aboutsummaryrefslogtreecommitdiff
path: root/arch/sh/boards/se
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/se')
-rw-r--r--arch/sh/boards/se/7300/Makefile7
-rw-r--r--arch/sh/boards/se/7300/io.c264
-rw-r--r--arch/sh/boards/se/7300/irq.c36
-rw-r--r--arch/sh/boards/se/7300/led.c68
-rw-r--r--arch/sh/boards/se/7300/setup.c65
-rw-r--r--arch/sh/boards/se/73180/Makefile7
-rw-r--r--arch/sh/boards/se/73180/io.c264
-rw-r--r--arch/sh/boards/se/73180/irq.c136
-rw-r--r--arch/sh/boards/se/73180/led.c66
-rw-r--r--arch/sh/boards/se/73180/setup.c67
-rw-r--r--arch/sh/boards/se/770x/Makefile6
-rw-r--r--arch/sh/boards/se/770x/io.c226
-rw-r--r--arch/sh/boards/se/770x/irq.c79
-rw-r--r--arch/sh/boards/se/770x/led.c67
-rw-r--r--arch/sh/boards/se/770x/mach.c67
-rw-r--r--arch/sh/boards/se/770x/setup.c84
-rw-r--r--arch/sh/boards/se/7751/Makefile8
-rw-r--r--arch/sh/boards/se/7751/io.c244
-rw-r--r--arch/sh/boards/se/7751/irq.c66
-rw-r--r--arch/sh/boards/se/7751/led.c67
-rw-r--r--arch/sh/boards/se/7751/mach.c54
-rw-r--r--arch/sh/boards/se/7751/pci.c147
-rw-r--r--arch/sh/boards/se/7751/setup.c227
23 files changed, 0 insertions, 2322 deletions
diff --git a/arch/sh/boards/se/7300/Makefile b/arch/sh/boards/se/7300/Makefile
deleted file mode 100644
index 0fbd4f47815..00000000000
--- a/arch/sh/boards/se/7300/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the 7300 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/se/7300/io.c b/arch/sh/boards/se/7300/io.c
deleted file mode 100644
index f449a94ddff..00000000000
--- a/arch/sh/boards/se/7300/io.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * arch/sh/boards/se/7300/io.c
- *
- * Copyright (C) 2003 YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
- * Based on arch/sh/kernel/io_shmse.c
- *
- * I/O routine for SH-Mobile3 73180 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <asm/mach/se7300.h>
-#include <asm/io.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
- unsigned long start, end;
- unsigned long base;
- struct iop *(*check) (struct iop * p, unsigned long port);
- unsigned char (*inb) (struct iop * p, unsigned long port);
- unsigned short (*inw) (struct iop * p, unsigned long port);
- void (*outb) (struct iop * p, unsigned char value, unsigned long port);
- void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
- if ((p->start <= port) && (port <= p->end))
- return p;
- else
- badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
- if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
- return p;
- return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
- return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
- return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- *(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
- *(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
- unsigned long v;
-
- if (port & 1)
- addr += 0x00400000;
- v = *(volatile unsigned char *) addr;
- return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
-
- if (port & 1)
- addr += 0x00400000;
- *(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
- badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- badio(inw, port);
-}
-
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
- .start = 0x300,
- .end = 0x30f,
- .base = 0xb4000000,
- .check = simple_check,
- .inb = simple_inb,
- .inw = simple_inw,
- .outb = simple_outb,
- .outw = simple_outw,
-};
-
-/* NE2000 pc card NIC */
-static struct iop neiop = {
- .start = 0x280,
- .end = 0x29f,
- .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */
- .check = simple_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-
-/* CF in CF slot */
-static struct iop cfiop = {
- .base = 0xb0600000,
- .check = ide_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
- if (0) ;
-#if defined(CONFIG_SMC91111)
- else if (laniop.check(&laniop, port))
- return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
- else if (neiop.check(&neiop, port))
- return &neiop;
-#endif
-#if defined(CONFIG_IDE)
- else if (cfiop.check(&cfiop, port))
- return &cfiop;
-#endif
- else
- return &neiop; /* fallback */
-}
-
-static inline void
-delay(void)
-{
- ctrl_inw(0xac000000);
- ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh7300se_inb(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inb) (p, port);
-}
-
-unsigned char
-sh7300se_inb_p(unsigned long port)
-{
- unsigned char v = sh7300se_inb(port);
- delay();
- return v;
-}
-
-unsigned short
-sh7300se_inw(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inw) (p, port);
-}
-
-unsigned int
-sh7300se_inl(unsigned long port)
-{
- badio(inl, port);
-}
-
-void
-sh7300se_outb(unsigned char value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outb) (p, value, port);
-}
-
-void
-sh7300se_outb_p(unsigned char value, unsigned long port)
-{
- sh7300se_outb(value, port);
- delay();
-}
-
-void
-sh7300se_outw(unsigned short value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outw) (p, value, port);
-}
-
-void
-sh7300se_outl(unsigned int value, unsigned long port)
-{
- badio(outl, port);
-}
-
-void
-sh7300se_insb(unsigned long port, void *addr, unsigned long count)
-{
- unsigned char *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inb) (p, port);
-}
-
-void
-sh7300se_insw(unsigned long port, void *addr, unsigned long count)
-{
- unsigned short *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inw) (p, port);
-}
-
-void
-sh7300se_insl(unsigned long port, void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void
-sh7300se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned char *a = (unsigned char *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outb) (p, *a++, port);
-}
-
-void
-sh7300se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned short *a = (unsigned short *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outw) (p, *a++, port);
-}
-
-void
-sh7300se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- badio(outsw, port);
-}
diff --git a/arch/sh/boards/se/7300/irq.c b/arch/sh/boards/se/7300/irq.c
deleted file mode 100644
index 216a78d1a10..00000000000
--- a/arch/sh/boards/se/7300/irq.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7300/irq.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 7300 Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/mach/se7300.h>
-
-/*
- * Initialize IRQ setting
- */
-void __init
-init_7300se_IRQ(void)
-{
- ctrl_outw(0x0028, PA_EPLD_MODESET); /* mode set IRQ0,1 active low. */
- ctrl_outw(0xa000, INTC_ICR1); /* IRQ mode; IRQ0,1 enable. */
- ctrl_outw(0x0000, PORT_PFCR); /* use F for IRQ[3:0] and SIU. */
-
- /* PC_IRQ[0-3] -> IRQ0 (32) */
- make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ);
- /* A_IRQ[0-3] -> IRQ1 (33) */
- make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ);
- make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
- make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
- make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
- make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
-
- ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */
-}
diff --git a/arch/sh/boards/se/7300/led.c b/arch/sh/boards/se/7300/led.c
deleted file mode 100644
index ad51f0a9c1e..00000000000
--- a/arch/sh/boards/se/7300/led.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7300/led.c
- *
- * Derived from linux/arch/sh/boards/se/770x/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <linux/sched.h>
-#include <asm/mach/se7300.h>
-
-static void
-mach_led(int position, int value)
-{
- volatile unsigned short *p = (volatile unsigned short *) PA_LED;
-
- if (value) {
- *p |= (1 << 8);
- } else {
- *p &= ~(1 << 8);
- }
-}
-
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void
-heartbeat_7300se(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short *p = (volatile unsigned short *) PA_LED;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
-
- if (up) {
- if (bit == 7) {
- bit--;
- up = 0;
- } else {
- bit++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up = 1;
- } else {
- bit--;
- }
- }
- *p = 1 << (bit + 8);
-
-}
-
diff --git a/arch/sh/boards/se/7300/setup.c b/arch/sh/boards/se/7300/setup.c
deleted file mode 100644
index ebcd98d4c08..00000000000
--- a/arch/sh/boards/se/7300/setup.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7300/setup.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- *
- * SH-Mobile SolutionEngine 7300 Support.
- *
- */
-
-#include <linux/init.h>
-#include <asm/machvec.h>
-#include <asm/machvec_init.h>
-#include <asm/mach/io.h>
-
-void heartbeat_7300se(void);
-void init_7300se_IRQ(void);
-
-const char *
-get_system_type(void)
-{
- return "SolutionEngine 7300";
-}
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_7300se __initmv = {
- .mv_nr_irqs = 109,
- .mv_inb = sh7300se_inb,
- .mv_inw = sh7300se_inw,
- .mv_inl = sh7300se_inl,
- .mv_outb = sh7300se_outb,
- .mv_outw = sh7300se_outw,
- .mv_outl = sh7300se_outl,
-
- .mv_inb_p = sh7300se_inb_p,
- .mv_inw_p = sh7300se_inw,
- .mv_inl_p = sh7300se_inl,
- .mv_outb_p = sh7300se_outb_p,
- .mv_outw_p = sh7300se_outw,
- .mv_outl_p = sh7300se_outl,
-
- .mv_insb = sh7300se_insb,
- .mv_insw = sh7300se_insw,
- .mv_insl = sh7300se_insl,
- .mv_outsb = sh7300se_outsb,
- .mv_outsw = sh7300se_outsw,
- .mv_outsl = sh7300se_outsl,
-
- .mv_init_irq = init_7300se_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_7300se,
-#endif
-};
-
-ALIAS_MV(7300se)
-/*
- * Initialize the board
- */
-void __init
-platform_setup(void)
-{
-
-}
diff --git a/arch/sh/boards/se/73180/Makefile b/arch/sh/boards/se/73180/Makefile
deleted file mode 100644
index 8f63886a0f3..00000000000
--- a/arch/sh/boards/se/73180/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the 73180 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o
-
-obj-$(CONFIG_HEARTBEAT) += led.o
diff --git a/arch/sh/boards/se/73180/io.c b/arch/sh/boards/se/73180/io.c
deleted file mode 100644
index 755df5ac4a4..00000000000
--- a/arch/sh/boards/se/73180/io.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * arch/sh/boards/se/73180/io.c
- *
- * Copyright (C) 2003 YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
- * Based on arch/sh/boards/se/7300/io.c
- *
- * I/O routine for SH-Mobile3 73180 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <asm/mach/se73180.h>
-#include <asm/io.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
- unsigned long start, end;
- unsigned long base;
- struct iop *(*check) (struct iop * p, unsigned long port);
- unsigned char (*inb) (struct iop * p, unsigned long port);
- unsigned short (*inw) (struct iop * p, unsigned long port);
- void (*outb) (struct iop * p, unsigned char value, unsigned long port);
- void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
- if ((p->start <= port) && (port <= p->end))
- return p;
- else
- badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
- if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
- return p;
- return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
- return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
- return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- *(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
- *(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
- unsigned long v;
-
- if (port & 1)
- addr += 0x00400000;
- v = *(volatile unsigned char *) addr;
- return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
-
- if (port & 1)
- addr += 0x00400000;
- *(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
- badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- badio(inw, port);
-}
-
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
- .start = 0x300,
- .end = 0x30f,
- .base = 0xb4000000,
- .check = simple_check,
- .inb = simple_inb,
- .inw = simple_inw,
- .outb = simple_outb,
- .outw = simple_outw,
-};
-
-/* NE2000 pc card NIC */
-static struct iop neiop = {
- .start = 0x280,
- .end = 0x29f,
- .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */
- .check = simple_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-
-/* CF in CF slot */
-static struct iop cfiop = {
- .base = 0xb0600000,
- .check = ide_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
- if (0) ;
-#if defined(CONFIG_SMC91111)
- else if (laniop.check(&laniop, port))
- return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
- else if (neiop.check(&neiop, port))
- return &neiop;
-#endif
-#if defined(CONFIG_IDE)
- else if (cfiop.check(&cfiop, port))
- return &cfiop;
-#endif
- else
- return &neiop; /* fallback */
-}
-
-static inline void
-delay(void)
-{
- ctrl_inw(0xac000000);
- ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh73180se_inb(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inb) (p, port);
-}
-
-unsigned char
-sh73180se_inb_p(unsigned long port)
-{
- unsigned char v = sh73180se_inb(port);
- delay();
- return v;
-}
-
-unsigned short
-sh73180se_inw(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inw) (p, port);
-}
-
-unsigned int
-sh73180se_inl(unsigned long port)
-{
- badio(inl, port);
-}
-
-void
-sh73180se_outb(unsigned char value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outb) (p, value, port);
-}
-
-void
-sh73180se_outb_p(unsigned char value, unsigned long port)
-{
- sh73180se_outb(value, port);
- delay();
-}
-
-void
-sh73180se_outw(unsigned short value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outw) (p, value, port);
-}
-
-void
-sh73180se_outl(unsigned int value, unsigned long port)
-{
- badio(outl, port);
-}
-
-void
-sh73180se_insb(unsigned long port, void *addr, unsigned long count)
-{
- unsigned char *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inb) (p, port);
-}
-
-void
-sh73180se_insw(unsigned long port, void *addr, unsigned long count)
-{
- unsigned short *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inw) (p, port);
-}
-
-void
-sh73180se_insl(unsigned long port, void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void
-sh73180se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned char *a = (unsigned char *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outb) (p, *a++, port);
-}
-
-void
-sh73180se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned short *a = (unsigned short *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outw) (p, *a++, port);
-}
-
-void
-sh73180se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- badio(outsw, port);
-}
diff --git a/arch/sh/boards/se/73180/irq.c b/arch/sh/boards/se/73180/irq.c
deleted file mode 100644
index 4344d0ef24a..00000000000
--- a/arch/sh/boards/se/73180/irq.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * arch/sh/boards/se/73180/irq.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Based on arch/sh/boards/se/7300/irq.c
- *
- * Modified for SH-Mobile SolutionEngine 73180 Support
- * by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
- *
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/mach/se73180.h>
-
-static int
-intreq2irq(int i)
-{
- if (i == 5)
- return 10;
- return 32 + 7 - i;
-}
-
-static int
-irq2intreq(int irq)
-{
- if (irq == 10)
- return 5;
- return 7 - (irq - 32);
-}
-
-static void
-disable_intreq_irq(unsigned int irq)
-{
- ctrl_outb(1 << (7 - irq2intreq(irq)), INTMSK0);
-}
-
-static void
-enable_intreq_irq(unsigned int irq)
-{
- ctrl_outb(1 << (7 - irq2intreq(irq)), INTMSKCLR0);
-}
-
-static void
-mask_and_ack_intreq_irq(unsigned int irq)
-{
- disable_intreq_irq(irq);
-}
-
-static unsigned int
-startup_intreq_irq(unsigned int irq)
-{
- enable_intreq_irq(irq);
- return 0;
-}
-
-static void
-shutdown_intreq_irq(unsigned int irq)
-{
- disable_intreq_irq(irq);
-}
-
-static void
-end_intreq_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- enable_intreq_irq(irq);
-}
-
-static struct hw_interrupt_type intreq_irq_type = {
- .typename = "intreq",
- .startup = startup_intreq_irq,
- .shutdown = shutdown_intreq_irq,
- .enable = enable_intreq_irq,
- .disable = disable_intreq_irq,
- .ack = mask_and_ack_intreq_irq,
- .end = end_intreq_irq
-};
-
-void
-make_intreq_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].chip = &intreq_irq_type;
- disable_intreq_irq(irq);
-}
-
-int
-shmse_irq_demux(int irq)
-{
- if (irq == IRQ5_IRQ)
- return 10;
- return irq;
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init
-init_73180se_IRQ(void)
-{
- make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
-
- ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
- ctrl_outw(0x2000, 0xb07fffec); /* mrshpc irq enable */
- ctrl_outl(3 << ((7 - 5) * 4), INTC_INTPRI0); /* irq5 pri=3 */
- ctrl_outw(2 << ((7 - 5) * 2), INTC_ICR1); /* low-level irq */
- make_intreq_irq(10);
-
- make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8);
-
- ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */
-
- make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
- make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
- make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
- make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
- make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
- IIC0_PRIORITY);
- make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
- IIC0_PRIORITY);
- make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
- make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
- make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY);
-
- /* VIO interrupt */
- make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
- make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
- make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
-
- make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY);
- ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */
-}
diff --git a/arch/sh/boards/se/73180/led.c b/arch/sh/boards/se/73180/led.c
deleted file mode 100644
index 610439fde6e..00000000000
--- a/arch/sh/boards/se/73180/led.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * arch/sh/boards/se/73180/led.c
- *
- * Derived from arch/sh/boards/se/770x/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <linux/sched.h>
-#include <asm/mach/se73180.h>
-
-static void
-mach_led(int position, int value)
-{
- volatile unsigned short *p = (volatile unsigned short *) PA_LED;
-
- if (value) {
- *p |= (1 << LED_SHIFT);
- } else {
- *p &= ~(1 << LED_SHIFT);
- }
-}
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void
-heartbeat_73180se(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short *p = (volatile unsigned short *) PA_LED;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
-
- if (up) {
- if (bit == 7) {
- bit--;
- up = 0;
- } else {
- bit++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up = 1;
- } else {
- bit--;
- }
- }
- *p = 1 << (bit + LED_SHIFT);
-
-}
diff --git a/arch/sh/boards/se/73180/setup.c b/arch/sh/boards/se/73180/setup.c
deleted file mode 100644
index cdb7b5f8d94..00000000000
--- a/arch/sh/boards/se/73180/setup.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/sh/boards/se/73180/setup.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
- * Based on arch/sh/setup_shmse.c
- *
- * Modified for 73180 SolutionEngine
- * by YOSHII Takashi <yoshii-takashi@hitachi-ul.co.jp>
- *
- */
-
-#include <linux/init.h>
-#include <asm/machvec.h>
-#include <asm/machvec_init.h>
-#include <asm/mach/io.h>
-
-void heartbeat_73180se(void);
-void init_73180se_IRQ(void);
-
-const char *
-get_system_type(void)
-{
- return "SolutionEngine 73180";
-}
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_73180se __initmv = {
- .mv_nr_irqs = 108,
- .mv_inb = sh73180se_inb,
- .mv_inw = sh73180se_inw,
- .mv_inl = sh73180se_inl,
- .mv_outb = sh73180se_outb,
- .mv_outw = sh73180se_outw,
- .mv_outl = sh73180se_outl,
-
- .mv_inb_p = sh73180se_inb_p,
- .mv_inw_p = sh73180se_inw,
- .mv_inl_p = sh73180se_inl,
- .mv_outb_p = sh73180se_outb_p,
- .mv_outw_p = sh73180se_outw,
- .mv_outl_p = sh73180se_outl,
-
- .mv_insb = sh73180se_insb,
- .mv_insw = sh73180se_insw,
- .mv_insl = sh73180se_insl,
- .mv_outsb = sh73180se_outsb,
- .mv_outsw = sh73180se_outsw,
- .mv_outsl = sh73180se_outsl,
-
- .mv_init_irq = init_73180se_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_73180se,
-#endif
-};
-
-ALIAS_MV(73180se)
-/*
- * Initialize the board
- */
-void __init
-platform_setup(void)
-{
-
-}
diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/se/770x/Makefile
deleted file mode 100644
index be89a73cc41..00000000000
--- a/arch/sh/boards/se/770x/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the 770x SolutionEngine specific parts of the kernel
-#
-
-obj-y := mach.o setup.o io.o irq.o led.o
-
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c
deleted file mode 100644
index 9a39ee96314..00000000000
--- a/arch/sh/boards/se/770x/io.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/kernel/io_se.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * I/O routine for Hitachi SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se/se.h>
-
-/* SH pcmcia io window base, start and end. */
-int sh_pcic_io_wbase = 0xb8400000;
-int sh_pcic_io_start;
-int sh_pcic_io_stop;
-int sh_pcic_io_type;
-int sh_pcic_io_dummy;
-
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000);
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
- PC-like io ports are located at upper half byte of 16-bit word which
- can be accessed only with 16-bit wide. */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
- if (port >= 0x2000)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
- else if (port >= 0x1000)
- return (volatile __u16 *) (PA_83902 + (port << 1));
- else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
- return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1));
- else
- return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-}
-
-static inline int
-shifted_port(unsigned long port)
-{
- /* For IDE registers, value is not shifted */
- if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
- return 0;
- else
- return 1;
-}
-
-#define maybebadio(name,port) \
- printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
-unsigned char se_inb(unsigned long port)
-{
- if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
- return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port);
- else if (shifted_port(port))
- return (*port2adr(port) >> 8);
- else
- return (*port2adr(port))&0xff;
-}
-
-unsigned char se_inb_p(unsigned long port)
-{
- unsigned long v;
-
- if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
- v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port);
- else if (shifted_port(port))
- v = (*port2adr(port) >> 8);
- else
- v = (*port2adr(port))&0xff;
- delay();
- return v;
-}
-
-unsigned short se_inw(unsigned long port)
-{
- if (port >= 0x2000 ||
- (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
- return *port2adr(port);
- else
- maybebadio(inw, port);
- return 0;
-}
-
-unsigned int se_inl(unsigned long port)
-{
- maybebadio(inl, port);
- return 0;
-}
-
-void se_outb(unsigned char value, unsigned long port)
-{
- if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
- *(__u8 *)(sh_pcic_io_wbase + port) = value;
- else if (shifted_port(port))
- *(port2adr(port)) = value << 8;
- else
- *(port2adr(port)) = value;
-}
-
-void se_outb_p(unsigned char value, unsigned long port)
-{
- if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
- *(__u8 *)(sh_pcic_io_wbase + port) = value;
- else if (shifted_port(port))
- *(port2adr(port)) = value << 8;
- else
- *(port2adr(port)) = value;
- delay();
-}
-
-void se_outw(unsigned short value, unsigned long port)
-{
- if (port >= 0x2000 ||
- (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
- *port2adr(port) = value;
- else
- maybebadio(outw, port);
-}
-
-void se_outl(unsigned int value, unsigned long port)
-{
- maybebadio(outl, port);
-}
-
-void se_insb(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u8 *ap = addr;
-
- if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
- volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port);
- while (count--)
- *ap++ = *bp;
- } else if (shifted_port(port)) {
- while (count--)
- *ap++ = *p >> 8;
- } else {
- while (count--)
- *ap++ = *p;
- }
-}
-
-void se_insw(unsigned long port, void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- __u16 *ap = addr;
- while (count--)
- *ap++ = *p;
-}
-
-void se_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(insl, port);
-}
-
-void se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u8 *ap = addr;
-
- if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
- volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port);
- while (count--)
- *bp = *ap++;
- } else if (shifted_port(port)) {
- while (count--)
- *p = *ap++ << 8;
- } else {
- while (count--)
- *p = *ap++;
- }
-}
-
-void se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- volatile __u16 *p = port2adr(port);
- const __u16 *ap = addr;
- while (count--)
- *p = *ap++;
-}
-
-void se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(outsw, port);
-}
-
-/* Map ISA bus address to the real address. Only for PCMCIA. */
-
-/* ISA page descriptor. */
-static __u32 sh_isa_memmap[256];
-
-static int
-sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
- int idx;
-
- if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
- return -1;
-
- idx = start >> 12;
- sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
-#if 0
- printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
- start, length, offset, idx, sh_isa_memmap[idx]);
-#endif
- return 0;
-}
-
-unsigned long
-se_isa_port2addr(unsigned long offset)
-{
- int idx;
-
- idx = (offset >> 12) & 0xff;
- offset &= 0xfff;
- return sh_isa_memmap[idx] + offset;
-}
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c
deleted file mode 100644
index 3e558716ce1..00000000000
--- a/arch/sh/boards/se/770x/irq.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * linux/arch/sh/boards/se/770x/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se/se.h>
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se_IRQ(void)
-{
- /*
- * Super I/O (Just mimic PC):
- * 1: keyboard
- * 3: serial 0
- * 4: serial 1
- * 5: printer
- * 6: floppy
- * 8: rtc
- * 12: mouse
- * 14: ide0
- */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
- /* Disable all interrupts */
- ctrl_outw(0, BCR_ILCRA);
- ctrl_outw(0, BCR_ILCRB);
- ctrl_outw(0, BCR_ILCRC);
- ctrl_outw(0, BCR_ILCRD);
- ctrl_outw(0, BCR_ILCRE);
- ctrl_outw(0, BCR_ILCRF);
- ctrl_outw(0, BCR_ILCRG);
- /* This is default value */
- make_ipr_irq(0xf-0x2, BCR_ILCRA, 2, 0x2);
- make_ipr_irq(0xf-0xa, BCR_ILCRA, 1, 0xa);
- make_ipr_irq(0xf-0x5, BCR_ILCRB, 0, 0x5);
- make_ipr_irq(0xf-0x8, BCR_ILCRC, 1, 0x8);
- make_ipr_irq(0xf-0xc, BCR_ILCRC, 0, 0xc);
- make_ipr_irq(0xf-0xe, BCR_ILCRD, 3, 0xe);
- make_ipr_irq(0xf-0x3, BCR_ILCRD, 1, 0x3); /* LAN */
- make_ipr_irq(0xf-0xd, BCR_ILCRE, 2, 0xd);
- make_ipr_irq(0xf-0x9, BCR_ILCRE, 1, 0x9);
- make_ipr_irq(0xf-0x1, BCR_ILCRE, 0, 0x1);
- make_ipr_irq(0xf-0xf, BCR_ILCRF, 3, 0xf);
- make_ipr_irq(0xf-0xb, BCR_ILCRF, 1, 0xb);
- make_ipr_irq(0xf-0x7, BCR_ILCRG, 3, 0x7);
- make_ipr_irq(0xf-0x6, BCR_ILCRG, 2, 0x6);
- make_ipr_irq(0xf-0x4, BCR_ILCRG, 1, 0x4);
-#else
- make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14);
- make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12);
- make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8);
- make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6);
- make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5);
- make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4);
- make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3);
- make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1);
-
- make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */
-
- make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */
- make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */
- make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */
- make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */
-
- /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
- /* NOTE: #2 and #13 are not used on PC */
- make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */
- make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */
-#endif
-}
diff --git a/arch/sh/boards/se/770x/led.c b/arch/sh/boards/se/770x/led.c
deleted file mode 100644
index 3cddbda025f..00000000000
--- a/arch/sh/boards/se/770x/led.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/sh/kernel/led_se.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <asm/se/se.h>
-
-static void mach_led(int position, int value)
-{
- volatile unsigned short* p = (volatile unsigned short*)PA_LED;
-
- if (value) {
- *p |= (1<<8);
- } else {
- *p &= ~(1<<8);
- }
-}
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_se(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short* p = (volatile unsigned short*)PA_LED;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ( (300<<FSHIFT)/
- ((avenrun[0]/5) + (3<<FSHIFT)) );
-
- if (up) {
- if (bit == 7) {
- bit--;
- up=0;
- } else {
- bit ++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up=1;
- } else {
- bit--;
- }
- }
- *p = 1<<(bit+8);
-
-}
-#endif /* CONFIG_HEARTBEAT */
diff --git a/arch/sh/boards/se/770x/mach.c b/arch/sh/boards/se/770x/mach.c
deleted file mode 100644
index 6ec07bd3dcf..00000000000
--- a/arch/sh/boards/se/770x/mach.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_se.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the Hitachi SolutionEngine
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/se/io.h>
-
-void heartbeat_se(void);
-void setup_se(void);
-void init_se_IRQ(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_se __initmv = {
-#if defined(CONFIG_CPU_SH4)
- .mv_nr_irqs = 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
- .mv_nr_irqs = 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
- .mv_nr_irqs = 61,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
- .mv_nr_irqs = 86,
-#endif
-
- .mv_inb = se_inb,
- .mv_inw = se_inw,
- .mv_inl = se_inl,
- .mv_outb = se_outb,
- .mv_outw = se_outw,
- .mv_outl = se_outl,
-
- .mv_inb_p = se_inb_p,
- .mv_inw_p = se_inw,
- .mv_inl_p = se_inl,
- .mv_outb_p = se_outb_p,
- .mv_outw_p = se_outw,
- .mv_outl_p = se_outl,
-
- .mv_insb = se_insb,
- .mv_insw = se_insw,
- .mv_insl = se_insl,
- .mv_outsb = se_outsb,
- .mv_outsw = se_outsw,
- .mv_outsl = se_outsl,
-
- .mv_isa_port2addr = se_isa_port2addr,
-
- .mv_init_irq = init_se_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_se,
-#endif
-};
-ALIAS_MV(se)
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
deleted file mode 100644
index 7d1a071727c..00000000000
--- a/arch/sh/boards/se/770x/setup.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* $Id: setup.c,v 1.1.2.4 2002/03/02 21:57:07 lethal Exp $
- *
- * linux/arch/sh/boards/se/770x/setup.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <asm/io.h>
-#include <asm/se/se.h>
-#include <asm/se/smc37c93x.h>
-
-/*
- * Configure the Super I/O chip
- */
-static void __init smsc_config(int index, int data)
-{
- outb_p(index, INDEX_PORT);
- outb_p(data, DATA_PORT);
-}
-
-static void __init init_smsc(void)
-{
- outb_p(CONFIG_ENTER, CONFIG_PORT);
- outb_p(CONFIG_ENTER, CONFIG_PORT);
-
- /* FDC */
- smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
- /* IDE1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_IDE1);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */
-
- /* AUXIO (GPIO): to use IDE1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
- smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
- smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
- /* COM1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x03);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
- /* COM2 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x02);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
- /* RTC */
- smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
- /* XXX: PARPORT, KBD, and MOUSE will come here... */
- outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-
-const char *get_system_type(void)
-{
- return "SolutionEngine";
-}
-
-/*
- * Initialize the board
- */
-void __init platform_setup(void)
-{
- init_smsc();
- /* XXX: RTC setting comes here */
-}
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/se/7751/Makefile
deleted file mode 100644
index ce7ca247f84..00000000000
--- a/arch/sh/boards/se/7751/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the 7751 SolutionEngine specific parts of the kernel
-#
-
-obj-y := mach.o setup.o io.o irq.o led.o
-
-obj-$(CONFIG_PCI) += pci.o
-
diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c
deleted file mode 100644
index 99041b26926..00000000000
--- a/arch/sh/boards/se/7751/io.c
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * linux/arch/sh/kernel/io_7751se.c
- *
- * Copyright (C) 2001 Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se7751/se7751.h>
-#include <asm/addrspace.h>
-
-#include <linux/pci.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-#if 0
-/******************************************************************
- * Variables from io_se.c, related to PCMCIA (not PCI); we're not
- * compiling them in, and have removed references from functions
- * which follow. [Many checked for IO ports in the range bounded
- * by sh_pcic_io_start/stop, and used sh_pcic_io_wbase as offset.
- * As start/stop are uninitialized, only port 0x0 would match?]
- * When used, remember to adjust names to avoid clash with io_se?
- *****************************************************************/
-/* SH pcmcia io window base, start and end. */
-int sh_pcic_io_wbase = 0xb8400000;
-int sh_pcic_io_start;
-int sh_pcic_io_stop;
-int sh_pcic_io_type;
-int sh_pcic_io_dummy;
-/*************************************************************/
-#endif
-
-/*
- * The 7751 Solution Engine uses the built-in PCI controller (PCIC)
- * of the 7751 processor, and has a SuperIO accessible via the PCI.
- * The board also includes a PCMCIA controller on its memory bus,
- * like the other Solution Engine boards.
- */
-
-#define PCIIOBR (volatile long *)PCI_REG(SH7751_PCIIOBR)
-#define PCIMBR (volatile long *)PCI_REG(SH7751_PCIMBR)
-#define PCI_IO_AREA SH7751_PCI_IO_BASE
-#define PCI_MEM_AREA SH7751_PCI_CONFIG_BASE
-
-#define PCI_IOMAP(adr) (PCI_IO_AREA + (adr & ~SH7751_PCIIOBR_MASK))
-
-#define maybebadio(name,port) \
- printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
-static inline void delay(void)
-{
- ctrl_inw(0xa0000000);
-}
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
- if (port >= 0x2000)
- return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-#if 0
- else
- return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-#endif
- maybebadio(name,(unsigned long)port);
- return (volatile __u16*)port;
-}
-
-#if 0
-/* The 7751 Solution Engine seems to have everything hooked */
-/* up pretty normally (nothing on high-bytes only...) so this */
-/* shouldn't be needed */
-static inline int
-shifted_port(unsigned long port)
-{
- /* For IDE registers, value is not shifted */
- if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
- return 0;
- else
- return 1;
-}
-#endif
-
-/* In case someone configures the kernel w/o PCI support: in that */
-/* scenario, don't ever bother to check for PCI-window addresses */
-
-/* NOTE: WINDOW CHECK MAY BE A BIT OFF, HIGH PCIBIOS_MIN_IO WRAPS? */
-#if defined(CONFIG_PCI)
-#define CHECK_SH7751_PCIIO(port) \
- ((port >= PCIBIOS_MIN_IO) && (port < (PCIBIOS_MIN_IO + SH7751_PCI_IO_SIZE)))
-#else
-#define CHECK_SH7751_PCIIO(port) (0)
-#endif
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window. Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned char *)PCI_IOMAP(port);
- else
- return (*port2adr(port))&0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
- unsigned char v;
-
- if (PXSEG(port))
- v = *(volatile unsigned char *)port;
- else if (CHECK_SH7751_PCIIO(port))
- v = *(volatile unsigned char *)PCI_IOMAP(port);
- else
- v = (*port2adr(port))&0xff;
- delay();
- return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned short *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned short *)PCI_IOMAP(port);
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(inw, port);
- return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
- if (PXSEG(port))
- return *(volatile unsigned long *)port;
- else if (CHECK_SH7751_PCIIO(port))
- return *(volatile unsigned int *)PCI_IOMAP(port);
- else if (port >= 0x2000)
- return *port2adr(port);
- else
- maybebadio(inl, port);
- return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned char*)PCI_IOMAP(port)) = value;
- else
- *(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned char *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned char*)PCI_IOMAP(port)) = value;
- else
- *(port2adr(port)) = value;
- delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned short *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned short *)PCI_IOMAP(port)) = value;
- else if (port >= 0x2000)
- *port2adr(port) = value;
- else
- maybebadio(outw, port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
- if (PXSEG(port))
- *(volatile unsigned long *)port = value;
- else if (CHECK_SH7751_PCIIO(port))
- *((unsigned long*)PCI_IOMAP(port)) = value;
- else
- maybebadio(outl, port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
- maybebadio(insl, port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- maybebadio(outsw, port);
-}
-
-/* Map ISA bus address to the real address. Only for PCMCIA. */
-
-/* ISA page descriptor. */
-static __u32 sh_isa_memmap[256];
-
-#if 0
-static int
-sh_isa_mmap(__u32 start, __u32 length, __u32 offset)
-{
- int idx;
-
- if (start >= 0x100000 || (start & 0xfff) || (length != 0x1000))
- return -1;
-
- idx = start >> 12;
- sh_isa_memmap[idx] = 0xb8000000 + (offset &~ 0xfff);
- printk("sh_isa_mmap: start %x len %x offset %x (idx %x paddr %x)\n",
- start, length, offset, idx, sh_isa_memmap[idx]);
- return 0;
-}
-#endif
-
-unsigned long
-sh7751se_isa_port2addr(unsigned long offset)
-{
- int idx;
-
- idx = (offset >> 12) & 0xff;
- offset &= 0xfff;
- return sh_isa_memmap[idx] + offset;
-}
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c
deleted file mode 100644
index bf6c023615d..00000000000
--- a/arch/sh/boards/se/7751/irq.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/irq.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/se7751/se7751.h>
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7751se_IRQ(void)
-{
-
- /* Leave old Solution Engine code in for reference. */
-#if defined(CONFIG_SH_SOLUTION_ENGINE)
- /*
- * Super I/O (Just mimic PC):
- * 1: keyboard
- * 3: serial 0
- * 4: serial 1
- * 5: printer
- * 6: floppy
- * 8: rtc
- * 12: mouse
- * 14: ide0
- */
- make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14);
- make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12);
- make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8);
- make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6);
- make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5);
- make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4);
- make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3);
- make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1);
-
- make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */
-
- make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */
- make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */
- make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */
- make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */
-
- /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
- /* NOTE: #2 and #13 are not used on PC */
- make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */
- make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */
-
-#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE)
-
- make_ipr_irq(13, BCR_ILCRD, 3, 2);
-
- /* Add additional calls to make_ipr_irq() as drivers are added
- * and tested.
- */
-#endif
-
-}
diff --git a/arch/sh/boards/se/7751/led.c b/arch/sh/boards/se/7751/led.c
deleted file mode 100644
index a878726d3c7..00000000000
--- a/arch/sh/boards/se/7751/led.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * linux/arch/sh/kernel/led_se.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <asm/se7751/se7751.h>
-
-static void mach_led(int position, int value)
-{
- volatile unsigned short* p = (volatile unsigned short*)PA_LED;
-
- if (value) {
- *p |= (1<<8);
- } else {
- *p &= ~(1<<8);
- }
-}
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_7751se(void)
-{
- static unsigned int cnt = 0, period = 0;
- volatile unsigned short* p = (volatile unsigned short*)PA_LED;
- static unsigned bit = 0, up = 1;
-
- cnt += 1;
- if (cnt < period) {
- return;
- }
-
- cnt = 0;
-
- /* Go through the points (roughly!):
- * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
- */
- period = 110 - ( (300<<FSHIFT)/
- ((avenrun[0]/5) + (3<<FSHIFT)) );
-
- if (up) {
- if (bit == 7) {
- bit--;
- up=0;
- } else {
- bit ++;
- }
- } else {
- if (bit == 0) {
- bit++;
- up=1;
- } else {
- bit--;
- }
- }
- *p = 1<<(bit+8);
-
-}
-#endif /* CONFIG_HEARTBEAT */
diff --git a/arch/sh/boards/se/7751/mach.c b/arch/sh/boards/se/7751/mach.c
deleted file mode 100644
index 62d8d3e6259..00000000000
--- a/arch/sh/boards/se/7751/mach.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * linux/arch/sh/kernel/mach_7751se.c
- *
- * Minor tweak of mach_se.c file to reference 7751se-specific items.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the Hitachi 7751 SolutionEngine
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/se7751/io.h>
-
-void heartbeat_7751se(void);
-void init_7751se_IRQ(void);
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_7751se __initmv = {
- .mv_nr_irqs = 72,
-
- .mv_inb = sh7751se_inb,
- .mv_inw = sh7751se_inw,
- .mv_inl = sh7751se_inl,
- .mv_outb = sh7751se_outb,
- .mv_outw = sh7751se_outw,
- .mv_outl = sh7751se_outl,
-
- .mv_inb_p = sh7751se_inb_p,
- .mv_inw_p = sh7751se_inw,
- .mv_inl_p = sh7751se_inl,
- .mv_outb_p = sh7751se_outb_p,
- .mv_outw_p = sh7751se_outw,
- .mv_outl_p = sh7751se_outl,
-
- .mv_insl = sh7751se_insl,
- .mv_outsl = sh7751se_outsl,
-
- .mv_isa_port2addr = sh7751se_isa_port2addr,
-
- .mv_init_irq = init_7751se_IRQ,
-#ifdef CONFIG_HEARTBEAT
- .mv_heartbeat = heartbeat_7751se,
-#endif
-};
-ALIAS_MV(7751se)
diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/se/7751/pci.c
deleted file mode 100644
index 3ee03014dea..00000000000
--- a/arch/sh/boards/se/7751/pci.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * linux/arch/sh/kernel/pci-7751se.c
- *
- * Author: Ian DaSilva (idasilva@mvista.com)
- *
- * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01)
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-#include "../../../drivers/pci/pci-sh7751.h"
-
-#define PCIMCR_MRSET_OFF 0xBFFFFFFF
-#define PCIMCR_RFSH_OFF 0xFFFFFFFB
-
-/*
- * Only long word accesses of the PCIC's internal local registers and the
- * configuration registers from the CPU is supported.
- */
-#define PCIC_WRITE(x,v) writel((v), PCI_REG(x))
-#define PCIC_READ(x) readl(PCI_REG(x))
-
-/*
- * Description: This function sets up and initializes the pcic, sets
- * up the BARS, maps the DRAM into the address space etc, etc.
- */
-int __init pcibios_init_platform(void)
-{
- unsigned long bcr1, wcr1, wcr2, wcr3, mcr;
- unsigned short bcr2;
-
- /*
- * Initialize the slave bus controller on the pcic. The values used
- * here should not be hardcoded, but they should be taken from the bsc
- * on the processor, to make this function as generic as possible.
- * (i.e. Another sbc may usr different SDRAM timing settings -- in order
- * for the pcic to work, its settings need to be exactly the same.)
- */
- bcr1 = (*(volatile unsigned long*)(SH7751_BCR1));
- bcr2 = (*(volatile unsigned short*)(SH7751_BCR2));
- wcr1 = (*(volatile unsigned long*)(SH7751_WCR1));
- wcr2 = (*(volatile unsigned long*)(SH7751_WCR2));
- wcr3 = (*(volatile unsigned long*)(SH7751_WCR3));
- mcr = (*(volatile unsigned long*)(SH7751_MCR));
-
- bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */
- (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1;
-
- bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */
- PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */
- PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */
- PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */
- PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */
- PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */
- mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
- PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */
-
-
- /* Enable all interrupts, so we know what to fix */
- PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff);
- PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f);
-
- /* Set up standard PCI config registers */
- PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */
- PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */
- PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */
- PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */
- PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */
- PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */
- PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */
- PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */
- PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */
- PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */
-
- /* Now turn it on... */
- PCIC_WRITE(SH7751_PCICR, 0xa5000001);
-
- /*
- * Set PCIMBR and PCIIOBR here, assuming a single window
- * (16M MEM, 256K IO) is enough. If a larger space is
- * needed, the readx/writex and inx/outx functions will
- * have to do more (e.g. setting registers for each call).
- */
-
- /*
- * Set the MBR so PCI address is one-to-one with window,
- * meaning all calls go straight through... use BUG_ON to
- * catch erroneous assumption.
- */
- BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE);
-
- PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM);
-
- /* Set IOBR for window containing area specified in pci.h */
- PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK));
-
- /* All done, may as well say so... */
- printk("SH7751 PCI: Finished initialization of the PCI controller\n");
-
- return 1;
-}
-
-int __init pcibios_map_platform_irq(u8 slot, u8 pin)
-{
- switch (slot) {
- case 0: return 13;
- case 1: return 13; /* AMD Ethernet controller */
- case 2: return -1;
- case 3: return -1;
- case 4: return -1;
- default:
- printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
- return -1;
- }
-}
-
-static struct resource sh7751_io_resource = {
- .name = "SH7751 IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource sh7751_mem_resource = {
- .name = "SH7751 mem",
- .start = SH7751_PCI_MEMORY_BASE,
- .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
- { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
- { NULL, NULL, NULL, 0, 0 },
-};
-
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
deleted file mode 100644
index 48dc5aee67d..00000000000
--- a/arch/sh/boards/se/7751/setup.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * linux/arch/sh/kernel/setup_7751se.c
- *
- * Copyright (C) 2000 Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <asm/io.h>
-#include <asm/se7751/se7751.h>
-
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-#endif
-
-/*
- * Configure the Super I/O chip
- */
-#if 0
-/* Leftover code from regular Solution Engine, for reference. */
-/* The SH7751 Solution Engine has a different SuperIO. */
-static void __init smsc_config(int index, int data)
-{
- outb_p(index, INDEX_PORT);
- outb_p(data, DATA_PORT);
-}
-
-static void __init init_smsc(void)
-{
- outb_p(CONFIG_ENTER, CONFIG_PORT);
- outb_p(CONFIG_ENTER, CONFIG_PORT);
-
- /* FDC */
- smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
- /* IDE1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_IDE1);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */
-
- /* AUXIO (GPIO): to use IDE1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
- smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
- smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
- /* COM1 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x03);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
- /* COM2 */
- smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IO_BASE_HI_INDEX, 0x02);
- smsc_config(IO_BASE_LO_INDEX, 0xf8);
- smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
- /* RTC */
- smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
- smsc_config(ACTIVATE_INDEX, 0x01);
- smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
- /* XXX: PARPORT, KBD, and MOUSE will come here... */
- outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-#endif
-
-const char *get_system_type(void)
-{
- return "7751 SolutionEngine";
-}
-
-#ifdef CONFIG_SH_KGDB
-static int kgdb_uart_setup(void);
-static struct kgdb_sermap kgdb_uart_sermap =
-{ "ttyS", 0, kgdb_uart_setup, NULL };
-#endif
-
-/*
- * Initialize the board
- */
-void __init platform_setup(void)
-{
- /* Call init_smsc() replacement to set up SuperIO. */
- /* XXX: RTC setting comes here */
-#ifdef CONFIG_SH_KGDB
- kgdb_register_sermap(&kgdb_uart_sermap);
-#endif
-}
-
-/*********************************************************************
- * Currently a hack (e.g. does not interact well w/serial.c, lots of *
- * hardcoded stuff) but may be useful if SCI/F needs debugging. *
- * Mostly copied from x86 code (see files asm-i386/kgdb_local.h and *
- * arch/i386/lib/kgdb_serial.c). *
- *********************************************************************/
-
-#ifdef CONFIG_SH_KGDB
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#define COM1_PORT 0x3f8 /* Base I/O address */
-#define COM1_IRQ 4 /* IRQ not used yet */
-#define COM2_PORT 0x2f8 /* Base I/O address */
-#define COM2_IRQ 3 /* IRQ not used yet */
-
-#define SB_CLOCK 1843200 /* Serial baud clock */
-#define SB_BASE (SB_CLOCK/16)
-#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS
-
-struct uart_port {
- int base;
-};
-#define UART_NPORTS 2
-struct uart_port uart_ports[] = {
- { COM1_PORT },
- { COM2_PORT },
-};
-struct uart_port *kgdb_uart_port;
-
-#define UART_IN(reg) inb_p(kgdb_uart_port->base + reg)
-#define UART_OUT(reg,v) outb_p((v), kgdb_uart_port->base + reg)
-
-/* Basic read/write functions for the UART */
-#define UART_LSR_RXCERR (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE)
-static int kgdb_uart_getchar(void)
-{
- int lsr;
- int c = -1;
-
- while (c == -1) {
- lsr = UART_IN(UART_LSR);
- if (lsr & UART_LSR_DR)
- c = UART_IN(UART_RX);
- if ((lsr & UART_LSR_RXCERR))
- c = -1;
- }
- return c;
-}
-
-static void kgdb_uart_putchar(int c)
-{
- while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0)
- ;
- UART_OUT(UART_TX, c);
-}
-
-/*
- * Initialize UART to configured/requested values.
- * (But we don't interrupts yet, or interact w/serial.c)
- */
-static int kgdb_uart_setup(void)
-{
- int port;
- int lcr = 0;
- int bdiv = 0;
-
- if (kgdb_portnum >= UART_NPORTS) {
- KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum);
- return -1;
- }
-
- kgdb_uart_port = &uart_ports[kgdb_portnum];
-
- /* Init sequence from gdb_hook_interrupt */
- UART_IN(UART_RX);
- UART_OUT(UART_IER, 0);
-
- UART_IN(UART_RX); /* Serial driver comments say */
- UART_IN(UART_IIR); /* this clears interrupt regs */
- UART_IN(UART_MSR);
-
- /* Figure basic LCR values */
- switch (kgdb_bits) {
- case '7':
- lcr |= UART_LCR_WLEN7;
- break;
- default: case '8':
- lcr |= UART_LCR_WLEN8;
- break;
- }
- switch (kgdb_parity) {
- case 'O':
- lcr |= UART_LCR_PARITY;
- break;
- case 'E':
- lcr |= (UART_LCR_PARITY | UART_LCR_EPAR);
- break;
- default: break;
- }
-
- /* Figure the baud rate divisor */
- bdiv = (SB_BASE/kgdb_baud);
-
- /* Set the baud rate and LCR values */
- UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB));
- UART_OUT(UART_DLL, (bdiv & 0xff));
- UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff));
- UART_OUT(UART_LCR, lcr);
-
- /* Set the MCR */
- UART_OUT(UART_MCR, SB_MCR);
-
- /* Turn off FIFOs for now */
- UART_OUT(UART_FCR, 0);
-
- /* Setup complete: initialize function pointers */
- kgdb_getchar = kgdb_uart_getchar;
- kgdb_putchar = kgdb_uart_putchar;
-
- return 0;
-}
-#endif /* CONFIG_SH_KGDB */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-14 23:36:15 +0000