1 files changed, 0 insertions, 135 deletions
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
deleted file mode 100644
index 84271d85a8d..00000000000
--- a/arch/sh/boards/snapgear/setup.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * linux/arch/sh/boards/snapgear/setup.c
- *
- * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
- * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
- *
- * Based on files with the following comments:
- *
- *           Copyright (C) 2000  Kazumoto Kojima
- *
- *           Modified for 7751 Solution Engine by
- *           Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <asm/machvec.h>
-#include <asm/snapgear.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-#include <asm/cpu/timer.h>
-
-extern void secureedge5410_rtc_init(void);
-extern void pcibios_init(void);
-
-/****************************************************************************/
-/*
- * EraseConfig handling functions
- */
-
-static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
-{
-	volatile char dummy __attribute__((unused)) = * (volatile char *) 0xb8000000;
-
-	printk("SnapGear: erase switch interrupt!\n");
-
-	return IRQ_HANDLED;
-}
-
-static int __init eraseconfig_init(void)
-{
-	printk("SnapGear: EraseConfig init\n");
-	/* Setup "EraseConfig" switch on external IRQ 0 */
-	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
-				"Erase Config", NULL))
-		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
-				IRL0_IRQ);
-	else
-		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
-				IRL0_IRQ);
-	return(0);
-}
-
-module_init(eraseconfig_init);
-
-/****************************************************************************/
-/*
- * Initialize IRQ setting
- *
- * IRL0 = erase switch
- * IRL1 = eth0
- * IRL2 = eth1
- * IRL3 = crypto
- */
-
-static struct ipr_data ipr_irq_table[] = {
-	{ IRL0_IRQ, 0, IRL0_IPR_POS, IRL0_PRIORITY },
-	{ IRL1_IRQ, 0, IRL1_IPR_POS, IRL1_PRIORITY },
-	{ IRL2_IRQ, 0, IRL2_IPR_POS, IRL2_PRIORITY },
-	{ IRL3_IRQ, 0, IRL3_IPR_POS, IRL3_PRIORITY },
-};
-
-static unsigned long ipr_offsets[] = {
-	INTC_IPRD,
-};
-
-static struct ipr_desc ipr_irq_desc = {
-	.ipr_offsets	= ipr_offsets,
-	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
-
-	.ipr_data	= ipr_irq_table,
-	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
-
-	.chip = {
-		.name	= "IPR-snapgear",
-	},
-};
-
-static void __init init_snapgear_IRQ(void)
-{
-	/* enable individual interrupt mode for externals */
-	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
-
-	printk("Setup SnapGear IRQ/IPR ...\n");
-
-	register_ipr_controller(&ipr_irq_desc);
-}
-
-/*
- * Initialize the board
- */
-static void __init snapgear_setup(char **cmdline_p)
-{
-	board_time_init = secureedge5410_rtc_init;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_snapgear __initmv = {
-	.mv_name		= "SnapGear SecureEdge5410",
-	.mv_setup		= snapgear_setup,
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= snapgear_inb,
-	.mv_inw			= snapgear_inw,
-	.mv_inl			= snapgear_inl,
-	.mv_outb		= snapgear_outb,
-	.mv_outw		= snapgear_outw,
-	.mv_outl		= snapgear_outl,
-
-	.mv_inb_p		= snapgear_inb_p,
-	.mv_inw_p		= snapgear_inw,
-	.mv_inl_p		= snapgear_inl,
-	.mv_outb_p		= snapgear_outb_p,
-	.mv_outw_p		= snapgear_outw,
-	.mv_outl_p		= snapgear_outl,
-
-	.mv_init_irq		= init_snapgear_IRQ,
-};