diff options
Diffstat (limited to 'arch/sh/boards')
83 files changed, 3339 insertions, 2266 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 938e87d5148..e331e5373b8 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -3,6 +3,9 @@ menu "Board support" config SOLUTION_ENGINE bool +config SH_ALPHA_BOARD + bool + config SH_SOLUTION_ENGINE bool "SolutionEngine" select SOLUTION_ENGINE @@ -41,6 +44,8 @@ config SH_7721_SOLUTION_ENGINE config SH_7722_SOLUTION_ENGINE bool "SolutionEngine7722" select SOLUTION_ENGINE + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN depends on CPU_SUBTYPE_SH7722 help Select 7722 SolutionEngine if configuring for a Hitachi SH772 @@ -51,6 +56,8 @@ config SH_7724_SOLUTION_ENGINE select SOLUTION_ENGINE depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select 7724 SolutionEngine if configuring for a Hitachi SH7724 evaluation board. @@ -76,18 +83,13 @@ config SH_7780_SOLUTION_ENGINE config SH_7343_SOLUTION_ENGINE bool "SolutionEngine7343" select SOLUTION_ENGINE + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN depends on CPU_SUBTYPE_SH7343 help Select 7343 SolutionEngine if configuring for a Hitachi SH7343 (SH-Mobile 3AS) evaluation board. -config SH_7751_SYSTEMH - bool "SystemH7751R" - depends on CPU_SUBTYPE_SH7751R - help - Select SystemH if you are configuring for a Renesas SystemH - 7751R evaluation board. - config SH_HP6XX bool "HP6XX" select SYS_SUPPORTS_APM_EMULATION @@ -137,7 +139,9 @@ config SH_RTS7751R2D config SH_RSK bool "Renesas Starter Kit" - depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 + depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ + CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select this option if configuring for any of the RSK+ MCU evaluation platforms. @@ -154,6 +158,10 @@ config SH_SDK7786 bool "SDK7786" depends on CPU_SUBTYPE_SH7786 select SYS_SUPPORTS_PCI + select NO_IOPORT_MAP if !PCI + select ARCH_WANT_OPTIONAL_GPIOLIB + select HAVE_SRAM_POOL + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select SDK7786 if configuring for a Renesas Technology Europe SH7786-65nm board. @@ -164,6 +172,12 @@ config SH_HIGHLANDER select SYS_SUPPORTS_PCI select IO_TRAPPED if MMU +config SH_SH7757LCR + bool "SH7757LCR" + depends on CPU_SUBTYPE_SH7757 + select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR + config SH_SH7785LCR bool "SH7785LCR" depends on CPU_SUBTYPE_SH7785 @@ -190,11 +204,13 @@ config SH_URQUELL depends on CPU_SUBTYPE_SH7786 select ARCH_REQUIRE_GPIOLIB select SYS_SUPPORTS_PCI + select NO_IOPORT_MAP if !PCI config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. @@ -203,6 +219,7 @@ config SH_AP325RXA bool "AP-325RXA" depends on CPU_SUBTYPE_SH7723 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" @@ -211,6 +228,7 @@ config SH_KFR2R09 bool "KFR2R09" depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help "Kit For R2R for 2009" support. @@ -218,6 +236,8 @@ config SH_ECOVEC bool "EcoVec" depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB + select SND_SOC_DA7210 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "R0P7724LC0011/21RL (EcoVec)" support. @@ -286,11 +306,14 @@ config SH_LBOX_RE2 config SH_X3PROTO bool "SH-X3 Prototype board" depends on CPU_SUBTYPE_SHX3 + select NO_IOPORT_MAP if !PCI + select IRQ_DOMAIN config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" depends on CPU_SUBTYPE_SH7720 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Magic Panel R2 if configuring for Magic Panel R2. @@ -298,15 +321,44 @@ config SH_CAYMAN bool "Hitachi Cayman" depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 select SYS_SUPPORTS_PCI + select ARCH_MIGHT_HAVE_PC_SERIO config SH_POLARIS bool "SMSC Polaris" select CPU_HAS_IPR_IRQ + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7709 help Select if configuring for an SMSC Polaris development board -endmenu +config SH_SH2007 + bool "SH-2007 board" + select NO_IOPORT_MAP + select REGULATOR_FIXED_VOLTAGE if REGULATOR + depends on CPU_SUBTYPE_SH7780 + help + SH-2007 is a single-board computer based around SH7780 chip + intended for embedded applications. + It has an Ethernet interface (SMC9118), direct connected + Compact Flash socket, two serial ports and PC-104 bus. + More information at <http://sh2000.sh-linux.org>. + +config SH_APSH4A3A + bool "AP-SH4A-3A" + select SH_ALPHA_BOARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR + depends on CPU_SUBTYPE_SH7785 + help + Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. + +config SH_APSH4AD0A + bool "AP-SH4AD-0A" + select SH_ALPHA_BOARD + select SYS_SUPPORTS_PCI + select REGULATOR_FIXED_VOLTAGE if REGULATOR + depends on CPU_SUBTYPE_SH7786 + help + Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. source "arch/sh/boards/mach-r2d/Kconfig" source "arch/sh/boards/mach-highlander/Kconfig" @@ -327,3 +379,5 @@ config SH_MAGIC_PANEL_R2_VERSION endmenu endif + +endmenu diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index 4f90f9b7a92..975a0f64ff2 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -2,10 +2,16 @@ # Specific board support, not covered by a mach group. # obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o +obj-$(CONFIG_SH_SECUREEDGE5410) += board-secureedge5410.o +obj-$(CONFIG_SH_SH2007) += board-sh2007.o obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o obj-$(CONFIG_SH_URQUELL) += board-urquell.o obj-$(CONFIG_SH_SHMIN) += board-shmin.o +obj-$(CONFIG_SH_EDOSK7705) += board-edosk7705.o obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o obj-$(CONFIG_SH_ESPT) += board-espt.o obj-$(CONFIG_SH_POLARIS) += board-polaris.o obj-$(CONFIG_SH_TITAN) += board-titan.o +obj-$(CONFIG_SH_SH7757LCR) += board-sh7757lcr.o +obj-$(CONFIG_SH_APSH4A3A) += board-apsh4a3a.o +obj-$(CONFIG_SH_APSH4AD0A) += board-apsh4ad0a.o diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c new file mode 100644 index 00000000000..0a39c241628 --- /dev/null +++ b/arch/sh/boards/board-apsh4a3a.c @@ -0,0 +1,185 @@ +/* + * ALPHAPROJECT AP-SH4A-3A Support. + * + * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd. + * Copyright (C) 2008 Yoshihiro Shimoda + * Copyright (C) 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/mtd/physmap.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> +#include <linux/smsc911x.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <asm/machvec.h> +#include <asm/sizes.h> +#include <asm/clock.h> + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 4, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = 0x01000000 - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .name = "smsc911x-memory", + .start = 0xA4000000, + .end = 0xA4000000 + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "smsc911x-irq", + .start = evt2irq(0x200), + .end = evt2irq(0x200), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_16BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct platform_device *apsh4a3a_devices[] __initdata = { + &nor_flash_device, + &smsc911x_device, +}; + +static int __init apsh4a3a_devices_setup(void) +{ + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + return platform_add_devices(apsh4a3a_devices, + ARRAY_SIZE(apsh4a3a_devices)); +} +device_initcall(apsh4a3a_devices_setup); + +static int apsh4a3a_clk_init(void) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, "extal"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + ret = clk_set_rate(clk, 33333000); + clk_put(clk); + + return ret; +} + +/* Initialize the board */ +static void __init apsh4a3a_setup(char **cmdline_p) +{ + printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n"); +} + +static void __init apsh4a3a_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ7654); +} + +/* Return the board specific boot mode pin configuration */ +static int apsh4a3a_mode_pins(void) +{ + int value = 0; + + /* These are the factory default settings of SW1 and SW2. + * If you change these dip switches then you will need to + * adjust the values below as well. + */ + value &= ~MODE_PIN0; /* Clock Mode 16 */ + value &= ~MODE_PIN1; + value &= ~MODE_PIN2; + value &= ~MODE_PIN3; + value |= MODE_PIN4; + value &= ~MODE_PIN5; /* 16-bit Area0 bus width */ + value |= MODE_PIN6; /* Area 0 SRAM interface */ + value |= MODE_PIN7; + value |= MODE_PIN8; /* Little Endian */ + value |= MODE_PIN9; /* Master Mode */ + value |= MODE_PIN10; /* Crystal resonator */ + value |= MODE_PIN11; /* Display Unit */ + value |= MODE_PIN12; + value &= ~MODE_PIN13; /* 29-bit address mode */ + value |= MODE_PIN14; /* No PLL step-up */ + + return value; +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_apsh4a3a __initmv = { + .mv_name = "AP-SH4A-3A", + .mv_setup = apsh4a3a_setup, + .mv_clk_init = apsh4a3a_clk_init, + .mv_init_irq = apsh4a3a_init_irq, + .mv_mode_pins = apsh4a3a_mode_pins, +}; diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c new file mode 100644 index 00000000000..92eac3a9918 --- /dev/null +++ b/arch/sh/boards/board-apsh4ad0a.c @@ -0,0 +1,135 @@ +/* + * ALPHAPROJECT AP-SH4AD-0A Support. + * + * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd. + * Copyright (C) 2010 Matt Fleming + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> +#include <linux/smsc911x.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <asm/machvec.h> +#include <asm/sizes.h> + +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .name = "smsc911x-memory", + .start = 0xA4000000, + .end = 0xA4000000 + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "smsc911x-irq", + .start = evt2irq(0x200), + .end = evt2irq(0x200), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_16BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct platform_device *apsh4ad0a_devices[] __initdata = { + &smsc911x_device, +}; + +static int __init apsh4ad0a_devices_setup(void) +{ + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + return platform_add_devices(apsh4ad0a_devices, + ARRAY_SIZE(apsh4ad0a_devices)); +} +device_initcall(apsh4ad0a_devices_setup); + +static int apsh4ad0a_mode_pins(void) +{ + int value = 0; + + /* These are the factory default settings of SW1 and SW2. + * If you change these dip switches then you will need to + * adjust the values below as well. + */ + value |= MODE_PIN0; /* Clock Mode 3 */ + value |= MODE_PIN1; + value &= ~MODE_PIN2; + value &= ~MODE_PIN3; + value &= ~MODE_PIN4; /* 16-bit Area0 bus width */ + value |= MODE_PIN5; + value |= MODE_PIN6; + value |= MODE_PIN7; /* Normal mode */ + value |= MODE_PIN8; /* Little Endian */ + value |= MODE_PIN9; /* Crystal resonator */ + value &= ~MODE_PIN10; /* 29-bit address mode */ + value &= ~MODE_PIN11; /* PCI-E Root port */ + value &= ~MODE_PIN12; /* 4 lane + 1 lane */ + value |= MODE_PIN13; /* AUD Enable */ + value &= ~MODE_PIN14; /* Normal Operation */ + + return value; +} + +static int apsh4ad0a_clk_init(void) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, "extal"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + ret = clk_set_rate(clk, 33333000); + clk_put(clk); + + return ret; +} + +/* Initialize the board */ +static void __init apsh4ad0a_setup(char **cmdline_p) +{ + pr_info("Alpha Project AP-SH4AD-0A support:\n"); +} + +static void __init apsh4ad0a_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ3210); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_apsh4ad0a __initmv = { + .mv_name = "AP-SH4AD-0A", + .mv_setup = apsh4ad0a_setup, + .mv_mode_pins = apsh4ad0a_mode_pins, + .mv_clk_init = apsh4ad0a_clk_init, + .mv_init_irq = apsh4ad0a_init_irq, +}; diff --git a/arch/sh/boards/board-edosk7705.c b/arch/sh/boards/board-edosk7705.c new file mode 100644 index 00000000000..5e24c17bbda --- /dev/null +++ b/arch/sh/boards/board-edosk7705.c @@ -0,0 +1,78 @@ +/* + * arch/sh/boards/renesas/edosk7705/setup.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for edosk7705 development + * board by S. Dunn, 2003. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/smc91x.h> +#include <linux/sh_intc.h> +#include <asm/machvec.h> +#include <asm/sizes.h> + +#define SMC_IOBASE 0xA2000000 +#define SMC_IO_OFFSET 0x300 +#define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET) + +#define ETHERNET_IRQ evt2irq(0x320) + +static void __init sh_edosk7705_init_irq(void) +{ + make_imask_irq(ETHERNET_IRQ); +} + +/* eth initialization functions */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL, +}; + +static struct resource smc91x_res[] = { + [0] = { + .start = SMC_IOADDR, + .end = SMC_IOADDR + SZ_32 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ETHERNET_IRQ, + .end = ETHERNET_IRQ, + .flags = IORESOURCE_IRQ , + } +}; + +static struct platform_device smc91x_dev = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_res), + .resource = smc91x_res, + + .dev = { + .platform_data = &smc91x_info, + }, +}; + +/* platform init code */ +static struct platform_device *edosk7705_devices[] __initdata = { + &smc91x_dev, +}; + +static int __init init_edosk7705_devices(void) +{ + return platform_add_devices(edosk7705_devices, + ARRAY_SIZE(edosk7705_devices)); +} +device_initcall(init_edosk7705_devices); + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_edosk7705 __initmv = { + .mv_name = "EDOSK7705", + .mv_init_irq = sh_edosk7705_init_irq, +}; diff --git a/arch/sh/boards/board-edosk7760.c b/arch/sh/boards/board-edosk7760.c index 35dc0994875..bab5b951390 100644 --- a/arch/sh/boards/board-edosk7760.c +++ b/arch/sh/boards/board-edosk7760.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/smc91x.h> #include <linux/interrupt.h> +#include <linux/sh_intc.h> #include <linux/i2c.h> #include <linux/mtd/physmap.h> #include <asm/machvec.h> @@ -40,8 +41,6 @@ #define SMC_IO_OFFSET 0x300 #define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET) -#define ETHERNET_IRQ 5 - /* NOR flash */ static struct mtd_partition edosk7760_nor_flash_partitions[] = { { @@ -56,7 +55,7 @@ static struct mtd_partition edosk7760_nor_flash_partitions[] = { }, { .name = "fs", .offset = MTDPART_OFS_APPEND, - .size = SZ_26M, + .size = (26 << 20), }, { .name = "other", .offset = MTDPART_OFS_APPEND, @@ -99,8 +98,8 @@ static struct resource sh7760_i2c1_res[] = { .end = SH7760_I2C1_MMIOEND, .flags = IORESOURCE_MEM, },{ - .start = SH7760_I2C1_IRQ, - .end = SH7760_I2C1_IRQ, + .start = evt2irq(0x9e0), + .end = evt2irq(0x9e0), .flags = IORESOURCE_IRQ, }, }; @@ -122,8 +121,8 @@ static struct resource sh7760_i2c0_res[] = { .end = SH7760_I2C0_MMIOEND, .flags = IORESOURCE_MEM, }, { - .start = SH7760_I2C0_IRQ, - .end = SH7760_I2C0_IRQ, + .start = evt2irq(0x9c0), + .end = evt2irq(0x9c0), .flags = IORESOURCE_IRQ, }, }; @@ -150,8 +149,8 @@ static struct resource smc91x_res[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = ETHERNET_IRQ, - .end = ETHERNET_IRQ, + .start = evt2irq(0x2a0), + .end = evt2irq(0x2a0), .flags = IORESOURCE_IRQ , } }; @@ -182,12 +181,11 @@ static int __init init_edosk7760_devices(void) return platform_add_devices(edosk7760_devices, ARRAY_SIZE(edosk7760_devices)); } -__initcall(init_edosk7760_devices); +device_initcall(init_edosk7760_devices); /* * The Machine Vector */ struct sh_machine_vector mv_edosk7760 __initmv = { .mv_name = "EDOSK7760", - .mv_nr_irqs = 128, }; diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c index d5ce5e18eb3..7291e2f11a4 100644 --- a/arch/sh/boards/board-espt.c +++ b/arch/sh/boards/board-espt.c @@ -1,5 +1,5 @@ /* - * Data Technology Inc. ESPT-GIGA board suport + * Data Technology Inc. ESPT-GIGA board support * * Copyright (C) 2008, 2009 Renesas Solutions Corp. * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> @@ -13,9 +13,10 @@ #include <linux/interrupt.h> #include <linux/mtd/physmap.h> #include <linux/io.h> +#include <linux/sh_eth.h> +#include <linux/sh_intc.h> #include <asm/machvec.h> #include <asm/sizes.h> -#include <asm/sh_eth.h> /* NOR Flash */ static struct mtd_partition espt_nor_flash_partitions[] = { @@ -66,7 +67,12 @@ static struct resource sh_eth_resources[] = { .end = 0xFEE00F7C - 1, .flags = IORESOURCE_MEM, }, { - .start = 57, /* irq number */ + .start = 0xFEE01800, /* TSU */ + .end = 0xFEE01FFF, + .flags = IORESOURCE_MEM, + }, { + + .start = evt2irq(0x920), /* irq number */ .flags = IORESOURCE_IRQ, }, }; @@ -74,10 +80,11 @@ static struct resource sh_eth_resources[] = { static struct sh_eth_plat_data sh7763_eth_pdata = { .phy = 0, .edmac_endian = EDMAC_LITTLE_ENDIAN, + .phy_interface = PHY_INTERFACE_MODE_MII, }; static struct platform_device espt_eth_device = { - .name = "sh-eth", + .name = "sh7763-gether", .resource = sh_eth_resources, .num_resources = ARRAY_SIZE(sh_eth_resources), .dev = { diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index efba450a051..20500858b56 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -14,19 +14,25 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/map.h> +#include <linux/sh_intc.h> #include <mach/magicpanelr2.h> #include <asm/heartbeat.h> #include <cpu/sh7720.h> -#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; -/* Prefer cmdline over RedBoot */ -static const char *probes[] = { "cmdlinepart", "RedBoot", NULL }; +#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) /* Wait until reset finished. Timeout is 100ms. */ static int __init ethernet_reset_finished(void) @@ -248,8 +254,8 @@ static struct resource smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 35, - .end = 35, + .start = evt2irq(0x660), + .end = evt2irq(0x660), .flags = IORESOURCE_IRQ, }, }; @@ -293,8 +299,6 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; -static struct mtd_partition *parsed_partitions; - static struct mtd_partition mpr2_partitions[] = { /* Reserved for bootloader, read-only */ { @@ -318,6 +322,8 @@ static struct mtd_partition mpr2_partitions[] = { }; static struct physmap_flash_data flash_data = { + .parts = mpr2_partitions, + .nr_parts = ARRAY_SIZE(mpr2_partitions), .width = 2, }; @@ -337,32 +343,6 @@ static struct platform_device flash_device = { }, }; -static struct mtd_info *flash_mtd; - -static struct map_info mpr2_flash_map = { - .name = "Magic Panel R2 Flash", - .size = 0x2000000UL, - .bankwidth = 2, -}; - -static void __init set_mtd_partitions(void) -{ - int nr_parts = 0; - - simple_map_init(&mpr2_flash_map); - flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map); - nr_parts = parse_mtd_partitions(flash_mtd, probes, - &parsed_partitions, 0); - /* If there is no partition table, used the hard coded table */ - if (nr_parts <= 0) { - flash_data.parts = mpr2_partitions; - flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions); - } else { - flash_data.nr_parts = nr_parts; - flash_data.parts = parsed_partitions; - } -} - /* * Add all resources to the platform_device */ @@ -376,7 +356,8 @@ static struct platform_device *mpr2_devices[] __initdata = { static int __init mpr2_devices_setup(void) { - set_mtd_partitions(); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); } device_initcall(mpr2_devices_setup); @@ -388,17 +369,17 @@ static void __init init_mpr2_IRQ(void) { plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */ - set_irq_type(32, IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */ - set_irq_type(33, IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */ - set_irq_type(34, IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */ - set_irq_type(35, IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */ - set_irq_type(36, IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */ - set_irq_type(37, IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */ - - intc_set_priority(32, 13); /* IRQ0 CAN1 */ - intc_set_priority(33, 13); /* IRQ0 CAN2 */ - intc_set_priority(34, 13); /* IRQ0 CAN3 */ - intc_set_priority(35, 6); /* IRQ3 SMSC9115 */ + irq_set_irq_type(evt2irq(0x600), IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */ + irq_set_irq_type(evt2irq(0x620), IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */ + irq_set_irq_type(evt2irq(0x640), IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */ + irq_set_irq_type(evt2irq(0x660), IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */ + irq_set_irq_type(evt2irq(0x680), IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */ + irq_set_irq_type(evt2irq(0x6a0), IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */ + + intc_set_priority(evt2irq(0x600), 13); /* IRQ0 CAN1 */ + intc_set_priority(evt2irq(0x620), 13); /* IRQ0 CAN2 */ + intc_set_priority(evt2irq(0x640), 13); /* IRQ0 CAN3 */ + intc_set_priority(evt2irq(0x660), 6); /* IRQ3 SMSC9115 */ } /* diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c index 594866356c2..37a08d09472 100644 --- a/arch/sh/boards/board-polaris.c +++ b/arch/sh/boards/board-polaris.c @@ -1,5 +1,5 @@ /* - * June 2006 steve.glendinning@smsc.com + * June 2006 Steve Glendinning <steve.glendinning@shawell.net> * * Polaris-specific resource declaration * @@ -9,6 +9,8 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/io.h> #include <asm/irq.h> @@ -22,6 +24,12 @@ #define AREA5_WAIT_CTRL (0x1C00) #define WAIT_STATES_10 (0x7) +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -88,6 +96,8 @@ static int __init polaris_initialise(void) printk(KERN_INFO "Configuring Polaris external bus\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* Configure area 5 with 2 wait states */ wcr = __raw_readw(WCR2); wcr &= (~AREA5_WAIT_CTRL); @@ -141,6 +151,5 @@ static void __init init_polaris_irq(void) static struct sh_machine_vector mv_polaris __initmv = { .mv_name = "Polaris", - .mv_nr_irqs = 61, .mv_init_irq = init_polaris_irq, }; diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/board-secureedge5410.c index 331745dee37..98b36205aa7 100644 --- a/arch/sh/boards/mach-snapgear/setup.c +++ b/arch/sh/boards/board-secureedge5410.c @@ -1,6 +1,4 @@ /* - * linux/arch/sh/boards/snapgear/setup.c - * * Copyright (C) 2002 David McCullough <davidm@snapgear.com> * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org> * @@ -19,19 +17,18 @@ #include <linux/module.h> #include <linux/sched.h> #include <asm/machvec.h> -#include <mach/snapgear.h> +#include <mach/secureedge5410.h> #include <asm/irq.h> #include <asm/io.h> #include <cpu/timer.h> +unsigned short secureedge5410_ioport; + /* * EraseConfig handling functions */ - static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { - (void)__raw_readb(0xb8000000); /* dummy read */ - printk("SnapGear: erase switch interrupt!\n"); return IRQ_HANDLED; @@ -39,21 +36,21 @@ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) static int __init eraseconfig_init(void) { + unsigned int irq = evt2irq(0x240); + printk("SnapGear: EraseConfig init\n"); + /* Setup "EraseConfig" switch on external IRQ 0 */ - if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED, - "Erase Config", NULL)) + if (request_irq(irq, eraseconfig_interrupt, 0, "Erase Config", NULL)) printk("SnapGear: failed to register IRQ%d for Reset witch\n", - IRL0_IRQ); + irq); else printk("SnapGear: registered EraseConfig switch on IRQ%d\n", - IRL0_IRQ); - return(0); + irq); + return 0; } - module_init(eraseconfig_init); -/****************************************************************************/ /* * Initialize IRQ setting * @@ -62,7 +59,6 @@ module_init(eraseconfig_init); * IRL2 = eth1 * IRL3 = crypto */ - static void __init init_snapgear_IRQ(void) { printk("Setup SnapGear IRQ/IPR ...\n"); @@ -75,21 +71,5 @@ static void __init init_snapgear_IRQ(void) */ static struct sh_machine_vector mv_snapgear __initmv = { .mv_name = "SnapGear SecureEdge5410", - .mv_nr_irqs = 72, - - .mv_inb = snapgear_inb, - .mv_inw = snapgear_inw, - .mv_inl = snapgear_inl, - .mv_outb = snapgear_outb, - .mv_outw = snapgear_outw, - .mv_outl = snapgear_outl, - - .mv_inb_p = snapgear_inb_p, - .mv_inw_p = snapgear_inw, - .mv_inl_p = snapgear_inl, - .mv_outb_p = snapgear_outb_p, - .mv_outw_p = snapgear_outw, - .mv_outl_p = snapgear_outl, - .mv_init_irq = init_snapgear_IRQ, }; diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c new file mode 100644 index 00000000000..1980bb7e578 --- /dev/null +++ b/arch/sh/boards/board-sh2007.c @@ -0,0 +1,145 @@ +/* + * SH-2007 board support. + * + * Copyright (C) 2003, 2004 SUGIOKA Toshinobu + * Copyright (C) 2010 Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> +#include <linux/smsc911x.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> +#include <linux/io.h> +#include <asm/machvec.h> +#include <mach/sh2007.h> + +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + +struct smsc911x_platform_config smc911x_info = { + .flags = SMSC911X_USE_32BIT, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, +}; + +static struct resource smsc9118_0_resources[] = { + [0] = { + .start = SMC0_BASE, + .end = SMC0_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x240), + .end = evt2irq(0x240), + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource smsc9118_1_resources[] = { + [0] = { + .start = SMC1_BASE, + .end = SMC1_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x280), + .end = evt2irq(0x280), + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smsc9118_0_device = { + .name = "smsc911x", + .id = 0, + .num_resources = ARRAY_SIZE(smsc9118_0_resources), + .resource = smsc9118_0_resources, + .dev = { + .platform_data = &smc911x_info, + }, +}; + +static struct platform_device smsc9118_1_device = { + .name = "smsc911x", + .id = 1, + .num_resources = ARRAY_SIZE(smsc9118_1_resources), + .resource = smsc9118_1_resources, + .dev = { + .platform_data = &smc911x_info, + }, +}; + +static struct resource cf_resources[] = { + [0] = { + .start = CF_BASE + CF_OFFSET, + .end = CF_BASE + CF_OFFSET + 0x0f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CF_BASE + CF_OFFSET + 0x206, + .end = CF_BASE + CF_OFFSET + 0x20f, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = evt2irq(0x2c0), + .end = evt2irq(0x2c0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device cf_device = { + .name = "pata_platform", + .id = 0, + .num_resources = ARRAY_SIZE(cf_resources), + .resource = cf_resources, +}; + +static struct platform_device *sh2007_devices[] __initdata = { + &smsc9118_0_device, + &smsc9118_1_device, + &cf_device, +}; + +static int __init sh2007_io_init(void) +{ + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices)); + return 0; +} +subsys_initcall(sh2007_io_init); + +static void __init sh2007_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ); +} + +/* + * Initialize the board + */ +static void __init sh2007_setup(char **cmdline_p) +{ + printk(KERN_INFO "SH-2007 Setup..."); + + /* setup wait control registers for area 5 */ + __raw_writel(CS5BCR_D, CS5BCR); + __raw_writel(CS5WCR_D, CS5WCR); + __raw_writel(CS5PCR_D, CS5PCR); + + printk(KERN_INFO " done.\n"); +} + +/* + * The Machine Vector + */ +struct sh_machine_vector mv_sh2007 __initmv = { + .mv_setup = sh2007_setup, + .mv_name = "sh2007", + .mv_init_irq = sh2007_init_irq, +}; diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c new file mode 100644 index 00000000000..669df51a82e --- /dev/null +++ b/arch/sh/boards/board-sh7757lcr.c @@ -0,0 +1,611 @@ +/* + * Renesas R0P7757LC0012RL Support. + * + * Copyright (C) 2009 - 2010 Renesas Solutions Corp. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/io.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> +#include <linux/mmc/sh_mobile_sdhi.h> +#include <linux/sh_eth.h> +#include <linux/sh_intc.h> +#include <linux/usb/renesas_usbhs.h> +#include <cpu/sh7757.h> +#include <asm/heartbeat.h> + +static struct resource heartbeat_resource = { + .start = 0xffec005c, /* PUDR */ + .end = 0xffec005c, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, +}; + +static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 }; + +static struct heartbeat_data heartbeat_data = { + .bit_pos = heartbeat_bit_pos, + .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), + .flags = HEARTBEAT_INVERTED, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = 1, + .resource = &heartbeat_resource, +}; + +/* Fast Ethernet */ +#define GBECONT 0xffc10100 +#define GBECONT_RMII1 BIT(17) +#define GBECONT_RMII0 BIT(16) +static void sh7757_eth_set_mdio_gate(void *addr) +{ + if (((unsigned long)addr & 0x00000fff) < 0x0800) + writel(readl(GBECONT) | GBECONT_RMII0, GBECONT); + else + writel(readl(GBECONT) | GBECONT_RMII1, GBECONT); +} + +static struct resource sh_eth0_resources[] = { + { + .start = 0xfef00000, + .end = 0xfef001ff, + .flags = IORESOURCE_MEM, + }, { + .start = evt2irq(0xc80), + .end = evt2irq(0xc80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_eth_plat_data sh7757_eth0_pdata = { + .phy = 1, + .edmac_endian = EDMAC_LITTLE_ENDIAN, + .set_mdio_gate = sh7757_eth_set_mdio_gate, +}; + +static struct platform_device sh7757_eth0_device = { + .name = "sh7757-ether", + .resource = sh_eth0_resources, + .id = 0, + .num_resources = ARRAY_SIZE(sh_eth0_resources), + .dev = { + .platform_data = &sh7757_eth0_pdata, + }, +}; + +static struct resource sh_eth1_resources[] = { + { + .start = 0xfef00800, + .end = 0xfef009ff, + .flags = IORESOURCE_MEM, + }, { + .start = evt2irq(0xc80), + .end = evt2irq(0xc80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_eth_plat_data sh7757_eth1_pdata = { + .phy = 1, + .edmac_endian = EDMAC_LITTLE_ENDIAN, + .set_mdio_gate = sh7757_eth_set_mdio_gate, +}; + +static struct platform_device sh7757_eth1_device = { + .name = "sh7757-ether", + .resource = sh_eth1_resources, + .id = 1, + .num_resources = ARRAY_SIZE(sh_eth1_resources), + .dev = { + .platform_data = &sh7757_eth1_pdata, + }, +}; + +static void sh7757_eth_giga_set_mdio_gate(void *addr) +{ + if (((unsigned long)addr & 0x00000fff) < 0x0800) { + gpio_set_value(GPIO_PTT4, 1); + writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT); + } else { + gpio_set_value(GPIO_PTT4, 0); + writel(readl(GBECONT) & ~GBECONT_RMII1, GBECONT); + } +} + +static struct resource sh_eth_giga0_resources[] = { + { + .start = 0xfee00000, + .end = 0xfee007ff, + .flags = IORESOURCE_MEM, + }, { + /* TSU */ + .start = 0xfee01800, + .end = 0xfee01fff, + .flags = IORESOURCE_MEM, + }, { + .start = evt2irq(0x2960), + .end = evt2irq(0x2960), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_eth_plat_data sh7757_eth_giga0_pdata = { + .phy = 18, + .edmac_endian = EDMAC_LITTLE_ENDIAN, + .set_mdio_gate = sh7757_eth_giga_set_mdio_gate, + .phy_interface = PHY_INTERFACE_MODE_RGMII_ID, +}; + +static struct platform_device sh7757_eth_giga0_device = { + .name = "sh7757-gether", + .resource = sh_eth_giga0_resources, + .id = 2, + .num_resources = ARRAY_SIZE(sh_eth_giga0_resources), + .dev = { + .platform_data = &sh7757_eth_giga0_pdata, + }, +}; + +static struct resource sh_eth_giga1_resources[] = { + { + .start = 0xfee00800, + .end = 0xfee00fff, + .flags = IORESOURCE_MEM, + }, { + /* TSU */ + .start = 0xfee01800, + .end = 0xfee01fff, + .flags = IORESOURCE_MEM, + }, { + .start = evt2irq(0x2980), + .end = evt2irq(0x2980), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_eth_plat_data sh7757_eth_giga1_pdata = { + .phy = 19, + .edmac_endian = EDMAC_LITTLE_ENDIAN, + .set_mdio_gate = sh7757_eth_giga_set_mdio_gate, + .phy_interface = PHY_INTERFACE_MODE_RGMII_ID, +}; + +static struct platform_device sh7757_eth_giga1_device = { + .name = "sh7757-gether", + .resource = sh_eth_giga1_resources, + .id = 3, + .num_resources = ARRAY_SIZE(sh_eth_giga1_resources), + .dev = { + .platform_data = &sh7757_eth_giga1_pdata, + }, +}; + +/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + +/* SH_MMCIF */ +static struct resource sh_mmcif_resources[] = { + [0] = { + .start = 0xffcb0000, + .end = 0xffcb00ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1c60), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = evt2irq(0x1c80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_mmcif_plat_data sh_mmcif_plat = { + .sup_pclk = 0x0f, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | + MMC_CAP_NONREMOVABLE, + .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, +}; + +static struct platform_device sh_mmcif_device = { + .name = "sh_mmcif", + .id = 0, + .dev = { + .platform_data = &sh_mmcif_plat, + }, + .num_resources = ARRAY_SIZE(sh_mmcif_resources), + .resource = sh_mmcif_resources, +}; + +/* SDHI0 */ +static struct sh_mobile_sdhi_info sdhi_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI_RX, + .tmio_caps = MMC_CAP_SD_HIGHSPEED, +}; + +static struct resource sdhi_resources[] = { + [0] = { + .start = 0xffe50000, + .end = 0xffe500ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x480), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi_resources), + .resource = sdhi_resources, + .id = 0, + .dev = { + .platform_data = &sdhi_info, + }, +}; + +static int usbhs0_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +static struct renesas_usbhs_platform_info usb0_data = { + .platform_callback = { + .get_id = usbhs0_get_id, + }, + .driver_param = { + .buswait_bwait = 5, + } +}; + +static struct resource usb0_resources[] = { + [0] = { + .start = 0xfe450000, + .end = 0xfe4501ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x840), + .end = evt2irq(0x840), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb0_device = { + .name = "renesas_usbhs", + .id = 0, + .dev = { + .platform_data = &usb0_data, + }, + .num_resources = ARRAY_SIZE(usb0_resources), + .resource = usb0_resources, +}; + +static struct platform_device *sh7757lcr_devices[] __initdata = { + &heartbeat_device, + &sh7757_eth0_device, + &sh7757_eth1_device, + &sh7757_eth_giga0_device, + &sh7757_eth_giga1_device, + &sh_mmcif_device, + &sdhi_device, + &usb0_device, +}; + +static struct flash_platform_data spi_flash_data = { + .name = "m25p80", + .type = "m25px64", +}; + +static struct spi_board_info spi_board_info[] = { + { + .modalias = "m25p80", + .max_speed_hz = 25000000, + .bus_num = 0, + .chip_select = 1, + .platform_data = &spi_flash_data, + }, +}; + +static int __init sh7757lcr_devices_setup(void) +{ + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + + /* RGMII (PTA) */ + gpio_request(GPIO_FN_ET0_MDC, NULL); + gpio_request(GPIO_FN_ET0_MDIO, NULL); + gpio_request(GPIO_FN_ET1_MDC, NULL); + gpio_request(GPIO_FN_ET1_MDIO, NULL); + + /* ONFI (PTB, PTZ) */ + gpio_request(GPIO_FN_ON_NRE, NULL); + gpio_request(GPIO_FN_ON_NWE, NULL); + gpio_request(GPIO_FN_ON_NWP, NULL); + gpio_request(GPIO_FN_ON_NCE0, NULL); + gpio_request(GPIO_FN_ON_R_B0, NULL); + gpio_request(GPIO_FN_ON_ALE, NULL); + gpio_request(GPIO_FN_ON_CLE, NULL); + + gpio_request(GPIO_FN_ON_DQ7, NULL); + gpio_request(GPIO_FN_ON_DQ6, NULL); + gpio_request(GPIO_FN_ON_DQ5, NULL); + gpio_request(GPIO_FN_ON_DQ4, NULL); + gpio_request(GPIO_FN_ON_DQ3, NULL); + gpio_request(GPIO_FN_ON_DQ2, NULL); + gpio_request(GPIO_FN_ON_DQ1, NULL); + gpio_request(GPIO_FN_ON_DQ0, NULL); + + /* IRQ8 to 0 (PTB, PTC) */ + gpio_request(GPIO_FN_IRQ8, NULL); + gpio_request(GPIO_FN_IRQ7, NULL); + gpio_request(GPIO_FN_IRQ6, NULL); + gpio_request(GPIO_FN_IRQ5, NULL); + gpio_request(GPIO_FN_IRQ4, NULL); + gpio_request(GPIO_FN_IRQ3, NULL); + gpio_request(GPIO_FN_IRQ2, NULL); + gpio_request(GPIO_FN_IRQ1, NULL); + gpio_request(GPIO_FN_IRQ0, NULL); + + /* SPI0 (PTD) */ + gpio_request(GPIO_FN_SP0_MOSI, NULL); + gpio_request(GPIO_FN_SP0_MISO, NULL); + gpio_request(GPIO_FN_SP0_SCK, NULL); + gpio_request(GPIO_FN_SP0_SCK_FB, NULL); + gpio_request(GPIO_FN_SP0_SS0, NULL); + gpio_request(GPIO_FN_SP0_SS1, NULL); + gpio_request(GPIO_FN_SP0_SS2, NULL); + gpio_request(GPIO_FN_SP0_SS3, NULL); + + /* RMII 0/1 (PTE, PTF) */ + gpio_request(GPIO_FN_RMII0_CRS_DV, NULL); + gpio_request(GPIO_FN_RMII0_TXD1, NULL); + gpio_request(GPIO_FN_RMII0_TXD0, NULL); + gpio_request(GPIO_FN_RMII0_TXEN, NULL); + gpio_request(GPIO_FN_RMII0_REFCLK, NULL); + gpio_request(GPIO_FN_RMII0_RXD1, NULL); + gpio_request(GPIO_FN_RMII0_RXD0, NULL); + gpio_request(GPIO_FN_RMII0_RX_ER, NULL); + gpio_request(GPIO_FN_RMII1_CRS_DV, NULL); + gpio_request(GPIO_FN_RMII1_TXD1, NULL); + gpio_request(GPIO_FN_RMII1_TXD0, NULL); + gpio_request(GPIO_FN_RMII1_TXEN, NULL); + gpio_request(GPIO_FN_RMII1_REFCLK, NULL); + gpio_request(GPIO_FN_RMII1_RXD1, NULL); + gpio_request(GPIO_FN_RMII1_RXD0, NULL); + gpio_request(GPIO_FN_RMII1_RX_ER, NULL); + + /* eMMC (PTG) */ + gpio_request(GPIO_FN_MMCCLK, NULL); + gpio_request(GPIO_FN_MMCCMD, NULL); + gpio_request(GPIO_FN_MMCDAT7, NULL); + gpio_request(GPIO_FN_MMCDAT6, NULL); + gpio_request(GPIO_FN_MMCDAT5, NULL); + gpio_request(GPIO_FN_MMCDAT4, NULL); + gpio_request(GPIO_FN_MMCDAT3, NULL); + gpio_request(GPIO_FN_MMCDAT2, NULL); + gpio_request(GPIO_FN_MMCDAT1, NULL); + gpio_request(GPIO_FN_MMCDAT0, NULL); + + /* LPC (PTG, PTH, PTQ, PTU) */ + gpio_request(GPIO_FN_SERIRQ, NULL); + gpio_request(GPIO_FN_LPCPD, NULL); + gpio_request(GPIO_FN_LDRQ, NULL); + gpio_request(GPIO_FN_WP, NULL); + gpio_request(GPIO_FN_FMS0, NULL); + gpio_request(GPIO_FN_LAD3, NULL); + gpio_request(GPIO_FN_LAD2, NULL); + gpio_request(GPIO_FN_LAD1, NULL); + gpio_request(GPIO_FN_LAD0, NULL); + gpio_request(GPIO_FN_LFRAME, NULL); + gpio_request(GPIO_FN_LRESET, NULL); + gpio_request(GPIO_FN_LCLK, NULL); + gpio_request(GPIO_FN_LGPIO7, NULL); + gpio_request(GPIO_FN_LGPIO6, NULL); + gpio_request(GPIO_FN_LGPIO5, NULL); + gpio_request(GPIO_FN_LGPIO4, NULL); + + /* SPI1 (PTH) */ + gpio_request(GPIO_FN_SP1_MOSI, NULL); + gpio_request(GPIO_FN_SP1_MISO, NULL); + gpio_request(GPIO_FN_SP1_SCK, NULL); + gpio_request(GPIO_FN_SP1_SCK_FB, NULL); + gpio_request(GPIO_FN_SP1_SS0, NULL); + gpio_request(GPIO_FN_SP1_SS1, NULL); + + /* SDHI (PTI) */ + gpio_request(GPIO_FN_SD_WP, NULL); + gpio_request(GPIO_FN_SD_CD, NULL); + gpio_request(GPIO_FN_SD_CLK, NULL); + gpio_request(GPIO_FN_SD_CMD, NULL); + gpio_request(GPIO_FN_SD_D3, NULL); + gpio_request(GPIO_FN_SD_D2, NULL); + gpio_request(GPIO_FN_SD_D1, NULL); + gpio_request(GPIO_FN_SD_D0, NULL); + + /* SCIF3/4 (PTJ, PTW) */ + gpio_request(GPIO_FN_RTS3, NULL); + gpio_request(GPIO_FN_CTS3, NULL); + gpio_request(GPIO_FN_TXD3, NULL); + gpio_request(GPIO_FN_RXD3, NULL); + gpio_request(GPIO_FN_RTS4, NULL); + gpio_request(GPIO_FN_RXD4, NULL); + gpio_request(GPIO_FN_TXD4, NULL); + gpio_request(GPIO_FN_CTS4, NULL); + + /* SERMUX (PTK, PTL, PTO, PTV) */ + gpio_request(GPIO_FN_COM2_TXD, NULL); + gpio_request(GPIO_FN_COM2_RXD, NULL); + gpio_request(GPIO_FN_COM2_RTS, NULL); + gpio_request(GPIO_FN_COM2_CTS, NULL); + gpio_request(GPIO_FN_COM2_DTR, NULL); + gpio_request(GPIO_FN_COM2_DSR, NULL); + gpio_request(GPIO_FN_COM2_DCD, NULL); + gpio_request(GPIO_FN_COM2_RI, NULL); + gpio_request(GPIO_FN_RAC_RXD, NULL); + gpio_request(GPIO_FN_RAC_RTS, NULL); + gpio_request(GPIO_FN_RAC_CTS, NULL); + gpio_request(GPIO_FN_RAC_DTR, NULL); + gpio_request(GPIO_FN_RAC_DSR, NULL); + gpio_request(GPIO_FN_RAC_DCD, NULL); + gpio_request(GPIO_FN_RAC_TXD, NULL); + gpio_request(GPIO_FN_COM1_TXD, NULL); + gpio_request(GPIO_FN_COM1_RXD, NULL); + gpio_request(GPIO_FN_COM1_RTS, NULL); + gpio_request(GPIO_FN_COM1_CTS, NULL); + + writeb(0x10, 0xfe470000); /* SMR0: SerMux mode 0 */ + + /* IIC (PTM, PTR, PTS) */ + gpio_request(GPIO_FN_SDA7, NULL); + gpio_request(GPIO_FN_SCL7, NULL); + gpio_request(GPIO_FN_SDA6, NULL); + gpio_request(GPIO_FN_SCL6, NULL); + gpio_request(GPIO_FN_SDA5, NULL); + gpio_request(GPIO_FN_SCL5, NULL); + gpio_request(GPIO_FN_SDA4, NULL); + gpio_request(GPIO_FN_SCL4, NULL); + gpio_request(GPIO_FN_SDA3, NULL); + gpio_request(GPIO_FN_SCL3, NULL); + gpio_request(GPIO_FN_SDA2, NULL); + gpio_request(GPIO_FN_SCL2, NULL); + gpio_request(GPIO_FN_SDA1, NULL); + gpio_request(GPIO_FN_SCL1, NULL); + gpio_request(GPIO_FN_SDA0, NULL); + gpio_request(GPIO_FN_SCL0, NULL); + + /* USB (PTN) */ + gpio_request(GPIO_FN_VBUS_EN, NULL); + gpio_request(GPIO_FN_VBUS_OC, NULL); + + /* SGPIO1/0 (PTN, PTO) */ + gpio_request(GPIO_FN_SGPIO1_CLK, NULL); + gpio_request(GPIO_FN_SGPIO1_LOAD, NULL); + gpio_request(GPIO_FN_SGPIO1_DI, NULL); + gpio_request(GPIO_FN_SGPIO1_DO, NULL); + gpio_request(GPIO_FN_SGPIO0_CLK, NULL); + gpio_request(GPIO_FN_SGPIO0_LOAD, NULL); + gpio_request(GPIO_FN_SGPIO0_DI, NULL); + gpio_request(GPIO_FN_SGPIO0_DO, NULL); + + /* WDT (PTN) */ + gpio_request(GPIO_FN_SUB_CLKIN, NULL); + + /* System (PTT) */ + gpio_request(GPIO_FN_STATUS1, NULL); + gpio_request(GPIO_FN_STATUS0, NULL); + + /* PWMX (PTT) */ + gpio_request(GPIO_FN_PWMX1, NULL); + gpio_request(GPIO_FN_PWMX0, NULL); + + /* R-SPI (PTV) */ + gpio_request(GPIO_FN_R_SPI_MOSI, NULL); + gpio_request(GPIO_FN_R_SPI_MISO, NULL); + gpio_request(GPIO_FN_R_SPI_RSPCK, NULL); + gpio_request(GPIO_FN_R_SPI_SSL0, NULL); + gpio_request(GPIO_FN_R_SPI_SSL1, NULL); + + /* EVC (PTV, PTW) */ + gpio_request(GPIO_FN_EVENT7, NULL); + gpio_request(GPIO_FN_EVENT6, NULL); + gpio_request(GPIO_FN_EVENT5, NULL); + gpio_request(GPIO_FN_EVENT4, NULL); + gpio_request(GPIO_FN_EVENT3, NULL); + gpio_request(GPIO_FN_EVENT2, NULL); + gpio_request(GPIO_FN_EVENT1, NULL); + gpio_request(GPIO_FN_EVENT0, NULL); + + /* LED for heartbeat */ + gpio_request(GPIO_PTU3, NULL); + gpio_direction_output(GPIO_PTU3, 1); + gpio_request(GPIO_PTU2, NULL); + gpio_direction_output(GPIO_PTU2, 1); + gpio_request(GPIO_PTU1, NULL); + gpio_direction_output(GPIO_PTU1, 1); + gpio_request(GPIO_PTU0, NULL); + gpio_direction_output(GPIO_PTU0, 1); + + /* control for MDIO of Gigabit Ethernet */ + gpio_request(GPIO_PTT4, NULL); + gpio_direction_output(GPIO_PTT4, 1); + + /* control for eMMC */ + gpio_request(GPIO_PTT7, NULL); /* eMMC_RST# */ + gpio_direction_output(GPIO_PTT7, 0); + gpio_request(GPIO_PTT6, NULL); /* eMMC_INDEX# */ + gpio_direction_output(GPIO_PTT6, 0); + gpio_request(GPIO_PTT5, NULL); /* eMMC_PRST# */ + gpio_direction_output(GPIO_PTT5, 1); + + /* register SPI device information */ + spi_register_board_info(spi_board_info, + ARRAY_SIZE(spi_board_info)); + + /* General platform */ + return platform_add_devices(sh7757lcr_devices, + ARRAY_SIZE(sh7757lcr_devices)); +} +arch_initcall(sh7757lcr_devices_setup); + +/* Initialize IRQ setting */ +void __init init_sh7757lcr_IRQ(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ7654); + plat_irq_setup_pins(IRQ_MODE_IRQ3210); +} + +/* Initialize the board */ +static void __init sh7757lcr_setup(char **cmdline_p) +{ + printk(KERN_INFO "Renesas R0P7757LC0012RL support.\n"); +} + +static int sh7757lcr_mode_pins(void) +{ + int value = 0; + + /* These are the factory default settings of S3 (Low active). + * If you change these dip switches then you will need to + * adjust the values below as well. + */ + value |= MODE_PIN0; /* Clock Mode: 1 */ + + return value; +} + +/* The Machine Vector */ +static struct sh_machine_vector mv_sh7757lcr __initmv = { + .mv_name = "SH7757LCR", + .mv_setup = sh7757lcr_setup, + .mv_init_irq = init_sh7757lcr_IRQ, + .mv_mode_pins = sh7757lcr_mode_pins, +}; + diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c index fe7e686c94a..2c4771ee84c 100644 --- a/arch/sh/boards/board-sh7785lcr.c +++ b/arch/sh/boards/board-sh7785lcr.c @@ -20,6 +20,7 @@ #include <linux/i2c-pca-platform.h> #include <linux/i2c-algo-pca.h> #include <linux/usb/r8a66597.h> +#include <linux/sh_intc.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/clk.h> @@ -28,6 +29,7 @@ #include <cpu/sh7785.h> #include <asm/heartbeat.h> #include <asm/clock.h> +#include <asm/bl_bit.h> /* * NOTE: This board has 2 physical memory maps. @@ -104,8 +106,8 @@ static struct resource r8a66597_usb_host_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 2, - .end = 2, + .start = evt2irq(0x240), + .end = evt2irq(0x240), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -134,7 +136,7 @@ static struct resource sm501_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = 10, + .start = evt2irq(0x340), .flags = IORESOURCE_IRQ, }, }; @@ -222,8 +224,8 @@ static struct resource i2c_proto_resources[] = { .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, }, [1] = { - .start = 12, - .end = 12, + .start = evt2irq(0x380), + .end = evt2irq(0x380), .flags = IORESOURCE_IRQ, }, }; @@ -235,8 +237,8 @@ static struct resource i2c_resources[] = { .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, }, [1] = { - .start = 12, - .end = 12, + .start = evt2irq(0x380), + .end = evt2irq(0x380), .flags = IORESOURCE_IRQ, }, }; @@ -284,7 +286,7 @@ static int __init sh7785lcr_devices_setup(void) return platform_add_devices(sh7785lcr_devices, ARRAY_SIZE(sh7785lcr_devices)); } -__initcall(sh7785lcr_devices_setup); +device_initcall(sh7785lcr_devices_setup); /* Initialize IRQ setting */ void __init init_sh7785lcr_IRQ(void) @@ -299,7 +301,7 @@ static int sh7785lcr_clk_init(void) int ret; clk = clk_get(NULL, "extal"); - if (!clk || IS_ERR(clk)) + if (IS_ERR(clk)) return PTR_ERR(clk); ret = clk_set_rate(clk, 33333333); clk_put(clk); diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c index a9bd6e3ee10..b52abcc5259 100644 --- a/arch/sh/boards/board-urquell.c +++ b/arch/sh/boards/board-urquell.c @@ -20,10 +20,12 @@ #include <linux/gpio.h> #include <linux/irq.h> #include <linux/clk.h> +#include <linux/sh_intc.h> #include <mach/urquell.h> #include <cpu/sh7786.h> #include <asm/heartbeat.h> #include <asm/sizes.h> +#include <asm/smp-ops.h> /* * bit 1234 5678 @@ -77,7 +79,7 @@ static struct resource smc91x_eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 11, + .start = evt2irq(0x360), .flags = IORESOURCE_IRQ, }, }; @@ -189,7 +191,7 @@ static int urquell_clk_init(void) return -EINVAL; clk = clk_get(NULL, "extal"); - if (!clk || IS_ERR(clk)) + if (IS_ERR(clk)) return PTR_ERR(clk); ret = clk_set_rate(clk, 33333333); clk_put(clk); @@ -203,6 +205,8 @@ static void __init urquell_setup(char **cmdline_p) printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n"); pm_power_off = urquell_power_off; + + register_smp_ops(&shx3_smp_ops); } /* diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 57e37e28420..5620e33c18a 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -14,12 +14,18 @@ #include <linux/device.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> #include <linux/mtd/sh_flctl.h> #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/gpio.h> +#include <linux/videodev2.h> +#include <linux/sh_intc.h> #include <media/ov772x.h> #include <media/soc_camera.h> #include <media/soc_camera_platform.h> @@ -30,6 +36,12 @@ #include <asm/suspend.h> #include <cpu/sh7723.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct smsc911x_platform_config smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, @@ -44,8 +56,8 @@ static struct resource smsc9118_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 35, - .end = 35, + .start = evt2irq(0x660), + .end = evt2irq(0x660), .flags = IORESOURCE_IRQ, } }; @@ -154,55 +166,68 @@ static struct platform_device nand_flash_device = { #define PORT_DRVCRA 0xA405018A #define PORT_DRVCRB 0xA405018C -static void ap320_wvga_power_on(void *board_data) +static int ap320_wvga_set_brightness(int brightness) +{ + if (brightness) { + gpio_set_value(GPIO_PTS3, 0); + __raw_writew(0x100, FPGA_BKLREG); + } else { + __raw_writew(0, FPGA_BKLREG); + gpio_set_value(GPIO_PTS3, 1); + } + + return 0; +} + +static void ap320_wvga_power_on(void) { msleep(100); /* ASD AP-320/325 LCD ON */ __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG); - - /* backlight */ - gpio_set_value(GPIO_PTS3, 0); - __raw_writew(0x100, FPGA_BKLREG); } -static void ap320_wvga_power_off(void *board_data) +static void ap320_wvga_power_off(void) { - /* backlight */ - __raw_writew(0, FPGA_BKLREG); - gpio_set_value(GPIO_PTS3, 1); - /* ASD AP-320/325 LCD OFF */ __raw_writew(0, FPGA_LCDREG); } +static const struct fb_videomode ap325rxa_lcdc_modes[] = { + { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 32, + .right_margin = 160, + .hsync_len = 8, + .upper_margin = 63, + .lower_margin = 80, + .vsync_len = 1, + .sync = 0, /* hsync and vsync are active low */ + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB18, .clock_divider = 1, - .lcd_cfg = { - .name = "LB070WV1", - .xres = 800, - .yres = 480, - .left_margin = 32, - .right_margin = 160, - .hsync_len = 8, - .upper_margin = 63, - .lower_margin = 80, - .vsync_len = 1, - .sync = 0, /* hsync and vsync are active low */ - }, - .lcd_size_cfg = { /* 7.0 inch */ - .width = 152, + .lcd_modes = ap325rxa_lcdc_modes, + .num_modes = ARRAY_SIZE(ap325rxa_lcdc_modes), + .panel_cfg = { + .width = 152, /* 7.0 inch */ .height = 91, - }, - .board_cfg = { .display_on = ap320_wvga_power_on, .display_off = ap320_wvga_power_off, }, + .bl_info = { + .name = "sh_mobile_lcdc_bl", + .max_brightness = 1, + .set_brightness = ap320_wvga_set_brightness, + }, } }; @@ -214,7 +239,7 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 28, + .start = evt2irq(0x580), .flags = IORESOURCE_IRQ, }, }; @@ -226,9 +251,6 @@ static struct platform_device lcdc_device = { .dev = { .platform_data = &lcdc_info, }, - .archdata = { - .hwblk_id = HWBLK_LCDC, - }, }; static void camera_power(int val) @@ -309,26 +331,27 @@ static int camera_set_capture(struct soc_camera_platform_info *info, return ret; } -static int ap325rxa_camera_add(struct soc_camera_link *icl, struct device *dev); -static void ap325rxa_camera_del(struct soc_camera_link *icl); +static int ap325rxa_camera_add(struct soc_camera_device *icd); +static void ap325rxa_camera_del(struct soc_camera_device *icd); static struct soc_camera_platform_info camera_info = { .format_name = "UYVY", .format_depth = 16, .format = { - .code = V4L2_MBUS_FMT_YUYV8_2X8_BE, + .code = V4L2_MBUS_FMT_UYVY8_2X8, .colorspace = V4L2_COLORSPACE_SMPTE170M, .field = V4L2_FIELD_NONE, .width = 640, .height = 480, }, - .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | - SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 | - SOCAM_DATA_ACTIVE_HIGH, + .mbus_param = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER | + V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH | + V4L2_MBUS_DATA_ACTIVE_HIGH, + .mbus_type = V4L2_MBUS_PARALLEL, .set_capture = camera_set_capture, }; -struct soc_camera_link camera_link = { +static struct soc_camera_link camera_link = { .bus_id = 0, .add_device = ap325rxa_camera_add, .del_device = ap325rxa_camera_del, @@ -336,37 +359,30 @@ struct soc_camera_link camera_link = { .priv = &camera_info, }; -static void dummy_release(struct device *dev) +static struct platform_device *camera_device; + +static void ap325rxa_camera_release(struct device *dev) { + soc_camera_platform_release(&camera_device); } -static struct platform_device camera_device = { - .name = "soc_camera_platform", - .dev = { - .platform_data = &camera_info, - .release = dummy_release, - }, -}; - -static int ap325rxa_camera_add(struct soc_camera_link *icl, - struct device *dev) +static int ap325rxa_camera_add(struct soc_camera_device *icd) { - if (icl != &camera_link || camera_probe() <= 0) - return -ENODEV; + int ret = soc_camera_platform_add(icd, &camera_device, &camera_link, + ap325rxa_camera_release, 0); + if (ret < 0) + return ret; - camera_info.dev = dev; + ret = camera_probe(); + if (ret < 0) + soc_camera_platform_del(icd, camera_device, &camera_link); - return platform_device_register(&camera_device); + return ret; } -static void ap325rxa_camera_del(struct soc_camera_link *icl) +static void ap325rxa_camera_del(struct soc_camera_device *icd) { - if (icl != &camera_link) - return; - - platform_device_unregister(&camera_device); - memset(&camera_device.dev.kobj, 0, - sizeof(camera_device.dev.kobj)); + soc_camera_platform_del(icd, camera_device, &camera_link); } #endif /* CONFIG_I2C */ @@ -391,7 +407,7 @@ static struct resource ceu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, + .start = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -407,31 +423,41 @@ static struct platform_device ceu_device = { .dev = { .platform_data = &sh_mobile_ceu_info, }, - .archdata = { - .hwblk_id = HWBLK_CEU, - }, +}; + +/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), }; static struct resource sdhi0_cn3_resources[] = { [0] = { .name = "SDHI0", .start = 0x04ce0000, - .end = 0x04ce01ff, + .end = 0x04ce00ff, .flags = IORESOURCE_MEM, }, [1] = { - .start = 100, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; +static struct sh_mobile_sdhi_info sdhi0_cn3_data = { + .tmio_caps = MMC_CAP_SDIO_IRQ, +}; + static struct platform_device sdhi0_cn3_device = { .name = "sh_mobile_sdhi", .id = 0, /* "sdhi0" clock */ .num_resources = ARRAY_SIZE(sdhi0_cn3_resources), .resource = sdhi0_cn3_resources, - .archdata = { - .hwblk_id = HWBLK_SDHI0, + .dev = { + .platform_data = &sdhi0_cn3_data, }, }; @@ -439,22 +465,26 @@ static struct resource sdhi1_cn7_resources[] = { [0] = { .name = "SDHI1", .start = 0x04cf0000, - .end = 0x04cf01ff, + .end = 0x04cf00ff, .flags = IORESOURCE_MEM, }, [1] = { - .start = 23, + .start = evt2irq(0x4e0), .flags = IORESOURCE_IRQ, }, }; +static struct sh_mobile_sdhi_info sdhi1_cn7_data = { + .tmio_caps = MMC_CAP_SDIO_IRQ, +}; + static struct platform_device sdhi1_cn7_device = { .name = "sh_mobile_sdhi", .id = 1, /* "sdhi1" clock */ .num_resources = ARRAY_SIZE(sdhi1_cn7_resources), .resource = sdhi1_cn7_resources, - .archdata = { - .hwblk_id = HWBLK_SDHI1, + .dev = { + .platform_data = &sdhi1_cn7_data, }, }; @@ -471,8 +501,7 @@ static struct i2c_board_info ap325rxa_i2c_camera[] = { }; static struct ov772x_camera_info ov7725_info = { - .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP | \ - OV772X_FLAG_8BIT, + .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP, .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0), }; @@ -481,7 +510,6 @@ static struct soc_camera_link ov7725_link = { .power = ov7725_power, .board_info = &ap325rxa_i2c_camera[0], .i2c_adapter_id = 0, - .module_name = "ov772x", .priv = &ov7725_info, }; @@ -527,6 +555,10 @@ static int __init ap325rxa_devices_setup(void) &ap325rxa_sdram_leave_start, &ap325rxa_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* LD3 and LD4 LEDs */ gpio_request(GPIO_PTX5, NULL); /* RUN */ gpio_direction_output(GPIO_PTX5, 1); diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c index 1394b078db3..724e8b7271f 100644 --- a/arch/sh/boards/mach-cayman/irq.c +++ b/arch/sh/boards/mach-cayman/irq.c @@ -46,17 +46,16 @@ static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id) static struct irqaction cayman_action_smsc = { .name = "Cayman SMSC Mux", .handler = cayman_interrupt_smsc, - .flags = IRQF_DISABLED, }; static struct irqaction cayman_action_pci2 = { .name = "Cayman PCI2 Mux", .handler = cayman_interrupt_pci2, - .flags = IRQF_DISABLED, }; -static void enable_cayman_irq(unsigned int irq) +static void enable_cayman_irq(struct irq_data *data) { + unsigned int irq = data->irq; unsigned long flags; unsigned long mask; unsigned int reg; @@ -72,8 +71,9 @@ static void enable_cayman_irq(unsigned int irq) local_irq_restore(flags); } -void disable_cayman_irq(unsigned int irq) +static void disable_cayman_irq(struct irq_data *data) { + unsigned int irq = data->irq; unsigned long flags; unsigned long mask; unsigned int reg; @@ -89,16 +89,10 @@ void disable_cayman_irq(unsigned int irq) local_irq_restore(flags); } -static void ack_cayman_irq(unsigned int irq) -{ - disable_cayman_irq(irq); -} - struct irq_chip cayman_irq_type = { .name = "Cayman-IRQ", - .unmask = enable_cayman_irq, - .mask = disable_cayman_irq, - .mask_ack = ack_cayman_irq, + .irq_unmask = enable_cayman_irq, + .irq_mask = disable_cayman_irq, }; int cayman_irq_demux(int evt) @@ -153,8 +147,8 @@ void init_cayman_irq(void) } for (i = 0; i < NR_EXT_IRQS; i++) { - set_irq_chip_and_handler(START_EXT_IRQS + i, &cayman_irq_type, - handle_level_irq); + irq_set_chip_and_handler(START_EXT_IRQS + i, + &cayman_irq_type, handle_level_irq); } /* Setup the SMSC interrupt */ diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c index 7e8216ac31b..340fd40b381 100644 --- a/arch/sh/boards/mach-cayman/setup.c +++ b/arch/sh/boards/mach-cayman/setup.c @@ -165,7 +165,7 @@ static int __init smsc_superio_setup(void) return 0; } -__initcall(smsc_superio_setup); +device_initcall(smsc_superio_setup); static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len) { @@ -181,7 +181,6 @@ extern void init_cayman_irq(void); static struct sh_machine_vector mv_cayman __initmv = { .mv_name = "Hitachi Cayman", - .mv_nr_irqs = 64, .mv_ioport_map = cayman_ioport_map, .mv_init_irq = init_cayman_irq, }; diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c index d932667410a..2789647abeb 100644 --- a/arch/sh/boards/mach-dreamcast/irq.c +++ b/arch/sh/boards/mach-dreamcast/irq.c @@ -8,10 +8,11 @@ * This file is part of the LinuxDC project (www.linuxdc.org) * Released under the terms of the GNU GPL v2.0 */ - #include <linux/irq.h> #include <linux/io.h> -#include <asm/irq.h> +#include <linux/irq.h> +#include <linux/export.h> +#include <linux/err.h> #include <mach/sysasic.h> /* @@ -51,7 +52,7 @@ */ #define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32) -/* Return the hardware event's bit positon within the EMR/ESR */ +/* Return the hardware event's bit position within the EMR/ESR */ #define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31) /* @@ -60,8 +61,9 @@ */ /* Disable the hardware event by masking its bit in its EMR */ -static inline void disable_systemasic_irq(unsigned int irq) +static inline void disable_systemasic_irq(struct irq_data *data) { + unsigned int irq = data->irq; __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); __u32 mask; @@ -71,8 +73,9 @@ static inline void disable_systemasic_irq(unsigned int irq) } /* Enable the hardware event by setting its bit in its EMR */ -static inline void enable_systemasic_irq(unsigned int irq) +static inline void enable_systemasic_irq(struct irq_data *data) { + unsigned int irq = data->irq; __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2); __u32 mask; @@ -82,18 +85,19 @@ static inline void enable_systemasic_irq(unsigned int irq) } /* Acknowledge a hardware event by writing its bit back to its ESR */ -static void mask_ack_systemasic_irq(unsigned int irq) +static void mask_ack_systemasic_irq(struct irq_data *data) { + unsigned int irq = data->irq; __u32 esr = ESR_BASE + (LEVEL(irq) << 2); - disable_systemasic_irq(irq); + disable_systemasic_irq(data); outl((1 << EVENT_BIT(irq)), esr); } struct irq_chip systemasic_int = { .name = "System ASIC", - .mask = disable_systemasic_irq, - .mask_ack = mask_ack_systemasic_irq, - .unmask = enable_systemasic_irq, + .irq_mask = disable_systemasic_irq, + .irq_mask_ack = mask_ack_systemasic_irq, + .irq_unmask = enable_systemasic_irq, }; /* @@ -138,27 +142,15 @@ int systemasic_irq_demux(int irq) void systemasic_irq_init(void) { - int i, nid = cpu_to_node(boot_cpu_data); - - /* Assign all virtual IRQs to the System ASIC int. handler */ - for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) { - unsigned int irq; - - irq = create_irq_nr(i, nid); - if (unlikely(irq == 0)) { - pr_err("%s: failed hooking irq %d for systemasic\n", - __func__, i); - return; - } - - if (unlikely(irq != i)) { - pr_err("%s: got irq %d but wanted %d, bailing.\n", - __func__, irq, i); - destroy_irq(irq); - return; - } + int irq_base, i; - set_irq_chip_and_handler(i, &systemasic_int, - handle_level_irq); + irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE, + HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1); + if (IS_ERR_VALUE(irq_base)) { + pr_err("%s: failed hooking irqs\n", __func__); + return; } + + for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) + irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq); } diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 39ed8722d11..85d5255d259 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -11,28 +11,38 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> +#include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> +#include <linux/mfd/tmio.h> #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> +#include <linux/usb/renesas_usbhs.h> #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/spi/spi.h> #include <linux/spi/sh_msiof.h> #include <linux/spi/mmc_spi.h> -#include <linux/mmc/host.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> -#include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/platform_data/gpio_backlight.h> +#include <linux/sh_eth.h> +#include <linux/sh_intc.h> +#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <sound/sh_fsi.h> +#include <sound/simple_card.h> #include <media/sh_mobile_ceu.h> +#include <media/soc_camera.h> #include <media/tw9910.h> #include <media/mt9t112.h> #include <asm/heartbeat.h> -#include <asm/sh_eth.h> #include <asm/clock.h> #include <asm/suspend.h> #include <cpu/sh7724.h> @@ -62,6 +72,16 @@ * OFF-ON : MMC */ +/* + * FSI - DA7210 + * + * it needs amixer settings for playing + * + * amixer set 'HeadPhone' 80 + * amixer set 'Out Mixer Left DAC Left' on + * amixer set 'Out Mixer Right DAC Right' on + */ + /* Heartbeat */ static unsigned char led_pos[] = { 0, 1, 2, 3 }; @@ -133,32 +153,30 @@ static struct resource sh_eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 91, + .start = evt2irq(0xd60), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; -struct sh_eth_plat_data sh_eth_plat = { +static struct sh_eth_plat_data sh_eth_plat = { .phy = 0x1f, /* SMSC LAN8700 */ .edmac_endian = EDMAC_LITTLE_ENDIAN, + .phy_interface = PHY_INTERFACE_MODE_MII, .ether_link_active_low = 1 }; static struct platform_device sh_eth_device = { - .name = "sh-eth", - .id = 0, + .name = "sh7724-ether", + .id = 0, .dev = { .platform_data = &sh_eth_plat, }, .num_resources = ARRAY_SIZE(sh_eth_resources), .resource = sh_eth_resources, - .archdata = { - .hwblk_id = HWBLK_ETHER, - }, }; /* USB0 host */ -void usb0_port_power(int port, int power) +static void usb0_port_power(int port, int power) { gpio_set_value(GPIO_PTB4, power); } @@ -175,8 +193,8 @@ static struct resource usb0_host_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, - .end = 65, + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -194,7 +212,7 @@ static struct platform_device usb0_host_device = { }; /* USB1 host/function */ -void usb1_port_power(int port, int power) +static void usb1_port_power(int port, int power) { gpio_set_value(GPIO_PTB5, power); } @@ -211,8 +229,8 @@ static struct resource usb1_common_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 66, - .end = 66, + .start = evt2irq(0xa40), + .end = evt2irq(0xa40), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -229,21 +247,103 @@ static struct platform_device usb1_common_device = { .resource = usb1_common_resources, }; -/* LCDC */ +/* + * USBHS + */ +static int usbhs_get_id(struct platform_device *pdev) +{ + return gpio_get_value(GPIO_PTB3); +} + +static int usbhs_phy_reset(struct platform_device *pdev) +{ + /* enable vbus if HOST */ + if (!gpio_get_value(GPIO_PTB3)) + gpio_set_value(GPIO_PTB5, 1); + + return 0; +} + +static struct renesas_usbhs_platform_info usbhs_info = { + .platform_callback = { + .get_id = usbhs_get_id, + .phy_reset = usbhs_phy_reset, + }, + .driver_param = { + .buswait_bwait = 4, + .detection_delay = 5, + .d0_tx_id = SHDMA_SLAVE_USB1D0_TX, + .d0_rx_id = SHDMA_SLAVE_USB1D0_RX, + .d1_tx_id = SHDMA_SLAVE_USB1D1_TX, + .d1_rx_id = SHDMA_SLAVE_USB1D1_RX, + }, +}; + +static struct resource usbhs_resources[] = { + [0] = { + .start = 0xa4d90000, + .end = 0xa4d90124 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0xa40), + .end = evt2irq(0xa40), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhs_device = { + .name = "renesas_usbhs", + .id = 1, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &usbhs_info, + }, + .num_resources = ARRAY_SIZE(usbhs_resources), + .resource = usbhs_resources, +}; + +/* LCDC and backlight */ +static const struct fb_videomode ecovec_lcd_modes[] = { + { + .name = "Panel", + .xres = 800, + .yres = 480, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 70, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, /* hsync and vsync are active low */ + }, +}; + +static const struct fb_videomode ecovec_dvi_modes[] = { + { + .name = "DVI", + .xres = 1280, + .yres = 720, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 40, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, /* hsync and vsync are active low */ + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { .ch[0] = { .interface_type = RGB18, .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, - .lcd_cfg = { - .sync = 0, /* hsync and vsync are active low */ - }, - .lcd_size_cfg = { /* 7.0 inch */ + .fourcc = V4L2_PIX_FMT_RGB565, + .panel_cfg = { /* 7.0 inch */ .width = 152, .height = 91, }, - .board_cfg = { - }, } }; @@ -255,7 +355,7 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 106, + .start = evt2irq(0xf40), .flags = IORESOURCE_IRQ, }, }; @@ -267,8 +367,19 @@ static struct platform_device lcdc_device = { .dev = { .platform_data = &lcdc_info, }, - .archdata = { - .hwblk_id = HWBLK_LCDC, +}; + +static struct gpio_backlight_platform_data gpio_backlight_data = { + .fbdev = &lcdc_device.dev, + .gpio = GPIO_PTR1, + .def_value = 1, + .name = "backlight", +}; + +static struct platform_device gpio_backlight_device = { + .name = "gpio-backlight", + .dev = { + .platform_data = &gpio_backlight_data, }, }; @@ -285,7 +396,7 @@ static struct resource ceu0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, + .start = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -301,9 +412,6 @@ static struct platform_device ceu0_device = { .dev = { .platform_data = &sh_mobile_ceu0_info, }, - .archdata = { - .hwblk_id = HWBLK_CEU0, - }, }; /* CEU1 */ @@ -319,7 +427,7 @@ static struct resource ceu1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 63, + .start = evt2irq(0x9e0), .flags = IORESOURCE_IRQ, }, [2] = { @@ -335,9 +443,6 @@ static struct platform_device ceu1_device = { .dev = { .platform_data = &sh_mobile_ceu1_info, }, - .archdata = { - .hwblk_id = HWBLK_CEU1, - }, }; /* I2C device */ @@ -353,7 +458,7 @@ static struct i2c_board_info i2c1_devices[] = { }, { I2C_BOARD_INFO("lis3lv02d", 0x1c), - .irq = 33, + .irq = evt2irq(0x620), } }; @@ -379,7 +484,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -392,14 +497,12 @@ static struct platform_device keysc_device = { .dev = { .platform_data = &keysc_info, }, - .archdata = { - .hwblk_id = HWBLK_KEYSC, - }, }; /* TouchScreen */ -#define IRQ0 32 -static int ts_get_pendown_state(void) +#define IRQ0 evt2irq(0x600) + +static int ts_get_pendown_state(struct device *dev) { int val = 0; gpio_free(GPIO_FN_INTC_IRQ0); @@ -420,7 +523,7 @@ static int ts_init(void) return 0; } -struct tsc2007_platform_data tsc2007_info = { +static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, .get_pendown_state = ts_get_pendown_state, @@ -434,26 +537,88 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; -#ifdef CONFIG_MFD_SH_MOBILE_SDHI -/* SHDI0 */ -static void sdhi0_set_pwr(struct platform_device *pdev, int state) +static struct regulator_consumer_supply cn12_power_consumers[] = { - gpio_set_value(GPIO_PTB6, state); -} + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn12_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers), + .consumer_supplies = cn12_power_consumers, +}; + +static struct fixed_voltage_config cn12_power_info = { + .supply_name = "CN12 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB7, + .enable_high = 1, + .init_data = &cn12_power_init_data, +}; + +static struct platform_device cn12_power = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &cn12_power_info, + }, +}; + +#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) +/* SDHI0 */ +static struct regulator_consumer_supply sdhi0_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data sdhi0_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers), + .consumer_supplies = sdhi0_power_consumers, +}; + +static struct fixed_voltage_config sdhi0_power_info = { + .supply_name = "CN11 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB6, + .enable_high = 1, + .init_data = &sdhi0_power_init_data, +}; + +static struct platform_device sdhi0_power = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &sdhi0_power_info, + }, +}; static struct sh_mobile_sdhi_info sdhi0_info = { - .set_pwr = sdhi0_set_pwr, + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | + MMC_CAP_NEEDS_POLL, + .tmio_flags = TMIO_MMC_USE_GPIO_CD, + .cd_gpio = GPIO_PTY7, }; static struct resource sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0x04ce0000, - .end = 0x04ce01ff, + .end = 0x04ce00ff, .flags = IORESOURCE_MEM, }, [1] = { - .start = 100, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; @@ -466,30 +631,28 @@ static struct platform_device sdhi0_device = { .dev = { .platform_data = &sdhi0_info, }, - .archdata = { - .hwblk_id = HWBLK_SDHI0, - }, }; -/* SHDI1 */ -static void sdhi1_set_pwr(struct platform_device *pdev, int state) -{ - gpio_set_value(GPIO_PTB7, state); -} - +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) +/* SDHI1 */ static struct sh_mobile_sdhi_info sdhi1_info = { - .set_pwr = sdhi1_set_pwr, + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, + .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | + MMC_CAP_NEEDS_POLL, + .tmio_flags = TMIO_MMC_USE_GPIO_CD, + .cd_gpio = GPIO_PTW7, }; static struct resource sdhi1_resources[] = { [0] = { .name = "SDHI1", .start = 0x04cf0000, - .end = 0x04cf01ff, + .end = 0x04cf00ff, .flags = IORESOURCE_MEM, }, [1] = { - .start = 23, + .start = evt2irq(0x4e0), .flags = IORESOURCE_IRQ, }, }; @@ -502,35 +665,25 @@ static struct platform_device sdhi1_device = { .dev = { .platform_data = &sdhi1_info, }, - .archdata = { - .hwblk_id = HWBLK_SDHI1, - }, }; +#endif /* CONFIG_MMC_SH_MMCIF */ #else /* MMC SPI */ -static int mmc_spi_get_ro(struct device *dev) -{ - return gpio_get_value(GPIO_PTY6); -} - -static int mmc_spi_get_cd(struct device *dev) -{ - return !gpio_get_value(GPIO_PTY7); -} - static void mmc_spi_setpower(struct device *dev, unsigned int maskval) { gpio_set_value(GPIO_PTB6, maskval ? 1 : 0); } static struct mmc_spi_platform_data mmc_spi_info = { - .get_ro = mmc_spi_get_ro, - .get_cd = mmc_spi_get_cd, .caps = MMC_CAP_NEEDS_POLL, + .caps2 = MMC_CAP2_RO_ACTIVE_HIGH, .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */ .setpower = mmc_spi_setpower, + .flags = MMC_SPI_USE_CD_GPIO | MMC_SPI_USE_RO_GPIO, + .cd_gpio = GPIO_PTY7, + .ro_gpio = GPIO_PTY6, }; static struct spi_board_info spi_bus[] = { @@ -556,7 +709,7 @@ static struct resource msiof0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 84, + .start = evt2irq(0xc80), .flags = IORESOURCE_IRQ, }, }; @@ -569,9 +722,6 @@ static struct platform_device msiof0_device = { }, .num_resources = ARRAY_SIZE(msiof0_resources), .resource = msiof0_resources, - .archdata = { - .hwblk_id = HWBLK_MSIOF0, - }, }; #endif @@ -613,7 +763,6 @@ static struct soc_camera_link tw9910_link = { .bus_id = 1, .power = tw9910_power, .board_info = &i2c_camera[0], - .module_name = "tw9910", .priv = &tw9910_info, }; @@ -637,7 +786,6 @@ static struct soc_camera_link mt9t112_link1 = { .power = mt9t112_power1, .bus_id = 0, .board_info = &i2c_camera[1], - .module_name = "mt9t112", .priv = &mt9t112_info1, }; @@ -660,7 +808,6 @@ static struct soc_camera_link mt9t112_link2 = { .power = mt9t112_power2, .bus_id = 1, .board_info = &i2c_camera[2], - .module_name = "mt9t112", .priv = &mt9t112_info2, }; @@ -689,42 +836,6 @@ static struct platform_device camera_devices[] = { }; /* FSI */ -/* - * FSI-B use external clock which came from da7210. - * So, we should change parent of fsi - */ -#define FCLKBCR 0xa415000c -static void fsimck_init(struct clk *clk) -{ - u32 status = __raw_readl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - - __raw_writel(status, clk->enable_reg); -} - -static struct clk_ops fsimck_clk_ops = { - .init = fsimck_init, -}; - -static struct clk fsimckb_clk = { - .name = "fsimckb_clk", - .id = -1, - .ops = &fsimck_clk_ops, - .enable_reg = (void __iomem *)FCLKBCR, - .rate = 0, /* unknown */ -}; - -struct sh_fsi_platform_info fsi_info = { - .portb_flags = SH_FSI_BRS_INV | - SH_FSI_OUT_SLAVE_MODE | - SH_FSI_IN_SLAVE_MODE | - SH_FSI_OFMT(I2S) | - SH_FSI_IFMT(I2S), -}; - static struct resource fsi_resources[] = { [0] = { .name = "FSI", @@ -733,7 +844,7 @@ static struct resource fsi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 108, + .start = evt2irq(0xf80), .flags = IORESOURCE_IRQ, }, }; @@ -743,14 +854,30 @@ static struct platform_device fsi_device = { .id = 0, .num_resources = ARRAY_SIZE(fsi_resources), .resource = fsi_resources, - .dev = { - .platform_data = &fsi_info, +}; + +static struct asoc_simple_card_info fsi_da7210_info = { + .name = "DA7210", + .card = "FSIB-DA7210", + .codec = "da7210.0-001a", + .platform = "sh_fsi.0", + .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM, + .cpu_dai = { + .name = "fsib-dai", }, - .archdata = { - .hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */ + .codec_dai = { + .name = "da7210-hifi", }, }; +static struct platform_device fsi_da7210_device = { + .name = "asoc-simple-card", + .dev = { + .platform_data = &fsi_da7210_info, + }, +}; + + /* IrDA */ static struct resource irda_resources[] = { [0] = { @@ -760,7 +887,7 @@ static struct resource irda_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 20, + .start = evt2irq(0x480), .flags = IORESOURCE_IRQ, }, }; @@ -771,19 +898,106 @@ static struct platform_device irda_device = { .resource = irda_resources, }; +#include <media/ak881x.h> +#include <media/sh_vou.h> + +static struct ak881x_pdata ak881x_pdata = { + .flags = AK881X_IF_MODE_SLAVE, +}; + +static struct i2c_board_info ak8813 = { + I2C_BOARD_INFO("ak8813", 0x20), + .platform_data = &ak881x_pdata, +}; + +static struct sh_vou_pdata sh_vou_pdata = { + .bus_fmt = SH_VOU_BUS_8BIT, + .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW, + .board_info = &ak8813, + .i2c_adap = 0, +}; + +static struct resource sh_vou_resources[] = { + [0] = { + .start = 0xfe960000, + .end = 0xfe962043, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x8e0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device vou_device = { + .name = "sh-vou", + .id = -1, + .num_resources = ARRAY_SIZE(sh_vou_resources), + .resource = sh_vou_resources, + .dev = { + .platform_data = &sh_vou_pdata, + }, +}; + +#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) +/* SH_MMCIF */ +static struct resource sh_mmcif_resources[] = { + [0] = { + .name = "SH_MMCIF", + .start = 0xA4CA0000, + .end = 0xA4CA00FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* MMC2I */ + .start = evt2irq(0x5a0), + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* MMC3I */ + .start = evt2irq(0x5c0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_mmcif_plat_data sh_mmcif_plat = { + .sup_pclk = 0, /* SH7724: Max Pclk/2 */ + .caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_NEEDS_POLL, + .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static struct platform_device sh_mmcif_device = { + .name = "sh_mmcif", + .id = 0, + .dev = { + .platform_data = &sh_mmcif_plat, + }, + .num_resources = ARRAY_SIZE(sh_mmcif_resources), + .resource = sh_mmcif_resources, +}; +#endif + static struct platform_device *ecovec_devices[] __initdata = { &heartbeat_device, &nor_flash_device, &sh_eth_device, &usb0_host_device, &usb1_common_device, + &usbhs_device, &lcdc_device, + &gpio_backlight_device, &ceu0_device, &ceu1_device, &keysc_device, -#ifdef CONFIG_MFD_SH_MOBILE_SDHI + &cn12_power, +#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) + &sdhi0_power, &sdhi0_device, +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, +#endif #else &msiof0_device, #endif @@ -791,7 +1005,12 @@ static struct platform_device *ecovec_devices[] __initdata = { &camera_devices[1], &camera_devices[2], &fsi_device, + &fsi_da7210_device, &irda_device, + &vou_device, +#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) + &sh_mmcif_device, +#endif }; #ifdef CONFIG_I2C @@ -831,11 +1050,13 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd) return; } - /* read MAC address frome EEPROM */ + /* read MAC address from EEPROM */ for (i = 0; i < sizeof(pd->mac_addr); i++) { pd->mac_addr[i] = mac_read(a, 0x10 + i); msleep(10); } + + i2c_put_adapter(a); } #else static void __init sh_eth_init(struct sh_eth_plat_data *pd) @@ -855,6 +1076,7 @@ extern char ecovec24_sdram_leave_end; static int __init arch_setup(void) { struct clk *clk; + bool cn12_enabled = false; /* register board specific self-refresh code */ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF | @@ -956,11 +1178,9 @@ static int __init arch_setup(void) gpio_request(GPIO_PTE6, NULL); gpio_request(GPIO_PTU1, NULL); - gpio_request(GPIO_PTR1, NULL); gpio_request(GPIO_PTA2, NULL); gpio_direction_input(GPIO_PTE6); gpio_direction_output(GPIO_PTU1, 0); - gpio_direction_output(GPIO_PTR1, 0); gpio_direction_output(GPIO_PTA2, 0); /* I/O buffer drive ability is high */ @@ -969,35 +1189,21 @@ static int __init arch_setup(void) if (gpio_get_value(GPIO_PTE6)) { /* DVI */ lcdc_info.clock_source = LCDC_CLK_EXTERNAL; - lcdc_info.ch[0].clock_divider = 1, - lcdc_info.ch[0].lcd_cfg.name = "DVI"; - lcdc_info.ch[0].lcd_cfg.xres = 1280; - lcdc_info.ch[0].lcd_cfg.yres = 720; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 40; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; + lcdc_info.ch[0].clock_divider = 1; + lcdc_info.ch[0].lcd_modes = ecovec_dvi_modes; + lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_dvi_modes); + + /* No backlight */ + gpio_backlight_data.fbdev = NULL; gpio_set_value(GPIO_PTA2, 1); gpio_set_value(GPIO_PTU1, 1); } else { /* Panel */ - lcdc_info.clock_source = LCDC_CLK_PERIPHERAL; - lcdc_info.ch[0].clock_divider = 2, - lcdc_info.ch[0].lcd_cfg.name = "Panel"; - lcdc_info.ch[0].lcd_cfg.xres = 800; - lcdc_info.ch[0].lcd_cfg.yres = 480; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 70; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; - - gpio_set_value(GPIO_PTR1, 1); + lcdc_info.ch[0].clock_divider = 2; + lcdc_info.ch[0].lcd_modes = ecovec_lcd_modes; + lcdc_info.ch[0].num_modes = ARRAY_SIZE(ecovec_lcd_modes); /* FIXME * @@ -1010,7 +1216,7 @@ static int __init arch_setup(void) /* enable TouchScreen */ i2c_register_board_info(0, &ts_i2c_clients, 1); - set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW); + irq_set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW); } /* enable CEU0 */ @@ -1070,9 +1276,9 @@ static int __init arch_setup(void) gpio_direction_input(GPIO_PTR5); gpio_direction_input(GPIO_PTR6); -#ifdef CONFIG_MFD_SH_MOBILE_SDHI + /* SD-card slot CN11 */ +#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */ - gpio_request(GPIO_FN_SDHI0CD, NULL); gpio_request(GPIO_FN_SDHI0WP, NULL); gpio_request(GPIO_FN_SDHI0CMD, NULL); gpio_request(GPIO_FN_SDHI0CLK, NULL); @@ -1080,23 +1286,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI0D2, NULL); gpio_request(GPIO_FN_SDHI0D1, NULL); gpio_request(GPIO_FN_SDHI0D0, NULL); - gpio_request(GPIO_PTB6, NULL); - gpio_direction_output(GPIO_PTB6, 0); - - /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */ - gpio_request(GPIO_FN_SDHI1CD, NULL); - gpio_request(GPIO_FN_SDHI1WP, NULL); - gpio_request(GPIO_FN_SDHI1CMD, NULL); - gpio_request(GPIO_FN_SDHI1CLK, NULL); - gpio_request(GPIO_FN_SDHI1D3, NULL); - gpio_request(GPIO_FN_SDHI1D2, NULL); - gpio_request(GPIO_FN_SDHI1D1, NULL); - gpio_request(GPIO_FN_SDHI1D0, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); - - /* I/O buffer drive ability is high for SDHI1 */ - __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); @@ -1106,14 +1295,43 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTM4, 1); /* active low CS */ gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */ gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */ - gpio_request(GPIO_PTY6, NULL); /* write protect */ - gpio_direction_input(GPIO_PTY6); - gpio_request(GPIO_PTY7, NULL); /* card detect */ - gpio_direction_input(GPIO_PTY7); spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); #endif + /* MMC/SD-card slot CN12 */ +#if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) + /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */ + gpio_request(GPIO_FN_MMC_D7, NULL); + gpio_request(GPIO_FN_MMC_D6, NULL); + gpio_request(GPIO_FN_MMC_D5, NULL); + gpio_request(GPIO_FN_MMC_D4, NULL); + gpio_request(GPIO_FN_MMC_D3, NULL); + gpio_request(GPIO_FN_MMC_D2, NULL); + gpio_request(GPIO_FN_MMC_D1, NULL); + gpio_request(GPIO_FN_MMC_D0, NULL); + gpio_request(GPIO_FN_MMC_CLK, NULL); + gpio_request(GPIO_FN_MMC_CMD, NULL); + + cn12_enabled = true; +#elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) + /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */ + gpio_request(GPIO_FN_SDHI1WP, NULL); + gpio_request(GPIO_FN_SDHI1CMD, NULL); + gpio_request(GPIO_FN_SDHI1CLK, NULL); + gpio_request(GPIO_FN_SDHI1D3, NULL); + gpio_request(GPIO_FN_SDHI1D2, NULL); + gpio_request(GPIO_FN_SDHI1D1, NULL); + gpio_request(GPIO_FN_SDHI1D0, NULL); + + cn12_enabled = true; +#endif + + if (cn12_enabled) + /* I/O buffer drive ability is high for CN12 */ + __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000, + IODRIVEA); + /* enable Video */ gpio_request(GPIO_PTU2, NULL); gpio_direction_output(GPIO_PTU2, 1); @@ -1136,16 +1354,20 @@ static int __init arch_setup(void) /* set SPU2 clock to 83.4 MHz */ clk = clk_get(NULL, "spu_clk"); - clk_set_rate(clk, clk_round_rate(clk, 83333333)); - clk_put(clk); + if (!IS_ERR(clk)) { + clk_set_rate(clk, clk_round_rate(clk, 83333333)); + clk_put(clk); + } /* change parent of FSI B */ clk = clk_get(NULL, "fsib_clk"); - clk_register(&fsimckb_clk); - clk_set_parent(clk, &fsimckb_clk); - clk_set_rate(clk, 11000); - clk_set_rate(&fsimckb_clk, 11000); - clk_put(clk); + if (!IS_ERR(clk)) { + /* 48kHz dummy clock was used to make sure 1/1 divide */ + clk_set_rate(&sh7724_fsimckb_clk, 48000); + clk_set_parent(clk, &sh7724_fsimckb_clk); + clk_set_rate(clk, 48000); + clk_put(clk); + } gpio_request(GPIO_PTU0, NULL); gpio_direction_output(GPIO_PTU0, 0); @@ -1157,8 +1379,10 @@ static int __init arch_setup(void) /* set VPU clock to 166 MHz */ clk = clk_get(NULL, "vpu_clk"); - clk_set_rate(clk, clk_round_rate(clk, 166000000)); - clk_put(clk); + if (!IS_ERR(clk)) { + clk_set_rate(clk, clk_round_rate(clk, 166000000)); + clk_put(clk); + } /* enable IrDA */ gpio_request(GPIO_FN_IRDA_OUT, NULL); @@ -1173,6 +1397,40 @@ static int __init arch_setup(void) i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); +#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE) + /* VOU */ + gpio_request(GPIO_FN_DV_D15, NULL); + gpio_request(GPIO_FN_DV_D14, NULL); + gpio_request(GPIO_FN_DV_D13, NULL); + gpio_request(GPIO_FN_DV_D12, NULL); + gpio_request(GPIO_FN_DV_D11, NULL); + gpio_request(GPIO_FN_DV_D10, NULL); + gpio_request(GPIO_FN_DV_D9, NULL); + gpio_request(GPIO_FN_DV_D8, NULL); + gpio_request(GPIO_FN_DV_CLKI, NULL); + gpio_request(GPIO_FN_DV_CLK, NULL); + gpio_request(GPIO_FN_DV_VSYNC, NULL); + gpio_request(GPIO_FN_DV_HSYNC, NULL); + + /* AK8813 power / reset sequence */ + gpio_request(GPIO_PTG4, NULL); + gpio_request(GPIO_PTU3, NULL); + /* Reset */ + gpio_direction_output(GPIO_PTG4, 0); + /* Power down */ + gpio_direction_output(GPIO_PTU3, 1); + + udelay(10); + + /* Power up, reset */ + gpio_set_value(GPIO_PTU3, 0); + + udelay(10); + + /* Remove reset */ + gpio_set_value(GPIO_PTG4, 1); +#endif + return platform_add_devices(ecovec_devices, ARRAY_SIZE(ecovec_devices)); } diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile deleted file mode 100644 index cd54acb5149..00000000000 --- a/arch/sh/boards/mach-edosk7705/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the EDOSK7705 specific parts of the kernel -# - -obj-y := setup.o io.o diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c deleted file mode 100644 index 5b9c57c4324..00000000000 --- a/arch/sh/boards/mach-edosk7705/io.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * arch/sh/boards/renesas/edosk7705/io.c - * - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routines for Hitachi EDOSK7705 board. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/io.h> -#include <mach/edosk7705.h> -#include <asm/addrspace.h> - -#define SMC_IOADDR 0xA2000000 - -/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */ -static unsigned long sh_edosk7705_isa_port2addr(unsigned long port) -{ - /* - * SMC91C96 registers are 4 byte aligned rather than the - * usual 2 byte! - */ - if (port >= 0x300 && port < 0x320) - return SMC_IOADDR + ((port - 0x300) * 2); - - maybebadio(port); - return port; -} - -/* Trying to read / write bytes on odd-byte boundaries to the Ethernet - * registers causes problems. So we bit-shift the value and read / write - * in 2 byte chunks. Setting the low byte to 0 does not cause problems - * now as odd byte writes are only made on the bit mask / interrupt - * register. This may not be the case in future Mar-2003 SJD - */ -unsigned char sh_edosk7705_inb(unsigned long port) -{ - if (port >= 0x300 && port < 0x320 && port & 0x01) - return __raw_readw(port - 1) >> 8; - - return __raw_readb(sh_edosk7705_isa_port2addr(port)); -} - -void sh_edosk7705_outb(unsigned char value, unsigned long port) -{ - if (port >= 0x300 && port < 0x320 && port & 0x01) { - __raw_writew(((unsigned short)value << 8), port - 1); - return; - } - - __raw_writeb(value, sh_edosk7705_isa_port2addr(port)); -} - -void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned char *p = addr; - - while (count--) - *p++ = sh_edosk7705_inb(port); -} - -void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned char *p = (unsigned char *)addr; - - while (count--) - sh_edosk7705_outb(*p++, port); -} diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c deleted file mode 100644 index d59225e26fb..00000000000 --- a/arch/sh/boards/mach-edosk7705/setup.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/sh/boards/renesas/edosk7705/setup.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine Support. - * - * Modified for edosk7705 development - * board by S. Dunn, 2003. - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <asm/machvec.h> -#include <mach/edosk7705.h> - -static void __init sh_edosk7705_init_irq(void) -{ - /* This is the Ethernet interrupt */ - make_imask_irq(0x09); -} - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_edosk7705 __initmv = { - .mv_name = "EDOSK7705", - .mv_nr_irqs = 80, - - .mv_inb = sh_edosk7705_inb, - .mv_outb = sh_edosk7705_outb, - - .mv_insb = sh_edosk7705_insb, - .mv_outsb = sh_edosk7705_outsb, - - .mv_init_irq = sh_edosk7705_init_irq, -}; diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index affd66747ba..4a52590fe3d 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -14,6 +14,7 @@ * for more details. */ #include <linux/init.h> +#include <linux/io.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/types.h> @@ -23,6 +24,7 @@ #include <linux/interrupt.h> #include <linux/usb/r8a66597.h> #include <linux/usb/m66592.h> +#include <linux/clkdev.h> #include <net/ax88796.h> #include <asm/machvec.h> #include <mach/highlander.h> @@ -320,13 +322,12 @@ static void ivdr_clk_disable(struct clk *clk) __raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL); } -static struct clk_ops ivdr_clk_ops = { +static struct sh_clk_ops ivdr_clk_ops = { .enable = ivdr_clk_enable, .disable = ivdr_clk_disable, }; static struct clk ivdr_clk = { - .name = "ivdr_clk", .ops = &ivdr_clk_ops, }; @@ -334,6 +335,11 @@ static struct clk *r7780rp_clocks[] = { &ivdr_clk, }; +static struct clk_lookup lookups[] = { + /* main clocks */ + CLKDEV_CON_ID("ivdr_clk", &ivdr_clk), +}; + static void r7780rp_power_off(void) { if (mach_is_r7780mp() || mach_is_r7785rp()) @@ -370,6 +376,8 @@ static void __init highlander_setup(char **cmdline_p) clk_enable(clk); } + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + __raw_writew(0x0000, PA_OBLED); /* Clear LED. */ if (mach_is_r7780rp()) diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c index b49535c0ddd..865d8d6e823 100644 --- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c +++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c @@ -86,7 +86,7 @@ static int __init hp6x0_apm_init(void) int ret; ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt, - IRQF_DISABLED, MODNAME, NULL); + 0, MODNAME, NULL); if (unlikely(ret < 0)) { printk(KERN_ERR MODNAME ": IRQ %d request failed\n", HP680_BTN_IRQ); diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c index 4499a3749d4..8b50cf763c0 100644 --- a/arch/sh/boards/mach-hp6xx/pm.c +++ b/arch/sh/boards/mach-hp6xx/pm.c @@ -14,6 +14,7 @@ #include <linux/gfp.h> #include <asm/io.h> #include <asm/hd64461.h> +#include <asm/bl_bit.h> #include <mach/hp6xx.h> #include <cpu/dac.h> #include <asm/freq.h> @@ -143,7 +144,7 @@ static int hp6x0_pm_enter(suspend_state_t state) return 0; } -static struct platform_suspend_ops hp6x0_pm_ops = { +static const struct platform_suspend_ops hp6x0_pm_ops = { .enter = hp6x0_pm_enter, .valid = suspend_valid_only_mem, }; diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c index 8c9add5f4cf..05797b33f68 100644 --- a/arch/sh/boards/mach-hp6xx/setup.c +++ b/arch/sh/boards/mach-hp6xx/setup.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/irq.h> +#include <linux/sh_intc.h> #include <sound/sh_dac_audio.h> #include <asm/hd64461.h> #include <asm/io.h> @@ -35,7 +36,7 @@ static struct resource cf_ide_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = 77, + .start = evt2irq(0xba0), .flags = IORESOURCE_IRQ, }, }; @@ -168,8 +169,6 @@ device_initcall(hp6xx_devices_setup); static struct sh_machine_vector mv_hp6xx __initmv = { .mv_name = "hp6xx", .mv_setup = hp6xx_setup, - /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */ - .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6, /* Enable IRQ0 -> IRQ3 in IRQ_MODE */ .mv_init_irq = hp6xx_init_irq, }; diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile index 4e577a3bf65..60dd63f4a42 100644 --- a/arch/sh/boards/mach-kfr2r09/Makefile +++ b/arch/sh/boards/mach-kfr2r09/Makefile @@ -1,2 +1,4 @@ -obj-y := setup.o sdram.o -obj-$(CONFIG_FB_SH_MOBILE_LCDC) += lcd_wqvga.o +obj-y := setup.o sdram.o +ifneq ($(CONFIG_FB_SH_MOBILE_LCDC),) +obj-y += lcd_wqvga.o +endif diff --git a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c index e9b970846c4..355a78a3b31 100644 --- a/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c +++ b/arch/sh/boards/mach-kfr2r09/lcd_wqvga.c @@ -251,8 +251,7 @@ static void display_on(void *sohandle, write_memory_start(sohandle, so); } -int kfr2r09_lcd_setup(void *board_data, void *sohandle, - struct sh_mobile_lcdc_sys_bus_ops *so) +int kfr2r09_lcd_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) { /* power on */ gpio_set_value(GPIO_PTF4, 0); /* PROTECT/ -> L */ @@ -273,66 +272,7 @@ int kfr2r09_lcd_setup(void *board_data, void *sohandle, return 0; } -void kfr2r09_lcd_start(void *board_data, void *sohandle, - struct sh_mobile_lcdc_sys_bus_ops *so) +void kfr2r09_lcd_start(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) { write_memory_start(sohandle, so); } - -#define CTRL_CKSW 0x10 -#define CTRL_C10 0x20 -#define CTRL_CPSW 0x80 -#define MAIN_MLED4 0x40 -#define MAIN_MSW 0x80 - -static int kfr2r09_lcd_backlight(int on) -{ - struct i2c_adapter *a; - struct i2c_msg msg; - unsigned char buf[2]; - int ret; - - a = i2c_get_adapter(0); - if (!a) - return -ENODEV; - - buf[0] = 0x00; - if (on) - buf[1] = CTRL_CPSW | CTRL_C10 | CTRL_CKSW; - else - buf[1] = 0; - - msg.addr = 0x75; - msg.buf = buf; - msg.len = 2; - msg.flags = 0; - ret = i2c_transfer(a, &msg, 1); - if (ret != 1) - return -ENODEV; - - buf[0] = 0x01; - if (on) - buf[1] = MAIN_MSW | MAIN_MLED4 | 0x0c; - else - buf[1] = 0; - - msg.addr = 0x75; - msg.buf = buf; - msg.len = 2; - msg.flags = 0; - ret = i2c_transfer(a, &msg, 1); - if (ret != 1) - return -ENODEV; - - return 0; -} - -void kfr2r09_lcd_on(void *board_data) -{ - kfr2r09_lcd_backlight(1); -} - -void kfr2r09_lcd_off(void *board_data) -{ - kfr2r09_lcd_backlight(0); -} diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index b2cd0ed8664..1df4398f837 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -10,6 +10,9 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/interrupt.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mobile_sdhi.h> +#include <linux/mfd/tmio.h> #include <linux/mtd/physmap.h> #include <linux/mtd/onenand.h> #include <linux/delay.h> @@ -18,7 +21,12 @@ #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/i2c.h> +#include <linux/platform_data/lv5207lp.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> +#include <linux/videodev2.h> +#include <linux/sh_intc.h> #include <media/rj54n1cb0c.h> #include <media/soc_camera.h> #include <media/sh_mobile_ceu.h> @@ -106,7 +114,7 @@ static struct resource kfr2r09_sh_keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -119,8 +127,20 @@ static struct platform_device kfr2r09_sh_keysc_device = { .dev = { .platform_data = &kfr2r09_sh_keysc_info, }, - .archdata = { - .hwblk_id = HWBLK_KEYSC, +}; + +static const struct fb_videomode kfr2r09_lcdc_modes[] = { + { + .name = "TX07D34VM0AAA", + .xres = 240, + .yres = 400, + .left_margin = 0, + .right_margin = 16, + .hsync_len = 8, + .upper_margin = 0, + .lower_margin = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }, }; @@ -128,31 +148,17 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = { .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = SYS18, .clock_divider = 6, .flags = LCDC_FLAGS_DWPOL, - .lcd_cfg = { - .name = "TX07D34VM0AAA", - .xres = 240, - .yres = 400, - .left_margin = 0, - .right_margin = 16, - .hsync_len = 8, - .upper_margin = 0, - .lower_margin = 1, - .vsync_len = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - }, - .lcd_size_cfg = { + .lcd_modes = kfr2r09_lcdc_modes, + .num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes), + .panel_cfg = { .width = 35, .height = 58, - }, - .board_cfg = { .setup_sys = kfr2r09_lcd_setup, .start_transfer = kfr2r09_lcd_start, - .display_on = kfr2r09_lcd_on, - .display_off = kfr2r09_lcd_off, }, .sys_bus_cfg = { .ldmt2r = 0x07010904, @@ -171,7 +177,7 @@ static struct resource kfr2r09_sh_lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 106, + .start = evt2irq(0xf40), .flags = IORESOURCE_IRQ, }, }; @@ -183,9 +189,17 @@ static struct platform_device kfr2r09_sh_lcdc_device = { .dev = { .platform_data = &kfr2r09_sh_lcdc_info, }, - .archdata = { - .hwblk_id = HWBLK_LCDC, - }, +}; + +static struct lv5207lp_platform_data kfr2r09_backlight_data = { + .fbdev = &kfr2r09_sh_lcdc_device.dev, + .def_value = 13, + .max_value = 13, +}; + +static struct i2c_board_info kfr2r09_backlight_board_info = { + I2C_BOARD_INFO("lv5207lp", 0x75), + .platform_data = &kfr2r09_backlight_data, }; static struct r8a66597_platdata kfr2r09_usb0_gadget_data = { @@ -199,8 +213,8 @@ static struct resource kfr2r09_usb0_gadget_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, - .end = 65, + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -229,8 +243,8 @@ static struct resource kfr2r09_ceu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, - .end = 52, + .start = evt2irq(0x880), + .end = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -246,9 +260,6 @@ static struct platform_device kfr2r09_ceu_device = { .dev = { .platform_data = &sh_mobile_ceu_info, }, - .archdata = { - .hwblk_id = HWBLK_CEU0, - }, }; static struct i2c_board_info kfr2r09_i2c_camera = { @@ -331,7 +342,6 @@ static struct soc_camera_link rj54n1_link = { .power = camera_power, .board_info = &kfr2r09_i2c_camera, .i2c_adapter_id = 1, - .module_name = "rj54n1cb0c", .priv = &rj54n1_priv, }; @@ -343,25 +353,39 @@ static struct platform_device kfr2r09_camera = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource kfr2r09_sh_sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0x04ce0000, - .end = 0x04ce01ff, + .end = 0x04ce00ff, .flags = IORESOURCE_MEM, }, [1] = { - .start = 100, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; +static struct sh_mobile_sdhi_info sh7724_sdhi0_data = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_caps = MMC_CAP_SDIO_IRQ, +}; + static struct platform_device kfr2r09_sh_sdhi0_device = { .name = "sh_mobile_sdhi", .num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources), .resource = kfr2r09_sh_sdhi0_resources, - .archdata = { - .hwblk_id = HWBLK_SDHI0, + .dev = { + .platform_data = &sh7724_sdhi0_data, }, }; @@ -518,6 +542,9 @@ static int __init kfr2r09_devices_setup(void) &kfr2r09_sdram_leave_start, &kfr2r09_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* enable SCIF1 serial port for YC401 console support */ gpio_request(GPIO_FN_SCIF1_RXD, NULL); gpio_request(GPIO_FN_SCIF1_TXD, NULL); @@ -607,6 +634,8 @@ static int __init kfr2r09_devices_setup(void) gpio_request(GPIO_FN_SDHI0CMD, NULL); gpio_request(GPIO_FN_SDHI0CLK, NULL); + i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1); + return platform_add_devices(kfr2r09_devices, ARRAY_SIZE(kfr2r09_devices)); } diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c index 01e6abb769b..8132dff078f 100644 --- a/arch/sh/boards/mach-landisk/gio.c +++ b/arch/sh/boards/mach-landisk/gio.c @@ -128,6 +128,7 @@ static const struct file_operations gio_fops = { .open = gio_open, /* open */ .release = gio_close, /* release */ .unlocked_ioctl = gio_ioctl, + .llseek = noop_llseek, }; static int __init gio_init(void) diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c index 96f38a4187d..c00ace38db3 100644 --- a/arch/sh/boards/mach-landisk/irq.c +++ b/arch/sh/boards/mach-landisk/irq.c @@ -1,9 +1,10 @@ /* - * arch/sh/boards/landisk/irq.c + * arch/sh/boards/mach-landisk/irq.c * * I-O DATA Device, Inc. LANDISK Support * * Copyright (C) 2005-2007 kogiidena + * Copyright (C) 2011 Nobuhiro Iwamatsu * * Copyright (C) 2001 Ian da Silva, Jeremy Siegel * Based largely on io_se.c. @@ -12,45 +13,54 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ + #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> #include <mach-landisk/mach/iodata_landisk.h> -static void disable_landisk_irq(unsigned int irq) -{ - unsigned char mask = 0xff ^ (0x01 << (irq - 5)); +enum { + UNUSED = 0, - __raw_writeb(__raw_readb(PA_IMASK) & mask, PA_IMASK); -} - -static void enable_landisk_irq(unsigned int irq) -{ - unsigned char value = (0x01 << (irq - 5)); + PCI_INTA, /* PCI int A */ + PCI_INTB, /* PCI int B */ + PCI_INTC, /* PCI int C */ + PCI_INTD, /* PCI int D */ + ATA, /* ATA */ + FATA, /* CF */ + POWER, /* Power swtich */ + BUTTON, /* Button swtich */ +}; - __raw_writeb(__raw_readb(PA_IMASK) | value, PA_IMASK); -} +/* Vectors for LANDISK */ +static struct intc_vect vectors_landisk[] __initdata = { + INTC_IRQ(PCI_INTA, IRQ_PCIINTA), + INTC_IRQ(PCI_INTB, IRQ_PCIINTB), + INTC_IRQ(PCI_INTC, IRQ_PCIINTC), + INTC_IRQ(PCI_INTD, IRQ_PCIINTD), + INTC_IRQ(ATA, IRQ_ATA), + INTC_IRQ(FATA, IRQ_FATA), + INTC_IRQ(POWER, IRQ_POWER), + INTC_IRQ(BUTTON, IRQ_BUTTON), +}; -static struct irq_chip landisk_irq_chip __read_mostly = { - .name = "LANDISK", - .mask = disable_landisk_irq, - .unmask = enable_landisk_irq, - .mask_ack = disable_landisk_irq, +/* IRLMSK mask register layout for LANDISK */ +static struct intc_mask_reg mask_registers_landisk[] __initdata = { + { PA_IMASK, 0, 8, /* IRLMSK */ + { BUTTON, POWER, FATA, ATA, + PCI_INTD, PCI_INTC, PCI_INTB, PCI_INTA, + } + }, }; +static DECLARE_INTC_DESC(intc_desc_landisk, "landisk", vectors_landisk, NULL, + mask_registers_landisk, NULL, NULL); /* * Initialize IRQ setting */ void __init init_landisk_IRQ(void) { - int i; - - for (i = 5; i < 14; i++) { - disable_irq_nosync(i); - set_irq_chip_and_handler_name(i, &landisk_irq_chip, - handle_level_irq, "level"); - enable_landisk_irq(i); - } + register_intc_controller(&intc_desc_landisk); __raw_writeb(0x00, PA_PWRINT_CLR); } diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c index 50337acc18c..f1147caebac 100644 --- a/arch/sh/boards/mach-landisk/setup.c +++ b/arch/sh/boards/mach-landisk/setup.c @@ -21,11 +21,9 @@ #include <mach-landisk/mach/iodata_landisk.h> #include <asm/io.h> -void init_landisk_IRQ(void); - static void landisk_power_off(void) { - __raw_writeb(0x01, PA_SHUTDOWN); + __raw_writeb(0x01, PA_SHUTDOWN); } static struct resource cf_ide_resources[3]; @@ -83,11 +81,11 @@ static int __init landisk_devices_setup(void) ARRAY_SIZE(landisk_devices)); } -__initcall(landisk_devices_setup); +device_initcall(landisk_devices_setup); static void __init landisk_setup(char **cmdline_p) { - /* LED ON */ + /* LED ON */ __raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED); printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n"); @@ -99,7 +97,6 @@ static void __init landisk_setup(char **cmdline_p) */ static struct sh_machine_vector mv_landisk __initmv = { .mv_name = "LANDISK", - .mv_nr_irqs = 72, .mv_setup = landisk_setup, .mv_init_irq = init_landisk_IRQ, }; diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c index 79b4e0d77b7..6660622aa45 100644 --- a/arch/sh/boards/mach-lboxre2/setup.c +++ b/arch/sh/boards/mach-lboxre2/setup.c @@ -79,6 +79,5 @@ device_initcall(lboxre2_devices_setup); */ static struct sh_machine_vector mv_lboxre2 __initmv = { .mv_name = "L-BOX RE2", - .mv_nr_irqs = 72, .mv_init_irq = init_lboxre2_IRQ, }; diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c index 2960c659020..acdafb0c640 100644 --- a/arch/sh/boards/mach-microdev/io.c +++ b/arch/sh/boards/mach-microdev/io.c @@ -54,7 +54,7 @@ /* * map I/O ports to memory-mapped addresses */ -static unsigned long microdev_isa_port2addr(unsigned long offset) +void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len) { unsigned long result; @@ -72,16 +72,6 @@ static unsigned long microdev_isa_port2addr(unsigned long offset) * Configuration Registers */ result = IO_SUPERIO_PHYS + (offset << 1); -#if 0 - } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG || - offset == KBD_STATUS_REG) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * PS/2 Keyboard + Mouse (ports 0x60 and 0x64). - */ - result = IO_SUPERIO_PHYS + (offset << 1); -#endif } else if (((offset >= IO_IDE1_BASE) && (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) || (offset == IO_IDE1_MISC)) { @@ -131,237 +121,5 @@ static unsigned long microdev_isa_port2addr(unsigned long offset) result = PVR; } - return result; -} - -#define PORT2ADDR(x) (microdev_isa_port2addr(x)) - -static inline void delay(void) -{ -#if defined(CONFIG_PCI) - /* System board present, just make a dummy SRAM access. (CS0 will be - mapped to PCI memory, probably good to avoid it.) */ - __raw_readw(0xa6800000); -#else - /* CS0 will be mapped to flash, ROM etc so safe to access it. */ - __raw_readw(0xa0000000); -#endif -} - -unsigned char microdev_inb(unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) - return microdev_pci_inb(port); -#endif - return *(volatile unsigned char*)PORT2ADDR(port); -} - -unsigned short microdev_inw(unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) - return microdev_pci_inw(port); -#endif - return *(volatile unsigned short*)PORT2ADDR(port); -} - -unsigned int microdev_inl(unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) - return microdev_pci_inl(port); -#endif - return *(volatile unsigned int*)PORT2ADDR(port); -} - -void microdev_outw(unsigned short b, unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) { - microdev_pci_outw(b, port); - return; - } -#endif - *(volatile unsigned short*)PORT2ADDR(port) = b; -} - -void microdev_outb(unsigned char b, unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) { - microdev_pci_outb(b, port); - return; - } -#endif - - /* - * There is a board feature with the current SH4-202 MicroDev in - * that the 2 byte enables (nBE0 and nBE1) are tied together (and - * to the Chip Select Line (Ethernet_CS)). Due to this connectivity, - * it is not possible to safely perform 8-bit writes to the - * Ethernet registers, as 16-bits will be consumed from the Data - * lines (corrupting the other byte). Hence, this function is - * written to implement 16-bit read/modify/write for all byte-wide - * accesses. - * - * Note: there is no problem with byte READS (even or odd). - * - * Sean McGoogan - 16th June 2003. - */ - if ((port >= IO_LAN91C111_BASE) && - (port < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { - /* - * Then are trying to perform a byte-write to the - * LAN91C111. This needs special care. - */ - if (port % 2 == 1) { /* is the port odd ? */ - /* unset bit-0, i.e. make even */ - const unsigned long evenPort = port-1; - unsigned short word; - - /* - * do a 16-bit read/write to write to 'port', - * preserving even byte. - * - * Even addresses are bits 0-7 - * Odd addresses are bits 8-15 - */ - word = microdev_inw(evenPort); - word = (word & 0xffu) | (b << 8); - microdev_outw(word, evenPort); - } else { - /* else, we are trying to do an even byte write */ - unsigned short word; - - /* - * do a 16-bit read/write to write to 'port', - * preserving odd byte. - * - * Even addresses are bits 0-7 - * Odd addresses are bits 8-15 - */ - word = microdev_inw(port); - word = (word & 0xff00u) | (b); - microdev_outw(word, port); - } - } else { - *(volatile unsigned char*)PORT2ADDR(port) = b; - } -} - -void microdev_outl(unsigned int b, unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) { - microdev_pci_outl(b, port); - return; - } -#endif - *(volatile unsigned int*)PORT2ADDR(port) = b; -} - -unsigned char microdev_inb_p(unsigned long port) -{ - unsigned char v = microdev_inb(port); - delay(); - return v; -} - -unsigned short microdev_inw_p(unsigned long port) -{ - unsigned short v = microdev_inw(port); - delay(); - return v; -} - -unsigned int microdev_inl_p(unsigned long port) -{ - unsigned int v = microdev_inl(port); - delay(); - return v; -} - -void microdev_outb_p(unsigned char b, unsigned long port) -{ - microdev_outb(b, port); - delay(); -} - -void microdev_outw_p(unsigned short b, unsigned long port) -{ - microdev_outw(b, port); - delay(); -} - -void microdev_outl_p(unsigned int b, unsigned long port) -{ - microdev_outl(b, port); - delay(); -} - -void microdev_insb(unsigned long port, void *buffer, unsigned long count) -{ - volatile unsigned char *port_addr; - unsigned char *buf = buffer; - - port_addr = (volatile unsigned char *)PORT2ADDR(port); - - while (count--) - *buf++ = *port_addr; -} - -void microdev_insw(unsigned long port, void *buffer, unsigned long count) -{ - volatile unsigned short *port_addr; - unsigned short *buf = buffer; - - port_addr = (volatile unsigned short *)PORT2ADDR(port); - - while (count--) - *buf++ = *port_addr; -} - -void microdev_insl(unsigned long port, void *buffer, unsigned long count) -{ - volatile unsigned long *port_addr; - unsigned int *buf = buffer; - - port_addr = (volatile unsigned long *)PORT2ADDR(port); - - while (count--) - *buf++ = *port_addr; -} - -void microdev_outsb(unsigned long port, const void *buffer, unsigned long count) -{ - volatile unsigned char *port_addr; - const unsigned char *buf = buffer; - - port_addr = (volatile unsigned char *)PORT2ADDR(port); - - while (count--) - *port_addr = *buf++; -} - -void microdev_outsw(unsigned long port, const void *buffer, unsigned long count) -{ - volatile unsigned short *port_addr; - const unsigned short *buf = buffer; - - port_addr = (volatile unsigned short *)PORT2ADDR(port); - - while (count--) - *port_addr = *buf++; -} - -void microdev_outsl(unsigned long port, const void *buffer, unsigned long count) -{ - volatile unsigned long *port_addr; - const unsigned int *buf = buffer; - - port_addr = (volatile unsigned long *)PORT2ADDR(port); - - while (count--) - *port_addr = *buf++; + return (void __iomem *)result; } diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c index a26d16669aa..9a8aff33961 100644 --- a/arch/sh/boards/mach-microdev/irq.c +++ b/arch/sh/boards/mach-microdev/irq.c @@ -12,7 +12,6 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/system.h> #include <asm/io.h> #include <mach/microdev.h> @@ -65,19 +64,9 @@ static const struct { # error Inconsistancy in defining the IRQ# for primary IDE! #endif -static void enable_microdev_irq(unsigned int irq); -static void disable_microdev_irq(unsigned int irq); -static void mask_and_ack_microdev(unsigned int); - -static struct irq_chip microdev_irq_type = { - .name = "MicroDev-IRQ", - .unmask = enable_microdev_irq, - .mask = disable_microdev_irq, - .ack = mask_and_ack_microdev, -}; - -static void disable_microdev_irq(unsigned int irq) +static void disable_microdev_irq(struct irq_data *data) { + unsigned int irq = data->irq; unsigned int fpgaIrq; if (irq >= NUM_EXTERNAL_IRQS) @@ -91,8 +80,9 @@ static void disable_microdev_irq(unsigned int irq) __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); } -static void enable_microdev_irq(unsigned int irq) +static void enable_microdev_irq(struct irq_data *data) { + unsigned int irq = data->irq; unsigned long priorityReg, priorities, pri; unsigned int fpgaIrq; @@ -116,17 +106,18 @@ static void enable_microdev_irq(unsigned int irq) __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); } +static struct irq_chip microdev_irq_type = { + .name = "MicroDev-IRQ", + .irq_unmask = enable_microdev_irq, + .irq_mask = disable_microdev_irq, +}; + /* This function sets the desired irq handler to be a MicroDev type */ static void __init make_microdev_irq(unsigned int irq) { disable_irq_nosync(irq); - set_irq_chip_and_handler(irq, µdev_irq_type, handle_level_irq); - disable_microdev_irq(irq); -} - -static void mask_and_ack_microdev(unsigned int irq) -{ - disable_microdev_irq(irq); + irq_set_chip_and_handler(irq, µdev_irq_type, handle_level_irq); + disable_microdev_irq(irq_get_irq_data(irq)); } extern void __init init_microdev_irq(void) diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c index d1df2a4fb9b..6c66ee4d842 100644 --- a/arch/sh/boards/mach-microdev/setup.c +++ b/arch/sh/boards/mach-microdev/setup.c @@ -194,28 +194,6 @@ device_initcall(microdev_devices_setup); */ static struct sh_machine_vector mv_sh4202_microdev __initmv = { .mv_name = "SH4-202 MicroDev", - .mv_nr_irqs = 72, - - .mv_inb = microdev_inb, - .mv_inw = microdev_inw, - .mv_inl = microdev_inl, - .mv_outb = microdev_outb, - .mv_outw = microdev_outw, - .mv_outl = microdev_outl, - - .mv_inb_p = microdev_inb_p, - .mv_inw_p = microdev_inw_p, - .mv_inl_p = microdev_inl_p, - .mv_outb_p = microdev_outb_p, - .mv_outw_p = microdev_outw_p, - .mv_outl_p = microdev_outl_p, - - .mv_insb = microdev_insb, - .mv_insw = microdev_insw, - .mv_insl = microdev_insl, - .mv_outsb = microdev_outsb, - .mv_outsw = microdev_outsw, - .mv_outsl = microdev_outsl, - + .mv_ioport_map = microdev_ioport_map, .mv_init_irq = init_microdev_irq, }; diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c index de9014a8a93..8bccd345b69 100644 --- a/arch/sh/boards/mach-migor/lcd_qvga.c +++ b/arch/sh/boards/mach-migor/lcd_qvga.c @@ -113,8 +113,7 @@ static const unsigned short magic3_data[] = { 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061, }; -int migor_lcd_qvga_setup(void *board_data, void *sohandle, - struct sh_mobile_lcdc_sys_bus_ops *so) +int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) { unsigned long xres = 320; unsigned long yres = 240; diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 7da0fc94a01..8b73194ed2c 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -12,16 +12,23 @@ #include <linux/interrupt.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smc91x.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/videodev2.h> +#include <linux/sh_intc.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <media/ov772x.h> +#include <media/soc_camera.h> #include <media/tw9910.h> #include <asm/clock.h> #include <asm/machvec.h> @@ -50,7 +57,7 @@ static struct resource smc91x_eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 32, /* IRQ0 */ + .start = evt2irq(0x600), /* IRQ0 */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; @@ -84,7 +91,7 @@ static struct resource sh_keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -97,9 +104,6 @@ static struct platform_device sh_keysc_device = { .dev = { .platform_data = &sh_keysc_info, }, - .archdata = { - .hwblk_id = HWBLK_KEYSC, - }, }; static struct mtd_partition migor_nor_flash_partitions[] = @@ -180,13 +184,12 @@ static int migor_nand_flash_ready(struct mtd_info *mtd) return gpio_get_value(GPIO_PTA1); /* NAND_RBn */ } -struct platform_nand_data migor_nand_flash_data = { +static struct platform_nand_data migor_nand_flash_data = { .chip = { .nr_chips = 1, .partitions = migor_nand_flash_partitions, .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions), .chip_delay = 20, - .part_probe_types = (const char *[]) { "cmdlinepart", NULL }, }, .ctrl = { .dev_ready = migor_nand_flash_ready, @@ -212,56 +215,58 @@ static struct platform_device migor_nand_flash_device = { } }; +static const struct fb_videomode migor_lcd_modes[] = { + { +#if defined(CONFIG_SH_MIGOR_RTA_WVGA) + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 64, + .right_margin = 16, + .hsync_len = 120, + .sync = 0, +#elif defined(CONFIG_SH_MIGOR_QVGA) + .name = "PH240320T", + .xres = 320, + .yres = 240, + .left_margin = 0, + .right_margin = 16, + .hsync_len = 8, + .sync = FB_SYNC_HOR_HIGH_ACT, +#endif + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + }, +}; + static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { -#ifdef CONFIG_SH_MIGOR_RTA_WVGA +#if defined(CONFIG_SH_MIGOR_RTA_WVGA) .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB16, .clock_divider = 2, - .lcd_cfg = { - .name = "LB070WV1", - .xres = 800, - .yres = 480, - .left_margin = 64, - .right_margin = 16, - .hsync_len = 120, - .upper_margin = 1, - .lower_margin = 17, - .vsync_len = 2, - .sync = 0, - }, - .lcd_size_cfg = { /* 7.0 inch */ + .lcd_modes = migor_lcd_modes, + .num_modes = ARRAY_SIZE(migor_lcd_modes), + .panel_cfg = { /* 7.0 inch */ .width = 152, .height = 91, }, } -#endif -#ifdef CONFIG_SH_MIGOR_QVGA +#elif defined(CONFIG_SH_MIGOR_QVGA) .clock_source = LCDC_CLK_PERIPHERAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = SYS16A, .clock_divider = 10, - .lcd_cfg = { - .name = "PH240320T", - .xres = 320, - .yres = 240, - .left_margin = 0, - .right_margin = 16, - .hsync_len = 8, - .upper_margin = 1, - .lower_margin = 17, - .vsync_len = 2, - .sync = FB_SYNC_HOR_HIGH_ACT, - }, - .lcd_size_cfg = { /* 2.4 inch */ - .width = 49, + .lcd_modes = migor_lcd_modes, + .num_modes = ARRAY_SIZE(migor_lcd_modes), + .panel_cfg = { + .width = 49, /* 2.4 inch */ .height = 37, - }, - .board_cfg = { .setup_sys = migor_lcd_qvga_setup, }, .sys_bus_cfg = { @@ -282,7 +287,7 @@ static struct resource migor_lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 28, + .start = evt2irq(0x580), .flags = IORESOURCE_IRQ, }, }; @@ -294,9 +299,6 @@ static struct platform_device migor_lcdc_device = { .dev = { .platform_data = &sh_mobile_lcdc_info, }, - .archdata = { - .hwblk_id = HWBLK_LCDC, - }, }; static struct clk *camera_clk; @@ -368,7 +370,7 @@ static struct resource migor_ceu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, + .start = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -384,30 +386,40 @@ static struct platform_device migor_ceu_device = { .dev = { .platform_data = &sh_mobile_ceu_info, }, - .archdata = { - .hwblk_id = HWBLK_CEU, - }, +}; + +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), }; static struct resource sdhi_cn9_resources[] = { [0] = { .name = "SDHI", .start = 0x04ce0000, - .end = 0x04ce01ff, + .end = 0x04ce00ff, .flags = IORESOURCE_MEM, }, [1] = { - .start = 100, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; +static struct sh_mobile_sdhi_info sh7724_sdhi_data = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_caps = MMC_CAP_SDIO_IRQ, +}; + static struct platform_device sdhi_cn9_device = { .name = "sh_mobile_sdhi", .num_resources = ARRAY_SIZE(sdhi_cn9_resources), .resource = sdhi_cn9_resources, - .archdata = { - .hwblk_id = HWBLK_SDHI, + .dev = { + .platform_data = &sh7724_sdhi_data, }, }; @@ -417,7 +429,7 @@ static struct i2c_board_info migor_i2c_devices[] = { }, { I2C_BOARD_INFO("migor_ts", 0x51), - .irq = 38, /* IRQ6 */ + .irq = evt2irq(0x6c0), /* IRQ6 */ }, { I2C_BOARD_INFO("wm8978", 0x1a), @@ -433,15 +445,12 @@ static struct i2c_board_info migor_i2c_camera[] = { }, }; -static struct ov772x_camera_info ov7725_info = { - .flags = OV772X_FLAG_8BIT, -}; +static struct ov772x_camera_info ov7725_info; static struct soc_camera_link ov7725_link = { .power = ov7725_power, .board_info = &migor_i2c_camera[0], .i2c_adapter_id = 0, - .module_name = "ov772x", .priv = &ov7725_info, }; @@ -454,7 +463,6 @@ static struct soc_camera_link tw9910_link = { .power = tw9910_power, .board_info = &migor_i2c_camera[1], .i2c_adapter_id = 0, - .module_name = "tw9910", .priv = &tw9910_info, }; @@ -499,6 +507,10 @@ static int __init migor_devices_setup(void) &migor_sdram_enter_end, &migor_sdram_leave_start, &migor_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Let D11 LED show STATUS0 */ gpio_request(GPIO_FN_STATUS0, NULL); diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c index b84df6a3a93..4b98a5251f8 100644 --- a/arch/sh/boards/mach-r2d/setup.c +++ b/arch/sh/boards/mach-r2d/setup.c @@ -258,7 +258,7 @@ static int __init rts7751r2d_devices_setup(void) return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } -__initcall(rts7751r2d_devices_setup); +device_initcall(rts7751r2d_devices_setup); static void rts7751r2d_power_off(void) { diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig index aeff3b04220..458a11ffd02 100644 --- a/arch/sh/boards/mach-rsk/Kconfig +++ b/arch/sh/boards/mach-rsk/Kconfig @@ -13,6 +13,16 @@ config SH_RSK7203 select ARCH_REQUIRE_GPIOLIB depends on CPU_SUBTYPE_SH7203 +config SH_RSK7264 + bool "RSK2+SH7264" + select ARCH_REQUIRE_GPIOLIB + depends on CPU_SUBTYPE_SH7264 + +config SH_RSK7269 + bool "RSK2+SH7269" + select ARCH_REQUIRE_GPIOLIB + depends on CPU_SUBTYPE_SH7269 + endchoice endif diff --git a/arch/sh/boards/mach-rsk/Makefile b/arch/sh/boards/mach-rsk/Makefile index 498da75ce38..6a4e1b538a6 100644 --- a/arch/sh/boards/mach-rsk/Makefile +++ b/arch/sh/boards/mach-rsk/Makefile @@ -1,2 +1,4 @@ obj-y := setup.o obj-$(CONFIG_SH_RSK7203) += devices-rsk7203.o +obj-$(CONFIG_SH_RSK7264) += devices-rsk7264.o +obj-$(CONFIG_SH_RSK7269) += devices-rsk7269.o diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c index 4fa08ba1025..a8089f79d05 100644 --- a/arch/sh/boards/mach-rsk/devices-rsk7203.c +++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c @@ -1,7 +1,7 @@ /* * Renesas Technology Europe RSK+ 7203 Support. * - * Copyright (C) 2008 Paul Mundt + * Copyright (C) 2008 - 2010 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -12,7 +12,9 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/smsc911x.h> +#include <linux/input.h> #include <linux/gpio.h> +#include <linux/gpio_keys.h> #include <linux/leds.h> #include <asm/machvec.h> #include <asm/io.h> @@ -84,9 +86,42 @@ static struct platform_device led_device = { }, }; +static struct gpio_keys_button rsk7203_gpio_keys_table[] = { + { + .code = BTN_0, + .gpio = GPIO_PB0, + .active_low = 1, + .desc = "SW1", + }, { + .code = BTN_1, + .gpio = GPIO_PB1, + .active_low = 1, + .desc = "SW2", + }, { + .code = BTN_2, + .gpio = GPIO_PB2, + .active_low = 1, + .desc = "SW3", + }, +}; + +static struct gpio_keys_platform_data rsk7203_gpio_keys_info = { + .buttons = rsk7203_gpio_keys_table, + .nbuttons = ARRAY_SIZE(rsk7203_gpio_keys_table), + .poll_interval = 50, /* default to 50ms */ +}; + +static struct platform_device keys_device = { + .name = "gpio-keys-polled", + .dev = { + .platform_data = &rsk7203_gpio_keys_info, + }, +}; + static struct platform_device *rsk7203_devices[] __initdata = { &smsc911x_device, &led_device, + &keys_device, }; static int __init rsk7203_devices_setup(void) diff --git a/arch/sh/boards/mach-rsk/devices-rsk7264.c b/arch/sh/boards/mach-rsk/devices-rsk7264.c new file mode 100644 index 00000000000..7251e37a842 --- /dev/null +++ b/arch/sh/boards/mach-rsk/devices-rsk7264.c @@ -0,0 +1,58 @@ +/* + * RSK+SH7264 Support. + * + * Copyright (C) 2012 Renesas Electronics Europe + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/smsc911x.h> +#include <asm/machvec.h> +#include <asm/io.h> + +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = 0x28000000, + .end = 0x280000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct platform_device *rsk7264_devices[] __initdata = { + &smsc911x_device, +}; + +static int __init rsk7264_devices_setup(void) +{ + return platform_add_devices(rsk7264_devices, + ARRAY_SIZE(rsk7264_devices)); +} +device_initcall(rsk7264_devices_setup); diff --git a/arch/sh/boards/mach-rsk/devices-rsk7269.c b/arch/sh/boards/mach-rsk/devices-rsk7269.c new file mode 100644 index 00000000000..4a544591d6f --- /dev/null +++ b/arch/sh/boards/mach-rsk/devices-rsk7269.c @@ -0,0 +1,60 @@ +/* + * RSK+SH7269 Support + * + * Copyright (C) 2012 Renesas Electronics Europe Ltd + * Copyright (C) 2012 Phil Edworthy + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/smsc911x.h> +#include <linux/gpio.h> +#include <asm/machvec.h> +#include <asm/io.h> + +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = 0x24000000, + .end = 0x240000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 85, + .end = 85, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct platform_device *rsk7269_devices[] __initdata = { + &smsc911x_device, +}; + +static int __init rsk7269_devices_setup(void) +{ + return platform_add_devices(rsk7269_devices, + ARRAY_SIZE(rsk7269_devices)); +} +device_initcall(rsk7269_devices_setup); diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c index a5c0df785bf..2685ea03b06 100644 --- a/arch/sh/boards/mach-rsk/setup.c +++ b/arch/sh/boards/mach-rsk/setup.c @@ -15,12 +15,20 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#ifdef CONFIG_MTD #include <linux/mtd/map.h> -#endif +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <asm/machvec.h> #include <asm/io.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + +static const char *part_probes[] = { "cmdlinepart", NULL }; + static struct mtd_partition rsk_partitions[] = { { .name = "Bootloader", @@ -39,9 +47,10 @@ static struct mtd_partition rsk_partitions[] = { }; static struct physmap_flash_data flash_data = { - .parts = rsk_partitions, - .nr_parts = ARRAY_SIZE(rsk_partitions), - .width = 2, + .parts = rsk_partitions, + .nr_parts = ARRAY_SIZE(rsk_partitions), + .width = 2, + .part_probe_types = part_probes, }; static struct resource flash_resource = { @@ -60,44 +69,14 @@ static struct platform_device flash_device = { }, }; -#ifdef CONFIG_MTD -static const char *probes[] = { "cmdlinepart", NULL }; - -static struct map_info rsk_flash_map = { - .name = "RSK+ Flash", - .size = 0x400000, - .bankwidth = 2, -}; - -static struct mtd_info *flash_mtd; - -static struct mtd_partition *parsed_partitions; - -static void __init set_mtd_partitions(void) -{ - int nr_parts = 0; - - simple_map_init(&rsk_flash_map); - flash_mtd = do_map_probe("cfi_probe", &rsk_flash_map); - nr_parts = parse_mtd_partitions(flash_mtd, probes, - &parsed_partitions, 0); - /* If there is no partition table, used the hard coded table */ - if (nr_parts > 0) { - flash_data.nr_parts = nr_parts; - flash_data.parts = parsed_partitions; - } -} -#else -static inline void set_mtd_partitions(void) {} -#endif - static struct platform_device *rsk_devices[] __initdata = { &flash_device, }; static int __init rsk_devices_setup(void) { - set_mtd_partitions(); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(rsk_devices, ARRAY_SIZE(rsk_devices)); } diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c index 4da38db4b5f..2241659c329 100644 --- a/arch/sh/boards/mach-sdk7780/setup.c +++ b/arch/sh/boards/mach-sdk7780/setup.c @@ -94,7 +94,6 @@ static void __init sdk7780_setup(char **cmdline_p) static struct sh_machine_vector mv_se7780 __initmv = { .mv_name = "Renesas SDK7780-R3" , .mv_setup = sdk7780_setup, - .mv_nr_irqs = 111, .mv_init_irq = init_sdk7780_IRQ, }; diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile index a29f19e85b6..45d32e3590b 100644 --- a/arch/sh/boards/mach-sdk7786/Makefile +++ b/arch/sh/boards/mach-sdk7786/Makefile @@ -1 +1,4 @@ -obj-y := setup.o fpga.o irq.o +obj-y := fpga.o irq.o nmi.o setup.o + +obj-$(CONFIG_GPIOLIB) += gpio.o +obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o diff --git a/arch/sh/boards/mach-sdk7786/gpio.c b/arch/sh/boards/mach-sdk7786/gpio.c new file mode 100644 index 00000000000..f71ce09d4e1 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/gpio.c @@ -0,0 +1,49 @@ +/* + * SDK7786 FPGA USRGPIR Support. + * + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <mach/fpga.h> + +#define NR_FPGA_GPIOS 8 + +static const char *usrgpir_gpio_names[NR_FPGA_GPIOS] = { + "in0", "in1", "in2", "in3", "in4", "in5", "in6", "in7", +}; + +static int usrgpir_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + /* always in */ + return 0; +} + +static int usrgpir_gpio_get(struct gpio_chip *chip, unsigned gpio) +{ + return !!(fpga_read_reg(USRGPIR) & (1 << gpio)); +} + +static struct gpio_chip usrgpir_gpio_chip = { + .label = "sdk7786-fpga", + .names = usrgpir_gpio_names, + .direction_input = usrgpir_gpio_direction_input, + .get = usrgpir_gpio_get, + .base = -1, /* don't care */ + .ngpio = NR_FPGA_GPIOS, +}; + +static int __init usrgpir_gpio_setup(void) +{ + return gpiochip_add(&usrgpir_gpio_chip); +} +device_initcall(usrgpir_gpio_setup); diff --git a/arch/sh/boards/mach-sdk7786/nmi.c b/arch/sh/boards/mach-sdk7786/nmi.c new file mode 100644 index 00000000000..edcfa1f568b --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/nmi.c @@ -0,0 +1,83 @@ +/* + * SDK7786 FPGA NMI Support. + * + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <mach/fpga.h> + +enum { + NMI_MODE_MANUAL, + NMI_MODE_AUX, + NMI_MODE_MASKED, + NMI_MODE_ANY, + NMI_MODE_UNKNOWN, +}; + +/* + * Default to the manual NMI switch. + */ +static unsigned int __initdata nmi_mode = NMI_MODE_ANY; + +static int __init nmi_mode_setup(char *str) +{ + if (!str) + return 0; + + if (strcmp(str, "manual") == 0) + nmi_mode = NMI_MODE_MANUAL; + else if (strcmp(str, "aux") == 0) + nmi_mode = NMI_MODE_AUX; + else if (strcmp(str, "masked") == 0) + nmi_mode = NMI_MODE_MASKED; + else if (strcmp(str, "any") == 0) + nmi_mode = NMI_MODE_ANY; + else { + nmi_mode = NMI_MODE_UNKNOWN; + pr_warning("Unknown NMI mode %s\n", str); + } + + printk("Set NMI mode to %d\n", nmi_mode); + return 0; +} +early_param("nmi_mode", nmi_mode_setup); + +void __init sdk7786_nmi_init(void) +{ + unsigned int source, mask, tmp; + + switch (nmi_mode) { + case NMI_MODE_MANUAL: + source = NMISR_MAN_NMI; + mask = NMIMR_MAN_NMIM; + break; + case NMI_MODE_AUX: + source = NMISR_AUX_NMI; + mask = NMIMR_AUX_NMIM; + break; + case NMI_MODE_ANY: + source = NMISR_MAN_NMI | NMISR_AUX_NMI; + mask = NMIMR_MAN_NMIM | NMIMR_AUX_NMIM; + break; + case NMI_MODE_MASKED: + case NMI_MODE_UNKNOWN: + default: + source = mask = 0; + break; + } + + /* Set the NMI source */ + tmp = fpga_read_reg(NMISR); + tmp &= ~NMISR_MASK; + tmp |= source; + fpga_write_reg(tmp, NMISR); + + /* And the IRQ masking */ + fpga_write_reg(NMIMR_MASK ^ mask, NMIMR); +} diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index f094ea2ee78..c29268bfd34 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -11,16 +11,21 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/i2c.h> #include <linux/irq.h> #include <linux/clk.h> +#include <linux/clkdev.h> #include <mach/fpga.h> #include <mach/irq.h> #include <asm/machvec.h> #include <asm/heartbeat.h> #include <asm/sizes.h> +#include <asm/clock.h> #include <asm/reboot.h> +#include <asm/smp-ops.h> static struct resource heartbeat_resource = { .start = 0x07fff8b0, @@ -35,6 +40,12 @@ static struct platform_device heartbeat_device = { .resource = &heartbeat_resource, }; +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -132,13 +143,52 @@ static int __init sdk7786_devices_setup(void) return sdk7786_i2c_setup(); } -__initcall(sdk7786_devices_setup); +device_initcall(sdk7786_devices_setup); static int sdk7786_mode_pins(void) { return fpga_read_reg(MODSWR); } +/* + * FPGA-driven PCIe clocks + * + * Historically these include the oscillator, clock B (slots 2/3/4) and + * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove + * everything under a single PCIe clocks enable bit that happens to map + * to the same bit position as the oscillator bit for earlier FPGA + * versions. + * + * Given that the legacy clocks have the side-effect of shutting the CPU + * off through the FPGA along with the PCI slots, we simply leave them in + * their initial state and don't bother registering them with the clock + * framework. + */ +static int sdk7786_pcie_clk_enable(struct clk *clk) +{ + fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR); + return 0; +} + +static void sdk7786_pcie_clk_disable(struct clk *clk) +{ + fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR); +} + +static struct sh_clk_ops sdk7786_pcie_clk_ops = { + .enable = sdk7786_pcie_clk_enable, + .disable = sdk7786_pcie_clk_disable, +}; + +static struct clk sdk7786_pcie_clk = { + .ops = &sdk7786_pcie_clk_ops, +}; + +static struct clk_lookup sdk7786_pcie_cl = { + .con_id = "pcie_plat_clk", + .clk = &sdk7786_pcie_clk, +}; + static int sdk7786_clk_init(void) { struct clk *clk; @@ -152,12 +202,23 @@ static int sdk7786_clk_init(void) return -EINVAL; clk = clk_get(NULL, "extal"); - if (!clk || IS_ERR(clk)) + if (IS_ERR(clk)) return PTR_ERR(clk); ret = clk_set_rate(clk, 33333333); clk_put(clk); - return ret; + /* + * Setup the FPGA clocks. + */ + ret = clk_register(&sdk7786_pcie_clk); + if (unlikely(ret)) { + pr_err("FPGA clock registration failed\n"); + return ret; + } + + clkdev_add(&sdk7786_pcie_cl); + + return 0; } static void sdk7786_restart(char *cmd) @@ -165,16 +226,35 @@ static void sdk7786_restart(char *cmd) fpga_write_reg(0xa5a5, SRSTR); } +static void sdk7786_power_off(void) +{ + fpga_write_reg(fpga_read_reg(PWRCR) | PWRCR_PDWNREQ, PWRCR); + + /* + * It can take up to 20us for the R8C to do its job, back off and + * wait a bit until we've been shut off. Even though newer FPGA + * versions don't set the ACK bit, the latency issue remains. + */ + while ((fpga_read_reg(PWRCR) & PWRCR_PDWNACK) == 0) + cpu_sleep(); +} + /* Initialize the board */ static void __init sdk7786_setup(char **cmdline_p) { pr_info("Renesas Technology Europe SDK7786 support:\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sdk7786_fpga_init(); + sdk7786_nmi_init(); pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf); machine_ops.restart = sdk7786_restart; + pm_power_off = sdk7786_power_off; + + register_smp_ops(&shx3_smp_ops); } /* diff --git a/arch/sh/boards/mach-sdk7786/sram.c b/arch/sh/boards/mach-sdk7786/sram.c new file mode 100644 index 00000000000..c81c3abbe01 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/sram.c @@ -0,0 +1,72 @@ +/* + * SDK7786 FPGA SRAM Support. + * + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/io.h> +#include <linux/string.h> +#include <mach/fpga.h> +#include <asm/sram.h> +#include <asm/sizes.h> + +static int __init fpga_sram_init(void) +{ + unsigned long phys; + unsigned int area; + void __iomem *vaddr; + int ret; + u16 data; + + /* Enable FPGA SRAM */ + data = fpga_read_reg(LCLASR); + data |= LCLASR_FRAMEN; + fpga_write_reg(data, LCLASR); + + /* + * FPGA_SEL determines the area mapping + */ + area = (data & LCLASR_FPGA_SEL_MASK) >> LCLASR_FPGA_SEL_SHIFT; + if (unlikely(area == LCLASR_AREA_MASK)) { + pr_err("FPGA memory unmapped.\n"); + return -ENXIO; + } + + /* + * The memory itself occupies a 2KiB range at the top of the area + * immediately below the system registers. + */ + phys = (area << 26) + SZ_64M - SZ_4K; + + /* + * The FPGA SRAM resides in translatable physical space, so set + * up a mapping prior to inserting it in to the pool. + */ + vaddr = ioremap(phys, SZ_2K); + if (unlikely(!vaddr)) { + pr_err("Failed remapping FPGA memory.\n"); + return -ENXIO; + } + + pr_info("Adding %dKiB of FPGA memory at 0x%08lx-0x%08lx " + "(area %d) to pool.\n", + SZ_2K >> 10, phys, phys + SZ_2K - 1, area); + + ret = gen_pool_add(sram_pool, (unsigned long)vaddr, SZ_2K, -1); + if (unlikely(ret < 0)) { + pr_err("Failed adding memory\n"); + iounmap(vaddr); + return ret; + } + + return 0; +} +postcore_initcall(fpga_sram_init); diff --git a/arch/sh/boards/mach-se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile index 63e7ed699f3..5c9eaa0535b 100644 --- a/arch/sh/boards/mach-se/7206/Makefile +++ b/arch/sh/boards/mach-se/7206/Makefile @@ -2,4 +2,4 @@ # Makefile for the 7206 SolutionEngine specific parts of the kernel # -obj-y := setup.o io.o irq.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c deleted file mode 100644 index adadc77532e..00000000000 --- a/arch/sh/boards/mach-se/7206/io.c +++ /dev/null @@ -1,104 +0,0 @@ -/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $ - * - * linux/arch/sh/boards/se/7206/io.c - * - * Copyright (C) 2006 Yoshinori Sato - * - * I/O routine for Hitachi 7206 SolutionEngine. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/io.h> -#include <mach-se/mach/se7206.h> - - -static inline void delay(void) -{ - __raw_readw(0x20000000); /* P2 ROM Area */ -} - -/* MS7750 requires special versions of in*, out* routines, since - PC-like io ports are located at upper half byte of 16-bit word which - can be accessed only with 16-bit wide. */ - -static inline volatile __u16 * -port2adr(unsigned int port) -{ - if (port >= 0x2000 && port < 0x2020) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - else if (port >= 0x300 && port < 0x310) - return (volatile __u16 *) (PA_SMSC + (port - 0x300)); - - return (volatile __u16 *)port; -} - -unsigned char se7206_inb(unsigned long port) -{ - return (*port2adr(port)) & 0xff; -} - -unsigned char se7206_inb_p(unsigned long port) -{ - unsigned long v; - - v = (*port2adr(port)) & 0xff; - delay(); - return v; -} - -unsigned short se7206_inw(unsigned long port) -{ - return *port2adr(port); -} - -void se7206_outb(unsigned char value, unsigned long port) -{ - *(port2adr(port)) = value; -} - -void se7206_outb_p(unsigned char value, unsigned long port) -{ - *(port2adr(port)) = value; - delay(); -} - -void se7206_outw(unsigned short value, unsigned long port) -{ - *port2adr(port) = value; -} - -void se7206_insb(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u8 *ap = addr; - - while (count--) - *ap++ = *p; -} - -void se7206_insw(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u16 *ap = addr; - while (count--) - *ap++ = *p; -} - -void se7206_outsb(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u8 *ap = addr; - - while (count--) - *p = *ap++; -} - -void se7206_outsw(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u16 *ap = addr; - while (count--) - *p = *ap++; -} diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index 8d82175d83a..0db058e709e 100644 --- a/arch/sh/boards/mach-se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -25,8 +25,9 @@ #define INTC_IPR01 0xfffe0818 #define INTC_ICR1 0xfffe0802 -static void disable_se7206_irq(unsigned int irq) +static void disable_se7206_irq(struct irq_data *data) { + unsigned int irq = data->irq; unsigned short val; unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq))); unsigned short msk0,msk1; @@ -55,8 +56,9 @@ static void disable_se7206_irq(unsigned int irq) __raw_writew(msk1, INTMSK1); } -static void enable_se7206_irq(unsigned int irq) +static void enable_se7206_irq(struct irq_data *data) { + unsigned int irq = data->irq; unsigned short val; unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq))); unsigned short msk0,msk1; @@ -86,13 +88,13 @@ static void enable_se7206_irq(unsigned int irq) __raw_writew(msk1, INTMSK1); } -static void eoi_se7206_irq(unsigned int irq) +static void eoi_se7206_irq(struct irq_data *data) { unsigned short sts0,sts1; - struct irq_desc *desc = irq_to_desc(irq); + unsigned int irq = data->irq; - if (!(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_se7206_irq(irq); + if (!irqd_irq_disabled(data) && !irqd_irq_inprogress(data)) + enable_se7206_irq(data); /* FPGA isr clear */ sts0 = __raw_readw(INTSTS0); sts1 = __raw_readw(INTSTS1); @@ -115,18 +117,17 @@ static void eoi_se7206_irq(unsigned int irq) static struct irq_chip se7206_irq_chip __read_mostly = { .name = "SE7206-FPGA", - .mask = disable_se7206_irq, - .unmask = enable_se7206_irq, - .mask_ack = disable_se7206_irq, - .eoi = eoi_se7206_irq, + .irq_mask = disable_se7206_irq, + .irq_unmask = enable_se7206_irq, + .irq_eoi = eoi_se7206_irq, }; static void make_se7206_irq(unsigned int irq) { disable_irq_nosync(irq); - set_irq_chip_and_handler_name(irq, &se7206_irq_chip, + irq_set_chip_and_handler_name(irq, &se7206_irq_chip, handle_level_irq, "level"); - disable_se7206_irq(irq); + disable_se7206_irq(irq_get_irq_data(irq)); } /* @@ -137,11 +138,13 @@ void __init init_se7206_IRQ(void) make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */ make_se7206_irq(IRQ1_IRQ); /* ATA */ make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ - __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ + + __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */ /* FPGA System register setup*/ __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */ __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */ + /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ __raw_writew(0x0001,INTSEL); } diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c index 8f5c65d43d1..68883ec9568 100644 --- a/arch/sh/boards/mach-se/7206/setup.c +++ b/arch/sh/boards/mach-se/7206/setup.c @@ -77,7 +77,12 @@ static int __init se7206_devices_setup(void) { return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices)); } -__initcall(se7206_devices_setup); +device_initcall(se7206_devices_setup); + +static int se7206_mode_pins(void) +{ + return MODE_PIN1 | MODE_PIN2; +} /* * The Machine Vector @@ -85,21 +90,6 @@ __initcall(se7206_devices_setup); static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", - .mv_nr_irqs = 256, - .mv_inb = se7206_inb, - .mv_inw = se7206_inw, - .mv_outb = se7206_outb, - .mv_outw = se7206_outw, - - .mv_inb_p = se7206_inb_p, - .mv_inw_p = se7206_inw, - .mv_outb_p = se7206_outb_p, - .mv_outw_p = se7206_outw, - - .mv_insb = se7206_insb, - .mv_insw = se7206_insw, - .mv_outsb = se7206_outsb, - .mv_outsw = se7206_outsw, - .mv_init_irq = init_se7206_IRQ, + .mv_mode_pins = se7206_mode_pins, }; diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index d4305c26e9f..7646bf0486c 100644 --- a/arch/sh/boards/mach-se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -1,55 +1,109 @@ /* - * linux/arch/sh/boards/se/7343/irq.c + * Hitachi UL SolutionEngine 7343 FPGA IRQ Support. * * Copyright (C) 2008 Yoshihiro Shimoda + * Copyright (C) 2012 Paul Mundt * - * Based on linux/arch/sh/boards/se/7722/irq.c + * Based on linux/arch/sh/boards/se/7343/irq.c * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#define DRV_NAME "SE7343-FPGA" +#define pr_fmt(fmt) DRV_NAME ": " fmt + +#define irq_reg_readl ioread16 +#define irq_reg_writel iowrite16 + #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/irqdomain.h> #include <linux/io.h> +#include <asm/sizes.h> #include <mach-se/mach/se7343.h> -unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, }; +#define PA_CPLD_BASE_ADDR 0x11400000 +#define PA_CPLD_ST_REG 0x08 /* CPLD Interrupt status register */ +#define PA_CPLD_IMSK_REG 0x0a /* CPLD Interrupt mask register */ -static void disable_se7343_irq(unsigned int irq) +static void __iomem *se7343_irq_regs; +struct irq_domain *se7343_irq_domain; + +static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) { - unsigned int bit = (unsigned int)get_irq_chip_data(irq); - __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); + struct irq_data *data = irq_get_irq_data(irq); + struct irq_chip *chip = irq_data_get_irq_chip(data); + unsigned long mask; + int bit; + + chip->irq_mask_ack(data); + + mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG); + + for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR) + generic_handle_irq(irq_linear_revmap(se7343_irq_domain, bit)); + + chip->irq_unmask(data); } -static void enable_se7343_irq(unsigned int irq) +static void __init se7343_domain_init(void) { - unsigned int bit = (unsigned int)get_irq_chip_data(irq); - __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); -} + int i; -static struct irq_chip se7343_irq_chip __read_mostly = { - .name = "SE7343-FPGA", - .mask = disable_se7343_irq, - .unmask = enable_se7343_irq, - .mask_ack = disable_se7343_irq, -}; + se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR, + &irq_domain_simple_ops, NULL); + if (unlikely(!se7343_irq_domain)) { + printk("Failed to get IRQ domain\n"); + return; + } -static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) + for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) { + int irq = irq_create_mapping(se7343_irq_domain, i); + + if (unlikely(irq == 0)) { + printk("Failed to allocate IRQ %d\n", i); + return; + } + } +} + +static void __init se7343_gc_init(void) { - unsigned short intv = __raw_readw(PA_CPLD_ST); - unsigned int ext_irq = 0; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + unsigned int irq_base; - intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; + irq_base = irq_linear_revmap(se7343_irq_domain, 0); - for (; intv; intv >>= 1, ext_irq++) { - if (!(intv & 1)) - continue; + gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs, + handle_level_irq); + if (unlikely(!gc)) + return; - generic_handle_irq(se7343_fpga_irq[ext_irq]); - } + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; + + ct->regs.mask = PA_CPLD_IMSK_REG; + + irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR), + IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); + + irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux); + irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + + irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux); + irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + + irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux); + irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW); + + irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux); + irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW); } /* @@ -57,30 +111,19 @@ static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) */ void __init init_7343se_IRQ(void) { - int i, irq; - - __raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */ - __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ - - for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) { - irq = create_irq(); - if (irq < 0) - return; - se7343_fpga_irq[i] = irq; + se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16); + if (unlikely(!se7343_irq_regs)) { + pr_err("Failed to remap CPLD\n"); + return; + } - set_irq_chip_and_handler_name(se7343_fpga_irq[i], - &se7343_irq_chip, - handle_level_irq, "level"); + /* + * All FPGA IRQs disabled by default + */ + iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG); - set_irq_chip_data(se7343_fpga_irq[i], (void *)i); - } + __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ - set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux); - set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux); - set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux); - set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux); - set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW); + se7343_domain_init(); + se7343_gc_init(); } diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c index d2370af56d7..8ce4f2a202a 100644 --- a/arch/sh/boards/mach-se/7343/setup.c +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -5,6 +5,7 @@ #include <linux/serial_reg.h> #include <linux/usb/isp116x.h> #include <linux/delay.h> +#include <linux/irqdomain.h> #include <asm/machvec.h> #include <mach-se/mach/se7343.h> #include <asm/heartbeat.h> @@ -145,11 +146,12 @@ static struct platform_device *sh7343se_platform_devices[] __initdata = { static int __init sh7343se_devices_setup(void) { /* Wire-up dynamic vectors */ - serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA]; - serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB]; - + serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain, + SE7343_FPGA_IRQ_UARTA); + serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain, + SE7343_FPGA_IRQ_UARTB); usb_resources[2].start = usb_resources[2].end = - se7343_fpga_irq[SE7343_FPGA_IRQ_USB]; + irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB); return platform_add_devices(sh7343se_platform_devices, ARRAY_SIZE(sh7343se_platform_devices)); diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile index 8e624b06d5e..43ea14feef5 100644 --- a/arch/sh/boards/mach-se/770x/Makefile +++ b/arch/sh/boards/mach-se/770x/Makefile @@ -2,4 +2,4 @@ # Makefile for the 770x SolutionEngine specific parts of the kernel # -obj-y := setup.o io.o irq.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c deleted file mode 100644 index 28833c8786e..00000000000 --- a/arch/sh/boards/mach-se/770x/io.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Copyright (C) 2000 Kazumoto Kojima - * - * I/O routine for Hitachi SolutionEngine. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/io.h> -#include <mach-se/mach/se.h> - -/* MS7750 requires special versions of in*, out* routines, since - PC-like io ports are located at upper half byte of 16-bit word which - can be accessed only with 16-bit wide. */ - -static inline volatile __u16 * -port2adr(unsigned int port) -{ - if (port & 0xff000000) - return ( volatile __u16 *) port; - if (port >= 0x2000) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - else if (port >= 0x1000) - return (volatile __u16 *) (PA_83902 + (port << 1)); - else - return (volatile __u16 *) (PA_SUPERIO + (port << 1)); -} - -static inline int -shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - -unsigned char se_inb(unsigned long port) -{ - if (shifted_port(port)) - return (*port2adr(port) >> 8); - else - return (*port2adr(port))&0xff; -} - -unsigned char se_inb_p(unsigned long port) -{ - unsigned long v; - - if (shifted_port(port)) - v = (*port2adr(port) >> 8); - else - v = (*port2adr(port))&0xff; - ctrl_delay(); - return v; -} - -unsigned short se_inw(unsigned long port) -{ - if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -unsigned int se_inl(unsigned long port) -{ - maybebadio(port); - return 0; -} - -void se_outb(unsigned char value, unsigned long port) -{ - if (shifted_port(port)) - *(port2adr(port)) = value << 8; - else - *(port2adr(port)) = value; -} - -void se_outb_p(unsigned char value, unsigned long port) -{ - if (shifted_port(port)) - *(port2adr(port)) = value << 8; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void se_outw(unsigned short value, unsigned long port) -{ - if (port >= 0x2000) - *port2adr(port) = value; - else - maybebadio(port); -} - -void se_outl(unsigned int value, unsigned long port) -{ - maybebadio(port); -} - -void se_insb(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u8 *ap = addr; - - if (shifted_port(port)) { - while (count--) - *ap++ = *p >> 8; - } else { - while (count--) - *ap++ = *p; - } -} - -void se_insw(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u16 *ap = addr; - while (count--) - *ap++ = *p; -} - -void se_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void se_outsb(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u8 *ap = addr; - - if (shifted_port(port)) { - while (count--) - *p = *ap++ << 8; - } else { - while (count--) - *p = *ap++; - } -} - -void se_outsw(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u16 *ap = addr; - - while (count--) - *p = *ap++; -} - -void se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c index 66d39d1b090..658326f44df 100644 --- a/arch/sh/boards/mach-se/770x/setup.c +++ b/arch/sh/boards/mach-se/770x/setup.c @@ -128,8 +128,8 @@ static struct resource sh_eth0_resources[] = { }; static struct platform_device sh_eth0_device = { - .name = "sh-eth", - .id = 0, + .name = "sh771x-ether", + .id = 0, .dev = { .platform_data = PHY_ID, }, @@ -151,8 +151,8 @@ static struct resource sh_eth1_resources[] = { }; static struct platform_device sh_eth1_device = { - .name = "sh-eth", - .id = 1, + .name = "sh771x-ether", + .id = 1, .dev = { .platform_data = PHY_ID, }, @@ -184,38 +184,5 @@ device_initcall(se_devices_setup); static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_setup = smsc_setup, -#if defined(CONFIG_CPU_SH4) - .mv_nr_irqs = 48, -#elif defined(CONFIG_CPU_SUBTYPE_SH7708) - .mv_nr_irqs = 32, -#elif defined(CONFIG_CPU_SUBTYPE_SH7709) - .mv_nr_irqs = 61, -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) - .mv_nr_irqs = 86, -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) - .mv_nr_irqs = 104, -#endif - - .mv_inb = se_inb, - .mv_inw = se_inw, - .mv_inl = se_inl, - .mv_outb = se_outb, - .mv_outw = se_outw, - .mv_outl = se_outl, - - .mv_inb_p = se_inb_p, - .mv_inw_p = se_inw, - .mv_inl_p = se_inl, - .mv_outb_p = se_outb_p, - .mv_outw_p = se_outw, - .mv_outl_p = se_outl, - - .mv_insb = se_insb, - .mv_insw = se_insw, - .mv_insl = se_insl, - .mv_outsb = se_outsb, - .mv_outsw = se_outsw, - .mv_outsl = se_outsl, - .mv_init_irq = init_se_IRQ, }; diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c index 7416ad7ee53..a0b3dba34eb 100644 --- a/arch/sh/boards/mach-se/7721/setup.c +++ b/arch/sh/boards/mach-se/7721/setup.c @@ -92,6 +92,5 @@ static void __init se7721_setup(char **cmdline_p) struct sh_machine_vector mv_se7721 __initmv = { .mv_name = "Solution Engine 7721", .mv_setup = se7721_setup, - .mv_nr_irqs = 109, .mv_init_irq = init_se7721_IRQ, }; diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c index 61605db04ee..f5e2af1bf04 100644 --- a/arch/sh/boards/mach-se/7722/irq.c +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -1,83 +1,122 @@ /* - * linux/arch/sh/boards/se/7722/irq.c + * Hitachi UL SolutionEngine 7722 FPGA IRQ Support. * * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * Hitachi UL SolutionEngine 7722 Support. + * Copyright (C) 2012 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#define DRV_NAME "SE7722-FPGA" +#define pr_fmt(fmt) DRV_NAME ": " fmt + +#define irq_reg_readl ioread16 +#define irq_reg_writel iowrite16 + #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/irq.h> -#include <asm/io.h> +#include <linux/irqdomain.h> +#include <linux/io.h> +#include <linux/err.h> +#include <asm/sizes.h> #include <mach-se/mach/se7722.h> -unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, }; +#define IRQ01_BASE_ADDR 0x11800000 +#define IRQ01_MODE_REG 0 +#define IRQ01_STS_REG 4 +#define IRQ01_MASK_REG 8 -static void disable_se7722_irq(unsigned int irq) -{ - unsigned int bit = (unsigned int)get_irq_chip_data(irq); - __raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK); -} +static void __iomem *se7722_irq_regs; +struct irq_domain *se7722_irq_domain; -static void enable_se7722_irq(unsigned int irq) +static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc) { - unsigned int bit = (unsigned int)get_irq_chip_data(irq); - __raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK); -} + struct irq_data *data = irq_get_irq_data(irq); + struct irq_chip *chip = irq_data_get_irq_chip(data); + unsigned long mask; + int bit; -static struct irq_chip se7722_irq_chip __read_mostly = { - .name = "SE7722-FPGA", - .mask = disable_se7722_irq, - .unmask = enable_se7722_irq, - .mask_ack = disable_se7722_irq, -}; + chip->irq_mask_ack(data); -static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc) + mask = ioread16(se7722_irq_regs + IRQ01_STS_REG); + + for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR) + generic_handle_irq(irq_linear_revmap(se7722_irq_domain, bit)); + + chip->irq_unmask(data); +} + +static void __init se7722_domain_init(void) { - unsigned short intv = __raw_readw(IRQ01_STS); - unsigned int ext_irq = 0; + int i; - intv &= (1 << SE7722_FPGA_IRQ_NR) - 1; + se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR, + &irq_domain_simple_ops, NULL); + if (unlikely(!se7722_irq_domain)) { + printk("Failed to get IRQ domain\n"); + return; + } - for (; intv; intv >>= 1, ext_irq++) { - if (!(intv & 1)) - continue; + for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) { + int irq = irq_create_mapping(se7722_irq_domain, i); - generic_handle_irq(se7722_fpga_irq[ext_irq]); + if (unlikely(irq == 0)) { + printk("Failed to allocate IRQ %d\n", i); + return; + } } } -/* - * Initialize IRQ setting - */ -void __init init_se7722_IRQ(void) +static void __init se7722_gc_init(void) { - int i, irq; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + unsigned int irq_base; - __raw_writew(0, IRQ01_MASK); /* disable all irqs */ - __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ + irq_base = irq_linear_revmap(se7722_irq_domain, 0); - for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) { - irq = create_irq(); - if (irq < 0) - return; - se7722_fpga_irq[i] = irq; + gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs, + handle_level_irq); + if (unlikely(!gc)) + return; + + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; + + ct->regs.mask = IRQ01_MASK_REG; + + irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR), + IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); - set_irq_chip_and_handler_name(se7722_fpga_irq[i], - &se7722_irq_chip, - handle_level_irq, "level"); + irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux); + irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_chip_data(se7722_fpga_irq[i], (void *)i); + irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux); + irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); +} + +/* + * Initialize FPGA IRQs + */ +void __init init_se7722_IRQ(void) +{ + se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16); + if (unlikely(!se7722_irq_regs)) { + printk("Failed to remap IRQ01 regs\n"); + return; } - set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux); - set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + /* + * All FPGA IRQs disabled by default + */ + iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG); + + __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ - set_irq_chained_handler(IRQ1_IRQ, se7722_irq_demux); - set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + se7722_domain_init(); + se7722_gc_init(); } diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c index 80a4e571b31..e04e2bc4698 100644 --- a/arch/sh/boards/mach-se/7722/setup.c +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -2,6 +2,7 @@ * linux/arch/sh/boards/se/7722/setup.c * * Copyright (C) 2007 Nobuhiro Iwamatsu + * Copyright (C) 2012 Paul Mundt * * Hitachi UL SolutionEngine 7722 Support. * @@ -15,7 +16,9 @@ #include <linux/ata_platform.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/irqdomain.h> #include <linux/smc91x.h> +#include <linux/sh_intc.h> #include <mach-se/mach/se7722.h> #include <mach-se/mach/mrshpc.h> #include <asm/machvec.h> @@ -114,7 +117,7 @@ static struct resource sh_keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -127,9 +130,6 @@ static struct platform_device sh_keysc_device = { .dev = { .platform_data = &sh_keysc_info, }, - .archdata = { - .hwblk_id = HWBLK_KEYSC, - }, }; static struct platform_device *se7722_devices[] __initdata = { @@ -145,10 +145,10 @@ static int __init se7722_devices_setup(void) /* Wire-up dynamic vectors */ cf_ide_resources[2].start = cf_ide_resources[2].end = - se7722_fpga_irq[SE7722_FPGA_IRQ_MRSHPC0]; + irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0); smc91x_eth_resources[1].start = smc91x_eth_resources[1].end = - se7722_fpga_irq[SE7722_FPGA_IRQ_SMC]; + irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC); return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices)); } diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c index 0942be2daef..5d1d3ec9a6c 100644 --- a/arch/sh/boards/mach-se/7724/irq.c +++ b/arch/sh/boards/mach-se/7724/irq.c @@ -17,8 +17,10 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/irq.h> -#include <asm/io.h> +#include <linux/export.h> +#include <linux/topology.h> +#include <linux/io.h> +#include <linux/err.h> #include <mach-se/mach/se7724.h> struct fpga_irq { @@ -68,25 +70,26 @@ static struct fpga_irq get_fpga_irq(unsigned int irq) return set; } -static void disable_se7724_irq(unsigned int irq) +static void disable_se7724_irq(struct irq_data *data) { + unsigned int irq = data->irq; struct fpga_irq set = get_fpga_irq(fpga2irq(irq)); unsigned int bit = irq - set.base; __raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr); } -static void enable_se7724_irq(unsigned int irq) +static void enable_se7724_irq(struct irq_data *data) { + unsigned int irq = data->irq; struct fpga_irq set = get_fpga_irq(fpga2irq(irq)); unsigned int bit = irq - set.base; __raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr); } static struct irq_chip se7724_irq_chip __read_mostly = { - .name = "SE7724-FPGA", - .mask = disable_se7724_irq, - .unmask = enable_se7724_irq, - .mask_ack = disable_se7724_irq, + .name = "SE7724-FPGA", + .irq_mask = disable_se7724_irq, + .irq_unmask = enable_se7724_irq, }; static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc) @@ -110,7 +113,7 @@ static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc) */ void __init init_se7724_IRQ(void) { - int i, nid = cpu_to_node(boot_cpu_data); + int irq_base, i; __raw_writew(0xffff, IRQ0_MR); /* mask all */ __raw_writew(0xffff, IRQ1_MR); /* mask all */ @@ -120,36 +123,23 @@ void __init init_se7724_IRQ(void) __raw_writew(0x0000, IRQ2_SR); /* clear irq */ __raw_writew(0x002a, IRQ_MODE); /* set irq type */ - for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) { - int irq, wanted; - - wanted = SE7724_FPGA_IRQ_BASE + i; - - irq = create_irq_nr(wanted, nid); - if (unlikely(irq == 0)) { - pr_err("%s: failed hooking irq %d for FPGA\n", - __func__, wanted); - return; - } - - if (unlikely(irq != wanted)) { - pr_err("%s: got irq %d but wanted %d, bailing.\n", - __func__, irq, wanted); - destroy_irq(irq); - return; - } + irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE, + SE7724_FPGA_IRQ_NR, numa_node_id()); + if (IS_ERR_VALUE(irq_base)) { + pr_err("%s: failed hooking irqs for FPGA\n", __func__); + return; + } - set_irq_chip_and_handler_name(irq, - &se7724_irq_chip, + for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) + irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip, handle_level_irq, "level"); - } - set_irq_chained_handler(IRQ0_IRQ, se7724_irq_demux); - set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux); + irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_chained_handler(IRQ1_IRQ, se7724_irq_demux); - set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + irq_set_chained_handler(IRQ1_IRQ, se7724_irq_demux); + irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_chained_handler(IRQ2_IRQ, se7724_irq_demux); - set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW); + irq_set_chained_handler(IRQ2_IRQ, se7724_irq_demux); + irq_set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW); } diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 66cdbc3c7af..1162bc6945a 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -14,19 +14,26 @@ #include <linux/device.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smc91x.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/usb/r8a66597.h> +#include <linux/sh_eth.h> +#include <linux/sh_intc.h> +#include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <sound/sh_fsi.h> +#include <sound/simple_card.h> #include <asm/io.h> #include <asm/heartbeat.h> -#include <asm/sh_eth.h> #include <asm/clock.h> #include <asm/suspend.h> #include <cpu/sh7724.h> @@ -52,6 +59,13 @@ * and change SW41 to use 720p */ +/* + * about sound + * + * This setup.c supports FSI slave mode. + * Please change J20, J21, J22 pin to 1-2 connection. + */ + /* Heartbeat */ static struct resource heartbeat_resource = { .start = PA_LED, @@ -136,22 +150,46 @@ static struct platform_device nor_flash_device = { }; /* LCDC */ +static const struct fb_videomode lcdc_720p_modes[] = { + { + .name = "LB070WV1", + .sync = 0, /* hsync and vsync are active low */ + .xres = 1280, + .yres = 720, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 40, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + }, +}; + +static const struct fb_videomode lcdc_vga_modes[] = { + { + .name = "LB070WV1", + .sync = 0, /* hsync and vsync are active low */ + .xres = 640, + .yres = 480, + .left_margin = 105, + .right_margin = 50, + .hsync_len = 96, + .upper_margin = 33, + .lower_margin = 10, + .vsync_len = 2, + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .clock_divider = 1, - .lcd_cfg = { - .name = "LB070WV1", - .sync = 0, /* hsync and vsync are active low */ - }, - .lcd_size_cfg = { /* 7.0 inch */ + .panel_cfg = { /* 7.0 inch */ .width = 152, .height = 91, }, - .board_cfg = { - }, } }; @@ -163,7 +201,7 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 106, + .start = evt2irq(0xf40), .flags = IORESOURCE_IRQ, }, }; @@ -175,9 +213,6 @@ static struct platform_device lcdc_device = { .dev = { .platform_data = &lcdc_info, }, - .archdata = { - .hwblk_id = HWBLK_LCDC, - }, }; /* CEU0 */ @@ -193,7 +228,7 @@ static struct resource ceu0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, + .start = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -209,9 +244,6 @@ static struct platform_device ceu0_device = { .dev = { .platform_data = &sh_mobile_ceu0_info, }, - .archdata = { - .hwblk_id = HWBLK_CEU0, - }, }; /* CEU1 */ @@ -227,7 +259,7 @@ static struct resource ceu1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 63, + .start = evt2irq(0x9e0), .flags = IORESOURCE_IRQ, }, [2] = { @@ -243,47 +275,10 @@ static struct platform_device ceu1_device = { .dev = { .platform_data = &sh_mobile_ceu1_info, }, - .archdata = { - .hwblk_id = HWBLK_CEU1, - }, }; /* FSI */ -/* - * FSI-A use external clock which came from ak464x. - * So, we should change parent of fsi - */ -#define FCLKACR 0xa4150008 -static void fsimck_init(struct clk *clk) -{ - u32 status = __raw_readl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - __raw_writel(status, clk->enable_reg); -} - -static struct clk_ops fsimck_clk_ops = { - .init = fsimck_init, -}; - -static struct clk fsimcka_clk = { - .name = "fsimcka_clk", - .id = -1, - .ops = &fsimck_clk_ops, - .enable_reg = (void __iomem *)FCLKACR, - .rate = 0, /* unknown */ -}; - -struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_BRS_INV | - SH_FSI_OUT_SLAVE_MODE | - SH_FSI_IN_SLAVE_MODE | - SH_FSI_OFMT(PCM) | - SH_FSI_IFMT(PCM), -}; - +/* change J20, J21, J22 pin to 1-2 connection to use slave mode */ static struct resource fsi_resources[] = { [0] = { .name = "FSI", @@ -292,7 +287,7 @@ static struct resource fsi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 108, + .start = evt2irq(0xf80), .flags = IORESOURCE_IRQ, }, }; @@ -302,11 +297,27 @@ static struct platform_device fsi_device = { .id = 0, .num_resources = ARRAY_SIZE(fsi_resources), .resource = fsi_resources, - .dev = { - .platform_data = &fsi_info, +}; + +static struct asoc_simple_card_info fsi_ak4642_info = { + .name = "AK4642", + .card = "FSIA-AK4642", + .codec = "ak4642-codec.0-0012", + .platform = "sh_fsi.0", + .daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM, + .cpu_dai = { + .name = "fsia-dai", + }, + .codec_dai = { + .name = "ak4642-hifi", + .sysclk = 11289600, }, - .archdata = { - .hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */ +}; + +static struct platform_device fsi_ak4642_device = { + .name = "asoc-simple-card", + .dev = { + .platform_data = &fsi_ak4642_info, }, }; @@ -333,7 +344,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -346,40 +357,35 @@ static struct platform_device keysc_device = { .dev = { .platform_data = &keysc_info, }, - .archdata = { - .hwblk_id = HWBLK_KEYSC, - }, }; /* SH Eth */ static struct resource sh_eth_resources[] = { [0] = { .start = SH_ETH_ADDR, - .end = SH_ETH_ADDR + 0x1FC, + .end = SH_ETH_ADDR + 0x1FC - 1, .flags = IORESOURCE_MEM, }, [1] = { - .start = 91, + .start = evt2irq(0xd60), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; -struct sh_eth_plat_data sh_eth_plat = { +static struct sh_eth_plat_data sh_eth_plat = { .phy = 0x1f, /* SMSC LAN8187 */ .edmac_endian = EDMAC_LITTLE_ENDIAN, + .phy_interface = PHY_INTERFACE_MODE_MII, }; static struct platform_device sh_eth_device = { - .name = "sh-eth", - .id = 0, + .name = "sh7724-ether", + .id = 0, .dev = { .platform_data = &sh_eth_plat, }, .num_resources = ARRAY_SIZE(sh_eth_resources), .resource = sh_eth_resources, - .archdata = { - .hwblk_id = HWBLK_ETHER, - }, }; static struct r8a66597_platdata sh7724_usb0_host_data = { @@ -393,8 +399,8 @@ static struct resource sh7724_usb0_host_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, - .end = 65, + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -409,9 +415,6 @@ static struct platform_device sh7724_usb0_host_device = { }, .num_resources = ARRAY_SIZE(sh7724_usb0_host_resources), .resource = sh7724_usb0_host_resources, - .archdata = { - .hwblk_id = HWBLK_USB0, - }, }; static struct r8a66597_platdata sh7724_usb1_gadget_data = { @@ -425,8 +428,8 @@ static struct resource sh7724_usb1_gadget_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 66, - .end = 66, + .start = evt2irq(0xa40), + .end = evt2irq(0xa40), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -443,26 +446,41 @@ static struct platform_device sh7724_usb1_gadget_device = { .resource = sh7724_usb1_gadget_resources, }; +/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + static struct resource sdhi0_cn7_resources[] = { [0] = { .name = "SDHI0", .start = 0x04ce0000, - .end = 0x04ce01ff, + .end = 0x04ce00ff, .flags = IORESOURCE_MEM, }, [1] = { - .start = 100, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; +static struct sh_mobile_sdhi_info sh7724_sdhi0_data = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_caps = MMC_CAP_SDIO_IRQ, +}; + static struct platform_device sdhi0_cn7_device = { .name = "sh_mobile_sdhi", .id = 0, .num_resources = ARRAY_SIZE(sdhi0_cn7_resources), .resource = sdhi0_cn7_resources, - .archdata = { - .hwblk_id = HWBLK_SDHI0, + .dev = { + .platform_data = &sh7724_sdhi0_data, }, }; @@ -470,22 +488,28 @@ static struct resource sdhi1_cn8_resources[] = { [0] = { .name = "SDHI1", .start = 0x04cf0000, - .end = 0x04cf01ff, + .end = 0x04cf00ff, .flags = IORESOURCE_MEM, }, [1] = { - .start = 23, + .start = evt2irq(0x4e0), .flags = IORESOURCE_IRQ, }, }; +static struct sh_mobile_sdhi_info sh7724_sdhi1_data = { + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, + .tmio_caps = MMC_CAP_SDIO_IRQ, +}; + static struct platform_device sdhi1_cn8_device = { .name = "sh_mobile_sdhi", .id = 1, .num_resources = ARRAY_SIZE(sdhi1_cn8_resources), .resource = sdhi1_cn8_resources, - .archdata = { - .hwblk_id = HWBLK_SDHI1, + .dev = { + .platform_data = &sh7724_sdhi1_data, }, }; @@ -498,7 +522,7 @@ static struct resource irda_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 20, + .start = evt2irq(0x480), .flags = IORESOURCE_IRQ, }, }; @@ -509,6 +533,48 @@ static struct platform_device irda_device = { .resource = irda_resources, }; +#include <media/ak881x.h> +#include <media/sh_vou.h> + +static struct ak881x_pdata ak881x_pdata = { + .flags = AK881X_IF_MODE_SLAVE, +}; + +static struct i2c_board_info ak8813 = { + /* With open J18 jumper address is 0x21 */ + I2C_BOARD_INFO("ak8813", 0x20), + .platform_data = &ak881x_pdata, +}; + +static struct sh_vou_pdata sh_vou_pdata = { + .bus_fmt = SH_VOU_BUS_8BIT, + .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW, + .board_info = &ak8813, + .i2c_adap = 0, +}; + +static struct resource sh_vou_resources[] = { + [0] = { + .start = 0xfe960000, + .end = 0xfe962043, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x8e0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device vou_device = { + .name = "sh-vou", + .id = -1, + .num_resources = ARRAY_SIZE(sh_vou_resources), + .resource = sh_vou_resources, + .dev = { + .platform_data = &sh_vou_pdata, + }, +}; + static struct platform_device *ms7724se_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, @@ -521,9 +587,11 @@ static struct platform_device *ms7724se_devices[] __initdata = { &sh7724_usb0_host_device, &sh7724_usb1_gadget_device, &fsi_device, + &fsi_ak4642_device, &sdhi0_cn7_device, &sdhi1_cn8_device, &irda_device, + &vou_device, }; /* I2C device */ @@ -538,6 +606,7 @@ static struct i2c_board_info i2c0_devices[] = { #define EEPROM_DATA 0xBA20600C #define EEPROM_STAT 0xBA206010 #define EEPROM_STRT 0xBA206014 + static int __init sh_eth_is_eeprom_ready(void) { int t = 10000; @@ -594,7 +663,6 @@ extern char ms7724se_sdram_enter_end; extern char ms7724se_sdram_leave_start; extern char ms7724se_sdram_leave_end; - static int __init arch_setup(void) { /* enable I2C device */ @@ -608,6 +676,7 @@ static int __init devices_setup(void) { u16 sw = __raw_readw(SW4140); /* select camera, monitor */ struct clk *clk; + u16 fpga_out; /* register board specific self-refresh code */ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF | @@ -616,15 +685,31 @@ static int __init devices_setup(void) &ms7724se_sdram_enter_end, &ms7724se_sdram_leave_start, &ms7724se_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Reset Release */ - __raw_writew(__raw_readw(FPGA_OUT) & - ~((1 << 1) | /* LAN */ - (1 << 6) | /* VIDEO DAC */ - (1 << 7) | /* AK4643 */ - (1 << 8) | /* IrDA */ - (1 << 12) | /* USB0 */ - (1 << 14)), /* RMII */ - FPGA_OUT); + fpga_out = __raw_readw(FPGA_OUT); + /* bit4: NTSC_PDN, bit5: NTSC_RESET */ + fpga_out &= ~((1 << 1) | /* LAN */ + (1 << 4) | /* AK8813 PDN */ + (1 << 5) | /* AK8813 RESET */ + (1 << 6) | /* VIDEO DAC */ + (1 << 7) | /* AK4643 */ + (1 << 8) | /* IrDA */ + (1 << 12) | /* USB0 */ + (1 << 14)); /* RMII */ + __raw_writew(fpga_out | (1 << 4), FPGA_OUT); + + udelay(10); + + /* AK8813 RESET */ + __raw_writew(fpga_out | (1 << 5), FPGA_OUT); + + udelay(10); + + __raw_writew(fpga_out, FPGA_OUT); /* turn on USB clocks, use external clock */ __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); @@ -744,35 +829,31 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_KEYOUT0, NULL); /* enable FSI */ - gpio_request(GPIO_FN_FSIMCKB, NULL); gpio_request(GPIO_FN_FSIMCKA, NULL); + gpio_request(GPIO_FN_FSIIASD, NULL); gpio_request(GPIO_FN_FSIOASD, NULL); gpio_request(GPIO_FN_FSIIABCK, NULL); gpio_request(GPIO_FN_FSIIALRCK, NULL); gpio_request(GPIO_FN_FSIOABCK, NULL); gpio_request(GPIO_FN_FSIOALRCK, NULL); gpio_request(GPIO_FN_CLKAUDIOAO, NULL); - gpio_request(GPIO_FN_FSIIBSD, NULL); - gpio_request(GPIO_FN_FSIOBSD, NULL); - gpio_request(GPIO_FN_FSIIBBCK, NULL); - gpio_request(GPIO_FN_FSIIBLRCK, NULL); - gpio_request(GPIO_FN_FSIOBBCK, NULL); - gpio_request(GPIO_FN_FSIOBLRCK, NULL); - gpio_request(GPIO_FN_CLKAUDIOBO, NULL); - gpio_request(GPIO_FN_FSIIASD, NULL); /* set SPU2 clock to 83.4 MHz */ clk = clk_get(NULL, "spu_clk"); - clk_set_rate(clk, clk_round_rate(clk, 83333333)); - clk_put(clk); + if (!IS_ERR(clk)) { + clk_set_rate(clk, clk_round_rate(clk, 83333333)); + clk_put(clk); + } /* change parent of FSI A */ clk = clk_get(NULL, "fsia_clk"); - clk_register(&fsimcka_clk); - clk_set_parent(clk, &fsimcka_clk); - clk_set_rate(clk, 11000); - clk_set_rate(&fsimcka_clk, 11000); - clk_put(clk); + if (!IS_ERR(clk)) { + /* 48kHz dummy clock was used to make sure 1/1 divide */ + clk_set_rate(&sh7724_fsimcka_clk, 48000); + clk_set_parent(clk, &sh7724_fsimcka_clk); + clk_set_rate(clk, 48000); + clk_put(clk); + } /* SDHI0 connected to cn7 */ gpio_request(GPIO_FN_SDHI0CD, NULL); @@ -822,24 +903,12 @@ static int __init devices_setup(void) if (sw & SW41_B) { /* 720p */ - lcdc_info.ch[0].lcd_cfg.xres = 1280; - lcdc_info.ch[0].lcd_cfg.yres = 720; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 40; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; + lcdc_info.ch[0].lcd_modes = lcdc_720p_modes; + lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_720p_modes); } else { /* VGA */ - lcdc_info.ch[0].lcd_cfg.xres = 640; - lcdc_info.ch[0].lcd_cfg.yres = 480; - lcdc_info.ch[0].lcd_cfg.left_margin = 105; - lcdc_info.ch[0].lcd_cfg.right_margin = 50; - lcdc_info.ch[0].lcd_cfg.hsync_len = 96; - lcdc_info.ch[0].lcd_cfg.upper_margin = 33; - lcdc_info.ch[0].lcd_cfg.lower_margin = 10; - lcdc_info.ch[0].lcd_cfg.vsync_len = 2; + lcdc_info.ch[0].lcd_modes = lcdc_vga_modes; + lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_vga_modes); } if (sw & SW41_A) { @@ -852,6 +921,20 @@ static int __init devices_setup(void) lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL; } + /* VOU */ + gpio_request(GPIO_FN_DV_D15, NULL); + gpio_request(GPIO_FN_DV_D14, NULL); + gpio_request(GPIO_FN_DV_D13, NULL); + gpio_request(GPIO_FN_DV_D12, NULL); + gpio_request(GPIO_FN_DV_D11, NULL); + gpio_request(GPIO_FN_DV_D10, NULL); + gpio_request(GPIO_FN_DV_D9, NULL); + gpio_request(GPIO_FN_DV_D8, NULL); + gpio_request(GPIO_FN_DV_CLKI, NULL); + gpio_request(GPIO_FN_DV_CLK, NULL); + gpio_request(GPIO_FN_DV_VSYNC, NULL); + gpio_request(GPIO_FN_DV_HSYNC, NULL); + return platform_add_devices(ms7724se_devices, ARRAY_SIZE(ms7724se_devices)); } @@ -860,5 +943,4 @@ device_initcall(devices_setup); static struct sh_machine_vector mv_ms7724se __initmv = { .mv_name = "ms7724se", .mv_init_irq = init_se7724_IRQ, - .mv_nr_irqs = SE7724_FPGA_IRQ_BASE + SE7724_FPGA_IRQ_NR, }; diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile index e6f4341bfe6..a338fd9d503 100644 --- a/arch/sh/boards/mach-se/7751/Makefile +++ b/arch/sh/boards/mach-se/7751/Makefile @@ -2,4 +2,4 @@ # Makefile for the 7751 SolutionEngine specific parts of the kernel # -obj-y := setup.o io.o irq.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c deleted file mode 100644 index 6e75bd4459e..00000000000 --- a/arch/sh/boards/mach-se/7751/io.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Hitachi 7751 SolutionEngine. - * - * Initial version only to support LAN access; some - * placeholder code from io_se.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <asm/io.h> -#include <mach-se/mach/se7751.h> -#include <asm/addrspace.h> - -static inline volatile u16 *port2adr(unsigned int port) -{ - if (port >= 0x2000) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - maybebadio((unsigned long)port); - return (volatile __u16*)port; -} - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char sh7751se_inb(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned char *)port; - else - return (*port2adr(port)) & 0xff; -} - -unsigned char sh7751se_inb_p(unsigned long port) -{ - unsigned char v; - - if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else - v = (*port2adr(port)) & 0xff; - ctrl_delay(); - return v; -} - -unsigned short sh7751se_inw(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -unsigned int sh7751se_inl(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -void sh7751se_outb(unsigned char value, unsigned long port) -{ - - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else - *(port2adr(port)) = value; -} - -void sh7751se_outb_p(unsigned char value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void sh7751se_outw(unsigned short value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (port >= 0x2000) - *port2adr(port) = value; - else - maybebadio(port); -} - -void sh7751se_outl(unsigned int value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else - maybebadio(port); -} - -void sh7751se_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c index 50572512e3e..820f4e7ba0d 100644 --- a/arch/sh/boards/mach-se/7751/setup.c +++ b/arch/sh/boards/mach-se/7751/setup.c @@ -48,31 +48,12 @@ static int __init se7751_devices_setup(void) { return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices)); } -__initcall(se7751_devices_setup); +device_initcall(se7751_devices_setup); /* * The Machine Vector */ static struct sh_machine_vector mv_7751se __initmv = { .mv_name = "7751 SolutionEngine", - .mv_nr_irqs = 72, - - .mv_inb = sh7751se_inb, - .mv_inw = sh7751se_inw, - .mv_inl = sh7751se_inl, - .mv_outb = sh7751se_outb, - .mv_outw = sh7751se_outw, - .mv_outl = sh7751se_outl, - - .mv_inb_p = sh7751se_inb_p, - .mv_inw_p = sh7751se_inw, - .mv_inl_p = sh7751se_inl, - .mv_outb_p = sh7751se_outb_p, - .mv_outw_p = sh7751se_outw, - .mv_outl_p = sh7751se_outl, - - .mv_insl = sh7751se_insl, - .mv_outsl = sh7751se_outsl, - .mv_init_irq = init_7751se_IRQ, }; diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c index 6f7c207138e..ae5a1d84fdf 100644 --- a/arch/sh/boards/mach-se/7780/setup.c +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -110,6 +110,5 @@ static void __init se7780_setup(char **cmdline_p) static struct sh_machine_vector mv_se7780 __initmv = { .mv_name = "Solution Engine 7780" , .mv_setup = se7780_setup , - .mv_nr_irqs = 111 , .mv_init_irq = init_se7780_IRQ, }; diff --git a/arch/sh/boards/mach-se/board-se7619.c b/arch/sh/boards/mach-se/board-se7619.c index 1d0ef7faa10..958bcd7aacc 100644 --- a/arch/sh/boards/mach-se/board-se7619.c +++ b/arch/sh/boards/mach-se/board-se7619.c @@ -11,11 +11,16 @@ #include <asm/io.h> #include <asm/machvec.h> +static int se7619_mode_pins(void) +{ + return MODE_PIN2 | MODE_PIN0; +} + /* * The Machine Vector */ static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", - .mv_nr_irqs = 108, + .mv_mode_pins = se7619_mode_pins, }; diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c index 1b200990500..f83ac7995d0 100644 --- a/arch/sh/boards/mach-sh03/rtc.c +++ b/arch/sh/boards/mach-sh03/rtc.c @@ -108,7 +108,7 @@ static int set_rtc_mmss(unsigned long nowtime) __raw_writeb(real_minutes % 10, RTC_MIN1); __raw_writeb(real_minutes / 10, RTC_MIN10); } else { - printk(KERN_WARNING + printk_once(KERN_NOTICE "set_rtc_mmss: can't update from %d to %d\n", cmos_minutes, real_minutes); retval = -1; diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c index af4a0c012a9..f582dab5934 100644 --- a/arch/sh/boards/mach-sh03/setup.c +++ b/arch/sh/boards/mach-sh03/setup.c @@ -96,11 +96,10 @@ static int __init sh03_devices_setup(void) return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices)); } -__initcall(sh03_devices_setup); +device_initcall(sh03_devices_setup); static struct sh_machine_vector mv_sh03 __initmv = { .mv_name = "Interface (CTP/PCI-SH03)", .mv_setup = sh03_setup, - .mv_nr_irqs = 48, .mv_init_irq = init_sh03_IRQ, }; diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c index f64a6918224..2c8fb04685d 100644 --- a/arch/sh/boards/mach-sh7763rdp/setup.c +++ b/arch/sh/boards/mach-sh7763rdp/setup.c @@ -17,8 +17,9 @@ #include <linux/mtd/physmap.h> #include <linux/fb.h> #include <linux/io.h> +#include <linux/sh_eth.h> +#include <linux/sh_intc.h> #include <mach/sh7763rdp.h> -#include <asm/sh_eth.h> #include <asm/sh7760fb.h> /* NOR Flash */ @@ -67,7 +68,7 @@ static struct platform_device sh7763rdp_nor_flash_device = { * SH-Ether * * SH Ether of SH7763 has multi IRQ handling. - * (57,58,59 -> 57) + * (0x920,0x940,0x960 -> 0x920) */ static struct resource sh_eth_resources[] = { { @@ -75,7 +76,11 @@ static struct resource sh_eth_resources[] = { .end = 0xFEE00F7C - 1, .flags = IORESOURCE_MEM, }, { - .start = 57, /* irq number */ + .start = 0xFEE01800, /* TSU */ + .end = 0xFEE01FFF, + .flags = IORESOURCE_MEM, + }, { + .start = evt2irq(0x920), /* irq number */ .flags = IORESOURCE_IRQ, }, }; @@ -83,10 +88,11 @@ static struct resource sh_eth_resources[] = { static struct sh_eth_plat_data sh7763_eth_pdata = { .phy = 1, .edmac_endian = EDMAC_LITTLE_ENDIAN, + .phy_interface = PHY_INTERFACE_MODE_MII, }; static struct platform_device sh7763rdp_eth_device = { - .name = "sh-eth", + .name = "sh7763-gether", .resource = sh_eth_resources, .num_resources = ARRAY_SIZE(sh_eth_resources), .dev = { @@ -207,6 +213,5 @@ static void __init sh7763rdp_setup(char **cmdline_p) static struct sh_machine_vector mv_sh7763rdp __initmv = { .mv_name = "sh7763drp", .mv_setup = sh7763rdp_setup, - .mv_nr_irqs = 112, .mv_init_irq = init_sh7763rdp_IRQ, }; diff --git a/arch/sh/boards/mach-snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile deleted file mode 100644 index d2d2f4b6a50..00000000000 --- a/arch/sh/boards/mach-snapgear/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the SnapGear specific parts of the kernel -# - -obj-y := setup.o io.o diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c deleted file mode 100644 index 476650e42db..00000000000 --- a/arch/sh/boards/mach-snapgear/io.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) 2002 David McCullough <davidm@snapgear.com> - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Hitachi 7751 SolutionEngine. - * - * Initial version only to support LAN access; some - * placeholder code from io_se.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <asm/io.h> -#include <asm/addrspace.h> - -#ifdef CONFIG_SH_SECUREEDGE5410 -unsigned short secureedge5410_ioport; -#endif - -static inline volatile __u16 *port2adr(unsigned int port) -{ - maybebadio((unsigned long)port); - return (volatile __u16*)port; -} - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char snapgear_inb(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned char *)port; - else - return (*port2adr(port)) & 0xff; -} - -unsigned char snapgear_inb_p(unsigned long port) -{ - unsigned char v; - - if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else - v = (*port2adr(port))&0xff; - ctrl_delay(); - return v; -} - -unsigned short snapgear_inw(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -unsigned int snapgear_inl(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -void snapgear_outb(unsigned char value, unsigned long port) -{ - - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else - *(port2adr(port)) = value; -} - -void snapgear_outb_p(unsigned char value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void snapgear_outw(unsigned short value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (port >= 0x2000) - *port2adr(port) = value; - else - maybebadio(port); -} - -void snapgear_outl(unsigned int value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else - maybebadio(port); -} - -void snapgear_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void snapgear_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/mach-systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile deleted file mode 100644 index 2cc6a23d9d3..00000000000 --- a/arch/sh/boards/mach-systemh/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Makefile for the SystemH specific parts of the kernel -# - -obj-y := setup.o irq.o io.o - -# XXX: This wants to be consolidated in arch/sh/drivers/pci, and more -# importantly, with the generic sh7751_pcic_init() code. For now, we'll -# just abuse the hell out of kbuild, because we can.. - -obj-$(CONFIG_PCI) += pci.o -pci-y := ../../se/7751/pci.o - diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c deleted file mode 100644 index 15577ff1f71..00000000000 --- a/arch/sh/boards/mach-systemh/io.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/systemh/io.c - * - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Hitachi 7751 Systemh. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <mach/systemh7751.h> -#include <asm/addrspace.h> -#include <asm/io.h> - -#define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area - of smc lan chip*/ -static inline volatile __u16 * -port2adr(unsigned int port) -{ - if (port >= 0x2000) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - maybebadio((unsigned long)port); - return (volatile __u16*)port; -} - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char sh7751systemh_inb(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned char *)port; - else if (port <= 0x3F1) - return *(volatile unsigned char *)ETHER_IOMAP(port); - else - return (*port2adr(port))&0xff; -} - -unsigned char sh7751systemh_inb_p(unsigned long port) -{ - unsigned char v; - - if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else if (port <= 0x3F1) - v = *(volatile unsigned char *)ETHER_IOMAP(port); - else - v = (*port2adr(port))&0xff; - ctrl_delay(); - return v; -} - -unsigned short sh7751systemh_inw(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (port >= 0x2000) - return *port2adr(port); - else if (port <= 0x3F1) - return *(volatile unsigned int *)ETHER_IOMAP(port); - else - maybebadio(port); - return 0; -} - -unsigned int sh7751systemh_inl(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (port >= 0x2000) - return *port2adr(port); - else if (port <= 0x3F1) - return *(volatile unsigned int *)ETHER_IOMAP(port); - else - maybebadio(port); - return 0; -} - -void sh7751systemh_outb(unsigned char value, unsigned long port) -{ - - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (port <= 0x3F1) - *(volatile unsigned char *)ETHER_IOMAP(port) = value; - else - *(port2adr(port)) = value; -} - -void sh7751systemh_outb_p(unsigned char value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (port <= 0x3F1) - *(volatile unsigned char *)ETHER_IOMAP(port) = value; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void sh7751systemh_outw(unsigned short value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (port >= 0x2000) - *port2adr(port) = value; - else if (port <= 0x3F1) - *(volatile unsigned short *)ETHER_IOMAP(port) = value; - else - maybebadio(port); -} - -void sh7751systemh_outl(unsigned int value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else - maybebadio(port); -} - -void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned char *p = addr; - while (count--) *p++ = sh7751systemh_inb(port); -} - -void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count) -{ - unsigned short *p = addr; - while (count--) *p++ = sh7751systemh_inw(port); -} - -void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned char *p = (unsigned char*)addr; - while (count--) sh7751systemh_outb(*p++, port); -} - -void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long count) -{ - unsigned short *p = (unsigned short*)addr; - while (count--) sh7751systemh_outw(*p++, port); -} - -void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c deleted file mode 100644 index 523aea5dc94..00000000000 --- a/arch/sh/boards/mach-systemh/irq.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/systemh/irq.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SystemH Support. - * - * Modified for 7751 SystemH by - * Jonathan Short. - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <mach/systemh7751.h> -#include <asm/smc37c93x.h> - -/* address of external interrupt mask register - * address must be set prior to use these (maybe in init_XXX_irq()) - * XXX : is it better to use .config than specifying it in code? */ -static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004; -static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000; - -/* forward declaration */ -static void enable_systemh_irq(unsigned int irq); -static void disable_systemh_irq(unsigned int irq); -static void mask_and_ack_systemh(unsigned int); - -static struct irq_chip systemh_irq_type = { - .name = " SystemH Register", - .unmask = enable_systemh_irq, - .mask = disable_systemh_irq, - .ack = mask_and_ack_systemh, -}; - -static void disable_systemh_irq(unsigned int irq) -{ - if (systemh_irq_mask_register) { - unsigned long val, mask = 0x01 << 1; - - /* Clear the "irq"th bit in the mask and set it in the request */ - val = __raw_readl((unsigned long)systemh_irq_mask_register); - val &= ~mask; - __raw_writel(val, (unsigned long)systemh_irq_mask_register); - - val = __raw_readl((unsigned long)systemh_irq_request_register); - val |= mask; - __raw_writel(val, (unsigned long)systemh_irq_request_register); - } -} - -static void enable_systemh_irq(unsigned int irq) -{ - if (systemh_irq_mask_register) { - unsigned long val, mask = 0x01 << 1; - - /* Set "irq"th bit in the mask register */ - val = __raw_readl((unsigned long)systemh_irq_mask_register); - val |= mask; - __raw_writel(val, (unsigned long)systemh_irq_mask_register); - } -} - -static void mask_and_ack_systemh(unsigned int irq) -{ - disable_systemh_irq(irq); -} - -void make_systemh_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - set_irq_chip_and_handler(irq, &systemh_irq_type, handle_level_irq); - disable_systemh_irq(irq); -} diff --git a/arch/sh/boards/mach-systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c deleted file mode 100644 index 219fd800a43..00000000000 --- a/arch/sh/boards/mach-systemh/setup.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/systemh/setup.c - * - * Copyright (C) 2000 Kazumoto Kojima - * Copyright (C) 2003 Paul Mundt - * - * Hitachi SystemH Support. - * - * Modified for 7751 SystemH by Jonathan Short. - * - * Rewritten for 2.6 by Paul Mundt. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <asm/machvec.h> -#include <mach/systemh7751.h> - -extern void make_systemh_irq(unsigned int irq); - -/* - * Initialize IRQ setting - */ -static void __init sh7751systemh_init_irq(void) -{ - make_systemh_irq(0xb); /* Ethernet interrupt */ -} - -static struct sh_machine_vector mv_7751systemh __initmv = { - .mv_name = "7751 SystemH", - .mv_nr_irqs = 72, - - .mv_inb = sh7751systemh_inb, - .mv_inw = sh7751systemh_inw, - .mv_inl = sh7751systemh_inl, - .mv_outb = sh7751systemh_outb, - .mv_outw = sh7751systemh_outw, - .mv_outl = sh7751systemh_outl, - - .mv_inb_p = sh7751systemh_inb_p, - .mv_inw_p = sh7751systemh_inw, - .mv_inl_p = sh7751systemh_inl, - .mv_outb_p = sh7751systemh_outb_p, - .mv_outw_p = sh7751systemh_outw, - .mv_outl_p = sh7751systemh_outl, - - .mv_insb = sh7751systemh_insb, - .mv_insw = sh7751systemh_insw, - .mv_insl = sh7751systemh_insl, - .mv_outsb = sh7751systemh_outsb, - .mv_outsw = sh7751systemh_outsw, - .mv_outsl = sh7751systemh_outsl, - - .mv_init_irq = sh7751systemh_init_irq, -}; diff --git a/arch/sh/boards/mach-x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile index 983e4551fec..0cbe3d02dea 100644 --- a/arch/sh/boards/mach-x3proto/Makefile +++ b/arch/sh/boards/mach-x3proto/Makefile @@ -1 +1,3 @@ obj-y += setup.o ilsel.o + +obj-$(CONFIG_GPIOLIB) += gpio.o diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c new file mode 100644 index 00000000000..3ea65e9b56e --- /dev/null +++ b/arch/sh/boards/mach-x3proto/gpio.c @@ -0,0 +1,141 @@ +/* + * arch/sh/boards/mach-x3proto/gpio.c + * + * Renesas SH-X3 Prototype Baseboard GPIO Support. + * + * Copyright (C) 2010 - 2012 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/irqdomain.h> +#include <linux/io.h> +#include <mach/ilsel.h> +#include <mach/hardware.h> + +#define KEYCTLR 0xb81c0000 +#define KEYOUTR 0xb81c0002 +#define KEYDETR 0xb81c0004 + +static DEFINE_SPINLOCK(x3proto_gpio_lock); +static struct irq_domain *x3proto_irq_domain; + +static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + unsigned long flags; + unsigned int data; + + spin_lock_irqsave(&x3proto_gpio_lock, flags); + data = __raw_readw(KEYCTLR); + data |= (1 << gpio); + __raw_writew(data, KEYCTLR); + spin_unlock_irqrestore(&x3proto_gpio_lock, flags); + + return 0; +} + +static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio) +{ + return !!(__raw_readw(KEYDETR) & (1 << gpio)); +} + +static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) +{ + int virq; + + if (gpio < chip->ngpio) + virq = irq_create_mapping(x3proto_irq_domain, gpio); + else + virq = -ENXIO; + + return virq; +} + +static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + struct irq_data *data = irq_get_irq_data(irq); + struct irq_chip *chip = irq_data_get_irq_chip(data); + unsigned long mask; + int pin; + + chip->irq_mask_ack(data); + + mask = __raw_readw(KEYDETR); + for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS) + generic_handle_irq(irq_linear_revmap(x3proto_irq_domain, pin)); + + chip->irq_unmask(data); +} + +struct gpio_chip x3proto_gpio_chip = { + .label = "x3proto-gpio", + .direction_input = x3proto_gpio_direction_input, + .get = x3proto_gpio_get, + .to_irq = x3proto_gpio_to_irq, + .base = -1, + .ngpio = NR_BASEBOARD_GPIOS, +}; + +static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq, + "gpio"); + + return 0; +} + +static struct irq_domain_ops x3proto_gpio_irq_ops = { + .map = x3proto_gpio_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + +int __init x3proto_gpio_setup(void) +{ + int ilsel, ret; + + ilsel = ilsel_enable(ILSEL_KEY); + if (unlikely(ilsel < 0)) + return ilsel; + + ret = gpiochip_add(&x3proto_gpio_chip); + if (unlikely(ret)) + goto err_gpio; + + x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS, + &x3proto_gpio_irq_ops, NULL); + if (unlikely(!x3proto_irq_domain)) + goto err_irq; + + pr_info("registering '%s' support, handling GPIOs %u -> %u, " + "bound to IRQ %u\n", + x3proto_gpio_chip.label, x3proto_gpio_chip.base, + x3proto_gpio_chip.base + x3proto_gpio_chip.ngpio, + ilsel); + + irq_set_chained_handler(ilsel, x3proto_gpio_irq_handler); + irq_set_irq_wake(ilsel, 1); + + return 0; + +err_irq: + ret = gpiochip_remove(&x3proto_gpio_chip); + if (unlikely(ret)) + pr_err("Failed deregistering GPIO\n"); + +err_gpio: + synchronize_irq(ilsel); + + ilsel_disable(ILSEL_KEY); + + return ret; +} diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c index 5c9842704c6..95e34613951 100644 --- a/arch/sh/boards/mach-x3proto/ilsel.c +++ b/arch/sh/boards/mach-x3proto/ilsel.c @@ -1,20 +1,22 @@ /* - * arch/sh/boards/renesas/x3proto/ilsel.c + * arch/sh/boards/mach-x3proto/ilsel.c * * Helper routines for SH-X3 proto board ILSEL. * - * Copyright (C) 2007 Paul Mundt + * Copyright (C) 2007 - 2010 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/bitmap.h> #include <linux/io.h> -#include <asm/ilsel.h> +#include <mach/ilsel.h> /* * ILSEL is split across: @@ -64,6 +66,8 @@ static void __ilsel_enable(ilsel_source_t set, unsigned int bit) unsigned int tmp, shift; unsigned long addr; + pr_notice("enabling ILSEL set %d\n", set); + addr = mk_ilsel_addr(bit); shift = mk_ilsel_shift(bit); @@ -92,8 +96,10 @@ int ilsel_enable(ilsel_source_t set) { unsigned int bit; - /* Aliased sources must use ilsel_enable_fixed() */ - BUG_ON(set > ILSEL_KEY); + if (unlikely(set > ILSEL_KEY)) { + pr_err("Aliased sources must use ilsel_enable_fixed()\n"); + return -EINVAL; + } do { bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS); @@ -140,6 +146,8 @@ void ilsel_disable(unsigned int irq) unsigned long addr; unsigned int tmp; + pr_notice("disabling ILSEL set %d\n", irq); + addr = mk_ilsel_addr(irq); tmp = __raw_readw(addr); diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c index e284592fd42..d682e2b6a85 100644 --- a/arch/sh/boards/mach-x3proto/setup.c +++ b/arch/sh/boards/mach-x3proto/setup.c @@ -1,9 +1,9 @@ /* - * arch/sh/boards/renesas/x3proto/setup.c + * arch/sh/boards/mach-x3proto/setup.c * * Renesas SH-X3 Prototype Board Support. * - * Copyright (C) 2007 - 2008 Paul Mundt + * Copyright (C) 2007 - 2010 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -16,9 +16,14 @@ #include <linux/smc91x.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/input.h> #include <linux/usb/r8a66597.h> #include <linux/usb/m66592.h> -#include <asm/ilsel.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <mach/ilsel.h> +#include <mach/hardware.h> +#include <asm/smp-ops.h> static struct resource heartbeat_resources[] = { [0] = { @@ -121,15 +126,128 @@ static struct platform_device m66592_usb_peripheral_device = { .resource = m66592_usb_peripheral_resources, }; +static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = { + { + .desc = "key44", + .code = KEY_POWER, + .active_low = 1, + .wakeup = 1, + }, { + .desc = "key43", + .code = KEY_SUSPEND, + .active_low = 1, + .wakeup = 1, + }, { + .desc = "key42", + .code = KEY_KATAKANAHIRAGANA, + .active_low = 1, + }, { + .desc = "key41", + .code = KEY_SWITCHVIDEOMODE, + .active_low = 1, + }, { + .desc = "key34", + .code = KEY_F12, + .active_low = 1, + }, { + .desc = "key33", + .code = KEY_F11, + .active_low = 1, + }, { + .desc = "key32", + .code = KEY_F10, + .active_low = 1, + }, { + .desc = "key31", + .code = KEY_F9, + .active_low = 1, + }, { + .desc = "key24", + .code = KEY_F8, + .active_low = 1, + }, { + .desc = "key23", + .code = KEY_F7, + .active_low = 1, + }, { + .desc = "key22", + .code = KEY_F6, + .active_low = 1, + }, { + .desc = "key21", + .code = KEY_F5, + .active_low = 1, + }, { + .desc = "key14", + .code = KEY_F4, + .active_low = 1, + }, { + .desc = "key13", + .code = KEY_F3, + .active_low = 1, + }, { + .desc = "key12", + .code = KEY_F2, + .active_low = 1, + }, { + .desc = "key11", + .code = KEY_F1, + .active_low = 1, + }, +}; + +static struct gpio_keys_platform_data baseboard_buttons_data = { + .buttons = baseboard_buttons, + .nbuttons = ARRAY_SIZE(baseboard_buttons), +}; + +static struct platform_device baseboard_buttons_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &baseboard_buttons_data, + }, +}; + static struct platform_device *x3proto_devices[] __initdata = { &heartbeat_device, &smc91x_device, &r8a66597_usb_host_device, &m66592_usb_peripheral_device, + &baseboard_buttons_device, }; +static void __init x3proto_init_irq(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRL3210); + + /* Set ICR0.LVLMODE */ + __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000); +} + static int __init x3proto_devices_setup(void) { + int ret, i; + + /* + * IRLs are only needed for ILSEL mappings, so flip over the INTC + * pins at a later point to enable the GPIOs to settle. + */ + x3proto_init_irq(); + + /* + * Now that ILSELs are available, set up the baseboard GPIOs. + */ + ret = x3proto_gpio_setup(); + if (unlikely(ret)) + return ret; + + /* + * Propagate dynamic GPIOs for the baseboard button device. + */ + for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++) + baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i; + r8a66597_usb_host_resources[1].start = r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I); @@ -144,15 +262,12 @@ static int __init x3proto_devices_setup(void) } device_initcall(x3proto_devices_setup); -static void __init x3proto_init_irq(void) +static void __init x3proto_setup(char **cmdline_p) { - plat_irq_setup_pins(IRQ_MODE_IRL3210); - - /* Set ICR0.LVLMODE */ - __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000); + register_smp_ops(&shx3_smp_ops); } static struct sh_machine_vector mv_x3proto __initmv = { .mv_name = "x3proto", - .mv_init_irq = x3proto_init_irq, + .mv_setup = x3proto_setup, }; |