_H #define _SPARC_TIMER_H -#include <asm/system.h> /* For SUN4M_NCPUS */ -#include <asm/sun4paddr.h> -#include <asm/btfixup.h> +#include <linux/clocksource.h> +#include <linux/irqreturn.h> -/* Timer structures. The interrupt timer has two properties which - * are the counter (which is handled in do_timer in sched.c) and the limit. - * This limit is where the timer's counter 'wraps' around. Oddly enough, - * the sun4c timer when it hits the limit wraps back to 1 and not zero - * thus when calculating the value at which it will fire a microsecond you - * must adjust by one. Thanks SUN for designing such great hardware ;( - */ +#include <asm-generic/percpu.h> -/* Note that I am only going to use the timer that interrupts at - * Sparc IRQ 10. There is another one available that can fire at - * IRQ 14. Currently it is left untouched, we keep the PROM's limit - * register value and let the prom take these interrupts. This allows - * L1-A to work. - */ +#include <asm/cpu_type.h> /* For SUN4M_NCPUS */ -struct sun4c_timer_info { - __volatile__ unsigned int cur_count10; - __volatile__ unsigned int timer_limit10; - __volatile__ unsigned int cur_count14; - __volatile__ unsigned int timer_limit14; -}; +#define SBUS_CLOCK_RATE 2000000 /* 2MHz */ +#define TIMER_VALUE_SHIFT 9 +#define TIMER_VALUE_MASK 0x3fffff +#define TIMER_LIMIT_BIT (1 << 31) /* Bit 31 in Counter-Timer register */ -#define SUN4C_TIMER_PHYSADDR 0xf3000000 -#ifdef CONFIG_SUN4 -#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR -#else -#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR -#endif - -/* A sun4m has two blocks of registers which are probably of the same - * structure. LSI Logic's L64851 is told to _decrement_ from the limit - * value. Aurora behaves similarly but its limit value is compacted in - * other fashion (it's wider). Documented fields are defined here. - */ - -/* As with the interrupt register, we have two classes of timer registers - * which are per-cpu and master. Per-cpu timers only hit that cpu and are - * only level 14 ticks, master timer hits all cpus and is level 10. +/* The counter timer register has the value offset by 9 bits. + * From sun4m manual: + * When a counter reaches the value in the corresponding limit register, + * the Limit bit is set and the counter is set to 500 nS (i.e. 0x00000200). + * + * To compensate for this add one to the value. */ +static inline unsigned int timer_value(unsigned int value) +{ + return (value + 1) << TIMER_VALUE_SHIFT; +} -#define SUN4M_PRM_CNT_L 0x80000000 -#define SUN4M_PRM_CNT_LVALUE 0x7FFFFC00 - -struct sun4m_timer_percpu_info { - __volatile__ unsigned int l14_timer_limit; /* Initial value is 0x009c4000 */ - __volatile__ unsigned int l14_cur_count; - - /* This register appears to be write only and/or inaccessible - * on Uni-Processor sun4m machines. - */ - __volatile__ unsigned int l14_limit_noclear; /* Data access error is here */ +extern volatile u32 __iomem *master_l10_counter; - __volatile__ unsigned int cntrl; /* =1 after POST on Aurora */ - __volatile__ unsigned char space[PAGE_SIZE - 16]; -}; +irqreturn_t notrace timer_interrupt(int dummy, void *dev_id); -struct sun4m_timer_regs { - struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS]; - volatile unsigned int l10_timer_limit; - volatile unsigned int l10_cur_count; - - /* Again, this appears to be write only and/or inaccessible - * on uni-processor sun4m machines. - */ - volatile unsigned int l10_limit_noclear; - - /* This register too, it must be magic. */ - volatile unsigned int foobar; - - volatile unsigned int cfg; /* equals zero at boot time... */ -}; - -#define SUN4D_PRM_CNT_L 0x80000000 -#define SUN4D_PRM_CNT_LVALUE 0x7FFFFC00 - -struct sun4d_timer_regs { - volatile unsigned int l10_timer_limit; - volatile unsigned int l10_cur_countx; - volatile unsigned int l10_limit_noclear; - volatile unsigned int ctrl; - volatile unsigned int l10_cur_count; -}; - -extern struct sun4d_timer_regs *sun4d_timers; - -extern __volatile__ unsigned int *master_l10_counter; -extern __volatile__ unsigned int *master_l10_limit; - -/* FIXME: Make do_[gs]ettimeofday btfixup calls */ -BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv) -#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv) +#ifdef CONFIG_SMP +DECLARE_PER_CPU(struct clock_event_device, sparc32_clockevent); +void register_percpu_ce(int cpu); +#endif #endif /* !(_SPARC_TIMER_H) */ |