1 files changed, 0 insertions, 84 deletions
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
deleted file mode 100644
index 74defe76a05..00000000000
--- a/arch/sh/kernel/cpu/irq/intc2.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Interrupt handling for INTC2-based IRQ.
- *
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2005, 2006 Paul Mundt (lethal@linux-sh.org)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * These are the "new Hitachi style" interrupts, as present on the
- * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780.
- */
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#if defined(CONFIG_CPU_SUBTYPE_SH7760)
-#define INTC2_BASE	0xfe080000
-#define INTC2_INTMSK	(INTC2_BASE + 0x40)
-#define INTC2_INTMSKCLR	(INTC2_BASE + 0x60)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
-#define INTC2_BASE	0xffd40000
-#define INTC2_INTMSK	(INTC2_BASE + 0x38)
-#define INTC2_INTMSKCLR	(INTC2_BASE + 0x3c)
-#endif
-
-static void disable_intc2_irq(unsigned int irq)
-{
-	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC2_INTMSK + p->msk_offset);
-}
-
-static void enable_intc2_irq(unsigned int irq)
-{
-	struct intc2_data *p = get_irq_chip_data(irq);
-	ctrl_outl(1 << p->msk_shift, INTC2_INTMSKCLR + p->msk_offset);
-}
-
-static struct irq_chip intc2_irq_chip = {
-	.name		= "INTC2",
-	.mask		= disable_intc2_irq,
-	.unmask		= enable_intc2_irq,
-	.mask_ack	= disable_intc2_irq,
-};
-
-/*
- * Setup an INTC2 style interrupt.
- * NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
- * allowing the use of the numbers straight out of the datasheet.
- * For example:
- *    PIO1 which is INTPRI00[19,16] and INTMSK00[13]
- * would be:               ^     ^             ^  ^
- *                         |     |             |  |
- *     { 84,		   0,   16,            0, 13 },
- *
- * in the intc2_data table.
- */
-void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs)
-{
-	int i;
-
-	for (i = 0; i < nr_irqs; i++) {
-		unsigned long ipr, flags;
-		struct intc2_data *p = table + i;
-
-		disable_irq_nosync(p->irq);
-
-		/* Set the priority level */
-		local_irq_save(flags);
-
-		ipr = ctrl_inl(INTC2_BASE + p->ipr_offset);
-		ipr &= ~(0xf << p->ipr_shift);
-		ipr |= p->priority << p->ipr_shift;
-		ctrl_outl(ipr, INTC2_BASE + p->ipr_offset);
-
-		local_irq_restore(flags);
-
-		set_irq_chip_and_handler_name(p->irq, &intc2_irq_chip,
-					      handle_level_irq, "level");
-		set_irq_chip_data(p->irq, p);
-
-		enable_intc2_irq(p->irq);
-	}
-}