diff options
Diffstat (limited to 'arch/sparc/include/asm/signal.h')
| -rw-r--r-- | arch/sparc/include/asm/signal.h | 212 |
1 files changed, 207 insertions, 5 deletions
diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h index 27ab05dc203..41535e77b25 100644 --- a/arch/sparc/include/asm/signal.h +++ b/arch/sparc/include/asm/signal.h @@ -1,8 +1,210 @@ -#ifndef ___ASM_SPARC_SIGNAL_H -#define ___ASM_SPARC_SIGNAL_H -#if defined(__sparc__) && defined(__arch64__) -#include <asm/signal_64.h> +#ifndef __SPARC_SIGNAL_H +#define __SPARC_SIGNAL_H + +#include <asm/sigcontext.h> +#include <linux/compiler.h> + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +#include <linux/personality.h> +#include <linux/types.h> +#endif +#endif + +/* On the Sparc the signal handlers get passed a 'sub-signal' code + * for certain signal types, which we document here. + */ +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SUBSIG_STACK 0 +#define SUBSIG_ILLINST 2 +#define SUBSIG_PRIVINST 3 +#define SUBSIG_BADTRAP(t) (0x80 + (t)) + +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 + +#define SIGEMT 7 +#define SUBSIG_TAG 10 + +#define SIGFPE 8 +#define SUBSIG_FPDISABLED 0x400 +#define SUBSIG_FPERROR 0x404 +#define SUBSIG_FPINTOVFL 0x001 +#define SUBSIG_FPSTSIG 0x002 +#define SUBSIG_IDIVZERO 0x014 +#define SUBSIG_FPINEXACT 0x0c4 +#define SUBSIG_FPDIVZERO 0x0c8 +#define SUBSIG_FPUNFLOW 0x0cc +#define SUBSIG_FPOPERROR 0x0d0 +#define SUBSIG_FPOVFLOW 0x0d4 + +#define SIGKILL 9 +#define SIGBUS 10 +#define SUBSIG_BUSTIMEOUT 1 +#define SUBSIG_ALIGNMENT 2 +#define SUBSIG_MISCERROR 5 + +#define SIGSEGV 11 +#define SUBSIG_NOMAPPING 3 +#define SUBSIG_PROTECTION 4 +#define SUBSIG_SEGERROR 5 + +#define SIGSYS 12 + +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGURG 16 + +/* SunOS values which deviate from the Linux/i386 ones */ +#define SIGSTOP 17 +#define SIGTSTP 18 +#define SIGCONT 19 +#define SIGCHLD 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGIO 23 +#define SIGPOLL SIGIO /* SysV name for SIGIO */ +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGLOST 29 +#define SIGPWR SIGLOST +#define SIGUSR1 30 +#define SIGUSR2 31 + +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define __OLD_NSIG 32 +#define __NEW_NSIG 64 +#define _NSIG_BPW 64 +#define _NSIG_WORDS (__NEW_NSIG / _NSIG_BPW) + +#define SIGRTMIN 32 +#define SIGRTMAX __NEW_NSIG + +#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__) +#define _NSIG __NEW_NSIG +#define __new_sigset_t sigset_t +#define __new_sigaction sigaction +#define __new_sigaction32 sigaction32 +#define __old_sigset_t old_sigset_t +#define __old_sigaction old_sigaction +#define __old_sigaction32 old_sigaction32 #else -#include <asm/signal_32.h> +#define _NSIG __OLD_NSIG +#define NSIG _NSIG +#define __old_sigset_t sigset_t +#define __old_sigaction sigaction +#define __old_sigaction32 sigaction32 #endif + +#ifndef __ASSEMBLY__ + +typedef unsigned long __old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} __new_sigset_t; + +/* A SunOS sigstack */ +struct sigstack { + /* XXX 32-bit pointers pinhead XXX */ + char *the_stack; + int cur_status; +}; + +/* Sigvec flags */ +#define _SV_SSTACK 1u /* This signal handler should use sig-stack */ +#define _SV_INTR 2u /* Sig return should not restart system call */ +#define _SV_RESET 4u /* Set handler to SIG_DFL upon taken signal */ +#define _SV_IGNCHILD 8u /* Do not send SIGCHLD */ + +/* + * sa_flags values: SA_STACK is not currently supported, but will allow the + * usage of signal stacks by using the (now obsolete) sa_restorer field in + * the sigaction structure as a stack pointer. This is now possible due to + * the changes in signal handling. LBT 010493. + * SA_RESTART flag to get restarting signals (which were the default long ago) + */ +#define SA_NOCLDSTOP _SV_IGNCHILD +#define SA_STACK _SV_SSTACK +#define SA_ONSTACK _SV_SSTACK +#define SA_RESTART _SV_INTR +#define SA_ONESHOT _SV_RESET +#define SA_NOMASK 0x20u +#define SA_NOCLDWAIT 0x100u +#define SA_SIGINFO 0x200u + + +#define SIG_BLOCK 0x01 /* for blocking signals */ +#define SIG_UNBLOCK 0x02 /* for unblocking signals */ +#define SIG_SETMASK 0x04 /* for setting the signal mask */ + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 4096 +#define SIGSTKSZ 16384 + +#ifdef __KERNEL__ +/* + * DJHR + * SA_STATIC_ALLOC is used for the sparc32 system to indicate that this + * interrupt handler's irq structure should be statically allocated + * by the request_irq routine. + * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge + * of interrupt usage and that sucks. Also without a flag like this + * it may be possible for the free_irq routine to attempt to free + * statically allocated data.. which is NOT GOOD. + * + */ +#define SA_STATIC_ALLOC 0x8000 #endif + +#include <asm-generic/signal.h> + +struct __new_sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + __sigrestore_t sa_restorer; /* not used by Linux/SPARC yet */ + __new_sigset_t sa_mask; +}; + +struct __old_sigaction { + __sighandler_t sa_handler; + __old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); /* not used by Linux/SPARC yet */ +}; + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ + +struct k_sigaction { + struct __new_sigaction sa; + void __user *ka_restorer; +}; + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* !(__KERNEL__) */ + +#endif /* !(__ASSEMBLY__) */ + +#endif /* !(__SPARC_SIGNAL_H) */ |