diff options
Diffstat (limited to 'arch/sh/include/mach-se')
| -rw-r--r-- | arch/sh/include/mach-se/mach/se.h | 19 | ||||
| -rw-r--r-- | arch/sh/include/mach-se/mach/se7343.h | 64 | ||||
| -rw-r--r-- | arch/sh/include/mach-se/mach/se7721.h | 6 | ||||
| -rw-r--r-- | arch/sh/include/mach-se/mach/se7722.h | 26 | ||||
| -rw-r--r-- | arch/sh/include/mach-se/mach/se7724.h | 73 | ||||
| -rw-r--r-- | arch/sh/include/mach-se/mach/se7751.h | 3 | ||||
| -rw-r--r-- | arch/sh/include/mach-se/mach/se7780.h | 7 |
7 files changed, 129 insertions, 69 deletions
diff --git a/arch/sh/include/mach-se/mach/se.h b/arch/sh/include/mach-se/mach/se.h index 14be91c5a2f..8a6d44b4987 100644 --- a/arch/sh/include/mach-se/mach/se.h +++ b/arch/sh/include/mach-se/mach/se.h @@ -8,6 +8,7 @@ * * Hitachi SolutionEngine support */ +#include <linux/sh_intc.h> /* Box specific addresses. */ @@ -82,16 +83,16 @@ #define INTC_IPRD 0xa4000018UL #define INTC_IPRE 0xa400001aUL -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 +#define IRQ0_IRQ evt2irq(0x600) +#define IRQ1_IRQ evt2irq(0x620) #endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) -#define IRQ_STNIC 12 -#define IRQ_CFCARD 14 +#define IRQ_STNIC evt2irq(0x380) +#define IRQ_CFCARD evt2irq(0x3c0) #else -#define IRQ_STNIC 10 -#define IRQ_CFCARD 7 +#define IRQ_STNIC evt2irq(0x340) +#define IRQ_CFCARD evt2irq(0x2e0) #endif /* SH Ether support (SH7710/SH7712) */ @@ -105,9 +106,9 @@ # define PHY_ID 0x01 #endif /* Ether IRQ */ -#define SH_ETH0_IRQ 80 -#define SH_ETH1_IRQ 81 -#define SH_TSU_IRQ 82 +#define SH_ETH0_IRQ evt2irq(0xc00) +#define SH_ETH1_IRQ evt2irq(0xc20) +#define SH_TSU_IRQ evt2irq(0xc40) void init_se_IRQ(void); diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h index 749914b400f..542521c970c 100644 --- a/arch/sh/include/mach-se/mach/se7343.h +++ b/arch/sh/include/mach-se/mach/se7343.h @@ -8,6 +8,7 @@ * * SH-Mobile SolutionEngine 7343 support */ +#include <linux/sh_intc.h> /* Box specific addresses. */ @@ -49,9 +50,6 @@ #define PA_LED 0xb0C00000 /* LED */ #define LED_SHIFT 0 #define PA_DIPSW 0xb0900000 /* Dip switch 31 */ -#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */ -#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */ -#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */ /* Area 5 */ #define PA_EXT5 0x14000000 #define PA_EXT5_SIZE 0x04000000 @@ -94,34 +92,34 @@ #define PORT_DRVCR 0xA4050180 -#define PORT_PADR 0xA4050120 -#define PORT_PBDR 0xA4050122 -#define PORT_PCDR 0xA4050124 -#define PORT_PDDR 0xA4050126 -#define PORT_PEDR 0xA4050128 -#define PORT_PFDR 0xA405012A -#define PORT_PGDR 0xA405012C -#define PORT_PHDR 0xA405012E -#define PORT_PJDR 0xA4050130 -#define PORT_PKDR 0xA4050132 -#define PORT_PLDR 0xA4050134 -#define PORT_PMDR 0xA4050136 -#define PORT_PNDR 0xA4050138 -#define PORT_PQDR 0xA405013A -#define PORT_PRDR 0xA405013C -#define PORT_PTDR 0xA4050160 -#define PORT_PUDR 0xA4050162 -#define PORT_PVDR 0xA4050164 -#define PORT_PWDR 0xA4050166 -#define PORT_PYDR 0xA4050168 +#define PORT_PADR 0xA4050120 +#define PORT_PBDR 0xA4050122 +#define PORT_PCDR 0xA4050124 +#define PORT_PDDR 0xA4050126 +#define PORT_PEDR 0xA4050128 +#define PORT_PFDR 0xA405012A +#define PORT_PGDR 0xA405012C +#define PORT_PHDR 0xA405012E +#define PORT_PJDR 0xA4050130 +#define PORT_PKDR 0xA4050132 +#define PORT_PLDR 0xA4050134 +#define PORT_PMDR 0xA4050136 +#define PORT_PNDR 0xA4050138 +#define PORT_PQDR 0xA405013A +#define PORT_PRDR 0xA405013C +#define PORT_PTDR 0xA4050160 +#define PORT_PUDR 0xA4050162 +#define PORT_PVDR 0xA4050164 +#define PORT_PWDR 0xA4050166 +#define PORT_PYDR 0xA4050168 #define FPGA_IN 0xb1400000 #define FPGA_OUT 0xb1400002 -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 -#define IRQ4_IRQ 36 -#define IRQ5_IRQ 37 +#define IRQ0_IRQ evt2irq(0x600) +#define IRQ1_IRQ evt2irq(0x620) +#define IRQ4_IRQ evt2irq(0x680) +#define IRQ5_IRQ evt2irq(0x6a0) #define SE7343_FPGA_IRQ_MRSHPC0 0 #define SE7343_FPGA_IRQ_MRSHPC1 1 @@ -133,18 +131,12 @@ #define SE7343_FPGA_IRQ_UARTB 11 #define SE7343_FPGA_IRQ_NR 12 -#define SE7343_FPGA_IRQ_BASE 120 -#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) -#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) -#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) -#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) -#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) -#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) -#define UARTA_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_UARTA) -#define UARTB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_UARTB) +struct irq_domain; /* arch/sh/boards/se/7343/irq.c */ +extern struct irq_domain *se7343_irq_domain; + void init_7343se_IRQ(void); #endif /* __ASM_SH_HITACHI_SE7343_H */ diff --git a/arch/sh/include/mach-se/mach/se7721.h b/arch/sh/include/mach-se/mach/se7721.h index b957f604119..eabd0538de4 100644 --- a/arch/sh/include/mach-se/mach/se7721.h +++ b/arch/sh/include/mach-se/mach/se7721.h @@ -11,6 +11,8 @@ #ifndef __ASM_SH_SE7721_H #define __ASM_SH_SE7721_H + +#include <linux/sh_intc.h> #include <asm/addrspace.h> /* Box specific addresses. */ @@ -49,9 +51,9 @@ #define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) #define PA_LED 0xB6800000 /* 8bit LED */ -#define PA_FPGA 0xB7000000 /* FPGA base address */ +#define PA_FPGA 0xB7000000 /* FPGA base address */ -#define MRSHPC_IRQ0 10 +#define MRSHPC_IRQ0 evt2irq(0x340) #define FPGA_ILSR1 (PA_FPGA + 0x02) #define FPGA_ILSR2 (PA_FPGA + 0x03) diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h index e971d9a82f4..637e7ac753f 100644 --- a/arch/sh/include/mach-se/mach/se7722.h +++ b/arch/sh/include/mach-se/mach/se7722.h @@ -13,6 +13,7 @@ * for more details. * */ +#include <linux/sh_intc.h> #include <asm/addrspace.h> /* Box specific addresses. */ @@ -31,7 +32,7 @@ #define PA_PERIPHERAL 0xB0000000 -#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */ +#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */ #define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */ #define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */ #define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */ @@ -51,7 +52,7 @@ #define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) #define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */ -#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */ +#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */ #define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ /* GPIO */ @@ -77,14 +78,8 @@ #define PORT_HIZCRC 0xA405015CUL /* IRQ */ -#define IRQ0_IRQ 32 -#define IRQ1_IRQ 33 - -#define IRQ01_MODE 0xb1800000 -#define IRQ01_STS 0xb1800004 -#define IRQ01_MASK 0xb1800008 - -/* Bits in IRQ01_* registers */ +#define IRQ0_IRQ evt2irq(0x600) +#define IRQ1_IRQ evt2irq(0x620) #define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */ #define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */ @@ -92,18 +87,13 @@ #define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */ #define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */ #define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */ - #define SE7722_FPGA_IRQ_NR 6 -#define SE7722_FPGA_IRQ_BASE 110 -#define MRSHPC_IRQ3 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3) -#define MRSHPC_IRQ2 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2) -#define MRSHPC_IRQ1 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1) -#define MRSHPC_IRQ0 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0) -#define SMC_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC) -#define USB_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB) +struct irq_domain; /* arch/sh/boards/se/7722/irq.c */ +extern struct irq_domain *se7722_irq_domain; + void init_se7722_IRQ(void); #define __IO_PREFIX se7722 diff --git a/arch/sh/include/mach-se/mach/se7724.h b/arch/sh/include/mach-se/mach/se7724.h new file mode 100644 index 00000000000..be842dd1ca0 --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7724.h @@ -0,0 +1,73 @@ +#ifndef __ASM_SH_SE7724_H +#define __ASM_SH_SE7724_H + +/* + * linux/include/asm-sh/se7724.h + * + * Copyright (C) 2009 Renesas Solutions Corp. + * + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * Hitachi UL SolutionEngine 7724 Support. + * + * Based on se7722.h + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <linux/sh_intc.h> +#include <asm/addrspace.h> + +/* SH Eth */ +#define SH_ETH_ADDR (0xA4600000) +#define SH_ETH_MAHR (SH_ETH_ADDR + 0x1C0) +#define SH_ETH_MALR (SH_ETH_ADDR + 0x1C8) + +#define PA_LED (0xba203000) /* 8bit LED */ +#define IRQ_MODE (0xba200010) +#define IRQ0_SR (0xba200014) +#define IRQ1_SR (0xba200018) +#define IRQ2_SR (0xba20001c) +#define IRQ0_MR (0xba200020) +#define IRQ1_MR (0xba200024) +#define IRQ2_MR (0xba200028) + +/* IRQ */ +#define IRQ0_IRQ evt2irq(0x600) +#define IRQ1_IRQ evt2irq(0x620) +#define IRQ2_IRQ evt2irq(0x640) + +/* Bits in IRQ012 registers */ +#define SE7724_FPGA_IRQ_BASE 220 + +/* IRQ0 */ +#define IRQ0_BASE SE7724_FPGA_IRQ_BASE +#define IRQ0_KEY (IRQ0_BASE + 12) +#define IRQ0_RMII (IRQ0_BASE + 13) +#define IRQ0_SMC (IRQ0_BASE + 14) +#define IRQ0_MASK 0x7fff +#define IRQ0_END IRQ0_SMC +/* IRQ1 */ +#define IRQ1_BASE (IRQ0_END + 1) +#define IRQ1_TS (IRQ1_BASE + 0) +#define IRQ1_MASK 0x0001 +#define IRQ1_END IRQ1_TS +/* IRQ2 */ +#define IRQ2_BASE (IRQ1_END + 1) +#define IRQ2_USB0 (IRQ1_BASE + 0) +#define IRQ2_USB1 (IRQ1_BASE + 1) +#define IRQ2_MASK 0x0003 +#define IRQ2_END IRQ2_USB1 + +#define SE7724_FPGA_IRQ_NR (IRQ2_END - IRQ0_BASE) + +/* arch/sh/boards/se/7724/irq.c */ +void init_se7724_IRQ(void); + +#define __IO_PREFIX se7724 +#include <asm/io_generic.h> + +#endif /* __ASM_SH_SE7724_H */ diff --git a/arch/sh/include/mach-se/mach/se7751.h b/arch/sh/include/mach-se/mach/se7751.h index b36792ac5d6..271871793d5 100644 --- a/arch/sh/include/mach-se/mach/se7751.h +++ b/arch/sh/include/mach-se/mach/se7751.h @@ -11,6 +11,7 @@ * Modified for 7751 Solution Engine by * Ian da Silva and Jeremy Siegel, 2001. */ +#include <linux/sh_intc.h> /* Box specific addresses. */ @@ -63,7 +64,7 @@ #define BCR_ILCRF (PA_BCR + 10) #define BCR_ILCRG (PA_BCR + 12) -#define IRQ_79C973 13 +#define IRQ_79C973 evt2irq(0x3a0) void init_7751se_IRQ(void); diff --git a/arch/sh/include/mach-se/mach/se7780.h b/arch/sh/include/mach-se/mach/se7780.h index 40e9b41458c..bde357cf81b 100644 --- a/arch/sh/include/mach-se/mach/se7780.h +++ b/arch/sh/include/mach-se/mach/se7780.h @@ -12,6 +12,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#include <linux/sh_intc.h> #include <asm/addrspace.h> /* Box specific addresses. */ @@ -80,13 +81,13 @@ #define IRQPOS_PCCPW (0 * 4) /* IDE interrupt */ -#define IRQ_IDE0 67 /* iVDR */ +#define IRQ_IDE0 evt2irq(0xa60) /* iVDR */ /* SMC interrupt */ -#define SMC_IRQ 8 +#define SMC_IRQ evt2irq(0x300) /* SM501 interrupt */ -#define SM501_IRQ 0 +#define SM501_IRQ evt2irq(0x200) /* interrupt pin */ #define IRQPIN_EXTINT1 0 /* IRQ0 pin */ |
