diff options
Diffstat (limited to 'arch/sh/kernel/entry.S')
| -rw-r--r-- | arch/sh/kernel/entry.S | 1154 |
1 files changed, 0 insertions, 1154 deletions
diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S deleted file mode 100644 index fb6368159dd..00000000000 --- a/arch/sh/kernel/entry.S +++ /dev/null @@ -1,1154 +0,0 @@ -/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $ - * - * linux/arch/sh/entry.S - * - * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - */ - -#include <linux/sys.h> -#include <linux/linkage.h> -#include <linux/config.h> -#include <asm/asm-offsets.h> -#include <asm/thread_info.h> -#include <asm/unistd.h> - -#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE) -#define sys_nfsservctl sys_ni_syscall -#endif - -#if !defined(CONFIG_MMU) -#define sys_madvise sys_ni_syscall -#define sys_readahead sys_ni_syscall -#define sys_mprotect sys_ni_syscall -#define sys_msync sys_ni_syscall -#define sys_mlock sys_ni_syscall -#define sys_munlock sys_ni_syscall -#define sys_mlockall sys_ni_syscall -#define sys_munlockall sys_ni_syscall -#define sys_mremap sys_ni_syscall -#define sys_mincore sys_ni_syscall -#define sys_remap_file_pages sys_ni_syscall -#endif - -! NOTE: -! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address -! to be jumped is too far, but it causes illegal slot exception. - -/* - * entry.S contains the system-call and fault low-level handling routines. - * This also contains the timer-interrupt handler, as well as all interrupts - * and faults that can result in a task-switch. - * - * NOTE: This code handles signal-recognition, which happens every time - * after a timer-interrupt and after each system call. - * - * NOTE: This code uses a convention that instructions in the delay slot - * of a transfer-control instruction are indented by an extra space, thus: - * - * jmp @k0 ! control-transfer instruction - * ldc k1, ssr ! delay slot - * - * Stack layout in 'ret_from_syscall': - * ptrace needs to have all regs on the stack. - * if the order here is changed, it needs to be - * updated in ptrace.c and ptrace.h - * - * r0 - * ... - * r15 = stack pointer - * spc - * pr - * ssr - * gbr - * mach - * macl - * syscall # - * - */ - -ENOSYS = 38 -EINVAL = 22 - -#if defined(CONFIG_CPU_SH3) -TRA = 0xffffffd0 -EXPEVT = 0xffffffd4 -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) -INTEVT = 0xa4000000 ! INTEVTE2(0xa4000000) -#else -INTEVT = 0xffffffd8 -#endif -MMU_TEA = 0xfffffffc ! TLB Exception Address Register -#elif defined(CONFIG_CPU_SH4) -TRA = 0xff000020 -EXPEVT = 0xff000024 -INTEVT = 0xff000028 -MMU_TEA = 0xff00000c ! TLB Exception Address Register -#endif - -#if defined(CONFIG_KGDB_NMI) -NMI_VEC = 0x1c0 ! Must catch early for debounce -#endif - -/* Offsets to the stack */ -OFF_R0 = 0 /* Return value. New ABI also arg4 */ -OFF_R1 = 4 /* New ABI: arg5 */ -OFF_R2 = 8 /* New ABI: arg6 */ -OFF_R3 = 12 /* New ABI: syscall_nr */ -OFF_R4 = 16 /* New ABI: arg0 */ -OFF_R5 = 20 /* New ABI: arg1 */ -OFF_R6 = 24 /* New ABI: arg2 */ -OFF_R7 = 28 /* New ABI: arg3 */ -OFF_SP = (15*4) -OFF_PC = (16*4) -OFF_SR = (16*4+8) -OFF_TRA = (16*4+6*4) - - -#define k0 r0 -#define k1 r1 -#define k2 r2 -#define k3 r3 -#define k4 r4 - -#define k_ex_code r2_bank /* r2_bank1 */ -#define g_imask r6 /* r6_bank1 */ -#define k_g_imask r6_bank /* r6_bank1 */ -#define current r7 /* r7_bank1 */ - -/* - * Kernel mode register usage: - * k0 scratch - * k1 scratch - * k2 scratch (Exception code) - * k3 scratch (Return address) - * k4 scratch - * k5 reserved - * k6 Global Interrupt Mask (0--15 << 4) - * k7 CURRENT_THREAD_INFO (pointer to current thread info) - */ - -! -! TLB Miss / Initial Page write exception handling -! _and_ -! TLB hits, but the access violate the protection. -! It can be valid access, such as stack grow and/or C-O-W. -! -! -! Find the pmd/pte entry and loadtlb -! If it's not found, cause address error (SEGV) -! -! Although this could be written in assembly language (and it'd be faster), -! this first version depends *much* on C implementation. -! - -#define CLI() \ - stc sr, r0; \ - or #0xf0, r0; \ - ldc r0, sr - -#define STI() \ - mov.l __INV_IMASK, r11; \ - stc sr, r10; \ - and r11, r10; \ - stc k_g_imask, r11; \ - or r11, r10; \ - ldc r10, sr - -#if defined(CONFIG_PREEMPT) -# define preempt_stop() CLI() -#else -# define preempt_stop() -# define resume_kernel restore_all -#endif - -#if defined(CONFIG_MMU) - .align 2 -ENTRY(tlb_miss_load) - bra call_dpf - mov #0, r5 - - .align 2 -ENTRY(tlb_miss_store) - bra call_dpf - mov #1, r5 - - .align 2 -ENTRY(initial_page_write) - bra call_dpf - mov #1, r5 - - .align 2 -ENTRY(tlb_protection_violation_load) - bra call_dpf - mov #0, r5 - - .align 2 -ENTRY(tlb_protection_violation_store) - bra call_dpf - mov #1, r5 - -call_dpf: - mov.l 1f, r0 - mov r5, r8 - mov.l @r0, r6 - mov r6, r9 - mov.l 2f, r0 - sts pr, r10 - jsr @r0 - mov r15, r4 - ! - tst r0, r0 - bf/s 0f - lds r10, pr - rts - nop -0: STI() - mov.l 3f, r0 - mov r9, r6 - mov r8, r5 - jmp @r0 - mov r15, r4 - - .align 2 -1: .long MMU_TEA -2: .long __do_page_fault -3: .long do_page_fault - - .align 2 -ENTRY(address_error_load) - bra call_dae - mov #0,r5 ! writeaccess = 0 - - .align 2 -ENTRY(address_error_store) - bra call_dae - mov #1,r5 ! writeaccess = 1 - - .align 2 -call_dae: - mov.l 1f, r0 - mov.l @r0, r6 ! address - mov.l 2f, r0 - jmp @r0 - mov r15, r4 ! regs - - .align 2 -1: .long MMU_TEA -2: .long do_address_error -#endif /* CONFIG_MMU */ - -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) -! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present. -! If both are configured, handle the debug traps (breakpoints) in SW, -! but still allow BIOS traps to FW. - - .align 2 -debug_kernel: -#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB) - /* Force BIOS call to FW (debug_trap put TRA in r8) */ - mov r8,r0 - shlr2 r0 - cmp/eq #0x3f,r0 - bt debug_kernel_fw -#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */ - -debug_enter: -#if defined(CONFIG_SH_KGDB) - /* Jump to kgdb, pass stacked regs as arg */ -debug_kernel_sw: - mov.l 3f, r0 - jmp @r0 - mov r15, r4 - .align 2 -3: .long kgdb_handle_exception -#endif /* CONFIG_SH_KGDB */ - -#if defined(CONFIG_SH_STANDARD_BIOS) - /* Unwind the stack and jmp to the debug entry */ -debug_kernel_fw: - mov.l @r15+, r0 - mov.l @r15+, r1 - mov.l @r15+, r2 - mov.l @r15+, r3 - mov.l @r15+, r4 - mov.l @r15+, r5 - mov.l @r15+, r6 - mov.l @r15+, r7 - stc sr, r8 - mov.l 1f, r9 ! BL =1, RB=1, IMASK=0x0F - or r9, r8 - ldc r8, sr ! here, change the register bank - mov.l @r15+, r8 - mov.l @r15+, r9 - mov.l @r15+, r10 - mov.l @r15+, r11 - mov.l @r15+, r12 - mov.l @r15+, r13 - mov.l @r15+, r14 - mov.l @r15+, k0 - ldc.l @r15+, spc - lds.l @r15+, pr - mov.l @r15+, k1 - ldc.l @r15+, gbr - lds.l @r15+, mach - lds.l @r15+, macl - mov k0, r15 - ! - mov.l 2f, k0 - mov.l @k0, k0 - jmp @k0 - ldc k1, ssr - .align 2 -1: .long 0x300000f0 -2: .long gdb_vbr_vector -#endif /* CONFIG_SH_STANDARD_BIOS */ - -#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ - - - .align 2 -debug_trap: -#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - shll r0 - shll r0 ! kernel space? - bt/s debug_kernel -#endif - mov.l @r15, r0 ! Restore R0 value - mov.l 1f, r8 - jmp @r8 - nop - - .align 2 -ENTRY(exception_error) - ! - STI() - mov.l 2f, r0 - jmp @r0 - nop - -! - .align 2 -1: .long break_point_trap_software -2: .long do_exception_error - - .align 2 -ret_from_exception: - preempt_stop() -ret_from_irq: - ! - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - shll r0 - shll r0 ! kernel space? - bt/s resume_kernel ! Yes, it's from kernel, go back soon - GET_THREAD_INFO(r8) - -#ifdef CONFIG_PREEMPT - bra resume_userspace - nop -ENTRY(resume_kernel) - mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count - tst r0, r0 - bf noresched -need_resched: - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_NEED_RESCHED, r0 ! need_resched set? - bt noresched - - mov #OFF_SR, r0 - mov.l @(r0,r15), r0 ! get status register - and #0xf0, r0 ! interrupts off (exception path)? - cmp/eq #0xf0, r0 - bt noresched - - mov.l 1f, r0 - mov.l r0, @(TI_PRE_COUNT,r8) - - STI() - mov.l 2f, r0 - jsr @r0 - nop - mov #0, r0 - mov.l r0, @(TI_PRE_COUNT,r8) - CLI() - - bra need_resched - nop -noresched: - bra restore_all - nop - - .align 2 -1: .long PREEMPT_ACTIVE -2: .long schedule -#endif - -ENTRY(resume_userspace) - ! r8: current_thread_info - CLI() - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_WORK_MASK, r0 - bt/s restore_all - tst #_TIF_NEED_RESCHED, r0 - - .align 2 -work_pending: - ! r0: current_thread_info->flags - ! r8: current_thread_info - ! t: result of "tst #_TIF_NEED_RESCHED, r0" - bf/s work_resched - tst #_TIF_SIGPENDING, r0 -work_notifysig: - bt/s restore_all - mov r15, r4 - mov #0, r5 - mov.l 2f, r1 - mova restore_all, r0 - jmp @r1 - lds r0, pr -work_resched: -#ifndef CONFIG_PREEMPT - ! gUSA handling - mov.l @(OFF_SP,r15), r0 ! get user space stack pointer - mov r0, r1 - shll r0 - bf/s 1f - shll r0 - bf/s 1f - mov #OFF_PC, r0 - ! SP >= 0xc0000000 : gUSA mark - mov.l @(r0,r15), r2 ! get user space PC (program counter) - mov.l @(OFF_R0,r15), r3 ! end point - cmp/hs r3, r2 ! r2 >= r3? - bt 1f - add r3, r1 ! rewind point #2 - mov.l r1, @(r0,r15) ! reset PC to rewind point #2 - ! -1: -#endif - mov.l 1f, r1 - jsr @r1 ! schedule - nop - CLI() - ! - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_WORK_MASK, r0 - bt restore_all - bra work_pending - tst #_TIF_NEED_RESCHED, r0 - - .align 2 -1: .long schedule -2: .long do_signal - - .align 2 -syscall_exit_work: - ! r0: current_thread_info->flags - ! r8: current_thread_info - tst #_TIF_SYSCALL_TRACE, r0 - bt/s work_pending - tst #_TIF_NEED_RESCHED, r0 - STI() - ! XXX setup arguments... - mov.l 4f, r0 ! do_syscall_trace - jsr @r0 - nop - bra resume_userspace - nop - - .align 2 -syscall_trace_entry: - ! Yes it is traced. - ! XXX setup arguments... - mov.l 4f, r11 ! Call do_syscall_trace which notifies - jsr @r11 ! superior (will chomp R[0-7]) - nop - ! Reload R0-R4 from kernel stack, where the - ! parent may have modified them using - ! ptrace(POKEUSR). (Note that R0-R2 are - ! used by the system call handler directly - ! from the kernel stack anyway, so don't need - ! to be reloaded here.) This allows the parent - ! to rewrite system calls and args on the fly. - mov.l @(OFF_R4,r15), r4 ! arg0 - mov.l @(OFF_R5,r15), r5 - mov.l @(OFF_R6,r15), r6 - mov.l @(OFF_R7,r15), r7 ! arg3 - mov.l @(OFF_R3,r15), r3 ! syscall_nr - ! Arrange for do_syscall_trace to be called - ! again as the system call returns. - mov.l 2f, r10 ! Number of syscalls - cmp/hs r10, r3 - bf syscall_call - mov #-ENOSYS, r0 - bra syscall_exit - mov.l r0, @(OFF_R0,r15) ! Return value - -/* - * Syscall interface: - * - * Syscall #: R3 - * Arguments #0 to #3: R4--R7 - * Arguments #4 to #6: R0, R1, R2 - * TRA: (number of arguments + 0x10) x 4 - * - * This code also handles delegating other traps to the BIOS/gdb stub - * according to: - * - * Trap number - * (TRA>>2) Purpose - * -------- ------- - * 0x0-0xf old syscall ABI - * 0x10-0x1f new syscall ABI - * 0x20-0xff delegated through debug_trap to BIOS/gdb stub. - * - * Note: When we're first called, the TRA value must be shifted - * right 2 bits in order to get the value that was used as the "trapa" - * argument. - */ - - .align 2 - .globl ret_from_fork -ret_from_fork: - mov.l 1f, r8 - jsr @r8 - mov r0, r4 - bra syscall_exit - nop - .align 2 -1: .long schedule_tail - ! -ENTRY(system_call) - mov.l 1f, r9 - mov.l @r9, r8 ! Read from TRA (Trap Address) Register - ! - ! Is the trap argument >= 0x20? (TRA will be >= 0x80) - mov #0x7f, r9 - cmp/hi r9, r8 - bt/s 0f - mov #OFF_TRA, r9 - add r15, r9 - ! - mov.l r8, @r9 ! set TRA value to tra - STI() - ! Call the system call handler through the table. - ! First check for bad syscall number - mov r3, r9 - mov.l 2f, r8 ! Number of syscalls - cmp/hs r8, r9 - bf/s good_system_call - GET_THREAD_INFO(r8) -syscall_badsys: ! Bad syscall number - mov #-ENOSYS, r0 - bra resume_userspace - mov.l r0, @(OFF_R0,r15) ! Return value - ! -0: - bra debug_trap - nop - ! -good_system_call: ! Good syscall number - mov.l @(TI_FLAGS,r8), r8 - mov #_TIF_SYSCALL_TRACE, r10 - tst r10, r8 - bf syscall_trace_entry - ! -syscall_call: - shll2 r9 ! x4 - mov.l 3f, r8 ! Load the address of sys_call_table - add r8, r9 - mov.l @r9, r8 - jsr @r8 ! jump to specific syscall handler - nop - mov.l r0, @(OFF_R0,r15) ! save the return value - ! -syscall_exit: - CLI() - ! - GET_THREAD_INFO(r8) - mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags - tst #_TIF_ALLWORK_MASK, r0 - bf syscall_exit_work -restore_all: - mov.l @r15+, r0 - mov.l @r15+, r1 - mov.l @r15+, r2 - mov.l @r15+, r3 - mov.l @r15+, r4 - mov.l @r15+, r5 - mov.l @r15+, r6 - mov.l @r15+, r7 - ! - stc sr, r8 - mov.l 7f, r9 - or r9, r8 ! BL =1, RB=1 - ldc r8, sr ! here, change the register bank - ! - mov.l @r15+, r8 - mov.l @r15+, r9 - mov.l @r15+, r10 - mov.l @r15+, r11 - mov.l @r15+, r12 - mov.l @r15+, r13 - mov.l @r15+, r14 - mov.l @r15+, k4 ! original stack pointer - ldc.l @r15+, spc - lds.l @r15+, pr - mov.l @r15+, k3 ! original SR - ldc.l @r15+, gbr - lds.l @r15+, mach - lds.l @r15+, macl - add #4, r15 ! Skip syscall number - ! -#ifdef CONFIG_SH_DSP - mov.l @r15+, k0 ! DSP mode marker - mov.l 5f, k1 - cmp/eq k0, k1 ! Do we have a DSP stack frame? - bf skip_restore - - stc sr, k0 ! Enable CPU DSP mode - or k1, k0 ! (within kernel it may be disabled) - ldc k0, sr - mov r2, k0 ! Backup r2 - - ! Restore DSP registers from stack - mov r15, r2 - movs.l @r2+, a1 - movs.l @r2+, a0g - movs.l @r2+, a1g - movs.l @r2+, m0 - movs.l @r2+, m1 - mov r2, r15 - - lds.l @r15+, a0 - lds.l @r15+, x0 - lds.l @r15+, x1 - lds.l @r15+, y0 - lds.l @r15+, y1 - lds.l @r15+, dsr - ldc.l @r15+, rs - ldc.l @r15+, re - ldc.l @r15+, mod - - mov k0, r2 ! Restore r2 -skip_restore: -#endif - ! - ! Calculate new SR value - mov k3, k2 ! original SR value - mov.l 9f, k1 - and k1, k2 ! Mask orignal SR value - ! - mov k3, k0 ! Calculate IMASK-bits - shlr2 k0 - and #0x3c, k0 - cmp/eq #0x3c, k0 - bt/s 6f - shll2 k0 - mov g_imask, k0 - ! -6: or k0, k2 ! Set the IMASK-bits - ldc k2, ssr - ! -#if defined(CONFIG_KGDB_NMI) - ! Clear in_nmi - mov.l 4f, k0 - mov #0, k1 - mov.b k1, @k0 -#endif - mov.l @r15+, k2 ! restore EXPEVT - mov k4, r15 - rte - nop - - .align 2 -1: .long TRA -2: .long NR_syscalls -3: .long sys_call_table -4: .long do_syscall_trace -5: .long 0x00001000 ! DSP -7: .long 0x30000000 -9: -__INV_IMASK: - .long 0xffffff0f ! ~(IMASK) - -! Exception Vector Base -! -! Should be aligned page boundary. -! - .balign 4096,0,4096 -ENTRY(vbr_base) - .long 0 -! - .balign 256,0,256 -general_exception: - mov.l 1f, k2 - mov.l 2f, k3 - bra handle_exception - mov.l @k2, k2 - .align 2 -1: .long EXPEVT -2: .long ret_from_exception -! -! - .balign 1024,0,1024 -tlb_miss: - mov.l 1f, k2 - mov.l 4f, k3 - bra handle_exception - mov.l @k2, k2 -! - .balign 512,0,512 -interrupt: - mov.l 2f, k2 - mov.l 3f, k3 -#if defined(CONFIG_KGDB_NMI) - ! Debounce (filter nested NMI) - mov.l @k2, k0 - mov.l 5f, k1 - cmp/eq k1, k0 - bf 0f - mov.l 6f, k1 - tas.b @k1 - bt 0f - rte - nop - .align 2 -5: .long NMI_VEC -6: .long in_nmi -0: -#endif /* defined(CONFIG_KGDB_NMI) */ - bra handle_exception - mov.l @k2, k2 - - .align 2 -1: .long EXPEVT -2: .long INTEVT -3: .long ret_from_irq -4: .long ret_from_exception - -! -! - .align 2 -handle_exception: - ! Using k0, k1 for scratch registers (r0_bank1, r1_bank), - ! save all registers onto stack. - ! - stc ssr, k0 ! Is it from kernel space? - shll k0 ! Check MD bit (bit30) by shifting it into... - shll k0 ! ...the T bit - bt/s 1f ! It's a kernel to kernel transition. - mov r15, k0 ! save original stack to k0 - /* User space to kernel */ - mov #0x20, k1 - shll8 k1 ! k1 := 8192 (== THREAD_SIZE) - add current, k1 - mov k1, r15 ! change to kernel stack - ! -1: mov #-1, k4 - mov.l 2f, k1 - ! -#ifdef CONFIG_SH_DSP - mov.l r2, @-r15 ! Save r2, we need another reg - stc sr, k4 - mov.l 1f, r2 - tst r2, k4 ! Check if in DSP mode - mov.l @r15+, r2 ! Restore r2 now - bt/s skip_save - mov #0, k4 ! Set marker for no stack frame - - mov r2, k4 ! Backup r2 (in k4) for later - - ! Save DSP registers on stack - stc.l mod, @-r15 - stc.l re, @-r15 - stc.l rs, @-r15 - sts.l dsr, @-r15 - sts.l y1, @-r15 - sts.l y0, @-r15 - sts.l x1, @-r15 - sts.l x0, @-r15 - sts.l a0, @-r15 - - ! GAS is broken, does not generate correct "movs.l Ds,@-As" instr. - - ! FIXME: Make sure that this is still the case with newer toolchains, - ! as we're not at all interested in supporting ancient toolchains at - ! this point. -- PFM. - - mov r15, r2 - .word 0xf653 ! movs.l a1, @-r2 - .word 0xf6f3 ! movs.l a0g, @-r2 - .word 0xf6d3 ! movs.l a1g, @-r2 - .word 0xf6c3 ! movs.l m0, @-r2 - .word 0xf6e3 ! movs.l m1, @-r2 - mov r2, r15 - - mov k4, r2 ! Restore r2 - mov.l 1f, k4 ! Force DSP stack frame -skip_save: - mov.l k4, @-r15 ! Push DSP mode marker onto stack -#endif - ! Save the user registers on the stack. - mov.l k2, @-r15 ! EXPEVT - mov.l k4, @-r15 ! set TRA (default: -1) - ! - sts.l macl, @-r15 - sts.l mach, @-r15 - stc.l gbr, @-r15 - stc.l ssr, @-r15 - sts.l pr, @-r15 - stc.l spc, @-r15 - ! - lds k3, pr ! Set the return address to pr - ! - mov.l k0, @-r15 ! save orignal stack - mov.l r14, @-r15 - mov.l r13, @-r15 - mov.l r12, @-r15 - mov.l r11, @-r15 - mov.l r10, @-r15 - mov.l r9, @-r15 - mov.l r8, @-r15 - ! - stc sr, r8 ! Back to normal register bank, and - or k1, r8 ! Block all interrupts - mov.l 3f, k1 - and k1, r8 ! ... - ldc r8, sr ! ...changed here. - ! - mov.l r7, @-r15 - mov.l r6, @-r15 - mov.l r5, @-r15 - mov.l r4, @-r15 - mov.l r3, @-r15 - mov.l r2, @-r15 - mov.l r1, @-r15 - mov.l r0, @-r15 - ! Then, dispatch to the handler, according to the exception code. - stc k_ex_code, r8 - shlr2 r8 - shlr r8 - mov.l 4f, r9 - add r8, r9 - mov.l @r9, r9 - jmp @r9 - nop - - .align 2 -1: .long 0x00001000 ! DSP=1 -2: .long 0x000080f0 ! FD=1, IMASK=15 -3: .long 0xcfffffff ! RB=0, BL=0 -4: .long exception_handling_table - - .align 2 -ENTRY(exception_none) - rts - nop - - .data -ENTRY(sys_call_table) - .long sys_ni_syscall /* 0 - old "setup()" system call*/ - .long sys_exit - .long sys_fork - .long sys_read - .long sys_write - .long sys_open /* 5 */ - .long sys_close - .long sys_waitpid - .long sys_creat - .long sys_link - .long sys_unlink /* 10 */ - .long sys_execve - .long sys_chdir - .long sys_time - .long sys_mknod - .long sys_chmod /* 15 */ - .long sys_lchown16 - .long sys_ni_syscall /* old break syscall holder */ - .long sys_stat - .long sys_lseek - .long sys_getpid /* 20 */ - .long sys_mount - .long sys_oldumount - .long sys_setuid16 - .long sys_getuid16 - .long sys_stime /* 25 */ - .long sys_ptrace - .long sys_alarm - .long sys_fstat - .long sys_pause - .long sys_utime /* 30 */ - .long sys_ni_syscall /* old stty syscall holder */ - .long sys_ni_syscall /* old gtty syscall holder */ - .long sys_access - .long sys_nice - .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ - .long sys_sync - .long sys_kill - .long sys_rename - .long sys_mkdir - .long sys_rmdir /* 40 */ - .long sys_dup - .long sys_pipe - .long sys_times - .long sys_ni_syscall /* old prof syscall holder */ - .long sys_brk /* 45 */ - .long sys_setgid16 - .long sys_getgid16 - .long sys_signal - .long sys_geteuid16 - .long sys_getegid16 /* 50 */ - .long sys_acct - .long sys_umount /* recycled never used phys() */ - .long sys_ni_syscall /* old lock syscall holder */ - .long sys_ioctl - .long sys_fcntl /* 55 */ - .long sys_ni_syscall /* old mpx syscall holder */ - .long sys_setpgid - .long sys_ni_syscall /* old ulimit syscall holder */ - .long sys_ni_syscall /* sys_olduname */ - .long sys_umask /* 60 */ - .long sys_chroot - .long sys_ustat - .long sys_dup2 - .long sys_getppid - .long sys_getpgrp /* 65 */ - .long sys_setsid - .long sys_sigaction - .long sys_sgetmask - .long sys_ssetmask - .long sys_setreuid16 /* 70 */ - .long sys_setregid16 - .long sys_sigsuspend - .long sys_sigpending - .long sys_sethostname - .long sys_setrlimit /* 75 */ - .long sys_old_getrlimit - .long sys_getrusage - .long sys_gettimeofday - .long sys_settimeofday - .long sys_getgroups16 /* 80 */ - .long sys_setgroups16 - .long sys_ni_syscall /* sys_oldselect */ - .long sys_symlink - .long sys_lstat - .long sys_readlink /* 85 */ - .long sys_uselib - .long sys_swapon - .long sys_reboot - .long old_readdir - .long old_mmap /* 90 */ - .long sys_munmap - .long sys_truncate - .long sys_ftruncate - .long sys_fchmod - .long sys_fchown16 /* 95 */ - .long sys_getpriority - .long sys_setpriority - .long sys_ni_syscall /* old profil syscall holder */ - .long sys_statfs - .long sys_fstatfs /* 100 */ - .long sys_ni_syscall /* ioperm */ - .long sys_socketcall - .long sys_syslog - .long sys_setitimer - .long sys_getitimer /* 105 */ - .long sys_newstat - .long sys_newlstat - .long sys_newfstat - .long sys_uname - .long sys_ni_syscall /* 110 */ /* iopl */ - .long sys_vhangup - .long sys_ni_syscall /* idle */ - .long sys_ni_syscall /* vm86old */ - .long sys_wait4 - .long sys_swapoff /* 115 */ - .long sys_sysinfo - .long sys_ipc - .long sys_fsync - .long sys_sigreturn - .long sys_clone /* 120 */ - .long sys_setdomainname - .long sys_newuname - .long sys_ni_syscall /* sys_modify_ldt */ - .long sys_adjtimex - .long sys_mprotect /* 125 */ - .long sys_sigprocmask - .long sys_ni_syscall /* old "create_module" */ - .long sys_init_module - .long sys_delete_module - .long sys_ni_syscall /* 130: old "get_kernel_syms" */ - .long sys_quotactl - .long sys_getpgid - .long sys_fchdir - .long sys_bdflush - .long sys_sysfs /* 135 */ - .long sys_personality - .long sys_ni_syscall /* for afs_syscall */ - .long sys_setfsuid16 - .long sys_setfsgid16 - .long sys_llseek /* 140 */ - .long sys_getdents - .long sys_select - .long sys_flock - .long sys_msync - .long sys_readv /* 145 */ - .long sys_writev - .long sys_getsid - .long sys_fdatasync - .long sys_sysctl - .long sys_mlock /* 150 */ - .long sys_munlock - .long sys_mlockall - .long sys_munlockall - .long sys_sched_setparam - .long sys_sched_getparam /* 155 */ - .long sys_sched_setscheduler - .long sys_sched_getscheduler - .long sys_sched_yield - .long sys_sched_get_priority_max - .long sys_sched_get_priority_min /* 160 */ - .long sys_sched_rr_get_interval - .long sys_nanosleep - .long sys_mremap - .long sys_setresuid16 - .long sys_getresuid16 /* 165 */ - .long sys_ni_syscall /* vm86 */ - .long sys_ni_syscall /* old "query_module" */ - .long sys_poll - .long sys_nfsservctl - .long sys_setresgid16 /* 170 */ - .long sys_getresgid16 - .long sys_prctl - .long sys_rt_sigreturn - .long sys_rt_sigaction - .long sys_rt_sigprocmask /* 175 */ - .long sys_rt_sigpending - .long sys_rt_sigtimedwait - .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend - .long sys_pread_wrapper /* 180 */ - .long sys_pwrite_wrapper - .long sys_chown16 - .long sys_getcwd - .long sys_capget - .long sys_capset /* 185 */ - .long sys_sigaltstack - .long sys_sendfile - .long sys_ni_syscall /* streams1 */ - .long sys_ni_syscall /* streams2 */ - .long sys_vfork /* 190 */ - .long sys_getrlimit - .long sys_mmap2 - .long sys_truncate64 - .long sys_ftruncate64 - .long sys_stat64 /* 195 */ - .long sys_lstat64 - .long sys_fstat64 - .long sys_lchown - .long sys_getuid - .long sys_getgid /* 200 */ - .long sys_geteuid - .long sys_getegid - .long sys_setreuid - .long sys_setregid - .long sys_getgroups /* 205 */ - .long sys_setgroups - .long sys_fchown - .long sys_setresuid - .long sys_getresuid - .long sys_setresgid /* 210 */ - .long sys_getresgid - .long sys_chown - .long sys_setuid - .long sys_setgid - .long sys_setfsuid /* 215 */ - .long sys_setfsgid - .long sys_pivot_root - .long sys_mincore - .long sys_madvise - .long sys_getdents64 /* 220 */ - .long sys_fcntl64 - .long sys_ni_syscall /* reserved for TUX */ - .long sys_ni_syscall /* Reserved for Security */ - .long sys_gettid - .long sys_readahead /* 225 */ - .long sys_setxattr - .long sys_lsetxattr - .long sys_fsetxattr - .long sys_getxattr - .long sys_lgetxattr /* 230 */ - .long sys_fgetxattr - .long sys_listxattr - .long sys_llistxattr - .long sys_flistxattr - .long sys_removexattr /* 235 */ - .long sys_lremovexattr - .long sys_fremovexattr - .long sys_tkill - .long sys_sendfile64 - .long sys_futex /* 240 */ - .long sys_sched_setaffinity - .long sys_sched_getaffinity - .long sys_ni_syscall - .long sys_ni_syscall - .long sys_io_setup /* 245 */ - .long sys_io_destroy - .long sys_io_getevents - .long sys_io_submit - .long sys_io_cancel - .long sys_fadvise64 /* 250 */ - .long sys_ni_syscall - .long sys_exit_group - .long sys_lookup_dcookie - .long sys_epoll_create - .long sys_epoll_ctl /* 255 */ - .long sys_epoll_wait - .long sys_remap_file_pages - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime /* 260 */ - .long sys_timer_gettime - .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime /* 265 */ - .long sys_clock_getres - .long sys_clock_nanosleep - .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill /* 270 */ - .long sys_utimes - .long sys_fadvise64_64_wrapper - .long sys_ni_syscall /* Reserved for vserver */ - .long sys_ni_syscall /* Reserved for mbind */ - .long sys_ni_syscall /* 275 - get_mempolicy */ - .long sys_ni_syscall /* set_mempolicy */ - .long sys_mq_open - .long sys_mq_unlink - .long sys_mq_timedsend - .long sys_mq_timedreceive /* 280 */ - .long sys_mq_notify - .long sys_mq_getsetattr - .long sys_ni_syscall /* Reserved for kexec */ - .long sys_waitid - .long sys_add_key /* 285 */ - .long sys_request_key - .long sys_keyctl - .long sys_ioprio_set - .long sys_ioprio_get - .long sys_inotify_init /* 290 */ - .long sys_inotify_add_watch - .long sys_inotify_rm_watch - -/* End of entry.S */ |